1 /* 2 * Copyright (C) 2011 Red Hat, Inc. 3 * 4 * CCID Device emulation 5 * 6 * Written by Alon Levy, with contributions from Robert Relyea. 7 * 8 * Based on usb-serial.c, see its copyright and attributions below. 9 * 10 * This work is licensed under the terms of the GNU GPL, version 2.1 or later. 11 * See the COPYING file in the top-level directory. 12 * ------- (original copyright & attribution for usb-serial.c below) -------- 13 * Copyright (c) 2006 CodeSourcery. 14 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 15 * Written by Paul Brook, reused for FTDI by Samuel Thibault, 16 */ 17 18 /* 19 * References: 20 * 21 * CCID Specification Revision 1.1 April 22nd 2005 22 * "Universal Serial Bus, Device Class: Smart Card" 23 * Specification for Integrated Circuit(s) Cards Interface Devices 24 * 25 * Endianness note: from the spec (1.3) 26 * "Fields that are larger than a byte are stored in little endian" 27 * 28 * KNOWN BUGS 29 * 1. remove/insert can sometimes result in removed state instead of inserted. 30 * This is a result of the following: 31 * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This can happen 32 * when a short packet is sent, as seen in uhci-usb.c, resulting from a urb 33 * from the guest requesting SPD and us returning a smaller packet. 34 * Not sure which messages trigger this. 35 */ 36 37 #include "qemu-common.h" 38 #include "qemu/error-report.h" 39 #include "hw/usb.h" 40 #include "hw/usb/desc.h" 41 #include "monitor/monitor.h" 42 43 #include "ccid.h" 44 45 #define DPRINTF(s, lvl, fmt, ...) \ 46 do { \ 47 if (lvl <= s->debug) { \ 48 printf("usb-ccid: " fmt , ## __VA_ARGS__); \ 49 } \ 50 } while (0) 51 52 #define D_WARN 1 53 #define D_INFO 2 54 #define D_MORE_INFO 3 55 #define D_VERBOSE 4 56 57 #define CCID_DEV_NAME "usb-ccid" 58 #define USB_CCID_DEV(obj) OBJECT_CHECK(USBCCIDState, (obj), CCID_DEV_NAME) 59 /* 60 * The two options for variable sized buffers: 61 * make them constant size, for large enough constant, 62 * or handle the migration complexity - VMState doesn't handle this case. 63 * sizes are expected never to be exceeded, unless guest misbehaves. 64 */ 65 #define BULK_OUT_DATA_SIZE 65536 66 #define PENDING_ANSWERS_NUM 128 67 68 #define BULK_IN_BUF_SIZE 384 69 #define BULK_IN_PENDING_NUM 8 70 71 #define CCID_MAX_PACKET_SIZE 64 72 73 #define CCID_CONTROL_ABORT 0x1 74 #define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2 75 #define CCID_CONTROL_GET_DATA_RATES 0x3 76 77 #define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID" 78 #define CCID_VENDOR_DESCRIPTION "QEMU" 79 #define CCID_INTERFACE_NAME "CCID Interface" 80 #define CCID_SERIAL_NUMBER_STRING "1" 81 /* 82 * Using Gemplus Vendor and Product id 83 * Effect on various drivers: 84 * usbccid.sys (winxp, others untested) is a class driver so it doesn't care. 85 * linux has a number of class drivers, but openct filters based on 86 * vendor/product (/etc/openct.conf under fedora), hence Gemplus. 87 */ 88 #define CCID_VENDOR_ID 0x08e6 89 #define CCID_PRODUCT_ID 0x4433 90 #define CCID_DEVICE_VERSION 0x0000 91 92 /* 93 * BULK_OUT messages from PC to Reader 94 * Defined in CCID Rev 1.1 6.1 (page 26) 95 */ 96 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62 97 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63 98 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65 99 #define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f 100 #define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c 101 #define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d 102 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61 103 #define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b 104 #define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e 105 #define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a 106 #define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69 107 #define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71 108 #define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72 109 #define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73 110 111 /* 112 * BULK_IN messages from Reader to PC 113 * Defined in CCID Rev 1.1 6.2 (page 48) 114 */ 115 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80 116 #define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81 117 #define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82 118 #define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83 119 #define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84 120 121 /* 122 * INTERRUPT_IN messages from Reader to PC 123 * Defined in CCID Rev 1.1 6.3 (page 56) 124 */ 125 #define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50 126 #define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51 127 128 /* 129 * Endpoints for CCID - addresses are up to us to decide. 130 * To support slot insertion and removal we must have an interrupt in ep 131 * in addition we need a bulk in and bulk out ep 132 * 5.2, page 20 133 */ 134 #define CCID_INT_IN_EP 1 135 #define CCID_BULK_IN_EP 2 136 #define CCID_BULK_OUT_EP 3 137 138 /* bmSlotICCState masks */ 139 #define SLOT_0_STATE_MASK 1 140 #define SLOT_0_CHANGED_MASK 2 141 142 /* Status codes that go in bStatus (see 6.2.6) */ 143 enum { 144 ICC_STATUS_PRESENT_ACTIVE = 0, 145 ICC_STATUS_PRESENT_INACTIVE, 146 ICC_STATUS_NOT_PRESENT 147 }; 148 149 enum { 150 COMMAND_STATUS_NO_ERROR = 0, 151 COMMAND_STATUS_FAILED, 152 COMMAND_STATUS_TIME_EXTENSION_REQUIRED 153 }; 154 155 /* Error codes that go in bError (see 6.2.6) */ 156 enum { 157 ERROR_CMD_NOT_SUPPORTED = 0, 158 ERROR_CMD_ABORTED = -1, 159 ERROR_ICC_MUTE = -2, 160 ERROR_XFR_PARITY_ERROR = -3, 161 ERROR_XFR_OVERRUN = -4, 162 ERROR_HW_ERROR = -5, 163 }; 164 165 /* 6.2.6 RDR_to_PC_SlotStatus definitions */ 166 enum { 167 CLOCK_STATUS_RUNNING = 0, 168 /* 169 * 0 - Clock Running, 1 - Clock stopped in State L, 2 - H, 170 * 3 - unknown state. rest are RFU 171 */ 172 }; 173 174 typedef struct QEMU_PACKED CCID_Header { 175 uint8_t bMessageType; 176 uint32_t dwLength; 177 uint8_t bSlot; 178 uint8_t bSeq; 179 } CCID_Header; 180 181 typedef struct QEMU_PACKED CCID_BULK_IN { 182 CCID_Header hdr; 183 uint8_t bStatus; /* Only used in BULK_IN */ 184 uint8_t bError; /* Only used in BULK_IN */ 185 } CCID_BULK_IN; 186 187 typedef struct QEMU_PACKED CCID_SlotStatus { 188 CCID_BULK_IN b; 189 uint8_t bClockStatus; 190 } CCID_SlotStatus; 191 192 typedef struct QEMU_PACKED CCID_T0ProtocolDataStructure { 193 uint8_t bmFindexDindex; 194 uint8_t bmTCCKST0; 195 uint8_t bGuardTimeT0; 196 uint8_t bWaitingIntegerT0; 197 uint8_t bClockStop; 198 } CCID_T0ProtocolDataStructure; 199 200 typedef struct QEMU_PACKED CCID_T1ProtocolDataStructure { 201 uint8_t bmFindexDindex; 202 uint8_t bmTCCKST1; 203 uint8_t bGuardTimeT1; 204 uint8_t bWaitingIntegerT1; 205 uint8_t bClockStop; 206 uint8_t bIFSC; 207 uint8_t bNadValue; 208 } CCID_T1ProtocolDataStructure; 209 210 typedef union CCID_ProtocolDataStructure { 211 CCID_T0ProtocolDataStructure t0; 212 CCID_T1ProtocolDataStructure t1; 213 uint8_t data[7]; /* must be = max(sizeof(t0), sizeof(t1)) */ 214 } CCID_ProtocolDataStructure; 215 216 typedef struct QEMU_PACKED CCID_Parameter { 217 CCID_BULK_IN b; 218 uint8_t bProtocolNum; 219 CCID_ProtocolDataStructure abProtocolDataStructure; 220 } CCID_Parameter; 221 222 typedef struct QEMU_PACKED CCID_DataBlock { 223 CCID_BULK_IN b; 224 uint8_t bChainParameter; 225 uint8_t abData[0]; 226 } CCID_DataBlock; 227 228 /* 6.1.4 PC_to_RDR_XfrBlock */ 229 typedef struct QEMU_PACKED CCID_XferBlock { 230 CCID_Header hdr; 231 uint8_t bBWI; /* Block Waiting Timeout */ 232 uint16_t wLevelParameter; /* XXX currently unused */ 233 uint8_t abData[0]; 234 } CCID_XferBlock; 235 236 typedef struct QEMU_PACKED CCID_IccPowerOn { 237 CCID_Header hdr; 238 uint8_t bPowerSelect; 239 uint16_t abRFU; 240 } CCID_IccPowerOn; 241 242 typedef struct QEMU_PACKED CCID_IccPowerOff { 243 CCID_Header hdr; 244 uint16_t abRFU; 245 } CCID_IccPowerOff; 246 247 typedef struct QEMU_PACKED CCID_SetParameters { 248 CCID_Header hdr; 249 uint8_t bProtocolNum; 250 uint16_t abRFU; 251 CCID_ProtocolDataStructure abProtocolDataStructure; 252 } CCID_SetParameters; 253 254 typedef struct CCID_Notify_Slot_Change { 255 uint8_t bMessageType; /* CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */ 256 uint8_t bmSlotICCState; 257 } CCID_Notify_Slot_Change; 258 259 /* used for DataBlock response to XferBlock */ 260 typedef struct Answer { 261 uint8_t slot; 262 uint8_t seq; 263 } Answer; 264 265 /* pending BULK_IN messages */ 266 typedef struct BulkIn { 267 uint8_t data[BULK_IN_BUF_SIZE]; 268 uint32_t len; 269 uint32_t pos; 270 } BulkIn; 271 272 enum { 273 MIGRATION_NONE, 274 MIGRATION_MIGRATED, 275 }; 276 277 typedef struct CCIDBus { 278 BusState qbus; 279 } CCIDBus; 280 281 /* 282 * powered - defaults to true, changed by PowerOn/PowerOff messages 283 */ 284 typedef struct USBCCIDState { 285 USBDevice dev; 286 USBEndpoint *intr; 287 CCIDBus bus; 288 CCIDCardState *card; 289 BulkIn bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */ 290 uint32_t bulk_in_pending_start; 291 uint32_t bulk_in_pending_end; /* first free */ 292 uint32_t bulk_in_pending_num; 293 BulkIn *current_bulk_in; 294 uint8_t bulk_out_data[BULK_OUT_DATA_SIZE]; 295 uint32_t bulk_out_pos; 296 uint64_t last_answer_error; 297 Answer pending_answers[PENDING_ANSWERS_NUM]; 298 uint32_t pending_answers_start; 299 uint32_t pending_answers_end; 300 uint32_t pending_answers_num; 301 uint8_t bError; 302 uint8_t bmCommandStatus; 303 uint8_t bProtocolNum; 304 CCID_ProtocolDataStructure abProtocolDataStructure; 305 uint32_t ulProtocolDataStructureSize; 306 uint32_t state_vmstate; 307 uint32_t migration_target_ip; 308 uint16_t migration_target_port; 309 uint8_t migration_state; 310 uint8_t bmSlotICCState; 311 uint8_t powered; 312 uint8_t notify_slot_change; 313 uint8_t debug; 314 } USBCCIDState; 315 316 /* 317 * CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9, 318 * "USB Device Framework", section 9.6.1, in the Universal Serial Bus 319 * Specification. 320 * 321 * This device implemented based on the spec and with an Athena Smart Card 322 * Reader as reference: 323 * 0dc3:1004 Athena Smartcard Solutions, Inc. 324 */ 325 326 static const uint8_t qemu_ccid_descriptor[] = { 327 /* Smart Card Device Class Descriptor */ 328 0x36, /* u8 bLength; */ 329 0x21, /* u8 bDescriptorType; Functional */ 330 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */ 331 0x00, /* 332 * u8 bMaxSlotIndex; The index of the highest available 333 * slot on this device. All slots are consecutive starting 334 * at 00h. 335 */ 336 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8 */ 337 338 0x00, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/ 339 0x01, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */ 340 /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */ 341 0xa0, 0x0f, 0x00, 0x00, 342 /* u32 dwMaximumClock; */ 343 0x00, 0x00, 0x01, 0x00, 344 0x00, /* u8 bNumClockSupported; * 345 * 0 means just the default and max. */ 346 /* u32 dwDataRate ;bps. 9600 == 00002580h */ 347 0x80, 0x25, 0x00, 0x00, 348 /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */ 349 0x00, 0xC2, 0x01, 0x00, 350 0x00, /* u8 bNumDataRatesSupported; 00 means all rates between 351 * default and max */ 352 /* u32 dwMaxIFSD; * 353 * maximum IFSD supported by CCID for protocol * 354 * T=1 (Maximum seen from various cards) */ 355 0xfe, 0x00, 0x00, 0x00, 356 /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C */ 357 0x00, 0x00, 0x00, 0x00, 358 /* u32 dwMechanical; 0 - no special characteristics. */ 359 0x00, 0x00, 0x00, 0x00, 360 /* 361 * u32 dwFeatures; 362 * 0 - No special characteristics 363 * + 2 Automatic parameter configuration based on ATR data 364 * + 4 Automatic activation of ICC on inserting 365 * + 8 Automatic ICC voltage selection 366 * + 10 Automatic ICC clock frequency change 367 * + 20 Automatic baud rate change 368 * + 40 Automatic parameters negotiation made by the CCID 369 * + 80 automatic PPS made by the CCID 370 * 100 CCID can set ICC in clock stop mode 371 * 200 NAD value other then 00 accepted (T=1 protocol) 372 * + 400 Automatic IFSD exchange as first exchange (T=1) 373 * One of the following only: 374 * + 10000 TPDU level exchanges with CCID 375 * 20000 Short APDU level exchange with CCID 376 * 40000 Short and Extended APDU level exchange with CCID 377 * 378 * 100000 USB Wake up signaling supported on card 379 * insertion and removal. Must set bit 5 in bmAttributes 380 * in Configuration descriptor if 100000 is set. 381 */ 382 0xfe, 0x04, 0x01, 0x00, 383 /* 384 * u32 dwMaxCCIDMessageLength; For extended APDU in 385 * [261 + 10 , 65544 + 10]. Otherwise the minimum is 386 * wMaxPacketSize of the Bulk-OUT endpoint 387 */ 388 0x12, 0x00, 0x01, 0x00, 389 0xFF, /* 390 * u8 bClassGetResponse; Significant only for CCID that 391 * offers an APDU level for exchanges. Indicates the 392 * default class value used by the CCID when it sends a 393 * Get Response command to perform the transportation of 394 * an APDU by T=0 protocol 395 * FFh indicates that the CCID echos the class of the APDU. 396 */ 397 0xFF, /* 398 * u8 bClassEnvelope; EAPDU only. Envelope command for 399 * T=0 400 */ 401 0x00, 0x00, /* 402 * u16 wLcdLayout; XXYY Number of lines (XX) and chars per 403 * line for LCD display used for PIN entry. 0000 - no LCD 404 */ 405 0x01, /* 406 * u8 bPINSupport; 01h PIN Verification, 407 * 02h PIN Modification 408 */ 409 0x01, /* u8 bMaxCCIDBusySlots; */ 410 }; 411 412 enum { 413 STR_MANUFACTURER = 1, 414 STR_PRODUCT, 415 STR_SERIALNUMBER, 416 STR_INTERFACE, 417 }; 418 419 static const USBDescStrings desc_strings = { 420 [STR_MANUFACTURER] = "QEMU", 421 [STR_PRODUCT] = "QEMU USB CCID", 422 [STR_SERIALNUMBER] = "1", 423 [STR_INTERFACE] = "CCID Interface", 424 }; 425 426 static const USBDescIface desc_iface0 = { 427 .bInterfaceNumber = 0, 428 .bNumEndpoints = 3, 429 .bInterfaceClass = USB_CLASS_CSCID, 430 .bInterfaceSubClass = USB_SUBCLASS_UNDEFINED, 431 .bInterfaceProtocol = 0x00, 432 .iInterface = STR_INTERFACE, 433 .ndesc = 1, 434 .descs = (USBDescOther[]) { 435 { 436 /* smartcard descriptor */ 437 .data = qemu_ccid_descriptor, 438 }, 439 }, 440 .eps = (USBDescEndpoint[]) { 441 { 442 .bEndpointAddress = USB_DIR_IN | CCID_INT_IN_EP, 443 .bmAttributes = USB_ENDPOINT_XFER_INT, 444 .bInterval = 255, 445 .wMaxPacketSize = 64, 446 },{ 447 .bEndpointAddress = USB_DIR_IN | CCID_BULK_IN_EP, 448 .bmAttributes = USB_ENDPOINT_XFER_BULK, 449 .wMaxPacketSize = 64, 450 },{ 451 .bEndpointAddress = USB_DIR_OUT | CCID_BULK_OUT_EP, 452 .bmAttributes = USB_ENDPOINT_XFER_BULK, 453 .wMaxPacketSize = 64, 454 }, 455 } 456 }; 457 458 static const USBDescDevice desc_device = { 459 .bcdUSB = 0x0110, 460 .bMaxPacketSize0 = 64, 461 .bNumConfigurations = 1, 462 .confs = (USBDescConfig[]) { 463 { 464 .bNumInterfaces = 1, 465 .bConfigurationValue = 1, 466 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 467 USB_CFG_ATT_WAKEUP, 468 .bMaxPower = 50, 469 .nif = 1, 470 .ifs = &desc_iface0, 471 }, 472 }, 473 }; 474 475 static const USBDesc desc_ccid = { 476 .id = { 477 .idVendor = CCID_VENDOR_ID, 478 .idProduct = CCID_PRODUCT_ID, 479 .bcdDevice = CCID_DEVICE_VERSION, 480 .iManufacturer = STR_MANUFACTURER, 481 .iProduct = STR_PRODUCT, 482 .iSerialNumber = STR_SERIALNUMBER, 483 }, 484 .full = &desc_device, 485 .str = desc_strings, 486 }; 487 488 static const uint8_t *ccid_card_get_atr(CCIDCardState *card, uint32_t *len) 489 { 490 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 491 492 if (cc->get_atr) { 493 return cc->get_atr(card, len); 494 } 495 return NULL; 496 } 497 498 static void ccid_card_apdu_from_guest(CCIDCardState *card, 499 const uint8_t *apdu, 500 uint32_t len) 501 { 502 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 503 504 if (cc->apdu_from_guest) { 505 cc->apdu_from_guest(card, apdu, len); 506 } 507 } 508 509 static int ccid_card_exitfn(CCIDCardState *card) 510 { 511 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 512 513 if (cc->exitfn) { 514 return cc->exitfn(card); 515 } 516 return 0; 517 } 518 519 static int ccid_card_initfn(CCIDCardState *card) 520 { 521 CCIDCardClass *cc = CCID_CARD_GET_CLASS(card); 522 523 if (cc->initfn) { 524 return cc->initfn(card); 525 } 526 return 0; 527 } 528 529 static bool ccid_has_pending_answers(USBCCIDState *s) 530 { 531 return s->pending_answers_num > 0; 532 } 533 534 static void ccid_clear_pending_answers(USBCCIDState *s) 535 { 536 s->pending_answers_num = 0; 537 s->pending_answers_start = 0; 538 s->pending_answers_end = 0; 539 } 540 541 static void ccid_print_pending_answers(USBCCIDState *s) 542 { 543 Answer *answer; 544 int i, count; 545 546 DPRINTF(s, D_VERBOSE, "usb-ccid: pending answers:"); 547 if (!ccid_has_pending_answers(s)) { 548 DPRINTF(s, D_VERBOSE, " empty\n"); 549 return; 550 } 551 for (i = s->pending_answers_start, count = s->pending_answers_num ; 552 count > 0; count--, i++) { 553 answer = &s->pending_answers[i % PENDING_ANSWERS_NUM]; 554 if (count == 1) { 555 DPRINTF(s, D_VERBOSE, "%d:%d\n", answer->slot, answer->seq); 556 } else { 557 DPRINTF(s, D_VERBOSE, "%d:%d,", answer->slot, answer->seq); 558 } 559 } 560 } 561 562 static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr) 563 { 564 Answer *answer; 565 566 assert(s->pending_answers_num < PENDING_ANSWERS_NUM); 567 s->pending_answers_num++; 568 answer = 569 &s->pending_answers[(s->pending_answers_end++) % PENDING_ANSWERS_NUM]; 570 answer->slot = hdr->bSlot; 571 answer->seq = hdr->bSeq; 572 ccid_print_pending_answers(s); 573 } 574 575 static void ccid_remove_pending_answer(USBCCIDState *s, 576 uint8_t *slot, uint8_t *seq) 577 { 578 Answer *answer; 579 580 assert(s->pending_answers_num > 0); 581 s->pending_answers_num--; 582 answer = 583 &s->pending_answers[(s->pending_answers_start++) % PENDING_ANSWERS_NUM]; 584 *slot = answer->slot; 585 *seq = answer->seq; 586 ccid_print_pending_answers(s); 587 } 588 589 static void ccid_bulk_in_clear(USBCCIDState *s) 590 { 591 s->bulk_in_pending_start = 0; 592 s->bulk_in_pending_end = 0; 593 s->bulk_in_pending_num = 0; 594 } 595 596 static void ccid_bulk_in_release(USBCCIDState *s) 597 { 598 assert(s->current_bulk_in != NULL); 599 s->current_bulk_in->pos = 0; 600 s->current_bulk_in = NULL; 601 } 602 603 static void ccid_bulk_in_get(USBCCIDState *s) 604 { 605 if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) { 606 return; 607 } 608 assert(s->bulk_in_pending_num > 0); 609 s->bulk_in_pending_num--; 610 s->current_bulk_in = 611 &s->bulk_in_pending[(s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM]; 612 } 613 614 static void *ccid_reserve_recv_buf(USBCCIDState *s, uint16_t len) 615 { 616 BulkIn *bulk_in; 617 618 DPRINTF(s, D_VERBOSE, "%s: QUEUE: reserve %d bytes\n", __func__, len); 619 620 /* look for an existing element */ 621 if (len > BULK_IN_BUF_SIZE) { 622 DPRINTF(s, D_WARN, "usb-ccid.c: %s: len larger then max (%d>%d). " 623 "discarding message.\n", 624 __func__, len, BULK_IN_BUF_SIZE); 625 return NULL; 626 } 627 if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) { 628 DPRINTF(s, D_WARN, "usb-ccid.c: %s: No free bulk_in buffers. " 629 "discarding message.\n", __func__); 630 return NULL; 631 } 632 bulk_in = 633 &s->bulk_in_pending[(s->bulk_in_pending_end++) % BULK_IN_PENDING_NUM]; 634 s->bulk_in_pending_num++; 635 bulk_in->len = len; 636 return bulk_in->data; 637 } 638 639 static void ccid_reset(USBCCIDState *s) 640 { 641 ccid_bulk_in_clear(s); 642 ccid_clear_pending_answers(s); 643 } 644 645 static void ccid_detach(USBCCIDState *s) 646 { 647 ccid_reset(s); 648 } 649 650 static void ccid_handle_reset(USBDevice *dev) 651 { 652 USBCCIDState *s = USB_CCID_DEV(dev); 653 654 DPRINTF(s, 1, "Reset\n"); 655 656 ccid_reset(s); 657 } 658 659 static const char *ccid_control_to_str(USBCCIDState *s, int request) 660 { 661 switch (request) { 662 /* generic - should be factored out if there are other debugees */ 663 case DeviceOutRequest | USB_REQ_SET_ADDRESS: 664 return "(generic) set address"; 665 case DeviceRequest | USB_REQ_GET_DESCRIPTOR: 666 return "(generic) get descriptor"; 667 case DeviceRequest | USB_REQ_GET_CONFIGURATION: 668 return "(generic) get configuration"; 669 case DeviceOutRequest | USB_REQ_SET_CONFIGURATION: 670 return "(generic) set configuration"; 671 case DeviceRequest | USB_REQ_GET_STATUS: 672 return "(generic) get status"; 673 case DeviceOutRequest | USB_REQ_CLEAR_FEATURE: 674 return "(generic) clear feature"; 675 case DeviceOutRequest | USB_REQ_SET_FEATURE: 676 return "(generic) set_feature"; 677 case InterfaceRequest | USB_REQ_GET_INTERFACE: 678 return "(generic) get interface"; 679 case InterfaceOutRequest | USB_REQ_SET_INTERFACE: 680 return "(generic) set interface"; 681 /* class requests */ 682 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 683 return "ABORT"; 684 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 685 return "GET_CLOCK_FREQUENCIES"; 686 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 687 return "GET_DATA_RATES"; 688 } 689 return "unknown"; 690 } 691 692 static void ccid_handle_control(USBDevice *dev, USBPacket *p, int request, 693 int value, int index, int length, uint8_t *data) 694 { 695 USBCCIDState *s = USB_CCID_DEV(dev); 696 int ret; 697 698 DPRINTF(s, 1, "%s: got control %s (%x), value %x\n", __func__, 699 ccid_control_to_str(s, request), request, value); 700 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 701 if (ret >= 0) { 702 return; 703 } 704 705 switch (request) { 706 /* Class specific requests. */ 707 case ClassInterfaceOutRequest | CCID_CONTROL_ABORT: 708 DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n"); 709 p->status = USB_RET_STALL; 710 break; 711 case ClassInterfaceRequest | CCID_CONTROL_GET_CLOCK_FREQUENCIES: 712 DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n"); 713 p->status = USB_RET_STALL; 714 break; 715 case ClassInterfaceRequest | CCID_CONTROL_GET_DATA_RATES: 716 DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n"); 717 p->status = USB_RET_STALL; 718 break; 719 default: 720 DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n", 721 request, value); 722 p->status = USB_RET_STALL; 723 break; 724 } 725 } 726 727 static bool ccid_card_inserted(USBCCIDState *s) 728 { 729 return s->bmSlotICCState & SLOT_0_STATE_MASK; 730 } 731 732 static uint8_t ccid_card_status(USBCCIDState *s) 733 { 734 return ccid_card_inserted(s) 735 ? (s->powered ? 736 ICC_STATUS_PRESENT_ACTIVE 737 : ICC_STATUS_PRESENT_INACTIVE 738 ) 739 : ICC_STATUS_NOT_PRESENT; 740 } 741 742 static uint8_t ccid_calc_status(USBCCIDState *s) 743 { 744 /* 745 * page 55, 6.2.6, calculation of bStatus from bmICCStatus and 746 * bmCommandStatus 747 */ 748 uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6); 749 DPRINTF(s, D_VERBOSE, "%s: status = %d\n", __func__, ret); 750 return ret; 751 } 752 753 static void ccid_reset_error_status(USBCCIDState *s) 754 { 755 s->bError = ERROR_CMD_NOT_SUPPORTED; 756 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 757 } 758 759 static void ccid_write_slot_status(USBCCIDState *s, CCID_Header *recv) 760 { 761 CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus)); 762 if (h == NULL) { 763 return; 764 } 765 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus; 766 h->b.hdr.dwLength = 0; 767 h->b.hdr.bSlot = recv->bSlot; 768 h->b.hdr.bSeq = recv->bSeq; 769 h->b.bStatus = ccid_calc_status(s); 770 h->b.bError = s->bError; 771 h->bClockStatus = CLOCK_STATUS_RUNNING; 772 ccid_reset_error_status(s); 773 } 774 775 static void ccid_write_parameters(USBCCIDState *s, CCID_Header *recv) 776 { 777 CCID_Parameter *h; 778 uint32_t len = s->ulProtocolDataStructureSize; 779 780 h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len); 781 if (h == NULL) { 782 return; 783 } 784 h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters; 785 h->b.hdr.dwLength = 0; 786 h->b.hdr.bSlot = recv->bSlot; 787 h->b.hdr.bSeq = recv->bSeq; 788 h->b.bStatus = ccid_calc_status(s); 789 h->b.bError = s->bError; 790 h->bProtocolNum = s->bProtocolNum; 791 h->abProtocolDataStructure = s->abProtocolDataStructure; 792 ccid_reset_error_status(s); 793 } 794 795 static void ccid_write_data_block(USBCCIDState *s, uint8_t slot, uint8_t seq, 796 const uint8_t *data, uint32_t len) 797 { 798 CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len); 799 800 if (p == NULL) { 801 return; 802 } 803 p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock; 804 p->b.hdr.dwLength = cpu_to_le32(len); 805 p->b.hdr.bSlot = slot; 806 p->b.hdr.bSeq = seq; 807 p->b.bStatus = ccid_calc_status(s); 808 p->b.bError = s->bError; 809 if (p->b.bError) { 810 DPRINTF(s, D_VERBOSE, "error %d\n", p->b.bError); 811 } 812 memcpy(p->abData, data, len); 813 ccid_reset_error_status(s); 814 } 815 816 static void ccid_report_error_failed(USBCCIDState *s, uint8_t error) 817 { 818 s->bmCommandStatus = COMMAND_STATUS_FAILED; 819 s->bError = error; 820 } 821 822 static void ccid_write_data_block_answer(USBCCIDState *s, 823 const uint8_t *data, uint32_t len) 824 { 825 uint8_t seq; 826 uint8_t slot; 827 828 if (!ccid_has_pending_answers(s)) { 829 DPRINTF(s, D_WARN, "error: no pending answer to return to guest\n"); 830 ccid_report_error_failed(s, ERROR_ICC_MUTE); 831 return; 832 } 833 ccid_remove_pending_answer(s, &slot, &seq); 834 ccid_write_data_block(s, slot, seq, data, len); 835 } 836 837 static uint8_t atr_get_protocol_num(const uint8_t *atr, uint32_t len) 838 { 839 int i; 840 841 if (len < 2 || !(atr[1] & 0x80)) { 842 /* too short or TD1 not included */ 843 return 0; /* T=0, default */ 844 } 845 i = 1 + !!(atr[1] & 0x10) + !!(atr[1] & 0x20) + !!(atr[1] & 0x40); 846 i += !!(atr[1] & 0x80); 847 return atr[i] & 0x0f; 848 } 849 850 static void ccid_write_data_block_atr(USBCCIDState *s, CCID_Header *recv) 851 { 852 const uint8_t *atr = NULL; 853 uint32_t len = 0; 854 uint8_t atr_protocol_num; 855 CCID_T0ProtocolDataStructure *t0 = &s->abProtocolDataStructure.t0; 856 CCID_T1ProtocolDataStructure *t1 = &s->abProtocolDataStructure.t1; 857 858 if (s->card) { 859 atr = ccid_card_get_atr(s->card, &len); 860 } 861 atr_protocol_num = atr_get_protocol_num(atr, len); 862 DPRINTF(s, D_VERBOSE, "%s: atr contains protocol=%d\n", __func__, 863 atr_protocol_num); 864 /* set parameters from ATR - see spec page 109 */ 865 s->bProtocolNum = (atr_protocol_num <= 1 ? atr_protocol_num 866 : s->bProtocolNum); 867 switch (atr_protocol_num) { 868 case 0: 869 /* TODO: unimplemented ATR T0 parameters */ 870 t0->bmFindexDindex = 0; 871 t0->bmTCCKST0 = 0; 872 t0->bGuardTimeT0 = 0; 873 t0->bWaitingIntegerT0 = 0; 874 t0->bClockStop = 0; 875 break; 876 case 1: 877 /* TODO: unimplemented ATR T1 parameters */ 878 t1->bmFindexDindex = 0; 879 t1->bmTCCKST1 = 0; 880 t1->bGuardTimeT1 = 0; 881 t1->bWaitingIntegerT1 = 0; 882 t1->bClockStop = 0; 883 t1->bIFSC = 0; 884 t1->bNadValue = 0; 885 break; 886 default: 887 DPRINTF(s, D_WARN, "%s: error: unsupported ATR protocol %d\n", 888 __func__, atr_protocol_num); 889 } 890 ccid_write_data_block(s, recv->bSlot, recv->bSeq, atr, len); 891 } 892 893 static void ccid_set_parameters(USBCCIDState *s, CCID_Header *recv) 894 { 895 CCID_SetParameters *ph = (CCID_SetParameters *) recv; 896 uint32_t protocol_num = ph->bProtocolNum & 3; 897 898 if (protocol_num != 0 && protocol_num != 1) { 899 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 900 return; 901 } 902 s->bProtocolNum = protocol_num; 903 s->abProtocolDataStructure = ph->abProtocolDataStructure; 904 } 905 906 /* 907 * must be 5 bytes for T=0, 7 bytes for T=1 908 * See page 52 909 */ 910 static const CCID_ProtocolDataStructure defaultProtocolDataStructure = { 911 .t1 = { 912 .bmFindexDindex = 0x77, 913 .bmTCCKST1 = 0x00, 914 .bGuardTimeT1 = 0x00, 915 .bWaitingIntegerT1 = 0x00, 916 .bClockStop = 0x00, 917 .bIFSC = 0xfe, 918 .bNadValue = 0x00, 919 } 920 }; 921 922 static void ccid_reset_parameters(USBCCIDState *s) 923 { 924 s->bProtocolNum = 0; /* T=0 */ 925 s->abProtocolDataStructure = defaultProtocolDataStructure; 926 } 927 928 /* NOTE: only a single slot is supported (SLOT_0) */ 929 static void ccid_on_slot_change(USBCCIDState *s, bool full) 930 { 931 /* RDR_to_PC_NotifySlotChange, 6.3.1 page 56 */ 932 uint8_t current = s->bmSlotICCState; 933 if (full) { 934 s->bmSlotICCState |= SLOT_0_STATE_MASK; 935 } else { 936 s->bmSlotICCState &= ~SLOT_0_STATE_MASK; 937 } 938 if (current != s->bmSlotICCState) { 939 s->bmSlotICCState |= SLOT_0_CHANGED_MASK; 940 } 941 s->notify_slot_change = true; 942 usb_wakeup(s->intr, 0); 943 } 944 945 static void ccid_write_data_block_error( 946 USBCCIDState *s, uint8_t slot, uint8_t seq) 947 { 948 ccid_write_data_block(s, slot, seq, NULL, 0); 949 } 950 951 static void ccid_on_apdu_from_guest(USBCCIDState *s, CCID_XferBlock *recv) 952 { 953 uint32_t len; 954 955 if (ccid_card_status(s) != ICC_STATUS_PRESENT_ACTIVE) { 956 DPRINTF(s, 1, 957 "usb-ccid: not sending apdu to client, no card connected\n"); 958 ccid_write_data_block_error(s, recv->hdr.bSlot, recv->hdr.bSeq); 959 return; 960 } 961 len = le32_to_cpu(recv->hdr.dwLength); 962 DPRINTF(s, 1, "%s: seq %d, len %d\n", __func__, 963 recv->hdr.bSeq, len); 964 ccid_add_pending_answer(s, (CCID_Header *)recv); 965 if (s->card) { 966 ccid_card_apdu_from_guest(s->card, recv->abData, len); 967 } else { 968 DPRINTF(s, D_WARN, "warning: discarded apdu\n"); 969 } 970 } 971 972 static const char *ccid_message_type_to_str(uint8_t type) 973 { 974 switch (type) { 975 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: return "IccPowerOn"; 976 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: return "IccPowerOff"; 977 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: return "GetSlotStatus"; 978 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: return "XfrBlock"; 979 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: return "GetParameters"; 980 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: return "ResetParameters"; 981 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: return "SetParameters"; 982 case CCID_MESSAGE_TYPE_PC_to_RDR_Escape: return "Escape"; 983 case CCID_MESSAGE_TYPE_PC_to_RDR_IccClock: return "IccClock"; 984 case CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU: return "T0APDU"; 985 case CCID_MESSAGE_TYPE_PC_to_RDR_Secure: return "Secure"; 986 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: return "Mechanical"; 987 case CCID_MESSAGE_TYPE_PC_to_RDR_Abort: return "Abort"; 988 case CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency: 989 return "SetDataRateAndClockFrequency"; 990 } 991 return "unknown"; 992 } 993 994 static void ccid_handle_bulk_out(USBCCIDState *s, USBPacket *p) 995 { 996 CCID_Header *ccid_header; 997 998 if (p->iov.size + s->bulk_out_pos > BULK_OUT_DATA_SIZE) { 999 p->status = USB_RET_STALL; 1000 return; 1001 } 1002 ccid_header = (CCID_Header *)s->bulk_out_data; 1003 usb_packet_copy(p, s->bulk_out_data + s->bulk_out_pos, p->iov.size); 1004 s->bulk_out_pos += p->iov.size; 1005 if (p->iov.size == CCID_MAX_PACKET_SIZE) { 1006 DPRINTF(s, D_VERBOSE, 1007 "usb-ccid: bulk_in: expecting more packets (%zd/%d)\n", 1008 p->iov.size, ccid_header->dwLength); 1009 return; 1010 } 1011 if (s->bulk_out_pos < 10) { 1012 DPRINTF(s, 1, 1013 "%s: bad USB_TOKEN_OUT length, should be at least 10 bytes\n", 1014 __func__); 1015 } else { 1016 DPRINTF(s, D_MORE_INFO, "%s %x %s\n", __func__, 1017 ccid_header->bMessageType, 1018 ccid_message_type_to_str(ccid_header->bMessageType)); 1019 switch (ccid_header->bMessageType) { 1020 case CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus: 1021 ccid_write_slot_status(s, ccid_header); 1022 break; 1023 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn: 1024 DPRINTF(s, 1, "%s: PowerOn: %d\n", __func__, 1025 ((CCID_IccPowerOn *)(ccid_header))->bPowerSelect); 1026 s->powered = true; 1027 if (!ccid_card_inserted(s)) { 1028 ccid_report_error_failed(s, ERROR_ICC_MUTE); 1029 } 1030 /* atr is written regardless of error. */ 1031 ccid_write_data_block_atr(s, ccid_header); 1032 break; 1033 case CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff: 1034 ccid_reset_error_status(s); 1035 s->powered = false; 1036 ccid_write_slot_status(s, ccid_header); 1037 break; 1038 case CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock: 1039 ccid_on_apdu_from_guest(s, (CCID_XferBlock *)s->bulk_out_data); 1040 break; 1041 case CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters: 1042 ccid_reset_error_status(s); 1043 ccid_set_parameters(s, ccid_header); 1044 ccid_write_parameters(s, ccid_header); 1045 break; 1046 case CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters: 1047 ccid_reset_error_status(s); 1048 ccid_reset_parameters(s); 1049 ccid_write_parameters(s, ccid_header); 1050 break; 1051 case CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters: 1052 ccid_reset_error_status(s); 1053 ccid_write_parameters(s, ccid_header); 1054 break; 1055 case CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical: 1056 ccid_report_error_failed(s, 0); 1057 ccid_write_slot_status(s, ccid_header); 1058 break; 1059 default: 1060 DPRINTF(s, 1, 1061 "handle_data: ERROR: unhandled message type %Xh\n", 1062 ccid_header->bMessageType); 1063 /* 1064 * The caller is expecting the device to respond, tell it we 1065 * don't support the operation. 1066 */ 1067 ccid_report_error_failed(s, ERROR_CMD_NOT_SUPPORTED); 1068 ccid_write_slot_status(s, ccid_header); 1069 break; 1070 } 1071 } 1072 s->bulk_out_pos = 0; 1073 } 1074 1075 static void ccid_bulk_in_copy_to_guest(USBCCIDState *s, USBPacket *p) 1076 { 1077 int len = 0; 1078 1079 ccid_bulk_in_get(s); 1080 if (s->current_bulk_in != NULL) { 1081 len = MIN(s->current_bulk_in->len - s->current_bulk_in->pos, 1082 p->iov.size); 1083 usb_packet_copy(p, s->current_bulk_in->data + 1084 s->current_bulk_in->pos, len); 1085 s->current_bulk_in->pos += len; 1086 if (s->current_bulk_in->pos == s->current_bulk_in->len) { 1087 ccid_bulk_in_release(s); 1088 } 1089 } else { 1090 /* return when device has no data - usb 2.0 spec Table 8-4 */ 1091 p->status = USB_RET_NAK; 1092 } 1093 if (len) { 1094 DPRINTF(s, D_MORE_INFO, 1095 "%s: %zd/%d req/act to guest (BULK_IN)\n", 1096 __func__, p->iov.size, len); 1097 } 1098 if (len < p->iov.size) { 1099 DPRINTF(s, 1, 1100 "%s: returning short (EREMOTEIO) %d < %zd\n", 1101 __func__, len, p->iov.size); 1102 } 1103 } 1104 1105 static void ccid_handle_data(USBDevice *dev, USBPacket *p) 1106 { 1107 USBCCIDState *s = USB_CCID_DEV(dev); 1108 uint8_t buf[2]; 1109 1110 switch (p->pid) { 1111 case USB_TOKEN_OUT: 1112 ccid_handle_bulk_out(s, p); 1113 break; 1114 1115 case USB_TOKEN_IN: 1116 switch (p->ep->nr) { 1117 case CCID_BULK_IN_EP: 1118 ccid_bulk_in_copy_to_guest(s, p); 1119 break; 1120 case CCID_INT_IN_EP: 1121 if (s->notify_slot_change) { 1122 /* page 56, RDR_to_PC_NotifySlotChange */ 1123 buf[0] = CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange; 1124 buf[1] = s->bmSlotICCState; 1125 usb_packet_copy(p, buf, 2); 1126 s->notify_slot_change = false; 1127 s->bmSlotICCState &= ~SLOT_0_CHANGED_MASK; 1128 DPRINTF(s, D_INFO, 1129 "handle_data: int_in: notify_slot_change %X, " 1130 "requested len %zd\n", 1131 s->bmSlotICCState, p->iov.size); 1132 } else { 1133 p->status = USB_RET_NAK; 1134 } 1135 break; 1136 default: 1137 DPRINTF(s, 1, "Bad endpoint\n"); 1138 p->status = USB_RET_STALL; 1139 break; 1140 } 1141 break; 1142 default: 1143 DPRINTF(s, 1, "Bad token\n"); 1144 p->status = USB_RET_STALL; 1145 break; 1146 } 1147 } 1148 1149 static void ccid_handle_destroy(USBDevice *dev) 1150 { 1151 USBCCIDState *s = USB_CCID_DEV(dev); 1152 1153 ccid_bulk_in_clear(s); 1154 } 1155 1156 static void ccid_flush_pending_answers(USBCCIDState *s) 1157 { 1158 while (ccid_has_pending_answers(s)) { 1159 ccid_write_data_block_answer(s, NULL, 0); 1160 } 1161 } 1162 1163 static Answer *ccid_peek_next_answer(USBCCIDState *s) 1164 { 1165 return s->pending_answers_num == 0 1166 ? NULL 1167 : &s->pending_answers[s->pending_answers_start % PENDING_ANSWERS_NUM]; 1168 } 1169 1170 static Property ccid_props[] = { 1171 DEFINE_PROP_UINT32("slot", struct CCIDCardState, slot, 0), 1172 DEFINE_PROP_END_OF_LIST(), 1173 }; 1174 1175 #define TYPE_CCID_BUS "ccid-bus" 1176 #define CCID_BUS(obj) OBJECT_CHECK(CCIDBus, (obj), TYPE_CCID_BUS) 1177 1178 static const TypeInfo ccid_bus_info = { 1179 .name = TYPE_CCID_BUS, 1180 .parent = TYPE_BUS, 1181 .instance_size = sizeof(CCIDBus), 1182 }; 1183 1184 void ccid_card_send_apdu_to_guest(CCIDCardState *card, 1185 uint8_t *apdu, uint32_t len) 1186 { 1187 DeviceState *qdev = DEVICE(card); 1188 USBDevice *dev = USB_DEVICE(qdev); 1189 USBCCIDState *s = USB_CCID_DEV(dev); 1190 Answer *answer; 1191 1192 if (!ccid_has_pending_answers(s)) { 1193 DPRINTF(s, 1, "CCID ERROR: got an APDU without pending answers\n"); 1194 return; 1195 } 1196 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1197 answer = ccid_peek_next_answer(s); 1198 if (answer == NULL) { 1199 DPRINTF(s, D_WARN, "%s: error: unexpected lack of answer\n", __func__); 1200 ccid_report_error_failed(s, ERROR_HW_ERROR); 1201 return; 1202 } 1203 DPRINTF(s, 1, "APDU returned to guest %d (answer seq %d, slot %d)\n", 1204 len, answer->seq, answer->slot); 1205 ccid_write_data_block_answer(s, apdu, len); 1206 } 1207 1208 void ccid_card_card_removed(CCIDCardState *card) 1209 { 1210 DeviceState *qdev = DEVICE(card); 1211 USBDevice *dev = USB_DEVICE(qdev); 1212 USBCCIDState *s = USB_CCID_DEV(dev); 1213 1214 ccid_on_slot_change(s, false); 1215 ccid_flush_pending_answers(s); 1216 ccid_reset(s); 1217 } 1218 1219 int ccid_card_ccid_attach(CCIDCardState *card) 1220 { 1221 DeviceState *qdev = DEVICE(card); 1222 USBDevice *dev = USB_DEVICE(qdev); 1223 USBCCIDState *s = USB_CCID_DEV(dev); 1224 1225 DPRINTF(s, 1, "CCID Attach\n"); 1226 if (s->migration_state == MIGRATION_MIGRATED) { 1227 s->migration_state = MIGRATION_NONE; 1228 } 1229 return 0; 1230 } 1231 1232 void ccid_card_ccid_detach(CCIDCardState *card) 1233 { 1234 DeviceState *qdev = DEVICE(card); 1235 USBDevice *dev = USB_DEVICE(qdev); 1236 USBCCIDState *s = USB_CCID_DEV(dev); 1237 1238 DPRINTF(s, 1, "CCID Detach\n"); 1239 if (ccid_card_inserted(s)) { 1240 ccid_on_slot_change(s, false); 1241 } 1242 ccid_detach(s); 1243 } 1244 1245 void ccid_card_card_error(CCIDCardState *card, uint64_t error) 1246 { 1247 DeviceState *qdev = DEVICE(card); 1248 USBDevice *dev = USB_DEVICE(qdev); 1249 USBCCIDState *s = USB_CCID_DEV(dev); 1250 1251 s->bmCommandStatus = COMMAND_STATUS_FAILED; 1252 s->last_answer_error = error; 1253 DPRINTF(s, 1, "VSC_Error: %" PRIX64 "\n", s->last_answer_error); 1254 /* TODO: these errors should be more verbose and propagated to the guest.*/ 1255 /* 1256 * We flush all pending answers on CardRemove message in ccid-card-passthru, 1257 * so check that first to not trigger abort 1258 */ 1259 if (ccid_has_pending_answers(s)) { 1260 ccid_write_data_block_answer(s, NULL, 0); 1261 } 1262 } 1263 1264 void ccid_card_card_inserted(CCIDCardState *card) 1265 { 1266 DeviceState *qdev = DEVICE(card); 1267 USBDevice *dev = USB_DEVICE(qdev); 1268 USBCCIDState *s = USB_CCID_DEV(dev); 1269 1270 s->bmCommandStatus = COMMAND_STATUS_NO_ERROR; 1271 ccid_flush_pending_answers(s); 1272 ccid_on_slot_change(s, true); 1273 } 1274 1275 static int ccid_card_exit(DeviceState *qdev) 1276 { 1277 int ret = 0; 1278 CCIDCardState *card = CCID_CARD(qdev); 1279 USBDevice *dev = USB_DEVICE(qdev); 1280 USBCCIDState *s = USB_CCID_DEV(dev); 1281 1282 if (ccid_card_inserted(s)) { 1283 ccid_card_card_removed(card); 1284 } 1285 ret = ccid_card_exitfn(card); 1286 s->card = NULL; 1287 return ret; 1288 } 1289 1290 static int ccid_card_init(DeviceState *qdev) 1291 { 1292 CCIDCardState *card = CCID_CARD(qdev); 1293 USBDevice *dev = USB_DEVICE(qdev); 1294 USBCCIDState *s = USB_CCID_DEV(dev); 1295 int ret = 0; 1296 1297 if (card->slot != 0) { 1298 error_report("Warning: usb-ccid supports one slot, can't add %d", 1299 card->slot); 1300 return -1; 1301 } 1302 if (s->card != NULL) { 1303 error_report("Warning: usb-ccid card already full, not adding"); 1304 return -1; 1305 } 1306 ret = ccid_card_initfn(card); 1307 if (ret == 0) { 1308 s->card = card; 1309 } 1310 return ret; 1311 } 1312 1313 static void ccid_realize(USBDevice *dev, Error **errp) 1314 { 1315 USBCCIDState *s = USB_CCID_DEV(dev); 1316 1317 usb_desc_create_serial(dev); 1318 usb_desc_init(dev); 1319 qbus_create_inplace(&s->bus, sizeof(s->bus), TYPE_CCID_BUS, DEVICE(dev), 1320 NULL); 1321 qbus_set_hotplug_handler(BUS(&s->bus), DEVICE(dev), &error_abort); 1322 s->intr = usb_ep_get(dev, USB_TOKEN_IN, CCID_INT_IN_EP); 1323 s->card = NULL; 1324 s->migration_state = MIGRATION_NONE; 1325 s->migration_target_ip = 0; 1326 s->migration_target_port = 0; 1327 s->dev.speed = USB_SPEED_FULL; 1328 s->dev.speedmask = USB_SPEED_MASK_FULL; 1329 s->notify_slot_change = false; 1330 s->powered = true; 1331 s->pending_answers_num = 0; 1332 s->last_answer_error = 0; 1333 s->bulk_in_pending_start = 0; 1334 s->bulk_in_pending_end = 0; 1335 s->current_bulk_in = NULL; 1336 ccid_reset_error_status(s); 1337 s->bulk_out_pos = 0; 1338 ccid_reset_parameters(s); 1339 ccid_reset(s); 1340 s->debug = parse_debug_env("QEMU_CCID_DEBUG", D_VERBOSE, s->debug); 1341 } 1342 1343 static int ccid_post_load(void *opaque, int version_id) 1344 { 1345 USBCCIDState *s = opaque; 1346 1347 /* 1348 * This must be done after usb_device_attach, which sets state to ATTACHED, 1349 * while it must be DEFAULT in order to accept packets (like it is after 1350 * reset, but reset will reset our addr and call our reset handler which 1351 * may change state, and we don't want to do that when migrating). 1352 */ 1353 s->dev.state = s->state_vmstate; 1354 return 0; 1355 } 1356 1357 static void ccid_pre_save(void *opaque) 1358 { 1359 USBCCIDState *s = opaque; 1360 1361 s->state_vmstate = s->dev.state; 1362 if (s->dev.attached) { 1363 /* 1364 * Migrating an open device, ignore reconnection CHR_EVENT to avoid an 1365 * erroneous detach. 1366 */ 1367 s->migration_state = MIGRATION_MIGRATED; 1368 } 1369 } 1370 1371 static VMStateDescription bulk_in_vmstate = { 1372 .name = "CCID BulkIn state", 1373 .version_id = 1, 1374 .minimum_version_id = 1, 1375 .fields = (VMStateField[]) { 1376 VMSTATE_BUFFER(data, BulkIn), 1377 VMSTATE_UINT32(len, BulkIn), 1378 VMSTATE_UINT32(pos, BulkIn), 1379 VMSTATE_END_OF_LIST() 1380 } 1381 }; 1382 1383 static VMStateDescription answer_vmstate = { 1384 .name = "CCID Answer state", 1385 .version_id = 1, 1386 .minimum_version_id = 1, 1387 .fields = (VMStateField[]) { 1388 VMSTATE_UINT8(slot, Answer), 1389 VMSTATE_UINT8(seq, Answer), 1390 VMSTATE_END_OF_LIST() 1391 } 1392 }; 1393 1394 static VMStateDescription usb_device_vmstate = { 1395 .name = "usb_device", 1396 .version_id = 1, 1397 .minimum_version_id = 1, 1398 .fields = (VMStateField[]) { 1399 VMSTATE_UINT8(addr, USBDevice), 1400 VMSTATE_BUFFER(setup_buf, USBDevice), 1401 VMSTATE_BUFFER(data_buf, USBDevice), 1402 VMSTATE_END_OF_LIST() 1403 } 1404 }; 1405 1406 static VMStateDescription ccid_vmstate = { 1407 .name = "usb-ccid", 1408 .version_id = 1, 1409 .minimum_version_id = 1, 1410 .post_load = ccid_post_load, 1411 .pre_save = ccid_pre_save, 1412 .fields = (VMStateField[]) { 1413 VMSTATE_STRUCT(dev, USBCCIDState, 1, usb_device_vmstate, USBDevice), 1414 VMSTATE_UINT8(debug, USBCCIDState), 1415 VMSTATE_BUFFER(bulk_out_data, USBCCIDState), 1416 VMSTATE_UINT32(bulk_out_pos, USBCCIDState), 1417 VMSTATE_UINT8(bmSlotICCState, USBCCIDState), 1418 VMSTATE_UINT8(powered, USBCCIDState), 1419 VMSTATE_UINT8(notify_slot_change, USBCCIDState), 1420 VMSTATE_UINT64(last_answer_error, USBCCIDState), 1421 VMSTATE_UINT8(bError, USBCCIDState), 1422 VMSTATE_UINT8(bmCommandStatus, USBCCIDState), 1423 VMSTATE_UINT8(bProtocolNum, USBCCIDState), 1424 VMSTATE_BUFFER(abProtocolDataStructure.data, USBCCIDState), 1425 VMSTATE_UINT32(ulProtocolDataStructureSize, USBCCIDState), 1426 VMSTATE_STRUCT_ARRAY(bulk_in_pending, USBCCIDState, 1427 BULK_IN_PENDING_NUM, 1, bulk_in_vmstate, BulkIn), 1428 VMSTATE_UINT32(bulk_in_pending_start, USBCCIDState), 1429 VMSTATE_UINT32(bulk_in_pending_end, USBCCIDState), 1430 VMSTATE_STRUCT_ARRAY(pending_answers, USBCCIDState, 1431 PENDING_ANSWERS_NUM, 1, answer_vmstate, Answer), 1432 VMSTATE_UINT32(pending_answers_num, USBCCIDState), 1433 VMSTATE_UINT8(migration_state, USBCCIDState), 1434 VMSTATE_UINT32(state_vmstate, USBCCIDState), 1435 VMSTATE_END_OF_LIST() 1436 } 1437 }; 1438 1439 static Property ccid_properties[] = { 1440 DEFINE_PROP_UINT8("debug", USBCCIDState, debug, 0), 1441 DEFINE_PROP_END_OF_LIST(), 1442 }; 1443 1444 static void ccid_class_initfn(ObjectClass *klass, void *data) 1445 { 1446 DeviceClass *dc = DEVICE_CLASS(klass); 1447 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 1448 HotplugHandlerClass *hc = HOTPLUG_HANDLER_CLASS(klass); 1449 1450 uc->realize = ccid_realize; 1451 uc->product_desc = "QEMU USB CCID"; 1452 uc->usb_desc = &desc_ccid; 1453 uc->handle_reset = ccid_handle_reset; 1454 uc->handle_control = ccid_handle_control; 1455 uc->handle_data = ccid_handle_data; 1456 uc->handle_destroy = ccid_handle_destroy; 1457 dc->desc = "CCID Rev 1.1 smartcard reader"; 1458 dc->vmsd = &ccid_vmstate; 1459 dc->props = ccid_properties; 1460 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 1461 hc->unplug = qdev_simple_device_unplug_cb; 1462 } 1463 1464 static const TypeInfo ccid_info = { 1465 .name = CCID_DEV_NAME, 1466 .parent = TYPE_USB_DEVICE, 1467 .instance_size = sizeof(USBCCIDState), 1468 .class_init = ccid_class_initfn, 1469 .interfaces = (InterfaceInfo[]) { 1470 { TYPE_HOTPLUG_HANDLER }, 1471 { } 1472 } 1473 }; 1474 1475 static void ccid_card_class_init(ObjectClass *klass, void *data) 1476 { 1477 DeviceClass *k = DEVICE_CLASS(klass); 1478 k->bus_type = TYPE_CCID_BUS; 1479 k->init = ccid_card_init; 1480 k->exit = ccid_card_exit; 1481 k->props = ccid_props; 1482 } 1483 1484 static const TypeInfo ccid_card_type_info = { 1485 .name = TYPE_CCID_CARD, 1486 .parent = TYPE_DEVICE, 1487 .instance_size = sizeof(CCIDCardState), 1488 .abstract = true, 1489 .class_size = sizeof(CCIDCardClass), 1490 .class_init = ccid_card_class_init, 1491 }; 1492 1493 static void ccid_register_types(void) 1494 { 1495 type_register_static(&ccid_bus_info); 1496 type_register_static(&ccid_card_type_info); 1497 type_register_static(&ccid_info); 1498 usb_legacy_register(CCID_DEV_NAME, "ccid", NULL); 1499 } 1500 1501 type_init(ccid_register_types) 1502