xref: /openbmc/qemu/hw/tpm/tpm_tis_i2c.c (revision d5be19f5)
1 /*
2  * tpm_tis_i2c.c - QEMU's TPM TIS I2C Device
3  *
4  * Copyright (c) 2023 IBM Corporation
5  *
6  * Authors:
7  *   Ninad Palsule <ninad@linux.ibm.com>
8  *
9  * This work is licensed under the terms of the GNU GPL, version 2 or later.
10  * See the COPYING file in the top-level directory.
11  *
12  * TPM I2C implementation follows TCG TPM I2c Interface specification,
13  * Family 2.0, Level 00, Revision 1.00
14  *
15  * TPM TIS for TPM 2 implementation following TCG PC Client Platform
16  * TPM Profile (PTP) Specification, Family 2.0, Revision 00.43
17  *
18  */
19 
20 #include "qemu/osdep.h"
21 #include "hw/i2c/i2c.h"
22 #include "hw/sysbus.h"
23 #include "hw/acpi/tpm.h"
24 #include "migration/vmstate.h"
25 #include "tpm_prop.h"
26 #include "qemu/log.h"
27 #include "trace.h"
28 #include "tpm_tis.h"
29 
30 /* Operations */
31 #define OP_SEND   1
32 #define OP_RECV   2
33 
34 /* Is locality valid */
35 #define TPM_TIS_I2C_IS_VALID_LOCTY(x)   TPM_TIS_IS_VALID_LOCTY(x)
36 
37 typedef struct TPMStateI2C {
38     /*< private >*/
39     I2CSlave    parent_obj;
40 
41     uint8_t     offset;       /* offset into data[] */
42     uint8_t     operation;    /* OP_SEND & OP_RECV */
43     uint8_t     data[5];      /* Data */
44 
45     /* i2c registers */
46     uint8_t     loc_sel;      /* Current locality */
47     uint8_t     csum_enable;  /* Is checksum enabled */
48 
49     /* Derived from the above */
50     const char *reg_name;     /* Register name */
51     uint32_t    tis_addr;     /* Converted tis address including locty */
52 
53     /*< public >*/
54     TPMState    state; /* not a QOM object */
55 
56 } TPMStateI2C;
57 
58 DECLARE_INSTANCE_CHECKER(TPMStateI2C, TPM_TIS_I2C,
59                          TYPE_TPM_TIS_I2C)
60 
61 /* Prototype */
62 static inline void tpm_tis_i2c_to_tis_reg(TPMStateI2C *i2cst, uint8_t i2c_reg);
63 
64 /* Register map */
65 typedef struct regMap {
66     uint8_t   i2c_reg;    /* I2C register */
67     uint16_t  tis_reg;    /* TIS register */
68     const char *reg_name; /* Register name */
69 } I2CRegMap;
70 
71 /*
72  * The register values in the common code is different than the latest
73  * register numbers as per the spec hence add the conversion map
74  */
75 static const I2CRegMap tpm_tis_reg_map[] = {
76     /*
77      * These registers are sent to TIS layer. The register with UNKNOWN
78      * mapping are not sent to TIS layer and handled in I2c layer.
79      * NOTE: Adding frequently used registers at the start
80      */
81     { TPM_I2C_REG_DATA_FIFO,        TPM_TIS_REG_DATA_FIFO,       "FIFO",      },
82     { TPM_I2C_REG_STS,              TPM_TIS_REG_STS,             "STS",       },
83     { TPM_I2C_REG_DATA_CSUM_GET,    TPM_I2C_REG_UNKNOWN,         "CSUM_GET",  },
84     { TPM_I2C_REG_LOC_SEL,          TPM_I2C_REG_UNKNOWN,         "LOC_SEL",   },
85     { TPM_I2C_REG_ACCESS,           TPM_TIS_REG_ACCESS,          "ACCESS",    },
86     { TPM_I2C_REG_INT_ENABLE,       TPM_TIS_REG_INT_ENABLE,     "INTR_ENABLE",},
87     { TPM_I2C_REG_INT_CAPABILITY,   TPM_I2C_REG_UNKNOWN,         "INTR_CAP",  },
88     { TPM_I2C_REG_INTF_CAPABILITY,  TPM_TIS_REG_INTF_CAPABILITY, "INTF_CAP",  },
89     { TPM_I2C_REG_DID_VID,          TPM_TIS_REG_DID_VID,         "DID_VID",   },
90     { TPM_I2C_REG_RID,              TPM_TIS_REG_RID,             "RID",       },
91     { TPM_I2C_REG_I2C_DEV_ADDRESS,  TPM_I2C_REG_UNKNOWN,        "DEV_ADDRESS",},
92     { TPM_I2C_REG_DATA_CSUM_ENABLE, TPM_I2C_REG_UNKNOWN,        "CSUM_ENABLE",},
93 };
94 
95 static int tpm_tis_i2c_pre_save(void *opaque)
96 {
97     TPMStateI2C *i2cst = opaque;
98 
99     return tpm_tis_pre_save(&i2cst->state);
100 }
101 
102 static int tpm_tis_i2c_post_load(void *opaque, int version_id)
103 {
104     TPMStateI2C *i2cst = opaque;
105 
106     if (i2cst->offset >= 1) {
107         tpm_tis_i2c_to_tis_reg(i2cst, i2cst->data[0]);
108     }
109 
110     return 0;
111 }
112 
113 static const VMStateDescription vmstate_tpm_tis_i2c = {
114     .name = "tpm-tis-i2c",
115     .version_id = 0,
116     .pre_save  = tpm_tis_i2c_pre_save,
117     .post_load  = tpm_tis_i2c_post_load,
118     .fields = (const VMStateField[]) {
119         VMSTATE_BUFFER(state.buffer, TPMStateI2C),
120         VMSTATE_UINT16(state.rw_offset, TPMStateI2C),
121         VMSTATE_UINT8(state.active_locty, TPMStateI2C),
122         VMSTATE_UINT8(state.aborting_locty, TPMStateI2C),
123         VMSTATE_UINT8(state.next_locty, TPMStateI2C),
124 
125         VMSTATE_STRUCT_ARRAY(state.loc, TPMStateI2C, TPM_TIS_NUM_LOCALITIES, 0,
126                              vmstate_locty, TPMLocality),
127 
128         /* i2c specifics */
129         VMSTATE_UINT8(offset, TPMStateI2C),
130         VMSTATE_UINT8(operation, TPMStateI2C),
131         VMSTATE_BUFFER(data, TPMStateI2C),
132         VMSTATE_UINT8(loc_sel, TPMStateI2C),
133         VMSTATE_UINT8(csum_enable, TPMStateI2C),
134 
135         VMSTATE_END_OF_LIST()
136     }
137 };
138 
139 /*
140  * Set data value. The i2cst->offset is not updated as called in
141  * the read path.
142  */
143 static void tpm_tis_i2c_set_data(TPMStateI2C *i2cst, uint32_t data)
144 {
145     i2cst->data[1] = data;
146     i2cst->data[2] = data >> 8;
147     i2cst->data[3] = data >> 16;
148     i2cst->data[4] = data >> 24;
149 }
150 /*
151  * Generate interface capability based on what is returned by TIS and what is
152  * expected by I2C. Save the capability in the data array overwriting the TIS
153  * capability.
154  */
155 static uint32_t tpm_tis_i2c_interface_capability(TPMStateI2C *i2cst,
156                                                  uint32_t tis_cap)
157 {
158     uint32_t i2c_cap;
159 
160     /* Now generate i2c capability */
161     i2c_cap = (TPM_I2C_CAP_INTERFACE_TYPE |
162                TPM_I2C_CAP_INTERFACE_VER  |
163                TPM_I2C_CAP_TPM2_FAMILY    |
164                TPM_I2C_CAP_LOCALITY_CAP   |
165                TPM_I2C_CAP_BUS_SPEED      |
166                TPM_I2C_CAP_DEV_ADDR_CHANGE);
167 
168     /* Now check the TIS and set some capabilities */
169 
170     /* Static burst count set */
171     if (tis_cap & TPM_TIS_CAP_BURST_COUNT_STATIC) {
172         i2c_cap |= TPM_I2C_CAP_BURST_COUNT_STATIC;
173     }
174 
175     return i2c_cap;
176 }
177 
178 /* Convert I2C register to TIS address and returns the name of the register */
179 static inline void tpm_tis_i2c_to_tis_reg(TPMStateI2C *i2cst, uint8_t i2c_reg)
180 {
181     const I2CRegMap *reg_map;
182     int i;
183 
184     i2cst->tis_addr = 0xffffffff;
185 
186     /* Special case for the STS register. */
187     if (i2c_reg >= TPM_I2C_REG_STS && i2c_reg <= TPM_I2C_REG_STS + 3) {
188         i2c_reg = TPM_I2C_REG_STS;
189     }
190 
191     for (i = 0; i < ARRAY_SIZE(tpm_tis_reg_map); i++) {
192         reg_map = &tpm_tis_reg_map[i];
193         if (reg_map->i2c_reg == i2c_reg) {
194             i2cst->reg_name = reg_map->reg_name;
195             i2cst->tis_addr = reg_map->tis_reg;
196 
197             /* Include the locality in the address. */
198             assert(TPM_TIS_I2C_IS_VALID_LOCTY(i2cst->loc_sel));
199             i2cst->tis_addr += (i2cst->loc_sel << TPM_TIS_LOCALITY_SHIFT);
200             break;
201         }
202     }
203 }
204 
205 /* Clear some fields from the structure. */
206 static inline void tpm_tis_i2c_clear_data(TPMStateI2C *i2cst)
207 {
208     /* Clear operation and offset */
209     i2cst->operation = 0;
210     i2cst->offset = 0;
211     i2cst->tis_addr = 0xffffffff;
212     i2cst->reg_name = NULL;
213     memset(i2cst->data, 0, sizeof(i2cst->data));
214 
215     return;
216 }
217 
218 /* Send data to TPM */
219 static inline void tpm_tis_i2c_tpm_send(TPMStateI2C *i2cst)
220 {
221     uint32_t data;
222     size_t offset = 0;
223     uint32_t sz = 4;
224 
225     if ((i2cst->operation == OP_SEND) && (i2cst->offset > 1)) {
226 
227         switch (i2cst->data[0]) {
228         case TPM_I2C_REG_DATA_CSUM_ENABLE:
229             /*
230              * Checksum is not handled by TIS code hence we will consume the
231              * register here.
232              */
233             i2cst->csum_enable = i2cst->data[1] & TPM_DATA_CSUM_ENABLED;
234             break;
235         case TPM_I2C_REG_DATA_FIFO:
236             /* Handled in the main i2c_send function */
237             break;
238         case TPM_I2C_REG_LOC_SEL:
239             /*
240              * This register is not handled by TIS so save the locality
241              * locally
242              */
243             if (TPM_TIS_I2C_IS_VALID_LOCTY(i2cst->data[1])) {
244                 i2cst->loc_sel = i2cst->data[1];
245             }
246             break;
247         default:
248             /* We handle non-FIFO here */
249 
250             /* Index 0 is a register. Convert byte stream to uint32_t */
251             data = i2cst->data[1];
252             data |= i2cst->data[2] << 8;
253             data |= i2cst->data[3] << 16;
254             data |= i2cst->data[4] << 24;
255 
256             /* Add register specific masking */
257             switch (i2cst->data[0]) {
258             case TPM_I2C_REG_INT_ENABLE:
259                 data &= TPM_I2C_INT_ENABLE_MASK;
260                 break;
261             case TPM_I2C_REG_STS ... TPM_I2C_REG_STS + 3:
262                 /*
263                  * STS register has 4 bytes data.
264                  * As per the specs following writes must be allowed.
265                  *  - From base address 1 to 4 bytes are allowed.
266                  *  - Single byte write to first or last byte must
267                  *    be allowed.
268                  */
269                 offset = i2cst->data[0] - TPM_I2C_REG_STS;
270                 if (offset > 0) {
271                     sz = 1;
272                 }
273                 data &= (TPM_I2C_STS_WRITE_MASK >> (offset * 8));
274                 break;
275             }
276 
277             tpm_tis_write_data(&i2cst->state, i2cst->tis_addr + offset, data,
278                                sz);
279             break;
280         }
281 
282         tpm_tis_i2c_clear_data(i2cst);
283     }
284 
285     return;
286 }
287 
288 /* Callback from TPM to indicate that response is copied */
289 static void tpm_tis_i2c_request_completed(TPMIf *ti, int ret)
290 {
291     TPMStateI2C *i2cst = TPM_TIS_I2C(ti);
292     TPMState *s = &i2cst->state;
293 
294     /* Inform the common code. */
295     tpm_tis_request_completed(s, ret);
296 }
297 
298 static enum TPMVersion tpm_tis_i2c_get_tpm_version(TPMIf *ti)
299 {
300     TPMStateI2C *i2cst = TPM_TIS_I2C(ti);
301     TPMState *s = &i2cst->state;
302 
303     return tpm_tis_get_tpm_version(s);
304 }
305 
306 static int tpm_tis_i2c_event(I2CSlave *i2c, enum i2c_event event)
307 {
308     TPMStateI2C *i2cst = TPM_TIS_I2C(i2c);
309     int ret = 0;
310 
311     switch (event) {
312     case I2C_START_RECV:
313         trace_tpm_tis_i2c_event("START_RECV");
314         break;
315     case I2C_START_SEND:
316         trace_tpm_tis_i2c_event("START_SEND");
317         tpm_tis_i2c_clear_data(i2cst);
318         break;
319     case I2C_FINISH:
320         trace_tpm_tis_i2c_event("FINISH");
321         if (i2cst->operation == OP_SEND) {
322             tpm_tis_i2c_tpm_send(i2cst);
323         } else {
324             tpm_tis_i2c_clear_data(i2cst);
325         }
326         break;
327     default:
328         break;
329     }
330 
331     return ret;
332 }
333 
334 /*
335  * If data is for FIFO then it is received from tpm_tis_common buffer
336  * otherwise it will be handled using single call to common code and
337  * cached in the local buffer.
338  */
339 static uint8_t tpm_tis_i2c_recv(I2CSlave *i2c)
340 {
341     int          ret = 0;
342     uint32_t     data_read;
343     TPMStateI2C *i2cst = TPM_TIS_I2C(i2c);
344     TPMState    *s = &i2cst->state;
345     uint16_t     i2c_reg = i2cst->data[0];
346     size_t       offset;
347 
348     if (i2cst->operation == OP_RECV) {
349 
350         /* Do not cache FIFO data. */
351         if (i2cst->data[0] == TPM_I2C_REG_DATA_FIFO) {
352             data_read = tpm_tis_read_data(s, i2cst->tis_addr, 1);
353             ret = (data_read & 0xff);
354         } else if (i2cst->offset < sizeof(i2cst->data)) {
355             ret = i2cst->data[i2cst->offset++];
356         }
357 
358     } else if ((i2cst->operation == OP_SEND) && (i2cst->offset < 2)) {
359         /* First receive call after send */
360 
361         i2cst->operation = OP_RECV;
362 
363         switch (i2c_reg) {
364         case TPM_I2C_REG_LOC_SEL:
365             /* Location selection register is managed by i2c */
366             tpm_tis_i2c_set_data(i2cst, i2cst->loc_sel);
367             break;
368         case TPM_I2C_REG_DATA_FIFO:
369             /* FIFO data is directly read from TPM TIS */
370             data_read = tpm_tis_read_data(s, i2cst->tis_addr, 1);
371             tpm_tis_i2c_set_data(i2cst, (data_read & 0xff));
372             break;
373         case TPM_I2C_REG_DATA_CSUM_ENABLE:
374             tpm_tis_i2c_set_data(i2cst, i2cst->csum_enable);
375             break;
376         case TPM_I2C_REG_INT_CAPABILITY:
377             /*
378              * Interrupt is not supported in the linux kernel hence we cannot
379              * test this model with interrupts.
380              */
381             tpm_tis_i2c_set_data(i2cst, TPM_I2C_INT_ENABLE_MASK);
382             break;
383         case TPM_I2C_REG_DATA_CSUM_GET:
384             /*
385              * Checksum registers are not supported by common code hence
386              * call a common code to get the checksum.
387              */
388             data_read = tpm_tis_get_checksum(s);
389 
390             /* Save the byte stream in data field */
391             tpm_tis_i2c_set_data(i2cst, data_read);
392             break;
393         default:
394             data_read = tpm_tis_read_data(s, i2cst->tis_addr, 4);
395 
396             switch (i2c_reg) {
397             case TPM_I2C_REG_INTF_CAPABILITY:
398                 /* Prepare the capabilities as per I2C interface */
399                 data_read = tpm_tis_i2c_interface_capability(i2cst,
400                                                              data_read);
401                 break;
402             case TPM_I2C_REG_STS ... TPM_I2C_REG_STS + 3:
403                 offset = i2c_reg - TPM_I2C_REG_STS;
404                 /*
405                  * As per specs, STS bit 31:26 are reserved and must
406                  * be set to 0
407                  */
408                 data_read &= TPM_I2C_STS_READ_MASK;
409                 /*
410                  * STS register has 4 bytes data.
411                  * As per the specs following reads must be allowed.
412                  *  - From base address 1 to 4 bytes are allowed.
413                  *  - Last byte must be allowed to read as a single byte
414                  *  - Second and third byte must be allowed to read as two
415                  *    two bytes.
416                  */
417                 data_read >>= (offset * 8);
418                 break;
419             }
420 
421             /* Save byte stream in data[] */
422             tpm_tis_i2c_set_data(i2cst, data_read);
423             break;
424         }
425 
426         /* Return first byte with this call */
427         i2cst->offset = 1; /* keep the register value intact for debug */
428         ret = i2cst->data[i2cst->offset++];
429     } else {
430         i2cst->operation = OP_RECV;
431     }
432 
433     trace_tpm_tis_i2c_recv(ret);
434 
435     return ret;
436 }
437 
438 /*
439  * Send function only remembers data in the buffer and then calls
440  * TPM TIS common code during FINISH event.
441  */
442 static int tpm_tis_i2c_send(I2CSlave *i2c, uint8_t data)
443 {
444     TPMStateI2C *i2cst = TPM_TIS_I2C(i2c);
445 
446     /* Reject non-supported registers. */
447     if (i2cst->offset == 0) {
448         /* Convert I2C register to TIS register */
449         tpm_tis_i2c_to_tis_reg(i2cst, data);
450         if (i2cst->tis_addr == 0xffffffff) {
451             return 0xffffffff;
452         }
453 
454         trace_tpm_tis_i2c_send_reg(i2cst->reg_name, data);
455 
456         /* We do not support device address change */
457         if (data == TPM_I2C_REG_I2C_DEV_ADDRESS) {
458             qemu_log_mask(LOG_UNIMP, "%s: Device address change "
459                           "is not supported.\n", __func__);
460             return 0xffffffff;
461         }
462     } else {
463         trace_tpm_tis_i2c_send(data);
464     }
465 
466     if (i2cst->offset < sizeof(i2cst->data)) {
467         i2cst->operation = OP_SEND;
468 
469         /*
470          * In two cases, we save values in the local buffer.
471          * 1) The first value is always a register.
472          * 2) In case of non-FIFO multibyte registers, TIS expects full
473          *    register value hence I2C layer cache the register value and send
474          *    to TIS during FINISH event.
475          */
476         if ((i2cst->offset == 0) ||
477             (i2cst->data[0] != TPM_I2C_REG_DATA_FIFO)) {
478             i2cst->data[i2cst->offset++] = data;
479         } else {
480             /*
481              * The TIS can process FIFO data one byte at a time hence the FIFO
482              * data is sent to TIS directly.
483              */
484             tpm_tis_write_data(&i2cst->state, i2cst->tis_addr, data, 1);
485         }
486 
487         return 0;
488     }
489 
490     /* Return non-zero to indicate NAK */
491     return 1;
492 }
493 
494 static Property tpm_tis_i2c_properties[] = {
495     DEFINE_PROP_TPMBE("tpmdev", TPMStateI2C, state.be_driver),
496     DEFINE_PROP_END_OF_LIST(),
497 };
498 
499 static void tpm_tis_i2c_realizefn(DeviceState *dev, Error **errp)
500 {
501     TPMStateI2C *i2cst = TPM_TIS_I2C(dev);
502     TPMState *s = &i2cst->state;
503 
504     if (!tpm_find()) {
505         error_setg(errp, "at most one TPM device is permitted");
506         return;
507     }
508 
509     /*
510      * Get the backend pointer. It is not initialized properly during
511      * device_class_set_props
512      */
513     s->be_driver = qemu_find_tpm_be("tpm0");
514 
515     if (!s->be_driver) {
516         error_setg(errp, "'tpmdev' property is required");
517         return;
518     }
519 }
520 
521 static void tpm_tis_i2c_reset(DeviceState *dev)
522 {
523     TPMStateI2C *i2cst = TPM_TIS_I2C(dev);
524     TPMState *s = &i2cst->state;
525 
526     tpm_tis_i2c_clear_data(i2cst);
527 
528     i2cst->csum_enable = 0;
529     i2cst->loc_sel = 0x00;
530 
531     return tpm_tis_reset(s);
532 }
533 
534 static void tpm_tis_i2c_class_init(ObjectClass *klass, void *data)
535 {
536     DeviceClass *dc = DEVICE_CLASS(klass);
537     I2CSlaveClass *k = I2C_SLAVE_CLASS(klass);
538     TPMIfClass *tc = TPM_IF_CLASS(klass);
539 
540     dc->realize = tpm_tis_i2c_realizefn;
541     dc->reset = tpm_tis_i2c_reset;
542     dc->vmsd = &vmstate_tpm_tis_i2c;
543     device_class_set_props(dc, tpm_tis_i2c_properties);
544     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
545 
546     k->event = tpm_tis_i2c_event;
547     k->recv = tpm_tis_i2c_recv;
548     k->send = tpm_tis_i2c_send;
549 
550     tc->model = TPM_MODEL_TPM_TIS;
551     tc->request_completed = tpm_tis_i2c_request_completed;
552     tc->get_version = tpm_tis_i2c_get_tpm_version;
553 }
554 
555 static const TypeInfo tpm_tis_i2c_info = {
556     .name          = TYPE_TPM_TIS_I2C,
557     .parent        = TYPE_I2C_SLAVE,
558     .instance_size = sizeof(TPMStateI2C),
559     .class_init    = tpm_tis_i2c_class_init,
560         .interfaces = (InterfaceInfo[]) {
561         { TYPE_TPM_IF },
562         { }
563     }
564 };
565 
566 static void tpm_tis_i2c_register_types(void)
567 {
568     type_register_static(&tpm_tis_i2c_info);
569 }
570 
571 type_init(tpm_tis_i2c_register_types)
572