1 /* 2 * SD Association Host Standard Specification v2.0 controller emulation 3 * 4 * Copyright (c) 2011 Samsung Electronics Co., Ltd. 5 * Mitsyanko Igor <i.mitsyanko@samsung.com> 6 * Peter A.G. Crosthwaite <peter.crosthwaite@petalogix.com> 7 * 8 * Based on MMC controller for Samsung S5PC1xx-based board emulation 9 * by Alexey Merkulov and Vladimir Monakhov. 10 * 11 * This program is free software; you can redistribute it and/or modify it 12 * under the terms of the GNU General Public License as published by the 13 * Free Software Foundation; either version 2 of the License, or (at your 14 * option) any later version. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 19 * See the GNU General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License along 22 * with this program; if not, see <http://www.gnu.org/licenses/>. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "qemu/error-report.h" 28 #include "qapi/error.h" 29 #include "hw/irq.h" 30 #include "hw/qdev-properties.h" 31 #include "sysemu/dma.h" 32 #include "qemu/timer.h" 33 #include "qemu/bitops.h" 34 #include "hw/sd/sdhci.h" 35 #include "migration/vmstate.h" 36 #include "sdhci-internal.h" 37 #include "qemu/log.h" 38 #include "qemu/module.h" 39 #include "trace.h" 40 41 #define TYPE_SDHCI_BUS "sdhci-bus" 42 #define SDHCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_SDHCI_BUS) 43 44 #define MASKED_WRITE(reg, mask, val) (reg = (reg & (mask)) | (val)) 45 46 static inline unsigned int sdhci_get_fifolen(SDHCIState *s) 47 { 48 return 1 << (9 + FIELD_EX32(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH)); 49 } 50 51 /* return true on error */ 52 static bool sdhci_check_capab_freq_range(SDHCIState *s, const char *desc, 53 uint8_t freq, Error **errp) 54 { 55 if (s->sd_spec_version >= 3) { 56 return false; 57 } 58 switch (freq) { 59 case 0: 60 case 10 ... 63: 61 break; 62 default: 63 error_setg(errp, "SD %s clock frequency can have value" 64 "in range 0-63 only", desc); 65 return true; 66 } 67 return false; 68 } 69 70 static void sdhci_check_capareg(SDHCIState *s, Error **errp) 71 { 72 uint64_t msk = s->capareg; 73 uint32_t val; 74 bool y; 75 76 switch (s->sd_spec_version) { 77 case 4: 78 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT_V4); 79 trace_sdhci_capareg("64-bit system bus (v4)", val); 80 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT_V4, 0); 81 82 val = FIELD_EX64(s->capareg, SDHC_CAPAB, UHS_II); 83 trace_sdhci_capareg("UHS-II", val); 84 msk = FIELD_DP64(msk, SDHC_CAPAB, UHS_II, 0); 85 86 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA3); 87 trace_sdhci_capareg("ADMA3", val); 88 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA3, 0); 89 90 /* fallthrough */ 91 case 3: 92 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ASYNC_INT); 93 trace_sdhci_capareg("async interrupt", val); 94 msk = FIELD_DP64(msk, SDHC_CAPAB, ASYNC_INT, 0); 95 96 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SLOT_TYPE); 97 if (val) { 98 error_setg(errp, "slot-type not supported"); 99 return; 100 } 101 trace_sdhci_capareg("slot type", val); 102 msk = FIELD_DP64(msk, SDHC_CAPAB, SLOT_TYPE, 0); 103 104 if (val != 2) { 105 val = FIELD_EX64(s->capareg, SDHC_CAPAB, EMBEDDED_8BIT); 106 trace_sdhci_capareg("8-bit bus", val); 107 } 108 msk = FIELD_DP64(msk, SDHC_CAPAB, EMBEDDED_8BIT, 0); 109 110 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS_SPEED); 111 trace_sdhci_capareg("bus speed mask", val); 112 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS_SPEED, 0); 113 114 val = FIELD_EX64(s->capareg, SDHC_CAPAB, DRIVER_STRENGTH); 115 trace_sdhci_capareg("driver strength mask", val); 116 msk = FIELD_DP64(msk, SDHC_CAPAB, DRIVER_STRENGTH, 0); 117 118 val = FIELD_EX64(s->capareg, SDHC_CAPAB, TIMER_RETUNING); 119 trace_sdhci_capareg("timer re-tuning", val); 120 msk = FIELD_DP64(msk, SDHC_CAPAB, TIMER_RETUNING, 0); 121 122 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDR50_TUNING); 123 trace_sdhci_capareg("use SDR50 tuning", val); 124 msk = FIELD_DP64(msk, SDHC_CAPAB, SDR50_TUNING, 0); 125 126 val = FIELD_EX64(s->capareg, SDHC_CAPAB, RETUNING_MODE); 127 trace_sdhci_capareg("re-tuning mode", val); 128 msk = FIELD_DP64(msk, SDHC_CAPAB, RETUNING_MODE, 0); 129 130 val = FIELD_EX64(s->capareg, SDHC_CAPAB, CLOCK_MULT); 131 trace_sdhci_capareg("clock multiplier", val); 132 msk = FIELD_DP64(msk, SDHC_CAPAB, CLOCK_MULT, 0); 133 134 /* fallthrough */ 135 case 2: /* default version */ 136 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA2); 137 trace_sdhci_capareg("ADMA2", val); 138 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA2, 0); 139 140 val = FIELD_EX64(s->capareg, SDHC_CAPAB, ADMA1); 141 trace_sdhci_capareg("ADMA1", val); 142 msk = FIELD_DP64(msk, SDHC_CAPAB, ADMA1, 0); 143 144 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BUS64BIT); 145 trace_sdhci_capareg("64-bit system bus (v3)", val); 146 msk = FIELD_DP64(msk, SDHC_CAPAB, BUS64BIT, 0); 147 148 /* fallthrough */ 149 case 1: 150 y = FIELD_EX64(s->capareg, SDHC_CAPAB, TOUNIT); 151 msk = FIELD_DP64(msk, SDHC_CAPAB, TOUNIT, 0); 152 153 val = FIELD_EX64(s->capareg, SDHC_CAPAB, TOCLKFREQ); 154 trace_sdhci_capareg(y ? "timeout (MHz)" : "Timeout (KHz)", val); 155 if (sdhci_check_capab_freq_range(s, "timeout", val, errp)) { 156 return; 157 } 158 msk = FIELD_DP64(msk, SDHC_CAPAB, TOCLKFREQ, 0); 159 160 val = FIELD_EX64(s->capareg, SDHC_CAPAB, BASECLKFREQ); 161 trace_sdhci_capareg(y ? "base (MHz)" : "Base (KHz)", val); 162 if (sdhci_check_capab_freq_range(s, "base", val, errp)) { 163 return; 164 } 165 msk = FIELD_DP64(msk, SDHC_CAPAB, BASECLKFREQ, 0); 166 167 val = FIELD_EX64(s->capareg, SDHC_CAPAB, MAXBLOCKLENGTH); 168 if (val >= 3) { 169 error_setg(errp, "block size can be 512, 1024 or 2048 only"); 170 return; 171 } 172 trace_sdhci_capareg("max block length", sdhci_get_fifolen(s)); 173 msk = FIELD_DP64(msk, SDHC_CAPAB, MAXBLOCKLENGTH, 0); 174 175 val = FIELD_EX64(s->capareg, SDHC_CAPAB, HIGHSPEED); 176 trace_sdhci_capareg("high speed", val); 177 msk = FIELD_DP64(msk, SDHC_CAPAB, HIGHSPEED, 0); 178 179 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SDMA); 180 trace_sdhci_capareg("SDMA", val); 181 msk = FIELD_DP64(msk, SDHC_CAPAB, SDMA, 0); 182 183 val = FIELD_EX64(s->capareg, SDHC_CAPAB, SUSPRESUME); 184 trace_sdhci_capareg("suspend/resume", val); 185 msk = FIELD_DP64(msk, SDHC_CAPAB, SUSPRESUME, 0); 186 187 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V33); 188 trace_sdhci_capareg("3.3v", val); 189 msk = FIELD_DP64(msk, SDHC_CAPAB, V33, 0); 190 191 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V30); 192 trace_sdhci_capareg("3.0v", val); 193 msk = FIELD_DP64(msk, SDHC_CAPAB, V30, 0); 194 195 val = FIELD_EX64(s->capareg, SDHC_CAPAB, V18); 196 trace_sdhci_capareg("1.8v", val); 197 msk = FIELD_DP64(msk, SDHC_CAPAB, V18, 0); 198 break; 199 200 default: 201 error_setg(errp, "Unsupported spec version: %u", s->sd_spec_version); 202 } 203 if (msk) { 204 qemu_log_mask(LOG_UNIMP, 205 "SDHCI: unknown CAPAB mask: 0x%016" PRIx64 "\n", msk); 206 } 207 } 208 209 static uint8_t sdhci_slotint(SDHCIState *s) 210 { 211 return (s->norintsts & s->norintsigen) || (s->errintsts & s->errintsigen) || 212 ((s->norintsts & SDHC_NIS_INSERT) && (s->wakcon & SDHC_WKUP_ON_INS)) || 213 ((s->norintsts & SDHC_NIS_REMOVE) && (s->wakcon & SDHC_WKUP_ON_RMV)); 214 } 215 216 static inline void sdhci_update_irq(SDHCIState *s) 217 { 218 qemu_set_irq(s->irq, sdhci_slotint(s)); 219 } 220 221 static void sdhci_raise_insertion_irq(void *opaque) 222 { 223 SDHCIState *s = (SDHCIState *)opaque; 224 225 if (s->norintsts & SDHC_NIS_REMOVE) { 226 timer_mod(s->insert_timer, 227 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); 228 } else { 229 s->prnsts = 0x1ff0000; 230 if (s->norintstsen & SDHC_NISEN_INSERT) { 231 s->norintsts |= SDHC_NIS_INSERT; 232 } 233 sdhci_update_irq(s); 234 } 235 } 236 237 static void sdhci_set_inserted(DeviceState *dev, bool level) 238 { 239 SDHCIState *s = (SDHCIState *)dev; 240 241 trace_sdhci_set_inserted(level ? "insert" : "eject"); 242 if ((s->norintsts & SDHC_NIS_REMOVE) && level) { 243 /* Give target some time to notice card ejection */ 244 timer_mod(s->insert_timer, 245 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_INSERTION_DELAY); 246 } else { 247 if (level) { 248 s->prnsts = 0x1ff0000; 249 if (s->norintstsen & SDHC_NISEN_INSERT) { 250 s->norintsts |= SDHC_NIS_INSERT; 251 } 252 } else { 253 s->prnsts = 0x1fa0000; 254 s->pwrcon &= ~SDHC_POWER_ON; 255 s->clkcon &= ~SDHC_CLOCK_SDCLK_EN; 256 if (s->norintstsen & SDHC_NISEN_REMOVE) { 257 s->norintsts |= SDHC_NIS_REMOVE; 258 } 259 } 260 sdhci_update_irq(s); 261 } 262 } 263 264 static void sdhci_set_readonly(DeviceState *dev, bool level) 265 { 266 SDHCIState *s = (SDHCIState *)dev; 267 268 if (level) { 269 s->prnsts &= ~SDHC_WRITE_PROTECT; 270 } else { 271 /* Write enabled */ 272 s->prnsts |= SDHC_WRITE_PROTECT; 273 } 274 } 275 276 static void sdhci_reset(SDHCIState *s) 277 { 278 DeviceState *dev = DEVICE(s); 279 280 timer_del(s->insert_timer); 281 timer_del(s->transfer_timer); 282 283 /* Set all registers to 0. Capabilities/Version registers are not cleared 284 * and assumed to always preserve their value, given to them during 285 * initialization */ 286 memset(&s->sdmasysad, 0, (uintptr_t)&s->capareg - (uintptr_t)&s->sdmasysad); 287 288 /* Reset other state based on current card insertion/readonly status */ 289 sdhci_set_inserted(dev, sdbus_get_inserted(&s->sdbus)); 290 sdhci_set_readonly(dev, sdbus_get_readonly(&s->sdbus)); 291 292 s->data_count = 0; 293 s->stopped_state = sdhc_not_stopped; 294 s->pending_insert_state = false; 295 } 296 297 static void sdhci_poweron_reset(DeviceState *dev) 298 { 299 /* QOM (ie power-on) reset. This is identical to reset 300 * commanded via device register apart from handling of the 301 * 'pending insert on powerup' quirk. 302 */ 303 SDHCIState *s = (SDHCIState *)dev; 304 305 sdhci_reset(s); 306 307 if (s->pending_insert_quirk) { 308 s->pending_insert_state = true; 309 } 310 } 311 312 static void sdhci_data_transfer(void *opaque); 313 314 static void sdhci_send_command(SDHCIState *s) 315 { 316 SDRequest request; 317 uint8_t response[16]; 318 int rlen; 319 320 s->errintsts = 0; 321 s->acmd12errsts = 0; 322 request.cmd = s->cmdreg >> 8; 323 request.arg = s->argument; 324 325 trace_sdhci_send_command(request.cmd, request.arg); 326 rlen = sdbus_do_command(&s->sdbus, &request, response); 327 328 if (s->cmdreg & SDHC_CMD_RESPONSE) { 329 if (rlen == 4) { 330 s->rspreg[0] = ldl_be_p(response); 331 s->rspreg[1] = s->rspreg[2] = s->rspreg[3] = 0; 332 trace_sdhci_response4(s->rspreg[0]); 333 } else if (rlen == 16) { 334 s->rspreg[0] = ldl_be_p(&response[11]); 335 s->rspreg[1] = ldl_be_p(&response[7]); 336 s->rspreg[2] = ldl_be_p(&response[3]); 337 s->rspreg[3] = (response[0] << 16) | (response[1] << 8) | 338 response[2]; 339 trace_sdhci_response16(s->rspreg[3], s->rspreg[2], 340 s->rspreg[1], s->rspreg[0]); 341 } else { 342 trace_sdhci_error("timeout waiting for command response"); 343 if (s->errintstsen & SDHC_EISEN_CMDTIMEOUT) { 344 s->errintsts |= SDHC_EIS_CMDTIMEOUT; 345 s->norintsts |= SDHC_NIS_ERR; 346 } 347 } 348 349 if (!(s->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && 350 (s->norintstsen & SDHC_NISEN_TRSCMP) && 351 (s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY) { 352 s->norintsts |= SDHC_NIS_TRSCMP; 353 } 354 } 355 356 if (s->norintstsen & SDHC_NISEN_CMDCMP) { 357 s->norintsts |= SDHC_NIS_CMDCMP; 358 } 359 360 sdhci_update_irq(s); 361 362 if (s->blksize && (s->cmdreg & SDHC_CMD_DATA_PRESENT)) { 363 s->data_count = 0; 364 sdhci_data_transfer(s); 365 } 366 } 367 368 static void sdhci_end_transfer(SDHCIState *s) 369 { 370 /* Automatically send CMD12 to stop transfer if AutoCMD12 enabled */ 371 if ((s->trnmod & SDHC_TRNS_ACMD12) != 0) { 372 SDRequest request; 373 uint8_t response[16]; 374 375 request.cmd = 0x0C; 376 request.arg = 0; 377 trace_sdhci_end_transfer(request.cmd, request.arg); 378 sdbus_do_command(&s->sdbus, &request, response); 379 /* Auto CMD12 response goes to the upper Response register */ 380 s->rspreg[3] = ldl_be_p(response); 381 } 382 383 s->prnsts &= ~(SDHC_DOING_READ | SDHC_DOING_WRITE | 384 SDHC_DAT_LINE_ACTIVE | SDHC_DATA_INHIBIT | 385 SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE); 386 387 if (s->norintstsen & SDHC_NISEN_TRSCMP) { 388 s->norintsts |= SDHC_NIS_TRSCMP; 389 } 390 391 sdhci_update_irq(s); 392 } 393 394 /* 395 * Programmed i/o data transfer 396 */ 397 #define BLOCK_SIZE_MASK (4 * KiB - 1) 398 399 /* Fill host controller's read buffer with BLKSIZE bytes of data from card */ 400 static void sdhci_read_block_from_card(SDHCIState *s) 401 { 402 int index = 0; 403 uint8_t data; 404 const uint16_t blk_size = s->blksize & BLOCK_SIZE_MASK; 405 406 if ((s->trnmod & SDHC_TRNS_MULTI) && 407 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) { 408 return; 409 } 410 411 for (index = 0; index < blk_size; index++) { 412 data = sdbus_read_data(&s->sdbus); 413 if (!FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) { 414 /* Device is not in tuning */ 415 s->fifo_buffer[index] = data; 416 } 417 } 418 419 if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, EXECUTE_TUNING)) { 420 /* Device is in tuning */ 421 s->hostctl2 &= ~R_SDHC_HOSTCTL2_EXECUTE_TUNING_MASK; 422 s->hostctl2 |= R_SDHC_HOSTCTL2_SAMPLING_CLKSEL_MASK; 423 s->prnsts &= ~(SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ | 424 SDHC_DATA_INHIBIT); 425 goto read_done; 426 } 427 428 /* New data now available for READ through Buffer Port Register */ 429 s->prnsts |= SDHC_DATA_AVAILABLE; 430 if (s->norintstsen & SDHC_NISEN_RBUFRDY) { 431 s->norintsts |= SDHC_NIS_RBUFRDY; 432 } 433 434 /* Clear DAT line active status if that was the last block */ 435 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 436 ((s->trnmod & SDHC_TRNS_MULTI) && s->blkcnt == 1)) { 437 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; 438 } 439 440 /* If stop at block gap request was set and it's not the last block of 441 * data - generate Block Event interrupt */ 442 if (s->stopped_state == sdhc_gap_read && (s->trnmod & SDHC_TRNS_MULTI) && 443 s->blkcnt != 1) { 444 s->prnsts &= ~SDHC_DAT_LINE_ACTIVE; 445 if (s->norintstsen & SDHC_EISEN_BLKGAP) { 446 s->norintsts |= SDHC_EIS_BLKGAP; 447 } 448 } 449 450 read_done: 451 sdhci_update_irq(s); 452 } 453 454 /* Read @size byte of data from host controller @s BUFFER DATA PORT register */ 455 static uint32_t sdhci_read_dataport(SDHCIState *s, unsigned size) 456 { 457 uint32_t value = 0; 458 int i; 459 460 /* first check that a valid data exists in host controller input buffer */ 461 if ((s->prnsts & SDHC_DATA_AVAILABLE) == 0) { 462 trace_sdhci_error("read from empty buffer"); 463 return 0; 464 } 465 466 for (i = 0; i < size; i++) { 467 value |= s->fifo_buffer[s->data_count] << i * 8; 468 s->data_count++; 469 /* check if we've read all valid data (blksize bytes) from buffer */ 470 if ((s->data_count) >= (s->blksize & BLOCK_SIZE_MASK)) { 471 trace_sdhci_read_dataport(s->data_count); 472 s->prnsts &= ~SDHC_DATA_AVAILABLE; /* no more data in a buffer */ 473 s->data_count = 0; /* next buff read must start at position [0] */ 474 475 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 476 s->blkcnt--; 477 } 478 479 /* if that was the last block of data */ 480 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 481 ((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0)) || 482 /* stop at gap request */ 483 (s->stopped_state == sdhc_gap_read && 484 !(s->prnsts & SDHC_DAT_LINE_ACTIVE))) { 485 sdhci_end_transfer(s); 486 } else { /* if there are more data, read next block from card */ 487 sdhci_read_block_from_card(s); 488 } 489 break; 490 } 491 } 492 493 return value; 494 } 495 496 /* Write data from host controller FIFO to card */ 497 static void sdhci_write_block_to_card(SDHCIState *s) 498 { 499 int index = 0; 500 501 if (s->prnsts & SDHC_SPACE_AVAILABLE) { 502 if (s->norintstsen & SDHC_NISEN_WBUFRDY) { 503 s->norintsts |= SDHC_NIS_WBUFRDY; 504 } 505 sdhci_update_irq(s); 506 return; 507 } 508 509 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 510 if (s->blkcnt == 0) { 511 return; 512 } else { 513 s->blkcnt--; 514 } 515 } 516 517 for (index = 0; index < (s->blksize & BLOCK_SIZE_MASK); index++) { 518 sdbus_write_data(&s->sdbus, s->fifo_buffer[index]); 519 } 520 521 /* Next data can be written through BUFFER DATORT register */ 522 s->prnsts |= SDHC_SPACE_AVAILABLE; 523 524 /* Finish transfer if that was the last block of data */ 525 if ((s->trnmod & SDHC_TRNS_MULTI) == 0 || 526 ((s->trnmod & SDHC_TRNS_MULTI) && 527 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && (s->blkcnt == 0))) { 528 sdhci_end_transfer(s); 529 } else if (s->norintstsen & SDHC_NISEN_WBUFRDY) { 530 s->norintsts |= SDHC_NIS_WBUFRDY; 531 } 532 533 /* Generate Block Gap Event if requested and if not the last block */ 534 if (s->stopped_state == sdhc_gap_write && (s->trnmod & SDHC_TRNS_MULTI) && 535 s->blkcnt > 0) { 536 s->prnsts &= ~SDHC_DOING_WRITE; 537 if (s->norintstsen & SDHC_EISEN_BLKGAP) { 538 s->norintsts |= SDHC_EIS_BLKGAP; 539 } 540 sdhci_end_transfer(s); 541 } 542 543 sdhci_update_irq(s); 544 } 545 546 /* Write @size bytes of @value data to host controller @s Buffer Data Port 547 * register */ 548 static void sdhci_write_dataport(SDHCIState *s, uint32_t value, unsigned size) 549 { 550 unsigned i; 551 552 /* Check that there is free space left in a buffer */ 553 if (!(s->prnsts & SDHC_SPACE_AVAILABLE)) { 554 trace_sdhci_error("Can't write to data buffer: buffer full"); 555 return; 556 } 557 558 for (i = 0; i < size; i++) { 559 s->fifo_buffer[s->data_count] = value & 0xFF; 560 s->data_count++; 561 value >>= 8; 562 if (s->data_count >= (s->blksize & BLOCK_SIZE_MASK)) { 563 trace_sdhci_write_dataport(s->data_count); 564 s->data_count = 0; 565 s->prnsts &= ~SDHC_SPACE_AVAILABLE; 566 if (s->prnsts & SDHC_DOING_WRITE) { 567 sdhci_write_block_to_card(s); 568 } 569 } 570 } 571 } 572 573 /* 574 * Single DMA data transfer 575 */ 576 577 /* Multi block SDMA transfer */ 578 static void sdhci_sdma_transfer_multi_blocks(SDHCIState *s) 579 { 580 bool page_aligned = false; 581 unsigned int n, begin; 582 const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK; 583 uint32_t boundary_chk = 1 << (((s->blksize & ~BLOCK_SIZE_MASK) >> 12) + 12); 584 uint32_t boundary_count = boundary_chk - (s->sdmasysad % boundary_chk); 585 586 if (!(s->trnmod & SDHC_TRNS_BLK_CNT_EN) || !s->blkcnt) { 587 qemu_log_mask(LOG_UNIMP, "infinite transfer is not supported\n"); 588 return; 589 } 590 591 /* XXX: Some sd/mmc drivers (for example, u-boot-slp) do not account for 592 * possible stop at page boundary if initial address is not page aligned, 593 * allow them to work properly */ 594 if ((s->sdmasysad % boundary_chk) == 0) { 595 page_aligned = true; 596 } 597 598 if (s->trnmod & SDHC_TRNS_READ) { 599 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | 600 SDHC_DAT_LINE_ACTIVE; 601 while (s->blkcnt) { 602 if (s->data_count == 0) { 603 for (n = 0; n < block_size; n++) { 604 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 605 } 606 } 607 begin = s->data_count; 608 if (((boundary_count + begin) < block_size) && page_aligned) { 609 s->data_count = boundary_count + begin; 610 boundary_count = 0; 611 } else { 612 s->data_count = block_size; 613 boundary_count -= block_size - begin; 614 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 615 s->blkcnt--; 616 } 617 } 618 dma_memory_write(s->dma_as, s->sdmasysad, 619 &s->fifo_buffer[begin], s->data_count - begin); 620 s->sdmasysad += s->data_count - begin; 621 if (s->data_count == block_size) { 622 s->data_count = 0; 623 } 624 if (page_aligned && boundary_count == 0) { 625 break; 626 } 627 } 628 } else { 629 s->prnsts |= SDHC_DOING_WRITE | SDHC_DATA_INHIBIT | 630 SDHC_DAT_LINE_ACTIVE; 631 while (s->blkcnt) { 632 begin = s->data_count; 633 if (((boundary_count + begin) < block_size) && page_aligned) { 634 s->data_count = boundary_count + begin; 635 boundary_count = 0; 636 } else { 637 s->data_count = block_size; 638 boundary_count -= block_size - begin; 639 } 640 dma_memory_read(s->dma_as, s->sdmasysad, 641 &s->fifo_buffer[begin], s->data_count - begin); 642 s->sdmasysad += s->data_count - begin; 643 if (s->data_count == block_size) { 644 for (n = 0; n < block_size; n++) { 645 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 646 } 647 s->data_count = 0; 648 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 649 s->blkcnt--; 650 } 651 } 652 if (page_aligned && boundary_count == 0) { 653 break; 654 } 655 } 656 } 657 658 if (s->blkcnt == 0) { 659 sdhci_end_transfer(s); 660 } else { 661 if (s->norintstsen & SDHC_NISEN_DMA) { 662 s->norintsts |= SDHC_NIS_DMA; 663 } 664 sdhci_update_irq(s); 665 } 666 } 667 668 /* single block SDMA transfer */ 669 static void sdhci_sdma_transfer_single_block(SDHCIState *s) 670 { 671 int n; 672 uint32_t datacnt = s->blksize & BLOCK_SIZE_MASK; 673 674 if (s->trnmod & SDHC_TRNS_READ) { 675 for (n = 0; n < datacnt; n++) { 676 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 677 } 678 dma_memory_write(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt); 679 } else { 680 dma_memory_read(s->dma_as, s->sdmasysad, s->fifo_buffer, datacnt); 681 for (n = 0; n < datacnt; n++) { 682 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 683 } 684 } 685 s->blkcnt--; 686 687 sdhci_end_transfer(s); 688 } 689 690 typedef struct ADMADescr { 691 hwaddr addr; 692 uint16_t length; 693 uint8_t attr; 694 uint8_t incr; 695 } ADMADescr; 696 697 static void get_adma_description(SDHCIState *s, ADMADescr *dscr) 698 { 699 uint32_t adma1 = 0; 700 uint64_t adma2 = 0; 701 hwaddr entry_addr = (hwaddr)s->admasysaddr; 702 switch (SDHC_DMA_TYPE(s->hostctl1)) { 703 case SDHC_CTRL_ADMA2_32: 704 dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma2, 705 sizeof(adma2)); 706 adma2 = le64_to_cpu(adma2); 707 /* The spec does not specify endianness of descriptor table. 708 * We currently assume that it is LE. 709 */ 710 dscr->addr = (hwaddr)extract64(adma2, 32, 32) & ~0x3ull; 711 dscr->length = (uint16_t)extract64(adma2, 16, 16); 712 dscr->attr = (uint8_t)extract64(adma2, 0, 7); 713 dscr->incr = 8; 714 break; 715 case SDHC_CTRL_ADMA1_32: 716 dma_memory_read(s->dma_as, entry_addr, (uint8_t *)&adma1, 717 sizeof(adma1)); 718 adma1 = le32_to_cpu(adma1); 719 dscr->addr = (hwaddr)(adma1 & 0xFFFFF000); 720 dscr->attr = (uint8_t)extract32(adma1, 0, 7); 721 dscr->incr = 4; 722 if ((dscr->attr & SDHC_ADMA_ATTR_ACT_MASK) == SDHC_ADMA_ATTR_SET_LEN) { 723 dscr->length = (uint16_t)extract32(adma1, 12, 16); 724 } else { 725 dscr->length = 4 * KiB; 726 } 727 break; 728 case SDHC_CTRL_ADMA2_64: 729 dma_memory_read(s->dma_as, entry_addr, 730 (uint8_t *)(&dscr->attr), 1); 731 dma_memory_read(s->dma_as, entry_addr + 2, 732 (uint8_t *)(&dscr->length), 2); 733 dscr->length = le16_to_cpu(dscr->length); 734 dma_memory_read(s->dma_as, entry_addr + 4, 735 (uint8_t *)(&dscr->addr), 8); 736 dscr->addr = le64_to_cpu(dscr->addr); 737 dscr->attr &= (uint8_t) ~0xC0; 738 dscr->incr = 12; 739 break; 740 } 741 } 742 743 /* Advanced DMA data transfer */ 744 745 static void sdhci_do_adma(SDHCIState *s) 746 { 747 unsigned int n, begin, length; 748 const uint16_t block_size = s->blksize & BLOCK_SIZE_MASK; 749 ADMADescr dscr = {}; 750 int i; 751 752 for (i = 0; i < SDHC_ADMA_DESCS_PER_DELAY; ++i) { 753 s->admaerr &= ~SDHC_ADMAERR_LENGTH_MISMATCH; 754 755 get_adma_description(s, &dscr); 756 trace_sdhci_adma_loop(dscr.addr, dscr.length, dscr.attr); 757 758 if ((dscr.attr & SDHC_ADMA_ATTR_VALID) == 0) { 759 /* Indicate that error occurred in ST_FDS state */ 760 s->admaerr &= ~SDHC_ADMAERR_STATE_MASK; 761 s->admaerr |= SDHC_ADMAERR_STATE_ST_FDS; 762 763 /* Generate ADMA error interrupt */ 764 if (s->errintstsen & SDHC_EISEN_ADMAERR) { 765 s->errintsts |= SDHC_EIS_ADMAERR; 766 s->norintsts |= SDHC_NIS_ERR; 767 } 768 769 sdhci_update_irq(s); 770 return; 771 } 772 773 length = dscr.length ? dscr.length : 64 * KiB; 774 775 switch (dscr.attr & SDHC_ADMA_ATTR_ACT_MASK) { 776 case SDHC_ADMA_ATTR_ACT_TRAN: /* data transfer */ 777 778 if (s->trnmod & SDHC_TRNS_READ) { 779 while (length) { 780 if (s->data_count == 0) { 781 for (n = 0; n < block_size; n++) { 782 s->fifo_buffer[n] = sdbus_read_data(&s->sdbus); 783 } 784 } 785 begin = s->data_count; 786 if ((length + begin) < block_size) { 787 s->data_count = length + begin; 788 length = 0; 789 } else { 790 s->data_count = block_size; 791 length -= block_size - begin; 792 } 793 dma_memory_write(s->dma_as, dscr.addr, 794 &s->fifo_buffer[begin], 795 s->data_count - begin); 796 dscr.addr += s->data_count - begin; 797 if (s->data_count == block_size) { 798 s->data_count = 0; 799 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 800 s->blkcnt--; 801 if (s->blkcnt == 0) { 802 break; 803 } 804 } 805 } 806 } 807 } else { 808 while (length) { 809 begin = s->data_count; 810 if ((length + begin) < block_size) { 811 s->data_count = length + begin; 812 length = 0; 813 } else { 814 s->data_count = block_size; 815 length -= block_size - begin; 816 } 817 dma_memory_read(s->dma_as, dscr.addr, 818 &s->fifo_buffer[begin], 819 s->data_count - begin); 820 dscr.addr += s->data_count - begin; 821 if (s->data_count == block_size) { 822 for (n = 0; n < block_size; n++) { 823 sdbus_write_data(&s->sdbus, s->fifo_buffer[n]); 824 } 825 s->data_count = 0; 826 if (s->trnmod & SDHC_TRNS_BLK_CNT_EN) { 827 s->blkcnt--; 828 if (s->blkcnt == 0) { 829 break; 830 } 831 } 832 } 833 } 834 } 835 s->admasysaddr += dscr.incr; 836 break; 837 case SDHC_ADMA_ATTR_ACT_LINK: /* link to next descriptor table */ 838 s->admasysaddr = dscr.addr; 839 trace_sdhci_adma("link", s->admasysaddr); 840 break; 841 default: 842 s->admasysaddr += dscr.incr; 843 break; 844 } 845 846 if (dscr.attr & SDHC_ADMA_ATTR_INT) { 847 trace_sdhci_adma("interrupt", s->admasysaddr); 848 if (s->norintstsen & SDHC_NISEN_DMA) { 849 s->norintsts |= SDHC_NIS_DMA; 850 } 851 852 sdhci_update_irq(s); 853 } 854 855 /* ADMA transfer terminates if blkcnt == 0 or by END attribute */ 856 if (((s->trnmod & SDHC_TRNS_BLK_CNT_EN) && 857 (s->blkcnt == 0)) || (dscr.attr & SDHC_ADMA_ATTR_END)) { 858 trace_sdhci_adma_transfer_completed(); 859 if (length || ((dscr.attr & SDHC_ADMA_ATTR_END) && 860 (s->trnmod & SDHC_TRNS_BLK_CNT_EN) && 861 s->blkcnt != 0)) { 862 trace_sdhci_error("SD/MMC host ADMA length mismatch"); 863 s->admaerr |= SDHC_ADMAERR_LENGTH_MISMATCH | 864 SDHC_ADMAERR_STATE_ST_TFR; 865 if (s->errintstsen & SDHC_EISEN_ADMAERR) { 866 trace_sdhci_error("Set ADMA error flag"); 867 s->errintsts |= SDHC_EIS_ADMAERR; 868 s->norintsts |= SDHC_NIS_ERR; 869 } 870 871 sdhci_update_irq(s); 872 } 873 sdhci_end_transfer(s); 874 return; 875 } 876 877 } 878 879 /* we have unfinished business - reschedule to continue ADMA */ 880 timer_mod(s->transfer_timer, 881 qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) + SDHC_TRANSFER_DELAY); 882 } 883 884 /* Perform data transfer according to controller configuration */ 885 886 static void sdhci_data_transfer(void *opaque) 887 { 888 SDHCIState *s = (SDHCIState *)opaque; 889 890 if (s->trnmod & SDHC_TRNS_DMA) { 891 switch (SDHC_DMA_TYPE(s->hostctl1)) { 892 case SDHC_CTRL_SDMA: 893 if ((s->blkcnt == 1) || !(s->trnmod & SDHC_TRNS_MULTI)) { 894 sdhci_sdma_transfer_single_block(s); 895 } else { 896 sdhci_sdma_transfer_multi_blocks(s); 897 } 898 899 break; 900 case SDHC_CTRL_ADMA1_32: 901 if (!(s->capareg & R_SDHC_CAPAB_ADMA1_MASK)) { 902 trace_sdhci_error("ADMA1 not supported"); 903 break; 904 } 905 906 sdhci_do_adma(s); 907 break; 908 case SDHC_CTRL_ADMA2_32: 909 if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK)) { 910 trace_sdhci_error("ADMA2 not supported"); 911 break; 912 } 913 914 sdhci_do_adma(s); 915 break; 916 case SDHC_CTRL_ADMA2_64: 917 if (!(s->capareg & R_SDHC_CAPAB_ADMA2_MASK) || 918 !(s->capareg & R_SDHC_CAPAB_BUS64BIT_MASK)) { 919 trace_sdhci_error("64 bit ADMA not supported"); 920 break; 921 } 922 923 sdhci_do_adma(s); 924 break; 925 default: 926 trace_sdhci_error("Unsupported DMA type"); 927 break; 928 } 929 } else { 930 if ((s->trnmod & SDHC_TRNS_READ) && sdbus_data_ready(&s->sdbus)) { 931 s->prnsts |= SDHC_DOING_READ | SDHC_DATA_INHIBIT | 932 SDHC_DAT_LINE_ACTIVE; 933 sdhci_read_block_from_card(s); 934 } else { 935 s->prnsts |= SDHC_DOING_WRITE | SDHC_DAT_LINE_ACTIVE | 936 SDHC_SPACE_AVAILABLE | SDHC_DATA_INHIBIT; 937 sdhci_write_block_to_card(s); 938 } 939 } 940 } 941 942 static bool sdhci_can_issue_command(SDHCIState *s) 943 { 944 if (!SDHC_CLOCK_IS_ON(s->clkcon) || 945 (((s->prnsts & SDHC_DATA_INHIBIT) || s->stopped_state) && 946 ((s->cmdreg & SDHC_CMD_DATA_PRESENT) || 947 ((s->cmdreg & SDHC_CMD_RESPONSE) == SDHC_CMD_RSP_WITH_BUSY && 948 !(SDHC_COMMAND_TYPE(s->cmdreg) == SDHC_CMD_ABORT))))) { 949 return false; 950 } 951 952 return true; 953 } 954 955 /* The Buffer Data Port register must be accessed in sequential and 956 * continuous manner */ 957 static inline bool 958 sdhci_buff_access_is_sequential(SDHCIState *s, unsigned byte_num) 959 { 960 if ((s->data_count & 0x3) != byte_num) { 961 trace_sdhci_error("Non-sequential access to Buffer Data Port register" 962 "is prohibited\n"); 963 return false; 964 } 965 return true; 966 } 967 968 static uint64_t sdhci_read(void *opaque, hwaddr offset, unsigned size) 969 { 970 SDHCIState *s = (SDHCIState *)opaque; 971 uint32_t ret = 0; 972 973 switch (offset & ~0x3) { 974 case SDHC_SYSAD: 975 ret = s->sdmasysad; 976 break; 977 case SDHC_BLKSIZE: 978 ret = s->blksize | (s->blkcnt << 16); 979 break; 980 case SDHC_ARGUMENT: 981 ret = s->argument; 982 break; 983 case SDHC_TRNMOD: 984 ret = s->trnmod | (s->cmdreg << 16); 985 break; 986 case SDHC_RSPREG0 ... SDHC_RSPREG3: 987 ret = s->rspreg[((offset & ~0x3) - SDHC_RSPREG0) >> 2]; 988 break; 989 case SDHC_BDATA: 990 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { 991 ret = sdhci_read_dataport(s, size); 992 trace_sdhci_access("rd", size << 3, offset, "->", ret, ret); 993 return ret; 994 } 995 break; 996 case SDHC_PRNSTS: 997 ret = s->prnsts; 998 ret = FIELD_DP32(ret, SDHC_PRNSTS, DAT_LVL, 999 sdbus_get_dat_lines(&s->sdbus)); 1000 ret = FIELD_DP32(ret, SDHC_PRNSTS, CMD_LVL, 1001 sdbus_get_cmd_line(&s->sdbus)); 1002 break; 1003 case SDHC_HOSTCTL: 1004 ret = s->hostctl1 | (s->pwrcon << 8) | (s->blkgap << 16) | 1005 (s->wakcon << 24); 1006 break; 1007 case SDHC_CLKCON: 1008 ret = s->clkcon | (s->timeoutcon << 16); 1009 break; 1010 case SDHC_NORINTSTS: 1011 ret = s->norintsts | (s->errintsts << 16); 1012 break; 1013 case SDHC_NORINTSTSEN: 1014 ret = s->norintstsen | (s->errintstsen << 16); 1015 break; 1016 case SDHC_NORINTSIGEN: 1017 ret = s->norintsigen | (s->errintsigen << 16); 1018 break; 1019 case SDHC_ACMD12ERRSTS: 1020 ret = s->acmd12errsts | (s->hostctl2 << 16); 1021 break; 1022 case SDHC_CAPAB: 1023 ret = (uint32_t)s->capareg; 1024 break; 1025 case SDHC_CAPAB + 4: 1026 ret = (uint32_t)(s->capareg >> 32); 1027 break; 1028 case SDHC_MAXCURR: 1029 ret = (uint32_t)s->maxcurr; 1030 break; 1031 case SDHC_MAXCURR + 4: 1032 ret = (uint32_t)(s->maxcurr >> 32); 1033 break; 1034 case SDHC_ADMAERR: 1035 ret = s->admaerr; 1036 break; 1037 case SDHC_ADMASYSADDR: 1038 ret = (uint32_t)s->admasysaddr; 1039 break; 1040 case SDHC_ADMASYSADDR + 4: 1041 ret = (uint32_t)(s->admasysaddr >> 32); 1042 break; 1043 case SDHC_SLOT_INT_STATUS: 1044 ret = (s->version << 16) | sdhci_slotint(s); 1045 break; 1046 default: 1047 qemu_log_mask(LOG_UNIMP, "SDHC rd_%ub @0x%02" HWADDR_PRIx " " 1048 "not implemented\n", size, offset); 1049 break; 1050 } 1051 1052 ret >>= (offset & 0x3) * 8; 1053 ret &= (1ULL << (size * 8)) - 1; 1054 trace_sdhci_access("rd", size << 3, offset, "->", ret, ret); 1055 return ret; 1056 } 1057 1058 static inline void sdhci_blkgap_write(SDHCIState *s, uint8_t value) 1059 { 1060 if ((value & SDHC_STOP_AT_GAP_REQ) && (s->blkgap & SDHC_STOP_AT_GAP_REQ)) { 1061 return; 1062 } 1063 s->blkgap = value & SDHC_STOP_AT_GAP_REQ; 1064 1065 if ((value & SDHC_CONTINUE_REQ) && s->stopped_state && 1066 (s->blkgap & SDHC_STOP_AT_GAP_REQ) == 0) { 1067 if (s->stopped_state == sdhc_gap_read) { 1068 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_READ; 1069 sdhci_read_block_from_card(s); 1070 } else { 1071 s->prnsts |= SDHC_DAT_LINE_ACTIVE | SDHC_DOING_WRITE; 1072 sdhci_write_block_to_card(s); 1073 } 1074 s->stopped_state = sdhc_not_stopped; 1075 } else if (!s->stopped_state && (value & SDHC_STOP_AT_GAP_REQ)) { 1076 if (s->prnsts & SDHC_DOING_READ) { 1077 s->stopped_state = sdhc_gap_read; 1078 } else if (s->prnsts & SDHC_DOING_WRITE) { 1079 s->stopped_state = sdhc_gap_write; 1080 } 1081 } 1082 } 1083 1084 static inline void sdhci_reset_write(SDHCIState *s, uint8_t value) 1085 { 1086 switch (value) { 1087 case SDHC_RESET_ALL: 1088 sdhci_reset(s); 1089 break; 1090 case SDHC_RESET_CMD: 1091 s->prnsts &= ~SDHC_CMD_INHIBIT; 1092 s->norintsts &= ~SDHC_NIS_CMDCMP; 1093 break; 1094 case SDHC_RESET_DATA: 1095 s->data_count = 0; 1096 s->prnsts &= ~(SDHC_SPACE_AVAILABLE | SDHC_DATA_AVAILABLE | 1097 SDHC_DOING_READ | SDHC_DOING_WRITE | 1098 SDHC_DATA_INHIBIT | SDHC_DAT_LINE_ACTIVE); 1099 s->blkgap &= ~(SDHC_STOP_AT_GAP_REQ | SDHC_CONTINUE_REQ); 1100 s->stopped_state = sdhc_not_stopped; 1101 s->norintsts &= ~(SDHC_NIS_WBUFRDY | SDHC_NIS_RBUFRDY | 1102 SDHC_NIS_DMA | SDHC_NIS_TRSCMP | SDHC_NIS_BLKGAP); 1103 break; 1104 } 1105 } 1106 1107 static void 1108 sdhci_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) 1109 { 1110 SDHCIState *s = (SDHCIState *)opaque; 1111 unsigned shift = 8 * (offset & 0x3); 1112 uint32_t mask = ~(((1ULL << (size * 8)) - 1) << shift); 1113 uint32_t value = val; 1114 value <<= shift; 1115 1116 switch (offset & ~0x3) { 1117 case SDHC_SYSAD: 1118 s->sdmasysad = (s->sdmasysad & mask) | value; 1119 MASKED_WRITE(s->sdmasysad, mask, value); 1120 /* Writing to last byte of sdmasysad might trigger transfer */ 1121 if (!(mask & 0xFF000000) && TRANSFERRING_DATA(s->prnsts) && s->blkcnt && 1122 s->blksize && SDHC_DMA_TYPE(s->hostctl1) == SDHC_CTRL_SDMA) { 1123 if (s->trnmod & SDHC_TRNS_MULTI) { 1124 sdhci_sdma_transfer_multi_blocks(s); 1125 } else { 1126 sdhci_sdma_transfer_single_block(s); 1127 } 1128 } 1129 break; 1130 case SDHC_BLKSIZE: 1131 if (!TRANSFERRING_DATA(s->prnsts)) { 1132 MASKED_WRITE(s->blksize, mask, value); 1133 MASKED_WRITE(s->blkcnt, mask >> 16, value >> 16); 1134 } 1135 1136 /* Limit block size to the maximum buffer size */ 1137 if (extract32(s->blksize, 0, 12) > s->buf_maxsz) { 1138 qemu_log_mask(LOG_GUEST_ERROR, "%s: Size 0x%x is larger than " \ 1139 "the maximum buffer 0x%x", __func__, s->blksize, 1140 s->buf_maxsz); 1141 1142 s->blksize = deposit32(s->blksize, 0, 12, s->buf_maxsz); 1143 } 1144 1145 break; 1146 case SDHC_ARGUMENT: 1147 MASKED_WRITE(s->argument, mask, value); 1148 break; 1149 case SDHC_TRNMOD: 1150 /* DMA can be enabled only if it is supported as indicated by 1151 * capabilities register */ 1152 if (!(s->capareg & R_SDHC_CAPAB_SDMA_MASK)) { 1153 value &= ~SDHC_TRNS_DMA; 1154 } 1155 MASKED_WRITE(s->trnmod, mask, value & SDHC_TRNMOD_MASK); 1156 MASKED_WRITE(s->cmdreg, mask >> 16, value >> 16); 1157 1158 /* Writing to the upper byte of CMDREG triggers SD command generation */ 1159 if ((mask & 0xFF000000) || !sdhci_can_issue_command(s)) { 1160 break; 1161 } 1162 1163 sdhci_send_command(s); 1164 break; 1165 case SDHC_BDATA: 1166 if (sdhci_buff_access_is_sequential(s, offset - SDHC_BDATA)) { 1167 sdhci_write_dataport(s, value >> shift, size); 1168 } 1169 break; 1170 case SDHC_HOSTCTL: 1171 if (!(mask & 0xFF0000)) { 1172 sdhci_blkgap_write(s, value >> 16); 1173 } 1174 MASKED_WRITE(s->hostctl1, mask, value); 1175 MASKED_WRITE(s->pwrcon, mask >> 8, value >> 8); 1176 MASKED_WRITE(s->wakcon, mask >> 24, value >> 24); 1177 if (!(s->prnsts & SDHC_CARD_PRESENT) || ((s->pwrcon >> 1) & 0x7) < 5 || 1178 !(s->capareg & (1 << (31 - ((s->pwrcon >> 1) & 0x7))))) { 1179 s->pwrcon &= ~SDHC_POWER_ON; 1180 } 1181 break; 1182 case SDHC_CLKCON: 1183 if (!(mask & 0xFF000000)) { 1184 sdhci_reset_write(s, value >> 24); 1185 } 1186 MASKED_WRITE(s->clkcon, mask, value); 1187 MASKED_WRITE(s->timeoutcon, mask >> 16, value >> 16); 1188 if (s->clkcon & SDHC_CLOCK_INT_EN) { 1189 s->clkcon |= SDHC_CLOCK_INT_STABLE; 1190 } else { 1191 s->clkcon &= ~SDHC_CLOCK_INT_STABLE; 1192 } 1193 break; 1194 case SDHC_NORINTSTS: 1195 if (s->norintstsen & SDHC_NISEN_CARDINT) { 1196 value &= ~SDHC_NIS_CARDINT; 1197 } 1198 s->norintsts &= mask | ~value; 1199 s->errintsts &= (mask >> 16) | ~(value >> 16); 1200 if (s->errintsts) { 1201 s->norintsts |= SDHC_NIS_ERR; 1202 } else { 1203 s->norintsts &= ~SDHC_NIS_ERR; 1204 } 1205 sdhci_update_irq(s); 1206 break; 1207 case SDHC_NORINTSTSEN: 1208 MASKED_WRITE(s->norintstsen, mask, value); 1209 MASKED_WRITE(s->errintstsen, mask >> 16, value >> 16); 1210 s->norintsts &= s->norintstsen; 1211 s->errintsts &= s->errintstsen; 1212 if (s->errintsts) { 1213 s->norintsts |= SDHC_NIS_ERR; 1214 } else { 1215 s->norintsts &= ~SDHC_NIS_ERR; 1216 } 1217 /* Quirk for Raspberry Pi: pending card insert interrupt 1218 * appears when first enabled after power on */ 1219 if ((s->norintstsen & SDHC_NISEN_INSERT) && s->pending_insert_state) { 1220 assert(s->pending_insert_quirk); 1221 s->norintsts |= SDHC_NIS_INSERT; 1222 s->pending_insert_state = false; 1223 } 1224 sdhci_update_irq(s); 1225 break; 1226 case SDHC_NORINTSIGEN: 1227 MASKED_WRITE(s->norintsigen, mask, value); 1228 MASKED_WRITE(s->errintsigen, mask >> 16, value >> 16); 1229 sdhci_update_irq(s); 1230 break; 1231 case SDHC_ADMAERR: 1232 MASKED_WRITE(s->admaerr, mask, value); 1233 break; 1234 case SDHC_ADMASYSADDR: 1235 s->admasysaddr = (s->admasysaddr & (0xFFFFFFFF00000000ULL | 1236 (uint64_t)mask)) | (uint64_t)value; 1237 break; 1238 case SDHC_ADMASYSADDR + 4: 1239 s->admasysaddr = (s->admasysaddr & (0x00000000FFFFFFFFULL | 1240 ((uint64_t)mask << 32))) | ((uint64_t)value << 32); 1241 break; 1242 case SDHC_FEAER: 1243 s->acmd12errsts |= value; 1244 s->errintsts |= (value >> 16) & s->errintstsen; 1245 if (s->acmd12errsts) { 1246 s->errintsts |= SDHC_EIS_CMD12ERR; 1247 } 1248 if (s->errintsts) { 1249 s->norintsts |= SDHC_NIS_ERR; 1250 } 1251 sdhci_update_irq(s); 1252 break; 1253 case SDHC_ACMD12ERRSTS: 1254 MASKED_WRITE(s->acmd12errsts, mask, value & UINT16_MAX); 1255 if (s->uhs_mode >= UHS_I) { 1256 MASKED_WRITE(s->hostctl2, mask >> 16, value >> 16); 1257 1258 if (FIELD_EX32(s->hostctl2, SDHC_HOSTCTL2, V18_ENA)) { 1259 sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_1_8V); 1260 } else { 1261 sdbus_set_voltage(&s->sdbus, SD_VOLTAGE_3_3V); 1262 } 1263 } 1264 break; 1265 1266 case SDHC_CAPAB: 1267 case SDHC_CAPAB + 4: 1268 case SDHC_MAXCURR: 1269 case SDHC_MAXCURR + 4: 1270 qemu_log_mask(LOG_GUEST_ERROR, "SDHC wr_%ub @0x%02" HWADDR_PRIx 1271 " <- 0x%08x read-only\n", size, offset, value >> shift); 1272 break; 1273 1274 default: 1275 qemu_log_mask(LOG_UNIMP, "SDHC wr_%ub @0x%02" HWADDR_PRIx " <- 0x%08x " 1276 "not implemented\n", size, offset, value >> shift); 1277 break; 1278 } 1279 trace_sdhci_access("wr", size << 3, offset, "<-", 1280 value >> shift, value >> shift); 1281 } 1282 1283 static const MemoryRegionOps sdhci_mmio_ops = { 1284 .read = sdhci_read, 1285 .write = sdhci_write, 1286 .valid = { 1287 .min_access_size = 1, 1288 .max_access_size = 4, 1289 .unaligned = false 1290 }, 1291 .endianness = DEVICE_LITTLE_ENDIAN, 1292 }; 1293 1294 static void sdhci_init_readonly_registers(SDHCIState *s, Error **errp) 1295 { 1296 Error *local_err = NULL; 1297 1298 switch (s->sd_spec_version) { 1299 case 2 ... 3: 1300 break; 1301 default: 1302 error_setg(errp, "Only Spec v2/v3 are supported"); 1303 return; 1304 } 1305 s->version = (SDHC_HCVER_VENDOR << 8) | (s->sd_spec_version - 1); 1306 1307 sdhci_check_capareg(s, &local_err); 1308 if (local_err) { 1309 error_propagate(errp, local_err); 1310 return; 1311 } 1312 } 1313 1314 /* --- qdev common --- */ 1315 1316 void sdhci_initfn(SDHCIState *s) 1317 { 1318 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), 1319 TYPE_SDHCI_BUS, DEVICE(s), "sd-bus"); 1320 1321 s->insert_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_raise_insertion_irq, s); 1322 s->transfer_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sdhci_data_transfer, s); 1323 1324 s->io_ops = &sdhci_mmio_ops; 1325 } 1326 1327 void sdhci_uninitfn(SDHCIState *s) 1328 { 1329 timer_del(s->insert_timer); 1330 timer_free(s->insert_timer); 1331 timer_del(s->transfer_timer); 1332 timer_free(s->transfer_timer); 1333 1334 g_free(s->fifo_buffer); 1335 s->fifo_buffer = NULL; 1336 } 1337 1338 void sdhci_common_realize(SDHCIState *s, Error **errp) 1339 { 1340 Error *local_err = NULL; 1341 1342 sdhci_init_readonly_registers(s, &local_err); 1343 if (local_err) { 1344 error_propagate(errp, local_err); 1345 return; 1346 } 1347 s->buf_maxsz = sdhci_get_fifolen(s); 1348 s->fifo_buffer = g_malloc0(s->buf_maxsz); 1349 1350 memory_region_init_io(&s->iomem, OBJECT(s), s->io_ops, s, "sdhci", 1351 SDHC_REGISTERS_MAP_SIZE); 1352 } 1353 1354 void sdhci_common_unrealize(SDHCIState *s, Error **errp) 1355 { 1356 /* This function is expected to be called only once for each class: 1357 * - SysBus: via DeviceClass->unrealize(), 1358 * - PCI: via PCIDeviceClass->exit(). 1359 * However to avoid double-free and/or use-after-free we still nullify 1360 * this variable (better safe than sorry!). */ 1361 g_free(s->fifo_buffer); 1362 s->fifo_buffer = NULL; 1363 } 1364 1365 static bool sdhci_pending_insert_vmstate_needed(void *opaque) 1366 { 1367 SDHCIState *s = opaque; 1368 1369 return s->pending_insert_state; 1370 } 1371 1372 static const VMStateDescription sdhci_pending_insert_vmstate = { 1373 .name = "sdhci/pending-insert", 1374 .version_id = 1, 1375 .minimum_version_id = 1, 1376 .needed = sdhci_pending_insert_vmstate_needed, 1377 .fields = (VMStateField[]) { 1378 VMSTATE_BOOL(pending_insert_state, SDHCIState), 1379 VMSTATE_END_OF_LIST() 1380 }, 1381 }; 1382 1383 const VMStateDescription sdhci_vmstate = { 1384 .name = "sdhci", 1385 .version_id = 1, 1386 .minimum_version_id = 1, 1387 .fields = (VMStateField[]) { 1388 VMSTATE_UINT32(sdmasysad, SDHCIState), 1389 VMSTATE_UINT16(blksize, SDHCIState), 1390 VMSTATE_UINT16(blkcnt, SDHCIState), 1391 VMSTATE_UINT32(argument, SDHCIState), 1392 VMSTATE_UINT16(trnmod, SDHCIState), 1393 VMSTATE_UINT16(cmdreg, SDHCIState), 1394 VMSTATE_UINT32_ARRAY(rspreg, SDHCIState, 4), 1395 VMSTATE_UINT32(prnsts, SDHCIState), 1396 VMSTATE_UINT8(hostctl1, SDHCIState), 1397 VMSTATE_UINT8(pwrcon, SDHCIState), 1398 VMSTATE_UINT8(blkgap, SDHCIState), 1399 VMSTATE_UINT8(wakcon, SDHCIState), 1400 VMSTATE_UINT16(clkcon, SDHCIState), 1401 VMSTATE_UINT8(timeoutcon, SDHCIState), 1402 VMSTATE_UINT8(admaerr, SDHCIState), 1403 VMSTATE_UINT16(norintsts, SDHCIState), 1404 VMSTATE_UINT16(errintsts, SDHCIState), 1405 VMSTATE_UINT16(norintstsen, SDHCIState), 1406 VMSTATE_UINT16(errintstsen, SDHCIState), 1407 VMSTATE_UINT16(norintsigen, SDHCIState), 1408 VMSTATE_UINT16(errintsigen, SDHCIState), 1409 VMSTATE_UINT16(acmd12errsts, SDHCIState), 1410 VMSTATE_UINT16(data_count, SDHCIState), 1411 VMSTATE_UINT64(admasysaddr, SDHCIState), 1412 VMSTATE_UINT8(stopped_state, SDHCIState), 1413 VMSTATE_VBUFFER_UINT32(fifo_buffer, SDHCIState, 1, NULL, buf_maxsz), 1414 VMSTATE_TIMER_PTR(insert_timer, SDHCIState), 1415 VMSTATE_TIMER_PTR(transfer_timer, SDHCIState), 1416 VMSTATE_END_OF_LIST() 1417 }, 1418 .subsections = (const VMStateDescription*[]) { 1419 &sdhci_pending_insert_vmstate, 1420 NULL 1421 }, 1422 }; 1423 1424 void sdhci_common_class_init(ObjectClass *klass, void *data) 1425 { 1426 DeviceClass *dc = DEVICE_CLASS(klass); 1427 1428 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 1429 dc->vmsd = &sdhci_vmstate; 1430 dc->reset = sdhci_poweron_reset; 1431 } 1432 1433 /* --- qdev SysBus --- */ 1434 1435 static Property sdhci_sysbus_properties[] = { 1436 DEFINE_SDHCI_COMMON_PROPERTIES(SDHCIState), 1437 DEFINE_PROP_BOOL("pending-insert-quirk", SDHCIState, pending_insert_quirk, 1438 false), 1439 DEFINE_PROP_LINK("dma", SDHCIState, 1440 dma_mr, TYPE_MEMORY_REGION, MemoryRegion *), 1441 DEFINE_PROP_END_OF_LIST(), 1442 }; 1443 1444 static void sdhci_sysbus_init(Object *obj) 1445 { 1446 SDHCIState *s = SYSBUS_SDHCI(obj); 1447 1448 sdhci_initfn(s); 1449 } 1450 1451 static void sdhci_sysbus_finalize(Object *obj) 1452 { 1453 SDHCIState *s = SYSBUS_SDHCI(obj); 1454 1455 if (s->dma_mr) { 1456 object_unparent(OBJECT(s->dma_mr)); 1457 } 1458 1459 sdhci_uninitfn(s); 1460 } 1461 1462 static void sdhci_sysbus_realize(DeviceState *dev, Error **errp) 1463 { 1464 SDHCIState *s = SYSBUS_SDHCI(dev); 1465 SysBusDevice *sbd = SYS_BUS_DEVICE(dev); 1466 Error *local_err = NULL; 1467 1468 sdhci_common_realize(s, &local_err); 1469 if (local_err) { 1470 error_propagate(errp, local_err); 1471 return; 1472 } 1473 1474 if (s->dma_mr) { 1475 s->dma_as = &s->sysbus_dma_as; 1476 address_space_init(s->dma_as, s->dma_mr, "sdhci-dma"); 1477 } else { 1478 /* use system_memory() if property "dma" not set */ 1479 s->dma_as = &address_space_memory; 1480 } 1481 1482 sysbus_init_irq(sbd, &s->irq); 1483 1484 sysbus_init_mmio(sbd, &s->iomem); 1485 } 1486 1487 static void sdhci_sysbus_unrealize(DeviceState *dev, Error **errp) 1488 { 1489 SDHCIState *s = SYSBUS_SDHCI(dev); 1490 1491 sdhci_common_unrealize(s, &error_abort); 1492 1493 if (s->dma_mr) { 1494 address_space_destroy(s->dma_as); 1495 } 1496 } 1497 1498 static void sdhci_sysbus_class_init(ObjectClass *klass, void *data) 1499 { 1500 DeviceClass *dc = DEVICE_CLASS(klass); 1501 1502 device_class_set_props(dc, sdhci_sysbus_properties); 1503 dc->realize = sdhci_sysbus_realize; 1504 dc->unrealize = sdhci_sysbus_unrealize; 1505 1506 sdhci_common_class_init(klass, data); 1507 } 1508 1509 static const TypeInfo sdhci_sysbus_info = { 1510 .name = TYPE_SYSBUS_SDHCI, 1511 .parent = TYPE_SYS_BUS_DEVICE, 1512 .instance_size = sizeof(SDHCIState), 1513 .instance_init = sdhci_sysbus_init, 1514 .instance_finalize = sdhci_sysbus_finalize, 1515 .class_init = sdhci_sysbus_class_init, 1516 }; 1517 1518 /* --- qdev bus master --- */ 1519 1520 static void sdhci_bus_class_init(ObjectClass *klass, void *data) 1521 { 1522 SDBusClass *sbc = SD_BUS_CLASS(klass); 1523 1524 sbc->set_inserted = sdhci_set_inserted; 1525 sbc->set_readonly = sdhci_set_readonly; 1526 } 1527 1528 static const TypeInfo sdhci_bus_info = { 1529 .name = TYPE_SDHCI_BUS, 1530 .parent = TYPE_SD_BUS, 1531 .instance_size = sizeof(SDBus), 1532 .class_init = sdhci_bus_class_init, 1533 }; 1534 1535 /* --- qdev i.MX eSDHC --- */ 1536 1537 static uint64_t usdhc_read(void *opaque, hwaddr offset, unsigned size) 1538 { 1539 SDHCIState *s = SYSBUS_SDHCI(opaque); 1540 uint32_t ret; 1541 uint16_t hostctl1; 1542 1543 switch (offset) { 1544 default: 1545 return sdhci_read(opaque, offset, size); 1546 1547 case SDHC_HOSTCTL: 1548 /* 1549 * For a detailed explanation on the following bit 1550 * manipulation code see comments in a similar part of 1551 * usdhc_write() 1552 */ 1553 hostctl1 = SDHC_DMA_TYPE(s->hostctl1) << (8 - 3); 1554 1555 if (s->hostctl1 & SDHC_CTRL_8BITBUS) { 1556 hostctl1 |= ESDHC_CTRL_8BITBUS; 1557 } 1558 1559 if (s->hostctl1 & SDHC_CTRL_4BITBUS) { 1560 hostctl1 |= ESDHC_CTRL_4BITBUS; 1561 } 1562 1563 ret = hostctl1; 1564 ret |= (uint32_t)s->blkgap << 16; 1565 ret |= (uint32_t)s->wakcon << 24; 1566 1567 break; 1568 1569 case SDHC_PRNSTS: 1570 /* Add SDSTB (SD Clock Stable) bit to PRNSTS */ 1571 ret = sdhci_read(opaque, offset, size) & ~ESDHC_PRNSTS_SDSTB; 1572 if (s->clkcon & SDHC_CLOCK_INT_STABLE) { 1573 ret |= ESDHC_PRNSTS_SDSTB; 1574 } 1575 break; 1576 1577 case ESDHC_DLL_CTRL: 1578 case ESDHC_TUNE_CTRL_STATUS: 1579 case ESDHC_UNDOCUMENTED_REG27: 1580 case ESDHC_TUNING_CTRL: 1581 case ESDHC_VENDOR_SPEC: 1582 case ESDHC_MIX_CTRL: 1583 case ESDHC_WTMK_LVL: 1584 ret = 0; 1585 break; 1586 } 1587 1588 return ret; 1589 } 1590 1591 static void 1592 usdhc_write(void *opaque, hwaddr offset, uint64_t val, unsigned size) 1593 { 1594 SDHCIState *s = SYSBUS_SDHCI(opaque); 1595 uint8_t hostctl1; 1596 uint32_t value = (uint32_t)val; 1597 1598 switch (offset) { 1599 case ESDHC_DLL_CTRL: 1600 case ESDHC_TUNE_CTRL_STATUS: 1601 case ESDHC_UNDOCUMENTED_REG27: 1602 case ESDHC_TUNING_CTRL: 1603 case ESDHC_WTMK_LVL: 1604 case ESDHC_VENDOR_SPEC: 1605 break; 1606 1607 case SDHC_HOSTCTL: 1608 /* 1609 * Here's What ESDHCI has at offset 0x28 (SDHC_HOSTCTL) 1610 * 1611 * 7 6 5 4 3 2 1 0 1612 * |-----------+--------+--------+-----------+----------+---------| 1613 * | Card | Card | Endian | DATA3 | Data | Led | 1614 * | Detect | Detect | Mode | as Card | Transfer | Control | 1615 * | Signal | Test | | Detection | Width | | 1616 * | Selection | Level | | Pin | | | 1617 * |-----------+--------+--------+-----------+----------+---------| 1618 * 1619 * and 0x29 1620 * 1621 * 15 10 9 8 1622 * |----------+------| 1623 * | Reserved | DMA | 1624 * | | Sel. | 1625 * | | | 1626 * |----------+------| 1627 * 1628 * and here's what SDCHI spec expects those offsets to be: 1629 * 1630 * 0x28 (Host Control Register) 1631 * 1632 * 7 6 5 4 3 2 1 0 1633 * |--------+--------+----------+------+--------+----------+---------| 1634 * | Card | Card | Extended | DMA | High | Data | LED | 1635 * | Detect | Detect | Data | Sel. | Speed | Transfer | Control | 1636 * | Signal | Test | Transfer | | Enable | Width | | 1637 * | Sel. | Level | Width | | | | | 1638 * |--------+--------+----------+------+--------+----------+---------| 1639 * 1640 * and 0x29 (Power Control Register) 1641 * 1642 * |----------------------------------| 1643 * | Power Control Register | 1644 * | | 1645 * | Description omitted, | 1646 * | since it has no analog in ESDHCI | 1647 * | | 1648 * |----------------------------------| 1649 * 1650 * Since offsets 0x2A and 0x2B should be compatible between 1651 * both IP specs we only need to reconcile least 16-bit of the 1652 * word we've been given. 1653 */ 1654 1655 /* 1656 * First, save bits 7 6 and 0 since they are identical 1657 */ 1658 hostctl1 = value & (SDHC_CTRL_LED | 1659 SDHC_CTRL_CDTEST_INS | 1660 SDHC_CTRL_CDTEST_EN); 1661 /* 1662 * Second, split "Data Transfer Width" from bits 2 and 1 in to 1663 * bits 5 and 1 1664 */ 1665 if (value & ESDHC_CTRL_8BITBUS) { 1666 hostctl1 |= SDHC_CTRL_8BITBUS; 1667 } 1668 1669 if (value & ESDHC_CTRL_4BITBUS) { 1670 hostctl1 |= ESDHC_CTRL_4BITBUS; 1671 } 1672 1673 /* 1674 * Third, move DMA select from bits 9 and 8 to bits 4 and 3 1675 */ 1676 hostctl1 |= SDHC_DMA_TYPE(value >> (8 - 3)); 1677 1678 /* 1679 * Now place the corrected value into low 16-bit of the value 1680 * we are going to give standard SDHCI write function 1681 * 1682 * NOTE: This transformation should be the inverse of what can 1683 * be found in drivers/mmc/host/sdhci-esdhc-imx.c in Linux 1684 * kernel 1685 */ 1686 value &= ~UINT16_MAX; 1687 value |= hostctl1; 1688 value |= (uint16_t)s->pwrcon << 8; 1689 1690 sdhci_write(opaque, offset, value, size); 1691 break; 1692 1693 case ESDHC_MIX_CTRL: 1694 /* 1695 * So, when SD/MMC stack in Linux tries to write to "Transfer 1696 * Mode Register", ESDHC i.MX quirk code will translate it 1697 * into a write to ESDHC_MIX_CTRL, so we do the opposite in 1698 * order to get where we started 1699 * 1700 * Note that Auto CMD23 Enable bit is located in a wrong place 1701 * on i.MX, but since it is not used by QEMU we do not care. 1702 * 1703 * We don't want to call sdhci_write(.., SDHC_TRNMOD, ...) 1704 * here becuase it will result in a call to 1705 * sdhci_send_command(s) which we don't want. 1706 * 1707 */ 1708 s->trnmod = value & UINT16_MAX; 1709 break; 1710 case SDHC_TRNMOD: 1711 /* 1712 * Similar to above, but this time a write to "Command 1713 * Register" will be translated into a 4-byte write to 1714 * "Transfer Mode register" where lower 16-bit of value would 1715 * be set to zero. So what we do is fill those bits with 1716 * cached value from s->trnmod and let the SDHCI 1717 * infrastructure handle the rest 1718 */ 1719 sdhci_write(opaque, offset, val | s->trnmod, size); 1720 break; 1721 case SDHC_BLKSIZE: 1722 /* 1723 * ESDHCI does not implement "Host SDMA Buffer Boundary", and 1724 * Linux driver will try to zero this field out which will 1725 * break the rest of SDHCI emulation. 1726 * 1727 * Linux defaults to maximum possible setting (512K boundary) 1728 * and it seems to be the only option that i.MX IP implements, 1729 * so we artificially set it to that value. 1730 */ 1731 val |= 0x7 << 12; 1732 /* FALLTHROUGH */ 1733 default: 1734 sdhci_write(opaque, offset, val, size); 1735 break; 1736 } 1737 } 1738 1739 static const MemoryRegionOps usdhc_mmio_ops = { 1740 .read = usdhc_read, 1741 .write = usdhc_write, 1742 .valid = { 1743 .min_access_size = 1, 1744 .max_access_size = 4, 1745 .unaligned = false 1746 }, 1747 .endianness = DEVICE_LITTLE_ENDIAN, 1748 }; 1749 1750 static void imx_usdhc_init(Object *obj) 1751 { 1752 SDHCIState *s = SYSBUS_SDHCI(obj); 1753 1754 s->io_ops = &usdhc_mmio_ops; 1755 s->quirks = SDHCI_QUIRK_NO_BUSY_IRQ; 1756 } 1757 1758 static const TypeInfo imx_usdhc_info = { 1759 .name = TYPE_IMX_USDHC, 1760 .parent = TYPE_SYSBUS_SDHCI, 1761 .instance_init = imx_usdhc_init, 1762 }; 1763 1764 /* --- qdev Samsung s3c --- */ 1765 1766 #define S3C_SDHCI_CONTROL2 0x80 1767 #define S3C_SDHCI_CONTROL3 0x84 1768 #define S3C_SDHCI_CONTROL4 0x8c 1769 1770 static uint64_t sdhci_s3c_read(void *opaque, hwaddr offset, unsigned size) 1771 { 1772 uint64_t ret; 1773 1774 switch (offset) { 1775 case S3C_SDHCI_CONTROL2: 1776 case S3C_SDHCI_CONTROL3: 1777 case S3C_SDHCI_CONTROL4: 1778 /* ignore */ 1779 ret = 0; 1780 break; 1781 default: 1782 ret = sdhci_read(opaque, offset, size); 1783 break; 1784 } 1785 1786 return ret; 1787 } 1788 1789 static void sdhci_s3c_write(void *opaque, hwaddr offset, uint64_t val, 1790 unsigned size) 1791 { 1792 switch (offset) { 1793 case S3C_SDHCI_CONTROL2: 1794 case S3C_SDHCI_CONTROL3: 1795 case S3C_SDHCI_CONTROL4: 1796 /* ignore */ 1797 break; 1798 default: 1799 sdhci_write(opaque, offset, val, size); 1800 break; 1801 } 1802 } 1803 1804 static const MemoryRegionOps sdhci_s3c_mmio_ops = { 1805 .read = sdhci_s3c_read, 1806 .write = sdhci_s3c_write, 1807 .valid = { 1808 .min_access_size = 1, 1809 .max_access_size = 4, 1810 .unaligned = false 1811 }, 1812 .endianness = DEVICE_LITTLE_ENDIAN, 1813 }; 1814 1815 static void sdhci_s3c_init(Object *obj) 1816 { 1817 SDHCIState *s = SYSBUS_SDHCI(obj); 1818 1819 s->io_ops = &sdhci_s3c_mmio_ops; 1820 } 1821 1822 static const TypeInfo sdhci_s3c_info = { 1823 .name = TYPE_S3C_SDHCI , 1824 .parent = TYPE_SYSBUS_SDHCI, 1825 .instance_init = sdhci_s3c_init, 1826 }; 1827 1828 static void sdhci_register_types(void) 1829 { 1830 type_register_static(&sdhci_sysbus_info); 1831 type_register_static(&sdhci_bus_info); 1832 type_register_static(&imx_usdhc_info); 1833 type_register_static(&sdhci_s3c_info); 1834 } 1835 1836 type_init(sdhci_register_types) 1837