xref: /openbmc/qemu/hw/sd/sdhci.c (revision 88f62c2b)
1 /*
2  * SD Association Host Standard Specification v2.0 controller emulation
3  *
4  * Copyright (c) 2011 Samsung Electronics Co., Ltd.
5  * Mitsyanko Igor <i.mitsyanko@samsung.com>
6  * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com>
7  *
8  * Based on MMC controller for Samsung S5PC1xx-based board emulation
9  * by Alexey Merkulov and Vladimir Monakhov.
10  *
11  * This program is free software; you can redistribute it and/or modify it
12  * under the terms of the GNU General Public License as published by the
13  * Free Software Foundation; either version 2 of the License, or (at your
14  * option) any later version.
15  *
16  * This program is distributed in the hope that it will be useful,
17  * but WITHOUT ANY WARRANTY; without even the implied warranty of
18  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
19  * See the GNU General Public License for more details.
20  *
21  * You should have received a copy of the GNU General Public License along
22  * with this program; if not, see <http://www.gnu.org/licenses/>.
23  */
24 
25 #include "hw/hw.h"
26 #include "sysemu/blockdev.h"
27 #include "sysemu/dma.h"
28 #include "qemu/timer.h"
29 #include "block/block_int.h"
30 #include "qemu/bitops.h"
31 
32 #include "sdhci.h"
33 
34 /* host controller debug messages */
35 #ifndef SDHC_DEBUG
36 #define SDHC_DEBUG                        0
37 #endif
38 
39 #if SDHC_DEBUG == 0
40     #define DPRINT_L1(fmt, args...)       do { } while (0)
41     #define DPRINT_L2(fmt, args...)       do { } while (0)
42     #define ERRPRINT(fmt, args...)        do { } while (0)
43 #elif SDHC_DEBUG == 1
44     #define DPRINT_L1(fmt, args...)       \
45         do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
46     #define DPRINT_L2(fmt, args...)       do { } while (0)
47     #define ERRPRINT(fmt, args...)        \
48         do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0)
49 #else
50     #define DPRINT_L1(fmt, args...)       \
51         do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
52     #define DPRINT_L2(fmt, args...)       \
53         do {fprintf(stderr, "QEMU SDHC: "fmt, ## args); } while (0)
54     #define ERRPRINT(fmt, args...)        \
55         do {fprintf(stderr, "QEMU SDHC ERROR: "fmt, ## args); } while (0)
56 #endif
57 
58 /* Default SD/MMC host controller features information, which will be
59  * presented in CAPABILITIES register of generic SD host controller at reset.
60  * If not stated otherwise:
61  * 0 - not supported, 1 - supported, other - prohibited.
62  */
63 #define SDHC_CAPAB_64BITBUS       0ul        /* 64-bit System Bus Support */
64 #define SDHC_CAPAB_18V            1ul        /* Voltage support 1.8v */
65 #define SDHC_CAPAB_30V            0ul        /* Voltage support 3.0v */
66 #define SDHC_CAPAB_33V            1ul        /* Voltage support 3.3v */
67 #define SDHC_CAPAB_SUSPRESUME     0ul        /* Suspend/resume support */
68 #define SDHC_CAPAB_SDMA           1ul        /* SDMA support */
69 #define SDHC_CAPAB_HIGHSPEED      1ul        /* High speed support */
70 #define SDHC_CAPAB_ADMA1          1ul        /* ADMA1 support */
71 #define SDHC_CAPAB_ADMA2          1ul        /* ADMA2 support */
72 /* Maximum host controller R/W buffers size
73  * Possible values: 512, 1024, 2048 bytes */
74 #define SDHC_CAPAB_MAXBLOCKLENGTH 512ul
75 /* Maximum clock frequency for SDclock in MHz
76  * value in range 10-63 MHz, 0 - not defined */
77 #define SDHC_CAPAB_BASECLKFREQ    0ul
78 #define SDHC_CAPAB_TOUNIT         1ul  /* Timeout clock unit 0 - kHz, 1 - MHz */
79 /* Timeout clock frequency 1-63, 0 - not defined */
80 #define SDHC_CAPAB_TOCLKFREQ      0ul
81 
82 /* Now check all parameters and calculate CAPABILITIES REGISTER value */
83 #if SDHC_CAPAB_64BITBUS > 1 || SDHC_CAPAB_18V > 1 || SDHC_CAPAB_30V > 1 ||     \
84     SDHC_CAPAB_33V > 1 || SDHC_CAPAB_SUSPRESUME > 1 || SDHC_CAPAB_SDMA > 1 ||  \
85     SDHC_CAPAB_HIGHSPEED > 1 || SDHC_CAPAB_ADMA2 > 1 || SDHC_CAPAB_ADMA1 > 1 ||\
86     SDHC_CAPAB_TOUNIT > 1
87 #error Capabilities features can have value 0 or 1 only!
88 #endif
89 
90 #if SDHC_CAPAB_MAXBLOCKLENGTH == 512
91 #define MAX_BLOCK_LENGTH 0ul
92 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 1024
93 #define MAX_BLOCK_LENGTH 1ul
94 #elif SDHC_CAPAB_MAXBLOCKLENGTH == 2048
95 #define MAX_BLOCK_LENGTH 2ul
96 #else
97 #error Max host controller block size can have value 512, 1024 or 2048 only!
98 #endif
99 
100 #if (SDHC_CAPAB_BASECLKFREQ > 0 && SDHC_CAPAB_BASECLKFREQ < 10) || \
101     SDHC_CAPAB_BASECLKFREQ > 63
102 #error SDclock frequency can have value in range 0, 10-63 only!
103 #endif
104 
105 #if SDHC_CAPAB_TOCLKFREQ > 63
106 #error Timeout clock frequency can have value in range 0-63 only!
107 #endif
108 
109 #define SDHC_CAPAB_REG_DEFAULT                                 \
110    ((SDHC_CAPAB_64BITBUS << 28) | (SDHC_CAPAB_18V << 26) |     \
111     (SDHC_CAPAB_30V << 25) | (SDHC_CAPAB_33V << 24) |          \
112     (SDHC_CAPAB_SUSPRESUME << 23) | (SDHC_CAPAB_SDMA << 22) |  \
113     (SDHC_CAPAB_HIGHSPEED << 21) | (SDHC_CAPAB_ADMA1 << 20) |  \
114     (SDHC_CAPAB_ADMA2 << 19) | (MAX_BLOCK_LENGTH << 16) |      \
115     (SDHC_CAPAB_BASECLKFREQ << 8) | (SDHC_CAPAB_TOUNIT << 7) | \
116     (SDHC_CAPAB_TOCLKFREQ))
117 
118 #define MASKED_WRITE(reg, mask, val)  (reg = (reg & (mask)) | (val))
119 
120 static uint8_t sdhci_slotint(SDHCIState *s)
121 {
122     return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) ||
123          ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) ||
124          ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV));
125 }
126 
127 static inline void sdhci_update_irq(SDHCIState *s)
128 {
129     qemu_set_irq(s->irq, sdhci_slotint(s));
130 }
131 
132 static void sdhci_raise_insertion_irq(void *opaque)
133 {
134     SDHCIState *s = (SDHCIState *)opaque;
135 
136     if (s->norintsts & SDHC_NIS_REMOVE) {
137         qemu_mod_timer(s->insert_timer,
138                        qemu_get_clock_ns(vm_clock) + SDHC_INSERTION_DELAY);
139     } else {
140         s->prnsts = 0x1ff0000;
141         if (s->norintstsen & SDHC_NISEN_INSERT) {
142             s->norintsts |= SDHC_NIS_INSERT;
143         }
144         sdhci_update_irq(s);
145     }
146 }
147 
148 static void sdhci_insert_eject_cb(void *opaque, int irq, int level)
149 {
150     SDHCIState *s = (SDHCIState *)opaque;
151     DPRINT_L1("Card state changed: %s!\n", level ? "insert" : "eject");
152 
153     if ((s->norintsts & SDHC_NIS_REMOVE) && level) {
154         /* Give target some time to notice card ejection */
155         qemu_mod_timer(s->insert_timer,
156                        qemu_get_clock_ns(vm_clock) + SDHC_INSERTION_DELAY);
157     } else {
158         if (level) {
159             s->prnsts = 0x1ff0000;
160             if (s->norintstsen & SDHC_NISEN_INSERT) {
161                 s->norintsts |= SDHC_NIS_INSERT;
162             }
163         } else {
164             s->prnsts = 0x1fa0000;
165             s->pwrcon &= ~SDHC_POWER_ON;
166             s->clkcon &= ~SDHC_CLOCK_SDCLK_EN;
167             if (s->norintstsen & SDHC_NISEN_REMOVE) {
168                 s->norintsts |= SDHC_NIS_REMOVE;
169             }
170         }
171         sdhci_update_irq(s);
172     }
173 }
174 
175 static void sdhci_card_readonly_cb(void *opaque, int irq, int level)
176 {
177     SDHCIState *s = (SDHCIState *)opaque;
178 
179     if (level) {
180         s->prnsts &= ~SDHC_WRITE_PROTECT;
181     } else {
182         /* Write enabled */
183         s->prnsts |= SDHC_WRITE_PROTECT;
184     }
185 }
186 
187 static void sdhci_reset(SDHCIState *s)
188 {
189     qemu_del_timer(s->insert_timer);
190     qemu_del_timer(s->transfer_timer);
191     /* Set all registers to 0. Capabilities registers are not cleared
192      * and assumed to always preserve their value, given to them during
193      * initialization */
194     memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad);
195 
196     sd_set_cb(s->card, s->ro_cb, s->eject_cb);
197     s->data_count = 0;
198     s->stopped_state = sdhc_not_stopped;
199 }
200 
201 static void sdhci_do_data_transfer(void *opaque)
202 {
203     SDHCIState *s = (SDHCIState *)opaque;
204 
205     SDHCI_GET_CLASS(s)->data_transfer(s);
206 }
207 
208 static void sdhci_send_command(SDHCIState *s)
209 {
210     SDRequest request;
211     uint8_t response[16];
212     int rlen;
213 
214     s->errintsts = 0;
215     s->acmd12errsts = 0;
216     request.cmd = s->cmdreg >> 8;
217     request.arg = s->argument;
218     DPRINT_L1("sending CMD%u ARG[0x%08x]\n", request.cmd, request.arg);
219     rlen = sd_do_command(s->card, &request, response);
220 
221     if (s->cmdreg & SDHC_CMD_RESPONSE) {
222         if (rlen == 4) {
223             s->rspreg[0] = (response[0] << 24) | (response[1] << 16) |
224                            (response[2] << 8)  |  response[3];
225             s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0;
226             DPRINT_L1("Response: RSPREG[31..0]=0x%08x\n", s->rspreg[0]);
227         } else if (rlen == 16) {
228             s->rspreg[0] = (response[11] << 24) | (response[12] << 16) |
229                            (response[13] << 8) |  response[14];
230             s->rspreg[1] = (response[7] << 24) | (response[8] << 16) |
231                            (response[9] << 8)  |  response[10];
232             s->rspreg[2] = (response[3] << 24) | (response[4] << 16) |
233                            (response[5] << 8)  |  response[6];
234             s->rspreg[3] = (response[0] << 16) | (response[1] << 8) |
235                             response[2];
236             DPRINT_L1("Response received:\n RSPREG[127..96]=0x%08x, RSPREG[95.."
237                   "64]=0x%08x,\n RSPREG[63..32]=0x%08x, RSPREG[31..0]=0x%08x\n",
238                   s->rspreg[3], s->rspreg[2], s->rspreg[1], s->rspreg[0]);
239         } else {
240             ERRPRINT("Timeout waiting for command response\n");
241             if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) {
242                 s->errintsts |= SDHC_EIS_CMDTIMEOUT;
243                 s->norintsts |= SDHC_NIS_ERR;
244             }
245         }
246 
247         if ((s->norintstsen & SDHC_NISEN_TRSCMP) &&
248             (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) {
249             s->norintsts |= SDHC_NIS_TRSCMP;
250         }
251     } else if (rlen != 0 && (s->errintstsen & SDHC_EISEN_CMDIDX)) {
252         s->errintsts |= SDHC_EIS_CMDIDX;
253         s->norintsts |= SDHC_NIS_ERR;
254     }
255 
256     if (s->norintstsen & SDHC_NISEN_CMDCMP) {
257         s->norintsts |= SDHC_NIS_CMDCMP;
258     }
259 
260     sdhci_update_irq(s);
261 
262     if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) {
263         s->data_count = 0;
264         sdhci_do_data_transfer(s);
265     }
266 }
267 
268 static void sdhci_end_transfer(SDHCIState *s)
269 {
270     /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */
271     if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) {
272         SDRequest request;
273         uint8_t response[16];
274 
275         request.cmd = 0x0C;
276         request.arg = 0;
277         DPRINT_L1("Automatically issue CMD%d %08x\n", request.cmd, request.arg);
278         sd_do_command(s->card, &request, response);
279         /* Auto CMD12 response goes to the upper Response register */
280         s->rspreg[3] = (response[0] << 24) | (response[1] << 16) |
281                 (response[2] << 8) | response[3];
282     }
283 
284     s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE |
285             SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT |
286             SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE);
287 
288     if (s->norintstsen & SDHC_NISEN_TRSCMP) {
289         s->norintsts |= SDHC_NIS_TRSCMP;
290     }
291 
292     sdhci_update_irq(s);
293 }
294 
295 /*
296  * Programmed i/o data transfer
297  */
298 
299 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */
300 static void sdhci_read_block_from_card(SDHCIState *s)
301 {
302     int index = 0;
303 
304     if ((s->trnmod & SDHC_TRNS_MULTI) &&
305             (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) {
306         return;
307     }
308 
309     for (index = 0; index < (s->blksize & 0x0fff); index++) {
310         s->fifo_buffer[index] = sd_read_data(s->card);
311     }
312 
313     /* New data now available for READ through Buffer Port Register */
314     s->prnsts |= SDHC_DATA_AVAILABLE;
315     if (s->norintstsen & SDHC_NISEN_RBUFRDY) {
316         s->norintsts |= SDHC_NIS_RBUFRDY;
317     }
318 
319     /* Clear DAT line active status if that was the last block */
320     if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
321             ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) {
322         s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
323     }
324 
325     /* If stop at block gap request was set and it's not the last block of
326      * data - generate Block Event interrupt */
327     if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) &&
328             s->blkcnt != 1)    {
329         s->prnsts &= ~SDHC_DAT_LINE_ACTIVE;
330         if (s->norintstsen & SDHC_EISEN_BLKGAP) {
331             s->norintsts |= SDHC_EIS_BLKGAP;
332         }
333     }
334 
335     sdhci_update_irq(s);
336 }
337 
338 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */
339 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size)
340 {
341     uint32_t value = 0;
342     int i;
343 
344     /* first check that a valid data exists in host controller input buffer */
345     if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) {
346         ERRPRINT("Trying to read from empty buffer\n");
347         return 0;
348     }
349 
350     for (i = 0; i < size; i++) {
351         value |= s->fifo_buffer[s->data_count] << i * 8;
352         s->data_count++;
353         /* check if we've read all valid data (blksize bytes) from buffer */
354         if ((s->data_count) >= (s->blksize & 0x0fff)) {
355             DPRINT_L2("All %u bytes of data have been read from input buffer\n",
356                     s->data_count);
357             s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */
358             s->data_count = 0;  /* next buff read must start at position [0] */
359 
360             if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
361                 s->blkcnt--;
362             }
363 
364             /* if that was the last block of data */
365             if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
366                 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) ||
367                  /* stop at gap request */
368                 (s->stopped_state == sdhc_gap_read &&
369                  !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) {
370                 SDHCI_GET_CLASS(s)->end_data_transfer(s);
371             } else { /* if there are more data, read next block from card */
372                 SDHCI_GET_CLASS(s)->read_block_from_card(s);
373             }
374             break;
375         }
376     }
377 
378     return value;
379 }
380 
381 /* Write data from host controller FIFO to card */
382 static void sdhci_write_block_to_card(SDHCIState *s)
383 {
384     int index = 0;
385 
386     if (s->prnsts & SDHC_SPACE_AVAILABLE) {
387         if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
388             s->norintsts |= SDHC_NIS_WBUFRDY;
389         }
390         sdhci_update_irq(s);
391         return;
392     }
393 
394     if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
395         if (s->blkcnt == 0) {
396             return;
397         } else {
398             s->blkcnt--;
399         }
400     }
401 
402     for (index = 0; index < (s->blksize & 0x0fff); index++) {
403         sd_write_data(s->card, s->fifo_buffer[index]);
404     }
405 
406     /* Next data can be written through BUFFER DATORT register */
407     s->prnsts |= SDHC_SPACE_AVAILABLE;
408 
409     /* Finish transfer if that was the last block of data */
410     if ((s->trnmod & SDHC_TRNS_MULTI) == 0 ||
411             ((s->trnmod & SDHC_TRNS_MULTI) &&
412             (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) {
413         SDHCI_GET_CLASS(s)->end_data_transfer(s);
414     } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) {
415         s->norintsts |= SDHC_NIS_WBUFRDY;
416     }
417 
418     /* Generate Block Gap Event if requested and if not the last block */
419     if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) &&
420             s->blkcnt > 0) {
421         s->prnsts &= ~SDHC_DOING_WRITE;
422         if (s->norintstsen & SDHC_EISEN_BLKGAP) {
423             s->norintsts |= SDHC_EIS_BLKGAP;
424         }
425         SDHCI_GET_CLASS(s)->end_data_transfer(s);
426     }
427 
428     sdhci_update_irq(s);
429 }
430 
431 /* Write @size bytes of @value data to host controller @s Buffer Data Port
432  * register */
433 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size)
434 {
435     unsigned i;
436 
437     /* Check that there is free space left in a buffer */
438     if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) {
439         ERRPRINT("Can't write to data buffer: buffer full\n");
440         return;
441     }
442 
443     for (i = 0; i < size; i++) {
444         s->fifo_buffer[s->data_count] = value & 0xFF;
445         s->data_count++;
446         value >>= 8;
447         if (s->data_count >= (s->blksize & 0x0fff)) {
448             DPRINT_L2("write buffer filled with %u bytes of data\n",
449                     s->data_count);
450             s->data_count = 0;
451             s->prnsts &= ~SDHC_SPACE_AVAILABLE;
452             if (s->prnsts & SDHC_DOING_WRITE) {
453                 SDHCI_GET_CLASS(s)->write_block_to_card(s);
454             }
455         }
456     }
457 }
458 
459 /*
460  * Single DMA data transfer
461  */
462 
463 /* Multi block SDMA transfer */
464 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s)
465 {
466     bool page_aligned = false;
467     unsigned int n, begin;
468     const uint16_t block_size = s->blksize & 0x0fff;
469     uint32_t boundary_chk = 1 << (((s->blksize & 0xf000) >> 12) + 12);
470     uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk);
471 
472     /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for
473      * possible stop at page boundary if initial address is not page aligned,
474      * allow them to work properly */
475     if ((s->sdmasysad % boundary_chk) == 0) {
476         page_aligned = true;
477     }
478 
479     if (s->trnmod & SDHC_TRNS_READ) {
480         s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
481                 SDHC_DAT_LINE_ACTIVE;
482         while (s->blkcnt) {
483             if (s->data_count == 0) {
484                 for (n = 0; n < block_size; n++) {
485                     s->fifo_buffer[n] = sd_read_data(s->card);
486                 }
487             }
488             begin = s->data_count;
489             if (((boundary_count + begin) < block_size) && page_aligned) {
490                 s->data_count = boundary_count + begin;
491                 boundary_count = 0;
492              } else {
493                 s->data_count = block_size;
494                 boundary_count -= block_size - begin;
495                 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
496                     s->blkcnt--;
497                 }
498             }
499             dma_memory_write(&dma_context_memory, s->sdmasysad,
500                              &s->fifo_buffer[begin], s->data_count - begin);
501             s->sdmasysad += s->data_count - begin;
502             if (s->data_count == block_size) {
503                 s->data_count = 0;
504             }
505             if (page_aligned && boundary_count == 0) {
506                 break;
507             }
508         }
509     } else {
510         s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT |
511                 SDHC_DAT_LINE_ACTIVE;
512         while (s->blkcnt) {
513             begin = s->data_count;
514             if (((boundary_count + begin) < block_size) && page_aligned) {
515                 s->data_count = boundary_count + begin;
516                 boundary_count = 0;
517              } else {
518                 s->data_count = block_size;
519                 boundary_count -= block_size - begin;
520             }
521             dma_memory_read(&dma_context_memory, s->sdmasysad,
522                             &s->fifo_buffer[begin], s->data_count);
523             s->sdmasysad += s->data_count - begin;
524             if (s->data_count == block_size) {
525                 for (n = 0; n < block_size; n++) {
526                     sd_write_data(s->card, s->fifo_buffer[n]);
527                 }
528                 s->data_count = 0;
529                 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
530                     s->blkcnt--;
531                 }
532             }
533             if (page_aligned && boundary_count == 0) {
534                 break;
535             }
536         }
537     }
538 
539     if (s->blkcnt == 0) {
540         SDHCI_GET_CLASS(s)->end_data_transfer(s);
541     } else {
542         if (s->norintstsen & SDHC_NISEN_DMA) {
543             s->norintsts |= SDHC_NIS_DMA;
544         }
545         sdhci_update_irq(s);
546     }
547 }
548 
549 /* single block SDMA transfer */
550 
551 static void sdhci_sdma_transfer_single_block(SDHCIState *s)
552 {
553     int n;
554     uint32_t datacnt = s->blksize & 0x0fff;
555 
556     if (s->trnmod & SDHC_TRNS_READ) {
557         for (n = 0; n < datacnt; n++) {
558             s->fifo_buffer[n] = sd_read_data(s->card);
559         }
560         dma_memory_write(&dma_context_memory, s->sdmasysad, s->fifo_buffer,
561                          datacnt);
562     } else {
563         dma_memory_read(&dma_context_memory, s->sdmasysad, s->fifo_buffer,
564                         datacnt);
565         for (n = 0; n < datacnt; n++) {
566             sd_write_data(s->card, s->fifo_buffer[n]);
567         }
568     }
569 
570     if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
571         s->blkcnt--;
572     }
573 
574     SDHCI_GET_CLASS(s)->end_data_transfer(s);
575 }
576 
577 typedef struct ADMADescr {
578     hwaddr addr;
579     uint16_t length;
580     uint8_t attr;
581     uint8_t incr;
582 } ADMADescr;
583 
584 static void get_adma_description(SDHCIState *s, ADMADescr *dscr)
585 {
586     uint32_t adma1 = 0;
587     uint64_t adma2 = 0;
588     hwaddr entry_addr = (hwaddr)s->admasysaddr;
589     switch (SDHC_DMA_TYPE(s->hostctl)) {
590     case SDHC_CTRL_ADMA2_32:
591         dma_memory_read(&dma_context_memory, entry_addr, (uint8_t *)&adma2,
592                         sizeof(adma2));
593         adma2 = le64_to_cpu(adma2);
594         /* The spec does not specify endianness of descriptor table.
595          * We currently assume that it is LE.
596          */
597         dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull;
598         dscr->length = (uint16_t)extract64(adma2, 16, 16);
599         dscr->attr = (uint8_t)extract64(adma2, 0, 7);
600         dscr->incr = 8;
601         break;
602     case SDHC_CTRL_ADMA1_32:
603         dma_memory_read(&dma_context_memory, entry_addr, (uint8_t *)&adma1,
604                         sizeof(adma1));
605         adma1 = le32_to_cpu(adma1);
606         dscr->addr = (hwaddr)(adma1 & 0xFFFFF000);
607         dscr->attr = (uint8_t)extract32(adma1, 0, 7);
608         dscr->incr = 4;
609         if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) {
610             dscr->length = (uint16_t)extract32(adma1, 12, 16);
611         } else {
612             dscr->length = 4096;
613         }
614         break;
615     case SDHC_CTRL_ADMA2_64:
616         dma_memory_read(&dma_context_memory, entry_addr,
617                         (uint8_t *)(&dscr->attr), 1);
618         dma_memory_read(&dma_context_memory, entry_addr + 2,
619                         (uint8_t *)(&dscr->length), 2);
620         dscr->length = le16_to_cpu(dscr->length);
621         dma_memory_read(&dma_context_memory, entry_addr + 4,
622                         (uint8_t *)(&dscr->addr), 8);
623         dscr->attr = le64_to_cpu(dscr->attr);
624         dscr->attr &= 0xfffffff8;
625         dscr->incr = 12;
626         break;
627     }
628 }
629 
630 /* Advanced DMA data transfer */
631 
632 static void sdhci_do_adma(SDHCIState *s)
633 {
634     unsigned int n, begin, length;
635     const uint16_t block_size = s->blksize & 0x0fff;
636     ADMADescr dscr;
637     int i;
638 
639     for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) {
640         s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH;
641 
642         get_adma_description(s, &dscr);
643         DPRINT_L2("ADMA loop: addr=" TARGET_FMT_plx ", len=%d, attr=%x\n",
644                 dscr.addr, dscr.length, dscr.attr);
645 
646         if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) {
647             /* Indicate that error occurred in ST_FDS state */
648             s->admaerr &= ~SDHC_ADMAERR_STATE_MASK;
649             s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS;
650 
651             /* Generate ADMA error interrupt */
652             if (s->errintstsen & SDHC_EISEN_ADMAERR) {
653                 s->errintsts |= SDHC_EIS_ADMAERR;
654                 s->norintsts |= SDHC_NIS_ERR;
655             }
656 
657             sdhci_update_irq(s);
658             return;
659         }
660 
661         length = dscr.length ? dscr.length : 65536;
662 
663         switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) {
664         case SDHC_ADMA_ATTR_ACT_TRAN:  /* data transfer */
665 
666             if (s->trnmod & SDHC_TRNS_READ) {
667                 while (length) {
668                     if (s->data_count == 0) {
669                         for (n = 0; n < block_size; n++) {
670                             s->fifo_buffer[n] = sd_read_data(s->card);
671                         }
672                     }
673                     begin = s->data_count;
674                     if ((length + begin) < block_size) {
675                         s->data_count = length + begin;
676                         length = 0;
677                      } else {
678                         s->data_count = block_size;
679                         length -= block_size - begin;
680                     }
681                     dma_memory_write(&dma_context_memory, dscr.addr,
682                                      &s->fifo_buffer[begin],
683                                      s->data_count - begin);
684                     dscr.addr += s->data_count - begin;
685                     if (s->data_count == block_size) {
686                         s->data_count = 0;
687                         if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
688                             s->blkcnt--;
689                             if (s->blkcnt == 0) {
690                                 break;
691                             }
692                         }
693                     }
694                 }
695             } else {
696                 while (length) {
697                     begin = s->data_count;
698                     if ((length + begin) < block_size) {
699                         s->data_count = length + begin;
700                         length = 0;
701                      } else {
702                         s->data_count = block_size;
703                         length -= block_size - begin;
704                     }
705                     dma_memory_read(&dma_context_memory, dscr.addr,
706                                     &s->fifo_buffer[begin], s->data_count);
707                     dscr.addr += s->data_count - begin;
708                     if (s->data_count == block_size) {
709                         for (n = 0; n < block_size; n++) {
710                             sd_write_data(s->card, s->fifo_buffer[n]);
711                         }
712                         s->data_count = 0;
713                         if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) {
714                             s->blkcnt--;
715                             if (s->blkcnt == 0) {
716                                 break;
717                             }
718                         }
719                     }
720                 }
721             }
722             s->admasysaddr += dscr.incr;
723             break;
724         case SDHC_ADMA_ATTR_ACT_LINK:   /* link to next descriptor table */
725             s->admasysaddr = dscr.addr;
726             DPRINT_L1("ADMA link: admasysaddr=0x%lx\n", s->admasysaddr);
727             break;
728         default:
729             s->admasysaddr += dscr.incr;
730             break;
731         }
732 
733         if (dscr.attr & SDHC_ADMA_ATTR_INT) {
734             DPRINT_L1("ADMA interrupt: admasysaddr=0x%lx\n", s->admasysaddr);
735             if (s->norintstsen & SDHC_NISEN_DMA) {
736                 s->norintsts |= SDHC_NIS_DMA;
737             }
738 
739             sdhci_update_irq(s);
740         }
741 
742         /* ADMA transfer terminates if blkcnt == 0 or by END attribute */
743         if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
744                     (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) {
745             DPRINT_L2("ADMA transfer completed\n");
746             if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) &&
747                 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) &&
748                 s->blkcnt != 0)) {
749                 ERRPRINT("SD/MMC host ADMA length mismatch\n");
750                 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH |
751                         SDHC_ADMAERR_STATE_ST_TFR;
752                 if (s->errintstsen & SDHC_EISEN_ADMAERR) {
753                     ERRPRINT("Set ADMA error flag\n");
754                     s->errintsts |= SDHC_EIS_ADMAERR;
755                     s->norintsts |= SDHC_NIS_ERR;
756                 }
757 
758                 sdhci_update_irq(s);
759             }
760             SDHCI_GET_CLASS(s)->end_data_transfer(s);
761             return;
762         }
763 
764     }
765 
766     /* we have unfinished business - reschedule to continue ADMA */
767     qemu_mod_timer(s->transfer_timer,
768                    qemu_get_clock_ns(vm_clock) + SDHC_TRANSFER_DELAY);
769 }
770 
771 /* Perform data transfer according to controller configuration */
772 
773 static void sdhci_data_transfer(SDHCIState *s)
774 {
775     SDHCIClass *k = SDHCI_GET_CLASS(s);
776 
777     if (s->trnmod & SDHC_TRNS_DMA) {
778         switch (SDHC_DMA_TYPE(s->hostctl)) {
779         case SDHC_CTRL_SDMA:
780             if ((s->trnmod & SDHC_TRNS_MULTI) &&
781                     (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || s->blkcnt == 0)) {
782                 break;
783             }
784 
785             if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) {
786                 k->do_sdma_single(s);
787             } else {
788                 k->do_sdma_multi(s);
789             }
790 
791             break;
792         case SDHC_CTRL_ADMA1_32:
793             if (!(s->capareg & SDHC_CAN_DO_ADMA1)) {
794                 ERRPRINT("ADMA1 not supported\n");
795                 break;
796             }
797 
798             k->do_adma(s);
799             break;
800         case SDHC_CTRL_ADMA2_32:
801             if (!(s->capareg & SDHC_CAN_DO_ADMA2)) {
802                 ERRPRINT("ADMA2 not supported\n");
803                 break;
804             }
805 
806             k->do_adma(s);
807             break;
808         case SDHC_CTRL_ADMA2_64:
809             if (!(s->capareg & SDHC_CAN_DO_ADMA2) ||
810                     !(s->capareg & SDHC_64_BIT_BUS_SUPPORT)) {
811                 ERRPRINT("64 bit ADMA not supported\n");
812                 break;
813             }
814 
815             k->do_adma(s);
816             break;
817         default:
818             ERRPRINT("Unsupported DMA type\n");
819             break;
820         }
821     } else {
822         if ((s->trnmod & SDHC_TRNS_READ) && sd_data_ready(s->card)) {
823             s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT |
824                     SDHC_DAT_LINE_ACTIVE;
825             SDHCI_GET_CLASS(s)->read_block_from_card(s);
826         } else {
827             s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE |
828                     SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT;
829             SDHCI_GET_CLASS(s)->write_block_to_card(s);
830         }
831     }
832 }
833 
834 static bool sdhci_can_issue_command(SDHCIState *s)
835 {
836     if (!SDHC_CLOCK_IS_ON(s->clkcon) || !(s->pwrcon & SDHC_POWER_ON) ||
837         (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) &&
838         ((s->cmdreg & SDHC_CMD_DATA_PRESENT) ||
839         ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY &&
840         !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) {
841         return false;
842     }
843 
844     return true;
845 }
846 
847 /* The Buffer Data Port register must be accessed in sequential and
848  * continuous manner */
849 static inline bool
850 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num)
851 {
852     if ((s->data_count & 0x3) != byte_num) {
853         ERRPRINT("Non-sequential access to Buffer Data Port register"
854                 "is prohibited\n");
855         return false;
856     }
857     return true;
858 }
859 
860 static uint32_t sdhci_read(SDHCIState *s, unsigned int offset, unsigned size)
861 {
862     uint32_t ret = 0;
863 
864     switch (offset & ~0x3) {
865     case SDHC_SYSAD:
866         ret = s->sdmasysad;
867         break;
868     case SDHC_BLKSIZE:
869         ret = s->blksize | (s->blkcnt << 16);
870         break;
871     case SDHC_ARGUMENT:
872         ret = s->argument;
873         break;
874     case SDHC_TRNMOD:
875         ret = s->trnmod | (s->cmdreg << 16);
876         break;
877     case SDHC_RSPREG0 ... SDHC_RSPREG3:
878         ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2];
879         break;
880     case  SDHC_BDATA:
881         if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
882             ret = SDHCI_GET_CLASS(s)->bdata_read(s, size);
883             DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, offset,
884                       ret, ret);
885             return ret;
886         }
887         break;
888     case SDHC_PRNSTS:
889         ret = s->prnsts;
890         break;
891     case SDHC_HOSTCTL:
892         ret = s->hostctl | (s->pwrcon << 8) | (s->blkgap << 16) |
893               (s->wakcon << 24);
894         break;
895     case SDHC_CLKCON:
896         ret = s->clkcon | (s->timeoutcon << 16);
897         break;
898     case SDHC_NORINTSTS:
899         ret = s->norintsts | (s->errintsts << 16);
900         break;
901     case SDHC_NORINTSTSEN:
902         ret = s->norintstsen | (s->errintstsen << 16);
903         break;
904     case SDHC_NORINTSIGEN:
905         ret = s->norintsigen | (s->errintsigen << 16);
906         break;
907     case SDHC_ACMD12ERRSTS:
908         ret = s->acmd12errsts;
909         break;
910     case SDHC_CAPAREG:
911         ret = s->capareg;
912         break;
913     case SDHC_MAXCURR:
914         ret = s->maxcurr;
915         break;
916     case SDHC_ADMAERR:
917         ret =  s->admaerr;
918         break;
919     case SDHC_ADMASYSADDR:
920         ret = (uint32_t)s->admasysaddr;
921         break;
922     case SDHC_ADMASYSADDR + 4:
923         ret = (uint32_t)(s->admasysaddr >> 32);
924         break;
925     case SDHC_SLOT_INT_STATUS:
926         ret = (SD_HOST_SPECv2_VERS << 16) | sdhci_slotint(s);
927         break;
928     default:
929         ERRPRINT("bad %ub read: addr[0x%04x]\n", size, offset);
930         break;
931     }
932 
933     ret >>= (offset & 0x3) * 8;
934     ret &= (1ULL << (size * 8)) - 1;
935     DPRINT_L2("read %ub: addr[0x%04x] -> %u(0x%x)\n", size, offset, ret, ret);
936     return ret;
937 }
938 
939 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value)
940 {
941     if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) {
942         return;
943     }
944     s->blkgap = value & SDHC_STOP_AT_GAP_REQ;
945 
946     if ((value & SDHC_CONTINUE_REQ) && s->stopped_state &&
947             (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) {
948         if (s->stopped_state == sdhc_gap_read) {
949             s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ;
950             SDHCI_GET_CLASS(s)->read_block_from_card(s);
951         } else {
952             s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE;
953             SDHCI_GET_CLASS(s)->write_block_to_card(s);
954         }
955         s->stopped_state = sdhc_not_stopped;
956     } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) {
957         if (s->prnsts & SDHC_DOING_READ) {
958             s->stopped_state = sdhc_gap_read;
959         } else if (s->prnsts & SDHC_DOING_WRITE) {
960             s->stopped_state = sdhc_gap_write;
961         }
962     }
963 }
964 
965 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value)
966 {
967     switch (value) {
968     case SDHC_RESET_ALL:
969         DEVICE_GET_CLASS(s)->reset(DEVICE(s));
970         break;
971     case SDHC_RESET_CMD:
972         s->prnsts &= ~SDHC_CMD_INHIBIT;
973         s->norintsts &= ~SDHC_NIS_CMDCMP;
974         break;
975     case SDHC_RESET_DATA:
976         s->data_count = 0;
977         s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE |
978                 SDHC_DOING_READ | SDHC_DOING_WRITE |
979                 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE);
980         s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ);
981         s->stopped_state = sdhc_not_stopped;
982         s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY |
983                 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP);
984         break;
985     }
986 }
987 
988 static void
989 sdhci_write(SDHCIState *s, unsigned int offset, uint32_t value, unsigned size)
990 {
991     unsigned shift =  8 * (offset & 0x3);
992     uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift);
993     value <<= shift;
994 
995     switch (offset & ~0x3) {
996     case SDHC_SYSAD:
997         s->sdmasysad = (s->sdmasysad & mask) | value;
998         MASKED_WRITE(s->sdmasysad, mask, value);
999         /* Writing to last byte of sdmasysad might trigger transfer */
1000         if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt &&
1001                 s->blksize && SDHC_DMA_TYPE(s->hostctl) == SDHC_CTRL_SDMA) {
1002             SDHCI_GET_CLASS(s)->do_sdma_multi(s);
1003         }
1004         break;
1005     case SDHC_BLKSIZE:
1006         if (!TRANSFERRING_DATA(s->prnsts)) {
1007             MASKED_WRITE(s->blksize, mask, value);
1008             MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16);
1009         }
1010         break;
1011     case SDHC_ARGUMENT:
1012         MASKED_WRITE(s->argument, mask, value);
1013         break;
1014     case SDHC_TRNMOD:
1015         /* DMA can be enabled only if it is supported as indicated by
1016          * capabilities register */
1017         if (!(s->capareg & SDHC_CAN_DO_DMA)) {
1018             value &= ~SDHC_TRNS_DMA;
1019         }
1020         MASKED_WRITE(s->trnmod, mask, value);
1021         MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16);
1022 
1023         /* Writing to the upper byte of CMDREG triggers SD command generation */
1024         if ((mask & 0xFF000000) || !SDHCI_GET_CLASS(s)->can_issue_command(s)) {
1025             break;
1026         }
1027 
1028         SDHCI_GET_CLASS(s)->send_command(s);
1029         break;
1030     case  SDHC_BDATA:
1031         if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) {
1032             SDHCI_GET_CLASS(s)->bdata_write(s, value >> shift, size);
1033         }
1034         break;
1035     case SDHC_HOSTCTL:
1036         if (!(mask & 0xFF0000)) {
1037             sdhci_blkgap_write(s, value >> 16);
1038         }
1039         MASKED_WRITE(s->hostctl, mask, value);
1040         MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8);
1041         MASKED_WRITE(s->wakcon, mask >> 24, value >> 24);
1042         if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 ||
1043                 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) {
1044             s->pwrcon &= ~SDHC_POWER_ON;
1045         }
1046         break;
1047     case SDHC_CLKCON:
1048         if (!(mask & 0xFF000000)) {
1049             sdhci_reset_write(s, value >> 24);
1050         }
1051         MASKED_WRITE(s->clkcon, mask, value);
1052         MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16);
1053         if (s->clkcon & SDHC_CLOCK_INT_EN) {
1054             s->clkcon |= SDHC_CLOCK_INT_STABLE;
1055         } else {
1056             s->clkcon &= ~SDHC_CLOCK_INT_STABLE;
1057         }
1058         break;
1059     case SDHC_NORINTSTS:
1060         if (s->norintstsen & SDHC_NISEN_CARDINT) {
1061             value &= ~SDHC_NIS_CARDINT;
1062         }
1063         s->norintsts &= mask | ~value;
1064         s->errintsts &= (mask >> 16) | ~(value >> 16);
1065         if (s->errintsts) {
1066             s->norintsts |= SDHC_NIS_ERR;
1067         } else {
1068             s->norintsts &= ~SDHC_NIS_ERR;
1069         }
1070         sdhci_update_irq(s);
1071         break;
1072     case SDHC_NORINTSTSEN:
1073         MASKED_WRITE(s->norintstsen, mask, value);
1074         MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16);
1075         s->norintsts &= s->norintstsen;
1076         s->errintsts &= s->errintstsen;
1077         if (s->errintsts) {
1078             s->norintsts |= SDHC_NIS_ERR;
1079         } else {
1080             s->norintsts &= ~SDHC_NIS_ERR;
1081         }
1082         sdhci_update_irq(s);
1083         break;
1084     case SDHC_NORINTSIGEN:
1085         MASKED_WRITE(s->norintsigen, mask, value);
1086         MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16);
1087         sdhci_update_irq(s);
1088         break;
1089     case SDHC_ADMAERR:
1090         MASKED_WRITE(s->admaerr, mask, value);
1091         break;
1092     case SDHC_ADMASYSADDR:
1093         s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL |
1094                 (uint64_t)mask)) | (uint64_t)value;
1095         break;
1096     case SDHC_ADMASYSADDR + 4:
1097         s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL |
1098                 ((uint64_t)mask << 32))) | ((uint64_t)value << 32);
1099         break;
1100     case SDHC_FEAER:
1101         s->acmd12errsts |= value;
1102         s->errintsts |= (value >> 16) & s->errintstsen;
1103         if (s->acmd12errsts) {
1104             s->errintsts |= SDHC_EIS_CMD12ERR;
1105         }
1106         if (s->errintsts) {
1107             s->norintsts |= SDHC_NIS_ERR;
1108         }
1109         sdhci_update_irq(s);
1110         break;
1111     default:
1112         ERRPRINT("bad %ub write offset: addr[0x%04x] <- %u(0x%x)\n",
1113                 size, offset, value >> shift, value >> shift);
1114         break;
1115     }
1116     DPRINT_L2("write %ub: addr[0x%04x] <- %u(0x%x)\n",
1117             size, offset, value >> shift, value >> shift);
1118 }
1119 
1120 static uint64_t
1121 sdhci_readfn(void *opaque, hwaddr offset, unsigned size)
1122 {
1123     SDHCIState *s = (SDHCIState *)opaque;
1124 
1125     return SDHCI_GET_CLASS(s)->mem_read(s, offset, size);
1126 }
1127 
1128 static void
1129 sdhci_writefn(void *opaque, hwaddr off, uint64_t val, unsigned sz)
1130 {
1131     SDHCIState *s = (SDHCIState *)opaque;
1132 
1133     SDHCI_GET_CLASS(s)->mem_write(s, off, val, sz);
1134 }
1135 
1136 static const MemoryRegionOps sdhci_mmio_ops = {
1137     .read = sdhci_readfn,
1138     .write = sdhci_writefn,
1139     .valid = {
1140         .min_access_size = 1,
1141         .max_access_size = 4,
1142         .unaligned = false
1143     },
1144     .endianness = DEVICE_LITTLE_ENDIAN,
1145 };
1146 
1147 static inline unsigned int sdhci_get_fifolen(SDHCIState *s)
1148 {
1149     switch (SDHC_CAPAB_BLOCKSIZE(s->capareg)) {
1150     case 0:
1151         return 512;
1152     case 1:
1153         return 1024;
1154     case 2:
1155         return 2048;
1156     default:
1157         hw_error("SDHC: unsupported value for maximum block size\n");
1158         return 0;
1159     }
1160 }
1161 
1162 static void sdhci_initfn(Object *obj)
1163 {
1164     SDHCIState *s = SDHCI(obj);
1165     DriveInfo *di;
1166 
1167     di = drive_get_next(IF_SD);
1168     s->card = sd_init(di ? di->bdrv : NULL, 0);
1169     s->eject_cb = qemu_allocate_irqs(sdhci_insert_eject_cb, s, 1)[0];
1170     s->ro_cb = qemu_allocate_irqs(sdhci_card_readonly_cb, s, 1)[0];
1171     sd_set_cb(s->card, s->ro_cb, s->eject_cb);
1172 
1173     s->insert_timer = qemu_new_timer_ns(vm_clock, sdhci_raise_insertion_irq, s);
1174     s->transfer_timer = qemu_new_timer_ns(vm_clock, sdhci_do_data_transfer, s);
1175 }
1176 
1177 static void sdhci_uninitfn(Object *obj)
1178 {
1179     SDHCIState *s = SDHCI(obj);
1180 
1181     qemu_del_timer(s->insert_timer);
1182     qemu_free_timer(s->insert_timer);
1183     qemu_del_timer(s->transfer_timer);
1184     qemu_free_timer(s->transfer_timer);
1185     qemu_free_irqs(&s->eject_cb);
1186     qemu_free_irqs(&s->ro_cb);
1187 
1188     if (s->fifo_buffer) {
1189         g_free(s->fifo_buffer);
1190         s->fifo_buffer = NULL;
1191     }
1192 }
1193 
1194 const VMStateDescription sdhci_vmstate = {
1195     .name = "sdhci",
1196     .version_id = 1,
1197     .minimum_version_id = 1,
1198     .fields      = (VMStateField[]) {
1199         VMSTATE_UINT32(sdmasysad, SDHCIState),
1200         VMSTATE_UINT16(blksize, SDHCIState),
1201         VMSTATE_UINT16(blkcnt, SDHCIState),
1202         VMSTATE_UINT32(argument, SDHCIState),
1203         VMSTATE_UINT16(trnmod, SDHCIState),
1204         VMSTATE_UINT16(cmdreg, SDHCIState),
1205         VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4),
1206         VMSTATE_UINT32(prnsts, SDHCIState),
1207         VMSTATE_UINT8(hostctl, SDHCIState),
1208         VMSTATE_UINT8(pwrcon, SDHCIState),
1209         VMSTATE_UINT8(blkgap, SDHCIState),
1210         VMSTATE_UINT8(wakcon, SDHCIState),
1211         VMSTATE_UINT16(clkcon, SDHCIState),
1212         VMSTATE_UINT8(timeoutcon, SDHCIState),
1213         VMSTATE_UINT8(admaerr, SDHCIState),
1214         VMSTATE_UINT16(norintsts, SDHCIState),
1215         VMSTATE_UINT16(errintsts, SDHCIState),
1216         VMSTATE_UINT16(norintstsen, SDHCIState),
1217         VMSTATE_UINT16(errintstsen, SDHCIState),
1218         VMSTATE_UINT16(norintsigen, SDHCIState),
1219         VMSTATE_UINT16(errintsigen, SDHCIState),
1220         VMSTATE_UINT16(acmd12errsts, SDHCIState),
1221         VMSTATE_UINT16(data_count, SDHCIState),
1222         VMSTATE_UINT64(admasysaddr, SDHCIState),
1223         VMSTATE_UINT8(stopped_state, SDHCIState),
1224         VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, 0, buf_maxsz),
1225         VMSTATE_TIMER(insert_timer, SDHCIState),
1226         VMSTATE_TIMER(transfer_timer, SDHCIState),
1227         VMSTATE_END_OF_LIST()
1228     }
1229 };
1230 
1231 /* Capabilities registers provide information on supported features of this
1232  * specific host controller implementation */
1233 static Property sdhci_properties[] = {
1234     DEFINE_PROP_HEX32("capareg", SDHCIState, capareg,
1235             SDHC_CAPAB_REG_DEFAULT),
1236     DEFINE_PROP_HEX32("maxcurr", SDHCIState, maxcurr, 0),
1237     DEFINE_PROP_END_OF_LIST(),
1238 };
1239 
1240 static void sdhci_realize(DeviceState *dev, Error ** errp)
1241 {
1242     SDHCIState *s = SDHCI(dev);
1243     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
1244 
1245     s->buf_maxsz = sdhci_get_fifolen(s);
1246     s->fifo_buffer = g_malloc0(s->buf_maxsz);
1247     sysbus_init_irq(sbd, &s->irq);
1248     memory_region_init_io(&s->iomem, &sdhci_mmio_ops, s, "sdhci",
1249             SDHC_REGISTERS_MAP_SIZE);
1250     sysbus_init_mmio(sbd, &s->iomem);
1251 }
1252 
1253 static void sdhci_generic_reset(DeviceState *ds)
1254 {
1255     SDHCIState *s = SDHCI(ds);
1256     SDHCI_GET_CLASS(s)->reset(s);
1257 }
1258 
1259 static void sdhci_class_init(ObjectClass *klass, void *data)
1260 {
1261     DeviceClass *dc = DEVICE_CLASS(klass);
1262     SDHCIClass *k = SDHCI_CLASS(klass);
1263 
1264     dc->vmsd = &sdhci_vmstate;
1265     dc->props = sdhci_properties;
1266     dc->reset = sdhci_generic_reset;
1267     dc->realize = sdhci_realize;
1268 
1269     k->reset = sdhci_reset;
1270     k->mem_read = sdhci_read;
1271     k->mem_write = sdhci_write;
1272     k->send_command = sdhci_send_command;
1273     k->can_issue_command = sdhci_can_issue_command;
1274     k->data_transfer = sdhci_data_transfer;
1275     k->end_data_transfer = sdhci_end_transfer;
1276     k->do_sdma_single = sdhci_sdma_transfer_single_block;
1277     k->do_sdma_multi = sdhci_sdma_transfer_multi_blocks;
1278     k->do_adma = sdhci_do_adma;
1279     k->read_block_from_card = sdhci_read_block_from_card;
1280     k->write_block_to_card = sdhci_write_block_to_card;
1281     k->bdata_read = sdhci_read_dataport;
1282     k->bdata_write = sdhci_write_dataport;
1283 }
1284 
1285 static const TypeInfo sdhci_type_info = {
1286     .name = TYPE_SDHCI,
1287     .parent = TYPE_SYS_BUS_DEVICE,
1288     .instance_size = sizeof(SDHCIState),
1289     .instance_init = sdhci_initfn,
1290     .instance_finalize = sdhci_uninitfn,
1291     .class_init = sdhci_class_init,
1292     .class_size = sizeof(SDHCIClass)
1293 };
1294 
1295 static void sdhci_register_types(void)
1296 {
1297     type_register_static(&sdhci_type_info);
1298 }
1299 
1300 type_init(sdhci_register_types)
1301