1 /* 2 * QEMU USB HUB emulation 3 * 4 * Copyright (c) 2005 Fabrice Bellard 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 #include "qemu/osdep.h" 25 #include "qapi/error.h" 26 #include "qemu-common.h" 27 #include "trace.h" 28 #include "hw/usb.h" 29 #include "hw/usb/desc.h" 30 #include "qemu/error-report.h" 31 32 #define NUM_PORTS 8 33 34 typedef struct USBHubPort { 35 USBPort port; 36 uint16_t wPortStatus; 37 uint16_t wPortChange; 38 } USBHubPort; 39 40 typedef struct USBHubState { 41 USBDevice dev; 42 USBEndpoint *intr; 43 USBHubPort ports[NUM_PORTS]; 44 } USBHubState; 45 46 #define TYPE_USB_HUB "usb-hub" 47 #define USB_HUB(obj) OBJECT_CHECK(USBHubState, (obj), TYPE_USB_HUB) 48 49 #define ClearHubFeature (0x2000 | USB_REQ_CLEAR_FEATURE) 50 #define ClearPortFeature (0x2300 | USB_REQ_CLEAR_FEATURE) 51 #define GetHubDescriptor (0xa000 | USB_REQ_GET_DESCRIPTOR) 52 #define GetHubStatus (0xa000 | USB_REQ_GET_STATUS) 53 #define GetPortStatus (0xa300 | USB_REQ_GET_STATUS) 54 #define SetHubFeature (0x2000 | USB_REQ_SET_FEATURE) 55 #define SetPortFeature (0x2300 | USB_REQ_SET_FEATURE) 56 57 #define PORT_STAT_CONNECTION 0x0001 58 #define PORT_STAT_ENABLE 0x0002 59 #define PORT_STAT_SUSPEND 0x0004 60 #define PORT_STAT_OVERCURRENT 0x0008 61 #define PORT_STAT_RESET 0x0010 62 #define PORT_STAT_POWER 0x0100 63 #define PORT_STAT_LOW_SPEED 0x0200 64 #define PORT_STAT_HIGH_SPEED 0x0400 65 #define PORT_STAT_TEST 0x0800 66 #define PORT_STAT_INDICATOR 0x1000 67 68 #define PORT_STAT_C_CONNECTION 0x0001 69 #define PORT_STAT_C_ENABLE 0x0002 70 #define PORT_STAT_C_SUSPEND 0x0004 71 #define PORT_STAT_C_OVERCURRENT 0x0008 72 #define PORT_STAT_C_RESET 0x0010 73 74 #define PORT_CONNECTION 0 75 #define PORT_ENABLE 1 76 #define PORT_SUSPEND 2 77 #define PORT_OVERCURRENT 3 78 #define PORT_RESET 4 79 #define PORT_POWER 8 80 #define PORT_LOWSPEED 9 81 #define PORT_HIGHSPEED 10 82 #define PORT_C_CONNECTION 16 83 #define PORT_C_ENABLE 17 84 #define PORT_C_SUSPEND 18 85 #define PORT_C_OVERCURRENT 19 86 #define PORT_C_RESET 20 87 #define PORT_TEST 21 88 #define PORT_INDICATOR 22 89 90 /* same as Linux kernel root hubs */ 91 92 enum { 93 STR_MANUFACTURER = 1, 94 STR_PRODUCT, 95 STR_SERIALNUMBER, 96 }; 97 98 static const USBDescStrings desc_strings = { 99 [STR_MANUFACTURER] = "QEMU", 100 [STR_PRODUCT] = "QEMU USB Hub", 101 [STR_SERIALNUMBER] = "314159", 102 }; 103 104 static const USBDescIface desc_iface_hub = { 105 .bInterfaceNumber = 0, 106 .bNumEndpoints = 1, 107 .bInterfaceClass = USB_CLASS_HUB, 108 .eps = (USBDescEndpoint[]) { 109 { 110 .bEndpointAddress = USB_DIR_IN | 0x01, 111 .bmAttributes = USB_ENDPOINT_XFER_INT, 112 .wMaxPacketSize = 1 + (NUM_PORTS + 7) / 8, 113 .bInterval = 0xff, 114 }, 115 } 116 }; 117 118 static const USBDescDevice desc_device_hub = { 119 .bcdUSB = 0x0110, 120 .bDeviceClass = USB_CLASS_HUB, 121 .bMaxPacketSize0 = 8, 122 .bNumConfigurations = 1, 123 .confs = (USBDescConfig[]) { 124 { 125 .bNumInterfaces = 1, 126 .bConfigurationValue = 1, 127 .bmAttributes = USB_CFG_ATT_ONE | USB_CFG_ATT_SELFPOWER | 128 USB_CFG_ATT_WAKEUP, 129 .nif = 1, 130 .ifs = &desc_iface_hub, 131 }, 132 }, 133 }; 134 135 static const USBDesc desc_hub = { 136 .id = { 137 .idVendor = 0x0409, 138 .idProduct = 0x55aa, 139 .bcdDevice = 0x0101, 140 .iManufacturer = STR_MANUFACTURER, 141 .iProduct = STR_PRODUCT, 142 .iSerialNumber = STR_SERIALNUMBER, 143 }, 144 .full = &desc_device_hub, 145 .str = desc_strings, 146 }; 147 148 static const uint8_t qemu_hub_hub_descriptor[] = 149 { 150 0x00, /* u8 bLength; patched in later */ 151 0x29, /* u8 bDescriptorType; Hub-descriptor */ 152 0x00, /* u8 bNbrPorts; (patched later) */ 153 0x0a, /* u16 wHubCharacteristics; */ 154 0x00, /* (per-port OC, no power switching) */ 155 0x01, /* u8 bPwrOn2pwrGood; 2ms */ 156 0x00 /* u8 bHubContrCurrent; 0 mA */ 157 158 /* DeviceRemovable and PortPwrCtrlMask patched in later */ 159 }; 160 161 static void usb_hub_attach(USBPort *port1) 162 { 163 USBHubState *s = port1->opaque; 164 USBHubPort *port = &s->ports[port1->index]; 165 166 trace_usb_hub_attach(s->dev.addr, port1->index + 1); 167 port->wPortStatus |= PORT_STAT_CONNECTION; 168 port->wPortChange |= PORT_STAT_C_CONNECTION; 169 if (port->port.dev->speed == USB_SPEED_LOW) { 170 port->wPortStatus |= PORT_STAT_LOW_SPEED; 171 } else { 172 port->wPortStatus &= ~PORT_STAT_LOW_SPEED; 173 } 174 usb_wakeup(s->intr, 0); 175 } 176 177 static void usb_hub_detach(USBPort *port1) 178 { 179 USBHubState *s = port1->opaque; 180 USBHubPort *port = &s->ports[port1->index]; 181 182 trace_usb_hub_detach(s->dev.addr, port1->index + 1); 183 usb_wakeup(s->intr, 0); 184 185 /* Let upstream know the device on this port is gone */ 186 s->dev.port->ops->child_detach(s->dev.port, port1->dev); 187 188 port->wPortStatus &= ~PORT_STAT_CONNECTION; 189 port->wPortChange |= PORT_STAT_C_CONNECTION; 190 if (port->wPortStatus & PORT_STAT_ENABLE) { 191 port->wPortStatus &= ~PORT_STAT_ENABLE; 192 port->wPortChange |= PORT_STAT_C_ENABLE; 193 } 194 usb_wakeup(s->intr, 0); 195 } 196 197 static void usb_hub_child_detach(USBPort *port1, USBDevice *child) 198 { 199 USBHubState *s = port1->opaque; 200 201 /* Pass along upstream */ 202 s->dev.port->ops->child_detach(s->dev.port, child); 203 } 204 205 static void usb_hub_wakeup(USBPort *port1) 206 { 207 USBHubState *s = port1->opaque; 208 USBHubPort *port = &s->ports[port1->index]; 209 210 if (port->wPortStatus & PORT_STAT_SUSPEND) { 211 port->wPortStatus &= ~PORT_STAT_SUSPEND; 212 port->wPortChange |= PORT_STAT_C_SUSPEND; 213 usb_wakeup(s->intr, 0); 214 } 215 } 216 217 static void usb_hub_complete(USBPort *port, USBPacket *packet) 218 { 219 USBHubState *s = port->opaque; 220 221 /* 222 * Just pass it along upstream for now. 223 * 224 * If we ever implement usb 2.0 split transactions this will 225 * become a little more complicated ... 226 * 227 * Can't use usb_packet_complete() here because packet->owner is 228 * cleared already, go call the ->complete() callback directly 229 * instead. 230 */ 231 s->dev.port->ops->complete(s->dev.port, packet); 232 } 233 234 static USBDevice *usb_hub_find_device(USBDevice *dev, uint8_t addr) 235 { 236 USBHubState *s = USB_HUB(dev); 237 USBHubPort *port; 238 USBDevice *downstream; 239 int i; 240 241 for (i = 0; i < NUM_PORTS; i++) { 242 port = &s->ports[i]; 243 if (!(port->wPortStatus & PORT_STAT_ENABLE)) { 244 continue; 245 } 246 downstream = usb_find_device(&port->port, addr); 247 if (downstream != NULL) { 248 return downstream; 249 } 250 } 251 return NULL; 252 } 253 254 static void usb_hub_handle_reset(USBDevice *dev) 255 { 256 USBHubState *s = USB_HUB(dev); 257 USBHubPort *port; 258 int i; 259 260 trace_usb_hub_reset(s->dev.addr); 261 for (i = 0; i < NUM_PORTS; i++) { 262 port = s->ports + i; 263 port->wPortStatus = PORT_STAT_POWER; 264 port->wPortChange = 0; 265 if (port->port.dev && port->port.dev->attached) { 266 port->wPortStatus |= PORT_STAT_CONNECTION; 267 port->wPortChange |= PORT_STAT_C_CONNECTION; 268 if (port->port.dev->speed == USB_SPEED_LOW) { 269 port->wPortStatus |= PORT_STAT_LOW_SPEED; 270 } 271 } 272 } 273 } 274 275 static const char *feature_name(int feature) 276 { 277 static const char *name[] = { 278 [PORT_CONNECTION] = "connection", 279 [PORT_ENABLE] = "enable", 280 [PORT_SUSPEND] = "suspend", 281 [PORT_OVERCURRENT] = "overcurrent", 282 [PORT_RESET] = "reset", 283 [PORT_POWER] = "power", 284 [PORT_LOWSPEED] = "lowspeed", 285 [PORT_HIGHSPEED] = "highspeed", 286 [PORT_C_CONNECTION] = "change connection", 287 [PORT_C_ENABLE] = "change enable", 288 [PORT_C_SUSPEND] = "change suspend", 289 [PORT_C_OVERCURRENT] = "change overcurrent", 290 [PORT_C_RESET] = "change reset", 291 [PORT_TEST] = "test", 292 [PORT_INDICATOR] = "indicator", 293 }; 294 if (feature < 0 || feature >= ARRAY_SIZE(name)) { 295 return "?"; 296 } 297 return name[feature] ?: "?"; 298 } 299 300 static void usb_hub_handle_control(USBDevice *dev, USBPacket *p, 301 int request, int value, int index, int length, uint8_t *data) 302 { 303 USBHubState *s = (USBHubState *)dev; 304 int ret; 305 306 trace_usb_hub_control(s->dev.addr, request, value, index, length); 307 308 ret = usb_desc_handle_control(dev, p, request, value, index, length, data); 309 if (ret >= 0) { 310 return; 311 } 312 313 switch(request) { 314 case EndpointOutRequest | USB_REQ_CLEAR_FEATURE: 315 if (value == 0 && index != 0x81) { /* clear ep halt */ 316 goto fail; 317 } 318 break; 319 /* usb specific requests */ 320 case GetHubStatus: 321 data[0] = 0; 322 data[1] = 0; 323 data[2] = 0; 324 data[3] = 0; 325 p->actual_length = 4; 326 break; 327 case GetPortStatus: 328 { 329 unsigned int n = index - 1; 330 USBHubPort *port; 331 if (n >= NUM_PORTS) { 332 goto fail; 333 } 334 port = &s->ports[n]; 335 trace_usb_hub_get_port_status(s->dev.addr, index, 336 port->wPortStatus, 337 port->wPortChange); 338 data[0] = port->wPortStatus; 339 data[1] = port->wPortStatus >> 8; 340 data[2] = port->wPortChange; 341 data[3] = port->wPortChange >> 8; 342 p->actual_length = 4; 343 } 344 break; 345 case SetHubFeature: 346 case ClearHubFeature: 347 if (value != 0 && value != 1) { 348 goto fail; 349 } 350 break; 351 case SetPortFeature: 352 { 353 unsigned int n = index - 1; 354 USBHubPort *port; 355 USBDevice *dev; 356 357 trace_usb_hub_set_port_feature(s->dev.addr, index, 358 feature_name(value)); 359 360 if (n >= NUM_PORTS) { 361 goto fail; 362 } 363 port = &s->ports[n]; 364 dev = port->port.dev; 365 switch(value) { 366 case PORT_SUSPEND: 367 port->wPortStatus |= PORT_STAT_SUSPEND; 368 break; 369 case PORT_RESET: 370 if (dev && dev->attached) { 371 usb_device_reset(dev); 372 port->wPortChange |= PORT_STAT_C_RESET; 373 /* set enable bit */ 374 port->wPortStatus |= PORT_STAT_ENABLE; 375 usb_wakeup(s->intr, 0); 376 } 377 break; 378 case PORT_POWER: 379 break; 380 default: 381 goto fail; 382 } 383 } 384 break; 385 case ClearPortFeature: 386 { 387 unsigned int n = index - 1; 388 USBHubPort *port; 389 390 trace_usb_hub_clear_port_feature(s->dev.addr, index, 391 feature_name(value)); 392 393 if (n >= NUM_PORTS) { 394 goto fail; 395 } 396 port = &s->ports[n]; 397 switch(value) { 398 case PORT_ENABLE: 399 port->wPortStatus &= ~PORT_STAT_ENABLE; 400 break; 401 case PORT_C_ENABLE: 402 port->wPortChange &= ~PORT_STAT_C_ENABLE; 403 break; 404 case PORT_SUSPEND: 405 if (port->wPortStatus & PORT_STAT_SUSPEND) { 406 port->wPortStatus &= ~PORT_STAT_SUSPEND; 407 408 /* 409 * USB Spec rev2.0 11.24.2.7.2.3 C_PORT_SUSPEND 410 * "This bit is set on the following transitions: 411 * - On transition from the Resuming state to the 412 * SendEOP [sic] state" 413 * 414 * Note that this includes both remote wake-up and 415 * explicit ClearPortFeature(PORT_SUSPEND). 416 */ 417 port->wPortChange |= PORT_STAT_C_SUSPEND; 418 } 419 break; 420 case PORT_C_SUSPEND: 421 port->wPortChange &= ~PORT_STAT_C_SUSPEND; 422 break; 423 case PORT_C_CONNECTION: 424 port->wPortChange &= ~PORT_STAT_C_CONNECTION; 425 break; 426 case PORT_C_OVERCURRENT: 427 port->wPortChange &= ~PORT_STAT_C_OVERCURRENT; 428 break; 429 case PORT_C_RESET: 430 port->wPortChange &= ~PORT_STAT_C_RESET; 431 break; 432 default: 433 goto fail; 434 } 435 } 436 break; 437 case GetHubDescriptor: 438 { 439 unsigned int n, limit, var_hub_size = 0; 440 memcpy(data, qemu_hub_hub_descriptor, 441 sizeof(qemu_hub_hub_descriptor)); 442 data[2] = NUM_PORTS; 443 444 /* fill DeviceRemovable bits */ 445 limit = ((NUM_PORTS + 1 + 7) / 8) + 7; 446 for (n = 7; n < limit; n++) { 447 data[n] = 0x00; 448 var_hub_size++; 449 } 450 451 /* fill PortPwrCtrlMask bits */ 452 limit = limit + ((NUM_PORTS + 7) / 8); 453 for (;n < limit; n++) { 454 data[n] = 0xff; 455 var_hub_size++; 456 } 457 458 p->actual_length = sizeof(qemu_hub_hub_descriptor) + var_hub_size; 459 data[0] = p->actual_length; 460 break; 461 } 462 default: 463 fail: 464 p->status = USB_RET_STALL; 465 break; 466 } 467 } 468 469 static void usb_hub_handle_data(USBDevice *dev, USBPacket *p) 470 { 471 USBHubState *s = (USBHubState *)dev; 472 473 switch(p->pid) { 474 case USB_TOKEN_IN: 475 if (p->ep->nr == 1) { 476 USBHubPort *port; 477 unsigned int status; 478 uint8_t buf[4]; 479 int i, n; 480 n = (NUM_PORTS + 1 + 7) / 8; 481 if (p->iov.size == 1) { /* FreeBSD workaround */ 482 n = 1; 483 } else if (n > p->iov.size) { 484 p->status = USB_RET_BABBLE; 485 return; 486 } 487 status = 0; 488 for(i = 0; i < NUM_PORTS; i++) { 489 port = &s->ports[i]; 490 if (port->wPortChange) 491 status |= (1 << (i + 1)); 492 } 493 if (status != 0) { 494 trace_usb_hub_status_report(s->dev.addr, status); 495 for(i = 0; i < n; i++) { 496 buf[i] = status >> (8 * i); 497 } 498 usb_packet_copy(p, buf, n); 499 } else { 500 p->status = USB_RET_NAK; /* usb11 11.13.1 */ 501 } 502 } else { 503 goto fail; 504 } 505 break; 506 case USB_TOKEN_OUT: 507 default: 508 fail: 509 p->status = USB_RET_STALL; 510 break; 511 } 512 } 513 514 static void usb_hub_unrealize(USBDevice *dev, Error **errp) 515 { 516 USBHubState *s = (USBHubState *)dev; 517 int i; 518 519 for (i = 0; i < NUM_PORTS; i++) { 520 usb_unregister_port(usb_bus_from_device(dev), 521 &s->ports[i].port); 522 } 523 } 524 525 static USBPortOps usb_hub_port_ops = { 526 .attach = usb_hub_attach, 527 .detach = usb_hub_detach, 528 .child_detach = usb_hub_child_detach, 529 .wakeup = usb_hub_wakeup, 530 .complete = usb_hub_complete, 531 }; 532 533 static void usb_hub_realize(USBDevice *dev, Error **errp) 534 { 535 USBHubState *s = USB_HUB(dev); 536 USBHubPort *port; 537 int i; 538 539 if (dev->port->hubcount == 5) { 540 error_setg(errp, "usb hub chain too deep"); 541 return; 542 } 543 544 usb_desc_create_serial(dev); 545 usb_desc_init(dev); 546 s->intr = usb_ep_get(dev, USB_TOKEN_IN, 1); 547 for (i = 0; i < NUM_PORTS; i++) { 548 port = &s->ports[i]; 549 usb_register_port(usb_bus_from_device(dev), 550 &port->port, s, i, &usb_hub_port_ops, 551 USB_SPEED_MASK_LOW | USB_SPEED_MASK_FULL); 552 usb_port_location(&port->port, dev->port, i+1); 553 } 554 usb_hub_handle_reset(dev); 555 } 556 557 static const VMStateDescription vmstate_usb_hub_port = { 558 .name = "usb-hub-port", 559 .version_id = 1, 560 .minimum_version_id = 1, 561 .fields = (VMStateField[]) { 562 VMSTATE_UINT16(wPortStatus, USBHubPort), 563 VMSTATE_UINT16(wPortChange, USBHubPort), 564 VMSTATE_END_OF_LIST() 565 } 566 }; 567 568 static const VMStateDescription vmstate_usb_hub = { 569 .name = "usb-hub", 570 .version_id = 1, 571 .minimum_version_id = 1, 572 .fields = (VMStateField[]) { 573 VMSTATE_USB_DEVICE(dev, USBHubState), 574 VMSTATE_STRUCT_ARRAY(ports, USBHubState, NUM_PORTS, 0, 575 vmstate_usb_hub_port, USBHubPort), 576 VMSTATE_END_OF_LIST() 577 } 578 }; 579 580 static void usb_hub_class_initfn(ObjectClass *klass, void *data) 581 { 582 DeviceClass *dc = DEVICE_CLASS(klass); 583 USBDeviceClass *uc = USB_DEVICE_CLASS(klass); 584 585 uc->realize = usb_hub_realize; 586 uc->product_desc = "QEMU USB Hub"; 587 uc->usb_desc = &desc_hub; 588 uc->find_device = usb_hub_find_device; 589 uc->handle_reset = usb_hub_handle_reset; 590 uc->handle_control = usb_hub_handle_control; 591 uc->handle_data = usb_hub_handle_data; 592 uc->unrealize = usb_hub_unrealize; 593 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 594 dc->fw_name = "hub"; 595 dc->vmsd = &vmstate_usb_hub; 596 } 597 598 static const TypeInfo hub_info = { 599 .name = TYPE_USB_HUB, 600 .parent = TYPE_USB_DEVICE, 601 .instance_size = sizeof(USBHubState), 602 .class_init = usb_hub_class_initfn, 603 }; 604 605 static void usb_hub_register_types(void) 606 { 607 type_register_static(&hub_info); 608 } 609 610 type_init(usb_hub_register_types) 611