1 /* 2 * ASPEED AST2400 SMC Controller (SPI Flash Only) 3 * 4 * Copyright (C) 2016 IBM Corp. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/sysbus.h" 27 #include "migration/vmstate.h" 28 #include "qemu/log.h" 29 #include "qemu/module.h" 30 #include "qemu/error-report.h" 31 #include "qapi/error.h" 32 #include "exec/address-spaces.h" 33 #include "qemu/units.h" 34 #include "trace.h" 35 36 #include "hw/irq.h" 37 #include "hw/qdev-properties.h" 38 #include "hw/ssi/aspeed_smc.h" 39 40 /* CE Type Setting Register */ 41 #define R_CONF (0x00 / 4) 42 #define CONF_LEGACY_DISABLE (1 << 31) 43 #define CONF_ENABLE_W4 20 44 #define CONF_ENABLE_W3 19 45 #define CONF_ENABLE_W2 18 46 #define CONF_ENABLE_W1 17 47 #define CONF_ENABLE_W0 16 48 #define CONF_FLASH_TYPE4 8 49 #define CONF_FLASH_TYPE3 6 50 #define CONF_FLASH_TYPE2 4 51 #define CONF_FLASH_TYPE1 2 52 #define CONF_FLASH_TYPE0 0 53 #define CONF_FLASH_TYPE_NOR 0x0 54 #define CONF_FLASH_TYPE_NAND 0x1 55 #define CONF_FLASH_TYPE_SPI 0x2 /* AST2600 is SPI only */ 56 57 /* CE Control Register */ 58 #define R_CE_CTRL (0x04 / 4) 59 #define CTRL_EXTENDED4 4 /* 32 bit addressing for SPI */ 60 #define CTRL_EXTENDED3 3 /* 32 bit addressing for SPI */ 61 #define CTRL_EXTENDED2 2 /* 32 bit addressing for SPI */ 62 #define CTRL_EXTENDED1 1 /* 32 bit addressing for SPI */ 63 #define CTRL_EXTENDED0 0 /* 32 bit addressing for SPI */ 64 65 /* Interrupt Control and Status Register */ 66 #define R_INTR_CTRL (0x08 / 4) 67 #define INTR_CTRL_DMA_STATUS (1 << 11) 68 #define INTR_CTRL_CMD_ABORT_STATUS (1 << 10) 69 #define INTR_CTRL_WRITE_PROTECT_STATUS (1 << 9) 70 #define INTR_CTRL_DMA_EN (1 << 3) 71 #define INTR_CTRL_CMD_ABORT_EN (1 << 2) 72 #define INTR_CTRL_WRITE_PROTECT_EN (1 << 1) 73 74 /* CEx Control Register */ 75 #define R_CTRL0 (0x10 / 4) 76 #define CTRL_IO_QPI (1 << 31) 77 #define CTRL_IO_QUAD_DATA (1 << 30) 78 #define CTRL_IO_DUAL_DATA (1 << 29) 79 #define CTRL_IO_DUAL_ADDR_DATA (1 << 28) /* Includes dummies */ 80 #define CTRL_IO_QUAD_ADDR_DATA (1 << 28) /* Includes dummies */ 81 #define CTRL_CMD_SHIFT 16 82 #define CTRL_CMD_MASK 0xff 83 #define CTRL_DUMMY_HIGH_SHIFT 14 84 #define CTRL_AST2400_SPI_4BYTE (1 << 13) 85 #define CE_CTRL_CLOCK_FREQ_SHIFT 8 86 #define CE_CTRL_CLOCK_FREQ_MASK 0xf 87 #define CE_CTRL_CLOCK_FREQ(div) \ 88 (((div) & CE_CTRL_CLOCK_FREQ_MASK) << CE_CTRL_CLOCK_FREQ_SHIFT) 89 #define CTRL_DUMMY_LOW_SHIFT 6 /* 2 bits [7:6] */ 90 #define CTRL_CE_STOP_ACTIVE (1 << 2) 91 #define CTRL_CMD_MODE_MASK 0x3 92 #define CTRL_READMODE 0x0 93 #define CTRL_FREADMODE 0x1 94 #define CTRL_WRITEMODE 0x2 95 #define CTRL_USERMODE 0x3 96 #define R_CTRL1 (0x14 / 4) 97 #define R_CTRL2 (0x18 / 4) 98 #define R_CTRL3 (0x1C / 4) 99 #define R_CTRL4 (0x20 / 4) 100 101 /* CEx Segment Address Register */ 102 #define R_SEG_ADDR0 (0x30 / 4) 103 #define SEG_END_SHIFT 24 /* 8MB units */ 104 #define SEG_END_MASK 0xff 105 #define SEG_START_SHIFT 16 /* address bit [A29-A23] */ 106 #define SEG_START_MASK 0xff 107 #define R_SEG_ADDR1 (0x34 / 4) 108 #define R_SEG_ADDR2 (0x38 / 4) 109 #define R_SEG_ADDR3 (0x3C / 4) 110 #define R_SEG_ADDR4 (0x40 / 4) 111 112 /* Misc Control Register #1 */ 113 #define R_MISC_CTRL1 (0x50 / 4) 114 115 /* SPI dummy cycle data */ 116 #define R_DUMMY_DATA (0x54 / 4) 117 118 /* DMA Control/Status Register */ 119 #define R_DMA_CTRL (0x80 / 4) 120 #define DMA_CTRL_DELAY_MASK 0xf 121 #define DMA_CTRL_DELAY_SHIFT 8 122 #define DMA_CTRL_FREQ_MASK 0xf 123 #define DMA_CTRL_FREQ_SHIFT 4 124 #define DMA_CTRL_CALIB (1 << 3) 125 #define DMA_CTRL_CKSUM (1 << 2) 126 #define DMA_CTRL_WRITE (1 << 1) 127 #define DMA_CTRL_ENABLE (1 << 0) 128 129 /* DMA Flash Side Address */ 130 #define R_DMA_FLASH_ADDR (0x84 / 4) 131 132 /* DMA DRAM Side Address */ 133 #define R_DMA_DRAM_ADDR (0x88 / 4) 134 135 /* DMA Length Register */ 136 #define R_DMA_LEN (0x8C / 4) 137 138 /* Checksum Calculation Result */ 139 #define R_DMA_CHECKSUM (0x90 / 4) 140 141 /* Read Timing Compensation Register */ 142 #define R_TIMINGS (0x94 / 4) 143 144 /* SPI controller registers and bits (AST2400) */ 145 #define R_SPI_CONF (0x00 / 4) 146 #define SPI_CONF_ENABLE_W0 0 147 #define R_SPI_CTRL0 (0x4 / 4) 148 #define R_SPI_MISC_CTRL (0x10 / 4) 149 #define R_SPI_TIMINGS (0x14 / 4) 150 151 #define ASPEED_SMC_R_SPI_MAX (0x20 / 4) 152 #define ASPEED_SMC_R_SMC_MAX (0x20 / 4) 153 154 #define ASPEED_SOC_SMC_FLASH_BASE 0x10000000 155 #define ASPEED_SOC_FMC_FLASH_BASE 0x20000000 156 #define ASPEED_SOC_SPI_FLASH_BASE 0x30000000 157 #define ASPEED_SOC_SPI2_FLASH_BASE 0x38000000 158 159 /* 160 * DMA DRAM addresses should be 4 bytes aligned and the valid address 161 * range is 0x40000000 - 0x5FFFFFFF (AST2400) 162 * 0x80000000 - 0xBFFFFFFF (AST2500) 163 * 164 * DMA flash addresses should be 4 bytes aligned and the valid address 165 * range is 0x20000000 - 0x2FFFFFFF. 166 * 167 * DMA length is from 4 bytes to 32MB 168 * 0: 4 bytes 169 * 0x7FFFFF: 32M bytes 170 */ 171 #define DMA_DRAM_ADDR(s, val) ((s)->sdram_base | \ 172 ((val) & (s)->ctrl->dma_dram_mask)) 173 #define DMA_FLASH_ADDR(s, val) ((s)->ctrl->flash_window_base | \ 174 ((val) & (s)->ctrl->dma_flash_mask)) 175 #define DMA_LENGTH(val) ((val) & 0x01FFFFFC) 176 177 /* Flash opcodes. */ 178 #define SPI_OP_READ 0x03 /* Read data bytes (low frequency) */ 179 180 #define SNOOP_OFF 0xFF 181 #define SNOOP_START 0x0 182 183 /* 184 * Default segments mapping addresses and size for each slave per 185 * controller. These can be changed when board is initialized with the 186 * Segment Address Registers. 187 */ 188 static const AspeedSegments aspeed_segments_legacy[] = { 189 { 0x10000000, 32 * 1024 * 1024 }, 190 }; 191 192 static const AspeedSegments aspeed_segments_fmc[] = { 193 { 0x20000000, 64 * 1024 * 1024 }, /* start address is readonly */ 194 { 0x24000000, 32 * 1024 * 1024 }, 195 { 0x26000000, 32 * 1024 * 1024 }, 196 { 0x28000000, 32 * 1024 * 1024 }, 197 { 0x2A000000, 32 * 1024 * 1024 } 198 }; 199 200 static const AspeedSegments aspeed_segments_spi[] = { 201 { 0x30000000, 64 * 1024 * 1024 }, 202 }; 203 204 static const AspeedSegments aspeed_segments_ast2500_fmc[] = { 205 { 0x20000000, 128 * 1024 * 1024 }, /* start address is readonly */ 206 { 0x28000000, 32 * 1024 * 1024 }, 207 { 0x2A000000, 32 * 1024 * 1024 }, 208 }; 209 210 static const AspeedSegments aspeed_segments_ast2500_spi1[] = { 211 { 0x30000000, 32 * 1024 * 1024 }, /* start address is readonly */ 212 { 0x32000000, 96 * 1024 * 1024 }, /* end address is readonly */ 213 }; 214 215 static const AspeedSegments aspeed_segments_ast2500_spi2[] = { 216 { 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */ 217 { 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */ 218 }; 219 static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, 220 const AspeedSegments *seg); 221 static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, uint32_t reg, 222 AspeedSegments *seg); 223 224 /* 225 * AST2600 definitions 226 */ 227 #define ASPEED26_SOC_FMC_FLASH_BASE 0x20000000 228 #define ASPEED26_SOC_SPI_FLASH_BASE 0x30000000 229 #define ASPEED26_SOC_SPI2_FLASH_BASE 0x50000000 230 231 static const AspeedSegments aspeed_segments_ast2600_fmc[] = { 232 { 0x0, 128 * MiB }, /* start address is readonly */ 233 { 0x0, 0 }, /* disabled */ 234 { 0x0, 0 }, /* disabled */ 235 }; 236 237 static const AspeedSegments aspeed_segments_ast2600_spi1[] = { 238 { 0x0, 128 * MiB }, /* start address is readonly */ 239 { 0x0, 0 }, /* disabled */ 240 }; 241 242 static const AspeedSegments aspeed_segments_ast2600_spi2[] = { 243 { 0x0, 128 * MiB }, /* start address is readonly */ 244 { 0x0, 0 }, /* disabled */ 245 { 0x0, 0 }, /* disabled */ 246 }; 247 248 static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, 249 const AspeedSegments *seg); 250 static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, 251 uint32_t reg, AspeedSegments *seg); 252 253 static const AspeedSMCController controllers[] = { 254 { 255 .name = "aspeed.smc-ast2400", 256 .r_conf = R_CONF, 257 .r_ce_ctrl = R_CE_CTRL, 258 .r_ctrl0 = R_CTRL0, 259 .r_timings = R_TIMINGS, 260 .nregs_timings = 1, 261 .conf_enable_w0 = CONF_ENABLE_W0, 262 .max_slaves = 5, 263 .segments = aspeed_segments_legacy, 264 .flash_window_base = ASPEED_SOC_SMC_FLASH_BASE, 265 .flash_window_size = 0x6000000, 266 .has_dma = false, 267 .nregs = ASPEED_SMC_R_SMC_MAX, 268 .segment_to_reg = aspeed_smc_segment_to_reg, 269 .reg_to_segment = aspeed_smc_reg_to_segment, 270 }, { 271 .name = "aspeed.fmc-ast2400", 272 .r_conf = R_CONF, 273 .r_ce_ctrl = R_CE_CTRL, 274 .r_ctrl0 = R_CTRL0, 275 .r_timings = R_TIMINGS, 276 .nregs_timings = 1, 277 .conf_enable_w0 = CONF_ENABLE_W0, 278 .max_slaves = 5, 279 .segments = aspeed_segments_fmc, 280 .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, 281 .flash_window_size = 0x10000000, 282 .has_dma = true, 283 .dma_flash_mask = 0x0FFFFFFC, 284 .dma_dram_mask = 0x1FFFFFFC, 285 .nregs = ASPEED_SMC_R_MAX, 286 .segment_to_reg = aspeed_smc_segment_to_reg, 287 .reg_to_segment = aspeed_smc_reg_to_segment, 288 }, { 289 .name = "aspeed.spi1-ast2400", 290 .r_conf = R_SPI_CONF, 291 .r_ce_ctrl = 0xff, 292 .r_ctrl0 = R_SPI_CTRL0, 293 .r_timings = R_SPI_TIMINGS, 294 .nregs_timings = 1, 295 .conf_enable_w0 = SPI_CONF_ENABLE_W0, 296 .max_slaves = 1, 297 .segments = aspeed_segments_spi, 298 .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE, 299 .flash_window_size = 0x10000000, 300 .has_dma = false, 301 .nregs = ASPEED_SMC_R_SPI_MAX, 302 .segment_to_reg = aspeed_smc_segment_to_reg, 303 .reg_to_segment = aspeed_smc_reg_to_segment, 304 }, { 305 .name = "aspeed.fmc-ast2500", 306 .r_conf = R_CONF, 307 .r_ce_ctrl = R_CE_CTRL, 308 .r_ctrl0 = R_CTRL0, 309 .r_timings = R_TIMINGS, 310 .nregs_timings = 1, 311 .conf_enable_w0 = CONF_ENABLE_W0, 312 .max_slaves = 3, 313 .segments = aspeed_segments_ast2500_fmc, 314 .flash_window_base = ASPEED_SOC_FMC_FLASH_BASE, 315 .flash_window_size = 0x10000000, 316 .has_dma = true, 317 .dma_flash_mask = 0x0FFFFFFC, 318 .dma_dram_mask = 0x3FFFFFFC, 319 .nregs = ASPEED_SMC_R_MAX, 320 .segment_to_reg = aspeed_smc_segment_to_reg, 321 .reg_to_segment = aspeed_smc_reg_to_segment, 322 }, { 323 .name = "aspeed.spi1-ast2500", 324 .r_conf = R_CONF, 325 .r_ce_ctrl = R_CE_CTRL, 326 .r_ctrl0 = R_CTRL0, 327 .r_timings = R_TIMINGS, 328 .nregs_timings = 1, 329 .conf_enable_w0 = CONF_ENABLE_W0, 330 .max_slaves = 2, 331 .segments = aspeed_segments_ast2500_spi1, 332 .flash_window_base = ASPEED_SOC_SPI_FLASH_BASE, 333 .flash_window_size = 0x8000000, 334 .has_dma = false, 335 .nregs = ASPEED_SMC_R_MAX, 336 .segment_to_reg = aspeed_smc_segment_to_reg, 337 .reg_to_segment = aspeed_smc_reg_to_segment, 338 }, { 339 .name = "aspeed.spi2-ast2500", 340 .r_conf = R_CONF, 341 .r_ce_ctrl = R_CE_CTRL, 342 .r_ctrl0 = R_CTRL0, 343 .r_timings = R_TIMINGS, 344 .nregs_timings = 1, 345 .conf_enable_w0 = CONF_ENABLE_W0, 346 .max_slaves = 2, 347 .segments = aspeed_segments_ast2500_spi2, 348 .flash_window_base = ASPEED_SOC_SPI2_FLASH_BASE, 349 .flash_window_size = 0x8000000, 350 .has_dma = false, 351 .nregs = ASPEED_SMC_R_MAX, 352 .segment_to_reg = aspeed_smc_segment_to_reg, 353 .reg_to_segment = aspeed_smc_reg_to_segment, 354 }, { 355 .name = "aspeed.fmc-ast2600", 356 .r_conf = R_CONF, 357 .r_ce_ctrl = R_CE_CTRL, 358 .r_ctrl0 = R_CTRL0, 359 .r_timings = R_TIMINGS, 360 .nregs_timings = 1, 361 .conf_enable_w0 = CONF_ENABLE_W0, 362 .max_slaves = 3, 363 .segments = aspeed_segments_ast2600_fmc, 364 .flash_window_base = ASPEED26_SOC_FMC_FLASH_BASE, 365 .flash_window_size = 0x10000000, 366 .has_dma = true, 367 .dma_flash_mask = 0x0FFFFFFC, 368 .dma_dram_mask = 0x3FFFFFFC, 369 .nregs = ASPEED_SMC_R_MAX, 370 .segment_to_reg = aspeed_2600_smc_segment_to_reg, 371 .reg_to_segment = aspeed_2600_smc_reg_to_segment, 372 }, { 373 .name = "aspeed.spi1-ast2600", 374 .r_conf = R_CONF, 375 .r_ce_ctrl = R_CE_CTRL, 376 .r_ctrl0 = R_CTRL0, 377 .r_timings = R_TIMINGS, 378 .nregs_timings = 2, 379 .conf_enable_w0 = CONF_ENABLE_W0, 380 .max_slaves = 2, 381 .segments = aspeed_segments_ast2600_spi1, 382 .flash_window_base = ASPEED26_SOC_SPI_FLASH_BASE, 383 .flash_window_size = 0x10000000, 384 .has_dma = true, 385 .dma_flash_mask = 0x0FFFFFFC, 386 .dma_dram_mask = 0x3FFFFFFC, 387 .nregs = ASPEED_SMC_R_MAX, 388 .segment_to_reg = aspeed_2600_smc_segment_to_reg, 389 .reg_to_segment = aspeed_2600_smc_reg_to_segment, 390 }, { 391 .name = "aspeed.spi2-ast2600", 392 .r_conf = R_CONF, 393 .r_ce_ctrl = R_CE_CTRL, 394 .r_ctrl0 = R_CTRL0, 395 .r_timings = R_TIMINGS, 396 .nregs_timings = 3, 397 .conf_enable_w0 = CONF_ENABLE_W0, 398 .max_slaves = 3, 399 .segments = aspeed_segments_ast2600_spi2, 400 .flash_window_base = ASPEED26_SOC_SPI2_FLASH_BASE, 401 .flash_window_size = 0x10000000, 402 .has_dma = true, 403 .dma_flash_mask = 0x0FFFFFFC, 404 .dma_dram_mask = 0x3FFFFFFC, 405 .nregs = ASPEED_SMC_R_MAX, 406 .segment_to_reg = aspeed_2600_smc_segment_to_reg, 407 .reg_to_segment = aspeed_2600_smc_reg_to_segment, 408 }, 409 }; 410 411 /* 412 * The Segment Registers of the AST2400 and AST2500 have a 8MB 413 * unit. The address range of a flash SPI slave is encoded with 414 * absolute addresses which should be part of the overall controller 415 * window. 416 */ 417 static uint32_t aspeed_smc_segment_to_reg(const AspeedSMCState *s, 418 const AspeedSegments *seg) 419 { 420 uint32_t reg = 0; 421 reg |= ((seg->addr >> 23) & SEG_START_MASK) << SEG_START_SHIFT; 422 reg |= (((seg->addr + seg->size) >> 23) & SEG_END_MASK) << SEG_END_SHIFT; 423 return reg; 424 } 425 426 static void aspeed_smc_reg_to_segment(const AspeedSMCState *s, 427 uint32_t reg, AspeedSegments *seg) 428 { 429 seg->addr = ((reg >> SEG_START_SHIFT) & SEG_START_MASK) << 23; 430 seg->size = (((reg >> SEG_END_SHIFT) & SEG_END_MASK) << 23) - seg->addr; 431 } 432 433 /* 434 * The Segment Registers of the AST2600 have a 1MB unit. The address 435 * range of a flash SPI slave is encoded with offsets in the overall 436 * controller window. The previous SoC AST2400 and AST2500 used 437 * absolute addresses. Only bits [27:20] are relevant and the end 438 * address is an upper bound limit. 439 */ 440 #define AST2600_SEG_ADDR_MASK 0x0ff00000 441 442 static uint32_t aspeed_2600_smc_segment_to_reg(const AspeedSMCState *s, 443 const AspeedSegments *seg) 444 { 445 uint32_t reg = 0; 446 447 /* Disabled segments have a nil register */ 448 if (!seg->size) { 449 return 0; 450 } 451 452 reg |= (seg->addr & AST2600_SEG_ADDR_MASK) >> 16; /* start offset */ 453 reg |= (seg->addr + seg->size - 1) & AST2600_SEG_ADDR_MASK; /* end offset */ 454 return reg; 455 } 456 457 static void aspeed_2600_smc_reg_to_segment(const AspeedSMCState *s, 458 uint32_t reg, AspeedSegments *seg) 459 { 460 uint32_t start_offset = (reg << 16) & AST2600_SEG_ADDR_MASK; 461 uint32_t end_offset = reg & AST2600_SEG_ADDR_MASK; 462 463 if (reg) { 464 seg->addr = s->ctrl->flash_window_base + start_offset; 465 seg->size = end_offset + MiB - start_offset; 466 } else { 467 seg->addr = s->ctrl->flash_window_base; 468 seg->size = 0; 469 } 470 } 471 472 static bool aspeed_smc_flash_overlap(const AspeedSMCState *s, 473 const AspeedSegments *new, 474 int cs) 475 { 476 AspeedSegments seg; 477 int i; 478 479 for (i = 0; i < s->ctrl->max_slaves; i++) { 480 if (i == cs) { 481 continue; 482 } 483 484 s->ctrl->reg_to_segment(s, s->regs[R_SEG_ADDR0 + i], &seg); 485 486 if (new->addr + new->size > seg.addr && 487 new->addr < seg.addr + seg.size) { 488 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment CS%d [ 0x%" 489 HWADDR_PRIx" - 0x%"HWADDR_PRIx" ] overlaps with " 490 "CS%d [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", 491 s->ctrl->name, cs, new->addr, new->addr + new->size, 492 i, seg.addr, seg.addr + seg.size); 493 return true; 494 } 495 } 496 return false; 497 } 498 499 static void aspeed_smc_flash_set_segment_region(AspeedSMCState *s, int cs, 500 uint64_t regval) 501 { 502 AspeedSMCFlash *fl = &s->flashes[cs]; 503 AspeedSegments seg; 504 505 s->ctrl->reg_to_segment(s, regval, &seg); 506 507 memory_region_transaction_begin(); 508 memory_region_set_size(&fl->mmio, seg.size); 509 memory_region_set_address(&fl->mmio, seg.addr - s->ctrl->flash_window_base); 510 memory_region_set_enabled(&fl->mmio, !!seg.size); 511 memory_region_transaction_commit(); 512 513 s->regs[R_SEG_ADDR0 + cs] = regval; 514 } 515 516 static void aspeed_smc_flash_set_segment(AspeedSMCState *s, int cs, 517 uint64_t new) 518 { 519 AspeedSegments seg; 520 521 s->ctrl->reg_to_segment(s, new, &seg); 522 523 trace_aspeed_smc_flash_set_segment(cs, new, seg.addr, seg.addr + seg.size); 524 525 /* The start address of CS0 is read-only */ 526 if (cs == 0 && seg.addr != s->ctrl->flash_window_base) { 527 qemu_log_mask(LOG_GUEST_ERROR, 528 "%s: Tried to change CS0 start address to 0x%" 529 HWADDR_PRIx "\n", s->ctrl->name, seg.addr); 530 seg.addr = s->ctrl->flash_window_base; 531 new = s->ctrl->segment_to_reg(s, &seg); 532 } 533 534 /* 535 * The end address of the AST2500 spi controllers is also 536 * read-only. 537 */ 538 if ((s->ctrl->segments == aspeed_segments_ast2500_spi1 || 539 s->ctrl->segments == aspeed_segments_ast2500_spi2) && 540 cs == s->ctrl->max_slaves && 541 seg.addr + seg.size != s->ctrl->segments[cs].addr + 542 s->ctrl->segments[cs].size) { 543 qemu_log_mask(LOG_GUEST_ERROR, 544 "%s: Tried to change CS%d end address to 0x%" 545 HWADDR_PRIx "\n", s->ctrl->name, cs, seg.addr + seg.size); 546 seg.size = s->ctrl->segments[cs].addr + s->ctrl->segments[cs].size - 547 seg.addr; 548 new = s->ctrl->segment_to_reg(s, &seg); 549 } 550 551 /* Keep the segment in the overall flash window */ 552 if (seg.size && 553 (seg.addr + seg.size <= s->ctrl->flash_window_base || 554 seg.addr > s->ctrl->flash_window_base + s->ctrl->flash_window_size)) { 555 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is invalid : " 556 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", 557 s->ctrl->name, cs, seg.addr, seg.addr + seg.size); 558 return; 559 } 560 561 /* Check start address vs. alignment */ 562 if (seg.size && !QEMU_IS_ALIGNED(seg.addr, seg.size)) { 563 qemu_log_mask(LOG_GUEST_ERROR, "%s: new segment for CS%d is not " 564 "aligned : [ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", 565 s->ctrl->name, cs, seg.addr, seg.addr + seg.size); 566 } 567 568 /* And segments should not overlap (in the specs) */ 569 aspeed_smc_flash_overlap(s, &seg, cs); 570 571 /* All should be fine now to move the region */ 572 aspeed_smc_flash_set_segment_region(s, cs, new); 573 } 574 575 static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr, 576 unsigned size) 577 { 578 qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u" 579 PRIx64 "\n", __func__, addr, size); 580 return 0; 581 } 582 583 static void aspeed_smc_flash_default_write(void *opaque, hwaddr addr, 584 uint64_t data, unsigned size) 585 { 586 qemu_log_mask(LOG_GUEST_ERROR, "%s: To 0x%" HWADDR_PRIx " of size %u: 0x%" 587 PRIx64 "\n", __func__, addr, size, data); 588 } 589 590 static const MemoryRegionOps aspeed_smc_flash_default_ops = { 591 .read = aspeed_smc_flash_default_read, 592 .write = aspeed_smc_flash_default_write, 593 .endianness = DEVICE_LITTLE_ENDIAN, 594 .valid = { 595 .min_access_size = 1, 596 .max_access_size = 4, 597 }, 598 }; 599 600 static inline int aspeed_smc_flash_mode(const AspeedSMCFlash *fl) 601 { 602 const AspeedSMCState *s = fl->controller; 603 604 return s->regs[s->r_ctrl0 + fl->id] & CTRL_CMD_MODE_MASK; 605 } 606 607 static inline bool aspeed_smc_is_writable(const AspeedSMCFlash *fl) 608 { 609 const AspeedSMCState *s = fl->controller; 610 611 return s->regs[s->r_conf] & (1 << (s->conf_enable_w0 + fl->id)); 612 } 613 614 static inline int aspeed_smc_flash_cmd(const AspeedSMCFlash *fl) 615 { 616 const AspeedSMCState *s = fl->controller; 617 int cmd = (s->regs[s->r_ctrl0 + fl->id] >> CTRL_CMD_SHIFT) & CTRL_CMD_MASK; 618 619 /* 620 * In read mode, the default SPI command is READ (0x3). In other 621 * modes, the command should necessarily be defined 622 * 623 * TODO: add support for READ4 (0x13) on AST2600 624 */ 625 if (aspeed_smc_flash_mode(fl) == CTRL_READMODE) { 626 cmd = SPI_OP_READ; 627 } 628 629 if (!cmd) { 630 qemu_log_mask(LOG_GUEST_ERROR, "%s: no command defined for mode %d\n", 631 __func__, aspeed_smc_flash_mode(fl)); 632 } 633 634 return cmd; 635 } 636 637 static inline int aspeed_smc_flash_is_4byte(const AspeedSMCFlash *fl) 638 { 639 const AspeedSMCState *s = fl->controller; 640 641 if (s->ctrl->segments == aspeed_segments_spi) { 642 return s->regs[s->r_ctrl0] & CTRL_AST2400_SPI_4BYTE; 643 } else { 644 return s->regs[s->r_ce_ctrl] & (1 << (CTRL_EXTENDED0 + fl->id)); 645 } 646 } 647 648 static void aspeed_smc_flash_do_select(AspeedSMCFlash *fl, bool unselect) 649 { 650 AspeedSMCState *s = fl->controller; 651 652 trace_aspeed_smc_flash_select(fl->id, unselect ? "un" : ""); 653 654 qemu_set_irq(s->cs_lines[fl->id], unselect); 655 } 656 657 static void aspeed_smc_flash_select(AspeedSMCFlash *fl) 658 { 659 aspeed_smc_flash_do_select(fl, false); 660 } 661 662 static void aspeed_smc_flash_unselect(AspeedSMCFlash *fl) 663 { 664 aspeed_smc_flash_do_select(fl, true); 665 } 666 667 static uint32_t aspeed_smc_check_segment_addr(const AspeedSMCFlash *fl, 668 uint32_t addr) 669 { 670 const AspeedSMCState *s = fl->controller; 671 AspeedSegments seg; 672 673 s->ctrl->reg_to_segment(s, s->regs[R_SEG_ADDR0 + fl->id], &seg); 674 if ((addr % seg.size) != addr) { 675 qemu_log_mask(LOG_GUEST_ERROR, 676 "%s: invalid address 0x%08x for CS%d segment : " 677 "[ 0x%"HWADDR_PRIx" - 0x%"HWADDR_PRIx" ]\n", 678 s->ctrl->name, addr, fl->id, seg.addr, 679 seg.addr + seg.size); 680 addr %= seg.size; 681 } 682 683 return addr; 684 } 685 686 static int aspeed_smc_flash_dummies(const AspeedSMCFlash *fl) 687 { 688 const AspeedSMCState *s = fl->controller; 689 uint32_t r_ctrl0 = s->regs[s->r_ctrl0 + fl->id]; 690 uint32_t dummy_high = (r_ctrl0 >> CTRL_DUMMY_HIGH_SHIFT) & 0x1; 691 uint32_t dummy_low = (r_ctrl0 >> CTRL_DUMMY_LOW_SHIFT) & 0x3; 692 uint32_t dummies = ((dummy_high << 2) | dummy_low) * 8; 693 694 if (r_ctrl0 & CTRL_IO_DUAL_ADDR_DATA) { 695 dummies /= 2; 696 } 697 698 return dummies; 699 } 700 701 static void aspeed_smc_flash_setup(AspeedSMCFlash *fl, uint32_t addr) 702 { 703 const AspeedSMCState *s = fl->controller; 704 uint8_t cmd = aspeed_smc_flash_cmd(fl); 705 int i; 706 707 /* Flash access can not exceed CS segment */ 708 addr = aspeed_smc_check_segment_addr(fl, addr); 709 710 ssi_transfer(s->spi, cmd); 711 712 if (aspeed_smc_flash_is_4byte(fl)) { 713 ssi_transfer(s->spi, (addr >> 24) & 0xff); 714 } 715 ssi_transfer(s->spi, (addr >> 16) & 0xff); 716 ssi_transfer(s->spi, (addr >> 8) & 0xff); 717 ssi_transfer(s->spi, (addr & 0xff)); 718 719 /* 720 * Use fake transfers to model dummy bytes. The value should 721 * be configured to some non-zero value in fast read mode and 722 * zero in read mode. But, as the HW allows inconsistent 723 * settings, let's check for fast read mode. 724 */ 725 if (aspeed_smc_flash_mode(fl) == CTRL_FREADMODE) { 726 for (i = 0; i < aspeed_smc_flash_dummies(fl); i++) { 727 ssi_transfer(fl->controller->spi, s->regs[R_DUMMY_DATA] & 0xff); 728 } 729 } 730 } 731 732 static uint64_t aspeed_smc_flash_read(void *opaque, hwaddr addr, unsigned size) 733 { 734 AspeedSMCFlash *fl = opaque; 735 AspeedSMCState *s = fl->controller; 736 uint64_t ret = 0; 737 int i; 738 739 switch (aspeed_smc_flash_mode(fl)) { 740 case CTRL_USERMODE: 741 for (i = 0; i < size; i++) { 742 ret |= ssi_transfer(s->spi, 0x0) << (8 * i); 743 } 744 break; 745 case CTRL_READMODE: 746 case CTRL_FREADMODE: 747 aspeed_smc_flash_select(fl); 748 aspeed_smc_flash_setup(fl, addr); 749 750 for (i = 0; i < size; i++) { 751 ret |= ssi_transfer(s->spi, 0x0) << (8 * i); 752 } 753 754 aspeed_smc_flash_unselect(fl); 755 break; 756 default: 757 qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n", 758 __func__, aspeed_smc_flash_mode(fl)); 759 } 760 761 trace_aspeed_smc_flash_read(fl->id, addr, size, ret, 762 aspeed_smc_flash_mode(fl)); 763 return ret; 764 } 765 766 /* 767 * TODO (clg@kaod.org): stolen from xilinx_spips.c. Should move to a 768 * common include header. 769 */ 770 typedef enum { 771 READ = 0x3, READ_4 = 0x13, 772 FAST_READ = 0xb, FAST_READ_4 = 0x0c, 773 DOR = 0x3b, DOR_4 = 0x3c, 774 QOR = 0x6b, QOR_4 = 0x6c, 775 DIOR = 0xbb, DIOR_4 = 0xbc, 776 QIOR = 0xeb, QIOR_4 = 0xec, 777 778 PP = 0x2, PP_4 = 0x12, 779 DPP = 0xa2, 780 QPP = 0x32, QPP_4 = 0x34, 781 } FlashCMD; 782 783 static int aspeed_smc_num_dummies(uint8_t command) 784 { 785 switch (command) { /* check for dummies */ 786 case READ: /* no dummy bytes/cycles */ 787 case PP: 788 case DPP: 789 case QPP: 790 case READ_4: 791 case PP_4: 792 case QPP_4: 793 return 0; 794 case FAST_READ: 795 case DOR: 796 case QOR: 797 case FAST_READ_4: 798 case DOR_4: 799 case QOR_4: 800 return 1; 801 case DIOR: 802 case DIOR_4: 803 return 2; 804 case QIOR: 805 case QIOR_4: 806 return 4; 807 default: 808 return -1; 809 } 810 } 811 812 static bool aspeed_smc_do_snoop(AspeedSMCFlash *fl, uint64_t data, 813 unsigned size) 814 { 815 AspeedSMCState *s = fl->controller; 816 uint8_t addr_width = aspeed_smc_flash_is_4byte(fl) ? 4 : 3; 817 818 trace_aspeed_smc_do_snoop(fl->id, s->snoop_index, s->snoop_dummies, 819 (uint8_t) data & 0xff); 820 821 if (s->snoop_index == SNOOP_OFF) { 822 return false; /* Do nothing */ 823 824 } else if (s->snoop_index == SNOOP_START) { 825 uint8_t cmd = data & 0xff; 826 int ndummies = aspeed_smc_num_dummies(cmd); 827 828 /* 829 * No dummy cycles are expected with the current command. Turn 830 * off snooping and let the transfer proceed normally. 831 */ 832 if (ndummies <= 0) { 833 s->snoop_index = SNOOP_OFF; 834 return false; 835 } 836 837 s->snoop_dummies = ndummies * 8; 838 839 } else if (s->snoop_index >= addr_width + 1) { 840 841 /* The SPI transfer has reached the dummy cycles sequence */ 842 for (; s->snoop_dummies; s->snoop_dummies--) { 843 ssi_transfer(s->spi, s->regs[R_DUMMY_DATA] & 0xff); 844 } 845 846 /* If no more dummy cycles are expected, turn off snooping */ 847 if (!s->snoop_dummies) { 848 s->snoop_index = SNOOP_OFF; 849 } else { 850 s->snoop_index += size; 851 } 852 853 /* 854 * Dummy cycles have been faked already. Ignore the current 855 * SPI transfer 856 */ 857 return true; 858 } 859 860 s->snoop_index += size; 861 return false; 862 } 863 864 static void aspeed_smc_flash_write(void *opaque, hwaddr addr, uint64_t data, 865 unsigned size) 866 { 867 AspeedSMCFlash *fl = opaque; 868 AspeedSMCState *s = fl->controller; 869 int i; 870 871 trace_aspeed_smc_flash_write(fl->id, addr, size, data, 872 aspeed_smc_flash_mode(fl)); 873 874 if (!aspeed_smc_is_writable(fl)) { 875 qemu_log_mask(LOG_GUEST_ERROR, "%s: flash is not writable at 0x%" 876 HWADDR_PRIx "\n", __func__, addr); 877 return; 878 } 879 880 switch (aspeed_smc_flash_mode(fl)) { 881 case CTRL_USERMODE: 882 if (aspeed_smc_do_snoop(fl, data, size)) { 883 break; 884 } 885 886 for (i = 0; i < size; i++) { 887 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 888 } 889 break; 890 case CTRL_WRITEMODE: 891 aspeed_smc_flash_select(fl); 892 aspeed_smc_flash_setup(fl, addr); 893 894 for (i = 0; i < size; i++) { 895 ssi_transfer(s->spi, (data >> (8 * i)) & 0xff); 896 } 897 898 aspeed_smc_flash_unselect(fl); 899 break; 900 default: 901 qemu_log_mask(LOG_GUEST_ERROR, "%s: invalid flash mode %d\n", 902 __func__, aspeed_smc_flash_mode(fl)); 903 } 904 } 905 906 static const MemoryRegionOps aspeed_smc_flash_ops = { 907 .read = aspeed_smc_flash_read, 908 .write = aspeed_smc_flash_write, 909 .endianness = DEVICE_LITTLE_ENDIAN, 910 .valid = { 911 .min_access_size = 1, 912 .max_access_size = 4, 913 }, 914 }; 915 916 static void aspeed_smc_flash_update_ctrl(AspeedSMCFlash *fl, uint32_t value) 917 { 918 AspeedSMCState *s = fl->controller; 919 bool unselect; 920 921 /* User mode selects the CS, other modes unselect */ 922 unselect = (value & CTRL_CMD_MODE_MASK) != CTRL_USERMODE; 923 924 /* A change of CTRL_CE_STOP_ACTIVE from 0 to 1, unselects the CS */ 925 if (!(s->regs[s->r_ctrl0 + fl->id] & CTRL_CE_STOP_ACTIVE) && 926 value & CTRL_CE_STOP_ACTIVE) { 927 unselect = true; 928 } 929 930 s->regs[s->r_ctrl0 + fl->id] = value; 931 932 s->snoop_index = unselect ? SNOOP_OFF : SNOOP_START; 933 934 aspeed_smc_flash_do_select(fl, unselect); 935 } 936 937 static void aspeed_smc_reset(DeviceState *d) 938 { 939 AspeedSMCState *s = ASPEED_SMC(d); 940 int i; 941 942 memset(s->regs, 0, sizeof s->regs); 943 944 /* Unselect all slaves */ 945 for (i = 0; i < s->num_cs; ++i) { 946 s->regs[s->r_ctrl0 + i] |= CTRL_CE_STOP_ACTIVE; 947 qemu_set_irq(s->cs_lines[i], true); 948 } 949 950 /* setup the default segment register values and regions for all */ 951 for (i = 0; i < s->ctrl->max_slaves; ++i) { 952 aspeed_smc_flash_set_segment_region(s, i, 953 s->ctrl->segment_to_reg(s, &s->ctrl->segments[i])); 954 } 955 956 /* HW strapping flash type for the AST2600 controllers */ 957 if (s->ctrl->segments == aspeed_segments_ast2600_fmc) { 958 /* flash type is fixed to SPI for all */ 959 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); 960 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1); 961 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE2); 962 } 963 964 /* HW strapping flash type for FMC controllers */ 965 if (s->ctrl->segments == aspeed_segments_ast2500_fmc) { 966 /* flash type is fixed to SPI for CE0 and CE1 */ 967 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); 968 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1); 969 } 970 971 /* HW strapping for AST2400 FMC controllers (SCU70). Let's use the 972 * configuration of the palmetto-bmc machine */ 973 if (s->ctrl->segments == aspeed_segments_fmc) { 974 s->regs[s->r_conf] |= (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0); 975 } 976 977 s->snoop_index = SNOOP_OFF; 978 s->snoop_dummies = 0; 979 } 980 981 static uint64_t aspeed_smc_read(void *opaque, hwaddr addr, unsigned int size) 982 { 983 AspeedSMCState *s = ASPEED_SMC(opaque); 984 985 addr >>= 2; 986 987 if (addr == s->r_conf || 988 (addr >= s->r_timings && 989 addr < s->r_timings + s->ctrl->nregs_timings) || 990 addr == s->r_ce_ctrl || 991 addr == R_INTR_CTRL || 992 addr == R_DUMMY_DATA || 993 (s->ctrl->has_dma && addr == R_DMA_CTRL) || 994 (s->ctrl->has_dma && addr == R_DMA_FLASH_ADDR) || 995 (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) || 996 (s->ctrl->has_dma && addr == R_DMA_LEN) || 997 (s->ctrl->has_dma && addr == R_DMA_CHECKSUM) || 998 (addr >= R_SEG_ADDR0 && addr < R_SEG_ADDR0 + s->ctrl->max_slaves) || 999 (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->ctrl->max_slaves)) { 1000 1001 trace_aspeed_smc_read(addr, size, s->regs[addr]); 1002 1003 return s->regs[addr]; 1004 } else { 1005 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 1006 __func__, addr); 1007 return -1; 1008 } 1009 } 1010 1011 static uint8_t aspeed_smc_hclk_divisor(uint8_t hclk_mask) 1012 { 1013 /* HCLK/1 .. HCLK/16 */ 1014 const uint8_t hclk_divisors[] = { 1015 15, 7, 14, 6, 13, 5, 12, 4, 11, 3, 10, 2, 9, 1, 8, 0 1016 }; 1017 int i; 1018 1019 for (i = 0; i < ARRAY_SIZE(hclk_divisors); i++) { 1020 if (hclk_mask == hclk_divisors[i]) { 1021 return i + 1; 1022 } 1023 } 1024 1025 qemu_log_mask(LOG_GUEST_ERROR, "invalid HCLK mask %x", hclk_mask); 1026 return 0; 1027 } 1028 1029 /* 1030 * When doing calibration, the SPI clock rate in the CE0 Control 1031 * Register and the read delay cycles in the Read Timing Compensation 1032 * Register are set using bit[11:4] of the DMA Control Register. 1033 */ 1034 static void aspeed_smc_dma_calibration(AspeedSMCState *s) 1035 { 1036 uint8_t delay = 1037 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 1038 uint8_t hclk_mask = 1039 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 1040 uint8_t hclk_div = aspeed_smc_hclk_divisor(hclk_mask); 1041 uint32_t hclk_shift = (hclk_div - 1) << 2; 1042 uint8_t cs; 1043 1044 /* 1045 * The Read Timing Compensation Register values apply to all CS on 1046 * the SPI bus and only HCLK/1 - HCLK/5 can have tunable delays 1047 */ 1048 if (hclk_div && hclk_div < 6) { 1049 s->regs[s->r_timings] &= ~(0xf << hclk_shift); 1050 s->regs[s->r_timings] |= delay << hclk_shift; 1051 } 1052 1053 /* 1054 * TODO: compute the CS from the DMA address and the segment 1055 * registers. This is not really a problem for now because the 1056 * Timing Register values apply to all CS and software uses CS0 to 1057 * do calibration. 1058 */ 1059 cs = 0; 1060 s->regs[s->r_ctrl0 + cs] &= 1061 ~(CE_CTRL_CLOCK_FREQ_MASK << CE_CTRL_CLOCK_FREQ_SHIFT); 1062 s->regs[s->r_ctrl0 + cs] |= CE_CTRL_CLOCK_FREQ(hclk_div); 1063 } 1064 1065 /* 1066 * Emulate read errors in the DMA Checksum Register for high 1067 * frequencies and optimistic settings of the Read Timing Compensation 1068 * Register. This will help in tuning the SPI timing calibration 1069 * algorithm. 1070 */ 1071 static bool aspeed_smc_inject_read_failure(AspeedSMCState *s) 1072 { 1073 uint8_t delay = 1074 (s->regs[R_DMA_CTRL] >> DMA_CTRL_DELAY_SHIFT) & DMA_CTRL_DELAY_MASK; 1075 uint8_t hclk_mask = 1076 (s->regs[R_DMA_CTRL] >> DMA_CTRL_FREQ_SHIFT) & DMA_CTRL_FREQ_MASK; 1077 1078 /* 1079 * Typical values of a palmetto-bmc machine. 1080 */ 1081 switch (aspeed_smc_hclk_divisor(hclk_mask)) { 1082 case 4 ... 16: 1083 return false; 1084 case 3: /* at least one HCLK cycle delay */ 1085 return (delay & 0x7) < 1; 1086 case 2: /* at least two HCLK cycle delay */ 1087 return (delay & 0x7) < 2; 1088 case 1: /* (> 100MHz) is above the max freq of the controller */ 1089 return true; 1090 default: 1091 g_assert_not_reached(); 1092 } 1093 } 1094 1095 /* 1096 * Accumulate the result of the reads to provide a checksum that will 1097 * be used to validate the read timing settings. 1098 */ 1099 static void aspeed_smc_dma_checksum(AspeedSMCState *s) 1100 { 1101 MemTxResult result; 1102 uint32_t data; 1103 1104 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 1105 qemu_log_mask(LOG_GUEST_ERROR, 1106 "%s: invalid direction for DMA checksum\n", __func__); 1107 return; 1108 } 1109 1110 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CALIB) { 1111 aspeed_smc_dma_calibration(s); 1112 } 1113 1114 while (s->regs[R_DMA_LEN]) { 1115 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 1116 MEMTXATTRS_UNSPECIFIED, &result); 1117 if (result != MEMTX_OK) { 1118 qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash read failed @%08x\n", 1119 __func__, s->regs[R_DMA_FLASH_ADDR]); 1120 return; 1121 } 1122 trace_aspeed_smc_dma_checksum(s->regs[R_DMA_FLASH_ADDR], data); 1123 1124 /* 1125 * When the DMA is on-going, the DMA registers are updated 1126 * with the current working addresses and length. 1127 */ 1128 s->regs[R_DMA_CHECKSUM] += data; 1129 s->regs[R_DMA_FLASH_ADDR] += 4; 1130 s->regs[R_DMA_LEN] -= 4; 1131 } 1132 1133 if (s->inject_failure && aspeed_smc_inject_read_failure(s)) { 1134 s->regs[R_DMA_CHECKSUM] = 0xbadc0de; 1135 } 1136 1137 } 1138 1139 static void aspeed_smc_dma_rw(AspeedSMCState *s) 1140 { 1141 MemTxResult result; 1142 uint32_t data; 1143 1144 trace_aspeed_smc_dma_rw(s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE ? 1145 "write" : "read", 1146 s->regs[R_DMA_FLASH_ADDR], 1147 s->regs[R_DMA_DRAM_ADDR], 1148 s->regs[R_DMA_LEN]); 1149 while (s->regs[R_DMA_LEN]) { 1150 if (s->regs[R_DMA_CTRL] & DMA_CTRL_WRITE) { 1151 data = address_space_ldl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], 1152 MEMTXATTRS_UNSPECIFIED, &result); 1153 if (result != MEMTX_OK) { 1154 qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM read failed @%08x\n", 1155 __func__, s->regs[R_DMA_DRAM_ADDR]); 1156 return; 1157 } 1158 1159 address_space_stl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 1160 data, MEMTXATTRS_UNSPECIFIED, &result); 1161 if (result != MEMTX_OK) { 1162 qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash write failed @%08x\n", 1163 __func__, s->regs[R_DMA_FLASH_ADDR]); 1164 return; 1165 } 1166 } else { 1167 data = address_space_ldl_le(&s->flash_as, s->regs[R_DMA_FLASH_ADDR], 1168 MEMTXATTRS_UNSPECIFIED, &result); 1169 if (result != MEMTX_OK) { 1170 qemu_log_mask(LOG_GUEST_ERROR, "%s: Flash read failed @%08x\n", 1171 __func__, s->regs[R_DMA_FLASH_ADDR]); 1172 return; 1173 } 1174 1175 address_space_stl_le(&s->dram_as, s->regs[R_DMA_DRAM_ADDR], 1176 data, MEMTXATTRS_UNSPECIFIED, &result); 1177 if (result != MEMTX_OK) { 1178 qemu_log_mask(LOG_GUEST_ERROR, "%s: DRAM write failed @%08x\n", 1179 __func__, s->regs[R_DMA_DRAM_ADDR]); 1180 return; 1181 } 1182 } 1183 1184 /* 1185 * When the DMA is on-going, the DMA registers are updated 1186 * with the current working addresses and length. 1187 */ 1188 s->regs[R_DMA_FLASH_ADDR] += 4; 1189 s->regs[R_DMA_DRAM_ADDR] += 4; 1190 s->regs[R_DMA_LEN] -= 4; 1191 s->regs[R_DMA_CHECKSUM] += data; 1192 } 1193 } 1194 1195 static void aspeed_smc_dma_stop(AspeedSMCState *s) 1196 { 1197 /* 1198 * When the DMA is disabled, INTR_CTRL_DMA_STATUS=0 means the 1199 * engine is idle 1200 */ 1201 s->regs[R_INTR_CTRL] &= ~INTR_CTRL_DMA_STATUS; 1202 s->regs[R_DMA_CHECKSUM] = 0; 1203 1204 /* 1205 * Lower the DMA irq in any case. The IRQ control register could 1206 * have been cleared before disabling the DMA. 1207 */ 1208 qemu_irq_lower(s->irq); 1209 } 1210 1211 /* 1212 * When INTR_CTRL_DMA_STATUS=1, the DMA has completed and a new DMA 1213 * can start even if the result of the previous was not collected. 1214 */ 1215 static bool aspeed_smc_dma_in_progress(AspeedSMCState *s) 1216 { 1217 return s->regs[R_DMA_CTRL] & DMA_CTRL_ENABLE && 1218 !(s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_STATUS); 1219 } 1220 1221 static void aspeed_smc_dma_done(AspeedSMCState *s) 1222 { 1223 s->regs[R_INTR_CTRL] |= INTR_CTRL_DMA_STATUS; 1224 if (s->regs[R_INTR_CTRL] & INTR_CTRL_DMA_EN) { 1225 qemu_irq_raise(s->irq); 1226 } 1227 } 1228 1229 static void aspeed_smc_dma_ctrl(AspeedSMCState *s, uint64_t dma_ctrl) 1230 { 1231 if (!(dma_ctrl & DMA_CTRL_ENABLE)) { 1232 s->regs[R_DMA_CTRL] = dma_ctrl; 1233 1234 aspeed_smc_dma_stop(s); 1235 return; 1236 } 1237 1238 if (aspeed_smc_dma_in_progress(s)) { 1239 qemu_log_mask(LOG_GUEST_ERROR, "%s: DMA in progress\n", __func__); 1240 return; 1241 } 1242 1243 s->regs[R_DMA_CTRL] = dma_ctrl; 1244 1245 if (s->regs[R_DMA_CTRL] & DMA_CTRL_CKSUM) { 1246 aspeed_smc_dma_checksum(s); 1247 } else { 1248 aspeed_smc_dma_rw(s); 1249 } 1250 1251 aspeed_smc_dma_done(s); 1252 } 1253 1254 static void aspeed_smc_write(void *opaque, hwaddr addr, uint64_t data, 1255 unsigned int size) 1256 { 1257 AspeedSMCState *s = ASPEED_SMC(opaque); 1258 uint32_t value = data; 1259 1260 addr >>= 2; 1261 1262 trace_aspeed_smc_write(addr, size, data); 1263 1264 if (addr == s->r_conf || 1265 (addr >= s->r_timings && 1266 addr < s->r_timings + s->ctrl->nregs_timings) || 1267 addr == s->r_ce_ctrl) { 1268 s->regs[addr] = value; 1269 } else if (addr >= s->r_ctrl0 && addr < s->r_ctrl0 + s->num_cs) { 1270 int cs = addr - s->r_ctrl0; 1271 aspeed_smc_flash_update_ctrl(&s->flashes[cs], value); 1272 } else if (addr >= R_SEG_ADDR0 && 1273 addr < R_SEG_ADDR0 + s->ctrl->max_slaves) { 1274 int cs = addr - R_SEG_ADDR0; 1275 1276 if (value != s->regs[R_SEG_ADDR0 + cs]) { 1277 aspeed_smc_flash_set_segment(s, cs, value); 1278 } 1279 } else if (addr == R_DUMMY_DATA) { 1280 s->regs[addr] = value & 0xff; 1281 } else if (addr == R_INTR_CTRL) { 1282 s->regs[addr] = value; 1283 } else if (s->ctrl->has_dma && addr == R_DMA_CTRL) { 1284 aspeed_smc_dma_ctrl(s, value); 1285 } else if (s->ctrl->has_dma && addr == R_DMA_DRAM_ADDR) { 1286 s->regs[addr] = DMA_DRAM_ADDR(s, value); 1287 } else if (s->ctrl->has_dma && addr == R_DMA_FLASH_ADDR) { 1288 s->regs[addr] = DMA_FLASH_ADDR(s, value); 1289 } else if (s->ctrl->has_dma && addr == R_DMA_LEN) { 1290 s->regs[addr] = DMA_LENGTH(value); 1291 } else { 1292 qemu_log_mask(LOG_UNIMP, "%s: not implemented: 0x%" HWADDR_PRIx "\n", 1293 __func__, addr); 1294 return; 1295 } 1296 } 1297 1298 static const MemoryRegionOps aspeed_smc_ops = { 1299 .read = aspeed_smc_read, 1300 .write = aspeed_smc_write, 1301 .endianness = DEVICE_LITTLE_ENDIAN, 1302 .valid.unaligned = true, 1303 }; 1304 1305 1306 /* 1307 * Initialize the custom address spaces for DMAs 1308 */ 1309 static void aspeed_smc_dma_setup(AspeedSMCState *s, Error **errp) 1310 { 1311 char *name; 1312 1313 if (!s->dram_mr) { 1314 error_setg(errp, TYPE_ASPEED_SMC ": 'dram' link not set"); 1315 return; 1316 } 1317 1318 name = g_strdup_printf("%s-dma-flash", s->ctrl->name); 1319 address_space_init(&s->flash_as, &s->mmio_flash, name); 1320 g_free(name); 1321 1322 name = g_strdup_printf("%s-dma-dram", s->ctrl->name); 1323 address_space_init(&s->dram_as, s->dram_mr, name); 1324 g_free(name); 1325 } 1326 1327 static void aspeed_smc_realize(DeviceState *dev, Error **errp) 1328 { 1329 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1330 AspeedSMCState *s = ASPEED_SMC(dev); 1331 AspeedSMCClass *mc = ASPEED_SMC_GET_CLASS(s); 1332 int i; 1333 char name[32]; 1334 hwaddr offset = 0; 1335 1336 s->ctrl = mc->ctrl; 1337 1338 /* keep a copy under AspeedSMCState to speed up accesses */ 1339 s->r_conf = s->ctrl->r_conf; 1340 s->r_ce_ctrl = s->ctrl->r_ce_ctrl; 1341 s->r_ctrl0 = s->ctrl->r_ctrl0; 1342 s->r_timings = s->ctrl->r_timings; 1343 s->conf_enable_w0 = s->ctrl->conf_enable_w0; 1344 1345 /* Enforce some real HW limits */ 1346 if (s->num_cs > s->ctrl->max_slaves) { 1347 qemu_log_mask(LOG_GUEST_ERROR, "%s: num_cs cannot exceed: %d\n", 1348 __func__, s->ctrl->max_slaves); 1349 s->num_cs = s->ctrl->max_slaves; 1350 } 1351 1352 /* DMA irq. Keep it first for the initialization in the SoC */ 1353 sysbus_init_irq(sbd, &s->irq); 1354 1355 s->spi = ssi_create_bus(dev, "spi"); 1356 1357 /* Setup cs_lines for slaves */ 1358 s->cs_lines = g_new0(qemu_irq, s->num_cs); 1359 ssi_auto_connect_slaves(dev, s->cs_lines, s->spi); 1360 1361 for (i = 0; i < s->num_cs; ++i) { 1362 sysbus_init_irq(sbd, &s->cs_lines[i]); 1363 } 1364 1365 /* The memory region for the controller registers */ 1366 memory_region_init_io(&s->mmio, OBJECT(s), &aspeed_smc_ops, s, 1367 s->ctrl->name, s->ctrl->nregs * 4); 1368 sysbus_init_mmio(sbd, &s->mmio); 1369 1370 /* 1371 * The container memory region representing the address space 1372 * window in which the flash modules are mapped. The size and 1373 * address depends on the SoC model and controller type. 1374 */ 1375 snprintf(name, sizeof(name), "%s.flash", s->ctrl->name); 1376 1377 memory_region_init_io(&s->mmio_flash, OBJECT(s), 1378 &aspeed_smc_flash_default_ops, s, name, 1379 s->ctrl->flash_window_size); 1380 sysbus_init_mmio(sbd, &s->mmio_flash); 1381 1382 s->flashes = g_new0(AspeedSMCFlash, s->ctrl->max_slaves); 1383 1384 /* 1385 * Let's create a sub memory region for each possible slave. All 1386 * have a configurable memory segment in the overall flash mapping 1387 * window of the controller but, there is not necessarily a flash 1388 * module behind to handle the memory accesses. This depends on 1389 * the board configuration. 1390 */ 1391 for (i = 0; i < s->ctrl->max_slaves; ++i) { 1392 AspeedSMCFlash *fl = &s->flashes[i]; 1393 1394 snprintf(name, sizeof(name), "%s.%d", s->ctrl->name, i); 1395 1396 fl->id = i; 1397 fl->controller = s; 1398 fl->size = s->ctrl->segments[i].size; 1399 memory_region_init_io(&fl->mmio, OBJECT(s), &aspeed_smc_flash_ops, 1400 fl, name, fl->size); 1401 memory_region_add_subregion(&s->mmio_flash, offset, &fl->mmio); 1402 offset += fl->size; 1403 } 1404 1405 /* DMA support */ 1406 if (s->ctrl->has_dma) { 1407 aspeed_smc_dma_setup(s, errp); 1408 } 1409 } 1410 1411 static const VMStateDescription vmstate_aspeed_smc = { 1412 .name = "aspeed.smc", 1413 .version_id = 2, 1414 .minimum_version_id = 2, 1415 .fields = (VMStateField[]) { 1416 VMSTATE_UINT32_ARRAY(regs, AspeedSMCState, ASPEED_SMC_R_MAX), 1417 VMSTATE_UINT8(snoop_index, AspeedSMCState), 1418 VMSTATE_UINT8(snoop_dummies, AspeedSMCState), 1419 VMSTATE_END_OF_LIST() 1420 } 1421 }; 1422 1423 static Property aspeed_smc_properties[] = { 1424 DEFINE_PROP_UINT32("num-cs", AspeedSMCState, num_cs, 1), 1425 DEFINE_PROP_BOOL("inject-failure", AspeedSMCState, inject_failure, false), 1426 DEFINE_PROP_UINT64("sdram-base", AspeedSMCState, sdram_base, 0), 1427 DEFINE_PROP_LINK("dram", AspeedSMCState, dram_mr, 1428 TYPE_MEMORY_REGION, MemoryRegion *), 1429 DEFINE_PROP_END_OF_LIST(), 1430 }; 1431 1432 static void aspeed_smc_class_init(ObjectClass *klass, void *data) 1433 { 1434 DeviceClass *dc = DEVICE_CLASS(klass); 1435 AspeedSMCClass *mc = ASPEED_SMC_CLASS(klass); 1436 1437 dc->realize = aspeed_smc_realize; 1438 dc->reset = aspeed_smc_reset; 1439 device_class_set_props(dc, aspeed_smc_properties); 1440 dc->vmsd = &vmstate_aspeed_smc; 1441 mc->ctrl = data; 1442 } 1443 1444 static const TypeInfo aspeed_smc_info = { 1445 .name = TYPE_ASPEED_SMC, 1446 .parent = TYPE_SYS_BUS_DEVICE, 1447 .instance_size = sizeof(AspeedSMCState), 1448 .class_size = sizeof(AspeedSMCClass), 1449 .abstract = true, 1450 }; 1451 1452 static void aspeed_smc_register_types(void) 1453 { 1454 int i; 1455 1456 type_register_static(&aspeed_smc_info); 1457 for (i = 0; i < ARRAY_SIZE(controllers); ++i) { 1458 TypeInfo ti = { 1459 .name = controllers[i].name, 1460 .parent = TYPE_ASPEED_SMC, 1461 .class_init = aspeed_smc_class_init, 1462 .class_data = (void *)&controllers[i], 1463 }; 1464 type_register(&ti); 1465 } 1466 } 1467 1468 type_init(aspeed_smc_register_types) 1469