1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qapi/error.h" 39 #include "qemu-common.h" 40 #include "qemu/error-report.h" 41 #include "hw/usb.h" 42 #include "hw/usb/desc.h" 43 44 #include "ccid.h" 45 46 #define DPRINTF(s, lvl, fmt, ...) \ 47 do { \ 48 if (lvl <= s->debug) { \ 49 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 50 } \ 51 } while (0) 52 53 #define D_WARN 1 54 #define D_INFO 2 55 #define D_MORE_INFO 3 56 #define D_VERBOSE 4 57 58 #define CCID_DEV_NAME "usb-ccid" 59 #define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME) 60 /* 61 * The two options for variable sized buffers: 62 * make them constant size, for large enough constant, 63 * or handle the migration complexity - VMState doesn't handle this case. 64 * sizes are expected never to be exceeded, unless guest misbehaves. 65 */ 66 #define BULK_OUT_DATA_SIZE 65536 67 #define PENDING_ANSWERS_NUM 128 68 69 #define BULK_IN_BUF_SIZE 384 70 #define BULK_IN_PENDING_NUM 8 71 72 #define CCID_MAX_PACKET_SIZE 64 73 74 #define CCID_CONTROL_ABORT 0x1 75 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 76 #define CCID_CONTROL_GET_DATA_RATES 0x3 77 78 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 79 #define CCID_VENDOR_DESCRIPTION "QEMU" 80 #define CCID_INTERFACE_NAME "CCID Interface" 81 #define CCID_SERIAL_NUMBER_STRING "1" 82 /* 83 * Using Gemplus Vendor and Product id 84 * Effect on various drivers: 85 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 86 * linux has a number of class drivers, but openct filters based on 87 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 88 */ 89 #define CCID_VENDOR_ID 0x08e6 90 #define CCID_PRODUCT_ID 0x4433 91 #define CCID_DEVICE_VERSION 0x0000 92 93 /* 94 * BULK_OUT messages from PC to Reader 95 * Defined in CCID Rev 1.1 6.1 (page 26) 96 */ 97 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 98 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 99 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 100 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 111 112 /* 113 * BULK_IN messages from Reader to PC 114 * Defined in CCID Rev 1.1 6.2 (page 48) 115 */ 116 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 117 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 118 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 119 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 120 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 121 122 /* 123 * INTERRUPT_IN messages from Reader to PC 124 * Defined in CCID Rev 1.1 6.3 (page 56) 125 */ 126 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 127 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 128 129 /* 130 * Endpoints for CCID - addresses are up to us to decide. 131 * To support slot insertion and removal we must have an interrupt in ep 132 * in addition we need a bulk in and bulk out ep 133 * 5.2, page 20 134 */ 135 #define CCID_INT_IN_EP 1 136 #define CCID_BULK_IN_EP 2 137 #define CCID_BULK_OUT_EP 3 138 139 /* bmSlotICCState masks */ 140 #define SLOT_0_STATE_MASK 1 141 #define SLOT_0_CHANGED_MASK 2 142 143 /* Status codes that go in bStatus (see 6.2.6) */ 144 enum { 145 ICC_STATUS_PRESENT_ACTIVE = 0, 146 ICC_STATUS_PRESENT_INACTIVE, 147 ICC_STATUS_NOT_PRESENT 148 }; 149 150 enum { 151 COMMAND_STATUS_NO_ERROR = 0, 152 COMMAND_STATUS_FAILED, 153 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 154 }; 155 156 /* Error codes that go in bError (see 6.2.6) */ 157 enum { 158 ERROR_CMD_NOT_SUPPORTED = 0, 159 ERROR_CMD_ABORTED = -1, 160 ERROR_ICC_MUTE = -2, 161 ERROR_XFR_PARITY_ERROR = -3, 162 ERROR_XFR_OVERRUN = -4, 163 ERROR_HW_ERROR = -5, 164 }; 165 166 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 167 enum { 168 CLOCK_STATUS_RUNNING = 0, 169 /* 170 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 171 * 3 - unknown state. rest are RFU 172 */ 173 }; 174 175 typedef struct QEMU_PACKED CCID_Header { 176 uint8_t bMessageType; 177 uint32_t dwLength; 178 uint8_t bSlot; 179 uint8_t bSeq; 180 } CCID_Header; 181 182 typedef struct QEMU_PACKED CCID_BULK_IN { 183 CCID_Header hdr; 184 uint8_t bStatus; /* Only used in BULK_IN */ 185 uint8_t bError; /* Only used in BULK_IN */ 186 } CCID_BULK_IN; 187 188 typedef struct QEMU_PACKED CCID_SlotStatus { 189 CCID_BULK_IN b; 190 uint8_t bClockStatus; 191 } CCID_SlotStatus; 192 193 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 194 uint8_t bmFindexDindex; 195 uint8_t bmTCCKST0; 196 uint8_t bGuardTimeT0; 197 uint8_t bWaitingIntegerT0; 198 uint8_t bClockStop; 199 } CCID_T0ProtocolDataStructure; 200 201 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 202 uint8_t bmFindexDindex; 203 uint8_t bmTCCKST1; 204 uint8_t bGuardTimeT1; 205 uint8_t bWaitingIntegerT1; 206 uint8_t bClockStop; 207 uint8_t bIFSC; 208 uint8_t bNadValue; 209 } CCID_T1ProtocolDataStructure; 210 211 typedef union CCID_ProtocolDataStructure { 212 CCID_T0ProtocolDataStructure t0; 213 CCID_T1ProtocolDataStructure t1; 214 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 215 } CCID_ProtocolDataStructure; 216 217 typedef struct QEMU_PACKED CCID_Parameter { 218 CCID_BULK_IN b; 219 uint8_t bProtocolNum; 220 CCID_ProtocolDataStructure abProtocolDataStructure; 221 } CCID_Parameter; 222 223 typedef struct QEMU_PACKED CCID_DataBlock { 224 CCID_BULK_IN b; 225 uint8_t bChainParameter; 226 uint8_t abData[0]; 227 } CCID_DataBlock; 228 229 /* 6.1.4 PC_to_RDR_XfrBlock */ 230 typedef struct QEMU_PACKED CCID_XferBlock { 231 CCID_Header hdr; 232 uint8_t bBWI; /* Block Waiting Timeout */ 233 uint16_t wLevelParameter; /* XXX currently unused */ 234 uint8_t abData[0]; 235 } CCID_XferBlock; 236 237 typedef struct QEMU_PACKED CCID_IccPowerOn { 238 CCID_Header hdr; 239 uint8_t bPowerSelect; 240 uint16_t abRFU; 241 } CCID_IccPowerOn; 242 243 typedef struct QEMU_PACKED CCID_IccPowerOff { 244 CCID_Header hdr; 245 uint16_t abRFU; 246 } CCID_IccPowerOff; 247 248 typedef struct QEMU_PACKED CCID_SetParameters { 249 CCID_Header hdr; 250 uint8_t bProtocolNum; 251 uint16_t abRFU; 252 CCID_ProtocolDataStructure abProtocolDataStructure; 253 } CCID_SetParameters; 254 255 typedef struct CCID_Notify_Slot_Change { 256 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 257 uint8_t bmSlotICCState; 258 } CCID_Notify_Slot_Change; 259 260 /* used for DataBlock response to XferBlock */ 261 typedef struct Answer { 262 uint8_t slot; 263 uint8_t seq; 264 } Answer; 265 266 /* pending BULK_IN messages */ 267 typedef struct BulkIn { 268 uint8_t data[BULK_IN_BUF_SIZE]; 269 uint32_t len; 270 uint32_t pos; 271 } BulkIn; 272 273 enum { 274 MIGRATION_NONE, 275 MIGRATION_MIGRATED, 276 }; 277 278 typedef struct CCIDBus { 279 BusState qbus; 280 } CCIDBus; 281 282 /* 283 * powered - defaults to true, changed by PowerOn/PowerOff messages 284 */ 285 typedef struct USBCCIDState { 286 USBDevice dev; 287 USBEndpoint *intr; 288 USBEndpoint *bulk; 289 CCIDBus bus; 290 CCIDCardState *card; 291 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 292 uint32_t bulk_in_pending_start; 293 uint32_t bulk_in_pending_end; /* first free */ 294 uint32_t bulk_in_pending_num; 295 BulkIn *current_bulk_in; 296 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 297 uint32_t bulk_out_pos; 298 uint64_t last_answer_error; 299 Answer pending_answers[PENDING_ANSWERS_NUM]; 300 uint32_t pending_answers_start; 301 uint32_t pending_answers_end; 302 uint32_t pending_answers_num; 303 uint8_t bError; 304 uint8_t bmCommandStatus; 305 uint8_t bProtocolNum; 306 CCID_ProtocolDataStructure abProtocolDataStructure; 307 uint32_t ulProtocolDataStructureSize; 308 uint32_t state_vmstate; 309 uint32_t migration_target_ip; 310 uint16_t migration_target_port; 311 uint8_t migration_state; 312 uint8_t bmSlotICCState; 313 uint8_t powered; 314 uint8_t notify_slot_change; 315 uint8_t debug; 316 } USBCCIDState; 317 318 /* 319 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 320 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 321 * Specification. 322 * 323 * This device implemented based on the spec and with an Athena Smart Card 324 * Reader as reference: 325 * 0dc3:1004 Athena Smartcard Solutions, Inc. 326 */ 327 328 static const uint8_t qemu_ccid_descriptor[] = { 329 /* Smart Card Device Class Descriptor */ 330 0x36, /* u8 bLength; */ 331 0x21, /* u8 bDescriptorType; Functional */ 332 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 333 0x00, /* 334 * u8 bMaxSlotIndex; The index of the highest available 335 * slot on this device. All slots are consecutive starting 336 * at 00h. 337 */ 338 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 339 340 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 341 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 342 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 343 0xa0, 0x0f, 0x00, 0x00, 344 /* u32 dwMaximumClock; */ 345 0x00, 0x00, 0x01, 0x00, 346 0x00, /* u8 bNumClockSupported; * 347 * 0 means just the default and max. */ 348 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 349 0x80, 0x25, 0x00, 0x00, 350 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 351 0x00, 0xC2, 0x01, 0x00, 352 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 353 * default and max */ 354 /* u32 dwMaxIFSD; * 355 * maximum IFSD supported by CCID for protocol * 356 * T=1 (Maximum seen from various cards) */ 357 0xfe, 0x00, 0x00, 0x00, 358 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 359 0x00, 0x00, 0x00, 0x00, 360 /* u32 dwMechanical; 0 - no special characteristics. */ 361 0x00, 0x00, 0x00, 0x00, 362 /* 363 * u32 dwFeatures; 364 * 0 - No special characteristics 365 * + 2 Automatic parameter configuration based on ATR data 366 * + 4 Automatic activation of ICC on inserting 367 * + 8 Automatic ICC voltage selection 368 * + 10 Automatic ICC clock frequency change 369 * + 20 Automatic baud rate change 370 * + 40 Automatic parameters negotiation made by the CCID 371 * + 80 automatic PPS made by the CCID 372 * 100 CCID can set ICC in clock stop mode 373 * 200 NAD value other then 00 accepted (T=1 protocol) 374 * + 400 Automatic IFSD exchange as first exchange (T=1) 375 * One of the following only: 376 * + 10000 TPDU level exchanges with CCID 377 * 20000 Short APDU level exchange with CCID 378 * 40000 Short and Extended APDU level exchange with CCID 379 * 380 * 100000 USB Wake up signaling supported on card 381 * insertion and removal. Must set bit 5 in bmAttributes 382 * in Configuration descriptor if 100000 is set. 383 */ 384 0xfe, 0x04, 0x01, 0x00, 385 /* 386 * u32 dwMaxCCIDMessageLength; For extended APDU in 387 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 388 * wMaxPacketSize of the Bulk-OUT endpoint 389 */ 390 0x12, 0x00, 0x01, 0x00, 391 0xFF, /* 392 * u8 bClassGetResponse; Significant only for CCID that 393 * offers an APDU level for exchanges. Indicates the 394 * default class value used by the CCID when it sends a 395 * Get Response command to perform the transportation of 396 * an APDU by T=0 protocol 397 * FFh indicates that the CCID echos the class of the APDU. 398 */ 399 0xFF, /* 400 * u8 bClassEnvelope; EAPDU only. Envelope command for 401 * T=0 402 */ 403 0x00, 0x00, /* 404 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 405 * line for LCD display used for PIN entry. 0000 - no LCD 406 */ 407 0x01, /* 408 * u8 bPINSupport; 01h PIN Verification, 409 * 02h PIN Modification 410 */ 411 0x01, /* u8 bMaxCCIDBusySlots; */ 412 }; 413 414 enum { 415 STR_MANUFACTURER = 1, 416 STR_PRODUCT, 417 STR_SERIALNUMBER, 418 STR_INTERFACE, 419 }; 420 421 static const USBDescStrings desc_strings = { 422 [STR_MANUFACTURER] = "QEMU", 423 [STR_PRODUCT] = "QEMU USB CCID", 424 [STR_SERIALNUMBER] = "1", 425 [STR_INTERFACE] = "CCID Interface", 426 }; 427 428 static const USBDescIface desc_iface0 = { 429 .bInterfaceNumber = 0, 430 .bNumEndpoints = 3, 431 .bInterfaceClass = USB_CLASS_CSCID, 432 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 433 .bInterfaceProtocol = 0x00, 434 .iInterface = STR_INTERFACE, 435 .ndesc = 1, 436 .descs = (USBDescOther[]) { 437 { 438 /* smartcard descriptor */ 439 .data = qemu_ccid_descriptor, 440 }, 441 }, 442 .eps = (USBDescEndpoint[]) { 443 { 444 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 445 .bmAttributes = USB_ENDPOINT_XFER_INT, 446 .bInterval = 255, 447 .wMaxPacketSize = 64, 448 },{ 449 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 450 .bmAttributes = USB_ENDPOINT_XFER_BULK, 451 .wMaxPacketSize = 64, 452 },{ 453 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 454 .bmAttributes = USB_ENDPOINT_XFER_BULK, 455 .wMaxPacketSize = 64, 456 }, 457 } 458 }; 459 460 static const USBDescDevice desc_device = { 461 .bcdUSB = 0x0110, 462 .bMaxPacketSize0 = 64, 463 .bNumConfigurations = 1, 464 .confs = (USBDescConfig[]) { 465 { 466 .bNumInterfaces = 1, 467 .bConfigurationValue = 1, 468 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 469 USB_CFG_ATT_WAKEUP, 470 .bMaxPower = 50, 471 .nif = 1, 472 .ifs = &desc_iface0, 473 }, 474 }, 475 }; 476 477 static const USBDesc desc_ccid = { 478 .id = { 479 .idVendor = CCID_VENDOR_ID, 480 .idProduct = CCID_PRODUCT_ID, 481 .bcdDevice = CCID_DEVICE_VERSION, 482 .iManufacturer = STR_MANUFACTURER, 483 .iProduct = STR_PRODUCT, 484 .iSerialNumber = STR_SERIALNUMBER, 485 }, 486 .full = &desc_device, 487 .str = desc_strings, 488 }; 489 490 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 491 { 492 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 493 494 if (cc->get_atr) { 495 return cc->get_atr(card, len); 496 } 497 return NULL; 498 } 499 500 static void ccid_card_apdu_from_guest(CCIDCardState *card, 501 const uint8_t *apdu, 502 uint32_t len) 503 { 504 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 505 506 if (cc->apdu_from_guest) { 507 cc->apdu_from_guest(card, apdu, len); 508 } 509 } 510 511 static void ccid_card_exitfn(CCIDCardState *card) 512 { 513 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 514 515 if (cc->exitfn) { 516 cc->exitfn(card); 517 } 518 519 } 520 521 static int ccid_card_initfn(CCIDCardState *card) 522 { 523 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 524 525 if (cc->initfn) { 526 return cc->initfn(card); 527 } 528 return 0; 529 } 530 531 static bool ccid_has_pending_answers(USBCCIDState *s) 532 { 533 return s->pending_answers_num > 0; 534 } 535 536 static void ccid_clear_pending_answers(USBCCIDState *s) 537 { 538 s->pending_answers_num = 0; 539 s->pending_answers_start = 0; 540 s->pending_answers_end = 0; 541 } 542 543 static void ccid_print_pending_answers(USBCCIDState *s) 544 { 545 Answer *answer; 546 int i, count; 547 548 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 549 if (!ccid_has_pending_answers(s)) { 550 DPRINTF(s, D_VERBOSE, " empty\n"); 551 return; 552 } 553 for (i = s->pending_answers_start, count = s->pending_answers_num ; 554 count > 0; count--, i++) { 555 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 556 if (count == 1) { 557 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 558 } else { 559 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 560 } 561 } 562 } 563 564 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 565 { 566 Answer *answer; 567 568 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 569 s->pending_answers_num++; 570 answer = 571 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 572 answer->slot = hdr->bSlot; 573 answer->seq = hdr->bSeq; 574 ccid_print_pending_answers(s); 575 } 576 577 static void ccid_remove_pending_answer(USBCCIDState *s, 578 uint8_t *slot, uint8_t *seq) 579 { 580 Answer *answer; 581 582 assert(s->pending_answers_num > 0); 583 s->pending_answers_num--; 584 answer = 585 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 586 *slot = answer->slot; 587 *seq = answer->seq; 588 ccid_print_pending_answers(s); 589 } 590 591 static void ccid_bulk_in_clear(USBCCIDState *s) 592 { 593 s->bulk_in_pending_start = 0; 594 s->bulk_in_pending_end = 0; 595 s->bulk_in_pending_num = 0; 596 } 597 598 static void ccid_bulk_in_release(USBCCIDState *s) 599 { 600 assert(s->current_bulk_in != NULL); 601 s->current_bulk_in->pos = 0; 602 s->current_bulk_in = NULL; 603 } 604 605 static void ccid_bulk_in_get(USBCCIDState *s) 606 { 607 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 608 return; 609 } 610 assert(s->bulk_in_pending_num > 0); 611 s->bulk_in_pending_num--; 612 s->current_bulk_in = 613 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 614 } 615 616 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 617 { 618 BulkIn *bulk_in; 619 620 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 621 622 /* look for an existing element */ 623 if (len > BULK_IN_BUF_SIZE) { 624 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 625 "discarding message.\n", 626 __func__, len, BULK_IN_BUF_SIZE); 627 return NULL; 628 } 629 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 630 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 631 "discarding message.\n", __func__); 632 return NULL; 633 } 634 bulk_in = 635 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 636 s->bulk_in_pending_num++; 637 bulk_in->len = len; 638 return bulk_in->data; 639 } 640 641 static void ccid_reset(USBCCIDState *s) 642 { 643 ccid_bulk_in_clear(s); 644 ccid_clear_pending_answers(s); 645 } 646 647 static void ccid_detach(USBCCIDState *s) 648 { 649 ccid_reset(s); 650 } 651 652 static void ccid_handle_reset(USBDevice *dev) 653 { 654 USBCCIDState *s = USB_CCID_DEV(dev); 655 656 DPRINTF(s, 1, "Reset\n"); 657 658 ccid_reset(s); 659 } 660 661 static const char *ccid_control_to_str(USBCCIDState *s, int request) 662 { 663 switch (request) { 664 /* generic - should be factored out if there are other debugees */ 665 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 666 return "(generic) set address"; 667 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 668 return "(generic) get descriptor"; 669 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 670 return "(generic) get configuration"; 671 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 672 return "(generic) set configuration"; 673 case DeviceRequest | USB_REQ_GET_STATUS: 674 return "(generic) get status"; 675 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 676 return "(generic) clear feature"; 677 case DeviceOutRequest | USB_REQ_SET_FEATURE: 678 return "(generic) set_feature"; 679 case InterfaceRequest | USB_REQ_GET_INTERFACE: 680 return "(generic) get interface"; 681 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 682 return "(generic) set interface"; 683 /* class requests */ 684 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 685 return "ABORT"; 686 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 687 return "GET_CLOCK_FREQUENCIES"; 688 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 689 return "GET_DATA_RATES"; 690 } 691 return "unknown"; 692 } 693 694 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 695 int value, int index, int length, uint8_t *data) 696 { 697 USBCCIDState *s = USB_CCID_DEV(dev); 698 int ret; 699 700 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 701 ccid_control_to_str(s, request), request, value); 702 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 703 if (ret >= 0) { 704 return; 705 } 706 707 switch (request) { 708 /* Class specific requests. */ 709 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 710 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 711 p->status = USB_RET_STALL; 712 break; 713 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 714 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 715 p->status = USB_RET_STALL; 716 break; 717 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 718 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 719 p->status = USB_RET_STALL; 720 break; 721 default: 722 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 723 request, value); 724 p->status = USB_RET_STALL; 725 break; 726 } 727 } 728 729 static bool ccid_card_inserted(USBCCIDState *s) 730 { 731 return s->bmSlotICCState & SLOT_0_STATE_MASK; 732 } 733 734 static uint8_t ccid_card_status(USBCCIDState *s) 735 { 736 return ccid_card_inserted(s) 737 ? (s->powered ? 738 ICC_STATUS_PRESENT_ACTIVE 739 : ICC_STATUS_PRESENT_INACTIVE 740 ) 741 : ICC_STATUS_NOT_PRESENT; 742 } 743 744 static uint8_t ccid_calc_status(USBCCIDState *s) 745 { 746 /* 747 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 748 * bmCommandStatus 749 */ 750 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 751 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 752 return ret; 753 } 754 755 static void ccid_reset_error_status(USBCCIDState *s) 756 { 757 s->bError = ERROR_CMD_NOT_SUPPORTED; 758 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 759 } 760 761 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 762 { 763 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 764 if (h == NULL) { 765 return; 766 } 767 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 768 h->b.hdr.dwLength = 0; 769 h->b.hdr.bSlot = recv->bSlot; 770 h->b.hdr.bSeq = recv->bSeq; 771 h->b.bStatus = ccid_calc_status(s); 772 h->b.bError = s->bError; 773 h->bClockStatus = CLOCK_STATUS_RUNNING; 774 ccid_reset_error_status(s); 775 usb_wakeup(s->bulk, 0); 776 } 777 778 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 779 { 780 CCID_Parameter *h; 781 uint32_t len = s->ulProtocolDataStructureSize; 782 783 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 784 if (h == NULL) { 785 return; 786 } 787 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 788 h->b.hdr.dwLength = 0; 789 h->b.hdr.bSlot = recv->bSlot; 790 h->b.hdr.bSeq = recv->bSeq; 791 h->b.bStatus = ccid_calc_status(s); 792 h->b.bError = s->bError; 793 h->bProtocolNum = s->bProtocolNum; 794 h->abProtocolDataStructure = s->abProtocolDataStructure; 795 ccid_reset_error_status(s); 796 usb_wakeup(s->bulk, 0); 797 } 798 799 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 800 const uint8_t *data, uint32_t len) 801 { 802 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 803 804 if (p == NULL) { 805 return; 806 } 807 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 808 p->b.hdr.dwLength = cpu_to_le32(len); 809 p->b.hdr.bSlot = slot; 810 p->b.hdr.bSeq = seq; 811 p->b.bStatus = ccid_calc_status(s); 812 p->b.bError = s->bError; 813 if (p->b.bError) { 814 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 815 } 816 memcpy(p->abData, data, len); 817 ccid_reset_error_status(s); 818 usb_wakeup(s->bulk, 0); 819 } 820 821 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 822 { 823 s->bmCommandStatus = COMMAND_STATUS_FAILED; 824 s->bError = error; 825 } 826 827 static void ccid_write_data_block_answer(USBCCIDState *s, 828 const uint8_t *data, uint32_t len) 829 { 830 uint8_t seq; 831 uint8_t slot; 832 833 if (!ccid_has_pending_answers(s)) { 834 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 835 ccid_report_error_failed(s, ERROR_ICC_MUTE); 836 return; 837 } 838 ccid_remove_pending_answer(s, &slot, &seq); 839 ccid_write_data_block(s, slot, seq, data, len); 840 } 841 842 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 843 { 844 int i; 845 846 if (len < 2 || !(atr[1] & 0x80)) { 847 /* too short or TD1 not included */ 848 return 0; /* T=0, default */ 849 } 850 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 851 i += !!(atr[1] & 0x80); 852 return atr[i] & 0x0f; 853 } 854 855 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 856 { 857 const uint8_t *atr = NULL; 858 uint32_t len = 0; 859 uint8_t atr_protocol_num; 860 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 861 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 862 863 if (s->card) { 864 atr = ccid_card_get_atr(s->card, &len); 865 } 866 atr_protocol_num = atr_get_protocol_num(atr, len); 867 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 868 atr_protocol_num); 869 /* set parameters from ATR - see spec page 109 */ 870 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 871 : s->bProtocolNum); 872 switch (atr_protocol_num) { 873 case 0: 874 /* TODO: unimplemented ATR T0 parameters */ 875 t0->bmFindexDindex = 0; 876 t0->bmTCCKST0 = 0; 877 t0->bGuardTimeT0 = 0; 878 t0->bWaitingIntegerT0 = 0; 879 t0->bClockStop = 0; 880 break; 881 case 1: 882 /* TODO: unimplemented ATR T1 parameters */ 883 t1->bmFindexDindex = 0; 884 t1->bmTCCKST1 = 0; 885 t1->bGuardTimeT1 = 0; 886 t1->bWaitingIntegerT1 = 0; 887 t1->bClockStop = 0; 888 t1->bIFSC = 0; 889 t1->bNadValue = 0; 890 break; 891 default: 892 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 893 __func__, atr_protocol_num); 894 } 895 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 896 } 897 898 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 899 { 900 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 901 uint32_t protocol_num = ph->bProtocolNum & 3; 902 903 if (protocol_num != 0 && protocol_num != 1) { 904 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 905 return; 906 } 907 s->bProtocolNum = protocol_num; 908 s->abProtocolDataStructure = ph->abProtocolDataStructure; 909 } 910 911 /* 912 * must be 5 bytes for T=0, 7 bytes for T=1 913 * See page 52 914 */ 915 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 916 .t1 = { 917 .bmFindexDindex = 0x77, 918 .bmTCCKST1 = 0x00, 919 .bGuardTimeT1 = 0x00, 920 .bWaitingIntegerT1 = 0x00, 921 .bClockStop = 0x00, 922 .bIFSC = 0xfe, 923 .bNadValue = 0x00, 924 } 925 }; 926 927 static void ccid_reset_parameters(USBCCIDState *s) 928 { 929 s->bProtocolNum = 0; /* T=0 */ 930 s->abProtocolDataStructure = defaultProtocolDataStructure; 931 } 932 933 /* NOTE: only a single slot is supported (SLOT_0) */ 934 static void ccid_on_slot_change(USBCCIDState *s, bool full) 935 { 936 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 937 uint8_t current = s->bmSlotICCState; 938 if (full) { 939 s->bmSlotICCState |= SLOT_0_STATE_MASK; 940 } else { 941 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 942 } 943 if (current != s->bmSlotICCState) { 944 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 945 } 946 s->notify_slot_change = true; 947 usb_wakeup(s->intr, 0); 948 } 949 950 static void ccid_write_data_block_error( 951 USBCCIDState *s, uint8_t slot, uint8_t seq) 952 { 953 ccid_write_data_block(s, slot, seq, NULL, 0); 954 } 955 956 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 957 { 958 uint32_t len; 959 960 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 961 DPRINTF(s, 1, 962 "usb-ccid: not sending apdu to client, no card connected\n"); 963 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 964 return; 965 } 966 len = le32_to_cpu(recv->hdr.dwLength); 967 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 968 recv->hdr.bSeq, len); 969 ccid_add_pending_answer(s, (CCID_Header *)recv); 970 if (s->card && len <= BULK_OUT_DATA_SIZE) { 971 ccid_card_apdu_from_guest(s->card, recv->abData, len); 972 } else { 973 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 974 } 975 } 976 977 static const char *ccid_message_type_to_str(uint8_t type) 978 { 979 switch (type) { 980 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 981 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 982 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 983 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 984 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 985 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 986 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 987 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 988 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 989 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 990 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 991 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 992 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 993 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 994 return "SetDataRateAndClockFrequency"; 995 } 996 return "unknown"; 997 } 998 999 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 1000 { 1001 CCID_Header *ccid_header; 1002 1003 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 1004 p->status = USB_RET_STALL; 1005 return; 1006 } 1007 ccid_header = (CCID_Header *)s->bulk_out_data; 1008 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 1009 s->bulk_out_pos += p->iov.size; 1010 if (p->iov.size == CCID_MAX_PACKET_SIZE) { 1011 DPRINTF(s, D_VERBOSE, 1012 "usb-ccid: bulk_in: expecting more packets (%zd/%d)\n", 1013 p->iov.size, ccid_header->dwLength); 1014 return; 1015 } 1016 if (s->bulk_out_pos < 10) { 1017 DPRINTF(s, 1, 1018 "%s: bad USB_TOKEN_OUT length, should be at least 10 bytes\n", 1019 __func__); 1020 } else { 1021 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1022 ccid_header->bMessageType, 1023 ccid_message_type_to_str(ccid_header->bMessageType)); 1024 switch (ccid_header->bMessageType) { 1025 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1026 ccid_write_slot_status(s, ccid_header); 1027 break; 1028 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1029 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1030 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1031 s->powered = true; 1032 if (!ccid_card_inserted(s)) { 1033 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1034 } 1035 /* atr is written regardless of error. */ 1036 ccid_write_data_block_atr(s, ccid_header); 1037 break; 1038 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1039 ccid_reset_error_status(s); 1040 s->powered = false; 1041 ccid_write_slot_status(s, ccid_header); 1042 break; 1043 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1044 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1045 break; 1046 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1047 ccid_reset_error_status(s); 1048 ccid_set_parameters(s, ccid_header); 1049 ccid_write_parameters(s, ccid_header); 1050 break; 1051 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1052 ccid_reset_error_status(s); 1053 ccid_reset_parameters(s); 1054 ccid_write_parameters(s, ccid_header); 1055 break; 1056 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1057 ccid_reset_error_status(s); 1058 ccid_write_parameters(s, ccid_header); 1059 break; 1060 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1061 ccid_report_error_failed(s, 0); 1062 ccid_write_slot_status(s, ccid_header); 1063 break; 1064 default: 1065 DPRINTF(s, 1, 1066 "handle_data: ERROR: unhandled message type %Xh\n", 1067 ccid_header->bMessageType); 1068 /* 1069 * The caller is expecting the device to respond, tell it we 1070 * don't support the operation. 1071 */ 1072 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1073 ccid_write_slot_status(s, ccid_header); 1074 break; 1075 } 1076 } 1077 s->bulk_out_pos = 0; 1078 } 1079 1080 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p) 1081 { 1082 int len = 0; 1083 1084 ccid_bulk_in_get(s); 1085 if (s->current_bulk_in != NULL) { 1086 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1087 p->iov.size); 1088 usb_packet_copy(p, s->current_bulk_in->data + 1089 s->current_bulk_in->pos, len); 1090 s->current_bulk_in->pos += len; 1091 if (s->current_bulk_in->pos == s->current_bulk_in->len) { 1092 ccid_bulk_in_release(s); 1093 } 1094 } else { 1095 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1096 p->status = USB_RET_NAK; 1097 } 1098 if (len) { 1099 DPRINTF(s, D_MORE_INFO, 1100 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1101 __func__, p->iov.size, len); 1102 } 1103 if (len < p->iov.size) { 1104 DPRINTF(s, 1, 1105 "%s: returning short (EREMOTEIO) %d < %zd\n", 1106 __func__, len, p->iov.size); 1107 } 1108 } 1109 1110 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1111 { 1112 USBCCIDState *s = USB_CCID_DEV(dev); 1113 uint8_t buf[2]; 1114 1115 switch (p->pid) { 1116 case USB_TOKEN_OUT: 1117 ccid_handle_bulk_out(s, p); 1118 break; 1119 1120 case USB_TOKEN_IN: 1121 switch (p->ep->nr) { 1122 case CCID_BULK_IN_EP: 1123 ccid_bulk_in_copy_to_guest(s, p); 1124 break; 1125 case CCID_INT_IN_EP: 1126 if (s->notify_slot_change) { 1127 /* page 56, RDR_to_PC_NotifySlotChange */ 1128 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1129 buf[1] = s->bmSlotICCState; 1130 usb_packet_copy(p, buf, 2); 1131 s->notify_slot_change = false; 1132 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1133 DPRINTF(s, D_INFO, 1134 "handle_data: int_in: notify_slot_change %X, " 1135 "requested len %zd\n", 1136 s->bmSlotICCState, p->iov.size); 1137 } else { 1138 p->status = USB_RET_NAK; 1139 } 1140 break; 1141 default: 1142 DPRINTF(s, 1, "Bad endpoint\n"); 1143 p->status = USB_RET_STALL; 1144 break; 1145 } 1146 break; 1147 default: 1148 DPRINTF(s, 1, "Bad token\n"); 1149 p->status = USB_RET_STALL; 1150 break; 1151 } 1152 } 1153 1154 static void ccid_handle_destroy(USBDevice *dev) 1155 { 1156 USBCCIDState *s = USB_CCID_DEV(dev); 1157 1158 ccid_bulk_in_clear(s); 1159 } 1160 1161 static void ccid_flush_pending_answers(USBCCIDState *s) 1162 { 1163 while (ccid_has_pending_answers(s)) { 1164 ccid_write_data_block_answer(s, NULL, 0); 1165 } 1166 } 1167 1168 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1169 { 1170 return s->pending_answers_num == 0 1171 ? NULL 1172 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1173 } 1174 1175 static Property ccid_props[] = { 1176 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1177 DEFINE_PROP_END_OF_LIST(), 1178 }; 1179 1180 #define TYPE_CCID_BUS "ccid-bus" 1181 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1182 1183 static const TypeInfo ccid_bus_info = { 1184 .name = TYPE_CCID_BUS, 1185 .parent = TYPE_BUS, 1186 .instance_size = sizeof(CCIDBus), 1187 }; 1188 1189 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1190 uint8_t *apdu, uint32_t len) 1191 { 1192 DeviceState *qdev = DEVICE(card); 1193 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1194 USBCCIDState *s = USB_CCID_DEV(dev); 1195 Answer *answer; 1196 1197 if (!ccid_has_pending_answers(s)) { 1198 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1199 return; 1200 } 1201 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1202 answer = ccid_peek_next_answer(s); 1203 if (answer == NULL) { 1204 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1205 ccid_report_error_failed(s, ERROR_HW_ERROR); 1206 return; 1207 } 1208 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1209 len, answer->seq, answer->slot); 1210 ccid_write_data_block_answer(s, apdu, len); 1211 } 1212 1213 void ccid_card_card_removed(CCIDCardState *card) 1214 { 1215 DeviceState *qdev = DEVICE(card); 1216 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1217 USBCCIDState *s = USB_CCID_DEV(dev); 1218 1219 ccid_on_slot_change(s, false); 1220 ccid_flush_pending_answers(s); 1221 ccid_reset(s); 1222 } 1223 1224 int ccid_card_ccid_attach(CCIDCardState *card) 1225 { 1226 DeviceState *qdev = DEVICE(card); 1227 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1228 USBCCIDState *s = USB_CCID_DEV(dev); 1229 1230 DPRINTF(s, 1, "CCID Attach\n"); 1231 if (s->migration_state == MIGRATION_MIGRATED) { 1232 s->migration_state = MIGRATION_NONE; 1233 } 1234 return 0; 1235 } 1236 1237 void ccid_card_ccid_detach(CCIDCardState *card) 1238 { 1239 DeviceState *qdev = DEVICE(card); 1240 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1241 USBCCIDState *s = USB_CCID_DEV(dev); 1242 1243 DPRINTF(s, 1, "CCID Detach\n"); 1244 if (ccid_card_inserted(s)) { 1245 ccid_on_slot_change(s, false); 1246 } 1247 ccid_detach(s); 1248 } 1249 1250 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1251 { 1252 DeviceState *qdev = DEVICE(card); 1253 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1254 USBCCIDState *s = USB_CCID_DEV(dev); 1255 1256 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1257 s->last_answer_error = error; 1258 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1259 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1260 /* 1261 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1262 * so check that first to not trigger abort 1263 */ 1264 if (ccid_has_pending_answers(s)) { 1265 ccid_write_data_block_answer(s, NULL, 0); 1266 } 1267 } 1268 1269 void ccid_card_card_inserted(CCIDCardState *card) 1270 { 1271 DeviceState *qdev = DEVICE(card); 1272 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1273 USBCCIDState *s = USB_CCID_DEV(dev); 1274 1275 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1276 ccid_flush_pending_answers(s); 1277 ccid_on_slot_change(s, true); 1278 } 1279 1280 static int ccid_card_exit(DeviceState *qdev) 1281 { 1282 CCIDCardState *card = CCID_CARD(qdev); 1283 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1284 USBCCIDState *s = USB_CCID_DEV(dev); 1285 1286 if (ccid_card_inserted(s)) { 1287 ccid_card_card_removed(card); 1288 } 1289 ccid_card_exitfn(card); 1290 s->card = NULL; 1291 return 0; 1292 } 1293 1294 static int ccid_card_init(DeviceState *qdev) 1295 { 1296 CCIDCardState *card = CCID_CARD(qdev); 1297 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1298 USBCCIDState *s = USB_CCID_DEV(dev); 1299 int ret = 0; 1300 1301 if (card->slot != 0) { 1302 error_report("Warning: usb-ccid supports one slot, can't add %d", 1303 card->slot); 1304 return -1; 1305 } 1306 if (s->card != NULL) { 1307 error_report("Warning: usb-ccid card already full, not adding"); 1308 return -1; 1309 } 1310 ret = ccid_card_initfn(card); 1311 if (ret == 0) { 1312 s->card = card; 1313 } 1314 return ret; 1315 } 1316 1317 static void ccid_realize(USBDevice *dev, Error **errp) 1318 { 1319 USBCCIDState *s = USB_CCID_DEV(dev); 1320 1321 usb_desc_create_serial(dev); 1322 usb_desc_init(dev); 1323 qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), 1324 NULL); 1325 qbus_set_hotplug_handler(BUS(&s->bus), DEVICE(dev), &error_abort); 1326 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1327 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1328 s->card = NULL; 1329 s->migration_state = MIGRATION_NONE; 1330 s->migration_target_ip = 0; 1331 s->migration_target_port = 0; 1332 s->dev.speed = USB_SPEED_FULL; 1333 s->dev.speedmask = USB_SPEED_MASK_FULL; 1334 s->notify_slot_change = false; 1335 s->powered = true; 1336 s->pending_answers_num = 0; 1337 s->last_answer_error = 0; 1338 s->bulk_in_pending_start = 0; 1339 s->bulk_in_pending_end = 0; 1340 s->current_bulk_in = NULL; 1341 ccid_reset_error_status(s); 1342 s->bulk_out_pos = 0; 1343 ccid_reset_parameters(s); 1344 ccid_reset(s); 1345 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1346 } 1347 1348 static int ccid_post_load(void *opaque, int version_id) 1349 { 1350 USBCCIDState *s = opaque; 1351 1352 /* 1353 * This must be done after usb_device_attach, which sets state to ATTACHED, 1354 * while it must be DEFAULT in order to accept packets (like it is after 1355 * reset, but reset will reset our addr and call our reset handler which 1356 * may change state, and we don't want to do that when migrating). 1357 */ 1358 s->dev.state = s->state_vmstate; 1359 return 0; 1360 } 1361 1362 static void ccid_pre_save(void *opaque) 1363 { 1364 USBCCIDState *s = opaque; 1365 1366 s->state_vmstate = s->dev.state; 1367 if (s->dev.attached) { 1368 /* 1369 * Migrating an open device, ignore reconnection CHR_EVENT to avoid an 1370 * erroneous detach. 1371 */ 1372 s->migration_state = MIGRATION_MIGRATED; 1373 } 1374 } 1375 1376 static VMStateDescription bulk_in_vmstate = { 1377 .name = "CCID BulkIn state", 1378 .version_id = 1, 1379 .minimum_version_id = 1, 1380 .fields = (VMStateField[]) { 1381 VMSTATE_BUFFER(data, BulkIn), 1382 VMSTATE_UINT32(len, BulkIn), 1383 VMSTATE_UINT32(pos, BulkIn), 1384 VMSTATE_END_OF_LIST() 1385 } 1386 }; 1387 1388 static VMStateDescription answer_vmstate = { 1389 .name = "CCID Answer state", 1390 .version_id = 1, 1391 .minimum_version_id = 1, 1392 .fields = (VMStateField[]) { 1393 VMSTATE_UINT8(slot, Answer), 1394 VMSTATE_UINT8(seq, Answer), 1395 VMSTATE_END_OF_LIST() 1396 } 1397 }; 1398 1399 static VMStateDescription usb_device_vmstate = { 1400 .name = "usb_device", 1401 .version_id = 1, 1402 .minimum_version_id = 1, 1403 .fields = (VMStateField[]) { 1404 VMSTATE_UINT8(addr, USBDevice), 1405 VMSTATE_BUFFER(setup_buf, USBDevice), 1406 VMSTATE_BUFFER(data_buf, USBDevice), 1407 VMSTATE_END_OF_LIST() 1408 } 1409 }; 1410 1411 static VMStateDescription ccid_vmstate = { 1412 .name = "usb-ccid", 1413 .version_id = 1, 1414 .minimum_version_id = 1, 1415 .post_load = ccid_post_load, 1416 .pre_save = ccid_pre_save, 1417 .fields = (VMStateField[]) { 1418 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1419 VMSTATE_UINT8(debug, USBCCIDState), 1420 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1421 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1422 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1423 VMSTATE_UINT8(powered, USBCCIDState), 1424 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1425 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1426 VMSTATE_UINT8(bError, USBCCIDState), 1427 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1428 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1429 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1430 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1431 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1432 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1433 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1434 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1435 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1436 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1437 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1438 VMSTATE_UINT8(migration_state, USBCCIDState), 1439 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1440 VMSTATE_END_OF_LIST() 1441 } 1442 }; 1443 1444 static Property ccid_properties[] = { 1445 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1446 DEFINE_PROP_END_OF_LIST(), 1447 }; 1448 1449 static void ccid_class_initfn(ObjectClass *klass, void *data) 1450 { 1451 DeviceClass *dc = DEVICE_CLASS(klass); 1452 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1453 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1454 1455 uc->realize = ccid_realize; 1456 uc->product_desc = "QEMU USB CCID"; 1457 uc->usb_desc = &desc_ccid; 1458 uc->handle_reset = ccid_handle_reset; 1459 uc->handle_control = ccid_handle_control; 1460 uc->handle_data = ccid_handle_data; 1461 uc->handle_destroy = ccid_handle_destroy; 1462 dc->desc = "CCID Rev 1.1 smartcard reader"; 1463 dc->vmsd = &ccid_vmstate; 1464 dc->props = ccid_properties; 1465 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1466 hc->unplug = qdev_simple_device_unplug_cb; 1467 } 1468 1469 static const TypeInfo ccid_info = { 1470 .name = CCID_DEV_NAME, 1471 .parent = TYPE_USB_DEVICE, 1472 .instance_size = sizeof(USBCCIDState), 1473 .class_init = ccid_class_initfn, 1474 .interfaces = (InterfaceInfo[]) { 1475 { TYPE_HOTPLUG_HANDLER }, 1476 { } 1477 } 1478 }; 1479 1480 static void ccid_card_class_init(ObjectClass *klass, void *data) 1481 { 1482 DeviceClass *k = DEVICE_CLASS(klass); 1483 k->bus_type = TYPE_CCID_BUS; 1484 k->init = ccid_card_init; 1485 k->exit = ccid_card_exit; 1486 k->props = ccid_props; 1487 } 1488 1489 static const TypeInfo ccid_card_type_info = { 1490 .name = TYPE_CCID_CARD, 1491 .parent = TYPE_DEVICE, 1492 .instance_size = sizeof(CCIDCardState), 1493 .abstract = true, 1494 .class_size = sizeof(CCIDCardClass), 1495 .class_init = ccid_card_class_init, 1496 }; 1497 1498 static void ccid_register_types(void) 1499 { 1500 type_register_static(&ccid_bus_info); 1501 type_register_static(&ccid_card_type_info); 1502 type_register_static(&ccid_info); 1503 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1504 } 1505 1506 type_init(ccid_register_types) 1507