1 /* 2 * SSI to SD card adapter. 3 * 4 * Copyright (c) 2007-2009 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "sysemu/blockdev.h" 15 #include "hw/ssi/ssi.h" 16 #include "migration/vmstate.h" 17 #include "hw/qdev-properties.h" 18 #include "hw/sd/sd.h" 19 #include "qapi/error.h" 20 #include "qemu/module.h" 21 #include "qom/object.h" 22 23 //#define DEBUG_SSI_SD 1 24 25 #ifdef DEBUG_SSI_SD 26 #define DPRINTF(fmt, ...) \ 27 do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0) 28 #define BADF(fmt, ...) \ 29 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) 30 #else 31 #define DPRINTF(fmt, ...) do {} while(0) 32 #define BADF(fmt, ...) \ 33 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0) 34 #endif 35 36 typedef enum { 37 SSI_SD_CMD = 0, 38 SSI_SD_CMDARG, 39 SSI_SD_RESPONSE, 40 SSI_SD_DATA_START, 41 SSI_SD_DATA_READ, 42 } ssi_sd_mode; 43 44 struct ssi_sd_state { 45 SSIPeripheral ssidev; 46 uint32_t mode; 47 int cmd; 48 uint8_t cmdarg[4]; 49 uint8_t response[5]; 50 int32_t arglen; 51 int32_t response_pos; 52 int32_t stopping; 53 SDBus sdbus; 54 }; 55 56 #define TYPE_SSI_SD "ssi-sd" 57 OBJECT_DECLARE_SIMPLE_TYPE(ssi_sd_state, SSI_SD) 58 59 /* State word bits. */ 60 #define SSI_SDR_LOCKED 0x0001 61 #define SSI_SDR_WP_ERASE 0x0002 62 #define SSI_SDR_ERROR 0x0004 63 #define SSI_SDR_CC_ERROR 0x0008 64 #define SSI_SDR_ECC_FAILED 0x0010 65 #define SSI_SDR_WP_VIOLATION 0x0020 66 #define SSI_SDR_ERASE_PARAM 0x0040 67 #define SSI_SDR_OUT_OF_RANGE 0x0080 68 #define SSI_SDR_IDLE 0x0100 69 #define SSI_SDR_ERASE_RESET 0x0200 70 #define SSI_SDR_ILLEGAL_COMMAND 0x0400 71 #define SSI_SDR_COM_CRC_ERROR 0x0800 72 #define SSI_SDR_ERASE_SEQ_ERROR 0x1000 73 #define SSI_SDR_ADDRESS_ERROR 0x2000 74 #define SSI_SDR_PARAMETER_ERROR 0x4000 75 76 static uint32_t ssi_sd_transfer(SSIPeripheral *dev, uint32_t val) 77 { 78 ssi_sd_state *s = SSI_SD(dev); 79 80 /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ 81 if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { 82 s->mode = SSI_SD_CMD; 83 /* There must be at least one byte delay before the card responds. */ 84 s->stopping = 1; 85 } 86 87 switch (s->mode) { 88 case SSI_SD_CMD: 89 if (val == 0xff) { 90 DPRINTF("NULL command\n"); 91 return 0xff; 92 } 93 s->cmd = val & 0x3f; 94 s->mode = SSI_SD_CMDARG; 95 s->arglen = 0; 96 return 0xff; 97 case SSI_SD_CMDARG: 98 if (s->arglen == 4) { 99 SDRequest request; 100 uint8_t longresp[16]; 101 /* FIXME: Check CRC. */ 102 request.cmd = s->cmd; 103 request.arg = ldl_be_p(s->cmdarg); 104 DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg); 105 s->arglen = sdbus_do_command(&s->sdbus, &request, longresp); 106 if (s->arglen <= 0) { 107 s->arglen = 1; 108 s->response[0] = 4; 109 DPRINTF("SD command failed\n"); 110 } else if (s->cmd == 58) { 111 /* CMD58 returns R3 response (OCR) */ 112 DPRINTF("Returned OCR\n"); 113 s->arglen = 5; 114 s->response[0] = 1; 115 memcpy(&s->response[1], longresp, 4); 116 } else if (s->arglen != 4) { 117 BADF("Unexpected response to cmd %d\n", s->cmd); 118 /* Illegal command is about as near as we can get. */ 119 s->arglen = 1; 120 s->response[0] = 4; 121 } else { 122 /* All other commands return status. */ 123 uint32_t cardstatus; 124 uint16_t status; 125 /* CMD13 returns a 2-byte statuse work. Other commands 126 only return the first byte. */ 127 s->arglen = (s->cmd == 13) ? 2 : 1; 128 cardstatus = ldl_be_p(longresp); 129 status = 0; 130 if (((cardstatus >> 9) & 0xf) < 4) 131 status |= SSI_SDR_IDLE; 132 if (cardstatus & ERASE_RESET) 133 status |= SSI_SDR_ERASE_RESET; 134 if (cardstatus & ILLEGAL_COMMAND) 135 status |= SSI_SDR_ILLEGAL_COMMAND; 136 if (cardstatus & COM_CRC_ERROR) 137 status |= SSI_SDR_COM_CRC_ERROR; 138 if (cardstatus & ERASE_SEQ_ERROR) 139 status |= SSI_SDR_ERASE_SEQ_ERROR; 140 if (cardstatus & ADDRESS_ERROR) 141 status |= SSI_SDR_ADDRESS_ERROR; 142 if (cardstatus & CARD_IS_LOCKED) 143 status |= SSI_SDR_LOCKED; 144 if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP)) 145 status |= SSI_SDR_WP_ERASE; 146 if (cardstatus & SD_ERROR) 147 status |= SSI_SDR_ERROR; 148 if (cardstatus & CC_ERROR) 149 status |= SSI_SDR_CC_ERROR; 150 if (cardstatus & CARD_ECC_FAILED) 151 status |= SSI_SDR_ECC_FAILED; 152 if (cardstatus & WP_VIOLATION) 153 status |= SSI_SDR_WP_VIOLATION; 154 if (cardstatus & ERASE_PARAM) 155 status |= SSI_SDR_ERASE_PARAM; 156 if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE)) 157 status |= SSI_SDR_OUT_OF_RANGE; 158 /* ??? Don't know what Parameter Error really means, so 159 assume it's set if the second byte is nonzero. */ 160 if (status & 0xff) 161 status |= SSI_SDR_PARAMETER_ERROR; 162 s->response[0] = status >> 8; 163 s->response[1] = status; 164 DPRINTF("Card status 0x%02x\n", status); 165 } 166 s->mode = SSI_SD_RESPONSE; 167 s->response_pos = 0; 168 } else { 169 s->cmdarg[s->arglen++] = val; 170 } 171 return 0xff; 172 case SSI_SD_RESPONSE: 173 if (s->stopping) { 174 s->stopping = 0; 175 return 0xff; 176 } 177 if (s->response_pos < s->arglen) { 178 DPRINTF("Response 0x%02x\n", s->response[s->response_pos]); 179 return s->response[s->response_pos++]; 180 } 181 if (sdbus_data_ready(&s->sdbus)) { 182 DPRINTF("Data read\n"); 183 s->mode = SSI_SD_DATA_START; 184 } else { 185 DPRINTF("End of command\n"); 186 s->mode = SSI_SD_CMD; 187 } 188 return 0xff; 189 case SSI_SD_DATA_START: 190 DPRINTF("Start read block\n"); 191 s->mode = SSI_SD_DATA_READ; 192 return 0xfe; 193 case SSI_SD_DATA_READ: 194 val = sdbus_read_byte(&s->sdbus); 195 if (!sdbus_data_ready(&s->sdbus)) { 196 DPRINTF("Data read end\n"); 197 s->mode = SSI_SD_CMD; 198 } 199 return val; 200 } 201 /* Should never happen. */ 202 return 0xff; 203 } 204 205 static int ssi_sd_post_load(void *opaque, int version_id) 206 { 207 ssi_sd_state *s = (ssi_sd_state *)opaque; 208 209 if (s->mode > SSI_SD_DATA_READ) { 210 return -EINVAL; 211 } 212 if (s->mode == SSI_SD_CMDARG && 213 (s->arglen < 0 || s->arglen >= ARRAY_SIZE(s->cmdarg))) { 214 return -EINVAL; 215 } 216 if (s->mode == SSI_SD_RESPONSE && 217 (s->response_pos < 0 || s->response_pos >= ARRAY_SIZE(s->response) || 218 (!s->stopping && s->arglen > ARRAY_SIZE(s->response)))) { 219 return -EINVAL; 220 } 221 222 return 0; 223 } 224 225 static const VMStateDescription vmstate_ssi_sd = { 226 .name = "ssi_sd", 227 .version_id = 2, 228 .minimum_version_id = 2, 229 .post_load = ssi_sd_post_load, 230 .fields = (VMStateField []) { 231 VMSTATE_UINT32(mode, ssi_sd_state), 232 VMSTATE_INT32(cmd, ssi_sd_state), 233 VMSTATE_UINT8_ARRAY(cmdarg, ssi_sd_state, 4), 234 VMSTATE_UINT8_ARRAY(response, ssi_sd_state, 5), 235 VMSTATE_INT32(arglen, ssi_sd_state), 236 VMSTATE_INT32(response_pos, ssi_sd_state), 237 VMSTATE_INT32(stopping, ssi_sd_state), 238 VMSTATE_SSI_PERIPHERAL(ssidev, ssi_sd_state), 239 VMSTATE_END_OF_LIST() 240 } 241 }; 242 243 static void ssi_sd_realize(SSIPeripheral *d, Error **errp) 244 { 245 ERRP_GUARD(); 246 ssi_sd_state *s = SSI_SD(d); 247 DeviceState *carddev; 248 DriveInfo *dinfo; 249 250 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), TYPE_SD_BUS, 251 DEVICE(d), "sd-bus"); 252 253 /* Create and plug in the sd card */ 254 /* FIXME use a qdev drive property instead of drive_get_next() */ 255 dinfo = drive_get_next(IF_SD); 256 carddev = qdev_new(TYPE_SD_CARD); 257 if (dinfo) { 258 if (!qdev_prop_set_drive_err(carddev, "drive", 259 blk_by_legacy_dinfo(dinfo), errp)) { 260 goto fail; 261 } 262 } 263 264 if (!object_property_set_bool(OBJECT(carddev), "spi", true, errp)) { 265 goto fail; 266 } 267 268 if (!qdev_realize_and_unref(carddev, BUS(&s->sdbus), errp)) { 269 goto fail; 270 } 271 272 return; 273 274 fail: 275 error_prepend(errp, "failed to init SD card: "); 276 } 277 278 static void ssi_sd_reset(DeviceState *dev) 279 { 280 ssi_sd_state *s = SSI_SD(dev); 281 282 s->mode = SSI_SD_CMD; 283 s->cmd = 0; 284 memset(s->cmdarg, 0, sizeof(s->cmdarg)); 285 memset(s->response, 0, sizeof(s->response)); 286 s->arglen = 0; 287 s->response_pos = 0; 288 s->stopping = 0; 289 } 290 291 static void ssi_sd_class_init(ObjectClass *klass, void *data) 292 { 293 DeviceClass *dc = DEVICE_CLASS(klass); 294 SSIPeripheralClass *k = SSI_PERIPHERAL_CLASS(klass); 295 296 k->realize = ssi_sd_realize; 297 k->transfer = ssi_sd_transfer; 298 k->cs_polarity = SSI_CS_LOW; 299 dc->vmsd = &vmstate_ssi_sd; 300 dc->reset = ssi_sd_reset; 301 /* Reason: init() method uses drive_get_next() */ 302 dc->user_creatable = false; 303 } 304 305 static const TypeInfo ssi_sd_info = { 306 .name = TYPE_SSI_SD, 307 .parent = TYPE_SSI_PERIPHERAL, 308 .instance_size = sizeof(ssi_sd_state), 309 .class_init = ssi_sd_class_init, 310 }; 311 312 static void ssi_sd_register_types(void) 313 { 314 type_register_static(&ssi_sd_info); 315 } 316 317 type_init(ssi_sd_register_types) 318