1 /* 2 * SSI to SD card adapter. 3 * 4 * Copyright (c) 2007-2009 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the GNU GPL v2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "sysemu/blockdev.h" 14 #include "hw/ssi.h" 15 #include "hw/sd.h" 16 17 //#define DEBUG_SSI_SD 1 18 19 #ifdef DEBUG_SSI_SD 20 #define DPRINTF(fmt, ...) \ 21 do { printf("ssi_sd: " fmt , ## __VA_ARGS__); } while (0) 22 #define BADF(fmt, ...) \ 23 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) 24 #else 25 #define DPRINTF(fmt, ...) do {} while(0) 26 #define BADF(fmt, ...) \ 27 do { fprintf(stderr, "ssi_sd: error: " fmt , ## __VA_ARGS__);} while (0) 28 #endif 29 30 typedef enum { 31 SSI_SD_CMD, 32 SSI_SD_CMDARG, 33 SSI_SD_RESPONSE, 34 SSI_SD_DATA_START, 35 SSI_SD_DATA_READ, 36 } ssi_sd_mode; 37 38 typedef struct { 39 SSISlave ssidev; 40 ssi_sd_mode mode; 41 int cmd; 42 uint8_t cmdarg[4]; 43 uint8_t response[5]; 44 int arglen; 45 int response_pos; 46 int stopping; 47 SDState *sd; 48 } ssi_sd_state; 49 50 /* State word bits. */ 51 #define SSI_SDR_LOCKED 0x0001 52 #define SSI_SDR_WP_ERASE 0x0002 53 #define SSI_SDR_ERROR 0x0004 54 #define SSI_SDR_CC_ERROR 0x0008 55 #define SSI_SDR_ECC_FAILED 0x0010 56 #define SSI_SDR_WP_VIOLATION 0x0020 57 #define SSI_SDR_ERASE_PARAM 0x0040 58 #define SSI_SDR_OUT_OF_RANGE 0x0080 59 #define SSI_SDR_IDLE 0x0100 60 #define SSI_SDR_ERASE_RESET 0x0200 61 #define SSI_SDR_ILLEGAL_COMMAND 0x0400 62 #define SSI_SDR_COM_CRC_ERROR 0x0800 63 #define SSI_SDR_ERASE_SEQ_ERROR 0x1000 64 #define SSI_SDR_ADDRESS_ERROR 0x2000 65 #define SSI_SDR_PARAMETER_ERROR 0x4000 66 67 static uint32_t ssi_sd_transfer(SSISlave *dev, uint32_t val) 68 { 69 ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, dev); 70 71 /* Special case: allow CMD12 (STOP TRANSMISSION) while reading data. */ 72 if (s->mode == SSI_SD_DATA_READ && val == 0x4d) { 73 s->mode = SSI_SD_CMD; 74 /* There must be at least one byte delay before the card responds. */ 75 s->stopping = 1; 76 } 77 78 switch (s->mode) { 79 case SSI_SD_CMD: 80 if (val == 0xff) { 81 DPRINTF("NULL command\n"); 82 return 0xff; 83 } 84 s->cmd = val & 0x3f; 85 s->mode = SSI_SD_CMDARG; 86 s->arglen = 0; 87 return 0xff; 88 case SSI_SD_CMDARG: 89 if (s->arglen == 4) { 90 SDRequest request; 91 uint8_t longresp[16]; 92 /* FIXME: Check CRC. */ 93 request.cmd = s->cmd; 94 request.arg = (s->cmdarg[0] << 24) | (s->cmdarg[1] << 16) 95 | (s->cmdarg[2] << 8) | s->cmdarg[3]; 96 DPRINTF("CMD%d arg 0x%08x\n", s->cmd, request.arg); 97 s->arglen = sd_do_command(s->sd, &request, longresp); 98 if (s->arglen <= 0) { 99 s->arglen = 1; 100 s->response[0] = 4; 101 DPRINTF("SD command failed\n"); 102 } else if (s->cmd == 58) { 103 /* CMD58 returns R3 response (OCR) */ 104 DPRINTF("Returned OCR\n"); 105 s->arglen = 5; 106 s->response[0] = 1; 107 memcpy(&s->response[1], longresp, 4); 108 } else if (s->arglen != 4) { 109 BADF("Unexpected response to cmd %d\n", s->cmd); 110 /* Illegal command is about as near as we can get. */ 111 s->arglen = 1; 112 s->response[0] = 4; 113 } else { 114 /* All other commands return status. */ 115 uint32_t cardstatus; 116 uint16_t status; 117 /* CMD13 returns a 2-byte statuse work. Other commands 118 only return the first byte. */ 119 s->arglen = (s->cmd == 13) ? 2 : 1; 120 cardstatus = (longresp[0] << 24) | (longresp[1] << 16) 121 | (longresp[2] << 8) | longresp[3]; 122 status = 0; 123 if (((cardstatus >> 9) & 0xf) < 4) 124 status |= SSI_SDR_IDLE; 125 if (cardstatus & ERASE_RESET) 126 status |= SSI_SDR_ERASE_RESET; 127 if (cardstatus & ILLEGAL_COMMAND) 128 status |= SSI_SDR_ILLEGAL_COMMAND; 129 if (cardstatus & COM_CRC_ERROR) 130 status |= SSI_SDR_COM_CRC_ERROR; 131 if (cardstatus & ERASE_SEQ_ERROR) 132 status |= SSI_SDR_ERASE_SEQ_ERROR; 133 if (cardstatus & ADDRESS_ERROR) 134 status |= SSI_SDR_ADDRESS_ERROR; 135 if (cardstatus & CARD_IS_LOCKED) 136 status |= SSI_SDR_LOCKED; 137 if (cardstatus & (LOCK_UNLOCK_FAILED | WP_ERASE_SKIP)) 138 status |= SSI_SDR_WP_ERASE; 139 if (cardstatus & SD_ERROR) 140 status |= SSI_SDR_ERROR; 141 if (cardstatus & CC_ERROR) 142 status |= SSI_SDR_CC_ERROR; 143 if (cardstatus & CARD_ECC_FAILED) 144 status |= SSI_SDR_ECC_FAILED; 145 if (cardstatus & WP_VIOLATION) 146 status |= SSI_SDR_WP_VIOLATION; 147 if (cardstatus & ERASE_PARAM) 148 status |= SSI_SDR_ERASE_PARAM; 149 if (cardstatus & (OUT_OF_RANGE | CID_CSD_OVERWRITE)) 150 status |= SSI_SDR_OUT_OF_RANGE; 151 /* ??? Don't know what Parameter Error really means, so 152 assume it's set if the second byte is nonzero. */ 153 if (status & 0xff) 154 status |= SSI_SDR_PARAMETER_ERROR; 155 s->response[0] = status >> 8; 156 s->response[1] = status; 157 DPRINTF("Card status 0x%02x\n", status); 158 } 159 s->mode = SSI_SD_RESPONSE; 160 s->response_pos = 0; 161 } else { 162 s->cmdarg[s->arglen++] = val; 163 } 164 return 0xff; 165 case SSI_SD_RESPONSE: 166 if (s->stopping) { 167 s->stopping = 0; 168 return 0xff; 169 } 170 if (s->response_pos < s->arglen) { 171 DPRINTF("Response 0x%02x\n", s->response[s->response_pos]); 172 return s->response[s->response_pos++]; 173 } 174 if (sd_data_ready(s->sd)) { 175 DPRINTF("Data read\n"); 176 s->mode = SSI_SD_DATA_START; 177 } else { 178 DPRINTF("End of command\n"); 179 s->mode = SSI_SD_CMD; 180 } 181 return 0xff; 182 case SSI_SD_DATA_START: 183 DPRINTF("Start read block\n"); 184 s->mode = SSI_SD_DATA_READ; 185 return 0xfe; 186 case SSI_SD_DATA_READ: 187 val = sd_read_data(s->sd); 188 if (!sd_data_ready(s->sd)) { 189 DPRINTF("Data read end\n"); 190 s->mode = SSI_SD_CMD; 191 } 192 return val; 193 } 194 /* Should never happen. */ 195 return 0xff; 196 } 197 198 static void ssi_sd_save(QEMUFile *f, void *opaque) 199 { 200 SSISlave *ss = SSI_SLAVE(opaque); 201 ssi_sd_state *s = (ssi_sd_state *)opaque; 202 int i; 203 204 qemu_put_be32(f, s->mode); 205 qemu_put_be32(f, s->cmd); 206 for (i = 0; i < 4; i++) 207 qemu_put_be32(f, s->cmdarg[i]); 208 for (i = 0; i < 5; i++) 209 qemu_put_be32(f, s->response[i]); 210 qemu_put_be32(f, s->arglen); 211 qemu_put_be32(f, s->response_pos); 212 qemu_put_be32(f, s->stopping); 213 214 qemu_put_be32(f, ss->cs); 215 } 216 217 static int ssi_sd_load(QEMUFile *f, void *opaque, int version_id) 218 { 219 SSISlave *ss = SSI_SLAVE(opaque); 220 ssi_sd_state *s = (ssi_sd_state *)opaque; 221 int i; 222 223 if (version_id != 1) 224 return -EINVAL; 225 226 s->mode = qemu_get_be32(f); 227 s->cmd = qemu_get_be32(f); 228 for (i = 0; i < 4; i++) 229 s->cmdarg[i] = qemu_get_be32(f); 230 for (i = 0; i < 5; i++) 231 s->response[i] = qemu_get_be32(f); 232 s->arglen = qemu_get_be32(f); 233 s->response_pos = qemu_get_be32(f); 234 s->stopping = qemu_get_be32(f); 235 236 ss->cs = qemu_get_be32(f); 237 238 return 0; 239 } 240 241 static int ssi_sd_init(SSISlave *d) 242 { 243 DeviceState *dev = DEVICE(d); 244 ssi_sd_state *s = FROM_SSI_SLAVE(ssi_sd_state, d); 245 DriveInfo *dinfo; 246 247 s->mode = SSI_SD_CMD; 248 dinfo = drive_get_next(IF_SD); 249 s->sd = sd_init(dinfo ? dinfo->bdrv : NULL, true); 250 if (s->sd == NULL) { 251 return -1; 252 } 253 register_savevm(dev, "ssi_sd", -1, 1, ssi_sd_save, ssi_sd_load, s); 254 return 0; 255 } 256 257 static void ssi_sd_class_init(ObjectClass *klass, void *data) 258 { 259 SSISlaveClass *k = SSI_SLAVE_CLASS(klass); 260 261 k->init = ssi_sd_init; 262 k->transfer = ssi_sd_transfer; 263 k->cs_polarity = SSI_CS_LOW; 264 } 265 266 static const TypeInfo ssi_sd_info = { 267 .name = "ssi-sd", 268 .parent = TYPE_SSI_SLAVE, 269 .instance_size = sizeof(ssi_sd_state), 270 .class_init = ssi_sd_class_init, 271 }; 272 273 static void ssi_sd_register_types(void) 274 { 275 type_register_static(&ssi_sd_info); 276 } 277 278 type_init(ssi_sd_register_types) 279