1# See docs/tracing.txt for syntax documentation. 2 3# hw/timer/slavio_timer.c 4slavio_timer_get_out(uint64_t limit, uint32_t counthigh, uint32_t count) "limit %"PRIx64" count %x%08x" 5slavio_timer_irq(uint32_t counthigh, uint32_t count) "callback: count %x%08x" 6slavio_timer_mem_readl_invalid(uint64_t addr) "invalid read address %"PRIx64 7slavio_timer_mem_readl(uint64_t addr, uint32_t ret) "read %"PRIx64" = %08x" 8slavio_timer_mem_writel(uint64_t addr, uint32_t val) "write %"PRIx64" = %08x" 9slavio_timer_mem_writel_limit(unsigned int timer_index, uint64_t count) "processor %d user timer set to %016"PRIx64 10slavio_timer_mem_writel_counter_invalid(void) "not user timer" 11slavio_timer_mem_writel_status_start(unsigned int timer_index) "processor %d user timer started" 12slavio_timer_mem_writel_status_stop(unsigned int timer_index) "processor %d user timer stopped" 13slavio_timer_mem_writel_mode_user(unsigned int timer_index) "processor %d changed from counter to user timer" 14slavio_timer_mem_writel_mode_counter(unsigned int timer_index) "processor %d changed from user timer to counter" 15slavio_timer_mem_writel_mode_invalid(void) "not system timer" 16slavio_timer_mem_writel_invalid(uint64_t addr) "invalid write address %"PRIx64 17 18# hw/timer/grlib_gptimer.c 19grlib_gptimer_enable(int id, uint32_t count) "timer:%d set count 0x%x and run" 20grlib_gptimer_disabled(int id, uint32_t config) "timer:%d Timer disable config 0x%x" 21grlib_gptimer_restart(int id, uint32_t reload) "timer:%d reload val: 0x%x" 22grlib_gptimer_set_scaler(uint32_t scaler, uint32_t freq) "scaler:0x%x freq: 0x%x" 23grlib_gptimer_hit(int id) "timer:%d HIT" 24grlib_gptimer_readl(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" 25grlib_gptimer_writel(int id, uint64_t addr, uint32_t val) "timer:%d addr 0x%"PRIx64" 0x%x" 26 27# hw/timer/lm32_timer.c 28lm32_timer_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 29lm32_timer_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 30lm32_timer_hit(void) "timer hit" 31lm32_timer_irq_state(int level) "irq state %d" 32 33# hw/timer/milkymist-sysctl.c 34milkymist_sysctl_memory_read(uint32_t addr, uint32_t value) "addr %08x value %08x" 35milkymist_sysctl_memory_write(uint32_t addr, uint32_t value) "addr %08x value %08x" 36milkymist_sysctl_icap_write(uint32_t value) "value %08x" 37milkymist_sysctl_start_timer0(void) "Start timer0" 38milkymist_sysctl_stop_timer0(void) "Stop timer0" 39milkymist_sysctl_start_timer1(void) "Start timer1" 40milkymist_sysctl_stop_timer1(void) "Stop timer1" 41milkymist_sysctl_pulse_irq_timer0(void) "Pulse IRQ Timer0" 42milkymist_sysctl_pulse_irq_timer1(void) "Pulse IRQ Timer1" 43 44# hw/timer/aspeed_timer.c 45aspeed_timer_ctrl_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 46aspeed_timer_ctrl_external_clock(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 47aspeed_timer_ctrl_overflow_interrupt(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 48aspeed_timer_ctrl_pulse_enable(uint8_t i, bool enable) "Timer %" PRIu8 ": %d" 49aspeed_timer_set_ctrl2(uint32_t value) "Value: 0x%" PRIx32 50aspeed_timer_set_value(int timer, int reg, uint32_t value) "Timer %d register %d: 0x%" PRIx32 51aspeed_timer_read(uint64_t offset, unsigned size, uint64_t value) "From 0x%" PRIx64 ": of size %u: 0x%" PRIx64 52 53# hw/timer/armv7m_systick.c 54systick_reload(void) "systick reload" 55systick_timer_tick(void) "systick reload" 56systick_read(uint64_t addr, uint32_t value, unsigned size) "systick read addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" 57systick_write(uint64_t addr, uint32_t value, unsigned size) "systick write addr 0x%" PRIx64 " data 0x%" PRIx32 " size %u" 58