1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qemu/units.h" 39 #include "qapi/error.h" 40 #include "qemu-common.h" 41 #include "qemu/error-report.h" 42 #include "qemu/module.h" 43 #include "hw/qdev-properties.h" 44 #include "hw/usb.h" 45 #include "migration/vmstate.h" 46 #include "desc.h" 47 48 #include "ccid.h" 49 #include "qom/object.h" 50 51 #define DPRINTF(s, lvl, fmt, ...) \ 52 do { \ 53 if (lvl <= s->debug) { \ 54 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 55 } \ 56 } while (0) 57 58 #define D_WARN 1 59 #define D_INFO 2 60 #define D_MORE_INFO 3 61 #define D_VERBOSE 4 62 63 #define TYPE_USB_CCID_DEV "usb-ccid" 64 OBJECT_DECLARE_SIMPLE_TYPE(USBCCIDState, USB_CCID_DEV) 65 /* 66 * The two options for variable sized buffers: 67 * make them constant size, for large enough constant, 68 * or handle the migration complexity - VMState doesn't handle this case. 69 * sizes are expected never to be exceeded, unless guest misbehaves. 70 */ 71 #define BULK_OUT_DATA_SIZE (64 * KiB) 72 #define PENDING_ANSWERS_NUM 128 73 74 #define BULK_IN_BUF_SIZE 384 75 #define BULK_IN_PENDING_NUM 8 76 77 #define CCID_MAX_PACKET_SIZE 64 78 79 #define CCID_CONTROL_ABORT 0x1 80 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 81 #define CCID_CONTROL_GET_DATA_RATES 0x3 82 83 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 84 #define CCID_VENDOR_DESCRIPTION "QEMU" 85 #define CCID_INTERFACE_NAME "CCID Interface" 86 #define CCID_SERIAL_NUMBER_STRING "1" 87 /* 88 * Using Gemplus Vendor and Product id 89 * Effect on various drivers: 90 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 91 * linux has a number of class drivers, but openct filters based on 92 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 93 */ 94 #define CCID_VENDOR_ID 0x08e6 95 #define CCID_PRODUCT_ID 0x4433 96 #define CCID_DEVICE_VERSION 0x0000 97 98 /* 99 * BULK_OUT messages from PC to Reader 100 * Defined in CCID Rev 1.1 6.1 (page 26) 101 */ 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 111 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 112 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 113 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 114 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 115 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 116 117 /* 118 * BULK_IN messages from Reader to PC 119 * Defined in CCID Rev 1.1 6.2 (page 48) 120 */ 121 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 122 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 123 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 124 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 125 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 126 127 /* 128 * INTERRUPT_IN messages from Reader to PC 129 * Defined in CCID Rev 1.1 6.3 (page 56) 130 */ 131 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 132 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 133 134 /* 135 * Endpoints for CCID - addresses are up to us to decide. 136 * To support slot insertion and removal we must have an interrupt in ep 137 * in addition we need a bulk in and bulk out ep 138 * 5.2, page 20 139 */ 140 #define CCID_INT_IN_EP 1 141 #define CCID_BULK_IN_EP 2 142 #define CCID_BULK_OUT_EP 3 143 144 /* bmSlotICCState masks */ 145 #define SLOT_0_STATE_MASK 1 146 #define SLOT_0_CHANGED_MASK 2 147 148 /* Status codes that go in bStatus (see 6.2.6) */ 149 enum { 150 ICC_STATUS_PRESENT_ACTIVE = 0, 151 ICC_STATUS_PRESENT_INACTIVE, 152 ICC_STATUS_NOT_PRESENT 153 }; 154 155 enum { 156 COMMAND_STATUS_NO_ERROR = 0, 157 COMMAND_STATUS_FAILED, 158 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 159 }; 160 161 /* Error codes that go in bError (see 6.2.6) */ 162 enum { 163 ERROR_CMD_NOT_SUPPORTED = 0, 164 ERROR_CMD_ABORTED = -1, 165 ERROR_ICC_MUTE = -2, 166 ERROR_XFR_PARITY_ERROR = -3, 167 ERROR_XFR_OVERRUN = -4, 168 ERROR_HW_ERROR = -5, 169 }; 170 171 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 172 enum { 173 CLOCK_STATUS_RUNNING = 0, 174 /* 175 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 176 * 3 - unknown state. rest are RFU 177 */ 178 }; 179 180 typedef struct QEMU_PACKED CCID_Header { 181 uint8_t bMessageType; 182 uint32_t dwLength; 183 uint8_t bSlot; 184 uint8_t bSeq; 185 } CCID_Header; 186 187 typedef struct QEMU_PACKED CCID_BULK_IN { 188 CCID_Header hdr; 189 uint8_t bStatus; /* Only used in BULK_IN */ 190 uint8_t bError; /* Only used in BULK_IN */ 191 } CCID_BULK_IN; 192 193 typedef struct QEMU_PACKED CCID_SlotStatus { 194 CCID_BULK_IN b; 195 uint8_t bClockStatus; 196 } CCID_SlotStatus; 197 198 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 199 uint8_t bmFindexDindex; 200 uint8_t bmTCCKST0; 201 uint8_t bGuardTimeT0; 202 uint8_t bWaitingIntegerT0; 203 uint8_t bClockStop; 204 } CCID_T0ProtocolDataStructure; 205 206 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 207 uint8_t bmFindexDindex; 208 uint8_t bmTCCKST1; 209 uint8_t bGuardTimeT1; 210 uint8_t bWaitingIntegerT1; 211 uint8_t bClockStop; 212 uint8_t bIFSC; 213 uint8_t bNadValue; 214 } CCID_T1ProtocolDataStructure; 215 216 typedef union CCID_ProtocolDataStructure { 217 CCID_T0ProtocolDataStructure t0; 218 CCID_T1ProtocolDataStructure t1; 219 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 220 } CCID_ProtocolDataStructure; 221 222 typedef struct QEMU_PACKED CCID_Parameter { 223 CCID_BULK_IN b; 224 uint8_t bProtocolNum; 225 CCID_ProtocolDataStructure abProtocolDataStructure; 226 } CCID_Parameter; 227 228 typedef struct QEMU_PACKED CCID_DataBlock { 229 CCID_BULK_IN b; 230 uint8_t bChainParameter; 231 uint8_t abData[]; 232 } CCID_DataBlock; 233 234 /* 6.1.4 PC_to_RDR_XfrBlock */ 235 typedef struct QEMU_PACKED CCID_XferBlock { 236 CCID_Header hdr; 237 uint8_t bBWI; /* Block Waiting Timeout */ 238 uint16_t wLevelParameter; /* XXX currently unused */ 239 uint8_t abData[]; 240 } CCID_XferBlock; 241 242 typedef struct QEMU_PACKED CCID_IccPowerOn { 243 CCID_Header hdr; 244 uint8_t bPowerSelect; 245 uint16_t abRFU; 246 } CCID_IccPowerOn; 247 248 typedef struct QEMU_PACKED CCID_IccPowerOff { 249 CCID_Header hdr; 250 uint16_t abRFU; 251 } CCID_IccPowerOff; 252 253 typedef struct QEMU_PACKED CCID_SetParameters { 254 CCID_Header hdr; 255 uint8_t bProtocolNum; 256 uint16_t abRFU; 257 CCID_ProtocolDataStructure abProtocolDataStructure; 258 } CCID_SetParameters; 259 260 typedef struct CCID_Notify_Slot_Change { 261 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 262 uint8_t bmSlotICCState; 263 } CCID_Notify_Slot_Change; 264 265 /* used for DataBlock response to XferBlock */ 266 typedef struct Answer { 267 uint8_t slot; 268 uint8_t seq; 269 } Answer; 270 271 /* pending BULK_IN messages */ 272 typedef struct BulkIn { 273 uint8_t data[BULK_IN_BUF_SIZE]; 274 uint32_t len; 275 uint32_t pos; 276 } BulkIn; 277 278 struct CCIDBus { 279 BusState qbus; 280 }; 281 typedef struct CCIDBus CCIDBus; 282 283 /* 284 * powered - defaults to true, changed by PowerOn/PowerOff messages 285 */ 286 struct USBCCIDState { 287 USBDevice dev; 288 USBEndpoint *intr; 289 USBEndpoint *bulk; 290 CCIDBus bus; 291 CCIDCardState *card; 292 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 293 uint32_t bulk_in_pending_start; 294 uint32_t bulk_in_pending_end; /* first free */ 295 uint32_t bulk_in_pending_num; 296 BulkIn *current_bulk_in; 297 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 298 uint32_t bulk_out_pos; 299 uint64_t last_answer_error; 300 Answer pending_answers[PENDING_ANSWERS_NUM]; 301 uint32_t pending_answers_start; 302 uint32_t pending_answers_end; 303 uint32_t pending_answers_num; 304 uint8_t bError; 305 uint8_t bmCommandStatus; 306 uint8_t bProtocolNum; 307 CCID_ProtocolDataStructure abProtocolDataStructure; 308 uint32_t ulProtocolDataStructureSize; 309 uint32_t state_vmstate; 310 uint8_t bmSlotICCState; 311 uint8_t powered; 312 uint8_t notify_slot_change; 313 uint8_t debug; 314 }; 315 316 /* 317 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 318 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 319 * Specification. 320 * 321 * This device implemented based on the spec and with an Athena Smart Card 322 * Reader as reference: 323 * 0dc3:1004 Athena Smartcard Solutions, Inc. 324 */ 325 326 static const uint8_t qemu_ccid_descriptor[] = { 327 /* Smart Card Device Class Descriptor */ 328 0x36, /* u8 bLength; */ 329 0x21, /* u8 bDescriptorType; Functional */ 330 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 331 0x00, /* 332 * u8 bMaxSlotIndex; The index of the highest available 333 * slot on this device. All slots are consecutive starting 334 * at 00h. 335 */ 336 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 337 338 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 339 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 340 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 341 0xa0, 0x0f, 0x00, 0x00, 342 /* u32 dwMaximumClock; */ 343 0x00, 0x00, 0x01, 0x00, 344 0x00, /* u8 bNumClockSupported; * 345 * 0 means just the default and max. */ 346 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 347 0x80, 0x25, 0x00, 0x00, 348 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 349 0x00, 0xC2, 0x01, 0x00, 350 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 351 * default and max */ 352 /* u32 dwMaxIFSD; * 353 * maximum IFSD supported by CCID for protocol * 354 * T=1 (Maximum seen from various cards) */ 355 0xfe, 0x00, 0x00, 0x00, 356 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 357 0x00, 0x00, 0x00, 0x00, 358 /* u32 dwMechanical; 0 - no special characteristics. */ 359 0x00, 0x00, 0x00, 0x00, 360 /* 361 * u32 dwFeatures; 362 * 0 - No special characteristics 363 * + 2 Automatic parameter configuration based on ATR data 364 * + 4 Automatic activation of ICC on inserting 365 * + 8 Automatic ICC voltage selection 366 * + 10 Automatic ICC clock frequency change 367 * + 20 Automatic baud rate change 368 * + 40 Automatic parameters negotiation made by the CCID 369 * + 80 automatic PPS made by the CCID 370 * 100 CCID can set ICC in clock stop mode 371 * 200 NAD value other then 00 accepted (T=1 protocol) 372 * + 400 Automatic IFSD exchange as first exchange (T=1) 373 * One of the following only: 374 * + 10000 TPDU level exchanges with CCID 375 * 20000 Short APDU level exchange with CCID 376 * 40000 Short and Extended APDU level exchange with CCID 377 * 378 * 100000 USB Wake up signaling supported on card 379 * insertion and removal. Must set bit 5 in bmAttributes 380 * in Configuration descriptor if 100000 is set. 381 */ 382 0xfe, 0x04, 0x01, 0x00, 383 /* 384 * u32 dwMaxCCIDMessageLength; For extended APDU in 385 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 386 * wMaxPacketSize of the Bulk-OUT endpoint 387 */ 388 0x12, 0x00, 0x01, 0x00, 389 0xFF, /* 390 * u8 bClassGetResponse; Significant only for CCID that 391 * offers an APDU level for exchanges. Indicates the 392 * default class value used by the CCID when it sends a 393 * Get Response command to perform the transportation of 394 * an APDU by T=0 protocol 395 * FFh indicates that the CCID echos the class of the APDU. 396 */ 397 0xFF, /* 398 * u8 bClassEnvelope; EAPDU only. Envelope command for 399 * T=0 400 */ 401 0x00, 0x00, /* 402 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 403 * line for LCD display used for PIN entry. 0000 - no LCD 404 */ 405 0x01, /* 406 * u8 bPINSupport; 01h PIN Verification, 407 * 02h PIN Modification 408 */ 409 0x01, /* u8 bMaxCCIDBusySlots; */ 410 }; 411 412 enum { 413 STR_MANUFACTURER = 1, 414 STR_PRODUCT, 415 STR_SERIALNUMBER, 416 STR_INTERFACE, 417 }; 418 419 static const USBDescStrings desc_strings = { 420 [STR_MANUFACTURER] = "QEMU", 421 [STR_PRODUCT] = "QEMU USB CCID", 422 [STR_SERIALNUMBER] = "1", 423 [STR_INTERFACE] = "CCID Interface", 424 }; 425 426 static const USBDescIface desc_iface0 = { 427 .bInterfaceNumber = 0, 428 .bNumEndpoints = 3, 429 .bInterfaceClass = USB_CLASS_CSCID, 430 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 431 .bInterfaceProtocol = 0x00, 432 .iInterface = STR_INTERFACE, 433 .ndesc = 1, 434 .descs = (USBDescOther[]) { 435 { 436 /* smartcard descriptor */ 437 .data = qemu_ccid_descriptor, 438 }, 439 }, 440 .eps = (USBDescEndpoint[]) { 441 { 442 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 443 .bmAttributes = USB_ENDPOINT_XFER_INT, 444 .bInterval = 255, 445 .wMaxPacketSize = 64, 446 },{ 447 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 448 .bmAttributes = USB_ENDPOINT_XFER_BULK, 449 .wMaxPacketSize = 64, 450 },{ 451 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 452 .bmAttributes = USB_ENDPOINT_XFER_BULK, 453 .wMaxPacketSize = 64, 454 }, 455 } 456 }; 457 458 static const USBDescDevice desc_device = { 459 .bcdUSB = 0x0110, 460 .bMaxPacketSize0 = 64, 461 .bNumConfigurations = 1, 462 .confs = (USBDescConfig[]) { 463 { 464 .bNumInterfaces = 1, 465 .bConfigurationValue = 1, 466 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 467 USB_CFG_ATT_WAKEUP, 468 .bMaxPower = 50, 469 .nif = 1, 470 .ifs = &desc_iface0, 471 }, 472 }, 473 }; 474 475 static const USBDesc desc_ccid = { 476 .id = { 477 .idVendor = CCID_VENDOR_ID, 478 .idProduct = CCID_PRODUCT_ID, 479 .bcdDevice = CCID_DEVICE_VERSION, 480 .iManufacturer = STR_MANUFACTURER, 481 .iProduct = STR_PRODUCT, 482 .iSerialNumber = STR_SERIALNUMBER, 483 }, 484 .full = &desc_device, 485 .str = desc_strings, 486 }; 487 488 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 489 { 490 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 491 492 if (cc->get_atr) { 493 return cc->get_atr(card, len); 494 } 495 return NULL; 496 } 497 498 static void ccid_card_apdu_from_guest(CCIDCardState *card, 499 const uint8_t *apdu, 500 uint32_t len) 501 { 502 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 503 504 if (cc->apdu_from_guest) { 505 cc->apdu_from_guest(card, apdu, len); 506 } 507 } 508 509 static bool ccid_has_pending_answers(USBCCIDState *s) 510 { 511 return s->pending_answers_num > 0; 512 } 513 514 static void ccid_clear_pending_answers(USBCCIDState *s) 515 { 516 s->pending_answers_num = 0; 517 s->pending_answers_start = 0; 518 s->pending_answers_end = 0; 519 } 520 521 static void ccid_print_pending_answers(USBCCIDState *s) 522 { 523 Answer *answer; 524 int i, count; 525 526 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 527 if (!ccid_has_pending_answers(s)) { 528 DPRINTF(s, D_VERBOSE, " empty\n"); 529 return; 530 } 531 for (i = s->pending_answers_start, count = s->pending_answers_num ; 532 count > 0; count--, i++) { 533 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 534 if (count == 1) { 535 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 536 } else { 537 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 538 } 539 } 540 } 541 542 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 543 { 544 Answer *answer; 545 546 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 547 s->pending_answers_num++; 548 answer = 549 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 550 answer->slot = hdr->bSlot; 551 answer->seq = hdr->bSeq; 552 ccid_print_pending_answers(s); 553 } 554 555 static void ccid_remove_pending_answer(USBCCIDState *s, 556 uint8_t *slot, uint8_t *seq) 557 { 558 Answer *answer; 559 560 assert(s->pending_answers_num > 0); 561 s->pending_answers_num--; 562 answer = 563 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 564 *slot = answer->slot; 565 *seq = answer->seq; 566 ccid_print_pending_answers(s); 567 } 568 569 static void ccid_bulk_in_clear(USBCCIDState *s) 570 { 571 s->bulk_in_pending_start = 0; 572 s->bulk_in_pending_end = 0; 573 s->bulk_in_pending_num = 0; 574 } 575 576 static void ccid_bulk_in_release(USBCCIDState *s) 577 { 578 assert(s->current_bulk_in != NULL); 579 s->current_bulk_in->pos = 0; 580 s->current_bulk_in = NULL; 581 } 582 583 static void ccid_bulk_in_get(USBCCIDState *s) 584 { 585 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 586 return; 587 } 588 assert(s->bulk_in_pending_num > 0); 589 s->bulk_in_pending_num--; 590 s->current_bulk_in = 591 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 592 } 593 594 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 595 { 596 BulkIn *bulk_in; 597 598 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 599 600 /* look for an existing element */ 601 if (len > BULK_IN_BUF_SIZE) { 602 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 603 "discarding message.\n", 604 __func__, len, BULK_IN_BUF_SIZE); 605 return NULL; 606 } 607 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 608 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 609 "discarding message.\n", __func__); 610 return NULL; 611 } 612 bulk_in = 613 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 614 s->bulk_in_pending_num++; 615 bulk_in->len = len; 616 return bulk_in->data; 617 } 618 619 static void ccid_reset(USBCCIDState *s) 620 { 621 ccid_bulk_in_clear(s); 622 ccid_clear_pending_answers(s); 623 } 624 625 static void ccid_detach(USBCCIDState *s) 626 { 627 ccid_reset(s); 628 } 629 630 static void ccid_handle_reset(USBDevice *dev) 631 { 632 USBCCIDState *s = USB_CCID_DEV(dev); 633 634 DPRINTF(s, 1, "Reset\n"); 635 636 ccid_reset(s); 637 } 638 639 static const char *ccid_control_to_str(USBCCIDState *s, int request) 640 { 641 switch (request) { 642 /* generic - should be factored out if there are other debugees */ 643 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 644 return "(generic) set address"; 645 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 646 return "(generic) get descriptor"; 647 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 648 return "(generic) get configuration"; 649 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 650 return "(generic) set configuration"; 651 case DeviceRequest | USB_REQ_GET_STATUS: 652 return "(generic) get status"; 653 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 654 return "(generic) clear feature"; 655 case DeviceOutRequest | USB_REQ_SET_FEATURE: 656 return "(generic) set_feature"; 657 case InterfaceRequest | USB_REQ_GET_INTERFACE: 658 return "(generic) get interface"; 659 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 660 return "(generic) set interface"; 661 /* class requests */ 662 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 663 return "ABORT"; 664 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 665 return "GET_CLOCK_FREQUENCIES"; 666 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 667 return "GET_DATA_RATES"; 668 } 669 return "unknown"; 670 } 671 672 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 673 int value, int index, int length, uint8_t *data) 674 { 675 USBCCIDState *s = USB_CCID_DEV(dev); 676 int ret; 677 678 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 679 ccid_control_to_str(s, request), request, value); 680 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 681 if (ret >= 0) { 682 return; 683 } 684 685 switch (request) { 686 /* Class specific requests. */ 687 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 688 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 689 p->status = USB_RET_STALL; 690 break; 691 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 692 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 693 p->status = USB_RET_STALL; 694 break; 695 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 696 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 697 p->status = USB_RET_STALL; 698 break; 699 default: 700 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 701 request, value); 702 p->status = USB_RET_STALL; 703 break; 704 } 705 } 706 707 static bool ccid_card_inserted(USBCCIDState *s) 708 { 709 return s->bmSlotICCState & SLOT_0_STATE_MASK; 710 } 711 712 static uint8_t ccid_card_status(USBCCIDState *s) 713 { 714 return ccid_card_inserted(s) 715 ? (s->powered ? 716 ICC_STATUS_PRESENT_ACTIVE 717 : ICC_STATUS_PRESENT_INACTIVE 718 ) 719 : ICC_STATUS_NOT_PRESENT; 720 } 721 722 static uint8_t ccid_calc_status(USBCCIDState *s) 723 { 724 /* 725 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 726 * bmCommandStatus 727 */ 728 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 729 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 730 return ret; 731 } 732 733 static void ccid_reset_error_status(USBCCIDState *s) 734 { 735 s->bError = ERROR_CMD_NOT_SUPPORTED; 736 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 737 } 738 739 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 740 { 741 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 742 if (h == NULL) { 743 return; 744 } 745 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 746 h->b.hdr.dwLength = 0; 747 h->b.hdr.bSlot = recv->bSlot; 748 h->b.hdr.bSeq = recv->bSeq; 749 h->b.bStatus = ccid_calc_status(s); 750 h->b.bError = s->bError; 751 h->bClockStatus = CLOCK_STATUS_RUNNING; 752 ccid_reset_error_status(s); 753 usb_wakeup(s->bulk, 0); 754 } 755 756 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 757 { 758 CCID_Parameter *h; 759 uint32_t len = s->ulProtocolDataStructureSize; 760 761 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 762 if (h == NULL) { 763 return; 764 } 765 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 766 h->b.hdr.dwLength = 0; 767 h->b.hdr.bSlot = recv->bSlot; 768 h->b.hdr.bSeq = recv->bSeq; 769 h->b.bStatus = ccid_calc_status(s); 770 h->b.bError = s->bError; 771 h->bProtocolNum = s->bProtocolNum; 772 h->abProtocolDataStructure = s->abProtocolDataStructure; 773 ccid_reset_error_status(s); 774 usb_wakeup(s->bulk, 0); 775 } 776 777 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 778 const uint8_t *data, uint32_t len) 779 { 780 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 781 782 if (p == NULL) { 783 return; 784 } 785 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 786 p->b.hdr.dwLength = cpu_to_le32(len); 787 p->b.hdr.bSlot = slot; 788 p->b.hdr.bSeq = seq; 789 p->b.bStatus = ccid_calc_status(s); 790 p->b.bError = s->bError; 791 if (p->b.bError) { 792 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 793 } 794 if (len) { 795 assert(data); 796 memcpy(p->abData, data, len); 797 } 798 ccid_reset_error_status(s); 799 usb_wakeup(s->bulk, 0); 800 } 801 802 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 803 { 804 s->bmCommandStatus = COMMAND_STATUS_FAILED; 805 s->bError = error; 806 } 807 808 static void ccid_write_data_block_answer(USBCCIDState *s, 809 const uint8_t *data, uint32_t len) 810 { 811 uint8_t seq; 812 uint8_t slot; 813 814 if (!ccid_has_pending_answers(s)) { 815 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 816 ccid_report_error_failed(s, ERROR_ICC_MUTE); 817 return; 818 } 819 ccid_remove_pending_answer(s, &slot, &seq); 820 ccid_write_data_block(s, slot, seq, data, len); 821 } 822 823 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 824 { 825 int i; 826 827 if (len < 2 || !(atr[1] & 0x80)) { 828 /* too short or TD1 not included */ 829 return 0; /* T=0, default */ 830 } 831 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 832 i += !!(atr[1] & 0x80); 833 return atr[i] & 0x0f; 834 } 835 836 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 837 { 838 const uint8_t *atr = NULL; 839 uint32_t len = 0; 840 uint8_t atr_protocol_num; 841 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 842 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 843 844 if (s->card) { 845 atr = ccid_card_get_atr(s->card, &len); 846 } 847 atr_protocol_num = atr_get_protocol_num(atr, len); 848 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 849 atr_protocol_num); 850 /* set parameters from ATR - see spec page 109 */ 851 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 852 : s->bProtocolNum); 853 switch (atr_protocol_num) { 854 case 0: 855 /* TODO: unimplemented ATR T0 parameters */ 856 t0->bmFindexDindex = 0; 857 t0->bmTCCKST0 = 0; 858 t0->bGuardTimeT0 = 0; 859 t0->bWaitingIntegerT0 = 0; 860 t0->bClockStop = 0; 861 break; 862 case 1: 863 /* TODO: unimplemented ATR T1 parameters */ 864 t1->bmFindexDindex = 0; 865 t1->bmTCCKST1 = 0; 866 t1->bGuardTimeT1 = 0; 867 t1->bWaitingIntegerT1 = 0; 868 t1->bClockStop = 0; 869 t1->bIFSC = 0; 870 t1->bNadValue = 0; 871 break; 872 default: 873 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 874 __func__, atr_protocol_num); 875 } 876 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 877 } 878 879 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 880 { 881 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 882 uint32_t protocol_num = ph->bProtocolNum & 3; 883 884 if (protocol_num != 0 && protocol_num != 1) { 885 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 886 return; 887 } 888 s->bProtocolNum = protocol_num; 889 s->abProtocolDataStructure = ph->abProtocolDataStructure; 890 } 891 892 /* 893 * must be 5 bytes for T=0, 7 bytes for T=1 894 * See page 52 895 */ 896 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 897 .t1 = { 898 .bmFindexDindex = 0x77, 899 .bmTCCKST1 = 0x00, 900 .bGuardTimeT1 = 0x00, 901 .bWaitingIntegerT1 = 0x00, 902 .bClockStop = 0x00, 903 .bIFSC = 0xfe, 904 .bNadValue = 0x00, 905 } 906 }; 907 908 static void ccid_reset_parameters(USBCCIDState *s) 909 { 910 s->bProtocolNum = 0; /* T=0 */ 911 s->abProtocolDataStructure = defaultProtocolDataStructure; 912 } 913 914 /* NOTE: only a single slot is supported (SLOT_0) */ 915 static void ccid_on_slot_change(USBCCIDState *s, bool full) 916 { 917 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 918 uint8_t current = s->bmSlotICCState; 919 if (full) { 920 s->bmSlotICCState |= SLOT_0_STATE_MASK; 921 } else { 922 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 923 } 924 if (current != s->bmSlotICCState) { 925 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 926 } 927 s->notify_slot_change = true; 928 usb_wakeup(s->intr, 0); 929 } 930 931 static void ccid_write_data_block_error( 932 USBCCIDState *s, uint8_t slot, uint8_t seq) 933 { 934 ccid_write_data_block(s, slot, seq, NULL, 0); 935 } 936 937 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 938 { 939 uint32_t len; 940 941 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 942 DPRINTF(s, 1, 943 "usb-ccid: not sending apdu to client, no card connected\n"); 944 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 945 return; 946 } 947 len = le32_to_cpu(recv->hdr.dwLength); 948 DPRINTF(s, 1, "%s: seq %d, len %u\n", __func__, 949 recv->hdr.bSeq, len); 950 ccid_add_pending_answer(s, (CCID_Header *)recv); 951 if (s->card && len <= BULK_OUT_DATA_SIZE) { 952 ccid_card_apdu_from_guest(s->card, recv->abData, len); 953 } else { 954 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 955 } 956 } 957 958 static const char *ccid_message_type_to_str(uint8_t type) 959 { 960 switch (type) { 961 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 962 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 963 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 964 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 965 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 966 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 967 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 968 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 969 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 970 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 971 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 972 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 973 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 974 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 975 return "SetDataRateAndClockFrequency"; 976 } 977 return "unknown"; 978 } 979 980 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 981 { 982 CCID_Header *ccid_header; 983 984 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 985 goto err; 986 } 987 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 988 s->bulk_out_pos += p->iov.size; 989 if (s->bulk_out_pos < 10) { 990 DPRINTF(s, 1, "%s: header incomplete\n", __func__); 991 goto err; 992 } 993 994 ccid_header = (CCID_Header *)s->bulk_out_data; 995 if ((s->bulk_out_pos - 10 < ccid_header->dwLength) && 996 (p->iov.size == CCID_MAX_PACKET_SIZE)) { 997 DPRINTF(s, D_VERBOSE, 998 "usb-ccid: bulk_in: expecting more packets (%u/%u)\n", 999 s->bulk_out_pos - 10, ccid_header->dwLength); 1000 return; 1001 } 1002 if (s->bulk_out_pos - 10 != ccid_header->dwLength) { 1003 DPRINTF(s, 1, 1004 "usb-ccid: bulk_in: message size mismatch (got %u, expected %u)\n", 1005 s->bulk_out_pos - 10, ccid_header->dwLength); 1006 goto err; 1007 } 1008 1009 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1010 ccid_header->bMessageType, 1011 ccid_message_type_to_str(ccid_header->bMessageType)); 1012 switch (ccid_header->bMessageType) { 1013 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1014 ccid_write_slot_status(s, ccid_header); 1015 break; 1016 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1017 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1018 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1019 s->powered = true; 1020 if (!ccid_card_inserted(s)) { 1021 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1022 } 1023 /* atr is written regardless of error. */ 1024 ccid_write_data_block_atr(s, ccid_header); 1025 break; 1026 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1027 ccid_reset_error_status(s); 1028 s->powered = false; 1029 ccid_write_slot_status(s, ccid_header); 1030 break; 1031 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1032 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1033 break; 1034 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1035 ccid_reset_error_status(s); 1036 ccid_set_parameters(s, ccid_header); 1037 ccid_write_parameters(s, ccid_header); 1038 break; 1039 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1040 ccid_reset_error_status(s); 1041 ccid_reset_parameters(s); 1042 ccid_write_parameters(s, ccid_header); 1043 break; 1044 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1045 ccid_reset_error_status(s); 1046 ccid_write_parameters(s, ccid_header); 1047 break; 1048 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1049 ccid_report_error_failed(s, 0); 1050 ccid_write_slot_status(s, ccid_header); 1051 break; 1052 default: 1053 DPRINTF(s, 1, 1054 "handle_data: ERROR: unhandled message type %Xh\n", 1055 ccid_header->bMessageType); 1056 /* 1057 * The caller is expecting the device to respond, tell it we 1058 * don't support the operation. 1059 */ 1060 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1061 ccid_write_slot_status(s, ccid_header); 1062 break; 1063 } 1064 s->bulk_out_pos = 0; 1065 return; 1066 1067 err: 1068 p->status = USB_RET_STALL; 1069 s->bulk_out_pos = 0; 1070 return; 1071 } 1072 1073 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p, 1074 unsigned int max_packet_size) 1075 { 1076 int len = 0; 1077 1078 ccid_bulk_in_get(s); 1079 if (s->current_bulk_in != NULL) { 1080 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1081 p->iov.size); 1082 if (len) { 1083 usb_packet_copy(p, s->current_bulk_in->data + 1084 s->current_bulk_in->pos, len); 1085 } 1086 s->current_bulk_in->pos += len; 1087 if (s->current_bulk_in->pos == s->current_bulk_in->len 1088 && len != max_packet_size) { 1089 ccid_bulk_in_release(s); 1090 } 1091 } else { 1092 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1093 p->status = USB_RET_NAK; 1094 } 1095 if (len) { 1096 DPRINTF(s, D_MORE_INFO, 1097 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1098 __func__, p->iov.size, len); 1099 } 1100 if (len < p->iov.size) { 1101 DPRINTF(s, 1, 1102 "%s: returning short (EREMOTEIO) %d < %zd\n", 1103 __func__, len, p->iov.size); 1104 } 1105 } 1106 1107 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1108 { 1109 USBCCIDState *s = USB_CCID_DEV(dev); 1110 uint8_t buf[2]; 1111 1112 switch (p->pid) { 1113 case USB_TOKEN_OUT: 1114 ccid_handle_bulk_out(s, p); 1115 break; 1116 1117 case USB_TOKEN_IN: 1118 switch (p->ep->nr) { 1119 case CCID_BULK_IN_EP: 1120 ccid_bulk_in_copy_to_guest(s, p, dev->ep_ctl.max_packet_size); 1121 break; 1122 case CCID_INT_IN_EP: 1123 if (s->notify_slot_change) { 1124 /* page 56, RDR_to_PC_NotifySlotChange */ 1125 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1126 buf[1] = s->bmSlotICCState; 1127 usb_packet_copy(p, buf, 2); 1128 s->notify_slot_change = false; 1129 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1130 DPRINTF(s, D_INFO, 1131 "handle_data: int_in: notify_slot_change %X, " 1132 "requested len %zd\n", 1133 s->bmSlotICCState, p->iov.size); 1134 } else { 1135 p->status = USB_RET_NAK; 1136 } 1137 break; 1138 default: 1139 DPRINTF(s, 1, "Bad endpoint\n"); 1140 p->status = USB_RET_STALL; 1141 break; 1142 } 1143 break; 1144 default: 1145 DPRINTF(s, 1, "Bad token\n"); 1146 p->status = USB_RET_STALL; 1147 break; 1148 } 1149 } 1150 1151 static void ccid_unrealize(USBDevice *dev) 1152 { 1153 USBCCIDState *s = USB_CCID_DEV(dev); 1154 1155 ccid_bulk_in_clear(s); 1156 } 1157 1158 static void ccid_flush_pending_answers(USBCCIDState *s) 1159 { 1160 while (ccid_has_pending_answers(s)) { 1161 ccid_write_data_block_answer(s, NULL, 0); 1162 } 1163 } 1164 1165 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1166 { 1167 return s->pending_answers_num == 0 1168 ? NULL 1169 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1170 } 1171 1172 static Property ccid_props[] = { 1173 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1174 DEFINE_PROP_END_OF_LIST(), 1175 }; 1176 1177 #define TYPE_CCID_BUS "ccid-bus" 1178 OBJECT_DECLARE_SIMPLE_TYPE(CCIDBus, CCID_BUS) 1179 1180 static const TypeInfo ccid_bus_info = { 1181 .name = TYPE_CCID_BUS, 1182 .parent = TYPE_BUS, 1183 .instance_size = sizeof(CCIDBus), 1184 }; 1185 1186 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1187 uint8_t *apdu, uint32_t len) 1188 { 1189 DeviceState *qdev = DEVICE(card); 1190 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1191 USBCCIDState *s = USB_CCID_DEV(dev); 1192 Answer *answer; 1193 1194 if (!ccid_has_pending_answers(s)) { 1195 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1196 return; 1197 } 1198 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1199 answer = ccid_peek_next_answer(s); 1200 if (answer == NULL) { 1201 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1202 ccid_report_error_failed(s, ERROR_HW_ERROR); 1203 return; 1204 } 1205 DPRINTF(s, 1, "APDU returned to guest %u (answer seq %d, slot %d)\n", 1206 len, answer->seq, answer->slot); 1207 ccid_write_data_block_answer(s, apdu, len); 1208 } 1209 1210 void ccid_card_card_removed(CCIDCardState *card) 1211 { 1212 DeviceState *qdev = DEVICE(card); 1213 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1214 USBCCIDState *s = USB_CCID_DEV(dev); 1215 1216 ccid_on_slot_change(s, false); 1217 ccid_flush_pending_answers(s); 1218 ccid_reset(s); 1219 } 1220 1221 int ccid_card_ccid_attach(CCIDCardState *card) 1222 { 1223 DeviceState *qdev = DEVICE(card); 1224 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1225 USBCCIDState *s = USB_CCID_DEV(dev); 1226 1227 DPRINTF(s, 1, "CCID Attach\n"); 1228 return 0; 1229 } 1230 1231 void ccid_card_ccid_detach(CCIDCardState *card) 1232 { 1233 DeviceState *qdev = DEVICE(card); 1234 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1235 USBCCIDState *s = USB_CCID_DEV(dev); 1236 1237 DPRINTF(s, 1, "CCID Detach\n"); 1238 if (ccid_card_inserted(s)) { 1239 ccid_on_slot_change(s, false); 1240 } 1241 ccid_detach(s); 1242 } 1243 1244 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1245 { 1246 DeviceState *qdev = DEVICE(card); 1247 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1248 USBCCIDState *s = USB_CCID_DEV(dev); 1249 1250 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1251 s->last_answer_error = error; 1252 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1253 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1254 /* 1255 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1256 * so check that first to not trigger abort 1257 */ 1258 if (ccid_has_pending_answers(s)) { 1259 ccid_write_data_block_answer(s, NULL, 0); 1260 } 1261 } 1262 1263 void ccid_card_card_inserted(CCIDCardState *card) 1264 { 1265 DeviceState *qdev = DEVICE(card); 1266 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1267 USBCCIDState *s = USB_CCID_DEV(dev); 1268 1269 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1270 ccid_flush_pending_answers(s); 1271 ccid_on_slot_change(s, true); 1272 } 1273 1274 static void ccid_card_unrealize(DeviceState *qdev) 1275 { 1276 CCIDCardState *card = CCID_CARD(qdev); 1277 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1278 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1279 USBCCIDState *s = USB_CCID_DEV(dev); 1280 1281 if (ccid_card_inserted(s)) { 1282 ccid_card_card_removed(card); 1283 } 1284 if (cc->unrealize) { 1285 cc->unrealize(card); 1286 } 1287 s->card = NULL; 1288 } 1289 1290 static void ccid_card_realize(DeviceState *qdev, Error **errp) 1291 { 1292 CCIDCardState *card = CCID_CARD(qdev); 1293 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1294 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1295 USBCCIDState *s = USB_CCID_DEV(dev); 1296 Error *local_err = NULL; 1297 1298 if (card->slot != 0) { 1299 error_setg(errp, "usb-ccid supports one slot, can't add %d", 1300 card->slot); 1301 return; 1302 } 1303 if (s->card != NULL) { 1304 error_setg(errp, "usb-ccid card already full, not adding"); 1305 return; 1306 } 1307 if (cc->realize) { 1308 cc->realize(card, &local_err); 1309 if (local_err != NULL) { 1310 error_propagate(errp, local_err); 1311 return; 1312 } 1313 } 1314 s->card = card; 1315 } 1316 1317 static void ccid_realize(USBDevice *dev, Error **errp) 1318 { 1319 USBCCIDState *s = USB_CCID_DEV(dev); 1320 1321 usb_desc_create_serial(dev); 1322 usb_desc_init(dev); 1323 qbus_init(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), NULL); 1324 qbus_set_hotplug_handler(BUS(&s->bus), OBJECT(dev)); 1325 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1326 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1327 s->card = NULL; 1328 s->dev.speed = USB_SPEED_FULL; 1329 s->dev.speedmask = USB_SPEED_MASK_FULL; 1330 s->notify_slot_change = false; 1331 s->powered = true; 1332 s->pending_answers_num = 0; 1333 s->last_answer_error = 0; 1334 s->bulk_in_pending_start = 0; 1335 s->bulk_in_pending_end = 0; 1336 s->current_bulk_in = NULL; 1337 ccid_reset_error_status(s); 1338 s->bulk_out_pos = 0; 1339 ccid_reset_parameters(s); 1340 ccid_reset(s); 1341 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1342 } 1343 1344 static int ccid_post_load(void *opaque, int version_id) 1345 { 1346 USBCCIDState *s = opaque; 1347 1348 /* 1349 * This must be done after usb_device_attach, which sets state to ATTACHED, 1350 * while it must be DEFAULT in order to accept packets (like it is after 1351 * reset, but reset will reset our addr and call our reset handler which 1352 * may change state, and we don't want to do that when migrating). 1353 */ 1354 s->dev.state = s->state_vmstate; 1355 return 0; 1356 } 1357 1358 static int ccid_pre_save(void *opaque) 1359 { 1360 USBCCIDState *s = opaque; 1361 1362 s->state_vmstate = s->dev.state; 1363 1364 return 0; 1365 } 1366 1367 static const VMStateDescription bulk_in_vmstate = { 1368 .name = "CCID BulkIn state", 1369 .version_id = 1, 1370 .minimum_version_id = 1, 1371 .fields = (VMStateField[]) { 1372 VMSTATE_BUFFER(data, BulkIn), 1373 VMSTATE_UINT32(len, BulkIn), 1374 VMSTATE_UINT32(pos, BulkIn), 1375 VMSTATE_END_OF_LIST() 1376 } 1377 }; 1378 1379 static const VMStateDescription answer_vmstate = { 1380 .name = "CCID Answer state", 1381 .version_id = 1, 1382 .minimum_version_id = 1, 1383 .fields = (VMStateField[]) { 1384 VMSTATE_UINT8(slot, Answer), 1385 VMSTATE_UINT8(seq, Answer), 1386 VMSTATE_END_OF_LIST() 1387 } 1388 }; 1389 1390 static const VMStateDescription usb_device_vmstate = { 1391 .name = "usb_device", 1392 .version_id = 1, 1393 .minimum_version_id = 1, 1394 .fields = (VMStateField[]) { 1395 VMSTATE_UINT8(addr, USBDevice), 1396 VMSTATE_BUFFER(setup_buf, USBDevice), 1397 VMSTATE_BUFFER(data_buf, USBDevice), 1398 VMSTATE_END_OF_LIST() 1399 } 1400 }; 1401 1402 static const VMStateDescription ccid_vmstate = { 1403 .name = "usb-ccid", 1404 .version_id = 1, 1405 .minimum_version_id = 1, 1406 .post_load = ccid_post_load, 1407 .pre_save = ccid_pre_save, 1408 .fields = (VMStateField[]) { 1409 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1410 VMSTATE_UINT8(debug, USBCCIDState), 1411 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1412 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1413 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1414 VMSTATE_UINT8(powered, USBCCIDState), 1415 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1416 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1417 VMSTATE_UINT8(bError, USBCCIDState), 1418 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1419 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1420 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1421 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1422 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1423 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1424 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1425 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1426 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1427 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1428 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1429 VMSTATE_UNUSED(1), /* was migration_state */ 1430 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1431 VMSTATE_END_OF_LIST() 1432 } 1433 }; 1434 1435 static Property ccid_properties[] = { 1436 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1437 DEFINE_PROP_END_OF_LIST(), 1438 }; 1439 1440 static void ccid_class_initfn(ObjectClass *klass, void *data) 1441 { 1442 DeviceClass *dc = DEVICE_CLASS(klass); 1443 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1444 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1445 1446 uc->realize = ccid_realize; 1447 uc->product_desc = "QEMU USB CCID"; 1448 uc->usb_desc = &desc_ccid; 1449 uc->handle_reset = ccid_handle_reset; 1450 uc->handle_control = ccid_handle_control; 1451 uc->handle_data = ccid_handle_data; 1452 uc->unrealize = ccid_unrealize; 1453 dc->desc = "CCID Rev 1.1 smartcard reader"; 1454 dc->vmsd = &ccid_vmstate; 1455 device_class_set_props(dc, ccid_properties); 1456 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1457 hc->unplug = qdev_simple_device_unplug_cb; 1458 } 1459 1460 static const TypeInfo ccid_info = { 1461 .name = TYPE_USB_CCID_DEV, 1462 .parent = TYPE_USB_DEVICE, 1463 .instance_size = sizeof(USBCCIDState), 1464 .class_init = ccid_class_initfn, 1465 .interfaces = (InterfaceInfo[]) { 1466 { TYPE_HOTPLUG_HANDLER }, 1467 { } 1468 } 1469 }; 1470 1471 static void ccid_card_class_init(ObjectClass *klass, void *data) 1472 { 1473 DeviceClass *k = DEVICE_CLASS(klass); 1474 k->bus_type = TYPE_CCID_BUS; 1475 k->realize = ccid_card_realize; 1476 k->unrealize = ccid_card_unrealize; 1477 device_class_set_props(k, ccid_props); 1478 } 1479 1480 static const TypeInfo ccid_card_type_info = { 1481 .name = TYPE_CCID_CARD, 1482 .parent = TYPE_DEVICE, 1483 .instance_size = sizeof(CCIDCardState), 1484 .abstract = true, 1485 .class_size = sizeof(CCIDCardClass), 1486 .class_init = ccid_card_class_init, 1487 }; 1488 1489 static void ccid_register_types(void) 1490 { 1491 type_register_static(&ccid_bus_info); 1492 type_register_static(&ccid_card_type_info); 1493 type_register_static(&ccid_info); 1494 } 1495 1496 type_init(ccid_register_types) 1497