1 /* 2 * SD Association Host Standard Specification v2.0 controller emulation 3 * 4 * Copyright (c) 2011 Samsung Electronics Co., Ltd. 5 * Mitsyanko Igor <i.mitsyanko@samsung.com> 6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> 7 * 8 * Based on MMC controller for Samsung S5PC1xx-based board emulation 9 * by Alexey Merkulov and Vladimir Monakhov. 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 19 * See the GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License along 22 * with this program; if not, see <http://www.gnu.org/licenses/>. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "hw/hw.h" 27 #include "sysemu/block-backend.h" 28 #include "sysemu/blockdev.h" 29 #include "sysemu/dma.h" 30 #include "qemu/timer.h" 31 #include "qemu/bitops.h" 32 #include "sdhci-internal.h" 33 #include "qemu/log.h" 34 35 /* host controller debug messages */ 36 #ifndef SDHC_DEBUG 37 #define SDHC_DEBUG 0 38 #endif 39 40 #define DPRINT_L1(fmt, args...) \ 41 do { \ 42 if (SDHC_DEBUG) { \ 43 fprintf(stderr, "QEMU SDHC: " fmt, ## args); \ 44 } \ 45 } while (0) 46 #define DPRINT_L2(fmt, args...) \ 47 do { \ 48 if (SDHC_DEBUG > 1) { \ 49 fprintf(stderr, "QEMU SDHC: " fmt, ## args); \ 50 } \ 51 } while (0) 52 #define ERRPRINT(fmt, args...) \ 53 do { \ 54 if (SDHC_DEBUG) { \ 55 fprintf(stderr, "QEMU SDHC ERROR: " fmt, ## args); \ 56 } \ 57 } while (0) 58 59 #define TYPE_SDHCI_BUS "sdhci-bus" 60 #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS) 61 62 /* Default SD/MMC host controller features information, which will be 63 * presented in CAPABILITIES register of generic SD host controller at reset. 64 * If not stated otherwise: 65 * 0 - not supported, 1 - supported, other - prohibited. 66 */ 67 #define SDHC_CAPAB_64BITBUS 0ul /* 64-bit System Bus Support */ 68 #define SDHC_CAPAB_18V 1ul /* Voltage support 1.8v */ 69 #define SDHC_CAPAB_30V 0ul /* Voltage support 3.0v */ 70 #define SDHC_CAPAB_33V 1ul /* Voltage support 3.3v */ 71 #define SDHC_CAPAB_SUSPRESUME 0ul /* Suspend/resume support */ 72 #define SDHC_CAPAB_SDMA 1ul /* SDMA support */ 73 #define SDHC_CAPAB_HIGHSPEED 1ul /* High speed support */ 74 #define SDHC_CAPAB_ADMA1 1ul /* ADMA1 support */ 75 #define SDHC_CAPAB_ADMA2 1ul /* ADMA2 support */ 76 /* Maximum host controller R/W buffers size 77 * Possible values: 512, 1024, 2048 bytes */ 78 #define SDHC_CAPAB_MAXBLOCKLENGTH 512ul 79 /* Maximum clock frequency for SDclock in MHz 80 * value in range 10-63 MHz, 0 - not defined */ 81 #define SDHC_CAPAB_BASECLKFREQ 52ul 82 #define SDHC_CAPAB_TOUNIT 1ul /* Timeout clock unit 0 - kHz, 1 - MHz */ 83 /* Timeout clock frequency 1-63, 0 - not defined */ 84 #define SDHC_CAPAB_TOCLKFREQ 52ul 85 86 /* Now check all parameters and calculate CAPABILITIES REGISTER value */ 87 #if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 || \ 88 SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 || \ 89 SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\ 90 SDHC_CAPAB_TOUNIT > 1 91 #error Capabilities features can have value 0 or 1 only! 92 #endif 93 94 #if SDHC_CAPAB_MAXBLOCKLENGTH == 512 95 #define MAX_BLOCK_LENGTH 0ul 96 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024 97 #define MAX_BLOCK_LENGTH 1ul 98 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048 99 #define MAX_BLOCK_LENGTH 2ul 100 #else 101 #error Max host controller block size can have value 512, 1024 or 2048 only! 102 #endif 103 104 #if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \ 105 SDHC_CAPAB_BASECLKFREQ > 63 106 #error SDclock frequency can have value in range 0, 10-63 only! 107 #endif 108 109 #if SDHC_CAPAB_TOCLKFREQ > 63 110 #error Timeout clock frequency can have value in range 0-63 only! 111 #endif 112 113 #define SDHC_CAPAB_REG_DEFAULT \ 114 ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) | \ 115 (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) | \ 116 (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) | \ 117 (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) | \ 118 (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) | \ 119 (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \ 120 (SDHC_CAPAB_TOCLKFREQ)) 121 122 #define MASK_TRNMOD 0x0037 123 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val)) 124 125 static uint8_t sdhci_slotint(SDHCIState *s) 126 { 127 return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) || 128 ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) || 129 ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV)); 130 } 131 132 static inline void sdhci_update_irq(SDHCIState *s) 133 { 134 qemu_set_irq(s->irq, sdhci_slotint(s)); 135 } 136 137 static void sdhci_raise_insertion_irq(void *opaque) 138 { 139 SDHCIState *s = (SDHCIState *)opaque; 140 141 if (s->norintsts & SDHC_NIS_REMOVE) { 142 timer_mod(s->insert_timer, 143 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); 144 } else { 145 s->prnsts = 0x1ff0000; 146 if (s->norintstsen & SDHC_NISEN_INSERT) { 147 s->norintsts |= SDHC_NIS_INSERT; 148 } 149 sdhci_update_irq(s); 150 } 151 } 152 153 static void sdhci_set_inserted(DeviceState *dev, bool level) 154 { 155 SDHCIState *s = (SDHCIState *)dev; 156 DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject"); 157 158 if ((s->norintsts & SDHC_NIS_REMOVE) && level) { 159 /* Give target some time to notice card ejection */ 160 timer_mod(s->insert_timer, 161 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); 162 } else { 163 if (level) { 164 s->prnsts = 0x1ff0000; 165 if (s->norintstsen & SDHC_NISEN_INSERT) { 166 s->norintsts |= SDHC_NIS_INSERT; 167 } 168 } else { 169 s->prnsts = 0x1fa0000; 170 s->pwrcon &= ~SDHC_POWER_ON; 171 s->clkcon &= ~SDHC_CLOCK_SDCLK_EN; 172 if (s->norintstsen & SDHC_NISEN_REMOVE) { 173 s->norintsts |= SDHC_NIS_REMOVE; 174 } 175 } 176 sdhci_update_irq(s); 177 } 178 } 179 180 static void sdhci_set_readonly(DeviceState *dev, bool level) 181 { 182 SDHCIState *s = (SDHCIState *)dev; 183 184 if (level) { 185 s->prnsts &= ~SDHC_WRITE_PROTECT; 186 } else { 187 /* Write enabled */ 188 s->prnsts |= SDHC_WRITE_PROTECT; 189 } 190 } 191 192 static void sdhci_reset(SDHCIState *s) 193 { 194 DeviceState *dev = DEVICE(s); 195 196 timer_del(s->insert_timer); 197 timer_del(s->transfer_timer); 198 /* Set all registers to 0. Capabilities registers are not cleared 199 * and assumed to always preserve their value, given to them during 200 * initialization */ 201 memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad); 202 203 /* Reset other state based on current card insertion/readonly status */ 204 sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus)); 205 sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus)); 206 207 s->data_count = 0; 208 s->stopped_state = sdhc_not_stopped; 209 s->pending_insert_state = false; 210 } 211 212 static void sdhci_poweron_reset(DeviceState *dev) 213 { 214 /* QOM (ie power-on) reset. This is identical to reset 215 * commanded via device register apart from handling of the 216 * 'pending insert on powerup' quirk. 217 */ 218 SDHCIState *s = (SDHCIState *)dev; 219 220 sdhci_reset(s); 221 222 if (s->pending_insert_quirk) { 223 s->pending_insert_state = true; 224 } 225 } 226 227 static void sdhci_data_transfer(void *opaque); 228 229 static void sdhci_send_command(SDHCIState *s) 230 { 231 SDRequest request; 232 uint8_t response[16]; 233 int rlen; 234 235 s->errintsts = 0; 236 s->acmd12errsts = 0; 237 request.cmd = s->cmdreg >> 8; 238 request.arg = s->argument; 239 DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg); 240 rlen = sdbus_do_command(&s->sdbus, &request, response); 241 242 if (s->cmdreg & SDHC_CMD_RESPONSE) { 243 if (rlen == 4) { 244 s->rspreg[0] = (response[0] << 24) | (response[1] << 16) | 245 (response[2] << 8) | response[3]; 246 s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0; 247 DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]); 248 } else if (rlen == 16) { 249 s->rspreg[0] = (response[11] << 24) | (response[12] << 16) | 250 (response[13] << 8) | response[14]; 251 s->rspreg[1] = (response[7] << 24) | (response[8] << 16) | 252 (response[9] << 8) | response[10]; 253 s->rspreg[2] = (response[3] << 24) | (response[4] << 16) | 254 (response[5] << 8) | response[6]; 255 s->rspreg[3] = (response[0] << 16) | (response[1] << 8) | 256 response[2]; 257 DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.." 258 "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n", 259 s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]); 260 } else { 261 ERRPRINT("Timeout waiting for command response\n"); 262 if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) { 263 s->errintsts |= SDHC_EIS_CMDTIMEOUT; 264 s->norintsts |= SDHC_NIS_ERR; 265 } 266 } 267 268 if ((s->norintstsen & SDHC_NISEN_TRSCMP) && 269 (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { 270 s->norintsts |= SDHC_NIS_TRSCMP; 271 } 272 } 273 274 if (s->norintstsen & SDHC_NISEN_CMDCMP) { 275 s->norintsts |= SDHC_NIS_CMDCMP; 276 } 277 278 sdhci_update_irq(s); 279 280 if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) { 281 s->data_count = 0; 282 sdhci_data_transfer(s); 283 } 284 } 285 286 static void sdhci_end_transfer(SDHCIState *s) 287 { 288 /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */ 289 if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) { 290 SDRequest request; 291 uint8_t response[16]; 292 293 request.cmd = 0x0C; 294 request.arg = 0; 295 DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg); 296 sdbus_do_command(&s->sdbus, &request, response); 297 /* Auto CMD12 response goes to the upper Response register */ 298 s->rspreg[3] = (response[0] << 24) | (response[1] << 16) | 299 (response[2] << 8) | response[3]; 300 } 301 302 s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE | 303 SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT | 304 SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE); 305 306 if (s->norintstsen & SDHC_NISEN_TRSCMP) { 307 s->norintsts |= SDHC_NIS_TRSCMP; 308 } 309 310 sdhci_update_irq(s); 311 } 312 313 /* 314 * Programmed i/o data transfer 315 */ 316 317 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */ 318 static void sdhci_read_block_from_card(SDHCIState *s) 319 { 320 int index = 0; 321 322 if ((s->trnmod & SDHC_TRNS_MULTI) && 323 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) { 324 return; 325 } 326 327 for (index = 0; index < (s->blksize & 0x0fff); index++) { 328 s->fifo_buffer[index] = sdbus_read_data(&s->sdbus); 329 } 330 331 /* New data now available for READ through Buffer Port Register */ 332 s->prnsts |= SDHC_DATA_AVAILABLE; 333 if (s->norintstsen & SDHC_NISEN_RBUFRDY) { 334 s->norintsts |= SDHC_NIS_RBUFRDY; 335 } 336 337 /* Clear DAT line active status if that was the last block */ 338 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 339 ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) { 340 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; 341 } 342 343 /* If stop at block gap request was set and it's not the last block of 344 * data - generate Block Event interrupt */ 345 if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) && 346 s->blkcnt != 1) { 347 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; 348 if (s->norintstsen & SDHC_EISEN_BLKGAP) { 349 s->norintsts |= SDHC_EIS_BLKGAP; 350 } 351 } 352 353 sdhci_update_irq(s); 354 } 355 356 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */ 357 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size) 358 { 359 uint32_t value = 0; 360 int i; 361 362 /* first check that a valid data exists in host controller input buffer */ 363 if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) { 364 ERRPRINT("Trying to read from empty buffer\n"); 365 return 0; 366 } 367 368 for (i = 0; i < size; i++) { 369 value |= s->fifo_buffer[s->data_count] << i * 8; 370 s->data_count++; 371 /* check if we've read all valid data (blksize bytes) from buffer */ 372 if ((s->data_count) >= (s->blksize & 0x0fff)) { 373 DPRINT_L2("All %u bytes of data have been read from input buffer\n", 374 s->data_count); 375 s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */ 376 s->data_count = 0; /* next buff read must start at position [0] */ 377 378 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 379 s->blkcnt--; 380 } 381 382 /* if that was the last block of data */ 383 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 384 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) || 385 /* stop at gap request */ 386 (s->stopped_state == sdhc_gap_read && 387 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) { 388 sdhci_end_transfer(s); 389 } else { /* if there are more data, read next block from card */ 390 sdhci_read_block_from_card(s); 391 } 392 break; 393 } 394 } 395 396 return value; 397 } 398 399 /* Write data from host controller FIFO to card */ 400 static void sdhci_write_block_to_card(SDHCIState *s) 401 { 402 int index = 0; 403 404 if (s->prnsts & SDHC_SPACE_AVAILABLE) { 405 if (s->norintstsen & SDHC_NISEN_WBUFRDY) { 406 s->norintsts |= SDHC_NIS_WBUFRDY; 407 } 408 sdhci_update_irq(s); 409 return; 410 } 411 412 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 413 if (s->blkcnt == 0) { 414 return; 415 } else { 416 s->blkcnt--; 417 } 418 } 419 420 for (index = 0; index < (s->blksize & 0x0fff); index++) { 421 sdbus_write_data(&s->sdbus, s->fifo_buffer[index]); 422 } 423 424 /* Next data can be written through BUFFER DATORT register */ 425 s->prnsts |= SDHC_SPACE_AVAILABLE; 426 427 /* Finish transfer if that was the last block of data */ 428 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 429 ((s->trnmod & SDHC_TRNS_MULTI) && 430 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) { 431 sdhci_end_transfer(s); 432 } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) { 433 s->norintsts |= SDHC_NIS_WBUFRDY; 434 } 435 436 /* Generate Block Gap Event if requested and if not the last block */ 437 if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) && 438 s->blkcnt > 0) { 439 s->prnsts &= ~SDHC_DOING_WRITE; 440 if (s->norintstsen & SDHC_EISEN_BLKGAP) { 441 s->norintsts |= SDHC_EIS_BLKGAP; 442 } 443 sdhci_end_transfer(s); 444 } 445 446 sdhci_update_irq(s); 447 } 448 449 /* Write @size bytes of @value data to host controller @s Buffer Data Port 450 * register */ 451 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size) 452 { 453 unsigned i; 454 455 /* Check that there is free space left in a buffer */ 456 if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) { 457 ERRPRINT("Can't write to data buffer: buffer full\n"); 458 return; 459 } 460 461 for (i = 0; i < size; i++) { 462 s->fifo_buffer[s->data_count] = value & 0xFF; 463 s->data_count++; 464 value >>= 8; 465 if (s->data_count >= (s->blksize & 0x0fff)) { 466 DPRINT_L2("write buffer filled with %u bytes of data\n", 467 s->data_count); 468 s->data_count = 0; 469 s->prnsts &= ~SDHC_SPACE_AVAILABLE; 470 if (s->prnsts & SDHC_DOING_WRITE) { 471 sdhci_write_block_to_card(s); 472 } 473 } 474 } 475 } 476 477 /* 478 * Single DMA data transfer 479 */ 480 481 /* Multi block SDMA transfer */ 482 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) 483 { 484 bool page_aligned = false; 485 unsigned int n, begin; 486 const uint16_t block_size = s->blksize & 0x0fff; 487 uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12); 488 uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk); 489 490 if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) { 491 qemu_log_mask(LOG_UNIMP, "infinite transfer is not supported\n"); 492 return; 493 } 494 495 /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for 496 * possible stop at page boundary if initial address is not page aligned, 497 * allow them to work properly */ 498 if ((s->sdmasysad % boundary_chk) == 0) { 499 page_aligned = true; 500 } 501 502 if (s->trnmod & SDHC_TRNS_READ) { 503 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | 504 SDHC_DAT_LINE_ACTIVE; 505 while (s->blkcnt) { 506 if (s->data_count == 0) { 507 for (n = 0; n < block_size; n++) { 508 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 509 } 510 } 511 begin = s->data_count; 512 if (((boundary_count + begin) < block_size) && page_aligned) { 513 s->data_count = boundary_count + begin; 514 boundary_count = 0; 515 } else { 516 s->data_count = block_size; 517 boundary_count -= block_size - begin; 518 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 519 s->blkcnt--; 520 } 521 } 522 dma_memory_write(&address_space_memory, s->sdmasysad, 523 &s->fifo_buffer[begin], s->data_count - begin); 524 s->sdmasysad += s->data_count - begin; 525 if (s->data_count == block_size) { 526 s->data_count = 0; 527 } 528 if (page_aligned && boundary_count == 0) { 529 break; 530 } 531 } 532 } else { 533 s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT | 534 SDHC_DAT_LINE_ACTIVE; 535 while (s->blkcnt) { 536 begin = s->data_count; 537 if (((boundary_count + begin) < block_size) && page_aligned) { 538 s->data_count = boundary_count + begin; 539 boundary_count = 0; 540 } else { 541 s->data_count = block_size; 542 boundary_count -= block_size - begin; 543 } 544 dma_memory_read(&address_space_memory, s->sdmasysad, 545 &s->fifo_buffer[begin], s->data_count - begin); 546 s->sdmasysad += s->data_count - begin; 547 if (s->data_count == block_size) { 548 for (n = 0; n < block_size; n++) { 549 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 550 } 551 s->data_count = 0; 552 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 553 s->blkcnt--; 554 } 555 } 556 if (page_aligned && boundary_count == 0) { 557 break; 558 } 559 } 560 } 561 562 if (s->blkcnt == 0) { 563 sdhci_end_transfer(s); 564 } else { 565 if (s->norintstsen & SDHC_NISEN_DMA) { 566 s->norintsts |= SDHC_NIS_DMA; 567 } 568 sdhci_update_irq(s); 569 } 570 } 571 572 /* single block SDMA transfer */ 573 static void sdhci_sdma_transfer_single_block(SDHCIState *s) 574 { 575 int n; 576 uint32_t datacnt = s->blksize & 0x0fff; 577 578 if (s->trnmod & SDHC_TRNS_READ) { 579 for (n = 0; n < datacnt; n++) { 580 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 581 } 582 dma_memory_write(&address_space_memory, s->sdmasysad, s->fifo_buffer, 583 datacnt); 584 } else { 585 dma_memory_read(&address_space_memory, s->sdmasysad, s->fifo_buffer, 586 datacnt); 587 for (n = 0; n < datacnt; n++) { 588 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 589 } 590 } 591 s->blkcnt--; 592 593 sdhci_end_transfer(s); 594 } 595 596 typedef struct ADMADescr { 597 hwaddr addr; 598 uint16_t length; 599 uint8_t attr; 600 uint8_t incr; 601 } ADMADescr; 602 603 static void get_adma_description(SDHCIState *s, ADMADescr *dscr) 604 { 605 uint32_t adma1 = 0; 606 uint64_t adma2 = 0; 607 hwaddr entry_addr = (hwaddr)s->admasysaddr; 608 switch (SDHC_DMA_TYPE(s->hostctl)) { 609 case SDHC_CTRL_ADMA2_32: 610 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma2, 611 sizeof(adma2)); 612 adma2 = le64_to_cpu(adma2); 613 /* The spec does not specify endianness of descriptor table. 614 * We currently assume that it is LE. 615 */ 616 dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull; 617 dscr->length = (uint16_t)extract64(adma2, 16, 16); 618 dscr->attr = (uint8_t)extract64(adma2, 0, 7); 619 dscr->incr = 8; 620 break; 621 case SDHC_CTRL_ADMA1_32: 622 dma_memory_read(&address_space_memory, entry_addr, (uint8_t *)&adma1, 623 sizeof(adma1)); 624 adma1 = le32_to_cpu(adma1); 625 dscr->addr = (hwaddr)(adma1 & 0xFFFFF000); 626 dscr->attr = (uint8_t)extract32(adma1, 0, 7); 627 dscr->incr = 4; 628 if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) { 629 dscr->length = (uint16_t)extract32(adma1, 12, 16); 630 } else { 631 dscr->length = 4096; 632 } 633 break; 634 case SDHC_CTRL_ADMA2_64: 635 dma_memory_read(&address_space_memory, entry_addr, 636 (uint8_t *)(&dscr->attr), 1); 637 dma_memory_read(&address_space_memory, entry_addr + 2, 638 (uint8_t *)(&dscr->length), 2); 639 dscr->length = le16_to_cpu(dscr->length); 640 dma_memory_read(&address_space_memory, entry_addr + 4, 641 (uint8_t *)(&dscr->addr), 8); 642 dscr->attr = le64_to_cpu(dscr->attr); 643 dscr->attr &= 0xfffffff8; 644 dscr->incr = 12; 645 break; 646 } 647 } 648 649 /* Advanced DMA data transfer */ 650 651 static void sdhci_do_adma(SDHCIState *s) 652 { 653 unsigned int n, begin, length; 654 const uint16_t block_size = s->blksize & 0x0fff; 655 ADMADescr dscr; 656 int i; 657 658 for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) { 659 s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH; 660 661 get_adma_description(s, &dscr); 662 DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n", 663 dscr.addr, dscr.length, dscr.attr); 664 665 if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) { 666 /* Indicate that error occurred in ST_FDS state */ 667 s->admaerr &= ~SDHC_ADMAERR_STATE_MASK; 668 s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS; 669 670 /* Generate ADMA error interrupt */ 671 if (s->errintstsen & SDHC_EISEN_ADMAERR) { 672 s->errintsts |= SDHC_EIS_ADMAERR; 673 s->norintsts |= SDHC_NIS_ERR; 674 } 675 676 sdhci_update_irq(s); 677 return; 678 } 679 680 length = dscr.length ? dscr.length : 65536; 681 682 switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) { 683 case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */ 684 685 if (s->trnmod & SDHC_TRNS_READ) { 686 while (length) { 687 if (s->data_count == 0) { 688 for (n = 0; n < block_size; n++) { 689 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 690 } 691 } 692 begin = s->data_count; 693 if ((length + begin) < block_size) { 694 s->data_count = length + begin; 695 length = 0; 696 } else { 697 s->data_count = block_size; 698 length -= block_size - begin; 699 } 700 dma_memory_write(&address_space_memory, dscr.addr, 701 &s->fifo_buffer[begin], 702 s->data_count - begin); 703 dscr.addr += s->data_count - begin; 704 if (s->data_count == block_size) { 705 s->data_count = 0; 706 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 707 s->blkcnt--; 708 if (s->blkcnt == 0) { 709 break; 710 } 711 } 712 } 713 } 714 } else { 715 while (length) { 716 begin = s->data_count; 717 if ((length + begin) < block_size) { 718 s->data_count = length + begin; 719 length = 0; 720 } else { 721 s->data_count = block_size; 722 length -= block_size - begin; 723 } 724 dma_memory_read(&address_space_memory, dscr.addr, 725 &s->fifo_buffer[begin], 726 s->data_count - begin); 727 dscr.addr += s->data_count - begin; 728 if (s->data_count == block_size) { 729 for (n = 0; n < block_size; n++) { 730 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 731 } 732 s->data_count = 0; 733 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 734 s->blkcnt--; 735 if (s->blkcnt == 0) { 736 break; 737 } 738 } 739 } 740 } 741 } 742 s->admasysaddr += dscr.incr; 743 break; 744 case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */ 745 s->admasysaddr = dscr.addr; 746 DPRINT_L1("ADMA link: admasysaddr=0x%" PRIx64 "\n", 747 s->admasysaddr); 748 break; 749 default: 750 s->admasysaddr += dscr.incr; 751 break; 752 } 753 754 if (dscr.attr & SDHC_ADMA_ATTR_INT) { 755 DPRINT_L1("ADMA interrupt: admasysaddr=0x%" PRIx64 "\n", 756 s->admasysaddr); 757 if (s->norintstsen & SDHC_NISEN_DMA) { 758 s->norintsts |= SDHC_NIS_DMA; 759 } 760 761 sdhci_update_irq(s); 762 } 763 764 /* ADMA transfer terminates if blkcnt == 0 or by END attribute */ 765 if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && 766 (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) { 767 DPRINT_L2("ADMA transfer completed\n"); 768 if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) && 769 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && 770 s->blkcnt != 0)) { 771 ERRPRINT("SD/MMC host ADMA length mismatch\n"); 772 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH | 773 SDHC_ADMAERR_STATE_ST_TFR; 774 if (s->errintstsen & SDHC_EISEN_ADMAERR) { 775 ERRPRINT("Set ADMA error flag\n"); 776 s->errintsts |= SDHC_EIS_ADMAERR; 777 s->norintsts |= SDHC_NIS_ERR; 778 } 779 780 sdhci_update_irq(s); 781 } 782 sdhci_end_transfer(s); 783 return; 784 } 785 786 } 787 788 /* we have unfinished business - reschedule to continue ADMA */ 789 timer_mod(s->transfer_timer, 790 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY); 791 } 792 793 /* Perform data transfer according to controller configuration */ 794 795 static void sdhci_data_transfer(void *opaque) 796 { 797 SDHCIState *s = (SDHCIState *)opaque; 798 799 if (s->trnmod & SDHC_TRNS_DMA) { 800 switch (SDHC_DMA_TYPE(s->hostctl)) { 801 case SDHC_CTRL_SDMA: 802 if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) { 803 sdhci_sdma_transfer_single_block(s); 804 } else { 805 sdhci_sdma_transfer_multi_blocks(s); 806 } 807 808 break; 809 case SDHC_CTRL_ADMA1_32: 810 if (!(s->capareg & SDHC_CAN_DO_ADMA1)) { 811 ERRPRINT("ADMA1 not supported\n"); 812 break; 813 } 814 815 sdhci_do_adma(s); 816 break; 817 case SDHC_CTRL_ADMA2_32: 818 if (!(s->capareg & SDHC_CAN_DO_ADMA2)) { 819 ERRPRINT("ADMA2 not supported\n"); 820 break; 821 } 822 823 sdhci_do_adma(s); 824 break; 825 case SDHC_CTRL_ADMA2_64: 826 if (!(s->capareg & SDHC_CAN_DO_ADMA2) || 827 !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) { 828 ERRPRINT("64 bit ADMA not supported\n"); 829 break; 830 } 831 832 sdhci_do_adma(s); 833 break; 834 default: 835 ERRPRINT("Unsupported DMA type\n"); 836 break; 837 } 838 } else { 839 if ((s->trnmod & SDHC_TRNS_READ) && sdbus_data_ready(&s->sdbus)) { 840 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | 841 SDHC_DAT_LINE_ACTIVE; 842 sdhci_read_block_from_card(s); 843 } else { 844 s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE | 845 SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT; 846 sdhci_write_block_to_card(s); 847 } 848 } 849 } 850 851 static bool sdhci_can_issue_command(SDHCIState *s) 852 { 853 if (!SDHC_CLOCK_IS_ON(s->clkcon) || 854 (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) && 855 ((s->cmdreg & SDHC_CMD_DATA_PRESENT) || 856 ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY && 857 !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) { 858 return false; 859 } 860 861 return true; 862 } 863 864 /* The Buffer Data Port register must be accessed in sequential and 865 * continuous manner */ 866 static inline bool 867 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num) 868 { 869 if ((s->data_count & 0x3) != byte_num) { 870 ERRPRINT("Non-sequential access to Buffer Data Port register" 871 "is prohibited\n"); 872 return false; 873 } 874 return true; 875 } 876 877 static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size) 878 { 879 SDHCIState *s = (SDHCIState *)opaque; 880 uint32_t ret = 0; 881 882 switch (offset & ~0x3) { 883 case SDHC_SYSAD: 884 ret = s->sdmasysad; 885 break; 886 case SDHC_BLKSIZE: 887 ret = s->blksize | (s->blkcnt << 16); 888 break; 889 case SDHC_ARGUMENT: 890 ret = s->argument; 891 break; 892 case SDHC_TRNMOD: 893 ret = s->trnmod | (s->cmdreg << 16); 894 break; 895 case SDHC_RSPREG0 ... SDHC_RSPREG3: 896 ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2]; 897 break; 898 case SDHC_BDATA: 899 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { 900 ret = sdhci_read_dataport(s, size); 901 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, 902 ret, ret); 903 return ret; 904 } 905 break; 906 case SDHC_PRNSTS: 907 ret = s->prnsts; 908 break; 909 case SDHC_HOSTCTL: 910 ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) | 911 (s->wakcon << 24); 912 break; 913 case SDHC_CLKCON: 914 ret = s->clkcon | (s->timeoutcon << 16); 915 break; 916 case SDHC_NORINTSTS: 917 ret = s->norintsts | (s->errintsts << 16); 918 break; 919 case SDHC_NORINTSTSEN: 920 ret = s->norintstsen | (s->errintstsen << 16); 921 break; 922 case SDHC_NORINTSIGEN: 923 ret = s->norintsigen | (s->errintsigen << 16); 924 break; 925 case SDHC_ACMD12ERRSTS: 926 ret = s->acmd12errsts; 927 break; 928 case SDHC_CAPAREG: 929 ret = s->capareg; 930 break; 931 case SDHC_MAXCURR: 932 ret = s->maxcurr; 933 break; 934 case SDHC_ADMAERR: 935 ret = s->admaerr; 936 break; 937 case SDHC_ADMASYSADDR: 938 ret = (uint32_t)s->admasysaddr; 939 break; 940 case SDHC_ADMASYSADDR + 4: 941 ret = (uint32_t)(s->admasysaddr >> 32); 942 break; 943 case SDHC_SLOT_INT_STATUS: 944 ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s); 945 break; 946 default: 947 ERRPRINT("bad %ub read: addr[0x%04x]\n", size, (int)offset); 948 break; 949 } 950 951 ret >>= (offset & 0x3) * 8; 952 ret &= (1ULL << (size * 8)) - 1; 953 DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, (int)offset, ret, ret); 954 return ret; 955 } 956 957 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value) 958 { 959 if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) { 960 return; 961 } 962 s->blkgap = value & SDHC_STOP_AT_GAP_REQ; 963 964 if ((value & SDHC_CONTINUE_REQ) && s->stopped_state && 965 (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) { 966 if (s->stopped_state == sdhc_gap_read) { 967 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ; 968 sdhci_read_block_from_card(s); 969 } else { 970 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE; 971 sdhci_write_block_to_card(s); 972 } 973 s->stopped_state = sdhc_not_stopped; 974 } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) { 975 if (s->prnsts & SDHC_DOING_READ) { 976 s->stopped_state = sdhc_gap_read; 977 } else if (s->prnsts & SDHC_DOING_WRITE) { 978 s->stopped_state = sdhc_gap_write; 979 } 980 } 981 } 982 983 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value) 984 { 985 switch (value) { 986 case SDHC_RESET_ALL: 987 sdhci_reset(s); 988 break; 989 case SDHC_RESET_CMD: 990 s->prnsts &= ~SDHC_CMD_INHIBIT; 991 s->norintsts &= ~SDHC_NIS_CMDCMP; 992 break; 993 case SDHC_RESET_DATA: 994 s->data_count = 0; 995 s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE | 996 SDHC_DOING_READ | SDHC_DOING_WRITE | 997 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE); 998 s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ); 999 s->stopped_state = sdhc_not_stopped; 1000 s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY | 1001 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP); 1002 break; 1003 } 1004 } 1005 1006 static void 1007 sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) 1008 { 1009 SDHCIState *s = (SDHCIState *)opaque; 1010 unsigned shift = 8 * (offset & 0x3); 1011 uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift); 1012 uint32_t value = val; 1013 value <<= shift; 1014 1015 switch (offset & ~0x3) { 1016 case SDHC_SYSAD: 1017 s->sdmasysad = (s->sdmasysad & mask) | value; 1018 MASKED_WRITE(s->sdmasysad, mask, value); 1019 /* Writing to last byte of sdmasysad might trigger transfer */ 1020 if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt && 1021 s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) { 1022 if (s->trnmod & SDHC_TRNS_MULTI) { 1023 sdhci_sdma_transfer_multi_blocks(s); 1024 } else { 1025 sdhci_sdma_transfer_single_block(s); 1026 } 1027 } 1028 break; 1029 case SDHC_BLKSIZE: 1030 if (!TRANSFERRING_DATA(s->prnsts)) { 1031 MASKED_WRITE(s->blksize, mask, value); 1032 MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16); 1033 } 1034 1035 /* Limit block size to the maximum buffer size */ 1036 if (extract32(s->blksize, 0, 12) > s->buf_maxsz) { 1037 qemu_log_mask(LOG_GUEST_ERROR, "%s: Size 0x%x is larger than " \ 1038 "the maximum buffer 0x%x", __func__, s->blksize, 1039 s->buf_maxsz); 1040 1041 s->blksize = deposit32(s->blksize, 0, 12, s->buf_maxsz); 1042 } 1043 1044 break; 1045 case SDHC_ARGUMENT: 1046 MASKED_WRITE(s->argument, mask, value); 1047 break; 1048 case SDHC_TRNMOD: 1049 /* DMA can be enabled only if it is supported as indicated by 1050 * capabilities register */ 1051 if (!(s->capareg & SDHC_CAN_DO_DMA)) { 1052 value &= ~SDHC_TRNS_DMA; 1053 } 1054 MASKED_WRITE(s->trnmod, mask, value & MASK_TRNMOD); 1055 MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16); 1056 1057 /* Writing to the upper byte of CMDREG triggers SD command generation */ 1058 if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) { 1059 break; 1060 } 1061 1062 sdhci_send_command(s); 1063 break; 1064 case SDHC_BDATA: 1065 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { 1066 sdhci_write_dataport(s, value >> shift, size); 1067 } 1068 break; 1069 case SDHC_HOSTCTL: 1070 if (!(mask & 0xFF0000)) { 1071 sdhci_blkgap_write(s, value >> 16); 1072 } 1073 MASKED_WRITE(s->hostctl, mask, value); 1074 MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8); 1075 MASKED_WRITE(s->wakcon, mask >> 24, value >> 24); 1076 if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 || 1077 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) { 1078 s->pwrcon &= ~SDHC_POWER_ON; 1079 } 1080 break; 1081 case SDHC_CLKCON: 1082 if (!(mask & 0xFF000000)) { 1083 sdhci_reset_write(s, value >> 24); 1084 } 1085 MASKED_WRITE(s->clkcon, mask, value); 1086 MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16); 1087 if (s->clkcon & SDHC_CLOCK_INT_EN) { 1088 s->clkcon |= SDHC_CLOCK_INT_STABLE; 1089 } else { 1090 s->clkcon &= ~SDHC_CLOCK_INT_STABLE; 1091 } 1092 break; 1093 case SDHC_NORINTSTS: 1094 if (s->norintstsen & SDHC_NISEN_CARDINT) { 1095 value &= ~SDHC_NIS_CARDINT; 1096 } 1097 s->norintsts &= mask | ~value; 1098 s->errintsts &= (mask >> 16) | ~(value >> 16); 1099 if (s->errintsts) { 1100 s->norintsts |= SDHC_NIS_ERR; 1101 } else { 1102 s->norintsts &= ~SDHC_NIS_ERR; 1103 } 1104 sdhci_update_irq(s); 1105 break; 1106 case SDHC_NORINTSTSEN: 1107 MASKED_WRITE(s->norintstsen, mask, value); 1108 MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16); 1109 s->norintsts &= s->norintstsen; 1110 s->errintsts &= s->errintstsen; 1111 if (s->errintsts) { 1112 s->norintsts |= SDHC_NIS_ERR; 1113 } else { 1114 s->norintsts &= ~SDHC_NIS_ERR; 1115 } 1116 /* Quirk for Raspberry Pi: pending card insert interrupt 1117 * appears when first enabled after power on */ 1118 if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) { 1119 assert(s->pending_insert_quirk); 1120 s->norintsts |= SDHC_NIS_INSERT; 1121 s->pending_insert_state = false; 1122 } 1123 sdhci_update_irq(s); 1124 break; 1125 case SDHC_NORINTSIGEN: 1126 MASKED_WRITE(s->norintsigen, mask, value); 1127 MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16); 1128 sdhci_update_irq(s); 1129 break; 1130 case SDHC_ADMAERR: 1131 MASKED_WRITE(s->admaerr, mask, value); 1132 break; 1133 case SDHC_ADMASYSADDR: 1134 s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL | 1135 (uint64_t)mask)) | (uint64_t)value; 1136 break; 1137 case SDHC_ADMASYSADDR + 4: 1138 s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL | 1139 ((uint64_t)mask << 32))) | ((uint64_t)value << 32); 1140 break; 1141 case SDHC_FEAER: 1142 s->acmd12errsts |= value; 1143 s->errintsts |= (value >> 16) & s->errintstsen; 1144 if (s->acmd12errsts) { 1145 s->errintsts |= SDHC_EIS_CMD12ERR; 1146 } 1147 if (s->errintsts) { 1148 s->norintsts |= SDHC_NIS_ERR; 1149 } 1150 sdhci_update_irq(s); 1151 break; 1152 default: 1153 ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n", 1154 size, (int)offset, value >> shift, value >> shift); 1155 break; 1156 } 1157 DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n", 1158 size, (int)offset, value >> shift, value >> shift); 1159 } 1160 1161 static const MemoryRegionOps sdhci_mmio_ops = { 1162 .read = sdhci_read, 1163 .write = sdhci_write, 1164 .valid = { 1165 .min_access_size = 1, 1166 .max_access_size = 4, 1167 .unaligned = false 1168 }, 1169 .endianness = DEVICE_LITTLE_ENDIAN, 1170 }; 1171 1172 static inline unsigned int sdhci_get_fifolen(SDHCIState *s) 1173 { 1174 switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) { 1175 case 0: 1176 return 512; 1177 case 1: 1178 return 1024; 1179 case 2: 1180 return 2048; 1181 default: 1182 hw_error("SDHC: unsupported value for maximum block size\n"); 1183 return 0; 1184 } 1185 } 1186 1187 static void sdhci_initfn(SDHCIState *s) 1188 { 1189 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), 1190 TYPE_SDHCI_BUS, DEVICE(s), "sd-bus"); 1191 1192 s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); 1193 s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s); 1194 } 1195 1196 static void sdhci_uninitfn(SDHCIState *s) 1197 { 1198 timer_del(s->insert_timer); 1199 timer_free(s->insert_timer); 1200 timer_del(s->transfer_timer); 1201 timer_free(s->transfer_timer); 1202 qemu_free_irq(s->eject_cb); 1203 qemu_free_irq(s->ro_cb); 1204 1205 g_free(s->fifo_buffer); 1206 s->fifo_buffer = NULL; 1207 } 1208 1209 static bool sdhci_pending_insert_vmstate_needed(void *opaque) 1210 { 1211 SDHCIState *s = opaque; 1212 1213 return s->pending_insert_state; 1214 } 1215 1216 static const VMStateDescription sdhci_pending_insert_vmstate = { 1217 .name = "sdhci/pending-insert", 1218 .version_id = 1, 1219 .minimum_version_id = 1, 1220 .needed = sdhci_pending_insert_vmstate_needed, 1221 .fields = (VMStateField[]) { 1222 VMSTATE_BOOL(pending_insert_state, SDHCIState), 1223 VMSTATE_END_OF_LIST() 1224 }, 1225 }; 1226 1227 const VMStateDescription sdhci_vmstate = { 1228 .name = "sdhci", 1229 .version_id = 1, 1230 .minimum_version_id = 1, 1231 .fields = (VMStateField[]) { 1232 VMSTATE_UINT32(sdmasysad, SDHCIState), 1233 VMSTATE_UINT16(blksize, SDHCIState), 1234 VMSTATE_UINT16(blkcnt, SDHCIState), 1235 VMSTATE_UINT32(argument, SDHCIState), 1236 VMSTATE_UINT16(trnmod, SDHCIState), 1237 VMSTATE_UINT16(cmdreg, SDHCIState), 1238 VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4), 1239 VMSTATE_UINT32(prnsts, SDHCIState), 1240 VMSTATE_UINT8(hostctl, SDHCIState), 1241 VMSTATE_UINT8(pwrcon, SDHCIState), 1242 VMSTATE_UINT8(blkgap, SDHCIState), 1243 VMSTATE_UINT8(wakcon, SDHCIState), 1244 VMSTATE_UINT16(clkcon, SDHCIState), 1245 VMSTATE_UINT8(timeoutcon, SDHCIState), 1246 VMSTATE_UINT8(admaerr, SDHCIState), 1247 VMSTATE_UINT16(norintsts, SDHCIState), 1248 VMSTATE_UINT16(errintsts, SDHCIState), 1249 VMSTATE_UINT16(norintstsen, SDHCIState), 1250 VMSTATE_UINT16(errintstsen, SDHCIState), 1251 VMSTATE_UINT16(norintsigen, SDHCIState), 1252 VMSTATE_UINT16(errintsigen, SDHCIState), 1253 VMSTATE_UINT16(acmd12errsts, SDHCIState), 1254 VMSTATE_UINT16(data_count, SDHCIState), 1255 VMSTATE_UINT64(admasysaddr, SDHCIState), 1256 VMSTATE_UINT8(stopped_state, SDHCIState), 1257 VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, buf_maxsz), 1258 VMSTATE_TIMER_PTR(insert_timer, SDHCIState), 1259 VMSTATE_TIMER_PTR(transfer_timer, SDHCIState), 1260 VMSTATE_END_OF_LIST() 1261 }, 1262 .subsections = (const VMStateDescription*[]) { 1263 &sdhci_pending_insert_vmstate, 1264 NULL 1265 }, 1266 }; 1267 1268 /* Capabilities registers provide information on supported features of this 1269 * specific host controller implementation */ 1270 static Property sdhci_pci_properties[] = { 1271 DEFINE_PROP_UINT32("capareg", SDHCIState, capareg, 1272 SDHC_CAPAB_REG_DEFAULT), 1273 DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0), 1274 DEFINE_PROP_END_OF_LIST(), 1275 }; 1276 1277 static void sdhci_pci_realize(PCIDevice *dev, Error **errp) 1278 { 1279 SDHCIState *s = PCI_SDHCI(dev); 1280 dev->config[PCI_CLASS_PROG] = 0x01; /* Standard Host supported DMA */ 1281 dev->config[PCI_INTERRUPT_PIN] = 0x01; /* interrupt pin A */ 1282 sdhci_initfn(s); 1283 s->buf_maxsz = sdhci_get_fifolen(s); 1284 s->fifo_buffer = g_malloc0(s->buf_maxsz); 1285 s->irq = pci_allocate_irq(dev); 1286 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", 1287 SDHC_REGISTERS_MAP_SIZE); 1288 pci_register_bar(dev, 0, 0, &s->iomem); 1289 } 1290 1291 static void sdhci_pci_exit(PCIDevice *dev) 1292 { 1293 SDHCIState *s = PCI_SDHCI(dev); 1294 sdhci_uninitfn(s); 1295 } 1296 1297 static void sdhci_pci_class_init(ObjectClass *klass, void *data) 1298 { 1299 DeviceClass *dc = DEVICE_CLASS(klass); 1300 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 1301 1302 k->realize = sdhci_pci_realize; 1303 k->exit = sdhci_pci_exit; 1304 k->vendor_id = PCI_VENDOR_ID_REDHAT; 1305 k->device_id = PCI_DEVICE_ID_REDHAT_SDHCI; 1306 k->class_id = PCI_CLASS_SYSTEM_SDHCI; 1307 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 1308 dc->vmsd = &sdhci_vmstate; 1309 dc->props = sdhci_pci_properties; 1310 dc->reset = sdhci_poweron_reset; 1311 } 1312 1313 static const TypeInfo sdhci_pci_info = { 1314 .name = TYPE_PCI_SDHCI, 1315 .parent = TYPE_PCI_DEVICE, 1316 .instance_size = sizeof(SDHCIState), 1317 .class_init = sdhci_pci_class_init, 1318 .interfaces = (InterfaceInfo[]) { 1319 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 1320 { }, 1321 }, 1322 }; 1323 1324 static Property sdhci_sysbus_properties[] = { 1325 DEFINE_PROP_UINT32("capareg", SDHCIState, capareg, 1326 SDHC_CAPAB_REG_DEFAULT), 1327 DEFINE_PROP_UINT32("maxcurr", SDHCIState, maxcurr, 0), 1328 DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk, 1329 false), 1330 DEFINE_PROP_END_OF_LIST(), 1331 }; 1332 1333 static void sdhci_sysbus_init(Object *obj) 1334 { 1335 SDHCIState *s = SYSBUS_SDHCI(obj); 1336 1337 sdhci_initfn(s); 1338 } 1339 1340 static void sdhci_sysbus_finalize(Object *obj) 1341 { 1342 SDHCIState *s = SYSBUS_SDHCI(obj); 1343 sdhci_uninitfn(s); 1344 } 1345 1346 static void sdhci_sysbus_realize(DeviceState *dev, Error ** errp) 1347 { 1348 SDHCIState *s = SYSBUS_SDHCI(dev); 1349 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1350 1351 s->buf_maxsz = sdhci_get_fifolen(s); 1352 s->fifo_buffer = g_malloc0(s->buf_maxsz); 1353 sysbus_init_irq(sbd, &s->irq); 1354 memory_region_init_io(&s->iomem, OBJECT(s), &sdhci_mmio_ops, s, "sdhci", 1355 SDHC_REGISTERS_MAP_SIZE); 1356 sysbus_init_mmio(sbd, &s->iomem); 1357 } 1358 1359 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data) 1360 { 1361 DeviceClass *dc = DEVICE_CLASS(klass); 1362 1363 dc->vmsd = &sdhci_vmstate; 1364 dc->props = sdhci_sysbus_properties; 1365 dc->realize = sdhci_sysbus_realize; 1366 dc->reset = sdhci_poweron_reset; 1367 } 1368 1369 static const TypeInfo sdhci_sysbus_info = { 1370 .name = TYPE_SYSBUS_SDHCI, 1371 .parent = TYPE_SYS_BUS_DEVICE, 1372 .instance_size = sizeof(SDHCIState), 1373 .instance_init = sdhci_sysbus_init, 1374 .instance_finalize = sdhci_sysbus_finalize, 1375 .class_init = sdhci_sysbus_class_init, 1376 }; 1377 1378 static void sdhci_bus_class_init(ObjectClass *klass, void *data) 1379 { 1380 SDBusClass *sbc = SD_BUS_CLASS(klass); 1381 1382 sbc->set_inserted = sdhci_set_inserted; 1383 sbc->set_readonly = sdhci_set_readonly; 1384 } 1385 1386 static const TypeInfo sdhci_bus_info = { 1387 .name = TYPE_SDHCI_BUS, 1388 .parent = TYPE_SD_BUS, 1389 .instance_size = sizeof(SDBus), 1390 .class_init = sdhci_bus_class_init, 1391 }; 1392 1393 static void sdhci_register_types(void) 1394 { 1395 type_register_static(&sdhci_pci_info); 1396 type_register_static(&sdhci_sysbus_info); 1397 type_register_static(&sdhci_bus_info); 1398 } 1399 1400 type_init(sdhci_register_types) 1401