1 /* 2 * FTDI FT232BM Device emulation 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Copyright (c) 2008 Samuel Thibault <samuel.thibault@ens-lyon.org> 6 * Written by Paul Brook, reused for FTDI by Samuel Thibault 7 * 8 * This code is licensed under the LGPL. 9 */ 10 11 #include "qemu/osdep.h" 12 #include "qapi/error.h" 13 #include "qemu-common.h" 14 #include "qemu/cutils.h" 15 #include "qemu/error-report.h" 16 #include "hw/usb.h" 17 #include "hw/usb/desc.h" 18 #include "chardev/char-serial.h" 19 #include "chardev/char-fe.h" 20 21 //#define DEBUG_Serial 22 23 #ifdef DEBUG_Serial 24 #define DPRINTF(fmt, ...) \ 25 do { printf("usb-serial: " fmt , ## __VA_ARGS__); } while (0) 26 #else 27 #define DPRINTF(fmt, ...) do {} while(0) 28 #endif 29 30 #define RECV_BUF 384 31 32 /* Commands */ 33 #define FTDI_RESET 0 34 #define FTDI_SET_MDM_CTRL 1 35 #define FTDI_SET_FLOW_CTRL 2 36 #define FTDI_SET_BAUD 3 37 #define FTDI_SET_DATA 4 38 #define FTDI_GET_MDM_ST 5 39 #define FTDI_SET_EVENT_CHR 6 40 #define FTDI_SET_ERROR_CHR 7 41 #define FTDI_SET_LATENCY 9 42 #define FTDI_GET_LATENCY 10 43 44 #define DeviceOutVendor ((USB_DIR_OUT|USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8) 45 #define DeviceInVendor ((USB_DIR_IN |USB_TYPE_VENDOR|USB_RECIP_DEVICE)<<8) 46 47 /* RESET */ 48 49 #define FTDI_RESET_SIO 0 50 #define FTDI_RESET_RX 1 51 #define FTDI_RESET_TX 2 52 53 /* SET_MDM_CTRL */ 54 55 #define FTDI_DTR 1 56 #define FTDI_SET_DTR (FTDI_DTR << 8) 57 #define FTDI_RTS 2 58 #define FTDI_SET_RTS (FTDI_RTS << 8) 59 60 /* SET_FLOW_CTRL */ 61 62 #define FTDI_RTS_CTS_HS 1 63 #define FTDI_DTR_DSR_HS 2 64 #define FTDI_XON_XOFF_HS 4 65 66 /* SET_DATA */ 67 68 #define FTDI_PARITY (0x7 << 8) 69 #define FTDI_ODD (0x1 << 8) 70 #define FTDI_EVEN (0x2 << 8) 71 #define FTDI_MARK (0x3 << 8) 72 #define FTDI_SPACE (0x4 << 8) 73 74 #define FTDI_STOP (0x3 << 11) 75 #define FTDI_STOP1 (0x0 << 11) 76 #define FTDI_STOP15 (0x1 << 11) 77 #define FTDI_STOP2 (0x2 << 11) 78 79 /* GET_MDM_ST */ 80 /* TODO: should be sent every 40ms */ 81 #define FTDI_CTS (1<<4) // CTS line status 82 #define FTDI_DSR (1<<5) // DSR line status 83 #define FTDI_RI (1<<6) // RI line status 84 #define FTDI_RLSD (1<<7) // Receive Line Signal Detect 85 86 /* Status */ 87 88 #define FTDI_DR (1<<0) // Data Ready 89 #define FTDI_OE (1<<1) // Overrun Err 90 #define FTDI_PE (1<<2) // Parity Err 91 #define FTDI_FE (1<<3) // Framing Err 92 #define FTDI_BI (1<<4) // Break Interrupt 93 #define FTDI_THRE (1<<5) // Transmitter Holding Register 94 #define FTDI_TEMT (1<<6) // Transmitter Empty 95 #define FTDI_FIFO (1<<7) // Error in FIFO 96 97 typedef struct { 98 USBDevice dev; 99 uint8_t recv_buf[RECV_BUF]; 100 uint16_t recv_ptr; 101 uint16_t recv_used; 102 uint8_t event_chr; 103 uint8_t error_chr; 104 uint8_t event_trigger; 105 QEMUSerialSetParams params; 106 int latency; /* ms */ 107 CharBackend cs; 108 } USBSerialState; 109 110 #define TYPE_USB_SERIAL "usb-serial-dev" 111 #define USB_SERIAL_DEV(obj) OBJECT_CHECK(USBSerialState, (obj), TYPE_USB_SERIAL) 112 113 enum { 114 STR_MANUFACTURER = 1, 115 STR_PRODUCT_SERIAL, 116 STR_PRODUCT_BRAILLE, 117 STR_SERIALNUMBER, 118 }; 119 120 static const USBDescStrings desc_strings = { 121 [STR_MANUFACTURER] = "QEMU", 122 [STR_PRODUCT_SERIAL] = "QEMU USB SERIAL", 123 [STR_PRODUCT_BRAILLE] = "QEMU USB BAUM BRAILLE", 124 [STR_SERIALNUMBER] = "1", 125 }; 126 127 static const USBDescIface desc_iface0 = { 128 .bInterfaceNumber = 0, 129 .bNumEndpoints = 2, 130 .bInterfaceClass = 0xff, 131 .bInterfaceSubClass = 0xff, 132 .bInterfaceProtocol = 0xff, 133 .eps = (USBDescEndpoint[]) { 134 { 135 .bEndpointAddress = USB_DIR_IN | 0x01, 136 .bmAttributes = USB_ENDPOINT_XFER_BULK, 137 .wMaxPacketSize = 64, 138 },{ 139 .bEndpointAddress = USB_DIR_OUT | 0x02, 140 .bmAttributes = USB_ENDPOINT_XFER_BULK, 141 .wMaxPacketSize = 64, 142 }, 143 } 144 }; 145 146 static const USBDescDevice desc_device = { 147 .bcdUSB = 0x0200, 148 .bMaxPacketSize0 = 8, 149 .bNumConfigurations = 1, 150 .confs = (USBDescConfig[]) { 151 { 152 .bNumInterfaces = 1, 153 .bConfigurationValue = 1, 154 .bmAttributes = USB_CFG_ATT_ONE, 155 .bMaxPower = 50, 156 .nif = 1, 157 .ifs = &desc_iface0, 158 }, 159 }, 160 }; 161 162 static const USBDesc desc_serial = { 163 .id = { 164 .idVendor = 0x0403, 165 .idProduct = 0x6001, 166 .bcdDevice = 0x0400, 167 .iManufacturer = STR_MANUFACTURER, 168 .iProduct = STR_PRODUCT_SERIAL, 169 .iSerialNumber = STR_SERIALNUMBER, 170 }, 171 .full = &desc_device, 172 .str = desc_strings, 173 }; 174 175 static const USBDesc desc_braille = { 176 .id = { 177 .idVendor = 0x0403, 178 .idProduct = 0xfe72, 179 .bcdDevice = 0x0400, 180 .iManufacturer = STR_MANUFACTURER, 181 .iProduct = STR_PRODUCT_BRAILLE, 182 .iSerialNumber = STR_SERIALNUMBER, 183 }, 184 .full = &desc_device, 185 .str = desc_strings, 186 }; 187 188 static void usb_serial_reset(USBSerialState *s) 189 { 190 /* TODO: Set flow control to none */ 191 s->event_chr = 0x0d; 192 s->event_trigger = 0; 193 s->recv_ptr = 0; 194 s->recv_used = 0; 195 /* TODO: purge in char driver */ 196 } 197 198 static void usb_serial_handle_reset(USBDevice *dev) 199 { 200 USBSerialState *s = (USBSerialState *)dev; 201 202 DPRINTF("Reset\n"); 203 204 usb_serial_reset(s); 205 /* TODO: Reset char device, send BREAK? */ 206 } 207 208 static uint8_t usb_get_modem_lines(USBSerialState *s) 209 { 210 int flags; 211 uint8_t ret; 212 213 if (qemu_chr_fe_ioctl(&s->cs, 214 CHR_IOCTL_SERIAL_GET_TIOCM, &flags) == -ENOTSUP) { 215 return FTDI_CTS|FTDI_DSR|FTDI_RLSD; 216 } 217 218 ret = 0; 219 if (flags & CHR_TIOCM_CTS) 220 ret |= FTDI_CTS; 221 if (flags & CHR_TIOCM_DSR) 222 ret |= FTDI_DSR; 223 if (flags & CHR_TIOCM_RI) 224 ret |= FTDI_RI; 225 if (flags & CHR_TIOCM_CAR) 226 ret |= FTDI_RLSD; 227 228 return ret; 229 } 230 231 static void usb_serial_handle_control(USBDevice *dev, USBPacket *p, 232 int request, int value, int index, int length, uint8_t *data) 233 { 234 USBSerialState *s = (USBSerialState *)dev; 235 int ret; 236 237 DPRINTF("got control %x, value %x\n",request, value); 238 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 239 if (ret >= 0) { 240 return; 241 } 242 243 switch (request) { 244 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: 245 break; 246 247 /* Class specific requests. */ 248 case DeviceOutVendor | FTDI_RESET: 249 switch (value) { 250 case FTDI_RESET_SIO: 251 usb_serial_reset(s); 252 break; 253 case FTDI_RESET_RX: 254 s->recv_ptr = 0; 255 s->recv_used = 0; 256 /* TODO: purge from char device */ 257 break; 258 case FTDI_RESET_TX: 259 /* TODO: purge from char device */ 260 break; 261 } 262 break; 263 case DeviceOutVendor | FTDI_SET_MDM_CTRL: 264 { 265 static int flags; 266 qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_GET_TIOCM, &flags); 267 if (value & FTDI_SET_RTS) { 268 if (value & FTDI_RTS) 269 flags |= CHR_TIOCM_RTS; 270 else 271 flags &= ~CHR_TIOCM_RTS; 272 } 273 if (value & FTDI_SET_DTR) { 274 if (value & FTDI_DTR) 275 flags |= CHR_TIOCM_DTR; 276 else 277 flags &= ~CHR_TIOCM_DTR; 278 } 279 qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_TIOCM, &flags); 280 break; 281 } 282 case DeviceOutVendor | FTDI_SET_FLOW_CTRL: 283 /* TODO: ioctl */ 284 break; 285 case DeviceOutVendor | FTDI_SET_BAUD: { 286 static const int subdivisors8[8] = { 0, 4, 2, 1, 3, 5, 6, 7 }; 287 int subdivisor8 = subdivisors8[((value & 0xc000) >> 14) 288 | ((index & 1) << 2)]; 289 int divisor = value & 0x3fff; 290 291 /* chip special cases */ 292 if (divisor == 1 && subdivisor8 == 0) 293 subdivisor8 = 4; 294 if (divisor == 0 && subdivisor8 == 0) 295 divisor = 1; 296 297 s->params.speed = (48000000 / 2) / (8 * divisor + subdivisor8); 298 qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params); 299 break; 300 } 301 case DeviceOutVendor | FTDI_SET_DATA: 302 switch (value & FTDI_PARITY) { 303 case 0: 304 s->params.parity = 'N'; 305 break; 306 case FTDI_ODD: 307 s->params.parity = 'O'; 308 break; 309 case FTDI_EVEN: 310 s->params.parity = 'E'; 311 break; 312 default: 313 DPRINTF("unsupported parity %d\n", value & FTDI_PARITY); 314 goto fail; 315 } 316 switch (value & FTDI_STOP) { 317 case FTDI_STOP1: 318 s->params.stop_bits = 1; 319 break; 320 case FTDI_STOP2: 321 s->params.stop_bits = 2; 322 break; 323 default: 324 DPRINTF("unsupported stop bits %d\n", value & FTDI_STOP); 325 goto fail; 326 } 327 qemu_chr_fe_ioctl(&s->cs, CHR_IOCTL_SERIAL_SET_PARAMS, &s->params); 328 /* TODO: TX ON/OFF */ 329 break; 330 case DeviceInVendor | FTDI_GET_MDM_ST: 331 data[0] = usb_get_modem_lines(s) | 1; 332 data[1] = 0; 333 p->actual_length = 2; 334 break; 335 case DeviceOutVendor | FTDI_SET_EVENT_CHR: 336 /* TODO: handle it */ 337 s->event_chr = value; 338 break; 339 case DeviceOutVendor | FTDI_SET_ERROR_CHR: 340 /* TODO: handle it */ 341 s->error_chr = value; 342 break; 343 case DeviceOutVendor | FTDI_SET_LATENCY: 344 s->latency = value; 345 break; 346 case DeviceInVendor | FTDI_GET_LATENCY: 347 data[0] = s->latency; 348 p->actual_length = 1; 349 break; 350 default: 351 fail: 352 DPRINTF("got unsupported/bogus control %x, value %x\n", request, value); 353 p->status = USB_RET_STALL; 354 break; 355 } 356 } 357 358 static void usb_serial_handle_data(USBDevice *dev, USBPacket *p) 359 { 360 USBSerialState *s = (USBSerialState *)dev; 361 uint8_t devep = p->ep->nr; 362 struct iovec *iov; 363 uint8_t header[2]; 364 int i, first_len, len; 365 366 switch (p->pid) { 367 case USB_TOKEN_OUT: 368 if (devep != 2) 369 goto fail; 370 for (i = 0; i < p->iov.niov; i++) { 371 iov = p->iov.iov + i; 372 /* XXX this blocks entire thread. Rewrite to use 373 * qemu_chr_fe_write and background I/O callbacks */ 374 qemu_chr_fe_write_all(&s->cs, iov->iov_base, iov->iov_len); 375 } 376 p->actual_length = p->iov.size; 377 break; 378 379 case USB_TOKEN_IN: 380 if (devep != 1) 381 goto fail; 382 first_len = RECV_BUF - s->recv_ptr; 383 len = p->iov.size; 384 if (len <= 2) { 385 p->status = USB_RET_NAK; 386 break; 387 } 388 header[0] = usb_get_modem_lines(s) | 1; 389 /* We do not have the uart details */ 390 /* handle serial break */ 391 if (s->event_trigger && s->event_trigger & FTDI_BI) { 392 s->event_trigger &= ~FTDI_BI; 393 header[1] = FTDI_BI; 394 usb_packet_copy(p, header, 2); 395 break; 396 } else { 397 header[1] = 0; 398 } 399 len -= 2; 400 if (len > s->recv_used) 401 len = s->recv_used; 402 if (!len) { 403 p->status = USB_RET_NAK; 404 break; 405 } 406 if (first_len > len) 407 first_len = len; 408 usb_packet_copy(p, header, 2); 409 usb_packet_copy(p, s->recv_buf + s->recv_ptr, first_len); 410 if (len > first_len) 411 usb_packet_copy(p, s->recv_buf, len - first_len); 412 s->recv_used -= len; 413 s->recv_ptr = (s->recv_ptr + len) % RECV_BUF; 414 break; 415 416 default: 417 DPRINTF("Bad token\n"); 418 fail: 419 p->status = USB_RET_STALL; 420 break; 421 } 422 } 423 424 static int usb_serial_can_read(void *opaque) 425 { 426 USBSerialState *s = opaque; 427 428 if (!s->dev.attached) { 429 return 0; 430 } 431 return RECV_BUF - s->recv_used; 432 } 433 434 static void usb_serial_read(void *opaque, const uint8_t *buf, int size) 435 { 436 USBSerialState *s = opaque; 437 int first_size, start; 438 439 /* room in the buffer? */ 440 if (size > (RECV_BUF - s->recv_used)) 441 size = RECV_BUF - s->recv_used; 442 443 start = s->recv_ptr + s->recv_used; 444 if (start < RECV_BUF) { 445 /* copy data to end of buffer */ 446 first_size = RECV_BUF - start; 447 if (first_size > size) 448 first_size = size; 449 450 memcpy(s->recv_buf + start, buf, first_size); 451 452 /* wrap around to front if needed */ 453 if (size > first_size) 454 memcpy(s->recv_buf, buf + first_size, size - first_size); 455 } else { 456 start -= RECV_BUF; 457 memcpy(s->recv_buf + start, buf, size); 458 } 459 s->recv_used += size; 460 } 461 462 static void usb_serial_event(void *opaque, int event) 463 { 464 USBSerialState *s = opaque; 465 466 switch (event) { 467 case CHR_EVENT_BREAK: 468 s->event_trigger |= FTDI_BI; 469 break; 470 case CHR_EVENT_OPENED: 471 if (!s->dev.attached) { 472 usb_device_attach(&s->dev, &error_abort); 473 } 474 break; 475 case CHR_EVENT_CLOSED: 476 if (s->dev.attached) { 477 usb_device_detach(&s->dev); 478 } 479 break; 480 } 481 } 482 483 static void usb_serial_realize(USBDevice *dev, Error **errp) 484 { 485 USBSerialState *s = USB_SERIAL_DEV(dev); 486 Error *local_err = NULL; 487 488 usb_desc_create_serial(dev); 489 usb_desc_init(dev); 490 dev->auto_attach = 0; 491 492 if (!qemu_chr_fe_backend_connected(&s->cs)) { 493 error_setg(errp, "Property chardev is required"); 494 return; 495 } 496 497 usb_check_attach(dev, &local_err); 498 if (local_err) { 499 error_propagate(errp, local_err); 500 return; 501 } 502 503 qemu_chr_fe_set_handlers(&s->cs, usb_serial_can_read, usb_serial_read, 504 usb_serial_event, NULL, s, NULL, true); 505 usb_serial_handle_reset(dev); 506 507 if (qemu_chr_fe_backend_open(&s->cs) && !dev->attached) { 508 usb_device_attach(dev, &error_abort); 509 } 510 } 511 512 static USBDevice *usb_braille_init(USBBus *bus, const char *unused) 513 { 514 USBDevice *dev; 515 Chardev *cdrv; 516 517 cdrv = qemu_chr_new("braille", "braille"); 518 if (!cdrv) 519 return NULL; 520 521 dev = usb_create(bus, "usb-braille"); 522 qdev_prop_set_chr(&dev->qdev, "chardev", cdrv); 523 return dev; 524 } 525 526 static const VMStateDescription vmstate_usb_serial = { 527 .name = "usb-serial", 528 .unmigratable = 1, 529 }; 530 531 static Property serial_properties[] = { 532 DEFINE_PROP_CHR("chardev", USBSerialState, cs), 533 DEFINE_PROP_END_OF_LIST(), 534 }; 535 536 static void usb_serial_dev_class_init(ObjectClass *klass, void *data) 537 { 538 DeviceClass *dc = DEVICE_CLASS(klass); 539 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 540 541 uc->realize = usb_serial_realize; 542 uc->handle_reset = usb_serial_handle_reset; 543 uc->handle_control = usb_serial_handle_control; 544 uc->handle_data = usb_serial_handle_data; 545 dc->vmsd = &vmstate_usb_serial; 546 set_bit(DEVICE_CATEGORY_INPUT, dc->categories); 547 } 548 549 static const TypeInfo usb_serial_dev_type_info = { 550 .name = TYPE_USB_SERIAL, 551 .parent = TYPE_USB_DEVICE, 552 .instance_size = sizeof(USBSerialState), 553 .abstract = true, 554 .class_init = usb_serial_dev_class_init, 555 }; 556 557 static void usb_serial_class_initfn(ObjectClass *klass, void *data) 558 { 559 DeviceClass *dc = DEVICE_CLASS(klass); 560 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 561 562 uc->product_desc = "QEMU USB Serial"; 563 uc->usb_desc = &desc_serial; 564 dc->props = serial_properties; 565 } 566 567 static const TypeInfo serial_info = { 568 .name = "usb-serial", 569 .parent = TYPE_USB_SERIAL, 570 .class_init = usb_serial_class_initfn, 571 }; 572 573 static Property braille_properties[] = { 574 DEFINE_PROP_CHR("chardev", USBSerialState, cs), 575 DEFINE_PROP_END_OF_LIST(), 576 }; 577 578 static void usb_braille_class_initfn(ObjectClass *klass, void *data) 579 { 580 DeviceClass *dc = DEVICE_CLASS(klass); 581 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 582 583 uc->product_desc = "QEMU USB Braille"; 584 uc->usb_desc = &desc_braille; 585 dc->props = braille_properties; 586 } 587 588 static const TypeInfo braille_info = { 589 .name = "usb-braille", 590 .parent = TYPE_USB_SERIAL, 591 .class_init = usb_braille_class_initfn, 592 }; 593 594 static void usb_serial_register_types(void) 595 { 596 type_register_static(&usb_serial_dev_type_info); 597 type_register_static(&serial_info); 598 type_register_static(&braille_info); 599 usb_legacy_register("usb-braille", "braille", usb_braille_init); 600 } 601 602 type_init(usb_serial_register_types) 603