xref: /openbmc/qemu/hw/ssi/imx_spi.c (revision ba632924)
1 /*
2  * IMX SPI Controller
3  *
4  * Copyright (c) 2016 Jean-Christophe Dubois <jcd@tribudubois.net>
5  *
6  * This work is licensed under the terms of the GNU GPL, version 2 or later.
7  * See the COPYING file in the top-level directory.
8  *
9  */
10 
11 #include "qemu/osdep.h"
12 #include "hw/ssi/imx_spi.h"
13 #include "sysemu/sysemu.h"
14 #include "qemu/log.h"
15 
16 #ifndef DEBUG_IMX_SPI
17 #define DEBUG_IMX_SPI 0
18 #endif
19 
20 #define DPRINTF(fmt, args...) \
21     do { \
22         if (DEBUG_IMX_SPI) { \
23             fprintf(stderr, "[%s]%s: " fmt , TYPE_IMX_SPI, \
24                                              __func__, ##args); \
25         } \
26     } while (0)
27 
28 static const char *imx_spi_reg_name(uint32_t reg)
29 {
30     static char unknown[20];
31 
32     switch (reg) {
33     case ECSPI_RXDATA:
34         return  "ECSPI_RXDATA";
35     case ECSPI_TXDATA:
36         return  "ECSPI_TXDATA";
37     case ECSPI_CONREG:
38         return  "ECSPI_CONREG";
39     case ECSPI_CONFIGREG:
40         return  "ECSPI_CONFIGREG";
41     case ECSPI_INTREG:
42         return  "ECSPI_INTREG";
43     case ECSPI_DMAREG:
44         return  "ECSPI_DMAREG";
45     case ECSPI_STATREG:
46         return  "ECSPI_STATREG";
47     case ECSPI_PERIODREG:
48         return  "ECSPI_PERIODREG";
49     case ECSPI_TESTREG:
50         return  "ECSPI_TESTREG";
51     case ECSPI_MSGDATA:
52         return  "ECSPI_MSGDATA";
53     default:
54         sprintf(unknown, "%d ?", reg);
55         return unknown;
56     }
57 }
58 
59 static const VMStateDescription vmstate_imx_spi = {
60     .name = TYPE_IMX_SPI,
61     .version_id = 1,
62     .minimum_version_id = 1,
63     .fields = (VMStateField[]) {
64         VMSTATE_FIFO32(tx_fifo, IMXSPIState),
65         VMSTATE_FIFO32(rx_fifo, IMXSPIState),
66         VMSTATE_INT16(burst_length, IMXSPIState),
67         VMSTATE_UINT32_ARRAY(regs, IMXSPIState, ECSPI_MAX),
68         VMSTATE_END_OF_LIST()
69     },
70 };
71 
72 static void imx_spi_txfifo_reset(IMXSPIState *s)
73 {
74     fifo32_reset(&s->tx_fifo);
75     s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TE;
76     s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_TF;
77 }
78 
79 static void imx_spi_rxfifo_reset(IMXSPIState *s)
80 {
81     fifo32_reset(&s->rx_fifo);
82     s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_RR;
83     s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_RF;
84     s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_RO;
85 }
86 
87 static void imx_spi_update_irq(IMXSPIState *s)
88 {
89     int level;
90 
91     if (fifo32_is_empty(&s->rx_fifo)) {
92         s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_RR;
93     } else {
94         s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RR;
95     }
96 
97     if (fifo32_is_full(&s->rx_fifo)) {
98         s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RF;
99     } else {
100         s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_RF;
101     }
102 
103     if (fifo32_is_empty(&s->tx_fifo)) {
104         s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TE;
105     } else {
106         s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_TE;
107     }
108 
109     if (fifo32_is_full(&s->tx_fifo)) {
110         s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TF;
111     } else {
112         s->regs[ECSPI_STATREG] &= ~ECSPI_STATREG_TF;
113     }
114 
115     level = s->regs[ECSPI_STATREG] & s->regs[ECSPI_INTREG] ? 1 : 0;
116 
117     qemu_set_irq(s->irq, level);
118 
119     DPRINTF("IRQ level is %d\n", level);
120 }
121 
122 static uint8_t imx_spi_selected_channel(IMXSPIState *s)
123 {
124     return EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_CHANNEL_SELECT);
125 }
126 
127 static uint32_t imx_spi_burst_length(IMXSPIState *s)
128 {
129     return EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_BURST_LENGTH) + 1;
130 }
131 
132 static bool imx_spi_is_enabled(IMXSPIState *s)
133 {
134     return s->regs[ECSPI_CONREG] & ECSPI_CONREG_EN;
135 }
136 
137 static bool imx_spi_channel_is_master(IMXSPIState *s)
138 {
139     uint8_t mode = EXTRACT(s->regs[ECSPI_CONREG], ECSPI_CONREG_CHANNEL_MODE);
140 
141     return (mode & (1 << imx_spi_selected_channel(s))) ? true : false;
142 }
143 
144 static bool imx_spi_is_multiple_master_burst(IMXSPIState *s)
145 {
146     uint8_t wave = EXTRACT(s->regs[ECSPI_CONFIGREG], ECSPI_CONFIGREG_SS_CTL);
147 
148     return imx_spi_channel_is_master(s) &&
149            !(s->regs[ECSPI_CONREG] & ECSPI_CONREG_SMC) &&
150            ((wave & (1 << imx_spi_selected_channel(s))) ? true : false);
151 }
152 
153 static void imx_spi_flush_txfifo(IMXSPIState *s)
154 {
155     uint32_t tx;
156     uint32_t rx;
157 
158     DPRINTF("Begin: TX Fifo Size = %d, RX Fifo Size = %d\n",
159             fifo32_num_used(&s->tx_fifo), fifo32_num_used(&s->rx_fifo));
160 
161     while (!fifo32_is_empty(&s->tx_fifo)) {
162         int tx_burst = 0;
163         int index = 0;
164 
165         if (s->burst_length <= 0) {
166             s->burst_length = imx_spi_burst_length(s);
167 
168             DPRINTF("Burst length = %d\n", s->burst_length);
169 
170             if (imx_spi_is_multiple_master_burst(s)) {
171                 s->regs[ECSPI_CONREG] |= ECSPI_CONREG_XCH;
172             }
173         }
174 
175         tx = fifo32_pop(&s->tx_fifo);
176 
177         DPRINTF("data tx:0x%08x\n", tx);
178 
179         tx_burst = MIN(s->burst_length, 32);
180 
181         rx = 0;
182 
183         while (tx_burst) {
184             uint8_t byte = tx & 0xff;
185 
186             DPRINTF("writing 0x%02x\n", (uint32_t)byte);
187 
188             /* We need to write one byte at a time */
189             byte = ssi_transfer(s->bus, byte);
190 
191             DPRINTF("0x%02x read\n", (uint32_t)byte);
192 
193             tx = tx >> 8;
194             rx |= (byte << (index * 8));
195 
196             /* Remove 8 bits from the actual burst */
197             tx_burst -= 8;
198             s->burst_length -= 8;
199             index++;
200         }
201 
202         DPRINTF("data rx:0x%08x\n", rx);
203 
204         if (fifo32_is_full(&s->rx_fifo)) {
205             s->regs[ECSPI_STATREG] |= ECSPI_STATREG_RO;
206         } else {
207             fifo32_push(&s->rx_fifo, (uint8_t)rx);
208         }
209 
210         if (s->burst_length <= 0) {
211             if (!imx_spi_is_multiple_master_burst(s)) {
212                 s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC;
213                 break;
214             }
215         }
216     }
217 
218     if (fifo32_is_empty(&s->tx_fifo)) {
219         s->regs[ECSPI_STATREG] |= ECSPI_STATREG_TC;
220         s->regs[ECSPI_CONREG] &= ~ECSPI_CONREG_XCH;
221     }
222 
223     /* TODO: We should also use TDR and RDR bits */
224 
225     DPRINTF("End: TX Fifo Size = %d, RX Fifo Size = %d\n",
226             fifo32_num_used(&s->tx_fifo), fifo32_num_used(&s->rx_fifo));
227 }
228 
229 static void imx_spi_reset(DeviceState *dev)
230 {
231     IMXSPIState *s = IMX_SPI(dev);
232 
233     DPRINTF("\n");
234 
235     memset(s->regs, 0, sizeof(s->regs));
236 
237     s->regs[ECSPI_STATREG] = 0x00000003;
238 
239     imx_spi_rxfifo_reset(s);
240     imx_spi_txfifo_reset(s);
241 
242     imx_spi_update_irq(s);
243 
244     s->burst_length = 0;
245 }
246 
247 static uint64_t imx_spi_read(void *opaque, hwaddr offset, unsigned size)
248 {
249     uint32_t value = 0;
250     IMXSPIState *s = opaque;
251     uint32_t index = offset >> 2;
252 
253     if (index >=  ECSPI_MAX) {
254         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
255                       HWADDR_PRIx "\n", TYPE_IMX_SPI, __func__, offset);
256         return 0;
257     }
258 
259     switch (index) {
260     case ECSPI_RXDATA:
261         if (!imx_spi_is_enabled(s)) {
262             value = 0;
263         } else if (fifo32_is_empty(&s->rx_fifo)) {
264             /* value is undefined */
265             value = 0xdeadbeef;
266         } else {
267             /* read from the RX FIFO */
268             value = fifo32_pop(&s->rx_fifo);
269         }
270 
271         break;
272     case ECSPI_TXDATA:
273         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read from TX FIFO\n",
274                       TYPE_IMX_SPI, __func__);
275 
276         /* Reading from TXDATA gives 0 */
277 
278         break;
279     case ECSPI_MSGDATA:
280         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to read from MSG FIFO\n",
281                       TYPE_IMX_SPI, __func__);
282 
283         /* Reading from MSGDATA gives 0 */
284 
285         break;
286     default:
287         value = s->regs[index];
288         break;
289     }
290 
291     DPRINTF("reg[%s] => 0x%" PRIx32 "\n", imx_spi_reg_name(index), value);
292 
293     imx_spi_update_irq(s);
294 
295     return (uint64_t)value;
296 }
297 
298 static void imx_spi_write(void *opaque, hwaddr offset, uint64_t value,
299                            unsigned size)
300 {
301     IMXSPIState *s = opaque;
302     uint32_t index = offset >> 2;
303     uint32_t change_mask;
304 
305     if (index >=  ECSPI_MAX) {
306         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Bad register at offset 0x%"
307                       HWADDR_PRIx "\n", TYPE_IMX_SPI, __func__, offset);
308         return;
309     }
310 
311     DPRINTF("reg[%s] <= 0x%" PRIx32 "\n", imx_spi_reg_name(index),
312             (uint32_t)value);
313 
314     change_mask = s->regs[index] ^ value;
315 
316     switch (index) {
317     case ECSPI_RXDATA:
318         qemu_log_mask(LOG_GUEST_ERROR, "[%s]%s: Trying to write to RX FIFO\n",
319                       TYPE_IMX_SPI, __func__);
320         break;
321     case ECSPI_TXDATA:
322         if (!imx_spi_is_enabled(s)) {
323             /* Ignore writes if device is disabled */
324             break;
325         } else if (fifo32_is_full(&s->tx_fifo)) {
326             /* Ignore writes if queue is full */
327             break;
328         }
329 
330         fifo32_push(&s->tx_fifo, (uint32_t)value);
331 
332         if (imx_spi_channel_is_master(s) &&
333             (s->regs[ECSPI_CONREG] & ECSPI_CONREG_SMC)) {
334             /*
335              * Start emitting if current channel is master and SMC bit is
336              * set.
337              */
338             imx_spi_flush_txfifo(s);
339         }
340 
341         break;
342     case ECSPI_STATREG:
343         /* the RO and TC bits are write-one-to-clear */
344         value &= ECSPI_STATREG_RO | ECSPI_STATREG_TC;
345         s->regs[ECSPI_STATREG] &= ~value;
346 
347         break;
348     case ECSPI_CONREG:
349         s->regs[ECSPI_CONREG] = value;
350 
351         if (!imx_spi_is_enabled(s)) {
352             /* device is disabled, so this is a reset */
353             imx_spi_reset(DEVICE(s));
354             return;
355         }
356 
357         if (imx_spi_channel_is_master(s)) {
358             int i;
359 
360             /* We are in master mode */
361 
362             for (i = 0; i < 4; i++) {
363                 qemu_set_irq(s->cs_lines[i],
364                              i == imx_spi_selected_channel(s) ? 0 : 1);
365             }
366 
367             if ((value & change_mask & ECSPI_CONREG_SMC) &&
368                 !fifo32_is_empty(&s->tx_fifo)) {
369                 /* SMC bit is set and TX FIFO has some slots filled in */
370                 imx_spi_flush_txfifo(s);
371             } else if ((value & change_mask & ECSPI_CONREG_XCH) &&
372                 !(value & ECSPI_CONREG_SMC)) {
373                 /* This is a request to start emitting */
374                 imx_spi_flush_txfifo(s);
375             }
376         }
377 
378         break;
379     case ECSPI_MSGDATA:
380         /* it is not clear from the spec what MSGDATA is for */
381         /* Anyway it is not used by Linux driver */
382         /* So for now we just ignore it */
383         qemu_log_mask(LOG_UNIMP,
384                       "[%s]%s: Trying to write to MSGDATA, ignoring\n",
385                       TYPE_IMX_SPI, __func__);
386         break;
387     default:
388         s->regs[index] = value;
389 
390         break;
391     }
392 
393     imx_spi_update_irq(s);
394 }
395 
396 static const struct MemoryRegionOps imx_spi_ops = {
397     .read = imx_spi_read,
398     .write = imx_spi_write,
399     .endianness = DEVICE_NATIVE_ENDIAN,
400     .valid = {
401         /*
402          * Our device would not work correctly if the guest was doing
403          * unaligned access. This might not be a limitation on the real
404          * device but in practice there is no reason for a guest to access
405          * this device unaligned.
406          */
407         .min_access_size = 4,
408         .max_access_size = 4,
409         .unaligned = false,
410     },
411 };
412 
413 static void imx_spi_realize(DeviceState *dev, Error **errp)
414 {
415     IMXSPIState *s = IMX_SPI(dev);
416     int i;
417 
418     s->bus = ssi_create_bus(dev, "spi");
419 
420     memory_region_init_io(&s->iomem, OBJECT(dev), &imx_spi_ops, s,
421                           TYPE_IMX_SPI, 0x1000);
422     sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
423     sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
424 
425     ssi_auto_connect_slaves(dev, s->cs_lines, s->bus);
426 
427     for (i = 0; i < 4; ++i) {
428         sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->cs_lines[i]);
429     }
430 
431     s->burst_length = 0;
432 
433     fifo32_create(&s->tx_fifo, ECSPI_FIFO_SIZE);
434     fifo32_create(&s->rx_fifo, ECSPI_FIFO_SIZE);
435 }
436 
437 static void imx_spi_class_init(ObjectClass *klass, void *data)
438 {
439     DeviceClass *dc = DEVICE_CLASS(klass);
440 
441     dc->realize = imx_spi_realize;
442     dc->vmsd = &vmstate_imx_spi;
443     dc->reset = imx_spi_reset;
444     dc->desc = "i.MX SPI Controller";
445 }
446 
447 static const TypeInfo imx_spi_info = {
448     .name          = TYPE_IMX_SPI,
449     .parent        = TYPE_SYS_BUS_DEVICE,
450     .instance_size = sizeof(IMXSPIState),
451     .class_init    = imx_spi_class_init,
452 };
453 
454 static void imx_spi_register_types(void)
455 {
456     type_register_static(&imx_spi_info);
457 }
458 
459 type_init(imx_spi_register_types)
460