1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu-common.h" 38 #include "qemu/error-report.h" 39 #include "hw/usb.h" 40 #include "hw/usb/desc.h" 41 #include "monitor/monitor.h" 42 43 #include "ccid.h" 44 45 #define DPRINTF(s, lvl, fmt, ...) \ 46 do { \ 47 if (lvl <= s->debug) { \ 48 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 49 } \ 50 } while (0) 51 52 #define D_WARN 1 53 #define D_INFO 2 54 #define D_MORE_INFO 3 55 #define D_VERBOSE 4 56 57 #define CCID_DEV_NAME "usb-ccid" 58 59 /* 60 * The two options for variable sized buffers: 61 * make them constant size, for large enough constant, 62 * or handle the migration complexity - VMState doesn't handle this case. 63 * sizes are expected never to be exceeded, unless guest misbehaves. 64 */ 65 #define BULK_OUT_DATA_SIZE 65536 66 #define PENDING_ANSWERS_NUM 128 67 68 #define BULK_IN_BUF_SIZE 384 69 #define BULK_IN_PENDING_NUM 8 70 71 #define CCID_MAX_PACKET_SIZE 64 72 73 #define CCID_CONTROL_ABORT 0x1 74 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 75 #define CCID_CONTROL_GET_DATA_RATES 0x3 76 77 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 78 #define CCID_VENDOR_DESCRIPTION "QEMU" 79 #define CCID_INTERFACE_NAME "CCID Interface" 80 #define CCID_SERIAL_NUMBER_STRING "1" 81 /* 82 * Using Gemplus Vendor and Product id 83 * Effect on various drivers: 84 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 85 * linux has a number of class drivers, but openct filters based on 86 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 87 */ 88 #define CCID_VENDOR_ID 0x08e6 89 #define CCID_PRODUCT_ID 0x4433 90 #define CCID_DEVICE_VERSION 0x0000 91 92 /* 93 * BULK_OUT messages from PC to Reader 94 * Defined in CCID Rev 1.1 6.1 (page 26) 95 */ 96 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 97 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 98 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 99 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 100 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 110 111 /* 112 * BULK_IN messages from Reader to PC 113 * Defined in CCID Rev 1.1 6.2 (page 48) 114 */ 115 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 116 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 117 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 118 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 119 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 120 121 /* 122 * INTERRUPT_IN messages from Reader to PC 123 * Defined in CCID Rev 1.1 6.3 (page 56) 124 */ 125 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 126 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 127 128 /* 129 * Endpoints for CCID - addresses are up to us to decide. 130 * To support slot insertion and removal we must have an interrupt in ep 131 * in addition we need a bulk in and bulk out ep 132 * 5.2, page 20 133 */ 134 #define CCID_INT_IN_EP 1 135 #define CCID_BULK_IN_EP 2 136 #define CCID_BULK_OUT_EP 3 137 138 /* bmSlotICCState masks */ 139 #define SLOT_0_STATE_MASK 1 140 #define SLOT_0_CHANGED_MASK 2 141 142 /* Status codes that go in bStatus (see 6.2.6) */ 143 enum { 144 ICC_STATUS_PRESENT_ACTIVE = 0, 145 ICC_STATUS_PRESENT_INACTIVE, 146 ICC_STATUS_NOT_PRESENT 147 }; 148 149 enum { 150 COMMAND_STATUS_NO_ERROR = 0, 151 COMMAND_STATUS_FAILED, 152 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 153 }; 154 155 /* Error codes that go in bError (see 6.2.6) */ 156 enum { 157 ERROR_CMD_NOT_SUPPORTED = 0, 158 ERROR_CMD_ABORTED = -1, 159 ERROR_ICC_MUTE = -2, 160 ERROR_XFR_PARITY_ERROR = -3, 161 ERROR_XFR_OVERRUN = -4, 162 ERROR_HW_ERROR = -5, 163 }; 164 165 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 166 enum { 167 CLOCK_STATUS_RUNNING = 0, 168 /* 169 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 170 * 3 - unknown state. rest are RFU 171 */ 172 }; 173 174 typedef struct QEMU_PACKED CCID_Header { 175 uint8_t bMessageType; 176 uint32_t dwLength; 177 uint8_t bSlot; 178 uint8_t bSeq; 179 } CCID_Header; 180 181 typedef struct QEMU_PACKED CCID_BULK_IN { 182 CCID_Header hdr; 183 uint8_t bStatus; /* Only used in BULK_IN */ 184 uint8_t bError; /* Only used in BULK_IN */ 185 } CCID_BULK_IN; 186 187 typedef struct QEMU_PACKED CCID_SlotStatus { 188 CCID_BULK_IN b; 189 uint8_t bClockStatus; 190 } CCID_SlotStatus; 191 192 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 193 uint8_t bmFindexDindex; 194 uint8_t bmTCCKST0; 195 uint8_t bGuardTimeT0; 196 uint8_t bWaitingIntegerT0; 197 uint8_t bClockStop; 198 } CCID_T0ProtocolDataStructure; 199 200 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 201 uint8_t bmFindexDindex; 202 uint8_t bmTCCKST1; 203 uint8_t bGuardTimeT1; 204 uint8_t bWaitingIntegerT1; 205 uint8_t bClockStop; 206 uint8_t bIFSC; 207 uint8_t bNadValue; 208 } CCID_T1ProtocolDataStructure; 209 210 typedef union CCID_ProtocolDataStructure { 211 CCID_T0ProtocolDataStructure t0; 212 CCID_T1ProtocolDataStructure t1; 213 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 214 } CCID_ProtocolDataStructure; 215 216 typedef struct QEMU_PACKED CCID_Parameter { 217 CCID_BULK_IN b; 218 uint8_t bProtocolNum; 219 CCID_ProtocolDataStructure abProtocolDataStructure; 220 } CCID_Parameter; 221 222 typedef struct QEMU_PACKED CCID_DataBlock { 223 CCID_BULK_IN b; 224 uint8_t bChainParameter; 225 uint8_t abData[0]; 226 } CCID_DataBlock; 227 228 /* 6.1.4 PC_to_RDR_XfrBlock */ 229 typedef struct QEMU_PACKED CCID_XferBlock { 230 CCID_Header hdr; 231 uint8_t bBWI; /* Block Waiting Timeout */ 232 uint16_t wLevelParameter; /* XXX currently unused */ 233 uint8_t abData[0]; 234 } CCID_XferBlock; 235 236 typedef struct QEMU_PACKED CCID_IccPowerOn { 237 CCID_Header hdr; 238 uint8_t bPowerSelect; 239 uint16_t abRFU; 240 } CCID_IccPowerOn; 241 242 typedef struct QEMU_PACKED CCID_IccPowerOff { 243 CCID_Header hdr; 244 uint16_t abRFU; 245 } CCID_IccPowerOff; 246 247 typedef struct QEMU_PACKED CCID_SetParameters { 248 CCID_Header hdr; 249 uint8_t bProtocolNum; 250 uint16_t abRFU; 251 CCID_ProtocolDataStructure abProtocolDataStructure; 252 } CCID_SetParameters; 253 254 typedef struct CCID_Notify_Slot_Change { 255 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 256 uint8_t bmSlotICCState; 257 } CCID_Notify_Slot_Change; 258 259 /* used for DataBlock response to XferBlock */ 260 typedef struct Answer { 261 uint8_t slot; 262 uint8_t seq; 263 } Answer; 264 265 /* pending BULK_IN messages */ 266 typedef struct BulkIn { 267 uint8_t data[BULK_IN_BUF_SIZE]; 268 uint32_t len; 269 uint32_t pos; 270 } BulkIn; 271 272 enum { 273 MIGRATION_NONE, 274 MIGRATION_MIGRATED, 275 }; 276 277 typedef struct CCIDBus { 278 BusState qbus; 279 } CCIDBus; 280 281 /* 282 * powered - defaults to true, changed by PowerOn/PowerOff messages 283 */ 284 typedef struct USBCCIDState { 285 USBDevice dev; 286 USBEndpoint *intr; 287 CCIDBus bus; 288 CCIDCardState *card; 289 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 290 uint32_t bulk_in_pending_start; 291 uint32_t bulk_in_pending_end; /* first free */ 292 uint32_t bulk_in_pending_num; 293 BulkIn *current_bulk_in; 294 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 295 uint32_t bulk_out_pos; 296 uint64_t last_answer_error; 297 Answer pending_answers[PENDING_ANSWERS_NUM]; 298 uint32_t pending_answers_start; 299 uint32_t pending_answers_end; 300 uint32_t pending_answers_num; 301 uint8_t bError; 302 uint8_t bmCommandStatus; 303 uint8_t bProtocolNum; 304 CCID_ProtocolDataStructure abProtocolDataStructure; 305 uint32_t ulProtocolDataStructureSize; 306 uint32_t state_vmstate; 307 uint32_t migration_target_ip; 308 uint16_t migration_target_port; 309 uint8_t migration_state; 310 uint8_t bmSlotICCState; 311 uint8_t powered; 312 uint8_t notify_slot_change; 313 uint8_t debug; 314 } USBCCIDState; 315 316 /* 317 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 318 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 319 * Specification. 320 * 321 * This device implemented based on the spec and with an Athena Smart Card 322 * Reader as reference: 323 * 0dc3:1004 Athena Smartcard Solutions, Inc. 324 */ 325 326 static const uint8_t qemu_ccid_descriptor[] = { 327 /* Smart Card Device Class Descriptor */ 328 0x36, /* u8 bLength; */ 329 0x21, /* u8 bDescriptorType; Functional */ 330 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 331 0x00, /* 332 * u8 bMaxSlotIndex; The index of the highest available 333 * slot on this device. All slots are consecutive starting 334 * at 00h. 335 */ 336 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 337 338 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 339 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 340 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 341 0xa0, 0x0f, 0x00, 0x00, 342 /* u32 dwMaximumClock; */ 343 0x00, 0x00, 0x01, 0x00, 344 0x00, /* u8 bNumClockSupported; * 345 * 0 means just the default and max. */ 346 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 347 0x80, 0x25, 0x00, 0x00, 348 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 349 0x00, 0xC2, 0x01, 0x00, 350 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 351 * default and max */ 352 /* u32 dwMaxIFSD; * 353 * maximum IFSD supported by CCID for protocol * 354 * T=1 (Maximum seen from various cards) */ 355 0xfe, 0x00, 0x00, 0x00, 356 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 357 0x00, 0x00, 0x00, 0x00, 358 /* u32 dwMechanical; 0 - no special characteristics. */ 359 0x00, 0x00, 0x00, 0x00, 360 /* 361 * u32 dwFeatures; 362 * 0 - No special characteristics 363 * + 2 Automatic parameter configuration based on ATR data 364 * + 4 Automatic activation of ICC on inserting 365 * + 8 Automatic ICC voltage selection 366 * + 10 Automatic ICC clock frequency change 367 * + 20 Automatic baud rate change 368 * + 40 Automatic parameters negotiation made by the CCID 369 * + 80 automatic PPS made by the CCID 370 * 100 CCID can set ICC in clock stop mode 371 * 200 NAD value other then 00 accepted (T=1 protocol) 372 * + 400 Automatic IFSD exchange as first exchange (T=1) 373 * One of the following only: 374 * + 10000 TPDU level exchanges with CCID 375 * 20000 Short APDU level exchange with CCID 376 * 40000 Short and Extended APDU level exchange with CCID 377 * 378 * 100000 USB Wake up signaling supported on card 379 * insertion and removal. Must set bit 5 in bmAttributes 380 * in Configuration descriptor if 100000 is set. 381 */ 382 0xfe, 0x04, 0x01, 0x00, 383 /* 384 * u32 dwMaxCCIDMessageLength; For extended APDU in 385 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 386 * wMaxPacketSize of the Bulk-OUT endpoint 387 */ 388 0x12, 0x00, 0x01, 0x00, 389 0xFF, /* 390 * u8 bClassGetResponse; Significant only for CCID that 391 * offers an APDU level for exchanges. Indicates the 392 * default class value used by the CCID when it sends a 393 * Get Response command to perform the transportation of 394 * an APDU by T=0 protocol 395 * FFh indicates that the CCID echos the class of the APDU. 396 */ 397 0xFF, /* 398 * u8 bClassEnvelope; EAPDU only. Envelope command for 399 * T=0 400 */ 401 0x00, 0x00, /* 402 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 403 * line for LCD display used for PIN entry. 0000 - no LCD 404 */ 405 0x01, /* 406 * u8 bPINSupport; 01h PIN Verification, 407 * 02h PIN Modification 408 */ 409 0x01, /* u8 bMaxCCIDBusySlots; */ 410 }; 411 412 enum { 413 STR_MANUFACTURER = 1, 414 STR_PRODUCT, 415 STR_SERIALNUMBER, 416 STR_INTERFACE, 417 }; 418 419 static const USBDescStrings desc_strings = { 420 [STR_MANUFACTURER] = "QEMU", 421 [STR_PRODUCT] = "QEMU USB CCID", 422 [STR_SERIALNUMBER] = "1", 423 [STR_INTERFACE] = "CCID Interface", 424 }; 425 426 static const USBDescIface desc_iface0 = { 427 .bInterfaceNumber = 0, 428 .bNumEndpoints = 3, 429 .bInterfaceClass = USB_CLASS_CSCID, 430 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 431 .bInterfaceProtocol = 0x00, 432 .iInterface = STR_INTERFACE, 433 .ndesc = 1, 434 .descs = (USBDescOther[]) { 435 { 436 /* smartcard descriptor */ 437 .data = qemu_ccid_descriptor, 438 }, 439 }, 440 .eps = (USBDescEndpoint[]) { 441 { 442 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 443 .bmAttributes = USB_ENDPOINT_XFER_INT, 444 .bInterval = 255, 445 .wMaxPacketSize = 64, 446 },{ 447 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 448 .bmAttributes = USB_ENDPOINT_XFER_BULK, 449 .wMaxPacketSize = 64, 450 },{ 451 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 452 .bmAttributes = USB_ENDPOINT_XFER_BULK, 453 .wMaxPacketSize = 64, 454 }, 455 } 456 }; 457 458 static const USBDescDevice desc_device = { 459 .bcdUSB = 0x0110, 460 .bMaxPacketSize0 = 64, 461 .bNumConfigurations = 1, 462 .confs = (USBDescConfig[]) { 463 { 464 .bNumInterfaces = 1, 465 .bConfigurationValue = 1, 466 .bmAttributes = 0xe0, 467 .bMaxPower = 50, 468 .nif = 1, 469 .ifs = &desc_iface0, 470 }, 471 }, 472 }; 473 474 static const USBDesc desc_ccid = { 475 .id = { 476 .idVendor = CCID_VENDOR_ID, 477 .idProduct = CCID_PRODUCT_ID, 478 .bcdDevice = CCID_DEVICE_VERSION, 479 .iManufacturer = STR_MANUFACTURER, 480 .iProduct = STR_PRODUCT, 481 .iSerialNumber = STR_SERIALNUMBER, 482 }, 483 .full = &desc_device, 484 .str = desc_strings, 485 }; 486 487 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 488 { 489 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 490 491 if (cc->get_atr) { 492 return cc->get_atr(card, len); 493 } 494 return NULL; 495 } 496 497 static void ccid_card_apdu_from_guest(CCIDCardState *card, 498 const uint8_t *apdu, 499 uint32_t len) 500 { 501 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 502 503 if (cc->apdu_from_guest) { 504 cc->apdu_from_guest(card, apdu, len); 505 } 506 } 507 508 static int ccid_card_exitfn(CCIDCardState *card) 509 { 510 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 511 512 if (cc->exitfn) { 513 return cc->exitfn(card); 514 } 515 return 0; 516 } 517 518 static int ccid_card_initfn(CCIDCardState *card) 519 { 520 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 521 522 if (cc->initfn) { 523 return cc->initfn(card); 524 } 525 return 0; 526 } 527 528 static bool ccid_has_pending_answers(USBCCIDState *s) 529 { 530 return s->pending_answers_num > 0; 531 } 532 533 static void ccid_clear_pending_answers(USBCCIDState *s) 534 { 535 s->pending_answers_num = 0; 536 s->pending_answers_start = 0; 537 s->pending_answers_end = 0; 538 } 539 540 static void ccid_print_pending_answers(USBCCIDState *s) 541 { 542 Answer *answer; 543 int i, count; 544 545 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 546 if (!ccid_has_pending_answers(s)) { 547 DPRINTF(s, D_VERBOSE, " empty\n"); 548 return; 549 } 550 for (i = s->pending_answers_start, count = s->pending_answers_num ; 551 count > 0; count--, i++) { 552 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 553 if (count == 1) { 554 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 555 } else { 556 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 557 } 558 } 559 } 560 561 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 562 { 563 Answer *answer; 564 565 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 566 s->pending_answers_num++; 567 answer = 568 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 569 answer->slot = hdr->bSlot; 570 answer->seq = hdr->bSeq; 571 ccid_print_pending_answers(s); 572 } 573 574 static void ccid_remove_pending_answer(USBCCIDState *s, 575 uint8_t *slot, uint8_t *seq) 576 { 577 Answer *answer; 578 579 assert(s->pending_answers_num > 0); 580 s->pending_answers_num--; 581 answer = 582 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 583 *slot = answer->slot; 584 *seq = answer->seq; 585 ccid_print_pending_answers(s); 586 } 587 588 static void ccid_bulk_in_clear(USBCCIDState *s) 589 { 590 s->bulk_in_pending_start = 0; 591 s->bulk_in_pending_end = 0; 592 s->bulk_in_pending_num = 0; 593 } 594 595 static void ccid_bulk_in_release(USBCCIDState *s) 596 { 597 assert(s->current_bulk_in != NULL); 598 s->current_bulk_in->pos = 0; 599 s->current_bulk_in = NULL; 600 } 601 602 static void ccid_bulk_in_get(USBCCIDState *s) 603 { 604 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 605 return; 606 } 607 assert(s->bulk_in_pending_num > 0); 608 s->bulk_in_pending_num--; 609 s->current_bulk_in = 610 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 611 } 612 613 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 614 { 615 BulkIn *bulk_in; 616 617 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 618 619 /* look for an existing element */ 620 if (len > BULK_IN_BUF_SIZE) { 621 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 622 "discarding message.\n", 623 __func__, len, BULK_IN_BUF_SIZE); 624 return NULL; 625 } 626 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 627 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 628 "discarding message.\n", __func__); 629 return NULL; 630 } 631 bulk_in = 632 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 633 s->bulk_in_pending_num++; 634 bulk_in->len = len; 635 return bulk_in->data; 636 } 637 638 static void ccid_reset(USBCCIDState *s) 639 { 640 ccid_bulk_in_clear(s); 641 ccid_clear_pending_answers(s); 642 } 643 644 static void ccid_detach(USBCCIDState *s) 645 { 646 ccid_reset(s); 647 } 648 649 static void ccid_handle_reset(USBDevice *dev) 650 { 651 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); 652 653 DPRINTF(s, 1, "Reset\n"); 654 655 ccid_reset(s); 656 } 657 658 static const char *ccid_control_to_str(USBCCIDState *s, int request) 659 { 660 switch (request) { 661 /* generic - should be factored out if there are other debugees */ 662 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 663 return "(generic) set address"; 664 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 665 return "(generic) get descriptor"; 666 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 667 return "(generic) get configuration"; 668 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 669 return "(generic) set configuration"; 670 case DeviceRequest | USB_REQ_GET_STATUS: 671 return "(generic) get status"; 672 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 673 return "(generic) clear feature"; 674 case DeviceOutRequest | USB_REQ_SET_FEATURE: 675 return "(generic) set_feature"; 676 case InterfaceRequest | USB_REQ_GET_INTERFACE: 677 return "(generic) get interface"; 678 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 679 return "(generic) set interface"; 680 /* class requests */ 681 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 682 return "ABORT"; 683 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 684 return "GET_CLOCK_FREQUENCIES"; 685 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 686 return "GET_DATA_RATES"; 687 } 688 return "unknown"; 689 } 690 691 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 692 int value, int index, int length, uint8_t *data) 693 { 694 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); 695 int ret; 696 697 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 698 ccid_control_to_str(s, request), request, value); 699 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 700 if (ret >= 0) { 701 return; 702 } 703 704 switch (request) { 705 /* Class specific requests. */ 706 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 707 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 708 p->status = USB_RET_STALL; 709 break; 710 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 711 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 712 p->status = USB_RET_STALL; 713 break; 714 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 715 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 716 p->status = USB_RET_STALL; 717 break; 718 default: 719 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 720 request, value); 721 p->status = USB_RET_STALL; 722 break; 723 } 724 } 725 726 static bool ccid_card_inserted(USBCCIDState *s) 727 { 728 return s->bmSlotICCState & SLOT_0_STATE_MASK; 729 } 730 731 static uint8_t ccid_card_status(USBCCIDState *s) 732 { 733 return ccid_card_inserted(s) 734 ? (s->powered ? 735 ICC_STATUS_PRESENT_ACTIVE 736 : ICC_STATUS_PRESENT_INACTIVE 737 ) 738 : ICC_STATUS_NOT_PRESENT; 739 } 740 741 static uint8_t ccid_calc_status(USBCCIDState *s) 742 { 743 /* 744 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 745 * bmCommandStatus 746 */ 747 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 748 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 749 return ret; 750 } 751 752 static void ccid_reset_error_status(USBCCIDState *s) 753 { 754 s->bError = ERROR_CMD_NOT_SUPPORTED; 755 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 756 } 757 758 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 759 { 760 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 761 if (h == NULL) { 762 return; 763 } 764 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 765 h->b.hdr.dwLength = 0; 766 h->b.hdr.bSlot = recv->bSlot; 767 h->b.hdr.bSeq = recv->bSeq; 768 h->b.bStatus = ccid_calc_status(s); 769 h->b.bError = s->bError; 770 h->bClockStatus = CLOCK_STATUS_RUNNING; 771 ccid_reset_error_status(s); 772 } 773 774 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 775 { 776 CCID_Parameter *h; 777 uint32_t len = s->ulProtocolDataStructureSize; 778 779 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 780 if (h == NULL) { 781 return; 782 } 783 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 784 h->b.hdr.dwLength = 0; 785 h->b.hdr.bSlot = recv->bSlot; 786 h->b.hdr.bSeq = recv->bSeq; 787 h->b.bStatus = ccid_calc_status(s); 788 h->b.bError = s->bError; 789 h->bProtocolNum = s->bProtocolNum; 790 h->abProtocolDataStructure = s->abProtocolDataStructure; 791 ccid_reset_error_status(s); 792 } 793 794 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 795 const uint8_t *data, uint32_t len) 796 { 797 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 798 799 if (p == NULL) { 800 return; 801 } 802 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 803 p->b.hdr.dwLength = cpu_to_le32(len); 804 p->b.hdr.bSlot = slot; 805 p->b.hdr.bSeq = seq; 806 p->b.bStatus = ccid_calc_status(s); 807 p->b.bError = s->bError; 808 if (p->b.bError) { 809 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 810 } 811 memcpy(p->abData, data, len); 812 ccid_reset_error_status(s); 813 } 814 815 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 816 { 817 s->bmCommandStatus = COMMAND_STATUS_FAILED; 818 s->bError = error; 819 } 820 821 static void ccid_write_data_block_answer(USBCCIDState *s, 822 const uint8_t *data, uint32_t len) 823 { 824 uint8_t seq; 825 uint8_t slot; 826 827 if (!ccid_has_pending_answers(s)) { 828 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 829 ccid_report_error_failed(s, ERROR_ICC_MUTE); 830 return; 831 } 832 ccid_remove_pending_answer(s, &slot, &seq); 833 ccid_write_data_block(s, slot, seq, data, len); 834 } 835 836 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 837 { 838 int i; 839 840 if (len < 2 || !(atr[1] & 0x80)) { 841 /* too short or TD1 not included */ 842 return 0; /* T=0, default */ 843 } 844 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 845 i += !!(atr[1] & 0x80); 846 return atr[i] & 0x0f; 847 } 848 849 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 850 { 851 const uint8_t *atr = NULL; 852 uint32_t len = 0; 853 uint8_t atr_protocol_num; 854 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 855 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 856 857 if (s->card) { 858 atr = ccid_card_get_atr(s->card, &len); 859 } 860 atr_protocol_num = atr_get_protocol_num(atr, len); 861 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 862 atr_protocol_num); 863 /* set parameters from ATR - see spec page 109 */ 864 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 865 : s->bProtocolNum); 866 switch (atr_protocol_num) { 867 case 0: 868 /* TODO: unimplemented ATR T0 parameters */ 869 t0->bmFindexDindex = 0; 870 t0->bmTCCKST0 = 0; 871 t0->bGuardTimeT0 = 0; 872 t0->bWaitingIntegerT0 = 0; 873 t0->bClockStop = 0; 874 break; 875 case 1: 876 /* TODO: unimplemented ATR T1 parameters */ 877 t1->bmFindexDindex = 0; 878 t1->bmTCCKST1 = 0; 879 t1->bGuardTimeT1 = 0; 880 t1->bWaitingIntegerT1 = 0; 881 t1->bClockStop = 0; 882 t1->bIFSC = 0; 883 t1->bNadValue = 0; 884 break; 885 default: 886 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 887 __func__, atr_protocol_num); 888 } 889 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 890 } 891 892 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 893 { 894 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 895 uint32_t protocol_num = ph->bProtocolNum & 3; 896 897 if (protocol_num != 0 && protocol_num != 1) { 898 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 899 return; 900 } 901 s->bProtocolNum = protocol_num; 902 s->abProtocolDataStructure = ph->abProtocolDataStructure; 903 } 904 905 /* 906 * must be 5 bytes for T=0, 7 bytes for T=1 907 * See page 52 908 */ 909 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 910 .t1 = { 911 .bmFindexDindex = 0x77, 912 .bmTCCKST1 = 0x00, 913 .bGuardTimeT1 = 0x00, 914 .bWaitingIntegerT1 = 0x00, 915 .bClockStop = 0x00, 916 .bIFSC = 0xfe, 917 .bNadValue = 0x00, 918 } 919 }; 920 921 static void ccid_reset_parameters(USBCCIDState *s) 922 { 923 s->bProtocolNum = 0; /* T=0 */ 924 s->abProtocolDataStructure = defaultProtocolDataStructure; 925 } 926 927 /* NOTE: only a single slot is supported (SLOT_0) */ 928 static void ccid_on_slot_change(USBCCIDState *s, bool full) 929 { 930 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 931 uint8_t current = s->bmSlotICCState; 932 if (full) { 933 s->bmSlotICCState |= SLOT_0_STATE_MASK; 934 } else { 935 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 936 } 937 if (current != s->bmSlotICCState) { 938 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 939 } 940 s->notify_slot_change = true; 941 usb_wakeup(s->intr, 0); 942 } 943 944 static void ccid_write_data_block_error( 945 USBCCIDState *s, uint8_t slot, uint8_t seq) 946 { 947 ccid_write_data_block(s, slot, seq, NULL, 0); 948 } 949 950 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 951 { 952 uint32_t len; 953 954 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 955 DPRINTF(s, 1, 956 "usb-ccid: not sending apdu to client, no card connected\n"); 957 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 958 return; 959 } 960 len = le32_to_cpu(recv->hdr.dwLength); 961 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 962 recv->hdr.bSeq, len); 963 ccid_add_pending_answer(s, (CCID_Header *)recv); 964 if (s->card) { 965 ccid_card_apdu_from_guest(s->card, recv->abData, len); 966 } else { 967 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 968 } 969 } 970 971 static const char *ccid_message_type_to_str(uint8_t type) 972 { 973 switch (type) { 974 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 975 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 976 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 977 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 978 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 979 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 980 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 981 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 982 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 983 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 984 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 985 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 986 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 987 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 988 return "SetDataRateAndClockFrequency"; 989 } 990 return "unknown"; 991 } 992 993 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 994 { 995 CCID_Header *ccid_header; 996 997 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 998 p->status = USB_RET_STALL; 999 return; 1000 } 1001 ccid_header = (CCID_Header *)s->bulk_out_data; 1002 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 1003 s->bulk_out_pos += p->iov.size; 1004 if (p->iov.size == CCID_MAX_PACKET_SIZE) { 1005 DPRINTF(s, D_VERBOSE, 1006 "usb-ccid: bulk_in: expecting more packets (%zd/%d)\n", 1007 p->iov.size, ccid_header->dwLength); 1008 return; 1009 } 1010 if (s->bulk_out_pos < 10) { 1011 DPRINTF(s, 1, 1012 "%s: bad USB_TOKEN_OUT length, should be at least 10 bytes\n", 1013 __func__); 1014 } else { 1015 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1016 ccid_header->bMessageType, 1017 ccid_message_type_to_str(ccid_header->bMessageType)); 1018 switch (ccid_header->bMessageType) { 1019 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1020 ccid_write_slot_status(s, ccid_header); 1021 break; 1022 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1023 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1024 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1025 s->powered = true; 1026 if (!ccid_card_inserted(s)) { 1027 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1028 } 1029 /* atr is written regardless of error. */ 1030 ccid_write_data_block_atr(s, ccid_header); 1031 break; 1032 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1033 ccid_reset_error_status(s); 1034 s->powered = false; 1035 ccid_write_slot_status(s, ccid_header); 1036 break; 1037 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1038 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1039 break; 1040 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1041 ccid_reset_error_status(s); 1042 ccid_set_parameters(s, ccid_header); 1043 ccid_write_parameters(s, ccid_header); 1044 break; 1045 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1046 ccid_reset_error_status(s); 1047 ccid_reset_parameters(s); 1048 ccid_write_parameters(s, ccid_header); 1049 break; 1050 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1051 ccid_reset_error_status(s); 1052 ccid_write_parameters(s, ccid_header); 1053 break; 1054 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1055 ccid_report_error_failed(s, 0); 1056 ccid_write_slot_status(s, ccid_header); 1057 break; 1058 default: 1059 DPRINTF(s, 1, 1060 "handle_data: ERROR: unhandled message type %Xh\n", 1061 ccid_header->bMessageType); 1062 /* 1063 * The caller is expecting the device to respond, tell it we 1064 * don't support the operation. 1065 */ 1066 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1067 ccid_write_slot_status(s, ccid_header); 1068 break; 1069 } 1070 } 1071 s->bulk_out_pos = 0; 1072 } 1073 1074 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p) 1075 { 1076 int len = 0; 1077 1078 ccid_bulk_in_get(s); 1079 if (s->current_bulk_in != NULL) { 1080 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1081 p->iov.size); 1082 usb_packet_copy(p, s->current_bulk_in->data + 1083 s->current_bulk_in->pos, len); 1084 s->current_bulk_in->pos += len; 1085 if (s->current_bulk_in->pos == s->current_bulk_in->len) { 1086 ccid_bulk_in_release(s); 1087 } 1088 } else { 1089 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1090 p->status = USB_RET_NAK; 1091 } 1092 if (len) { 1093 DPRINTF(s, D_MORE_INFO, 1094 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1095 __func__, p->iov.size, len); 1096 } 1097 if (len < p->iov.size) { 1098 DPRINTF(s, 1, 1099 "%s: returning short (EREMOTEIO) %d < %zd\n", 1100 __func__, len, p->iov.size); 1101 } 1102 } 1103 1104 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1105 { 1106 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); 1107 uint8_t buf[2]; 1108 1109 switch (p->pid) { 1110 case USB_TOKEN_OUT: 1111 ccid_handle_bulk_out(s, p); 1112 break; 1113 1114 case USB_TOKEN_IN: 1115 switch (p->ep->nr) { 1116 case CCID_BULK_IN_EP: 1117 ccid_bulk_in_copy_to_guest(s, p); 1118 break; 1119 case CCID_INT_IN_EP: 1120 if (s->notify_slot_change) { 1121 /* page 56, RDR_to_PC_NotifySlotChange */ 1122 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1123 buf[1] = s->bmSlotICCState; 1124 usb_packet_copy(p, buf, 2); 1125 s->notify_slot_change = false; 1126 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1127 DPRINTF(s, D_INFO, 1128 "handle_data: int_in: notify_slot_change %X, " 1129 "requested len %zd\n", 1130 s->bmSlotICCState, p->iov.size); 1131 } else { 1132 p->status = USB_RET_NAK; 1133 } 1134 break; 1135 default: 1136 DPRINTF(s, 1, "Bad endpoint\n"); 1137 p->status = USB_RET_STALL; 1138 break; 1139 } 1140 break; 1141 default: 1142 DPRINTF(s, 1, "Bad token\n"); 1143 p->status = USB_RET_STALL; 1144 break; 1145 } 1146 } 1147 1148 static void ccid_handle_destroy(USBDevice *dev) 1149 { 1150 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); 1151 1152 ccid_bulk_in_clear(s); 1153 } 1154 1155 static void ccid_flush_pending_answers(USBCCIDState *s) 1156 { 1157 while (ccid_has_pending_answers(s)) { 1158 ccid_write_data_block_answer(s, NULL, 0); 1159 } 1160 } 1161 1162 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1163 { 1164 return s->pending_answers_num == 0 1165 ? NULL 1166 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1167 } 1168 1169 static Property ccid_props[] = { 1170 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1171 DEFINE_PROP_END_OF_LIST(), 1172 }; 1173 1174 #define TYPE_CCID_BUS "ccid-bus" 1175 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1176 1177 static const TypeInfo ccid_bus_info = { 1178 .name = TYPE_CCID_BUS, 1179 .parent = TYPE_BUS, 1180 .instance_size = sizeof(CCIDBus), 1181 }; 1182 1183 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1184 uint8_t *apdu, uint32_t len) 1185 { 1186 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev.qdev, 1187 card->qdev.parent_bus->parent); 1188 Answer *answer; 1189 1190 if (!ccid_has_pending_answers(s)) { 1191 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1192 return; 1193 } 1194 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1195 answer = ccid_peek_next_answer(s); 1196 if (answer == NULL) { 1197 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1198 ccid_report_error_failed(s, ERROR_HW_ERROR); 1199 return; 1200 } 1201 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1202 len, answer->seq, answer->slot); 1203 ccid_write_data_block_answer(s, apdu, len); 1204 } 1205 1206 void ccid_card_card_removed(CCIDCardState *card) 1207 { 1208 USBCCIDState *s = 1209 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1210 1211 ccid_on_slot_change(s, false); 1212 ccid_flush_pending_answers(s); 1213 ccid_reset(s); 1214 } 1215 1216 int ccid_card_ccid_attach(CCIDCardState *card) 1217 { 1218 USBCCIDState *s = 1219 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1220 1221 DPRINTF(s, 1, "CCID Attach\n"); 1222 if (s->migration_state == MIGRATION_MIGRATED) { 1223 s->migration_state = MIGRATION_NONE; 1224 } 1225 return 0; 1226 } 1227 1228 void ccid_card_ccid_detach(CCIDCardState *card) 1229 { 1230 USBCCIDState *s = 1231 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1232 1233 DPRINTF(s, 1, "CCID Detach\n"); 1234 if (ccid_card_inserted(s)) { 1235 ccid_on_slot_change(s, false); 1236 } 1237 ccid_detach(s); 1238 } 1239 1240 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1241 { 1242 USBCCIDState *s = 1243 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1244 1245 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1246 s->last_answer_error = error; 1247 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1248 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1249 /* 1250 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1251 * so check that first to not trigger abort 1252 */ 1253 if (ccid_has_pending_answers(s)) { 1254 ccid_write_data_block_answer(s, NULL, 0); 1255 } 1256 } 1257 1258 void ccid_card_card_inserted(CCIDCardState *card) 1259 { 1260 USBCCIDState *s = 1261 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1262 1263 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1264 ccid_flush_pending_answers(s); 1265 ccid_on_slot_change(s, true); 1266 } 1267 1268 static int ccid_card_exit(DeviceState *qdev) 1269 { 1270 int ret = 0; 1271 CCIDCardState *card = CCID_CARD(qdev); 1272 USBCCIDState *s = 1273 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1274 1275 if (ccid_card_inserted(s)) { 1276 ccid_card_card_removed(card); 1277 } 1278 ret = ccid_card_exitfn(card); 1279 s->card = NULL; 1280 return ret; 1281 } 1282 1283 static int ccid_card_init(DeviceState *qdev) 1284 { 1285 CCIDCardState *card = CCID_CARD(qdev); 1286 USBCCIDState *s = 1287 DO_UPCAST(USBCCIDState, dev.qdev, card->qdev.parent_bus->parent); 1288 int ret = 0; 1289 1290 if (card->slot != 0) { 1291 error_report("Warning: usb-ccid supports one slot, can't add %d", 1292 card->slot); 1293 return -1; 1294 } 1295 if (s->card != NULL) { 1296 error_report("Warning: usb-ccid card already full, not adding"); 1297 return -1; 1298 } 1299 ret = ccid_card_initfn(card); 1300 if (ret == 0) { 1301 s->card = card; 1302 } 1303 return ret; 1304 } 1305 1306 static int ccid_initfn(USBDevice *dev) 1307 { 1308 USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev); 1309 1310 usb_desc_create_serial(dev); 1311 usb_desc_init(dev); 1312 qbus_create_inplace(&s->bus.qbus, TYPE_CCID_BUS, &dev->qdev, NULL); 1313 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1314 s->bus.qbus.allow_hotplug = 1; 1315 s->card = NULL; 1316 s->migration_state = MIGRATION_NONE; 1317 s->migration_target_ip = 0; 1318 s->migration_target_port = 0; 1319 s->dev.speed = USB_SPEED_FULL; 1320 s->dev.speedmask = USB_SPEED_MASK_FULL; 1321 s->notify_slot_change = false; 1322 s->powered = true; 1323 s->pending_answers_num = 0; 1324 s->last_answer_error = 0; 1325 s->bulk_in_pending_start = 0; 1326 s->bulk_in_pending_end = 0; 1327 s->current_bulk_in = NULL; 1328 ccid_reset_error_status(s); 1329 s->bulk_out_pos = 0; 1330 ccid_reset_parameters(s); 1331 ccid_reset(s); 1332 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1333 return 0; 1334 } 1335 1336 static int ccid_post_load(void *opaque, int version_id) 1337 { 1338 USBCCIDState *s = opaque; 1339 1340 /* 1341 * This must be done after usb_device_attach, which sets state to ATTACHED, 1342 * while it must be DEFAULT in order to accept packets (like it is after 1343 * reset, but reset will reset our addr and call our reset handler which 1344 * may change state, and we don't want to do that when migrating). 1345 */ 1346 s->dev.state = s->state_vmstate; 1347 return 0; 1348 } 1349 1350 static void ccid_pre_save(void *opaque) 1351 { 1352 USBCCIDState *s = opaque; 1353 1354 s->state_vmstate = s->dev.state; 1355 if (s->dev.attached) { 1356 /* 1357 * Migrating an open device, ignore reconnection CHR_EVENT to avoid an 1358 * erroneous detach. 1359 */ 1360 s->migration_state = MIGRATION_MIGRATED; 1361 } 1362 } 1363 1364 static VMStateDescription bulk_in_vmstate = { 1365 .name = "CCID BulkIn state", 1366 .version_id = 1, 1367 .minimum_version_id = 1, 1368 .fields = (VMStateField[]) { 1369 VMSTATE_BUFFER(data, BulkIn), 1370 VMSTATE_UINT32(len, BulkIn), 1371 VMSTATE_UINT32(pos, BulkIn), 1372 VMSTATE_END_OF_LIST() 1373 } 1374 }; 1375 1376 static VMStateDescription answer_vmstate = { 1377 .name = "CCID Answer state", 1378 .version_id = 1, 1379 .minimum_version_id = 1, 1380 .fields = (VMStateField[]) { 1381 VMSTATE_UINT8(slot, Answer), 1382 VMSTATE_UINT8(seq, Answer), 1383 VMSTATE_END_OF_LIST() 1384 } 1385 }; 1386 1387 static VMStateDescription usb_device_vmstate = { 1388 .name = "usb_device", 1389 .version_id = 1, 1390 .minimum_version_id = 1, 1391 .fields = (VMStateField[]) { 1392 VMSTATE_UINT8(addr, USBDevice), 1393 VMSTATE_BUFFER(setup_buf, USBDevice), 1394 VMSTATE_BUFFER(data_buf, USBDevice), 1395 VMSTATE_END_OF_LIST() 1396 } 1397 }; 1398 1399 static VMStateDescription ccid_vmstate = { 1400 .name = CCID_DEV_NAME, 1401 .version_id = 1, 1402 .minimum_version_id = 1, 1403 .post_load = ccid_post_load, 1404 .pre_save = ccid_pre_save, 1405 .fields = (VMStateField[]) { 1406 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1407 VMSTATE_UINT8(debug, USBCCIDState), 1408 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1409 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1410 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1411 VMSTATE_UINT8(powered, USBCCIDState), 1412 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1413 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1414 VMSTATE_UINT8(bError, USBCCIDState), 1415 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1416 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1417 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1418 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1419 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1420 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1421 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1422 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1423 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1424 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1425 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1426 VMSTATE_UINT8(migration_state, USBCCIDState), 1427 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1428 VMSTATE_END_OF_LIST() 1429 } 1430 }; 1431 1432 static Property ccid_properties[] = { 1433 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1434 DEFINE_PROP_END_OF_LIST(), 1435 }; 1436 1437 static void ccid_class_initfn(ObjectClass *klass, void *data) 1438 { 1439 DeviceClass *dc = DEVICE_CLASS(klass); 1440 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1441 1442 uc->init = ccid_initfn; 1443 uc->product_desc = "QEMU USB CCID"; 1444 uc->usb_desc = &desc_ccid; 1445 uc->handle_reset = ccid_handle_reset; 1446 uc->handle_control = ccid_handle_control; 1447 uc->handle_data = ccid_handle_data; 1448 uc->handle_destroy = ccid_handle_destroy; 1449 dc->desc = "CCID Rev 1.1 smartcard reader"; 1450 dc->vmsd = &ccid_vmstate; 1451 dc->props = ccid_properties; 1452 } 1453 1454 static const TypeInfo ccid_info = { 1455 .name = CCID_DEV_NAME, 1456 .parent = TYPE_USB_DEVICE, 1457 .instance_size = sizeof(USBCCIDState), 1458 .class_init = ccid_class_initfn, 1459 }; 1460 1461 static void ccid_card_class_init(ObjectClass *klass, void *data) 1462 { 1463 DeviceClass *k = DEVICE_CLASS(klass); 1464 k->bus_type = TYPE_CCID_BUS; 1465 k->init = ccid_card_init; 1466 k->exit = ccid_card_exit; 1467 k->props = ccid_props; 1468 } 1469 1470 static const TypeInfo ccid_card_type_info = { 1471 .name = TYPE_CCID_CARD, 1472 .parent = TYPE_DEVICE, 1473 .instance_size = sizeof(CCIDCardState), 1474 .abstract = true, 1475 .class_size = sizeof(CCIDCardClass), 1476 .class_init = ccid_card_class_init, 1477 }; 1478 1479 static void ccid_register_types(void) 1480 { 1481 type_register_static(&ccid_bus_info); 1482 type_register_static(&ccid_card_type_info); 1483 type_register_static(&ccid_info); 1484 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1485 } 1486 1487 type_init(ccid_register_types) 1488