1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qemu/units.h" 39 #include "qapi/error.h" 40 #include "qemu-common.h" 41 #include "qemu/error-report.h" 42 #include "hw/usb.h" 43 #include "desc.h" 44 45 #include "ccid.h" 46 47 #define DPRINTF(s, lvl, fmt, ...) \ 48 do { \ 49 if (lvl <= s->debug) { \ 50 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 51 } \ 52 } while (0) 53 54 #define D_WARN 1 55 #define D_INFO 2 56 #define D_MORE_INFO 3 57 #define D_VERBOSE 4 58 59 #define CCID_DEV_NAME "usb-ccid" 60 #define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME) 61 /* 62 * The two options for variable sized buffers: 63 * make them constant size, for large enough constant, 64 * or handle the migration complexity - VMState doesn't handle this case. 65 * sizes are expected never to be exceeded, unless guest misbehaves. 66 */ 67 #define BULK_OUT_DATA_SIZE (64 * KiB) 68 #define PENDING_ANSWERS_NUM 128 69 70 #define BULK_IN_BUF_SIZE 384 71 #define BULK_IN_PENDING_NUM 8 72 73 #define CCID_MAX_PACKET_SIZE 64 74 75 #define CCID_CONTROL_ABORT 0x1 76 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 77 #define CCID_CONTROL_GET_DATA_RATES 0x3 78 79 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 80 #define CCID_VENDOR_DESCRIPTION "QEMU" 81 #define CCID_INTERFACE_NAME "CCID Interface" 82 #define CCID_SERIAL_NUMBER_STRING "1" 83 /* 84 * Using Gemplus Vendor and Product id 85 * Effect on various drivers: 86 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 87 * linux has a number of class drivers, but openct filters based on 88 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 89 */ 90 #define CCID_VENDOR_ID 0x08e6 91 #define CCID_PRODUCT_ID 0x4433 92 #define CCID_DEVICE_VERSION 0x0000 93 94 /* 95 * BULK_OUT messages from PC to Reader 96 * Defined in CCID Rev 1.1 6.1 (page 26) 97 */ 98 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 99 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 100 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 111 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 112 113 /* 114 * BULK_IN messages from Reader to PC 115 * Defined in CCID Rev 1.1 6.2 (page 48) 116 */ 117 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 118 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 119 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 120 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 121 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 122 123 /* 124 * INTERRUPT_IN messages from Reader to PC 125 * Defined in CCID Rev 1.1 6.3 (page 56) 126 */ 127 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 128 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 129 130 /* 131 * Endpoints for CCID - addresses are up to us to decide. 132 * To support slot insertion and removal we must have an interrupt in ep 133 * in addition we need a bulk in and bulk out ep 134 * 5.2, page 20 135 */ 136 #define CCID_INT_IN_EP 1 137 #define CCID_BULK_IN_EP 2 138 #define CCID_BULK_OUT_EP 3 139 140 /* bmSlotICCState masks */ 141 #define SLOT_0_STATE_MASK 1 142 #define SLOT_0_CHANGED_MASK 2 143 144 /* Status codes that go in bStatus (see 6.2.6) */ 145 enum { 146 ICC_STATUS_PRESENT_ACTIVE = 0, 147 ICC_STATUS_PRESENT_INACTIVE, 148 ICC_STATUS_NOT_PRESENT 149 }; 150 151 enum { 152 COMMAND_STATUS_NO_ERROR = 0, 153 COMMAND_STATUS_FAILED, 154 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 155 }; 156 157 /* Error codes that go in bError (see 6.2.6) */ 158 enum { 159 ERROR_CMD_NOT_SUPPORTED = 0, 160 ERROR_CMD_ABORTED = -1, 161 ERROR_ICC_MUTE = -2, 162 ERROR_XFR_PARITY_ERROR = -3, 163 ERROR_XFR_OVERRUN = -4, 164 ERROR_HW_ERROR = -5, 165 }; 166 167 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 168 enum { 169 CLOCK_STATUS_RUNNING = 0, 170 /* 171 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 172 * 3 - unknown state. rest are RFU 173 */ 174 }; 175 176 typedef struct QEMU_PACKED CCID_Header { 177 uint8_t bMessageType; 178 uint32_t dwLength; 179 uint8_t bSlot; 180 uint8_t bSeq; 181 } CCID_Header; 182 183 typedef struct QEMU_PACKED CCID_BULK_IN { 184 CCID_Header hdr; 185 uint8_t bStatus; /* Only used in BULK_IN */ 186 uint8_t bError; /* Only used in BULK_IN */ 187 } CCID_BULK_IN; 188 189 typedef struct QEMU_PACKED CCID_SlotStatus { 190 CCID_BULK_IN b; 191 uint8_t bClockStatus; 192 } CCID_SlotStatus; 193 194 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 195 uint8_t bmFindexDindex; 196 uint8_t bmTCCKST0; 197 uint8_t bGuardTimeT0; 198 uint8_t bWaitingIntegerT0; 199 uint8_t bClockStop; 200 } CCID_T0ProtocolDataStructure; 201 202 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 203 uint8_t bmFindexDindex; 204 uint8_t bmTCCKST1; 205 uint8_t bGuardTimeT1; 206 uint8_t bWaitingIntegerT1; 207 uint8_t bClockStop; 208 uint8_t bIFSC; 209 uint8_t bNadValue; 210 } CCID_T1ProtocolDataStructure; 211 212 typedef union CCID_ProtocolDataStructure { 213 CCID_T0ProtocolDataStructure t0; 214 CCID_T1ProtocolDataStructure t1; 215 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 216 } CCID_ProtocolDataStructure; 217 218 typedef struct QEMU_PACKED CCID_Parameter { 219 CCID_BULK_IN b; 220 uint8_t bProtocolNum; 221 CCID_ProtocolDataStructure abProtocolDataStructure; 222 } CCID_Parameter; 223 224 typedef struct QEMU_PACKED CCID_DataBlock { 225 CCID_BULK_IN b; 226 uint8_t bChainParameter; 227 uint8_t abData[0]; 228 } CCID_DataBlock; 229 230 /* 6.1.4 PC_to_RDR_XfrBlock */ 231 typedef struct QEMU_PACKED CCID_XferBlock { 232 CCID_Header hdr; 233 uint8_t bBWI; /* Block Waiting Timeout */ 234 uint16_t wLevelParameter; /* XXX currently unused */ 235 uint8_t abData[0]; 236 } CCID_XferBlock; 237 238 typedef struct QEMU_PACKED CCID_IccPowerOn { 239 CCID_Header hdr; 240 uint8_t bPowerSelect; 241 uint16_t abRFU; 242 } CCID_IccPowerOn; 243 244 typedef struct QEMU_PACKED CCID_IccPowerOff { 245 CCID_Header hdr; 246 uint16_t abRFU; 247 } CCID_IccPowerOff; 248 249 typedef struct QEMU_PACKED CCID_SetParameters { 250 CCID_Header hdr; 251 uint8_t bProtocolNum; 252 uint16_t abRFU; 253 CCID_ProtocolDataStructure abProtocolDataStructure; 254 } CCID_SetParameters; 255 256 typedef struct CCID_Notify_Slot_Change { 257 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 258 uint8_t bmSlotICCState; 259 } CCID_Notify_Slot_Change; 260 261 /* used for DataBlock response to XferBlock */ 262 typedef struct Answer { 263 uint8_t slot; 264 uint8_t seq; 265 } Answer; 266 267 /* pending BULK_IN messages */ 268 typedef struct BulkIn { 269 uint8_t data[BULK_IN_BUF_SIZE]; 270 uint32_t len; 271 uint32_t pos; 272 } BulkIn; 273 274 typedef struct CCIDBus { 275 BusState qbus; 276 } CCIDBus; 277 278 /* 279 * powered - defaults to true, changed by PowerOn/PowerOff messages 280 */ 281 typedef struct USBCCIDState { 282 USBDevice dev; 283 USBEndpoint *intr; 284 USBEndpoint *bulk; 285 CCIDBus bus; 286 CCIDCardState *card; 287 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 288 uint32_t bulk_in_pending_start; 289 uint32_t bulk_in_pending_end; /* first free */ 290 uint32_t bulk_in_pending_num; 291 BulkIn *current_bulk_in; 292 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 293 uint32_t bulk_out_pos; 294 uint64_t last_answer_error; 295 Answer pending_answers[PENDING_ANSWERS_NUM]; 296 uint32_t pending_answers_start; 297 uint32_t pending_answers_end; 298 uint32_t pending_answers_num; 299 uint8_t bError; 300 uint8_t bmCommandStatus; 301 uint8_t bProtocolNum; 302 CCID_ProtocolDataStructure abProtocolDataStructure; 303 uint32_t ulProtocolDataStructureSize; 304 uint32_t state_vmstate; 305 uint8_t bmSlotICCState; 306 uint8_t powered; 307 uint8_t notify_slot_change; 308 uint8_t debug; 309 } USBCCIDState; 310 311 /* 312 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 313 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 314 * Specification. 315 * 316 * This device implemented based on the spec and with an Athena Smart Card 317 * Reader as reference: 318 * 0dc3:1004 Athena Smartcard Solutions, Inc. 319 */ 320 321 static const uint8_t qemu_ccid_descriptor[] = { 322 /* Smart Card Device Class Descriptor */ 323 0x36, /* u8 bLength; */ 324 0x21, /* u8 bDescriptorType; Functional */ 325 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 326 0x00, /* 327 * u8 bMaxSlotIndex; The index of the highest available 328 * slot on this device. All slots are consecutive starting 329 * at 00h. 330 */ 331 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 332 333 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 334 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 335 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 336 0xa0, 0x0f, 0x00, 0x00, 337 /* u32 dwMaximumClock; */ 338 0x00, 0x00, 0x01, 0x00, 339 0x00, /* u8 bNumClockSupported; * 340 * 0 means just the default and max. */ 341 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 342 0x80, 0x25, 0x00, 0x00, 343 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 344 0x00, 0xC2, 0x01, 0x00, 345 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 346 * default and max */ 347 /* u32 dwMaxIFSD; * 348 * maximum IFSD supported by CCID for protocol * 349 * T=1 (Maximum seen from various cards) */ 350 0xfe, 0x00, 0x00, 0x00, 351 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 352 0x00, 0x00, 0x00, 0x00, 353 /* u32 dwMechanical; 0 - no special characteristics. */ 354 0x00, 0x00, 0x00, 0x00, 355 /* 356 * u32 dwFeatures; 357 * 0 - No special characteristics 358 * + 2 Automatic parameter configuration based on ATR data 359 * + 4 Automatic activation of ICC on inserting 360 * + 8 Automatic ICC voltage selection 361 * + 10 Automatic ICC clock frequency change 362 * + 20 Automatic baud rate change 363 * + 40 Automatic parameters negotiation made by the CCID 364 * + 80 automatic PPS made by the CCID 365 * 100 CCID can set ICC in clock stop mode 366 * 200 NAD value other then 00 accepted (T=1 protocol) 367 * + 400 Automatic IFSD exchange as first exchange (T=1) 368 * One of the following only: 369 * + 10000 TPDU level exchanges with CCID 370 * 20000 Short APDU level exchange with CCID 371 * 40000 Short and Extended APDU level exchange with CCID 372 * 373 * 100000 USB Wake up signaling supported on card 374 * insertion and removal. Must set bit 5 in bmAttributes 375 * in Configuration descriptor if 100000 is set. 376 */ 377 0xfe, 0x04, 0x01, 0x00, 378 /* 379 * u32 dwMaxCCIDMessageLength; For extended APDU in 380 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 381 * wMaxPacketSize of the Bulk-OUT endpoint 382 */ 383 0x12, 0x00, 0x01, 0x00, 384 0xFF, /* 385 * u8 bClassGetResponse; Significant only for CCID that 386 * offers an APDU level for exchanges. Indicates the 387 * default class value used by the CCID when it sends a 388 * Get Response command to perform the transportation of 389 * an APDU by T=0 protocol 390 * FFh indicates that the CCID echos the class of the APDU. 391 */ 392 0xFF, /* 393 * u8 bClassEnvelope; EAPDU only. Envelope command for 394 * T=0 395 */ 396 0x00, 0x00, /* 397 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 398 * line for LCD display used for PIN entry. 0000 - no LCD 399 */ 400 0x01, /* 401 * u8 bPINSupport; 01h PIN Verification, 402 * 02h PIN Modification 403 */ 404 0x01, /* u8 bMaxCCIDBusySlots; */ 405 }; 406 407 enum { 408 STR_MANUFACTURER = 1, 409 STR_PRODUCT, 410 STR_SERIALNUMBER, 411 STR_INTERFACE, 412 }; 413 414 static const USBDescStrings desc_strings = { 415 [STR_MANUFACTURER] = "QEMU", 416 [STR_PRODUCT] = "QEMU USB CCID", 417 [STR_SERIALNUMBER] = "1", 418 [STR_INTERFACE] = "CCID Interface", 419 }; 420 421 static const USBDescIface desc_iface0 = { 422 .bInterfaceNumber = 0, 423 .bNumEndpoints = 3, 424 .bInterfaceClass = USB_CLASS_CSCID, 425 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 426 .bInterfaceProtocol = 0x00, 427 .iInterface = STR_INTERFACE, 428 .ndesc = 1, 429 .descs = (USBDescOther[]) { 430 { 431 /* smartcard descriptor */ 432 .data = qemu_ccid_descriptor, 433 }, 434 }, 435 .eps = (USBDescEndpoint[]) { 436 { 437 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 438 .bmAttributes = USB_ENDPOINT_XFER_INT, 439 .bInterval = 255, 440 .wMaxPacketSize = 64, 441 },{ 442 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 443 .bmAttributes = USB_ENDPOINT_XFER_BULK, 444 .wMaxPacketSize = 64, 445 },{ 446 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 447 .bmAttributes = USB_ENDPOINT_XFER_BULK, 448 .wMaxPacketSize = 64, 449 }, 450 } 451 }; 452 453 static const USBDescDevice desc_device = { 454 .bcdUSB = 0x0110, 455 .bMaxPacketSize0 = 64, 456 .bNumConfigurations = 1, 457 .confs = (USBDescConfig[]) { 458 { 459 .bNumInterfaces = 1, 460 .bConfigurationValue = 1, 461 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 462 USB_CFG_ATT_WAKEUP, 463 .bMaxPower = 50, 464 .nif = 1, 465 .ifs = &desc_iface0, 466 }, 467 }, 468 }; 469 470 static const USBDesc desc_ccid = { 471 .id = { 472 .idVendor = CCID_VENDOR_ID, 473 .idProduct = CCID_PRODUCT_ID, 474 .bcdDevice = CCID_DEVICE_VERSION, 475 .iManufacturer = STR_MANUFACTURER, 476 .iProduct = STR_PRODUCT, 477 .iSerialNumber = STR_SERIALNUMBER, 478 }, 479 .full = &desc_device, 480 .str = desc_strings, 481 }; 482 483 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 484 { 485 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 486 487 if (cc->get_atr) { 488 return cc->get_atr(card, len); 489 } 490 return NULL; 491 } 492 493 static void ccid_card_apdu_from_guest(CCIDCardState *card, 494 const uint8_t *apdu, 495 uint32_t len) 496 { 497 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 498 499 if (cc->apdu_from_guest) { 500 cc->apdu_from_guest(card, apdu, len); 501 } 502 } 503 504 static bool ccid_has_pending_answers(USBCCIDState *s) 505 { 506 return s->pending_answers_num > 0; 507 } 508 509 static void ccid_clear_pending_answers(USBCCIDState *s) 510 { 511 s->pending_answers_num = 0; 512 s->pending_answers_start = 0; 513 s->pending_answers_end = 0; 514 } 515 516 static void ccid_print_pending_answers(USBCCIDState *s) 517 { 518 Answer *answer; 519 int i, count; 520 521 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 522 if (!ccid_has_pending_answers(s)) { 523 DPRINTF(s, D_VERBOSE, " empty\n"); 524 return; 525 } 526 for (i = s->pending_answers_start, count = s->pending_answers_num ; 527 count > 0; count--, i++) { 528 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 529 if (count == 1) { 530 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 531 } else { 532 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 533 } 534 } 535 } 536 537 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 538 { 539 Answer *answer; 540 541 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 542 s->pending_answers_num++; 543 answer = 544 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 545 answer->slot = hdr->bSlot; 546 answer->seq = hdr->bSeq; 547 ccid_print_pending_answers(s); 548 } 549 550 static void ccid_remove_pending_answer(USBCCIDState *s, 551 uint8_t *slot, uint8_t *seq) 552 { 553 Answer *answer; 554 555 assert(s->pending_answers_num > 0); 556 s->pending_answers_num--; 557 answer = 558 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 559 *slot = answer->slot; 560 *seq = answer->seq; 561 ccid_print_pending_answers(s); 562 } 563 564 static void ccid_bulk_in_clear(USBCCIDState *s) 565 { 566 s->bulk_in_pending_start = 0; 567 s->bulk_in_pending_end = 0; 568 s->bulk_in_pending_num = 0; 569 } 570 571 static void ccid_bulk_in_release(USBCCIDState *s) 572 { 573 assert(s->current_bulk_in != NULL); 574 s->current_bulk_in->pos = 0; 575 s->current_bulk_in = NULL; 576 } 577 578 static void ccid_bulk_in_get(USBCCIDState *s) 579 { 580 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 581 return; 582 } 583 assert(s->bulk_in_pending_num > 0); 584 s->bulk_in_pending_num--; 585 s->current_bulk_in = 586 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 587 } 588 589 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 590 { 591 BulkIn *bulk_in; 592 593 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 594 595 /* look for an existing element */ 596 if (len > BULK_IN_BUF_SIZE) { 597 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 598 "discarding message.\n", 599 __func__, len, BULK_IN_BUF_SIZE); 600 return NULL; 601 } 602 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 603 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 604 "discarding message.\n", __func__); 605 return NULL; 606 } 607 bulk_in = 608 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 609 s->bulk_in_pending_num++; 610 bulk_in->len = len; 611 return bulk_in->data; 612 } 613 614 static void ccid_reset(USBCCIDState *s) 615 { 616 ccid_bulk_in_clear(s); 617 ccid_clear_pending_answers(s); 618 } 619 620 static void ccid_detach(USBCCIDState *s) 621 { 622 ccid_reset(s); 623 } 624 625 static void ccid_handle_reset(USBDevice *dev) 626 { 627 USBCCIDState *s = USB_CCID_DEV(dev); 628 629 DPRINTF(s, 1, "Reset\n"); 630 631 ccid_reset(s); 632 } 633 634 static const char *ccid_control_to_str(USBCCIDState *s, int request) 635 { 636 switch (request) { 637 /* generic - should be factored out if there are other debugees */ 638 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 639 return "(generic) set address"; 640 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 641 return "(generic) get descriptor"; 642 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 643 return "(generic) get configuration"; 644 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 645 return "(generic) set configuration"; 646 case DeviceRequest | USB_REQ_GET_STATUS: 647 return "(generic) get status"; 648 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 649 return "(generic) clear feature"; 650 case DeviceOutRequest | USB_REQ_SET_FEATURE: 651 return "(generic) set_feature"; 652 case InterfaceRequest | USB_REQ_GET_INTERFACE: 653 return "(generic) get interface"; 654 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 655 return "(generic) set interface"; 656 /* class requests */ 657 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 658 return "ABORT"; 659 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 660 return "GET_CLOCK_FREQUENCIES"; 661 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 662 return "GET_DATA_RATES"; 663 } 664 return "unknown"; 665 } 666 667 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 668 int value, int index, int length, uint8_t *data) 669 { 670 USBCCIDState *s = USB_CCID_DEV(dev); 671 int ret; 672 673 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 674 ccid_control_to_str(s, request), request, value); 675 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 676 if (ret >= 0) { 677 return; 678 } 679 680 switch (request) { 681 /* Class specific requests. */ 682 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 683 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 684 p->status = USB_RET_STALL; 685 break; 686 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 687 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 688 p->status = USB_RET_STALL; 689 break; 690 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 691 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 692 p->status = USB_RET_STALL; 693 break; 694 default: 695 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 696 request, value); 697 p->status = USB_RET_STALL; 698 break; 699 } 700 } 701 702 static bool ccid_card_inserted(USBCCIDState *s) 703 { 704 return s->bmSlotICCState & SLOT_0_STATE_MASK; 705 } 706 707 static uint8_t ccid_card_status(USBCCIDState *s) 708 { 709 return ccid_card_inserted(s) 710 ? (s->powered ? 711 ICC_STATUS_PRESENT_ACTIVE 712 : ICC_STATUS_PRESENT_INACTIVE 713 ) 714 : ICC_STATUS_NOT_PRESENT; 715 } 716 717 static uint8_t ccid_calc_status(USBCCIDState *s) 718 { 719 /* 720 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 721 * bmCommandStatus 722 */ 723 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 724 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 725 return ret; 726 } 727 728 static void ccid_reset_error_status(USBCCIDState *s) 729 { 730 s->bError = ERROR_CMD_NOT_SUPPORTED; 731 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 732 } 733 734 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 735 { 736 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 737 if (h == NULL) { 738 return; 739 } 740 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 741 h->b.hdr.dwLength = 0; 742 h->b.hdr.bSlot = recv->bSlot; 743 h->b.hdr.bSeq = recv->bSeq; 744 h->b.bStatus = ccid_calc_status(s); 745 h->b.bError = s->bError; 746 h->bClockStatus = CLOCK_STATUS_RUNNING; 747 ccid_reset_error_status(s); 748 usb_wakeup(s->bulk, 0); 749 } 750 751 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 752 { 753 CCID_Parameter *h; 754 uint32_t len = s->ulProtocolDataStructureSize; 755 756 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 757 if (h == NULL) { 758 return; 759 } 760 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 761 h->b.hdr.dwLength = 0; 762 h->b.hdr.bSlot = recv->bSlot; 763 h->b.hdr.bSeq = recv->bSeq; 764 h->b.bStatus = ccid_calc_status(s); 765 h->b.bError = s->bError; 766 h->bProtocolNum = s->bProtocolNum; 767 h->abProtocolDataStructure = s->abProtocolDataStructure; 768 ccid_reset_error_status(s); 769 usb_wakeup(s->bulk, 0); 770 } 771 772 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 773 const uint8_t *data, uint32_t len) 774 { 775 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 776 777 if (p == NULL) { 778 return; 779 } 780 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 781 p->b.hdr.dwLength = cpu_to_le32(len); 782 p->b.hdr.bSlot = slot; 783 p->b.hdr.bSeq = seq; 784 p->b.bStatus = ccid_calc_status(s); 785 p->b.bError = s->bError; 786 if (p->b.bError) { 787 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 788 } 789 if (len) { 790 assert(data); 791 memcpy(p->abData, data, len); 792 } 793 ccid_reset_error_status(s); 794 usb_wakeup(s->bulk, 0); 795 } 796 797 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 798 { 799 s->bmCommandStatus = COMMAND_STATUS_FAILED; 800 s->bError = error; 801 } 802 803 static void ccid_write_data_block_answer(USBCCIDState *s, 804 const uint8_t *data, uint32_t len) 805 { 806 uint8_t seq; 807 uint8_t slot; 808 809 if (!ccid_has_pending_answers(s)) { 810 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 811 ccid_report_error_failed(s, ERROR_ICC_MUTE); 812 return; 813 } 814 ccid_remove_pending_answer(s, &slot, &seq); 815 ccid_write_data_block(s, slot, seq, data, len); 816 } 817 818 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 819 { 820 int i; 821 822 if (len < 2 || !(atr[1] & 0x80)) { 823 /* too short or TD1 not included */ 824 return 0; /* T=0, default */ 825 } 826 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 827 i += !!(atr[1] & 0x80); 828 return atr[i] & 0x0f; 829 } 830 831 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 832 { 833 const uint8_t *atr = NULL; 834 uint32_t len = 0; 835 uint8_t atr_protocol_num; 836 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 837 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 838 839 if (s->card) { 840 atr = ccid_card_get_atr(s->card, &len); 841 } 842 atr_protocol_num = atr_get_protocol_num(atr, len); 843 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 844 atr_protocol_num); 845 /* set parameters from ATR - see spec page 109 */ 846 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 847 : s->bProtocolNum); 848 switch (atr_protocol_num) { 849 case 0: 850 /* TODO: unimplemented ATR T0 parameters */ 851 t0->bmFindexDindex = 0; 852 t0->bmTCCKST0 = 0; 853 t0->bGuardTimeT0 = 0; 854 t0->bWaitingIntegerT0 = 0; 855 t0->bClockStop = 0; 856 break; 857 case 1: 858 /* TODO: unimplemented ATR T1 parameters */ 859 t1->bmFindexDindex = 0; 860 t1->bmTCCKST1 = 0; 861 t1->bGuardTimeT1 = 0; 862 t1->bWaitingIntegerT1 = 0; 863 t1->bClockStop = 0; 864 t1->bIFSC = 0; 865 t1->bNadValue = 0; 866 break; 867 default: 868 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 869 __func__, atr_protocol_num); 870 } 871 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 872 } 873 874 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 875 { 876 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 877 uint32_t protocol_num = ph->bProtocolNum & 3; 878 879 if (protocol_num != 0 && protocol_num != 1) { 880 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 881 return; 882 } 883 s->bProtocolNum = protocol_num; 884 s->abProtocolDataStructure = ph->abProtocolDataStructure; 885 } 886 887 /* 888 * must be 5 bytes for T=0, 7 bytes for T=1 889 * See page 52 890 */ 891 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 892 .t1 = { 893 .bmFindexDindex = 0x77, 894 .bmTCCKST1 = 0x00, 895 .bGuardTimeT1 = 0x00, 896 .bWaitingIntegerT1 = 0x00, 897 .bClockStop = 0x00, 898 .bIFSC = 0xfe, 899 .bNadValue = 0x00, 900 } 901 }; 902 903 static void ccid_reset_parameters(USBCCIDState *s) 904 { 905 s->bProtocolNum = 0; /* T=0 */ 906 s->abProtocolDataStructure = defaultProtocolDataStructure; 907 } 908 909 /* NOTE: only a single slot is supported (SLOT_0) */ 910 static void ccid_on_slot_change(USBCCIDState *s, bool full) 911 { 912 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 913 uint8_t current = s->bmSlotICCState; 914 if (full) { 915 s->bmSlotICCState |= SLOT_0_STATE_MASK; 916 } else { 917 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 918 } 919 if (current != s->bmSlotICCState) { 920 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 921 } 922 s->notify_slot_change = true; 923 usb_wakeup(s->intr, 0); 924 } 925 926 static void ccid_write_data_block_error( 927 USBCCIDState *s, uint8_t slot, uint8_t seq) 928 { 929 ccid_write_data_block(s, slot, seq, NULL, 0); 930 } 931 932 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 933 { 934 uint32_t len; 935 936 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 937 DPRINTF(s, 1, 938 "usb-ccid: not sending apdu to client, no card connected\n"); 939 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 940 return; 941 } 942 len = le32_to_cpu(recv->hdr.dwLength); 943 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 944 recv->hdr.bSeq, len); 945 ccid_add_pending_answer(s, (CCID_Header *)recv); 946 if (s->card && len <= BULK_OUT_DATA_SIZE) { 947 ccid_card_apdu_from_guest(s->card, recv->abData, len); 948 } else { 949 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 950 } 951 } 952 953 static const char *ccid_message_type_to_str(uint8_t type) 954 { 955 switch (type) { 956 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 957 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 958 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 959 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 960 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 961 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 962 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 963 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 964 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 965 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 966 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 967 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 968 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 969 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 970 return "SetDataRateAndClockFrequency"; 971 } 972 return "unknown"; 973 } 974 975 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 976 { 977 CCID_Header *ccid_header; 978 979 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 980 goto err; 981 } 982 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 983 s->bulk_out_pos += p->iov.size; 984 if (s->bulk_out_pos < 10) { 985 DPRINTF(s, 1, "%s: header incomplete\n", __func__); 986 goto err; 987 } 988 989 ccid_header = (CCID_Header *)s->bulk_out_data; 990 if ((s->bulk_out_pos - 10 < ccid_header->dwLength) && 991 (p->iov.size == CCID_MAX_PACKET_SIZE)) { 992 DPRINTF(s, D_VERBOSE, 993 "usb-ccid: bulk_in: expecting more packets (%d/%d)\n", 994 s->bulk_out_pos - 10, ccid_header->dwLength); 995 return; 996 } 997 if (s->bulk_out_pos - 10 != ccid_header->dwLength) { 998 DPRINTF(s, 1, 999 "usb-ccid: bulk_in: message size mismatch (got %d, expected %d)\n", 1000 s->bulk_out_pos - 10, ccid_header->dwLength); 1001 goto err; 1002 } 1003 1004 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1005 ccid_header->bMessageType, 1006 ccid_message_type_to_str(ccid_header->bMessageType)); 1007 switch (ccid_header->bMessageType) { 1008 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1009 ccid_write_slot_status(s, ccid_header); 1010 break; 1011 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1012 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1013 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1014 s->powered = true; 1015 if (!ccid_card_inserted(s)) { 1016 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1017 } 1018 /* atr is written regardless of error. */ 1019 ccid_write_data_block_atr(s, ccid_header); 1020 break; 1021 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1022 ccid_reset_error_status(s); 1023 s->powered = false; 1024 ccid_write_slot_status(s, ccid_header); 1025 break; 1026 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1027 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1028 break; 1029 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1030 ccid_reset_error_status(s); 1031 ccid_set_parameters(s, ccid_header); 1032 ccid_write_parameters(s, ccid_header); 1033 break; 1034 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1035 ccid_reset_error_status(s); 1036 ccid_reset_parameters(s); 1037 ccid_write_parameters(s, ccid_header); 1038 break; 1039 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1040 ccid_reset_error_status(s); 1041 ccid_write_parameters(s, ccid_header); 1042 break; 1043 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1044 ccid_report_error_failed(s, 0); 1045 ccid_write_slot_status(s, ccid_header); 1046 break; 1047 default: 1048 DPRINTF(s, 1, 1049 "handle_data: ERROR: unhandled message type %Xh\n", 1050 ccid_header->bMessageType); 1051 /* 1052 * The caller is expecting the device to respond, tell it we 1053 * don't support the operation. 1054 */ 1055 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1056 ccid_write_slot_status(s, ccid_header); 1057 break; 1058 } 1059 s->bulk_out_pos = 0; 1060 return; 1061 1062 err: 1063 p->status = USB_RET_STALL; 1064 s->bulk_out_pos = 0; 1065 return; 1066 } 1067 1068 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p, 1069 unsigned int max_packet_size) 1070 { 1071 int len = 0; 1072 1073 ccid_bulk_in_get(s); 1074 if (s->current_bulk_in != NULL) { 1075 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1076 p->iov.size); 1077 if (len) { 1078 usb_packet_copy(p, s->current_bulk_in->data + 1079 s->current_bulk_in->pos, len); 1080 } 1081 s->current_bulk_in->pos += len; 1082 if (s->current_bulk_in->pos == s->current_bulk_in->len 1083 && len != max_packet_size) { 1084 ccid_bulk_in_release(s); 1085 } 1086 } else { 1087 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1088 p->status = USB_RET_NAK; 1089 } 1090 if (len) { 1091 DPRINTF(s, D_MORE_INFO, 1092 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1093 __func__, p->iov.size, len); 1094 } 1095 if (len < p->iov.size) { 1096 DPRINTF(s, 1, 1097 "%s: returning short (EREMOTEIO) %d < %zd\n", 1098 __func__, len, p->iov.size); 1099 } 1100 } 1101 1102 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1103 { 1104 USBCCIDState *s = USB_CCID_DEV(dev); 1105 uint8_t buf[2]; 1106 1107 switch (p->pid) { 1108 case USB_TOKEN_OUT: 1109 ccid_handle_bulk_out(s, p); 1110 break; 1111 1112 case USB_TOKEN_IN: 1113 switch (p->ep->nr) { 1114 case CCID_BULK_IN_EP: 1115 ccid_bulk_in_copy_to_guest(s, p, dev->ep_ctl.max_packet_size); 1116 break; 1117 case CCID_INT_IN_EP: 1118 if (s->notify_slot_change) { 1119 /* page 56, RDR_to_PC_NotifySlotChange */ 1120 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1121 buf[1] = s->bmSlotICCState; 1122 usb_packet_copy(p, buf, 2); 1123 s->notify_slot_change = false; 1124 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1125 DPRINTF(s, D_INFO, 1126 "handle_data: int_in: notify_slot_change %X, " 1127 "requested len %zd\n", 1128 s->bmSlotICCState, p->iov.size); 1129 } else { 1130 p->status = USB_RET_NAK; 1131 } 1132 break; 1133 default: 1134 DPRINTF(s, 1, "Bad endpoint\n"); 1135 p->status = USB_RET_STALL; 1136 break; 1137 } 1138 break; 1139 default: 1140 DPRINTF(s, 1, "Bad token\n"); 1141 p->status = USB_RET_STALL; 1142 break; 1143 } 1144 } 1145 1146 static void ccid_unrealize(USBDevice *dev, Error **errp) 1147 { 1148 USBCCIDState *s = USB_CCID_DEV(dev); 1149 1150 ccid_bulk_in_clear(s); 1151 } 1152 1153 static void ccid_flush_pending_answers(USBCCIDState *s) 1154 { 1155 while (ccid_has_pending_answers(s)) { 1156 ccid_write_data_block_answer(s, NULL, 0); 1157 } 1158 } 1159 1160 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1161 { 1162 return s->pending_answers_num == 0 1163 ? NULL 1164 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1165 } 1166 1167 static Property ccid_props[] = { 1168 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1169 DEFINE_PROP_END_OF_LIST(), 1170 }; 1171 1172 #define TYPE_CCID_BUS "ccid-bus" 1173 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1174 1175 static const TypeInfo ccid_bus_info = { 1176 .name = TYPE_CCID_BUS, 1177 .parent = TYPE_BUS, 1178 .instance_size = sizeof(CCIDBus), 1179 }; 1180 1181 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1182 uint8_t *apdu, uint32_t len) 1183 { 1184 DeviceState *qdev = DEVICE(card); 1185 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1186 USBCCIDState *s = USB_CCID_DEV(dev); 1187 Answer *answer; 1188 1189 if (!ccid_has_pending_answers(s)) { 1190 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1191 return; 1192 } 1193 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1194 answer = ccid_peek_next_answer(s); 1195 if (answer == NULL) { 1196 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1197 ccid_report_error_failed(s, ERROR_HW_ERROR); 1198 return; 1199 } 1200 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1201 len, answer->seq, answer->slot); 1202 ccid_write_data_block_answer(s, apdu, len); 1203 } 1204 1205 void ccid_card_card_removed(CCIDCardState *card) 1206 { 1207 DeviceState *qdev = DEVICE(card); 1208 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1209 USBCCIDState *s = USB_CCID_DEV(dev); 1210 1211 ccid_on_slot_change(s, false); 1212 ccid_flush_pending_answers(s); 1213 ccid_reset(s); 1214 } 1215 1216 int ccid_card_ccid_attach(CCIDCardState *card) 1217 { 1218 DeviceState *qdev = DEVICE(card); 1219 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1220 USBCCIDState *s = USB_CCID_DEV(dev); 1221 1222 DPRINTF(s, 1, "CCID Attach\n"); 1223 return 0; 1224 } 1225 1226 void ccid_card_ccid_detach(CCIDCardState *card) 1227 { 1228 DeviceState *qdev = DEVICE(card); 1229 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1230 USBCCIDState *s = USB_CCID_DEV(dev); 1231 1232 DPRINTF(s, 1, "CCID Detach\n"); 1233 if (ccid_card_inserted(s)) { 1234 ccid_on_slot_change(s, false); 1235 } 1236 ccid_detach(s); 1237 } 1238 1239 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1240 { 1241 DeviceState *qdev = DEVICE(card); 1242 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1243 USBCCIDState *s = USB_CCID_DEV(dev); 1244 1245 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1246 s->last_answer_error = error; 1247 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1248 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1249 /* 1250 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1251 * so check that first to not trigger abort 1252 */ 1253 if (ccid_has_pending_answers(s)) { 1254 ccid_write_data_block_answer(s, NULL, 0); 1255 } 1256 } 1257 1258 void ccid_card_card_inserted(CCIDCardState *card) 1259 { 1260 DeviceState *qdev = DEVICE(card); 1261 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1262 USBCCIDState *s = USB_CCID_DEV(dev); 1263 1264 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1265 ccid_flush_pending_answers(s); 1266 ccid_on_slot_change(s, true); 1267 } 1268 1269 static void ccid_card_unrealize(DeviceState *qdev, Error **errp) 1270 { 1271 CCIDCardState *card = CCID_CARD(qdev); 1272 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1273 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1274 USBCCIDState *s = USB_CCID_DEV(dev); 1275 Error *local_err = NULL; 1276 1277 if (ccid_card_inserted(s)) { 1278 ccid_card_card_removed(card); 1279 } 1280 if (cc->unrealize) { 1281 cc->unrealize(card, &local_err); 1282 if (local_err != NULL) { 1283 error_propagate(errp, local_err); 1284 return; 1285 } 1286 } 1287 s->card = NULL; 1288 } 1289 1290 static void ccid_card_realize(DeviceState *qdev, Error **errp) 1291 { 1292 CCIDCardState *card = CCID_CARD(qdev); 1293 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1294 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1295 USBCCIDState *s = USB_CCID_DEV(dev); 1296 Error *local_err = NULL; 1297 1298 if (card->slot != 0) { 1299 error_setg(errp, "usb-ccid supports one slot, can't add %d", 1300 card->slot); 1301 return; 1302 } 1303 if (s->card != NULL) { 1304 error_setg(errp, "usb-ccid card already full, not adding"); 1305 return; 1306 } 1307 if (cc->realize) { 1308 cc->realize(card, &local_err); 1309 if (local_err != NULL) { 1310 error_propagate(errp, local_err); 1311 return; 1312 } 1313 } 1314 s->card = card; 1315 } 1316 1317 static void ccid_realize(USBDevice *dev, Error **errp) 1318 { 1319 USBCCIDState *s = USB_CCID_DEV(dev); 1320 1321 usb_desc_create_serial(dev); 1322 usb_desc_init(dev); 1323 qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), 1324 NULL); 1325 qbus_set_hotplug_handler(BUS(&s->bus), DEVICE(dev), &error_abort); 1326 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1327 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1328 s->card = NULL; 1329 s->dev.speed = USB_SPEED_FULL; 1330 s->dev.speedmask = USB_SPEED_MASK_FULL; 1331 s->notify_slot_change = false; 1332 s->powered = true; 1333 s->pending_answers_num = 0; 1334 s->last_answer_error = 0; 1335 s->bulk_in_pending_start = 0; 1336 s->bulk_in_pending_end = 0; 1337 s->current_bulk_in = NULL; 1338 ccid_reset_error_status(s); 1339 s->bulk_out_pos = 0; 1340 ccid_reset_parameters(s); 1341 ccid_reset(s); 1342 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1343 } 1344 1345 static int ccid_post_load(void *opaque, int version_id) 1346 { 1347 USBCCIDState *s = opaque; 1348 1349 /* 1350 * This must be done after usb_device_attach, which sets state to ATTACHED, 1351 * while it must be DEFAULT in order to accept packets (like it is after 1352 * reset, but reset will reset our addr and call our reset handler which 1353 * may change state, and we don't want to do that when migrating). 1354 */ 1355 s->dev.state = s->state_vmstate; 1356 return 0; 1357 } 1358 1359 static int ccid_pre_save(void *opaque) 1360 { 1361 USBCCIDState *s = opaque; 1362 1363 s->state_vmstate = s->dev.state; 1364 1365 return 0; 1366 } 1367 1368 static VMStateDescription bulk_in_vmstate = { 1369 .name = "CCID BulkIn state", 1370 .version_id = 1, 1371 .minimum_version_id = 1, 1372 .fields = (VMStateField[]) { 1373 VMSTATE_BUFFER(data, BulkIn), 1374 VMSTATE_UINT32(len, BulkIn), 1375 VMSTATE_UINT32(pos, BulkIn), 1376 VMSTATE_END_OF_LIST() 1377 } 1378 }; 1379 1380 static VMStateDescription answer_vmstate = { 1381 .name = "CCID Answer state", 1382 .version_id = 1, 1383 .minimum_version_id = 1, 1384 .fields = (VMStateField[]) { 1385 VMSTATE_UINT8(slot, Answer), 1386 VMSTATE_UINT8(seq, Answer), 1387 VMSTATE_END_OF_LIST() 1388 } 1389 }; 1390 1391 static VMStateDescription usb_device_vmstate = { 1392 .name = "usb_device", 1393 .version_id = 1, 1394 .minimum_version_id = 1, 1395 .fields = (VMStateField[]) { 1396 VMSTATE_UINT8(addr, USBDevice), 1397 VMSTATE_BUFFER(setup_buf, USBDevice), 1398 VMSTATE_BUFFER(data_buf, USBDevice), 1399 VMSTATE_END_OF_LIST() 1400 } 1401 }; 1402 1403 static VMStateDescription ccid_vmstate = { 1404 .name = "usb-ccid", 1405 .version_id = 1, 1406 .minimum_version_id = 1, 1407 .post_load = ccid_post_load, 1408 .pre_save = ccid_pre_save, 1409 .fields = (VMStateField[]) { 1410 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1411 VMSTATE_UINT8(debug, USBCCIDState), 1412 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1413 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1414 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1415 VMSTATE_UINT8(powered, USBCCIDState), 1416 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1417 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1418 VMSTATE_UINT8(bError, USBCCIDState), 1419 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1420 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1421 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1422 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1423 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1424 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1425 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1426 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1427 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1428 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1429 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1430 VMSTATE_UNUSED(1), /* was migration_state */ 1431 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1432 VMSTATE_END_OF_LIST() 1433 } 1434 }; 1435 1436 static Property ccid_properties[] = { 1437 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1438 DEFINE_PROP_END_OF_LIST(), 1439 }; 1440 1441 static void ccid_class_initfn(ObjectClass *klass, void *data) 1442 { 1443 DeviceClass *dc = DEVICE_CLASS(klass); 1444 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1445 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1446 1447 uc->realize = ccid_realize; 1448 uc->product_desc = "QEMU USB CCID"; 1449 uc->usb_desc = &desc_ccid; 1450 uc->handle_reset = ccid_handle_reset; 1451 uc->handle_control = ccid_handle_control; 1452 uc->handle_data = ccid_handle_data; 1453 uc->unrealize = ccid_unrealize; 1454 dc->desc = "CCID Rev 1.1 smartcard reader"; 1455 dc->vmsd = &ccid_vmstate; 1456 dc->props = ccid_properties; 1457 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1458 hc->unplug = qdev_simple_device_unplug_cb; 1459 } 1460 1461 static const TypeInfo ccid_info = { 1462 .name = CCID_DEV_NAME, 1463 .parent = TYPE_USB_DEVICE, 1464 .instance_size = sizeof(USBCCIDState), 1465 .class_init = ccid_class_initfn, 1466 .interfaces = (InterfaceInfo[]) { 1467 { TYPE_HOTPLUG_HANDLER }, 1468 { } 1469 } 1470 }; 1471 1472 static void ccid_card_class_init(ObjectClass *klass, void *data) 1473 { 1474 DeviceClass *k = DEVICE_CLASS(klass); 1475 k->bus_type = TYPE_CCID_BUS; 1476 k->realize = ccid_card_realize; 1477 k->unrealize = ccid_card_unrealize; 1478 k->props = ccid_props; 1479 } 1480 1481 static const TypeInfo ccid_card_type_info = { 1482 .name = TYPE_CCID_CARD, 1483 .parent = TYPE_DEVICE, 1484 .instance_size = sizeof(CCIDCardState), 1485 .abstract = true, 1486 .class_size = sizeof(CCIDCardClass), 1487 .class_init = ccid_card_class_init, 1488 }; 1489 1490 static void ccid_register_types(void) 1491 { 1492 type_register_static(&ccid_bus_info); 1493 type_register_static(&ccid_card_type_info); 1494 type_register_static(&ccid_info); 1495 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1496 } 1497 1498 type_init(ccid_register_types) 1499