1# See docs/devel/tracing.txt for syntax documentation. 2 3# hw/sd/sdhci.c 4sdhci_set_inserted(const char *level) "card state changed: %s" 5sdhci_send_command(uint8_t cmd, uint32_t arg) "CMD%02u ARG[0x%08x]" 6sdhci_error(const char *msg) "%s" 7sdhci_response4(uint32_t r0) "RSPREG[31..0]=0x%08x" 8sdhci_response16(uint32_t r3, uint32_t r2, uint32_t r1, uint32_t r0) "RSPREG[127..96]=0x%08x, RSPREG[95..64]=0x%08x, RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x" 9sdhci_end_transfer(uint8_t cmd, uint32_t arg) "Automatically issue CMD%02u 0x%08x" 10sdhci_adma(const char *desc, uint32_t sysad) "%s: admasysaddr=0x%" PRIx32 11sdhci_adma_loop(uint64_t addr, uint16_t length, uint8_t attr) "addr=0x%08" PRIx64 ", len=%d, attr=0x%x" 12sdhci_adma_transfer_completed(void) "" 13sdhci_access(const char *access, unsigned int size, uint64_t offset, const char *dir, uint64_t val, uint64_t val2) "%s%u: addr[0x%04" PRIx64 "] %s 0x%08" PRIx64 " (%" PRIu64 ")" 14sdhci_read_dataport(uint16_t data_count) "all %u bytes of data have been read from input buffer" 15sdhci_write_dataport(uint16_t data_count) "write buffer filled with %u bytes of data" 16 17# hw/sd/milkymist-memcard.c 18milkymist_memcard_memory_read(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 19milkymist_memcard_memory_write(uint32_t addr, uint32_t value) "addr 0x%08x value 0x%08x" 20 21# hw/sd/pxa2xx_mmci.c 22pxa2xx_mmci_read(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x" 23pxa2xx_mmci_write(uint8_t size, uint32_t addr, uint32_t value) "size %d addr 0x%02x value 0x%08x" 24