xref: /openbmc/qemu/hw/sparc/leon3.c (revision 354908ce)
1 /*
2  * QEMU Leon3 System Emulator
3  *
4  * Copyright (c) 2010-2019 AdaCore
5  *
6  * Permission is hereby granted, free of charge, to any person obtaining a copy
7  * of this software and associated documentation files (the "Software"), to deal
8  * in the Software without restriction, including without limitation the rights
9  * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10  * copies of the Software, and to permit persons to whom the Software is
11  * furnished to do so, subject to the following conditions:
12  *
13  * The above copyright notice and this permission notice shall be included in
14  * all copies or substantial portions of the Software.
15  *
16  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17  * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18  * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19  * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21  * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22  * THE SOFTWARE.
23  */
24 
25 #include "qemu/osdep.h"
26 #include "qemu/units.h"
27 #include "qemu/error-report.h"
28 #include "qapi/error.h"
29 #include "qemu-common.h"
30 #include "cpu.h"
31 #include "hw/irq.h"
32 #include "qemu/timer.h"
33 #include "hw/ptimer.h"
34 #include "hw/qdev-properties.h"
35 #include "sysemu/sysemu.h"
36 #include "sysemu/qtest.h"
37 #include "sysemu/reset.h"
38 #include "hw/boards.h"
39 #include "hw/loader.h"
40 #include "elf.h"
41 #include "trace.h"
42 #include "exec/address-spaces.h"
43 
44 #include "hw/sparc/grlib.h"
45 #include "hw/misc/grlib_ahb_apb_pnp.h"
46 
47 /* Default system clock.  */
48 #define CPU_CLK (40 * 1000 * 1000)
49 
50 #define LEON3_PROM_FILENAME "u-boot.bin"
51 #define LEON3_PROM_OFFSET    (0x00000000)
52 #define LEON3_RAM_OFFSET     (0x40000000)
53 
54 #define MAX_PILS 16
55 
56 #define LEON3_UART_OFFSET  (0x80000100)
57 #define LEON3_UART_IRQ     (3)
58 
59 #define LEON3_IRQMP_OFFSET (0x80000200)
60 
61 #define LEON3_TIMER_OFFSET (0x80000300)
62 #define LEON3_TIMER_IRQ    (6)
63 #define LEON3_TIMER_COUNT  (2)
64 
65 #define LEON3_APB_PNP_OFFSET (0x800FF000)
66 #define LEON3_AHB_PNP_OFFSET (0xFFFFF000)
67 
68 typedef struct ResetData {
69     SPARCCPU *cpu;
70     uint32_t  entry;            /* save kernel entry in case of reset */
71     target_ulong sp;            /* initial stack pointer */
72 } ResetData;
73 
74 static uint32_t *gen_store_u32(uint32_t *code, hwaddr addr, uint32_t val)
75 {
76     stl_p(code++, 0x82100000); /* mov %g0, %g1                */
77     stl_p(code++, 0x84100000); /* mov %g0, %g2                */
78     stl_p(code++, 0x03000000 +
79       extract32(addr, 10, 22));
80                                /* sethi %hi(addr), %g1        */
81     stl_p(code++, 0x82106000 +
82       extract32(addr, 0, 10));
83                                /* or %g1, addr, %g1           */
84     stl_p(code++, 0x05000000 +
85       extract32(val, 10, 22));
86                                /* sethi %hi(val), %g2         */
87     stl_p(code++, 0x8410a000 +
88       extract32(val, 0, 10));
89                                /* or %g2, val, %g2            */
90     stl_p(code++, 0xc4204000); /* st %g2, [ %g1 ]             */
91 
92     return code;
93 }
94 
95 /*
96  * When loading a kernel in RAM the machine is expected to be in a different
97  * state (eg: initialized by the bootloader). This little code reproduces
98  * this behavior.
99  */
100 static void write_bootloader(CPUSPARCState *env, uint8_t *base,
101                              hwaddr kernel_addr)
102 {
103     uint32_t *p = (uint32_t *) base;
104 
105     /* Initialize the UARTs                                        */
106     /* *UART_CONTROL = UART_RECEIVE_ENABLE | UART_TRANSMIT_ENABLE; */
107     p = gen_store_u32(p, 0x80000108, 3);
108 
109     /* Initialize the TIMER 0                                      */
110     /* *GPTIMER_SCALER_RELOAD = 40 - 1;                            */
111     p = gen_store_u32(p, 0x80000304, 39);
112     /* *GPTIMER0_COUNTER_RELOAD = 0xFFFE;                          */
113     p = gen_store_u32(p, 0x80000314, 0xFFFFFFFE);
114     /* *GPTIMER0_CONFIG = GPTIMER_ENABLE | GPTIMER_RESTART;        */
115     p = gen_store_u32(p, 0x80000318, 3);
116 
117     /* JUMP to the entry point                                     */
118     stl_p(p++, 0x82100000); /* mov %g0, %g1 */
119     stl_p(p++, 0x03000000 + extract32(kernel_addr, 10, 22));
120                             /* sethi %hi(kernel_addr), %g1 */
121     stl_p(p++, 0x82106000 + extract32(kernel_addr, 0, 10));
122                             /* or kernel_addr, %g1 */
123     stl_p(p++, 0x81c04000); /* jmp  %g1 */
124     stl_p(p++, 0x01000000); /* nop */
125 }
126 
127 static void main_cpu_reset(void *opaque)
128 {
129     ResetData *s   = (ResetData *)opaque;
130     CPUState *cpu = CPU(s->cpu);
131     CPUSPARCState  *env = &s->cpu->env;
132 
133     cpu_reset(cpu);
134 
135     cpu->halted = 0;
136     env->pc     = s->entry;
137     env->npc    = s->entry + 4;
138     env->regbase[6] = s->sp;
139 }
140 
141 void leon3_irq_ack(void *irq_manager, int intno)
142 {
143     grlib_irqmp_ack((DeviceState *)irq_manager, intno);
144 }
145 
146 /*
147  * This device assumes that the incoming 'level' value on the
148  * qemu_irq is the interrupt number, not just a simple 0/1 level.
149  */
150 static void leon3_set_pil_in(void *opaque, int n, int level)
151 {
152     CPUSPARCState *env = opaque;
153     uint32_t pil_in = level;
154     CPUState *cs;
155 
156     assert(env != NULL);
157 
158     env->pil_in = pil_in;
159 
160     if (env->pil_in && (env->interrupt_index == 0 ||
161                         (env->interrupt_index & ~15) == TT_EXTINT)) {
162         unsigned int i;
163 
164         for (i = 15; i > 0; i--) {
165             if (env->pil_in & (1 << i)) {
166                 int old_interrupt = env->interrupt_index;
167 
168                 env->interrupt_index = TT_EXTINT | i;
169                 if (old_interrupt != env->interrupt_index) {
170                     cs = env_cpu(env);
171                     trace_leon3_set_irq(i);
172                     cpu_interrupt(cs, CPU_INTERRUPT_HARD);
173                 }
174                 break;
175             }
176         }
177     } else if (!env->pil_in && (env->interrupt_index & ~15) == TT_EXTINT) {
178         cs = env_cpu(env);
179         trace_leon3_reset_irq(env->interrupt_index & 15);
180         env->interrupt_index = 0;
181         cpu_reset_interrupt(cs, CPU_INTERRUPT_HARD);
182     }
183 }
184 
185 static void leon3_generic_hw_init(MachineState *machine)
186 {
187     ram_addr_t ram_size = machine->ram_size;
188     const char *kernel_filename = machine->kernel_filename;
189     SPARCCPU *cpu;
190     CPUSPARCState   *env;
191     MemoryRegion *address_space_mem = get_system_memory();
192     MemoryRegion *prom = g_new(MemoryRegion, 1);
193     int         ret;
194     char       *filename;
195     qemu_irq   *cpu_irqs = NULL;
196     int         bios_size;
197     int         prom_size;
198     ResetData  *reset_info;
199     DeviceState *dev;
200     int i;
201     AHBPnp *ahb_pnp;
202     APBPnp *apb_pnp;
203 
204     /* Init CPU */
205     cpu = SPARC_CPU(cpu_create(machine->cpu_type));
206     env = &cpu->env;
207 
208     cpu_sparc_set_id(env, 0);
209 
210     /* Reset data */
211     reset_info        = g_malloc0(sizeof(ResetData));
212     reset_info->cpu   = cpu;
213     reset_info->sp    = LEON3_RAM_OFFSET + ram_size;
214     qemu_register_reset(main_cpu_reset, reset_info);
215 
216     ahb_pnp = GRLIB_AHB_PNP(qdev_new(TYPE_GRLIB_AHB_PNP));
217     sysbus_realize_and_unref(SYS_BUS_DEVICE(ahb_pnp), &error_fatal);
218     sysbus_mmio_map(SYS_BUS_DEVICE(ahb_pnp), 0, LEON3_AHB_PNP_OFFSET);
219     grlib_ahb_pnp_add_entry(ahb_pnp, 0, 0, GRLIB_VENDOR_GAISLER,
220                             GRLIB_LEON3_DEV, GRLIB_AHB_MASTER,
221                             GRLIB_CPU_AREA);
222 
223     apb_pnp = GRLIB_APB_PNP(qdev_new(TYPE_GRLIB_APB_PNP));
224     sysbus_realize_and_unref(SYS_BUS_DEVICE(apb_pnp), &error_fatal);
225     sysbus_mmio_map(SYS_BUS_DEVICE(apb_pnp), 0, LEON3_APB_PNP_OFFSET);
226     grlib_ahb_pnp_add_entry(ahb_pnp, LEON3_APB_PNP_OFFSET, 0xFFF,
227                             GRLIB_VENDOR_GAISLER, GRLIB_APBMST_DEV,
228                             GRLIB_AHB_SLAVE, GRLIB_AHBMEM_AREA);
229 
230     /* Allocate IRQ manager */
231     dev = qdev_new(TYPE_GRLIB_IRQMP);
232     qdev_init_gpio_in_named_with_opaque(DEVICE(cpu), leon3_set_pil_in,
233                                         env, "pil", 1);
234     qdev_connect_gpio_out_named(dev, "grlib-irq", 0,
235                                 qdev_get_gpio_in_named(DEVICE(cpu), "pil", 0));
236     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
237     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, LEON3_IRQMP_OFFSET);
238     env->irq_manager = dev;
239     env->qemu_irq_ack = leon3_irq_manager;
240     cpu_irqs = qemu_allocate_irqs(grlib_irqmp_set_irq, dev, MAX_PILS);
241     grlib_apb_pnp_add_entry(apb_pnp, LEON3_IRQMP_OFFSET, 0xFFF,
242                             GRLIB_VENDOR_GAISLER, GRLIB_IRQMP_DEV,
243                             2, 0, GRLIB_APBIO_AREA);
244 
245     /* Allocate RAM */
246     if (ram_size > 1 * GiB) {
247         error_report("Too much memory for this machine: %" PRId64 "MB,"
248                      " maximum 1G",
249                      ram_size / MiB);
250         exit(1);
251     }
252 
253     memory_region_add_subregion(address_space_mem, LEON3_RAM_OFFSET,
254                                 machine->ram);
255 
256     /* Allocate BIOS */
257     prom_size = 8 * MiB;
258     memory_region_init_rom(prom, NULL, "Leon3.bios", prom_size, &error_fatal);
259     memory_region_add_subregion(address_space_mem, LEON3_PROM_OFFSET, prom);
260 
261     /* Load boot prom */
262     if (bios_name == NULL) {
263         bios_name = LEON3_PROM_FILENAME;
264     }
265     filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name);
266 
267     if (filename) {
268         bios_size = get_image_size(filename);
269     } else {
270         bios_size = -1;
271     }
272 
273     if (bios_size > prom_size) {
274         error_report("could not load prom '%s': file too big", filename);
275         exit(1);
276     }
277 
278     if (bios_size > 0) {
279         ret = load_image_targphys(filename, LEON3_PROM_OFFSET, bios_size);
280         if (ret < 0 || ret > prom_size) {
281             error_report("could not load prom '%s'", filename);
282             exit(1);
283         }
284     } else if (kernel_filename == NULL && !qtest_enabled()) {
285         error_report("Can't read bios image '%s'", filename
286                                                    ? filename
287                                                    : LEON3_PROM_FILENAME);
288         exit(1);
289     }
290     g_free(filename);
291 
292     /* Can directly load an application. */
293     if (kernel_filename != NULL) {
294         long     kernel_size;
295         uint64_t entry;
296 
297         kernel_size = load_elf(kernel_filename, NULL, NULL, NULL,
298                                &entry, NULL, NULL, NULL,
299                                1 /* big endian */, EM_SPARC, 0, 0);
300         if (kernel_size < 0) {
301             kernel_size = load_uimage(kernel_filename, NULL, &entry,
302                                       NULL, NULL, NULL);
303         }
304         if (kernel_size < 0) {
305             error_report("could not load kernel '%s'", kernel_filename);
306             exit(1);
307         }
308         if (bios_size <= 0) {
309             /*
310              * If there is no bios/monitor just start the application but put
311              * the machine in an initialized state through a little
312              * bootloader.
313              */
314             uint8_t *bootloader_entry;
315 
316             bootloader_entry = memory_region_get_ram_ptr(prom);
317             write_bootloader(env, bootloader_entry, entry);
318             env->pc = LEON3_PROM_OFFSET;
319             env->npc = LEON3_PROM_OFFSET + 4;
320             reset_info->entry = LEON3_PROM_OFFSET;
321         }
322     }
323 
324     /* Allocate timers */
325     dev = qdev_new(TYPE_GRLIB_GPTIMER);
326     qdev_prop_set_uint32(dev, "nr-timers", LEON3_TIMER_COUNT);
327     qdev_prop_set_uint32(dev, "frequency", CPU_CLK);
328     qdev_prop_set_uint32(dev, "irq-line", LEON3_TIMER_IRQ);
329     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
330 
331     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, LEON3_TIMER_OFFSET);
332     for (i = 0; i < LEON3_TIMER_COUNT; i++) {
333         sysbus_connect_irq(SYS_BUS_DEVICE(dev), i,
334                            cpu_irqs[LEON3_TIMER_IRQ + i]);
335     }
336 
337     grlib_apb_pnp_add_entry(apb_pnp, LEON3_TIMER_OFFSET, 0xFFF,
338                             GRLIB_VENDOR_GAISLER, GRLIB_GPTIMER_DEV,
339                             0, LEON3_TIMER_IRQ, GRLIB_APBIO_AREA);
340 
341     /* Allocate uart */
342     dev = qdev_new(TYPE_GRLIB_APB_UART);
343     qdev_prop_set_chr(dev, "chrdev", serial_hd(0));
344     sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal);
345     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, LEON3_UART_OFFSET);
346     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, cpu_irqs[LEON3_UART_IRQ]);
347     grlib_apb_pnp_add_entry(apb_pnp, LEON3_UART_OFFSET, 0xFFF,
348                             GRLIB_VENDOR_GAISLER, GRLIB_APBUART_DEV, 1,
349                             LEON3_UART_IRQ, GRLIB_APBIO_AREA);
350 }
351 
352 static void leon3_generic_machine_init(MachineClass *mc)
353 {
354     mc->desc = "Leon-3 generic";
355     mc->init = leon3_generic_hw_init;
356     mc->default_cpu_type = SPARC_CPU_TYPE_NAME("LEON3");
357     mc->default_ram_id = "leon3.ram";
358 }
359 
360 DEFINE_MACHINE("leon3_generic", leon3_generic_machine_init)
361