1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qemu/units.h" 39 #include "qapi/error.h" 40 #include "qemu-common.h" 41 #include "qemu/error-report.h" 42 #include "qemu/module.h" 43 #include "hw/qdev-properties.h" 44 #include "hw/usb.h" 45 #include "migration/vmstate.h" 46 #include "desc.h" 47 48 #include "ccid.h" 49 50 #define DPRINTF(s, lvl, fmt, ...) \ 51 do { \ 52 if (lvl <= s->debug) { \ 53 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 54 } \ 55 } while (0) 56 57 #define D_WARN 1 58 #define D_INFO 2 59 #define D_MORE_INFO 3 60 #define D_VERBOSE 4 61 62 #define CCID_DEV_NAME "usb-ccid" 63 #define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME) 64 /* 65 * The two options for variable sized buffers: 66 * make them constant size, for large enough constant, 67 * or handle the migration complexity - VMState doesn't handle this case. 68 * sizes are expected never to be exceeded, unless guest misbehaves. 69 */ 70 #define BULK_OUT_DATA_SIZE (64 * KiB) 71 #define PENDING_ANSWERS_NUM 128 72 73 #define BULK_IN_BUF_SIZE 384 74 #define BULK_IN_PENDING_NUM 8 75 76 #define CCID_MAX_PACKET_SIZE 64 77 78 #define CCID_CONTROL_ABORT 0x1 79 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 80 #define CCID_CONTROL_GET_DATA_RATES 0x3 81 82 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 83 #define CCID_VENDOR_DESCRIPTION "QEMU" 84 #define CCID_INTERFACE_NAME "CCID Interface" 85 #define CCID_SERIAL_NUMBER_STRING "1" 86 /* 87 * Using Gemplus Vendor and Product id 88 * Effect on various drivers: 89 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 90 * linux has a number of class drivers, but openct filters based on 91 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 92 */ 93 #define CCID_VENDOR_ID 0x08e6 94 #define CCID_PRODUCT_ID 0x4433 95 #define CCID_DEVICE_VERSION 0x0000 96 97 /* 98 * BULK_OUT messages from PC to Reader 99 * Defined in CCID Rev 1.1 6.1 (page 26) 100 */ 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 111 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 112 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 113 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 114 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 115 116 /* 117 * BULK_IN messages from Reader to PC 118 * Defined in CCID Rev 1.1 6.2 (page 48) 119 */ 120 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 121 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 122 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 123 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 124 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 125 126 /* 127 * INTERRUPT_IN messages from Reader to PC 128 * Defined in CCID Rev 1.1 6.3 (page 56) 129 */ 130 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 131 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 132 133 /* 134 * Endpoints for CCID - addresses are up to us to decide. 135 * To support slot insertion and removal we must have an interrupt in ep 136 * in addition we need a bulk in and bulk out ep 137 * 5.2, page 20 138 */ 139 #define CCID_INT_IN_EP 1 140 #define CCID_BULK_IN_EP 2 141 #define CCID_BULK_OUT_EP 3 142 143 /* bmSlotICCState masks */ 144 #define SLOT_0_STATE_MASK 1 145 #define SLOT_0_CHANGED_MASK 2 146 147 /* Status codes that go in bStatus (see 6.2.6) */ 148 enum { 149 ICC_STATUS_PRESENT_ACTIVE = 0, 150 ICC_STATUS_PRESENT_INACTIVE, 151 ICC_STATUS_NOT_PRESENT 152 }; 153 154 enum { 155 COMMAND_STATUS_NO_ERROR = 0, 156 COMMAND_STATUS_FAILED, 157 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 158 }; 159 160 /* Error codes that go in bError (see 6.2.6) */ 161 enum { 162 ERROR_CMD_NOT_SUPPORTED = 0, 163 ERROR_CMD_ABORTED = -1, 164 ERROR_ICC_MUTE = -2, 165 ERROR_XFR_PARITY_ERROR = -3, 166 ERROR_XFR_OVERRUN = -4, 167 ERROR_HW_ERROR = -5, 168 }; 169 170 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 171 enum { 172 CLOCK_STATUS_RUNNING = 0, 173 /* 174 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 175 * 3 - unknown state. rest are RFU 176 */ 177 }; 178 179 typedef struct QEMU_PACKED CCID_Header { 180 uint8_t bMessageType; 181 uint32_t dwLength; 182 uint8_t bSlot; 183 uint8_t bSeq; 184 } CCID_Header; 185 186 typedef struct QEMU_PACKED CCID_BULK_IN { 187 CCID_Header hdr; 188 uint8_t bStatus; /* Only used in BULK_IN */ 189 uint8_t bError; /* Only used in BULK_IN */ 190 } CCID_BULK_IN; 191 192 typedef struct QEMU_PACKED CCID_SlotStatus { 193 CCID_BULK_IN b; 194 uint8_t bClockStatus; 195 } CCID_SlotStatus; 196 197 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 198 uint8_t bmFindexDindex; 199 uint8_t bmTCCKST0; 200 uint8_t bGuardTimeT0; 201 uint8_t bWaitingIntegerT0; 202 uint8_t bClockStop; 203 } CCID_T0ProtocolDataStructure; 204 205 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 206 uint8_t bmFindexDindex; 207 uint8_t bmTCCKST1; 208 uint8_t bGuardTimeT1; 209 uint8_t bWaitingIntegerT1; 210 uint8_t bClockStop; 211 uint8_t bIFSC; 212 uint8_t bNadValue; 213 } CCID_T1ProtocolDataStructure; 214 215 typedef union CCID_ProtocolDataStructure { 216 CCID_T0ProtocolDataStructure t0; 217 CCID_T1ProtocolDataStructure t1; 218 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 219 } CCID_ProtocolDataStructure; 220 221 typedef struct QEMU_PACKED CCID_Parameter { 222 CCID_BULK_IN b; 223 uint8_t bProtocolNum; 224 CCID_ProtocolDataStructure abProtocolDataStructure; 225 } CCID_Parameter; 226 227 typedef struct QEMU_PACKED CCID_DataBlock { 228 CCID_BULK_IN b; 229 uint8_t bChainParameter; 230 uint8_t abData[]; 231 } CCID_DataBlock; 232 233 /* 6.1.4 PC_to_RDR_XfrBlock */ 234 typedef struct QEMU_PACKED CCID_XferBlock { 235 CCID_Header hdr; 236 uint8_t bBWI; /* Block Waiting Timeout */ 237 uint16_t wLevelParameter; /* XXX currently unused */ 238 uint8_t abData[]; 239 } CCID_XferBlock; 240 241 typedef struct QEMU_PACKED CCID_IccPowerOn { 242 CCID_Header hdr; 243 uint8_t bPowerSelect; 244 uint16_t abRFU; 245 } CCID_IccPowerOn; 246 247 typedef struct QEMU_PACKED CCID_IccPowerOff { 248 CCID_Header hdr; 249 uint16_t abRFU; 250 } CCID_IccPowerOff; 251 252 typedef struct QEMU_PACKED CCID_SetParameters { 253 CCID_Header hdr; 254 uint8_t bProtocolNum; 255 uint16_t abRFU; 256 CCID_ProtocolDataStructure abProtocolDataStructure; 257 } CCID_SetParameters; 258 259 typedef struct CCID_Notify_Slot_Change { 260 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 261 uint8_t bmSlotICCState; 262 } CCID_Notify_Slot_Change; 263 264 /* used for DataBlock response to XferBlock */ 265 typedef struct Answer { 266 uint8_t slot; 267 uint8_t seq; 268 } Answer; 269 270 /* pending BULK_IN messages */ 271 typedef struct BulkIn { 272 uint8_t data[BULK_IN_BUF_SIZE]; 273 uint32_t len; 274 uint32_t pos; 275 } BulkIn; 276 277 typedef struct CCIDBus { 278 BusState qbus; 279 } CCIDBus; 280 281 /* 282 * powered - defaults to true, changed by PowerOn/PowerOff messages 283 */ 284 typedef struct USBCCIDState { 285 USBDevice dev; 286 USBEndpoint *intr; 287 USBEndpoint *bulk; 288 CCIDBus bus; 289 CCIDCardState *card; 290 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 291 uint32_t bulk_in_pending_start; 292 uint32_t bulk_in_pending_end; /* first free */ 293 uint32_t bulk_in_pending_num; 294 BulkIn *current_bulk_in; 295 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 296 uint32_t bulk_out_pos; 297 uint64_t last_answer_error; 298 Answer pending_answers[PENDING_ANSWERS_NUM]; 299 uint32_t pending_answers_start; 300 uint32_t pending_answers_end; 301 uint32_t pending_answers_num; 302 uint8_t bError; 303 uint8_t bmCommandStatus; 304 uint8_t bProtocolNum; 305 CCID_ProtocolDataStructure abProtocolDataStructure; 306 uint32_t ulProtocolDataStructureSize; 307 uint32_t state_vmstate; 308 uint8_t bmSlotICCState; 309 uint8_t powered; 310 uint8_t notify_slot_change; 311 uint8_t debug; 312 } USBCCIDState; 313 314 /* 315 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 316 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 317 * Specification. 318 * 319 * This device implemented based on the spec and with an Athena Smart Card 320 * Reader as reference: 321 * 0dc3:1004 Athena Smartcard Solutions, Inc. 322 */ 323 324 static const uint8_t qemu_ccid_descriptor[] = { 325 /* Smart Card Device Class Descriptor */ 326 0x36, /* u8 bLength; */ 327 0x21, /* u8 bDescriptorType; Functional */ 328 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 329 0x00, /* 330 * u8 bMaxSlotIndex; The index of the highest available 331 * slot on this device. All slots are consecutive starting 332 * at 00h. 333 */ 334 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 335 336 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 337 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 338 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 339 0xa0, 0x0f, 0x00, 0x00, 340 /* u32 dwMaximumClock; */ 341 0x00, 0x00, 0x01, 0x00, 342 0x00, /* u8 bNumClockSupported; * 343 * 0 means just the default and max. */ 344 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 345 0x80, 0x25, 0x00, 0x00, 346 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 347 0x00, 0xC2, 0x01, 0x00, 348 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 349 * default and max */ 350 /* u32 dwMaxIFSD; * 351 * maximum IFSD supported by CCID for protocol * 352 * T=1 (Maximum seen from various cards) */ 353 0xfe, 0x00, 0x00, 0x00, 354 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 355 0x00, 0x00, 0x00, 0x00, 356 /* u32 dwMechanical; 0 - no special characteristics. */ 357 0x00, 0x00, 0x00, 0x00, 358 /* 359 * u32 dwFeatures; 360 * 0 - No special characteristics 361 * + 2 Automatic parameter configuration based on ATR data 362 * + 4 Automatic activation of ICC on inserting 363 * + 8 Automatic ICC voltage selection 364 * + 10 Automatic ICC clock frequency change 365 * + 20 Automatic baud rate change 366 * + 40 Automatic parameters negotiation made by the CCID 367 * + 80 automatic PPS made by the CCID 368 * 100 CCID can set ICC in clock stop mode 369 * 200 NAD value other then 00 accepted (T=1 protocol) 370 * + 400 Automatic IFSD exchange as first exchange (T=1) 371 * One of the following only: 372 * + 10000 TPDU level exchanges with CCID 373 * 20000 Short APDU level exchange with CCID 374 * 40000 Short and Extended APDU level exchange with CCID 375 * 376 * 100000 USB Wake up signaling supported on card 377 * insertion and removal. Must set bit 5 in bmAttributes 378 * in Configuration descriptor if 100000 is set. 379 */ 380 0xfe, 0x04, 0x01, 0x00, 381 /* 382 * u32 dwMaxCCIDMessageLength; For extended APDU in 383 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 384 * wMaxPacketSize of the Bulk-OUT endpoint 385 */ 386 0x12, 0x00, 0x01, 0x00, 387 0xFF, /* 388 * u8 bClassGetResponse; Significant only for CCID that 389 * offers an APDU level for exchanges. Indicates the 390 * default class value used by the CCID when it sends a 391 * Get Response command to perform the transportation of 392 * an APDU by T=0 protocol 393 * FFh indicates that the CCID echos the class of the APDU. 394 */ 395 0xFF, /* 396 * u8 bClassEnvelope; EAPDU only. Envelope command for 397 * T=0 398 */ 399 0x00, 0x00, /* 400 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 401 * line for LCD display used for PIN entry. 0000 - no LCD 402 */ 403 0x01, /* 404 * u8 bPINSupport; 01h PIN Verification, 405 * 02h PIN Modification 406 */ 407 0x01, /* u8 bMaxCCIDBusySlots; */ 408 }; 409 410 enum { 411 STR_MANUFACTURER = 1, 412 STR_PRODUCT, 413 STR_SERIALNUMBER, 414 STR_INTERFACE, 415 }; 416 417 static const USBDescStrings desc_strings = { 418 [STR_MANUFACTURER] = "QEMU", 419 [STR_PRODUCT] = "QEMU USB CCID", 420 [STR_SERIALNUMBER] = "1", 421 [STR_INTERFACE] = "CCID Interface", 422 }; 423 424 static const USBDescIface desc_iface0 = { 425 .bInterfaceNumber = 0, 426 .bNumEndpoints = 3, 427 .bInterfaceClass = USB_CLASS_CSCID, 428 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 429 .bInterfaceProtocol = 0x00, 430 .iInterface = STR_INTERFACE, 431 .ndesc = 1, 432 .descs = (USBDescOther[]) { 433 { 434 /* smartcard descriptor */ 435 .data = qemu_ccid_descriptor, 436 }, 437 }, 438 .eps = (USBDescEndpoint[]) { 439 { 440 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 441 .bmAttributes = USB_ENDPOINT_XFER_INT, 442 .bInterval = 255, 443 .wMaxPacketSize = 64, 444 },{ 445 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 446 .bmAttributes = USB_ENDPOINT_XFER_BULK, 447 .wMaxPacketSize = 64, 448 },{ 449 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 450 .bmAttributes = USB_ENDPOINT_XFER_BULK, 451 .wMaxPacketSize = 64, 452 }, 453 } 454 }; 455 456 static const USBDescDevice desc_device = { 457 .bcdUSB = 0x0110, 458 .bMaxPacketSize0 = 64, 459 .bNumConfigurations = 1, 460 .confs = (USBDescConfig[]) { 461 { 462 .bNumInterfaces = 1, 463 .bConfigurationValue = 1, 464 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 465 USB_CFG_ATT_WAKEUP, 466 .bMaxPower = 50, 467 .nif = 1, 468 .ifs = &desc_iface0, 469 }, 470 }, 471 }; 472 473 static const USBDesc desc_ccid = { 474 .id = { 475 .idVendor = CCID_VENDOR_ID, 476 .idProduct = CCID_PRODUCT_ID, 477 .bcdDevice = CCID_DEVICE_VERSION, 478 .iManufacturer = STR_MANUFACTURER, 479 .iProduct = STR_PRODUCT, 480 .iSerialNumber = STR_SERIALNUMBER, 481 }, 482 .full = &desc_device, 483 .str = desc_strings, 484 }; 485 486 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 487 { 488 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 489 490 if (cc->get_atr) { 491 return cc->get_atr(card, len); 492 } 493 return NULL; 494 } 495 496 static void ccid_card_apdu_from_guest(CCIDCardState *card, 497 const uint8_t *apdu, 498 uint32_t len) 499 { 500 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 501 502 if (cc->apdu_from_guest) { 503 cc->apdu_from_guest(card, apdu, len); 504 } 505 } 506 507 static bool ccid_has_pending_answers(USBCCIDState *s) 508 { 509 return s->pending_answers_num > 0; 510 } 511 512 static void ccid_clear_pending_answers(USBCCIDState *s) 513 { 514 s->pending_answers_num = 0; 515 s->pending_answers_start = 0; 516 s->pending_answers_end = 0; 517 } 518 519 static void ccid_print_pending_answers(USBCCIDState *s) 520 { 521 Answer *answer; 522 int i, count; 523 524 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 525 if (!ccid_has_pending_answers(s)) { 526 DPRINTF(s, D_VERBOSE, " empty\n"); 527 return; 528 } 529 for (i = s->pending_answers_start, count = s->pending_answers_num ; 530 count > 0; count--, i++) { 531 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 532 if (count == 1) { 533 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 534 } else { 535 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 536 } 537 } 538 } 539 540 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 541 { 542 Answer *answer; 543 544 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 545 s->pending_answers_num++; 546 answer = 547 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 548 answer->slot = hdr->bSlot; 549 answer->seq = hdr->bSeq; 550 ccid_print_pending_answers(s); 551 } 552 553 static void ccid_remove_pending_answer(USBCCIDState *s, 554 uint8_t *slot, uint8_t *seq) 555 { 556 Answer *answer; 557 558 assert(s->pending_answers_num > 0); 559 s->pending_answers_num--; 560 answer = 561 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 562 *slot = answer->slot; 563 *seq = answer->seq; 564 ccid_print_pending_answers(s); 565 } 566 567 static void ccid_bulk_in_clear(USBCCIDState *s) 568 { 569 s->bulk_in_pending_start = 0; 570 s->bulk_in_pending_end = 0; 571 s->bulk_in_pending_num = 0; 572 } 573 574 static void ccid_bulk_in_release(USBCCIDState *s) 575 { 576 assert(s->current_bulk_in != NULL); 577 s->current_bulk_in->pos = 0; 578 s->current_bulk_in = NULL; 579 } 580 581 static void ccid_bulk_in_get(USBCCIDState *s) 582 { 583 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 584 return; 585 } 586 assert(s->bulk_in_pending_num > 0); 587 s->bulk_in_pending_num--; 588 s->current_bulk_in = 589 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 590 } 591 592 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 593 { 594 BulkIn *bulk_in; 595 596 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 597 598 /* look for an existing element */ 599 if (len > BULK_IN_BUF_SIZE) { 600 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 601 "discarding message.\n", 602 __func__, len, BULK_IN_BUF_SIZE); 603 return NULL; 604 } 605 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 606 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 607 "discarding message.\n", __func__); 608 return NULL; 609 } 610 bulk_in = 611 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 612 s->bulk_in_pending_num++; 613 bulk_in->len = len; 614 return bulk_in->data; 615 } 616 617 static void ccid_reset(USBCCIDState *s) 618 { 619 ccid_bulk_in_clear(s); 620 ccid_clear_pending_answers(s); 621 } 622 623 static void ccid_detach(USBCCIDState *s) 624 { 625 ccid_reset(s); 626 } 627 628 static void ccid_handle_reset(USBDevice *dev) 629 { 630 USBCCIDState *s = USB_CCID_DEV(dev); 631 632 DPRINTF(s, 1, "Reset\n"); 633 634 ccid_reset(s); 635 } 636 637 static const char *ccid_control_to_str(USBCCIDState *s, int request) 638 { 639 switch (request) { 640 /* generic - should be factored out if there are other debugees */ 641 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 642 return "(generic) set address"; 643 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 644 return "(generic) get descriptor"; 645 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 646 return "(generic) get configuration"; 647 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 648 return "(generic) set configuration"; 649 case DeviceRequest | USB_REQ_GET_STATUS: 650 return "(generic) get status"; 651 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 652 return "(generic) clear feature"; 653 case DeviceOutRequest | USB_REQ_SET_FEATURE: 654 return "(generic) set_feature"; 655 case InterfaceRequest | USB_REQ_GET_INTERFACE: 656 return "(generic) get interface"; 657 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 658 return "(generic) set interface"; 659 /* class requests */ 660 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 661 return "ABORT"; 662 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 663 return "GET_CLOCK_FREQUENCIES"; 664 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 665 return "GET_DATA_RATES"; 666 } 667 return "unknown"; 668 } 669 670 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 671 int value, int index, int length, uint8_t *data) 672 { 673 USBCCIDState *s = USB_CCID_DEV(dev); 674 int ret; 675 676 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 677 ccid_control_to_str(s, request), request, value); 678 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 679 if (ret >= 0) { 680 return; 681 } 682 683 switch (request) { 684 /* Class specific requests. */ 685 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 686 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 687 p->status = USB_RET_STALL; 688 break; 689 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 690 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 691 p->status = USB_RET_STALL; 692 break; 693 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 694 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 695 p->status = USB_RET_STALL; 696 break; 697 default: 698 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 699 request, value); 700 p->status = USB_RET_STALL; 701 break; 702 } 703 } 704 705 static bool ccid_card_inserted(USBCCIDState *s) 706 { 707 return s->bmSlotICCState & SLOT_0_STATE_MASK; 708 } 709 710 static uint8_t ccid_card_status(USBCCIDState *s) 711 { 712 return ccid_card_inserted(s) 713 ? (s->powered ? 714 ICC_STATUS_PRESENT_ACTIVE 715 : ICC_STATUS_PRESENT_INACTIVE 716 ) 717 : ICC_STATUS_NOT_PRESENT; 718 } 719 720 static uint8_t ccid_calc_status(USBCCIDState *s) 721 { 722 /* 723 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 724 * bmCommandStatus 725 */ 726 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 727 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 728 return ret; 729 } 730 731 static void ccid_reset_error_status(USBCCIDState *s) 732 { 733 s->bError = ERROR_CMD_NOT_SUPPORTED; 734 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 735 } 736 737 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 738 { 739 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 740 if (h == NULL) { 741 return; 742 } 743 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 744 h->b.hdr.dwLength = 0; 745 h->b.hdr.bSlot = recv->bSlot; 746 h->b.hdr.bSeq = recv->bSeq; 747 h->b.bStatus = ccid_calc_status(s); 748 h->b.bError = s->bError; 749 h->bClockStatus = CLOCK_STATUS_RUNNING; 750 ccid_reset_error_status(s); 751 usb_wakeup(s->bulk, 0); 752 } 753 754 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 755 { 756 CCID_Parameter *h; 757 uint32_t len = s->ulProtocolDataStructureSize; 758 759 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 760 if (h == NULL) { 761 return; 762 } 763 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 764 h->b.hdr.dwLength = 0; 765 h->b.hdr.bSlot = recv->bSlot; 766 h->b.hdr.bSeq = recv->bSeq; 767 h->b.bStatus = ccid_calc_status(s); 768 h->b.bError = s->bError; 769 h->bProtocolNum = s->bProtocolNum; 770 h->abProtocolDataStructure = s->abProtocolDataStructure; 771 ccid_reset_error_status(s); 772 usb_wakeup(s->bulk, 0); 773 } 774 775 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 776 const uint8_t *data, uint32_t len) 777 { 778 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 779 780 if (p == NULL) { 781 return; 782 } 783 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 784 p->b.hdr.dwLength = cpu_to_le32(len); 785 p->b.hdr.bSlot = slot; 786 p->b.hdr.bSeq = seq; 787 p->b.bStatus = ccid_calc_status(s); 788 p->b.bError = s->bError; 789 if (p->b.bError) { 790 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 791 } 792 if (len) { 793 assert(data); 794 memcpy(p->abData, data, len); 795 } 796 ccid_reset_error_status(s); 797 usb_wakeup(s->bulk, 0); 798 } 799 800 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 801 { 802 s->bmCommandStatus = COMMAND_STATUS_FAILED; 803 s->bError = error; 804 } 805 806 static void ccid_write_data_block_answer(USBCCIDState *s, 807 const uint8_t *data, uint32_t len) 808 { 809 uint8_t seq; 810 uint8_t slot; 811 812 if (!ccid_has_pending_answers(s)) { 813 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 814 ccid_report_error_failed(s, ERROR_ICC_MUTE); 815 return; 816 } 817 ccid_remove_pending_answer(s, &slot, &seq); 818 ccid_write_data_block(s, slot, seq, data, len); 819 } 820 821 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 822 { 823 int i; 824 825 if (len < 2 || !(atr[1] & 0x80)) { 826 /* too short or TD1 not included */ 827 return 0; /* T=0, default */ 828 } 829 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 830 i += !!(atr[1] & 0x80); 831 return atr[i] & 0x0f; 832 } 833 834 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 835 { 836 const uint8_t *atr = NULL; 837 uint32_t len = 0; 838 uint8_t atr_protocol_num; 839 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 840 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 841 842 if (s->card) { 843 atr = ccid_card_get_atr(s->card, &len); 844 } 845 atr_protocol_num = atr_get_protocol_num(atr, len); 846 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 847 atr_protocol_num); 848 /* set parameters from ATR - see spec page 109 */ 849 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 850 : s->bProtocolNum); 851 switch (atr_protocol_num) { 852 case 0: 853 /* TODO: unimplemented ATR T0 parameters */ 854 t0->bmFindexDindex = 0; 855 t0->bmTCCKST0 = 0; 856 t0->bGuardTimeT0 = 0; 857 t0->bWaitingIntegerT0 = 0; 858 t0->bClockStop = 0; 859 break; 860 case 1: 861 /* TODO: unimplemented ATR T1 parameters */ 862 t1->bmFindexDindex = 0; 863 t1->bmTCCKST1 = 0; 864 t1->bGuardTimeT1 = 0; 865 t1->bWaitingIntegerT1 = 0; 866 t1->bClockStop = 0; 867 t1->bIFSC = 0; 868 t1->bNadValue = 0; 869 break; 870 default: 871 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 872 __func__, atr_protocol_num); 873 } 874 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 875 } 876 877 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 878 { 879 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 880 uint32_t protocol_num = ph->bProtocolNum & 3; 881 882 if (protocol_num != 0 && protocol_num != 1) { 883 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 884 return; 885 } 886 s->bProtocolNum = protocol_num; 887 s->abProtocolDataStructure = ph->abProtocolDataStructure; 888 } 889 890 /* 891 * must be 5 bytes for T=0, 7 bytes for T=1 892 * See page 52 893 */ 894 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 895 .t1 = { 896 .bmFindexDindex = 0x77, 897 .bmTCCKST1 = 0x00, 898 .bGuardTimeT1 = 0x00, 899 .bWaitingIntegerT1 = 0x00, 900 .bClockStop = 0x00, 901 .bIFSC = 0xfe, 902 .bNadValue = 0x00, 903 } 904 }; 905 906 static void ccid_reset_parameters(USBCCIDState *s) 907 { 908 s->bProtocolNum = 0; /* T=0 */ 909 s->abProtocolDataStructure = defaultProtocolDataStructure; 910 } 911 912 /* NOTE: only a single slot is supported (SLOT_0) */ 913 static void ccid_on_slot_change(USBCCIDState *s, bool full) 914 { 915 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 916 uint8_t current = s->bmSlotICCState; 917 if (full) { 918 s->bmSlotICCState |= SLOT_0_STATE_MASK; 919 } else { 920 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 921 } 922 if (current != s->bmSlotICCState) { 923 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 924 } 925 s->notify_slot_change = true; 926 usb_wakeup(s->intr, 0); 927 } 928 929 static void ccid_write_data_block_error( 930 USBCCIDState *s, uint8_t slot, uint8_t seq) 931 { 932 ccid_write_data_block(s, slot, seq, NULL, 0); 933 } 934 935 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 936 { 937 uint32_t len; 938 939 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 940 DPRINTF(s, 1, 941 "usb-ccid: not sending apdu to client, no card connected\n"); 942 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 943 return; 944 } 945 len = le32_to_cpu(recv->hdr.dwLength); 946 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 947 recv->hdr.bSeq, len); 948 ccid_add_pending_answer(s, (CCID_Header *)recv); 949 if (s->card && len <= BULK_OUT_DATA_SIZE) { 950 ccid_card_apdu_from_guest(s->card, recv->abData, len); 951 } else { 952 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 953 } 954 } 955 956 static const char *ccid_message_type_to_str(uint8_t type) 957 { 958 switch (type) { 959 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 960 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 961 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 962 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 963 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 964 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 965 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 966 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 967 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 968 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 969 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 970 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 971 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 972 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 973 return "SetDataRateAndClockFrequency"; 974 } 975 return "unknown"; 976 } 977 978 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 979 { 980 CCID_Header *ccid_header; 981 982 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 983 goto err; 984 } 985 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 986 s->bulk_out_pos += p->iov.size; 987 if (s->bulk_out_pos < 10) { 988 DPRINTF(s, 1, "%s: header incomplete\n", __func__); 989 goto err; 990 } 991 992 ccid_header = (CCID_Header *)s->bulk_out_data; 993 if ((s->bulk_out_pos - 10 < ccid_header->dwLength) && 994 (p->iov.size == CCID_MAX_PACKET_SIZE)) { 995 DPRINTF(s, D_VERBOSE, 996 "usb-ccid: bulk_in: expecting more packets (%d/%d)\n", 997 s->bulk_out_pos - 10, ccid_header->dwLength); 998 return; 999 } 1000 if (s->bulk_out_pos - 10 != ccid_header->dwLength) { 1001 DPRINTF(s, 1, 1002 "usb-ccid: bulk_in: message size mismatch (got %d, expected %d)\n", 1003 s->bulk_out_pos - 10, ccid_header->dwLength); 1004 goto err; 1005 } 1006 1007 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1008 ccid_header->bMessageType, 1009 ccid_message_type_to_str(ccid_header->bMessageType)); 1010 switch (ccid_header->bMessageType) { 1011 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1012 ccid_write_slot_status(s, ccid_header); 1013 break; 1014 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1015 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1016 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1017 s->powered = true; 1018 if (!ccid_card_inserted(s)) { 1019 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1020 } 1021 /* atr is written regardless of error. */ 1022 ccid_write_data_block_atr(s, ccid_header); 1023 break; 1024 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1025 ccid_reset_error_status(s); 1026 s->powered = false; 1027 ccid_write_slot_status(s, ccid_header); 1028 break; 1029 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1030 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1031 break; 1032 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1033 ccid_reset_error_status(s); 1034 ccid_set_parameters(s, ccid_header); 1035 ccid_write_parameters(s, ccid_header); 1036 break; 1037 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1038 ccid_reset_error_status(s); 1039 ccid_reset_parameters(s); 1040 ccid_write_parameters(s, ccid_header); 1041 break; 1042 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1043 ccid_reset_error_status(s); 1044 ccid_write_parameters(s, ccid_header); 1045 break; 1046 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1047 ccid_report_error_failed(s, 0); 1048 ccid_write_slot_status(s, ccid_header); 1049 break; 1050 default: 1051 DPRINTF(s, 1, 1052 "handle_data: ERROR: unhandled message type %Xh\n", 1053 ccid_header->bMessageType); 1054 /* 1055 * The caller is expecting the device to respond, tell it we 1056 * don't support the operation. 1057 */ 1058 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1059 ccid_write_slot_status(s, ccid_header); 1060 break; 1061 } 1062 s->bulk_out_pos = 0; 1063 return; 1064 1065 err: 1066 p->status = USB_RET_STALL; 1067 s->bulk_out_pos = 0; 1068 return; 1069 } 1070 1071 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p, 1072 unsigned int max_packet_size) 1073 { 1074 int len = 0; 1075 1076 ccid_bulk_in_get(s); 1077 if (s->current_bulk_in != NULL) { 1078 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1079 p->iov.size); 1080 if (len) { 1081 usb_packet_copy(p, s->current_bulk_in->data + 1082 s->current_bulk_in->pos, len); 1083 } 1084 s->current_bulk_in->pos += len; 1085 if (s->current_bulk_in->pos == s->current_bulk_in->len 1086 && len != max_packet_size) { 1087 ccid_bulk_in_release(s); 1088 } 1089 } else { 1090 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1091 p->status = USB_RET_NAK; 1092 } 1093 if (len) { 1094 DPRINTF(s, D_MORE_INFO, 1095 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1096 __func__, p->iov.size, len); 1097 } 1098 if (len < p->iov.size) { 1099 DPRINTF(s, 1, 1100 "%s: returning short (EREMOTEIO) %d < %zd\n", 1101 __func__, len, p->iov.size); 1102 } 1103 } 1104 1105 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1106 { 1107 USBCCIDState *s = USB_CCID_DEV(dev); 1108 uint8_t buf[2]; 1109 1110 switch (p->pid) { 1111 case USB_TOKEN_OUT: 1112 ccid_handle_bulk_out(s, p); 1113 break; 1114 1115 case USB_TOKEN_IN: 1116 switch (p->ep->nr) { 1117 case CCID_BULK_IN_EP: 1118 ccid_bulk_in_copy_to_guest(s, p, dev->ep_ctl.max_packet_size); 1119 break; 1120 case CCID_INT_IN_EP: 1121 if (s->notify_slot_change) { 1122 /* page 56, RDR_to_PC_NotifySlotChange */ 1123 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1124 buf[1] = s->bmSlotICCState; 1125 usb_packet_copy(p, buf, 2); 1126 s->notify_slot_change = false; 1127 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1128 DPRINTF(s, D_INFO, 1129 "handle_data: int_in: notify_slot_change %X, " 1130 "requested len %zd\n", 1131 s->bmSlotICCState, p->iov.size); 1132 } else { 1133 p->status = USB_RET_NAK; 1134 } 1135 break; 1136 default: 1137 DPRINTF(s, 1, "Bad endpoint\n"); 1138 p->status = USB_RET_STALL; 1139 break; 1140 } 1141 break; 1142 default: 1143 DPRINTF(s, 1, "Bad token\n"); 1144 p->status = USB_RET_STALL; 1145 break; 1146 } 1147 } 1148 1149 static void ccid_unrealize(USBDevice *dev) 1150 { 1151 USBCCIDState *s = USB_CCID_DEV(dev); 1152 1153 ccid_bulk_in_clear(s); 1154 } 1155 1156 static void ccid_flush_pending_answers(USBCCIDState *s) 1157 { 1158 while (ccid_has_pending_answers(s)) { 1159 ccid_write_data_block_answer(s, NULL, 0); 1160 } 1161 } 1162 1163 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1164 { 1165 return s->pending_answers_num == 0 1166 ? NULL 1167 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1168 } 1169 1170 static Property ccid_props[] = { 1171 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1172 DEFINE_PROP_END_OF_LIST(), 1173 }; 1174 1175 #define TYPE_CCID_BUS "ccid-bus" 1176 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1177 1178 static const TypeInfo ccid_bus_info = { 1179 .name = TYPE_CCID_BUS, 1180 .parent = TYPE_BUS, 1181 .instance_size = sizeof(CCIDBus), 1182 }; 1183 1184 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1185 uint8_t *apdu, uint32_t len) 1186 { 1187 DeviceState *qdev = DEVICE(card); 1188 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1189 USBCCIDState *s = USB_CCID_DEV(dev); 1190 Answer *answer; 1191 1192 if (!ccid_has_pending_answers(s)) { 1193 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1194 return; 1195 } 1196 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1197 answer = ccid_peek_next_answer(s); 1198 if (answer == NULL) { 1199 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1200 ccid_report_error_failed(s, ERROR_HW_ERROR); 1201 return; 1202 } 1203 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1204 len, answer->seq, answer->slot); 1205 ccid_write_data_block_answer(s, apdu, len); 1206 } 1207 1208 void ccid_card_card_removed(CCIDCardState *card) 1209 { 1210 DeviceState *qdev = DEVICE(card); 1211 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1212 USBCCIDState *s = USB_CCID_DEV(dev); 1213 1214 ccid_on_slot_change(s, false); 1215 ccid_flush_pending_answers(s); 1216 ccid_reset(s); 1217 } 1218 1219 int ccid_card_ccid_attach(CCIDCardState *card) 1220 { 1221 DeviceState *qdev = DEVICE(card); 1222 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1223 USBCCIDState *s = USB_CCID_DEV(dev); 1224 1225 DPRINTF(s, 1, "CCID Attach\n"); 1226 return 0; 1227 } 1228 1229 void ccid_card_ccid_detach(CCIDCardState *card) 1230 { 1231 DeviceState *qdev = DEVICE(card); 1232 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1233 USBCCIDState *s = USB_CCID_DEV(dev); 1234 1235 DPRINTF(s, 1, "CCID Detach\n"); 1236 if (ccid_card_inserted(s)) { 1237 ccid_on_slot_change(s, false); 1238 } 1239 ccid_detach(s); 1240 } 1241 1242 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1243 { 1244 DeviceState *qdev = DEVICE(card); 1245 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1246 USBCCIDState *s = USB_CCID_DEV(dev); 1247 1248 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1249 s->last_answer_error = error; 1250 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1251 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1252 /* 1253 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1254 * so check that first to not trigger abort 1255 */ 1256 if (ccid_has_pending_answers(s)) { 1257 ccid_write_data_block_answer(s, NULL, 0); 1258 } 1259 } 1260 1261 void ccid_card_card_inserted(CCIDCardState *card) 1262 { 1263 DeviceState *qdev = DEVICE(card); 1264 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1265 USBCCIDState *s = USB_CCID_DEV(dev); 1266 1267 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1268 ccid_flush_pending_answers(s); 1269 ccid_on_slot_change(s, true); 1270 } 1271 1272 static void ccid_card_unrealize(DeviceState *qdev) 1273 { 1274 CCIDCardState *card = CCID_CARD(qdev); 1275 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1276 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1277 USBCCIDState *s = USB_CCID_DEV(dev); 1278 1279 if (ccid_card_inserted(s)) { 1280 ccid_card_card_removed(card); 1281 } 1282 if (cc->unrealize) { 1283 cc->unrealize(card); 1284 } 1285 s->card = NULL; 1286 } 1287 1288 static void ccid_card_realize(DeviceState *qdev, Error **errp) 1289 { 1290 CCIDCardState *card = CCID_CARD(qdev); 1291 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1292 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1293 USBCCIDState *s = USB_CCID_DEV(dev); 1294 Error *local_err = NULL; 1295 1296 if (card->slot != 0) { 1297 error_setg(errp, "usb-ccid supports one slot, can't add %d", 1298 card->slot); 1299 return; 1300 } 1301 if (s->card != NULL) { 1302 error_setg(errp, "usb-ccid card already full, not adding"); 1303 return; 1304 } 1305 if (cc->realize) { 1306 cc->realize(card, &local_err); 1307 if (local_err != NULL) { 1308 error_propagate(errp, local_err); 1309 return; 1310 } 1311 } 1312 s->card = card; 1313 } 1314 1315 static void ccid_realize(USBDevice *dev, Error **errp) 1316 { 1317 USBCCIDState *s = USB_CCID_DEV(dev); 1318 1319 usb_desc_create_serial(dev); 1320 usb_desc_init(dev); 1321 qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), 1322 NULL); 1323 qbus_set_hotplug_handler(BUS(&s->bus), OBJECT(dev)); 1324 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1325 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1326 s->card = NULL; 1327 s->dev.speed = USB_SPEED_FULL; 1328 s->dev.speedmask = USB_SPEED_MASK_FULL; 1329 s->notify_slot_change = false; 1330 s->powered = true; 1331 s->pending_answers_num = 0; 1332 s->last_answer_error = 0; 1333 s->bulk_in_pending_start = 0; 1334 s->bulk_in_pending_end = 0; 1335 s->current_bulk_in = NULL; 1336 ccid_reset_error_status(s); 1337 s->bulk_out_pos = 0; 1338 ccid_reset_parameters(s); 1339 ccid_reset(s); 1340 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1341 } 1342 1343 static int ccid_post_load(void *opaque, int version_id) 1344 { 1345 USBCCIDState *s = opaque; 1346 1347 /* 1348 * This must be done after usb_device_attach, which sets state to ATTACHED, 1349 * while it must be DEFAULT in order to accept packets (like it is after 1350 * reset, but reset will reset our addr and call our reset handler which 1351 * may change state, and we don't want to do that when migrating). 1352 */ 1353 s->dev.state = s->state_vmstate; 1354 return 0; 1355 } 1356 1357 static int ccid_pre_save(void *opaque) 1358 { 1359 USBCCIDState *s = opaque; 1360 1361 s->state_vmstate = s->dev.state; 1362 1363 return 0; 1364 } 1365 1366 static VMStateDescription bulk_in_vmstate = { 1367 .name = "CCID BulkIn state", 1368 .version_id = 1, 1369 .minimum_version_id = 1, 1370 .fields = (VMStateField[]) { 1371 VMSTATE_BUFFER(data, BulkIn), 1372 VMSTATE_UINT32(len, BulkIn), 1373 VMSTATE_UINT32(pos, BulkIn), 1374 VMSTATE_END_OF_LIST() 1375 } 1376 }; 1377 1378 static VMStateDescription answer_vmstate = { 1379 .name = "CCID Answer state", 1380 .version_id = 1, 1381 .minimum_version_id = 1, 1382 .fields = (VMStateField[]) { 1383 VMSTATE_UINT8(slot, Answer), 1384 VMSTATE_UINT8(seq, Answer), 1385 VMSTATE_END_OF_LIST() 1386 } 1387 }; 1388 1389 static VMStateDescription usb_device_vmstate = { 1390 .name = "usb_device", 1391 .version_id = 1, 1392 .minimum_version_id = 1, 1393 .fields = (VMStateField[]) { 1394 VMSTATE_UINT8(addr, USBDevice), 1395 VMSTATE_BUFFER(setup_buf, USBDevice), 1396 VMSTATE_BUFFER(data_buf, USBDevice), 1397 VMSTATE_END_OF_LIST() 1398 } 1399 }; 1400 1401 static VMStateDescription ccid_vmstate = { 1402 .name = "usb-ccid", 1403 .version_id = 1, 1404 .minimum_version_id = 1, 1405 .post_load = ccid_post_load, 1406 .pre_save = ccid_pre_save, 1407 .fields = (VMStateField[]) { 1408 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1409 VMSTATE_UINT8(debug, USBCCIDState), 1410 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1411 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1412 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1413 VMSTATE_UINT8(powered, USBCCIDState), 1414 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1415 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1416 VMSTATE_UINT8(bError, USBCCIDState), 1417 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1418 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1419 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1420 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1421 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1422 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1423 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1424 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1425 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1426 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1427 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1428 VMSTATE_UNUSED(1), /* was migration_state */ 1429 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1430 VMSTATE_END_OF_LIST() 1431 } 1432 }; 1433 1434 static Property ccid_properties[] = { 1435 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1436 DEFINE_PROP_END_OF_LIST(), 1437 }; 1438 1439 static void ccid_class_initfn(ObjectClass *klass, void *data) 1440 { 1441 DeviceClass *dc = DEVICE_CLASS(klass); 1442 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1443 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1444 1445 uc->realize = ccid_realize; 1446 uc->product_desc = "QEMU USB CCID"; 1447 uc->usb_desc = &desc_ccid; 1448 uc->handle_reset = ccid_handle_reset; 1449 uc->handle_control = ccid_handle_control; 1450 uc->handle_data = ccid_handle_data; 1451 uc->unrealize = ccid_unrealize; 1452 dc->desc = "CCID Rev 1.1 smartcard reader"; 1453 dc->vmsd = &ccid_vmstate; 1454 device_class_set_props(dc, ccid_properties); 1455 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1456 hc->unplug = qdev_simple_device_unplug_cb; 1457 } 1458 1459 static const TypeInfo ccid_info = { 1460 .name = CCID_DEV_NAME, 1461 .parent = TYPE_USB_DEVICE, 1462 .instance_size = sizeof(USBCCIDState), 1463 .class_init = ccid_class_initfn, 1464 .interfaces = (InterfaceInfo[]) { 1465 { TYPE_HOTPLUG_HANDLER }, 1466 { } 1467 } 1468 }; 1469 1470 static void ccid_card_class_init(ObjectClass *klass, void *data) 1471 { 1472 DeviceClass *k = DEVICE_CLASS(klass); 1473 k->bus_type = TYPE_CCID_BUS; 1474 k->realize = ccid_card_realize; 1475 k->unrealize = ccid_card_unrealize; 1476 device_class_set_props(k, ccid_props); 1477 } 1478 1479 static const TypeInfo ccid_card_type_info = { 1480 .name = TYPE_CCID_CARD, 1481 .parent = TYPE_DEVICE, 1482 .instance_size = sizeof(CCIDCardState), 1483 .abstract = true, 1484 .class_size = sizeof(CCIDCardClass), 1485 .class_init = ccid_card_class_init, 1486 }; 1487 1488 static void ccid_register_types(void) 1489 { 1490 type_register_static(&ccid_bus_info); 1491 type_register_static(&ccid_card_type_info); 1492 type_register_static(&ccid_info); 1493 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1494 } 1495 1496 type_init(ccid_register_types) 1497