1 /* 2 * ARM PrimeCell Timer modules. 3 * 4 * Copyright (c) 2005-2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/sysbus.h" 12 #include "qemu/timer.h" 13 #include "hw/qdev.h" 14 #include "hw/ptimer.h" 15 #include "qemu/main-loop.h" 16 #include "qemu/module.h" 17 #include "qemu/log.h" 18 19 /* Common timer implementation. */ 20 21 #define TIMER_CTRL_ONESHOT (1 << 0) 22 #define TIMER_CTRL_32BIT (1 << 1) 23 #define TIMER_CTRL_DIV1 (0 << 2) 24 #define TIMER_CTRL_DIV16 (1 << 2) 25 #define TIMER_CTRL_DIV256 (2 << 2) 26 #define TIMER_CTRL_IE (1 << 5) 27 #define TIMER_CTRL_PERIODIC (1 << 6) 28 #define TIMER_CTRL_ENABLE (1 << 7) 29 30 typedef struct { 31 ptimer_state *timer; 32 uint32_t control; 33 uint32_t limit; 34 int freq; 35 int int_level; 36 qemu_irq irq; 37 } arm_timer_state; 38 39 /* Check all active timers, and schedule the next timer interrupt. */ 40 41 static void arm_timer_update(arm_timer_state *s) 42 { 43 /* Update interrupts. */ 44 if (s->int_level && (s->control & TIMER_CTRL_IE)) { 45 qemu_irq_raise(s->irq); 46 } else { 47 qemu_irq_lower(s->irq); 48 } 49 } 50 51 static uint32_t arm_timer_read(void *opaque, hwaddr offset) 52 { 53 arm_timer_state *s = (arm_timer_state *)opaque; 54 55 switch (offset >> 2) { 56 case 0: /* TimerLoad */ 57 case 6: /* TimerBGLoad */ 58 return s->limit; 59 case 1: /* TimerValue */ 60 return ptimer_get_count(s->timer); 61 case 2: /* TimerControl */ 62 return s->control; 63 case 4: /* TimerRIS */ 64 return s->int_level; 65 case 5: /* TimerMIS */ 66 if ((s->control & TIMER_CTRL_IE) == 0) 67 return 0; 68 return s->int_level; 69 default: 70 qemu_log_mask(LOG_GUEST_ERROR, 71 "%s: Bad offset %x\n", __func__, (int)offset); 72 return 0; 73 } 74 } 75 76 /* Reset the timer limit after settings have changed. */ 77 static void arm_timer_recalibrate(arm_timer_state *s, int reload) 78 { 79 uint32_t limit; 80 81 if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) { 82 /* Free running. */ 83 if (s->control & TIMER_CTRL_32BIT) 84 limit = 0xffffffff; 85 else 86 limit = 0xffff; 87 } else { 88 /* Periodic. */ 89 limit = s->limit; 90 } 91 ptimer_set_limit(s->timer, limit, reload); 92 } 93 94 static void arm_timer_write(void *opaque, hwaddr offset, 95 uint32_t value) 96 { 97 arm_timer_state *s = (arm_timer_state *)opaque; 98 int freq; 99 100 switch (offset >> 2) { 101 case 0: /* TimerLoad */ 102 s->limit = value; 103 arm_timer_recalibrate(s, 1); 104 break; 105 case 1: /* TimerValue */ 106 /* ??? Linux seems to want to write to this readonly register. 107 Ignore it. */ 108 break; 109 case 2: /* TimerControl */ 110 if (s->control & TIMER_CTRL_ENABLE) { 111 /* Pause the timer if it is running. This may cause some 112 inaccuracy dure to rounding, but avoids a whole lot of other 113 messyness. */ 114 ptimer_stop(s->timer); 115 } 116 s->control = value; 117 freq = s->freq; 118 /* ??? Need to recalculate expiry time after changing divisor. */ 119 switch ((value >> 2) & 3) { 120 case 1: freq >>= 4; break; 121 case 2: freq >>= 8; break; 122 } 123 arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE); 124 ptimer_set_freq(s->timer, freq); 125 if (s->control & TIMER_CTRL_ENABLE) { 126 /* Restart the timer if still enabled. */ 127 ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0); 128 } 129 break; 130 case 3: /* TimerIntClr */ 131 s->int_level = 0; 132 break; 133 case 6: /* TimerBGLoad */ 134 s->limit = value; 135 arm_timer_recalibrate(s, 0); 136 break; 137 default: 138 qemu_log_mask(LOG_GUEST_ERROR, 139 "%s: Bad offset %x\n", __func__, (int)offset); 140 } 141 arm_timer_update(s); 142 } 143 144 static void arm_timer_tick(void *opaque) 145 { 146 arm_timer_state *s = (arm_timer_state *)opaque; 147 s->int_level = 1; 148 arm_timer_update(s); 149 } 150 151 static const VMStateDescription vmstate_arm_timer = { 152 .name = "arm_timer", 153 .version_id = 1, 154 .minimum_version_id = 1, 155 .fields = (VMStateField[]) { 156 VMSTATE_UINT32(control, arm_timer_state), 157 VMSTATE_UINT32(limit, arm_timer_state), 158 VMSTATE_INT32(int_level, arm_timer_state), 159 VMSTATE_PTIMER(timer, arm_timer_state), 160 VMSTATE_END_OF_LIST() 161 } 162 }; 163 164 static arm_timer_state *arm_timer_init(uint32_t freq) 165 { 166 arm_timer_state *s; 167 QEMUBH *bh; 168 169 s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state)); 170 s->freq = freq; 171 s->control = TIMER_CTRL_IE; 172 173 bh = qemu_bh_new(arm_timer_tick, s); 174 s->timer = ptimer_init(bh, PTIMER_POLICY_DEFAULT); 175 vmstate_register(NULL, -1, &vmstate_arm_timer, s); 176 return s; 177 } 178 179 /* ARM PrimeCell SP804 dual timer module. 180 * Docs at 181 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html 182 */ 183 184 #define TYPE_SP804 "sp804" 185 #define SP804(obj) OBJECT_CHECK(SP804State, (obj), TYPE_SP804) 186 187 typedef struct SP804State { 188 SysBusDevice parent_obj; 189 190 MemoryRegion iomem; 191 arm_timer_state *timer[2]; 192 uint32_t freq0, freq1; 193 int level[2]; 194 qemu_irq irq; 195 } SP804State; 196 197 static const uint8_t sp804_ids[] = { 198 /* Timer ID */ 199 0x04, 0x18, 0x14, 0, 200 /* PrimeCell ID */ 201 0xd, 0xf0, 0x05, 0xb1 202 }; 203 204 /* Merge the IRQs from the two component devices. */ 205 static void sp804_set_irq(void *opaque, int irq, int level) 206 { 207 SP804State *s = (SP804State *)opaque; 208 209 s->level[irq] = level; 210 qemu_set_irq(s->irq, s->level[0] || s->level[1]); 211 } 212 213 static uint64_t sp804_read(void *opaque, hwaddr offset, 214 unsigned size) 215 { 216 SP804State *s = (SP804State *)opaque; 217 218 if (offset < 0x20) { 219 return arm_timer_read(s->timer[0], offset); 220 } 221 if (offset < 0x40) { 222 return arm_timer_read(s->timer[1], offset - 0x20); 223 } 224 225 /* TimerPeriphID */ 226 if (offset >= 0xfe0 && offset <= 0xffc) { 227 return sp804_ids[(offset - 0xfe0) >> 2]; 228 } 229 230 switch (offset) { 231 /* Integration Test control registers, which we won't support */ 232 case 0xf00: /* TimerITCR */ 233 case 0xf04: /* TimerITOP (strictly write only but..) */ 234 qemu_log_mask(LOG_UNIMP, 235 "%s: integration test registers unimplemented\n", 236 __func__); 237 return 0; 238 } 239 240 qemu_log_mask(LOG_GUEST_ERROR, 241 "%s: Bad offset %x\n", __func__, (int)offset); 242 return 0; 243 } 244 245 static void sp804_write(void *opaque, hwaddr offset, 246 uint64_t value, unsigned size) 247 { 248 SP804State *s = (SP804State *)opaque; 249 250 if (offset < 0x20) { 251 arm_timer_write(s->timer[0], offset, value); 252 return; 253 } 254 255 if (offset < 0x40) { 256 arm_timer_write(s->timer[1], offset - 0x20, value); 257 return; 258 } 259 260 /* Technically we could be writing to the Test Registers, but not likely */ 261 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %x\n", 262 __func__, (int)offset); 263 } 264 265 static const MemoryRegionOps sp804_ops = { 266 .read = sp804_read, 267 .write = sp804_write, 268 .endianness = DEVICE_NATIVE_ENDIAN, 269 }; 270 271 static const VMStateDescription vmstate_sp804 = { 272 .name = "sp804", 273 .version_id = 1, 274 .minimum_version_id = 1, 275 .fields = (VMStateField[]) { 276 VMSTATE_INT32_ARRAY(level, SP804State, 2), 277 VMSTATE_END_OF_LIST() 278 } 279 }; 280 281 static void sp804_init(Object *obj) 282 { 283 SP804State *s = SP804(obj); 284 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 285 286 sysbus_init_irq(sbd, &s->irq); 287 memory_region_init_io(&s->iomem, obj, &sp804_ops, s, 288 "sp804", 0x1000); 289 sysbus_init_mmio(sbd, &s->iomem); 290 } 291 292 static void sp804_realize(DeviceState *dev, Error **errp) 293 { 294 SP804State *s = SP804(dev); 295 296 s->timer[0] = arm_timer_init(s->freq0); 297 s->timer[1] = arm_timer_init(s->freq1); 298 s->timer[0]->irq = qemu_allocate_irq(sp804_set_irq, s, 0); 299 s->timer[1]->irq = qemu_allocate_irq(sp804_set_irq, s, 1); 300 } 301 302 /* Integrator/CP timer module. */ 303 304 #define TYPE_INTEGRATOR_PIT "integrator_pit" 305 #define INTEGRATOR_PIT(obj) \ 306 OBJECT_CHECK(icp_pit_state, (obj), TYPE_INTEGRATOR_PIT) 307 308 typedef struct { 309 SysBusDevice parent_obj; 310 311 MemoryRegion iomem; 312 arm_timer_state *timer[3]; 313 } icp_pit_state; 314 315 static uint64_t icp_pit_read(void *opaque, hwaddr offset, 316 unsigned size) 317 { 318 icp_pit_state *s = (icp_pit_state *)opaque; 319 int n; 320 321 /* ??? Don't know the PrimeCell ID for this device. */ 322 n = offset >> 8; 323 if (n > 2) { 324 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n); 325 return 0; 326 } 327 328 return arm_timer_read(s->timer[n], offset & 0xff); 329 } 330 331 static void icp_pit_write(void *opaque, hwaddr offset, 332 uint64_t value, unsigned size) 333 { 334 icp_pit_state *s = (icp_pit_state *)opaque; 335 int n; 336 337 n = offset >> 8; 338 if (n > 2) { 339 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n); 340 return; 341 } 342 343 arm_timer_write(s->timer[n], offset & 0xff, value); 344 } 345 346 static const MemoryRegionOps icp_pit_ops = { 347 .read = icp_pit_read, 348 .write = icp_pit_write, 349 .endianness = DEVICE_NATIVE_ENDIAN, 350 }; 351 352 static void icp_pit_init(Object *obj) 353 { 354 icp_pit_state *s = INTEGRATOR_PIT(obj); 355 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 356 357 /* Timer 0 runs at the system clock speed (40MHz). */ 358 s->timer[0] = arm_timer_init(40000000); 359 /* The other two timers run at 1MHz. */ 360 s->timer[1] = arm_timer_init(1000000); 361 s->timer[2] = arm_timer_init(1000000); 362 363 sysbus_init_irq(dev, &s->timer[0]->irq); 364 sysbus_init_irq(dev, &s->timer[1]->irq); 365 sysbus_init_irq(dev, &s->timer[2]->irq); 366 367 memory_region_init_io(&s->iomem, obj, &icp_pit_ops, s, 368 "icp_pit", 0x1000); 369 sysbus_init_mmio(dev, &s->iomem); 370 /* This device has no state to save/restore. The component timers will 371 save themselves. */ 372 } 373 374 static const TypeInfo icp_pit_info = { 375 .name = TYPE_INTEGRATOR_PIT, 376 .parent = TYPE_SYS_BUS_DEVICE, 377 .instance_size = sizeof(icp_pit_state), 378 .instance_init = icp_pit_init, 379 }; 380 381 static Property sp804_properties[] = { 382 DEFINE_PROP_UINT32("freq0", SP804State, freq0, 1000000), 383 DEFINE_PROP_UINT32("freq1", SP804State, freq1, 1000000), 384 DEFINE_PROP_END_OF_LIST(), 385 }; 386 387 static void sp804_class_init(ObjectClass *klass, void *data) 388 { 389 DeviceClass *k = DEVICE_CLASS(klass); 390 391 k->realize = sp804_realize; 392 k->props = sp804_properties; 393 k->vmsd = &vmstate_sp804; 394 } 395 396 static const TypeInfo sp804_info = { 397 .name = TYPE_SP804, 398 .parent = TYPE_SYS_BUS_DEVICE, 399 .instance_size = sizeof(SP804State), 400 .instance_init = sp804_init, 401 .class_init = sp804_class_init, 402 }; 403 404 static void arm_timer_register_types(void) 405 { 406 type_register_static(&icp_pit_info); 407 type_register_static(&sp804_info); 408 } 409 410 type_init(arm_timer_register_types) 411