1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu/osdep.h" 38 #include "qapi/error.h" 39 #include "qemu-common.h" 40 #include "qemu/error-report.h" 41 #include "hw/usb.h" 42 #include "desc.h" 43 44 #include "ccid.h" 45 46 #define DPRINTF(s, lvl, fmt, ...) \ 47 do { \ 48 if (lvl <= s->debug) { \ 49 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 50 } \ 51 } while (0) 52 53 #define D_WARN 1 54 #define D_INFO 2 55 #define D_MORE_INFO 3 56 #define D_VERBOSE 4 57 58 #define CCID_DEV_NAME "usb-ccid" 59 #define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME) 60 /* 61 * The two options for variable sized buffers: 62 * make them constant size, for large enough constant, 63 * or handle the migration complexity - VMState doesn't handle this case. 64 * sizes are expected never to be exceeded, unless guest misbehaves. 65 */ 66 #define BULK_OUT_DATA_SIZE 65536 67 #define PENDING_ANSWERS_NUM 128 68 69 #define BULK_IN_BUF_SIZE 384 70 #define BULK_IN_PENDING_NUM 8 71 72 #define CCID_MAX_PACKET_SIZE 64 73 74 #define CCID_CONTROL_ABORT 0x1 75 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 76 #define CCID_CONTROL_GET_DATA_RATES 0x3 77 78 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 79 #define CCID_VENDOR_DESCRIPTION "QEMU" 80 #define CCID_INTERFACE_NAME "CCID Interface" 81 #define CCID_SERIAL_NUMBER_STRING "1" 82 /* 83 * Using Gemplus Vendor and Product id 84 * Effect on various drivers: 85 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 86 * linux has a number of class drivers, but openct filters based on 87 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 88 */ 89 #define CCID_VENDOR_ID 0x08e6 90 #define CCID_PRODUCT_ID 0x4433 91 #define CCID_DEVICE_VERSION 0x0000 92 93 /* 94 * BULK_OUT messages from PC to Reader 95 * Defined in CCID Rev 1.1 6.1 (page 26) 96 */ 97 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 98 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 99 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 100 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 110 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 111 112 /* 113 * BULK_IN messages from Reader to PC 114 * Defined in CCID Rev 1.1 6.2 (page 48) 115 */ 116 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 117 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 118 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 119 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 120 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 121 122 /* 123 * INTERRUPT_IN messages from Reader to PC 124 * Defined in CCID Rev 1.1 6.3 (page 56) 125 */ 126 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 127 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 128 129 /* 130 * Endpoints for CCID - addresses are up to us to decide. 131 * To support slot insertion and removal we must have an interrupt in ep 132 * in addition we need a bulk in and bulk out ep 133 * 5.2, page 20 134 */ 135 #define CCID_INT_IN_EP 1 136 #define CCID_BULK_IN_EP 2 137 #define CCID_BULK_OUT_EP 3 138 139 /* bmSlotICCState masks */ 140 #define SLOT_0_STATE_MASK 1 141 #define SLOT_0_CHANGED_MASK 2 142 143 /* Status codes that go in bStatus (see 6.2.6) */ 144 enum { 145 ICC_STATUS_PRESENT_ACTIVE = 0, 146 ICC_STATUS_PRESENT_INACTIVE, 147 ICC_STATUS_NOT_PRESENT 148 }; 149 150 enum { 151 COMMAND_STATUS_NO_ERROR = 0, 152 COMMAND_STATUS_FAILED, 153 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 154 }; 155 156 /* Error codes that go in bError (see 6.2.6) */ 157 enum { 158 ERROR_CMD_NOT_SUPPORTED = 0, 159 ERROR_CMD_ABORTED = -1, 160 ERROR_ICC_MUTE = -2, 161 ERROR_XFR_PARITY_ERROR = -3, 162 ERROR_XFR_OVERRUN = -4, 163 ERROR_HW_ERROR = -5, 164 }; 165 166 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 167 enum { 168 CLOCK_STATUS_RUNNING = 0, 169 /* 170 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 171 * 3 - unknown state. rest are RFU 172 */ 173 }; 174 175 typedef struct QEMU_PACKED CCID_Header { 176 uint8_t bMessageType; 177 uint32_t dwLength; 178 uint8_t bSlot; 179 uint8_t bSeq; 180 } CCID_Header; 181 182 typedef struct QEMU_PACKED CCID_BULK_IN { 183 CCID_Header hdr; 184 uint8_t bStatus; /* Only used in BULK_IN */ 185 uint8_t bError; /* Only used in BULK_IN */ 186 } CCID_BULK_IN; 187 188 typedef struct QEMU_PACKED CCID_SlotStatus { 189 CCID_BULK_IN b; 190 uint8_t bClockStatus; 191 } CCID_SlotStatus; 192 193 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 194 uint8_t bmFindexDindex; 195 uint8_t bmTCCKST0; 196 uint8_t bGuardTimeT0; 197 uint8_t bWaitingIntegerT0; 198 uint8_t bClockStop; 199 } CCID_T0ProtocolDataStructure; 200 201 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 202 uint8_t bmFindexDindex; 203 uint8_t bmTCCKST1; 204 uint8_t bGuardTimeT1; 205 uint8_t bWaitingIntegerT1; 206 uint8_t bClockStop; 207 uint8_t bIFSC; 208 uint8_t bNadValue; 209 } CCID_T1ProtocolDataStructure; 210 211 typedef union CCID_ProtocolDataStructure { 212 CCID_T0ProtocolDataStructure t0; 213 CCID_T1ProtocolDataStructure t1; 214 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 215 } CCID_ProtocolDataStructure; 216 217 typedef struct QEMU_PACKED CCID_Parameter { 218 CCID_BULK_IN b; 219 uint8_t bProtocolNum; 220 CCID_ProtocolDataStructure abProtocolDataStructure; 221 } CCID_Parameter; 222 223 typedef struct QEMU_PACKED CCID_DataBlock { 224 CCID_BULK_IN b; 225 uint8_t bChainParameter; 226 uint8_t abData[0]; 227 } CCID_DataBlock; 228 229 /* 6.1.4 PC_to_RDR_XfrBlock */ 230 typedef struct QEMU_PACKED CCID_XferBlock { 231 CCID_Header hdr; 232 uint8_t bBWI; /* Block Waiting Timeout */ 233 uint16_t wLevelParameter; /* XXX currently unused */ 234 uint8_t abData[0]; 235 } CCID_XferBlock; 236 237 typedef struct QEMU_PACKED CCID_IccPowerOn { 238 CCID_Header hdr; 239 uint8_t bPowerSelect; 240 uint16_t abRFU; 241 } CCID_IccPowerOn; 242 243 typedef struct QEMU_PACKED CCID_IccPowerOff { 244 CCID_Header hdr; 245 uint16_t abRFU; 246 } CCID_IccPowerOff; 247 248 typedef struct QEMU_PACKED CCID_SetParameters { 249 CCID_Header hdr; 250 uint8_t bProtocolNum; 251 uint16_t abRFU; 252 CCID_ProtocolDataStructure abProtocolDataStructure; 253 } CCID_SetParameters; 254 255 typedef struct CCID_Notify_Slot_Change { 256 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 257 uint8_t bmSlotICCState; 258 } CCID_Notify_Slot_Change; 259 260 /* used for DataBlock response to XferBlock */ 261 typedef struct Answer { 262 uint8_t slot; 263 uint8_t seq; 264 } Answer; 265 266 /* pending BULK_IN messages */ 267 typedef struct BulkIn { 268 uint8_t data[BULK_IN_BUF_SIZE]; 269 uint32_t len; 270 uint32_t pos; 271 } BulkIn; 272 273 typedef struct CCIDBus { 274 BusState qbus; 275 } CCIDBus; 276 277 /* 278 * powered - defaults to true, changed by PowerOn/PowerOff messages 279 */ 280 typedef struct USBCCIDState { 281 USBDevice dev; 282 USBEndpoint *intr; 283 USBEndpoint *bulk; 284 CCIDBus bus; 285 CCIDCardState *card; 286 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 287 uint32_t bulk_in_pending_start; 288 uint32_t bulk_in_pending_end; /* first free */ 289 uint32_t bulk_in_pending_num; 290 BulkIn *current_bulk_in; 291 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 292 uint32_t bulk_out_pos; 293 uint64_t last_answer_error; 294 Answer pending_answers[PENDING_ANSWERS_NUM]; 295 uint32_t pending_answers_start; 296 uint32_t pending_answers_end; 297 uint32_t pending_answers_num; 298 uint8_t bError; 299 uint8_t bmCommandStatus; 300 uint8_t bProtocolNum; 301 CCID_ProtocolDataStructure abProtocolDataStructure; 302 uint32_t ulProtocolDataStructureSize; 303 uint32_t state_vmstate; 304 uint8_t bmSlotICCState; 305 uint8_t powered; 306 uint8_t notify_slot_change; 307 uint8_t debug; 308 } USBCCIDState; 309 310 /* 311 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 312 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 313 * Specification. 314 * 315 * This device implemented based on the spec and with an Athena Smart Card 316 * Reader as reference: 317 * 0dc3:1004 Athena Smartcard Solutions, Inc. 318 */ 319 320 static const uint8_t qemu_ccid_descriptor[] = { 321 /* Smart Card Device Class Descriptor */ 322 0x36, /* u8 bLength; */ 323 0x21, /* u8 bDescriptorType; Functional */ 324 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 325 0x00, /* 326 * u8 bMaxSlotIndex; The index of the highest available 327 * slot on this device. All slots are consecutive starting 328 * at 00h. 329 */ 330 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 331 332 0x01, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 333 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 334 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 335 0xa0, 0x0f, 0x00, 0x00, 336 /* u32 dwMaximumClock; */ 337 0x00, 0x00, 0x01, 0x00, 338 0x00, /* u8 bNumClockSupported; * 339 * 0 means just the default and max. */ 340 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 341 0x80, 0x25, 0x00, 0x00, 342 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 343 0x00, 0xC2, 0x01, 0x00, 344 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 345 * default and max */ 346 /* u32 dwMaxIFSD; * 347 * maximum IFSD supported by CCID for protocol * 348 * T=1 (Maximum seen from various cards) */ 349 0xfe, 0x00, 0x00, 0x00, 350 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 351 0x00, 0x00, 0x00, 0x00, 352 /* u32 dwMechanical; 0 - no special characteristics. */ 353 0x00, 0x00, 0x00, 0x00, 354 /* 355 * u32 dwFeatures; 356 * 0 - No special characteristics 357 * + 2 Automatic parameter configuration based on ATR data 358 * + 4 Automatic activation of ICC on inserting 359 * + 8 Automatic ICC voltage selection 360 * + 10 Automatic ICC clock frequency change 361 * + 20 Automatic baud rate change 362 * + 40 Automatic parameters negotiation made by the CCID 363 * + 80 automatic PPS made by the CCID 364 * 100 CCID can set ICC in clock stop mode 365 * 200 NAD value other then 00 accepted (T=1 protocol) 366 * + 400 Automatic IFSD exchange as first exchange (T=1) 367 * One of the following only: 368 * + 10000 TPDU level exchanges with CCID 369 * 20000 Short APDU level exchange with CCID 370 * 40000 Short and Extended APDU level exchange with CCID 371 * 372 * 100000 USB Wake up signaling supported on card 373 * insertion and removal. Must set bit 5 in bmAttributes 374 * in Configuration descriptor if 100000 is set. 375 */ 376 0xfe, 0x04, 0x01, 0x00, 377 /* 378 * u32 dwMaxCCIDMessageLength; For extended APDU in 379 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 380 * wMaxPacketSize of the Bulk-OUT endpoint 381 */ 382 0x12, 0x00, 0x01, 0x00, 383 0xFF, /* 384 * u8 bClassGetResponse; Significant only for CCID that 385 * offers an APDU level for exchanges. Indicates the 386 * default class value used by the CCID when it sends a 387 * Get Response command to perform the transportation of 388 * an APDU by T=0 protocol 389 * FFh indicates that the CCID echos the class of the APDU. 390 */ 391 0xFF, /* 392 * u8 bClassEnvelope; EAPDU only. Envelope command for 393 * T=0 394 */ 395 0x00, 0x00, /* 396 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 397 * line for LCD display used for PIN entry. 0000 - no LCD 398 */ 399 0x01, /* 400 * u8 bPINSupport; 01h PIN Verification, 401 * 02h PIN Modification 402 */ 403 0x01, /* u8 bMaxCCIDBusySlots; */ 404 }; 405 406 enum { 407 STR_MANUFACTURER = 1, 408 STR_PRODUCT, 409 STR_SERIALNUMBER, 410 STR_INTERFACE, 411 }; 412 413 static const USBDescStrings desc_strings = { 414 [STR_MANUFACTURER] = "QEMU", 415 [STR_PRODUCT] = "QEMU USB CCID", 416 [STR_SERIALNUMBER] = "1", 417 [STR_INTERFACE] = "CCID Interface", 418 }; 419 420 static const USBDescIface desc_iface0 = { 421 .bInterfaceNumber = 0, 422 .bNumEndpoints = 3, 423 .bInterfaceClass = USB_CLASS_CSCID, 424 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 425 .bInterfaceProtocol = 0x00, 426 .iInterface = STR_INTERFACE, 427 .ndesc = 1, 428 .descs = (USBDescOther[]) { 429 { 430 /* smartcard descriptor */ 431 .data = qemu_ccid_descriptor, 432 }, 433 }, 434 .eps = (USBDescEndpoint[]) { 435 { 436 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 437 .bmAttributes = USB_ENDPOINT_XFER_INT, 438 .bInterval = 255, 439 .wMaxPacketSize = 64, 440 },{ 441 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 442 .bmAttributes = USB_ENDPOINT_XFER_BULK, 443 .wMaxPacketSize = 64, 444 },{ 445 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 446 .bmAttributes = USB_ENDPOINT_XFER_BULK, 447 .wMaxPacketSize = 64, 448 }, 449 } 450 }; 451 452 static const USBDescDevice desc_device = { 453 .bcdUSB = 0x0110, 454 .bMaxPacketSize0 = 64, 455 .bNumConfigurations = 1, 456 .confs = (USBDescConfig[]) { 457 { 458 .bNumInterfaces = 1, 459 .bConfigurationValue = 1, 460 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 461 USB_CFG_ATT_WAKEUP, 462 .bMaxPower = 50, 463 .nif = 1, 464 .ifs = &desc_iface0, 465 }, 466 }, 467 }; 468 469 static const USBDesc desc_ccid = { 470 .id = { 471 .idVendor = CCID_VENDOR_ID, 472 .idProduct = CCID_PRODUCT_ID, 473 .bcdDevice = CCID_DEVICE_VERSION, 474 .iManufacturer = STR_MANUFACTURER, 475 .iProduct = STR_PRODUCT, 476 .iSerialNumber = STR_SERIALNUMBER, 477 }, 478 .full = &desc_device, 479 .str = desc_strings, 480 }; 481 482 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 483 { 484 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 485 486 if (cc->get_atr) { 487 return cc->get_atr(card, len); 488 } 489 return NULL; 490 } 491 492 static void ccid_card_apdu_from_guest(CCIDCardState *card, 493 const uint8_t *apdu, 494 uint32_t len) 495 { 496 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 497 498 if (cc->apdu_from_guest) { 499 cc->apdu_from_guest(card, apdu, len); 500 } 501 } 502 503 static bool ccid_has_pending_answers(USBCCIDState *s) 504 { 505 return s->pending_answers_num > 0; 506 } 507 508 static void ccid_clear_pending_answers(USBCCIDState *s) 509 { 510 s->pending_answers_num = 0; 511 s->pending_answers_start = 0; 512 s->pending_answers_end = 0; 513 } 514 515 static void ccid_print_pending_answers(USBCCIDState *s) 516 { 517 Answer *answer; 518 int i, count; 519 520 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 521 if (!ccid_has_pending_answers(s)) { 522 DPRINTF(s, D_VERBOSE, " empty\n"); 523 return; 524 } 525 for (i = s->pending_answers_start, count = s->pending_answers_num ; 526 count > 0; count--, i++) { 527 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 528 if (count == 1) { 529 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 530 } else { 531 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 532 } 533 } 534 } 535 536 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 537 { 538 Answer *answer; 539 540 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 541 s->pending_answers_num++; 542 answer = 543 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 544 answer->slot = hdr->bSlot; 545 answer->seq = hdr->bSeq; 546 ccid_print_pending_answers(s); 547 } 548 549 static void ccid_remove_pending_answer(USBCCIDState *s, 550 uint8_t *slot, uint8_t *seq) 551 { 552 Answer *answer; 553 554 assert(s->pending_answers_num > 0); 555 s->pending_answers_num--; 556 answer = 557 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 558 *slot = answer->slot; 559 *seq = answer->seq; 560 ccid_print_pending_answers(s); 561 } 562 563 static void ccid_bulk_in_clear(USBCCIDState *s) 564 { 565 s->bulk_in_pending_start = 0; 566 s->bulk_in_pending_end = 0; 567 s->bulk_in_pending_num = 0; 568 } 569 570 static void ccid_bulk_in_release(USBCCIDState *s) 571 { 572 assert(s->current_bulk_in != NULL); 573 s->current_bulk_in->pos = 0; 574 s->current_bulk_in = NULL; 575 } 576 577 static void ccid_bulk_in_get(USBCCIDState *s) 578 { 579 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 580 return; 581 } 582 assert(s->bulk_in_pending_num > 0); 583 s->bulk_in_pending_num--; 584 s->current_bulk_in = 585 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 586 } 587 588 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 589 { 590 BulkIn *bulk_in; 591 592 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 593 594 /* look for an existing element */ 595 if (len > BULK_IN_BUF_SIZE) { 596 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 597 "discarding message.\n", 598 __func__, len, BULK_IN_BUF_SIZE); 599 return NULL; 600 } 601 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 602 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 603 "discarding message.\n", __func__); 604 return NULL; 605 } 606 bulk_in = 607 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 608 s->bulk_in_pending_num++; 609 bulk_in->len = len; 610 return bulk_in->data; 611 } 612 613 static void ccid_reset(USBCCIDState *s) 614 { 615 ccid_bulk_in_clear(s); 616 ccid_clear_pending_answers(s); 617 } 618 619 static void ccid_detach(USBCCIDState *s) 620 { 621 ccid_reset(s); 622 } 623 624 static void ccid_handle_reset(USBDevice *dev) 625 { 626 USBCCIDState *s = USB_CCID_DEV(dev); 627 628 DPRINTF(s, 1, "Reset\n"); 629 630 ccid_reset(s); 631 } 632 633 static const char *ccid_control_to_str(USBCCIDState *s, int request) 634 { 635 switch (request) { 636 /* generic - should be factored out if there are other debugees */ 637 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 638 return "(generic) set address"; 639 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 640 return "(generic) get descriptor"; 641 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 642 return "(generic) get configuration"; 643 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 644 return "(generic) set configuration"; 645 case DeviceRequest | USB_REQ_GET_STATUS: 646 return "(generic) get status"; 647 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 648 return "(generic) clear feature"; 649 case DeviceOutRequest | USB_REQ_SET_FEATURE: 650 return "(generic) set_feature"; 651 case InterfaceRequest | USB_REQ_GET_INTERFACE: 652 return "(generic) get interface"; 653 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 654 return "(generic) set interface"; 655 /* class requests */ 656 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 657 return "ABORT"; 658 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 659 return "GET_CLOCK_FREQUENCIES"; 660 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 661 return "GET_DATA_RATES"; 662 } 663 return "unknown"; 664 } 665 666 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 667 int value, int index, int length, uint8_t *data) 668 { 669 USBCCIDState *s = USB_CCID_DEV(dev); 670 int ret; 671 672 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 673 ccid_control_to_str(s, request), request, value); 674 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 675 if (ret >= 0) { 676 return; 677 } 678 679 switch (request) { 680 /* Class specific requests. */ 681 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 682 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 683 p->status = USB_RET_STALL; 684 break; 685 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 686 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 687 p->status = USB_RET_STALL; 688 break; 689 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 690 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 691 p->status = USB_RET_STALL; 692 break; 693 default: 694 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 695 request, value); 696 p->status = USB_RET_STALL; 697 break; 698 } 699 } 700 701 static bool ccid_card_inserted(USBCCIDState *s) 702 { 703 return s->bmSlotICCState & SLOT_0_STATE_MASK; 704 } 705 706 static uint8_t ccid_card_status(USBCCIDState *s) 707 { 708 return ccid_card_inserted(s) 709 ? (s->powered ? 710 ICC_STATUS_PRESENT_ACTIVE 711 : ICC_STATUS_PRESENT_INACTIVE 712 ) 713 : ICC_STATUS_NOT_PRESENT; 714 } 715 716 static uint8_t ccid_calc_status(USBCCIDState *s) 717 { 718 /* 719 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 720 * bmCommandStatus 721 */ 722 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 723 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 724 return ret; 725 } 726 727 static void ccid_reset_error_status(USBCCIDState *s) 728 { 729 s->bError = ERROR_CMD_NOT_SUPPORTED; 730 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 731 } 732 733 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 734 { 735 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 736 if (h == NULL) { 737 return; 738 } 739 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 740 h->b.hdr.dwLength = 0; 741 h->b.hdr.bSlot = recv->bSlot; 742 h->b.hdr.bSeq = recv->bSeq; 743 h->b.bStatus = ccid_calc_status(s); 744 h->b.bError = s->bError; 745 h->bClockStatus = CLOCK_STATUS_RUNNING; 746 ccid_reset_error_status(s); 747 usb_wakeup(s->bulk, 0); 748 } 749 750 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 751 { 752 CCID_Parameter *h; 753 uint32_t len = s->ulProtocolDataStructureSize; 754 755 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 756 if (h == NULL) { 757 return; 758 } 759 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 760 h->b.hdr.dwLength = 0; 761 h->b.hdr.bSlot = recv->bSlot; 762 h->b.hdr.bSeq = recv->bSeq; 763 h->b.bStatus = ccid_calc_status(s); 764 h->b.bError = s->bError; 765 h->bProtocolNum = s->bProtocolNum; 766 h->abProtocolDataStructure = s->abProtocolDataStructure; 767 ccid_reset_error_status(s); 768 usb_wakeup(s->bulk, 0); 769 } 770 771 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 772 const uint8_t *data, uint32_t len) 773 { 774 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 775 776 if (p == NULL) { 777 return; 778 } 779 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 780 p->b.hdr.dwLength = cpu_to_le32(len); 781 p->b.hdr.bSlot = slot; 782 p->b.hdr.bSeq = seq; 783 p->b.bStatus = ccid_calc_status(s); 784 p->b.bError = s->bError; 785 if (p->b.bError) { 786 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 787 } 788 if (len) { 789 g_assert_nonnull(data); 790 memcpy(p->abData, data, len); 791 } 792 ccid_reset_error_status(s); 793 usb_wakeup(s->bulk, 0); 794 } 795 796 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 797 { 798 s->bmCommandStatus = COMMAND_STATUS_FAILED; 799 s->bError = error; 800 } 801 802 static void ccid_write_data_block_answer(USBCCIDState *s, 803 const uint8_t *data, uint32_t len) 804 { 805 uint8_t seq; 806 uint8_t slot; 807 808 if (!ccid_has_pending_answers(s)) { 809 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 810 ccid_report_error_failed(s, ERROR_ICC_MUTE); 811 return; 812 } 813 ccid_remove_pending_answer(s, &slot, &seq); 814 ccid_write_data_block(s, slot, seq, data, len); 815 } 816 817 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 818 { 819 int i; 820 821 if (len < 2 || !(atr[1] & 0x80)) { 822 /* too short or TD1 not included */ 823 return 0; /* T=0, default */ 824 } 825 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 826 i += !!(atr[1] & 0x80); 827 return atr[i] & 0x0f; 828 } 829 830 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 831 { 832 const uint8_t *atr = NULL; 833 uint32_t len = 0; 834 uint8_t atr_protocol_num; 835 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 836 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 837 838 if (s->card) { 839 atr = ccid_card_get_atr(s->card, &len); 840 } 841 atr_protocol_num = atr_get_protocol_num(atr, len); 842 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 843 atr_protocol_num); 844 /* set parameters from ATR - see spec page 109 */ 845 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 846 : s->bProtocolNum); 847 switch (atr_protocol_num) { 848 case 0: 849 /* TODO: unimplemented ATR T0 parameters */ 850 t0->bmFindexDindex = 0; 851 t0->bmTCCKST0 = 0; 852 t0->bGuardTimeT0 = 0; 853 t0->bWaitingIntegerT0 = 0; 854 t0->bClockStop = 0; 855 break; 856 case 1: 857 /* TODO: unimplemented ATR T1 parameters */ 858 t1->bmFindexDindex = 0; 859 t1->bmTCCKST1 = 0; 860 t1->bGuardTimeT1 = 0; 861 t1->bWaitingIntegerT1 = 0; 862 t1->bClockStop = 0; 863 t1->bIFSC = 0; 864 t1->bNadValue = 0; 865 break; 866 default: 867 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 868 __func__, atr_protocol_num); 869 } 870 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 871 } 872 873 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 874 { 875 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 876 uint32_t protocol_num = ph->bProtocolNum & 3; 877 878 if (protocol_num != 0 && protocol_num != 1) { 879 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 880 return; 881 } 882 s->bProtocolNum = protocol_num; 883 s->abProtocolDataStructure = ph->abProtocolDataStructure; 884 } 885 886 /* 887 * must be 5 bytes for T=0, 7 bytes for T=1 888 * See page 52 889 */ 890 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 891 .t1 = { 892 .bmFindexDindex = 0x77, 893 .bmTCCKST1 = 0x00, 894 .bGuardTimeT1 = 0x00, 895 .bWaitingIntegerT1 = 0x00, 896 .bClockStop = 0x00, 897 .bIFSC = 0xfe, 898 .bNadValue = 0x00, 899 } 900 }; 901 902 static void ccid_reset_parameters(USBCCIDState *s) 903 { 904 s->bProtocolNum = 0; /* T=0 */ 905 s->abProtocolDataStructure = defaultProtocolDataStructure; 906 } 907 908 /* NOTE: only a single slot is supported (SLOT_0) */ 909 static void ccid_on_slot_change(USBCCIDState *s, bool full) 910 { 911 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 912 uint8_t current = s->bmSlotICCState; 913 if (full) { 914 s->bmSlotICCState |= SLOT_0_STATE_MASK; 915 } else { 916 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 917 } 918 if (current != s->bmSlotICCState) { 919 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 920 } 921 s->notify_slot_change = true; 922 usb_wakeup(s->intr, 0); 923 } 924 925 static void ccid_write_data_block_error( 926 USBCCIDState *s, uint8_t slot, uint8_t seq) 927 { 928 ccid_write_data_block(s, slot, seq, NULL, 0); 929 } 930 931 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 932 { 933 uint32_t len; 934 935 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 936 DPRINTF(s, 1, 937 "usb-ccid: not sending apdu to client, no card connected\n"); 938 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 939 return; 940 } 941 len = le32_to_cpu(recv->hdr.dwLength); 942 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 943 recv->hdr.bSeq, len); 944 ccid_add_pending_answer(s, (CCID_Header *)recv); 945 if (s->card && len <= BULK_OUT_DATA_SIZE) { 946 ccid_card_apdu_from_guest(s->card, recv->abData, len); 947 } else { 948 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 949 } 950 } 951 952 static const char *ccid_message_type_to_str(uint8_t type) 953 { 954 switch (type) { 955 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 956 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 957 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 958 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 959 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 960 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 961 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 962 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 963 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 964 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 965 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 966 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 967 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 968 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 969 return "SetDataRateAndClockFrequency"; 970 } 971 return "unknown"; 972 } 973 974 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 975 { 976 CCID_Header *ccid_header; 977 978 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 979 goto err; 980 } 981 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 982 s->bulk_out_pos += p->iov.size; 983 if (s->bulk_out_pos < 10) { 984 DPRINTF(s, 1, "%s: header incomplete\n", __func__); 985 goto err; 986 } 987 988 ccid_header = (CCID_Header *)s->bulk_out_data; 989 if ((s->bulk_out_pos - 10 < ccid_header->dwLength) && 990 (p->iov.size == CCID_MAX_PACKET_SIZE)) { 991 DPRINTF(s, D_VERBOSE, 992 "usb-ccid: bulk_in: expecting more packets (%d/%d)\n", 993 s->bulk_out_pos - 10, ccid_header->dwLength); 994 return; 995 } 996 if (s->bulk_out_pos - 10 != ccid_header->dwLength) { 997 DPRINTF(s, 1, 998 "usb-ccid: bulk_in: message size mismatch (got %d, expected %d)\n", 999 s->bulk_out_pos - 10, ccid_header->dwLength); 1000 goto err; 1001 } 1002 1003 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1004 ccid_header->bMessageType, 1005 ccid_message_type_to_str(ccid_header->bMessageType)); 1006 switch (ccid_header->bMessageType) { 1007 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1008 ccid_write_slot_status(s, ccid_header); 1009 break; 1010 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1011 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1012 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1013 s->powered = true; 1014 if (!ccid_card_inserted(s)) { 1015 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1016 } 1017 /* atr is written regardless of error. */ 1018 ccid_write_data_block_atr(s, ccid_header); 1019 break; 1020 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1021 ccid_reset_error_status(s); 1022 s->powered = false; 1023 ccid_write_slot_status(s, ccid_header); 1024 break; 1025 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1026 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1027 break; 1028 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1029 ccid_reset_error_status(s); 1030 ccid_set_parameters(s, ccid_header); 1031 ccid_write_parameters(s, ccid_header); 1032 break; 1033 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1034 ccid_reset_error_status(s); 1035 ccid_reset_parameters(s); 1036 ccid_write_parameters(s, ccid_header); 1037 break; 1038 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1039 ccid_reset_error_status(s); 1040 ccid_write_parameters(s, ccid_header); 1041 break; 1042 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1043 ccid_report_error_failed(s, 0); 1044 ccid_write_slot_status(s, ccid_header); 1045 break; 1046 default: 1047 DPRINTF(s, 1, 1048 "handle_data: ERROR: unhandled message type %Xh\n", 1049 ccid_header->bMessageType); 1050 /* 1051 * The caller is expecting the device to respond, tell it we 1052 * don't support the operation. 1053 */ 1054 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1055 ccid_write_slot_status(s, ccid_header); 1056 break; 1057 } 1058 s->bulk_out_pos = 0; 1059 return; 1060 1061 err: 1062 p->status = USB_RET_STALL; 1063 s->bulk_out_pos = 0; 1064 return; 1065 } 1066 1067 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p, 1068 unsigned int max_packet_size) 1069 { 1070 int len = 0; 1071 1072 ccid_bulk_in_get(s); 1073 if (s->current_bulk_in != NULL) { 1074 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1075 p->iov.size); 1076 if (len) { 1077 usb_packet_copy(p, s->current_bulk_in->data + 1078 s->current_bulk_in->pos, len); 1079 } 1080 s->current_bulk_in->pos += len; 1081 if (s->current_bulk_in->pos == s->current_bulk_in->len 1082 && len != max_packet_size) { 1083 ccid_bulk_in_release(s); 1084 } 1085 } else { 1086 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1087 p->status = USB_RET_NAK; 1088 } 1089 if (len) { 1090 DPRINTF(s, D_MORE_INFO, 1091 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1092 __func__, p->iov.size, len); 1093 } 1094 if (len < p->iov.size) { 1095 DPRINTF(s, 1, 1096 "%s: returning short (EREMOTEIO) %d < %zd\n", 1097 __func__, len, p->iov.size); 1098 } 1099 } 1100 1101 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1102 { 1103 USBCCIDState *s = USB_CCID_DEV(dev); 1104 uint8_t buf[2]; 1105 1106 switch (p->pid) { 1107 case USB_TOKEN_OUT: 1108 ccid_handle_bulk_out(s, p); 1109 break; 1110 1111 case USB_TOKEN_IN: 1112 switch (p->ep->nr) { 1113 case CCID_BULK_IN_EP: 1114 ccid_bulk_in_copy_to_guest(s, p, dev->ep_ctl.max_packet_size); 1115 break; 1116 case CCID_INT_IN_EP: 1117 if (s->notify_slot_change) { 1118 /* page 56, RDR_to_PC_NotifySlotChange */ 1119 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1120 buf[1] = s->bmSlotICCState; 1121 usb_packet_copy(p, buf, 2); 1122 s->notify_slot_change = false; 1123 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1124 DPRINTF(s, D_INFO, 1125 "handle_data: int_in: notify_slot_change %X, " 1126 "requested len %zd\n", 1127 s->bmSlotICCState, p->iov.size); 1128 } else { 1129 p->status = USB_RET_NAK; 1130 } 1131 break; 1132 default: 1133 DPRINTF(s, 1, "Bad endpoint\n"); 1134 p->status = USB_RET_STALL; 1135 break; 1136 } 1137 break; 1138 default: 1139 DPRINTF(s, 1, "Bad token\n"); 1140 p->status = USB_RET_STALL; 1141 break; 1142 } 1143 } 1144 1145 static void ccid_unrealize(USBDevice *dev, Error **errp) 1146 { 1147 USBCCIDState *s = USB_CCID_DEV(dev); 1148 1149 ccid_bulk_in_clear(s); 1150 } 1151 1152 static void ccid_flush_pending_answers(USBCCIDState *s) 1153 { 1154 while (ccid_has_pending_answers(s)) { 1155 ccid_write_data_block_answer(s, NULL, 0); 1156 } 1157 } 1158 1159 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1160 { 1161 return s->pending_answers_num == 0 1162 ? NULL 1163 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1164 } 1165 1166 static Property ccid_props[] = { 1167 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1168 DEFINE_PROP_END_OF_LIST(), 1169 }; 1170 1171 #define TYPE_CCID_BUS "ccid-bus" 1172 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1173 1174 static const TypeInfo ccid_bus_info = { 1175 .name = TYPE_CCID_BUS, 1176 .parent = TYPE_BUS, 1177 .instance_size = sizeof(CCIDBus), 1178 }; 1179 1180 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1181 uint8_t *apdu, uint32_t len) 1182 { 1183 DeviceState *qdev = DEVICE(card); 1184 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1185 USBCCIDState *s = USB_CCID_DEV(dev); 1186 Answer *answer; 1187 1188 if (!ccid_has_pending_answers(s)) { 1189 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1190 return; 1191 } 1192 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1193 answer = ccid_peek_next_answer(s); 1194 if (answer == NULL) { 1195 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1196 ccid_report_error_failed(s, ERROR_HW_ERROR); 1197 return; 1198 } 1199 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1200 len, answer->seq, answer->slot); 1201 ccid_write_data_block_answer(s, apdu, len); 1202 } 1203 1204 void ccid_card_card_removed(CCIDCardState *card) 1205 { 1206 DeviceState *qdev = DEVICE(card); 1207 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1208 USBCCIDState *s = USB_CCID_DEV(dev); 1209 1210 ccid_on_slot_change(s, false); 1211 ccid_flush_pending_answers(s); 1212 ccid_reset(s); 1213 } 1214 1215 int ccid_card_ccid_attach(CCIDCardState *card) 1216 { 1217 DeviceState *qdev = DEVICE(card); 1218 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1219 USBCCIDState *s = USB_CCID_DEV(dev); 1220 1221 DPRINTF(s, 1, "CCID Attach\n"); 1222 return 0; 1223 } 1224 1225 void ccid_card_ccid_detach(CCIDCardState *card) 1226 { 1227 DeviceState *qdev = DEVICE(card); 1228 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1229 USBCCIDState *s = USB_CCID_DEV(dev); 1230 1231 DPRINTF(s, 1, "CCID Detach\n"); 1232 if (ccid_card_inserted(s)) { 1233 ccid_on_slot_change(s, false); 1234 } 1235 ccid_detach(s); 1236 } 1237 1238 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1239 { 1240 DeviceState *qdev = DEVICE(card); 1241 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1242 USBCCIDState *s = USB_CCID_DEV(dev); 1243 1244 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1245 s->last_answer_error = error; 1246 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1247 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1248 /* 1249 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1250 * so check that first to not trigger abort 1251 */ 1252 if (ccid_has_pending_answers(s)) { 1253 ccid_write_data_block_answer(s, NULL, 0); 1254 } 1255 } 1256 1257 void ccid_card_card_inserted(CCIDCardState *card) 1258 { 1259 DeviceState *qdev = DEVICE(card); 1260 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1261 USBCCIDState *s = USB_CCID_DEV(dev); 1262 1263 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1264 ccid_flush_pending_answers(s); 1265 ccid_on_slot_change(s, true); 1266 } 1267 1268 static void ccid_card_unrealize(DeviceState *qdev, Error **errp) 1269 { 1270 CCIDCardState *card = CCID_CARD(qdev); 1271 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1272 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1273 USBCCIDState *s = USB_CCID_DEV(dev); 1274 Error *local_err = NULL; 1275 1276 if (ccid_card_inserted(s)) { 1277 ccid_card_card_removed(card); 1278 } 1279 if (cc->unrealize) { 1280 cc->unrealize(card, &local_err); 1281 if (local_err != NULL) { 1282 error_propagate(errp, local_err); 1283 return; 1284 } 1285 } 1286 s->card = NULL; 1287 } 1288 1289 static void ccid_card_realize(DeviceState *qdev, Error **errp) 1290 { 1291 CCIDCardState *card = CCID_CARD(qdev); 1292 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 1293 USBDevice *dev = USB_DEVICE(qdev->parent_bus->parent); 1294 USBCCIDState *s = USB_CCID_DEV(dev); 1295 Error *local_err = NULL; 1296 1297 if (card->slot != 0) { 1298 error_setg(errp, "usb-ccid supports one slot, can't add %d", 1299 card->slot); 1300 return; 1301 } 1302 if (s->card != NULL) { 1303 error_setg(errp, "usb-ccid card already full, not adding"); 1304 return; 1305 } 1306 if (cc->realize) { 1307 cc->realize(card, &local_err); 1308 if (local_err != NULL) { 1309 error_propagate(errp, local_err); 1310 return; 1311 } 1312 } 1313 s->card = card; 1314 } 1315 1316 static void ccid_realize(USBDevice *dev, Error **errp) 1317 { 1318 USBCCIDState *s = USB_CCID_DEV(dev); 1319 1320 usb_desc_create_serial(dev); 1321 usb_desc_init(dev); 1322 qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), 1323 NULL); 1324 qbus_set_hotplug_handler(BUS(&s->bus), DEVICE(dev), &error_abort); 1325 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1326 s->bulk = usb_ep_get(dev, USB_TOKEN_IN, CCID_BULK_IN_EP); 1327 s->card = NULL; 1328 s->dev.speed = USB_SPEED_FULL; 1329 s->dev.speedmask = USB_SPEED_MASK_FULL; 1330 s->notify_slot_change = false; 1331 s->powered = true; 1332 s->pending_answers_num = 0; 1333 s->last_answer_error = 0; 1334 s->bulk_in_pending_start = 0; 1335 s->bulk_in_pending_end = 0; 1336 s->current_bulk_in = NULL; 1337 ccid_reset_error_status(s); 1338 s->bulk_out_pos = 0; 1339 ccid_reset_parameters(s); 1340 ccid_reset(s); 1341 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1342 } 1343 1344 static int ccid_post_load(void *opaque, int version_id) 1345 { 1346 USBCCIDState *s = opaque; 1347 1348 /* 1349 * This must be done after usb_device_attach, which sets state to ATTACHED, 1350 * while it must be DEFAULT in order to accept packets (like it is after 1351 * reset, but reset will reset our addr and call our reset handler which 1352 * may change state, and we don't want to do that when migrating). 1353 */ 1354 s->dev.state = s->state_vmstate; 1355 return 0; 1356 } 1357 1358 static int ccid_pre_save(void *opaque) 1359 { 1360 USBCCIDState *s = opaque; 1361 1362 s->state_vmstate = s->dev.state; 1363 1364 return 0; 1365 } 1366 1367 static VMStateDescription bulk_in_vmstate = { 1368 .name = "CCID BulkIn state", 1369 .version_id = 1, 1370 .minimum_version_id = 1, 1371 .fields = (VMStateField[]) { 1372 VMSTATE_BUFFER(data, BulkIn), 1373 VMSTATE_UINT32(len, BulkIn), 1374 VMSTATE_UINT32(pos, BulkIn), 1375 VMSTATE_END_OF_LIST() 1376 } 1377 }; 1378 1379 static VMStateDescription answer_vmstate = { 1380 .name = "CCID Answer state", 1381 .version_id = 1, 1382 .minimum_version_id = 1, 1383 .fields = (VMStateField[]) { 1384 VMSTATE_UINT8(slot, Answer), 1385 VMSTATE_UINT8(seq, Answer), 1386 VMSTATE_END_OF_LIST() 1387 } 1388 }; 1389 1390 static VMStateDescription usb_device_vmstate = { 1391 .name = "usb_device", 1392 .version_id = 1, 1393 .minimum_version_id = 1, 1394 .fields = (VMStateField[]) { 1395 VMSTATE_UINT8(addr, USBDevice), 1396 VMSTATE_BUFFER(setup_buf, USBDevice), 1397 VMSTATE_BUFFER(data_buf, USBDevice), 1398 VMSTATE_END_OF_LIST() 1399 } 1400 }; 1401 1402 static VMStateDescription ccid_vmstate = { 1403 .name = "usb-ccid", 1404 .version_id = 1, 1405 .minimum_version_id = 1, 1406 .post_load = ccid_post_load, 1407 .pre_save = ccid_pre_save, 1408 .fields = (VMStateField[]) { 1409 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1410 VMSTATE_UINT8(debug, USBCCIDState), 1411 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1412 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1413 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1414 VMSTATE_UINT8(powered, USBCCIDState), 1415 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1416 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1417 VMSTATE_UINT8(bError, USBCCIDState), 1418 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1419 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1420 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1421 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1422 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1423 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1424 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1425 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1426 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1427 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1428 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1429 VMSTATE_UNUSED(1), /* was migration_state */ 1430 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1431 VMSTATE_END_OF_LIST() 1432 } 1433 }; 1434 1435 static Property ccid_properties[] = { 1436 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1437 DEFINE_PROP_END_OF_LIST(), 1438 }; 1439 1440 static void ccid_class_initfn(ObjectClass *klass, void *data) 1441 { 1442 DeviceClass *dc = DEVICE_CLASS(klass); 1443 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1444 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1445 1446 uc->realize = ccid_realize; 1447 uc->product_desc = "QEMU USB CCID"; 1448 uc->usb_desc = &desc_ccid; 1449 uc->handle_reset = ccid_handle_reset; 1450 uc->handle_control = ccid_handle_control; 1451 uc->handle_data = ccid_handle_data; 1452 uc->unrealize = ccid_unrealize; 1453 dc->desc = "CCID Rev 1.1 smartcard reader"; 1454 dc->vmsd = &ccid_vmstate; 1455 dc->props = ccid_properties; 1456 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1457 hc->unplug = qdev_simple_device_unplug_cb; 1458 } 1459 1460 static const TypeInfo ccid_info = { 1461 .name = CCID_DEV_NAME, 1462 .parent = TYPE_USB_DEVICE, 1463 .instance_size = sizeof(USBCCIDState), 1464 .class_init = ccid_class_initfn, 1465 .interfaces = (InterfaceInfo[]) { 1466 { TYPE_HOTPLUG_HANDLER }, 1467 { } 1468 } 1469 }; 1470 1471 static void ccid_card_class_init(ObjectClass *klass, void *data) 1472 { 1473 DeviceClass *k = DEVICE_CLASS(klass); 1474 k->bus_type = TYPE_CCID_BUS; 1475 k->realize = ccid_card_realize; 1476 k->unrealize = ccid_card_unrealize; 1477 k->props = ccid_props; 1478 } 1479 1480 static const TypeInfo ccid_card_type_info = { 1481 .name = TYPE_CCID_CARD, 1482 .parent = TYPE_DEVICE, 1483 .instance_size = sizeof(CCIDCardState), 1484 .abstract = true, 1485 .class_size = sizeof(CCIDCardClass), 1486 .class_init = ccid_card_class_init, 1487 }; 1488 1489 static void ccid_register_types(void) 1490 { 1491 type_register_static(&ccid_bus_info); 1492 type_register_static(&ccid_card_type_info); 1493 type_register_static(&ccid_info); 1494 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1495 } 1496 1497 type_init(ccid_register_types) 1498