1 /* 2 * ARM PrimeCell Timer modules. 3 * 4 * Copyright (c) 2005-2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GPL. 8 */ 9 10 #include "qemu/osdep.h" 11 #include "hw/sysbus.h" 12 #include "migration/vmstate.h" 13 #include "qemu/timer.h" 14 #include "hw/irq.h" 15 #include "hw/ptimer.h" 16 #include "hw/qdev-properties.h" 17 #include "qemu/module.h" 18 #include "qemu/log.h" 19 20 /* Common timer implementation. */ 21 22 #define TIMER_CTRL_ONESHOT (1 << 0) 23 #define TIMER_CTRL_32BIT (1 << 1) 24 #define TIMER_CTRL_DIV1 (0 << 2) 25 #define TIMER_CTRL_DIV16 (1 << 2) 26 #define TIMER_CTRL_DIV256 (2 << 2) 27 #define TIMER_CTRL_IE (1 << 5) 28 #define TIMER_CTRL_PERIODIC (1 << 6) 29 #define TIMER_CTRL_ENABLE (1 << 7) 30 31 typedef struct { 32 ptimer_state *timer; 33 uint32_t control; 34 uint32_t limit; 35 int freq; 36 int int_level; 37 qemu_irq irq; 38 } arm_timer_state; 39 40 /* Check all active timers, and schedule the next timer interrupt. */ 41 42 static void arm_timer_update(arm_timer_state *s) 43 { 44 /* Update interrupts. */ 45 if (s->int_level && (s->control & TIMER_CTRL_IE)) { 46 qemu_irq_raise(s->irq); 47 } else { 48 qemu_irq_lower(s->irq); 49 } 50 } 51 52 static uint32_t arm_timer_read(void *opaque, hwaddr offset) 53 { 54 arm_timer_state *s = (arm_timer_state *)opaque; 55 56 switch (offset >> 2) { 57 case 0: /* TimerLoad */ 58 case 6: /* TimerBGLoad */ 59 return s->limit; 60 case 1: /* TimerValue */ 61 return ptimer_get_count(s->timer); 62 case 2: /* TimerControl */ 63 return s->control; 64 case 4: /* TimerRIS */ 65 return s->int_level; 66 case 5: /* TimerMIS */ 67 if ((s->control & TIMER_CTRL_IE) == 0) 68 return 0; 69 return s->int_level; 70 default: 71 qemu_log_mask(LOG_GUEST_ERROR, 72 "%s: Bad offset %x\n", __func__, (int)offset); 73 return 0; 74 } 75 } 76 77 /* 78 * Reset the timer limit after settings have changed. 79 * May only be called from inside a ptimer transaction block. 80 */ 81 static void arm_timer_recalibrate(arm_timer_state *s, int reload) 82 { 83 uint32_t limit; 84 85 if ((s->control & (TIMER_CTRL_PERIODIC | TIMER_CTRL_ONESHOT)) == 0) { 86 /* Free running. */ 87 if (s->control & TIMER_CTRL_32BIT) 88 limit = 0xffffffff; 89 else 90 limit = 0xffff; 91 } else { 92 /* Periodic. */ 93 limit = s->limit; 94 } 95 ptimer_set_limit(s->timer, limit, reload); 96 } 97 98 static void arm_timer_write(void *opaque, hwaddr offset, 99 uint32_t value) 100 { 101 arm_timer_state *s = (arm_timer_state *)opaque; 102 int freq; 103 104 switch (offset >> 2) { 105 case 0: /* TimerLoad */ 106 s->limit = value; 107 ptimer_transaction_begin(s->timer); 108 arm_timer_recalibrate(s, 1); 109 ptimer_transaction_commit(s->timer); 110 break; 111 case 1: /* TimerValue */ 112 /* ??? Linux seems to want to write to this readonly register. 113 Ignore it. */ 114 break; 115 case 2: /* TimerControl */ 116 ptimer_transaction_begin(s->timer); 117 if (s->control & TIMER_CTRL_ENABLE) { 118 /* Pause the timer if it is running. This may cause some 119 inaccuracy dure to rounding, but avoids a whole lot of other 120 messyness. */ 121 ptimer_stop(s->timer); 122 } 123 s->control = value; 124 freq = s->freq; 125 /* ??? Need to recalculate expiry time after changing divisor. */ 126 switch ((value >> 2) & 3) { 127 case 1: freq >>= 4; break; 128 case 2: freq >>= 8; break; 129 } 130 arm_timer_recalibrate(s, s->control & TIMER_CTRL_ENABLE); 131 ptimer_set_freq(s->timer, freq); 132 if (s->control & TIMER_CTRL_ENABLE) { 133 /* Restart the timer if still enabled. */ 134 ptimer_run(s->timer, (s->control & TIMER_CTRL_ONESHOT) != 0); 135 } 136 ptimer_transaction_commit(s->timer); 137 break; 138 case 3: /* TimerIntClr */ 139 s->int_level = 0; 140 break; 141 case 6: /* TimerBGLoad */ 142 s->limit = value; 143 ptimer_transaction_begin(s->timer); 144 arm_timer_recalibrate(s, 0); 145 ptimer_transaction_commit(s->timer); 146 break; 147 default: 148 qemu_log_mask(LOG_GUEST_ERROR, 149 "%s: Bad offset %x\n", __func__, (int)offset); 150 } 151 arm_timer_update(s); 152 } 153 154 static void arm_timer_tick(void *opaque) 155 { 156 arm_timer_state *s = (arm_timer_state *)opaque; 157 s->int_level = 1; 158 arm_timer_update(s); 159 } 160 161 static const VMStateDescription vmstate_arm_timer = { 162 .name = "arm_timer", 163 .version_id = 1, 164 .minimum_version_id = 1, 165 .fields = (VMStateField[]) { 166 VMSTATE_UINT32(control, arm_timer_state), 167 VMSTATE_UINT32(limit, arm_timer_state), 168 VMSTATE_INT32(int_level, arm_timer_state), 169 VMSTATE_PTIMER(timer, arm_timer_state), 170 VMSTATE_END_OF_LIST() 171 } 172 }; 173 174 static arm_timer_state *arm_timer_init(uint32_t freq) 175 { 176 arm_timer_state *s; 177 178 s = (arm_timer_state *)g_malloc0(sizeof(arm_timer_state)); 179 s->freq = freq; 180 s->control = TIMER_CTRL_IE; 181 182 s->timer = ptimer_init(arm_timer_tick, s, PTIMER_POLICY_DEFAULT); 183 vmstate_register(NULL, -1, &vmstate_arm_timer, s); 184 return s; 185 } 186 187 /* ARM PrimeCell SP804 dual timer module. 188 * Docs at 189 * http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0271d/index.html 190 */ 191 192 #define TYPE_SP804 "sp804" 193 #define SP804(obj) OBJECT_CHECK(SP804State, (obj), TYPE_SP804) 194 195 typedef struct SP804State { 196 SysBusDevice parent_obj; 197 198 MemoryRegion iomem; 199 arm_timer_state *timer[2]; 200 uint32_t freq0, freq1; 201 int level[2]; 202 qemu_irq irq; 203 } SP804State; 204 205 static const uint8_t sp804_ids[] = { 206 /* Timer ID */ 207 0x04, 0x18, 0x14, 0, 208 /* PrimeCell ID */ 209 0xd, 0xf0, 0x05, 0xb1 210 }; 211 212 /* Merge the IRQs from the two component devices. */ 213 static void sp804_set_irq(void *opaque, int irq, int level) 214 { 215 SP804State *s = (SP804State *)opaque; 216 217 s->level[irq] = level; 218 qemu_set_irq(s->irq, s->level[0] || s->level[1]); 219 } 220 221 static uint64_t sp804_read(void *opaque, hwaddr offset, 222 unsigned size) 223 { 224 SP804State *s = (SP804State *)opaque; 225 226 if (offset < 0x20) { 227 return arm_timer_read(s->timer[0], offset); 228 } 229 if (offset < 0x40) { 230 return arm_timer_read(s->timer[1], offset - 0x20); 231 } 232 233 /* TimerPeriphID */ 234 if (offset >= 0xfe0 && offset <= 0xffc) { 235 return sp804_ids[(offset - 0xfe0) >> 2]; 236 } 237 238 switch (offset) { 239 /* Integration Test control registers, which we won't support */ 240 case 0xf00: /* TimerITCR */ 241 case 0xf04: /* TimerITOP (strictly write only but..) */ 242 qemu_log_mask(LOG_UNIMP, 243 "%s: integration test registers unimplemented\n", 244 __func__); 245 return 0; 246 } 247 248 qemu_log_mask(LOG_GUEST_ERROR, 249 "%s: Bad offset %x\n", __func__, (int)offset); 250 return 0; 251 } 252 253 static void sp804_write(void *opaque, hwaddr offset, 254 uint64_t value, unsigned size) 255 { 256 SP804State *s = (SP804State *)opaque; 257 258 if (offset < 0x20) { 259 arm_timer_write(s->timer[0], offset, value); 260 return; 261 } 262 263 if (offset < 0x40) { 264 arm_timer_write(s->timer[1], offset - 0x20, value); 265 return; 266 } 267 268 /* Technically we could be writing to the Test Registers, but not likely */ 269 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad offset %x\n", 270 __func__, (int)offset); 271 } 272 273 static const MemoryRegionOps sp804_ops = { 274 .read = sp804_read, 275 .write = sp804_write, 276 .endianness = DEVICE_NATIVE_ENDIAN, 277 }; 278 279 static const VMStateDescription vmstate_sp804 = { 280 .name = "sp804", 281 .version_id = 1, 282 .minimum_version_id = 1, 283 .fields = (VMStateField[]) { 284 VMSTATE_INT32_ARRAY(level, SP804State, 2), 285 VMSTATE_END_OF_LIST() 286 } 287 }; 288 289 static void sp804_init(Object *obj) 290 { 291 SP804State *s = SP804(obj); 292 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 293 294 sysbus_init_irq(sbd, &s->irq); 295 memory_region_init_io(&s->iomem, obj, &sp804_ops, s, 296 "sp804", 0x1000); 297 sysbus_init_mmio(sbd, &s->iomem); 298 } 299 300 static void sp804_realize(DeviceState *dev, Error **errp) 301 { 302 SP804State *s = SP804(dev); 303 304 s->timer[0] = arm_timer_init(s->freq0); 305 s->timer[1] = arm_timer_init(s->freq1); 306 s->timer[0]->irq = qemu_allocate_irq(sp804_set_irq, s, 0); 307 s->timer[1]->irq = qemu_allocate_irq(sp804_set_irq, s, 1); 308 } 309 310 /* Integrator/CP timer module. */ 311 312 #define TYPE_INTEGRATOR_PIT "integrator_pit" 313 #define INTEGRATOR_PIT(obj) \ 314 OBJECT_CHECK(icp_pit_state, (obj), TYPE_INTEGRATOR_PIT) 315 316 typedef struct { 317 SysBusDevice parent_obj; 318 319 MemoryRegion iomem; 320 arm_timer_state *timer[3]; 321 } icp_pit_state; 322 323 static uint64_t icp_pit_read(void *opaque, hwaddr offset, 324 unsigned size) 325 { 326 icp_pit_state *s = (icp_pit_state *)opaque; 327 int n; 328 329 /* ??? Don't know the PrimeCell ID for this device. */ 330 n = offset >> 8; 331 if (n > 2) { 332 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n); 333 return 0; 334 } 335 336 return arm_timer_read(s->timer[n], offset & 0xff); 337 } 338 339 static void icp_pit_write(void *opaque, hwaddr offset, 340 uint64_t value, unsigned size) 341 { 342 icp_pit_state *s = (icp_pit_state *)opaque; 343 int n; 344 345 n = offset >> 8; 346 if (n > 2) { 347 qemu_log_mask(LOG_GUEST_ERROR, "%s: Bad timer %d\n", __func__, n); 348 return; 349 } 350 351 arm_timer_write(s->timer[n], offset & 0xff, value); 352 } 353 354 static const MemoryRegionOps icp_pit_ops = { 355 .read = icp_pit_read, 356 .write = icp_pit_write, 357 .endianness = DEVICE_NATIVE_ENDIAN, 358 }; 359 360 static void icp_pit_init(Object *obj) 361 { 362 icp_pit_state *s = INTEGRATOR_PIT(obj); 363 SysBusDevice *dev = SYS_BUS_DEVICE(obj); 364 365 /* Timer 0 runs at the system clock speed (40MHz). */ 366 s->timer[0] = arm_timer_init(40000000); 367 /* The other two timers run at 1MHz. */ 368 s->timer[1] = arm_timer_init(1000000); 369 s->timer[2] = arm_timer_init(1000000); 370 371 sysbus_init_irq(dev, &s->timer[0]->irq); 372 sysbus_init_irq(dev, &s->timer[1]->irq); 373 sysbus_init_irq(dev, &s->timer[2]->irq); 374 375 memory_region_init_io(&s->iomem, obj, &icp_pit_ops, s, 376 "icp_pit", 0x1000); 377 sysbus_init_mmio(dev, &s->iomem); 378 /* This device has no state to save/restore. The component timers will 379 save themselves. */ 380 } 381 382 static const TypeInfo icp_pit_info = { 383 .name = TYPE_INTEGRATOR_PIT, 384 .parent = TYPE_SYS_BUS_DEVICE, 385 .instance_size = sizeof(icp_pit_state), 386 .instance_init = icp_pit_init, 387 }; 388 389 static Property sp804_properties[] = { 390 DEFINE_PROP_UINT32("freq0", SP804State, freq0, 1000000), 391 DEFINE_PROP_UINT32("freq1", SP804State, freq1, 1000000), 392 DEFINE_PROP_END_OF_LIST(), 393 }; 394 395 static void sp804_class_init(ObjectClass *klass, void *data) 396 { 397 DeviceClass *k = DEVICE_CLASS(klass); 398 399 k->realize = sp804_realize; 400 k->props = sp804_properties; 401 k->vmsd = &vmstate_sp804; 402 } 403 404 static const TypeInfo sp804_info = { 405 .name = TYPE_SP804, 406 .parent = TYPE_SYS_BUS_DEVICE, 407 .instance_size = sizeof(SP804State), 408 .instance_init = sp804_init, 409 .class_init = sp804_class_init, 410 }; 411 412 static void arm_timer_register_types(void) 413 { 414 type_register_static(&icp_pit_info); 415 type_register_static(&sp804_info); 416 } 417 418 type_init(arm_timer_register_types) 419