1# See docs/devel/tracing.txt for syntax documentation. 2 3# hw/timer/slavio_timer.c 4slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit 0x%"PRIx64" count 0x%x0x%08x" 5slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count 0x%x0x%08x" 6slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address 0x%"PRIx64 7slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read 0x%"PRIx64" = 0x%08x" 8slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write 0x%"PRIx64" = 0x%08x" 9slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to 0x%016"PRIx64 10slavio_timer_mem_writel_counter_invalid(void) "not user timer" 11slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" 12slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" 13slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" 14slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" 15slavio_timer_mem_writel_mode_invalid(void) "not system timer" 16slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address 0x%"PRIx64 17 18# hw/timer/grlib_gptimer.c 19grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run" 20grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x" 21grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x" 22grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x" 23grlib_gptimer_hit(int id) "timer:%d HIT" 24grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" 25grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" 26 27# hw/timer/lm32_timer.c 28lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 29lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 30lm32_timer_hit(void) "timer hit" 31lm32_timer_irq_state(int level) "irq state %d" 32 33# hw/timer/milkymist-sysctl.c 34milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 35milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 36milkymist_sysctl_icap_write(uint32_t value) "value 0x%08x" 37milkymist_sysctl_start_timer0(void) "Start timer0" 38milkymist_sysctl_stop_timer0(void) "Stop timer0" 39milkymist_sysctl_start_timer1(void) "Start timer1" 40milkymist_sysctl_stop_timer1(void) "Stop timer1" 41milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0" 42milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1" 43 44# hw/timer/aspeed_timer.c 45aspeed_timer_ctrl_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 46aspeed_timer_ctrl_external_clock(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 47aspeed_timer_ctrl_overflow_interrupt(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 48aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 49aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 50aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 51aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 52 53# hw/timer/armv7m_systick.c 54systick_reload(void) "systick reload" 55systick_timer_tick(void) "systick reload" 56systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" 57systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" 58 59# hw/char/cmsdk_apb_timer.c 60cmsdk_apb_timer_read(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer read: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" 61cmsdk_apb_timer_write(uint64_t offset, uint64_t data, unsigned size) "CMSDK APB timer write: offset 0x%" PRIx64 " data 0x%" PRIx64 " size %u" 62cmsdk_apb_timer_reset(void) "CMSDK APB timer: reset" 63 64# hw/timer/rx8900.c 65# Event 'rx8900_capture_current_time' has more than maximum 66# permitted argument count 67#rx8900_capture_current_time(int hour, int minute, int second, int weekday, int mday, int month, int year, int raw_hours, int raw_minutes, int raw_seconds, int raw_weekday, int raw_day, int raw_month, int raw_year, long offset) "Update current time to %02d:%02d:%02d %d %d/%d/%d (0x%02x%02x%02x%02x%02x%02x%02x), offset=%ld" 68rx8900_regptr_update(uint32_t ptr) "Operating on register 0x%02x" 69rx8900_regptr_overflow(void) "Register pointer has overflowed, wrapping to 0" 70rx8900_event_weekday(int weekday, int weekmask, int weekday_offset) "Set weekday to %d (0x%02x), wday_offset=%d" 71rx8900_read_register(int address, int val) "Read register 0x%x = 0x%x" 72rx8900_set_fout(int hz) "Setting fout to %dHz" 73rx8900_set_countdown_timer(int hz) "Setting countdown timer to %d Hz" 74rx8900_set_countdown_timer_per_minute(void) "Setting countdown timer to per minute updates" 75rx8900_enable_update_timer(void) "" 76rx8900_enable_alarm(void) "" 77rx8900_trigger_alarm(void) "" 78rx8900_tick(void) "" 79rx8900_fire_interrupt(void) "" 80rx8900_disable_timer(void) "" 81rx8900_enable_timer(void) "" 82rx8900_disable_fout(void) "" 83rx8900_enable_fout(void) "" 84rx8900_fout_toggle(void) "" 85rx8900_disable_countdown_timer(void) "" 86rx8900_enable_countdown_timer(void) "" 87rx8900_countdown_tick(int count) "Countdown tick, count=%d" 88rx8900_countdown_elapsed(void) "" 89rx8900_i2c_data_receive(uint8_t data) "Received I2C data 0x%02x" 90rx8900_set_register(uint32_t addr, uint8_t data) "Set data 0x%02x=0x%02x" 91rx8900_get_temperature(uint8_t raw, double val) "0x%x = %fC" 92rx8900_set_temperature(uint8_t raw, double val) "0x%x = %fC" 93rx8900_reset(void) "" 94rx8900_pin_name(const char *type, const char *name) "'%s' pin is '%s'" 95rx8900_set_voltage(double voltage) "Device voltage set to %f" 96