1 /* 2 * SD Memory Card emulation as defined in the "SD Memory Card Physical 3 * layer specification, Version 2.00." 4 * 5 * Copyright (c) 2006 Andrzej Zaborowski <balrog@zabor.org> 6 * Copyright (c) 2007 CodeSourcery 7 * Copyright (c) 2018 Philippe Mathieu-Daudé <f4bug@amsat.org> 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in 17 * the documentation and/or other materials provided with the 18 * distribution. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' 21 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 23 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR 24 * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, 25 * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR 27 * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY 28 * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 30 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 #include "qemu/osdep.h" 34 #include "qemu/units.h" 35 #include "qemu/cutils.h" 36 #include "hw/irq.h" 37 #include "hw/registerfields.h" 38 #include "sysemu/block-backend.h" 39 #include "hw/sd/sd.h" 40 #include "hw/sd/sdcard_legacy.h" 41 #include "migration/vmstate.h" 42 #include "qapi/error.h" 43 #include "qemu/bitmap.h" 44 #include "hw/qdev-properties.h" 45 #include "hw/qdev-properties-system.h" 46 #include "qemu/error-report.h" 47 #include "qemu/timer.h" 48 #include "qemu/log.h" 49 #include "qemu/module.h" 50 #include "sdmmc-internal.h" 51 #include "trace.h" 52 53 //#define DEBUG_SD 1 54 55 #define SDSC_MAX_CAPACITY (2 * GiB) 56 57 #define INVALID_ADDRESS UINT32_MAX 58 59 typedef enum { 60 sd_r0 = 0, /* no response */ 61 sd_r1, /* normal response command */ 62 sd_r2_i, /* CID register */ 63 sd_r2_s, /* CSD register */ 64 sd_r3, /* OCR register */ 65 sd_r6 = 6, /* Published RCA response */ 66 sd_r7, /* Operating voltage */ 67 sd_r1b = -1, 68 sd_illegal = -2, 69 } sd_rsp_type_t; 70 71 enum SDCardModes { 72 sd_inactive, 73 sd_card_identification_mode, 74 sd_data_transfer_mode, 75 }; 76 77 enum SDCardStates { 78 sd_inactive_state = -1, 79 sd_idle_state = 0, 80 sd_ready_state, 81 sd_identification_state, 82 sd_standby_state, 83 sd_transfer_state, 84 sd_sendingdata_state, 85 sd_receivingdata_state, 86 sd_programming_state, 87 sd_disconnect_state, 88 }; 89 90 struct SDState { 91 DeviceState parent_obj; 92 93 /* If true, created by sd_init() for a non-qdevified caller */ 94 /* TODO purge them with fire */ 95 bool me_no_qdev_me_kill_mammoth_with_rocks; 96 97 /* SD Memory Card Registers */ 98 uint32_t ocr; 99 uint8_t scr[8]; 100 uint8_t cid[16]; 101 uint8_t csd[16]; 102 uint16_t rca; 103 uint32_t card_status; 104 uint8_t sd_status[64]; 105 106 /* Static properties */ 107 108 uint8_t spec_version; 109 BlockBackend *blk; 110 bool spi; 111 112 /* Runtime changeables */ 113 114 uint32_t mode; /* current card mode, one of SDCardModes */ 115 int32_t state; /* current card state, one of SDCardStates */ 116 uint32_t vhs; 117 bool wp_switch; 118 unsigned long *wp_groups; 119 int32_t wpgrps_size; 120 uint64_t size; 121 uint32_t blk_len; 122 uint32_t multi_blk_cnt; 123 uint32_t erase_start; 124 uint32_t erase_end; 125 uint8_t pwd[16]; 126 uint32_t pwd_len; 127 uint8_t function_group[6]; 128 uint8_t current_cmd; 129 /* True if we will handle the next command as an ACMD. Note that this does 130 * *not* track the APP_CMD status bit! 131 */ 132 bool expecting_acmd; 133 uint32_t blk_written; 134 uint64_t data_start; 135 uint32_t data_offset; 136 uint8_t data[512]; 137 qemu_irq readonly_cb; 138 qemu_irq inserted_cb; 139 QEMUTimer *ocr_power_timer; 140 const char *proto_name; 141 bool enable; 142 uint8_t dat_lines; 143 bool cmd_line; 144 }; 145 146 static void sd_realize(DeviceState *dev, Error **errp); 147 148 static const char *sd_state_name(enum SDCardStates state) 149 { 150 static const char *state_name[] = { 151 [sd_idle_state] = "idle", 152 [sd_ready_state] = "ready", 153 [sd_identification_state] = "identification", 154 [sd_standby_state] = "standby", 155 [sd_transfer_state] = "transfer", 156 [sd_sendingdata_state] = "sendingdata", 157 [sd_receivingdata_state] = "receivingdata", 158 [sd_programming_state] = "programming", 159 [sd_disconnect_state] = "disconnect", 160 }; 161 if (state == sd_inactive_state) { 162 return "inactive"; 163 } 164 assert(state < ARRAY_SIZE(state_name)); 165 return state_name[state]; 166 } 167 168 static const char *sd_response_name(sd_rsp_type_t rsp) 169 { 170 static const char *response_name[] = { 171 [sd_r0] = "RESP#0 (no response)", 172 [sd_r1] = "RESP#1 (normal cmd)", 173 [sd_r2_i] = "RESP#2 (CID reg)", 174 [sd_r2_s] = "RESP#2 (CSD reg)", 175 [sd_r3] = "RESP#3 (OCR reg)", 176 [sd_r6] = "RESP#6 (RCA)", 177 [sd_r7] = "RESP#7 (operating voltage)", 178 }; 179 if (rsp == sd_illegal) { 180 return "ILLEGAL RESP"; 181 } 182 if (rsp == sd_r1b) { 183 rsp = sd_r1; 184 } 185 assert(rsp < ARRAY_SIZE(response_name)); 186 return response_name[rsp]; 187 } 188 189 static uint8_t sd_get_dat_lines(SDState *sd) 190 { 191 return sd->enable ? sd->dat_lines : 0; 192 } 193 194 static bool sd_get_cmd_line(SDState *sd) 195 { 196 return sd->enable ? sd->cmd_line : false; 197 } 198 199 static void sd_set_voltage(SDState *sd, uint16_t millivolts) 200 { 201 trace_sdcard_set_voltage(millivolts); 202 203 switch (millivolts) { 204 case 3001 ... 3600: /* SD_VOLTAGE_3_3V */ 205 case 2001 ... 3000: /* SD_VOLTAGE_3_0V */ 206 break; 207 default: 208 qemu_log_mask(LOG_GUEST_ERROR, "SD card voltage not supported: %.3fV", 209 millivolts / 1000.f); 210 } 211 } 212 213 static void sd_set_mode(SDState *sd) 214 { 215 switch (sd->state) { 216 case sd_inactive_state: 217 sd->mode = sd_inactive; 218 break; 219 220 case sd_idle_state: 221 case sd_ready_state: 222 case sd_identification_state: 223 sd->mode = sd_card_identification_mode; 224 break; 225 226 case sd_standby_state: 227 case sd_transfer_state: 228 case sd_sendingdata_state: 229 case sd_receivingdata_state: 230 case sd_programming_state: 231 case sd_disconnect_state: 232 sd->mode = sd_data_transfer_mode; 233 break; 234 } 235 } 236 237 static const sd_cmd_type_t sd_cmd_type[SDMMC_CMD_MAX] = { 238 sd_bc, sd_none, sd_bcr, sd_bcr, sd_none, sd_none, sd_none, sd_ac, 239 sd_bcr, sd_ac, sd_ac, sd_adtc, sd_ac, sd_ac, sd_none, sd_ac, 240 /* 16 */ 241 sd_ac, sd_adtc, sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, 242 sd_adtc, sd_adtc, sd_adtc, sd_adtc, sd_ac, sd_ac, sd_adtc, sd_none, 243 /* 32 */ 244 sd_ac, sd_ac, sd_none, sd_none, sd_none, sd_none, sd_ac, sd_none, 245 sd_none, sd_none, sd_bc, sd_none, sd_none, sd_none, sd_none, sd_none, 246 /* 48 */ 247 sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_ac, 248 sd_adtc, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, sd_none, 249 }; 250 251 static const int sd_cmd_class[SDMMC_CMD_MAX] = { 252 0, 0, 0, 0, 0, 9, 10, 0, 0, 0, 0, 1, 0, 0, 0, 0, 253 2, 2, 2, 2, 3, 3, 3, 3, 4, 4, 4, 4, 6, 6, 6, 6, 254 5, 5, 10, 10, 10, 10, 5, 9, 9, 9, 7, 7, 7, 7, 7, 7, 255 7, 7, 10, 7, 9, 9, 9, 8, 8, 10, 8, 8, 8, 8, 8, 8, 256 }; 257 258 static uint8_t sd_crc7(const void *message, size_t width) 259 { 260 int i, bit; 261 uint8_t shift_reg = 0x00; 262 const uint8_t *msg = (const uint8_t *)message; 263 264 for (i = 0; i < width; i ++, msg ++) 265 for (bit = 7; bit >= 0; bit --) { 266 shift_reg <<= 1; 267 if ((shift_reg >> 7) ^ ((*msg >> bit) & 1)) 268 shift_reg ^= 0x89; 269 } 270 271 return shift_reg; 272 } 273 274 static uint16_t sd_crc16(const void *message, size_t width) 275 { 276 int i, bit; 277 uint16_t shift_reg = 0x0000; 278 const uint16_t *msg = (const uint16_t *)message; 279 width <<= 1; 280 281 for (i = 0; i < width; i ++, msg ++) 282 for (bit = 15; bit >= 0; bit --) { 283 shift_reg <<= 1; 284 if ((shift_reg >> 15) ^ ((*msg >> bit) & 1)) 285 shift_reg ^= 0x1011; 286 } 287 288 return shift_reg; 289 } 290 291 #define OCR_POWER_DELAY_NS 500000 /* 0.5ms */ 292 293 FIELD(OCR, VDD_VOLTAGE_WINDOW, 0, 24) 294 FIELD(OCR, VDD_VOLTAGE_WIN_LO, 0, 8) 295 FIELD(OCR, DUAL_VOLTAGE_CARD, 7, 1) 296 FIELD(OCR, VDD_VOLTAGE_WIN_HI, 8, 16) 297 FIELD(OCR, ACCEPT_SWITCH_1V8, 24, 1) /* Only UHS-I */ 298 FIELD(OCR, UHS_II_CARD, 29, 1) /* Only UHS-II */ 299 FIELD(OCR, CARD_CAPACITY, 30, 1) /* 0:SDSC, 1:SDHC/SDXC */ 300 FIELD(OCR, CARD_POWER_UP, 31, 1) 301 302 #define ACMD41_ENQUIRY_MASK 0x00ffffff 303 #define ACMD41_R3_MASK (R_OCR_VDD_VOLTAGE_WIN_HI_MASK \ 304 | R_OCR_ACCEPT_SWITCH_1V8_MASK \ 305 | R_OCR_UHS_II_CARD_MASK \ 306 | R_OCR_CARD_CAPACITY_MASK \ 307 | R_OCR_CARD_POWER_UP_MASK) 308 309 static void sd_set_ocr(SDState *sd) 310 { 311 /* All voltages OK */ 312 sd->ocr = R_OCR_VDD_VOLTAGE_WIN_HI_MASK; 313 } 314 315 static void sd_ocr_powerup(void *opaque) 316 { 317 SDState *sd = opaque; 318 319 trace_sdcard_powerup(); 320 assert(!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)); 321 322 /* card power-up OK */ 323 sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_POWER_UP, 1); 324 325 if (sd->size > SDSC_MAX_CAPACITY) { 326 sd->ocr = FIELD_DP32(sd->ocr, OCR, CARD_CAPACITY, 1); 327 } 328 } 329 330 static void sd_set_scr(SDState *sd) 331 { 332 sd->scr[0] = 0 << 4; /* SCR structure version 1.0 */ 333 if (sd->spec_version == SD_PHY_SPECv1_10_VERS) { 334 sd->scr[0] |= 1; /* Spec Version 1.10 */ 335 } else { 336 sd->scr[0] |= 2; /* Spec Version 2.00 or Version 3.0X */ 337 } 338 sd->scr[1] = (2 << 4) /* SDSC Card (Security Version 1.01) */ 339 | 0b0101; /* 1-bit or 4-bit width bus modes */ 340 sd->scr[2] = 0x00; /* Extended Security is not supported. */ 341 if (sd->spec_version >= SD_PHY_SPECv3_01_VERS) { 342 sd->scr[2] |= 1 << 7; /* Spec Version 3.0X */ 343 } 344 sd->scr[3] = 0x00; 345 /* reserved for manufacturer usage */ 346 sd->scr[4] = 0x00; 347 sd->scr[5] = 0x00; 348 sd->scr[6] = 0x00; 349 sd->scr[7] = 0x00; 350 } 351 352 #define MID 0xaa 353 #define OID "XY" 354 #define PNM "QEMU!" 355 #define PRV 0x01 356 #define MDT_YR 2006 357 #define MDT_MON 2 358 359 static void sd_set_cid(SDState *sd) 360 { 361 sd->cid[0] = MID; /* Fake card manufacturer ID (MID) */ 362 sd->cid[1] = OID[0]; /* OEM/Application ID (OID) */ 363 sd->cid[2] = OID[1]; 364 sd->cid[3] = PNM[0]; /* Fake product name (PNM) */ 365 sd->cid[4] = PNM[1]; 366 sd->cid[5] = PNM[2]; 367 sd->cid[6] = PNM[3]; 368 sd->cid[7] = PNM[4]; 369 sd->cid[8] = PRV; /* Fake product revision (PRV) */ 370 sd->cid[9] = 0xde; /* Fake serial number (PSN) */ 371 sd->cid[10] = 0xad; 372 sd->cid[11] = 0xbe; 373 sd->cid[12] = 0xef; 374 sd->cid[13] = 0x00 | /* Manufacture date (MDT) */ 375 ((MDT_YR - 2000) / 10); 376 sd->cid[14] = ((MDT_YR % 10) << 4) | MDT_MON; 377 sd->cid[15] = (sd_crc7(sd->cid, 15) << 1) | 1; 378 } 379 380 #define HWBLOCK_SHIFT 9 /* 512 bytes */ 381 #define SECTOR_SHIFT 5 /* 16 kilobytes */ 382 #define WPGROUP_SHIFT 7 /* 2 megs */ 383 #define CMULT_SHIFT 9 /* 512 times HWBLOCK_SIZE */ 384 #define WPGROUP_SIZE (1 << (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT)) 385 386 static const uint8_t sd_csd_rw_mask[16] = { 387 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 388 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, 389 }; 390 391 static void sd_set_csd(SDState *sd, uint64_t size) 392 { 393 int hwblock_shift = HWBLOCK_SHIFT; 394 uint32_t csize; 395 uint32_t sectsize = (1 << (SECTOR_SHIFT + 1)) - 1; 396 uint32_t wpsize = (1 << (WPGROUP_SHIFT + 1)) - 1; 397 398 /* To indicate 2 GiB card, BLOCK_LEN shall be 1024 bytes */ 399 if (size == SDSC_MAX_CAPACITY) { 400 hwblock_shift += 1; 401 } 402 csize = (size >> (CMULT_SHIFT + hwblock_shift)) - 1; 403 404 if (size <= SDSC_MAX_CAPACITY) { /* Standard Capacity SD */ 405 sd->csd[0] = 0x00; /* CSD structure */ 406 sd->csd[1] = 0x26; /* Data read access-time-1 */ 407 sd->csd[2] = 0x00; /* Data read access-time-2 */ 408 sd->csd[3] = 0x32; /* Max. data transfer rate: 25 MHz */ 409 sd->csd[4] = 0x5f; /* Card Command Classes */ 410 sd->csd[5] = 0x50 | /* Max. read data block length */ 411 hwblock_shift; 412 sd->csd[6] = 0xe0 | /* Partial block for read allowed */ 413 ((csize >> 10) & 0x03); 414 sd->csd[7] = 0x00 | /* Device size */ 415 ((csize >> 2) & 0xff); 416 sd->csd[8] = 0x3f | /* Max. read current */ 417 ((csize << 6) & 0xc0); 418 sd->csd[9] = 0xfc | /* Max. write current */ 419 ((CMULT_SHIFT - 2) >> 1); 420 sd->csd[10] = 0x40 | /* Erase sector size */ 421 (((CMULT_SHIFT - 2) << 7) & 0x80) | (sectsize >> 1); 422 sd->csd[11] = 0x00 | /* Write protect group size */ 423 ((sectsize << 7) & 0x80) | wpsize; 424 sd->csd[12] = 0x90 | /* Write speed factor */ 425 (hwblock_shift >> 2); 426 sd->csd[13] = 0x20 | /* Max. write data block length */ 427 ((hwblock_shift << 6) & 0xc0); 428 sd->csd[14] = 0x00; /* File format group */ 429 } else { /* SDHC */ 430 size /= 512 * KiB; 431 size -= 1; 432 sd->csd[0] = 0x40; 433 sd->csd[1] = 0x0e; 434 sd->csd[2] = 0x00; 435 sd->csd[3] = 0x32; 436 sd->csd[4] = 0x5b; 437 sd->csd[5] = 0x59; 438 sd->csd[6] = 0x00; 439 sd->csd[7] = (size >> 16) & 0xff; 440 sd->csd[8] = (size >> 8) & 0xff; 441 sd->csd[9] = (size & 0xff); 442 sd->csd[10] = 0x7f; 443 sd->csd[11] = 0x80; 444 sd->csd[12] = 0x0a; 445 sd->csd[13] = 0x40; 446 sd->csd[14] = 0x00; 447 } 448 sd->csd[15] = (sd_crc7(sd->csd, 15) << 1) | 1; 449 } 450 451 static void sd_set_rca(SDState *sd) 452 { 453 sd->rca += 0x4567; 454 } 455 456 FIELD(CSR, AKE_SEQ_ERROR, 3, 1) 457 FIELD(CSR, APP_CMD, 5, 1) 458 FIELD(CSR, FX_EVENT, 6, 1) 459 FIELD(CSR, READY_FOR_DATA, 8, 1) 460 FIELD(CSR, CURRENT_STATE, 9, 4) 461 FIELD(CSR, ERASE_RESET, 13, 1) 462 FIELD(CSR, CARD_ECC_DISABLED, 14, 1) 463 FIELD(CSR, WP_ERASE_SKIP, 15, 1) 464 FIELD(CSR, CSD_OVERWRITE, 16, 1) 465 FIELD(CSR, DEFERRED_RESPONSE, 17, 1) 466 FIELD(CSR, ERROR, 19, 1) 467 FIELD(CSR, CC_ERROR, 20, 1) 468 FIELD(CSR, CARD_ECC_FAILED, 21, 1) 469 FIELD(CSR, ILLEGAL_COMMAND, 22, 1) 470 FIELD(CSR, COM_CRC_ERROR, 23, 1) 471 FIELD(CSR, LOCK_UNLOCK_FAILED, 24, 1) 472 FIELD(CSR, CARD_IS_LOCKED, 25, 1) 473 FIELD(CSR, WP_VIOLATION, 26, 1) 474 FIELD(CSR, ERASE_PARAM, 27, 1) 475 FIELD(CSR, ERASE_SEQ_ERROR, 28, 1) 476 FIELD(CSR, BLOCK_LEN_ERROR, 29, 1) 477 FIELD(CSR, ADDRESS_ERROR, 30, 1) 478 FIELD(CSR, OUT_OF_RANGE, 31, 1) 479 480 /* Card status bits, split by clear condition: 481 * A : According to the card current state 482 * B : Always related to the previous command 483 * C : Cleared by read 484 */ 485 #define CARD_STATUS_A (R_CSR_READY_FOR_DATA_MASK \ 486 | R_CSR_CARD_ECC_DISABLED_MASK \ 487 | R_CSR_CARD_IS_LOCKED_MASK) 488 #define CARD_STATUS_B (R_CSR_CURRENT_STATE_MASK \ 489 | R_CSR_ILLEGAL_COMMAND_MASK \ 490 | R_CSR_COM_CRC_ERROR_MASK) 491 #define CARD_STATUS_C (R_CSR_AKE_SEQ_ERROR_MASK \ 492 | R_CSR_APP_CMD_MASK \ 493 | R_CSR_ERASE_RESET_MASK \ 494 | R_CSR_WP_ERASE_SKIP_MASK \ 495 | R_CSR_CSD_OVERWRITE_MASK \ 496 | R_CSR_ERROR_MASK \ 497 | R_CSR_CC_ERROR_MASK \ 498 | R_CSR_CARD_ECC_FAILED_MASK \ 499 | R_CSR_LOCK_UNLOCK_FAILED_MASK \ 500 | R_CSR_WP_VIOLATION_MASK \ 501 | R_CSR_ERASE_PARAM_MASK \ 502 | R_CSR_ERASE_SEQ_ERROR_MASK \ 503 | R_CSR_BLOCK_LEN_ERROR_MASK \ 504 | R_CSR_ADDRESS_ERROR_MASK \ 505 | R_CSR_OUT_OF_RANGE_MASK) 506 507 static void sd_set_cardstatus(SDState *sd) 508 { 509 sd->card_status = 0x00000100; 510 } 511 512 static void sd_set_sdstatus(SDState *sd) 513 { 514 memset(sd->sd_status, 0, 64); 515 } 516 517 static int sd_req_crc_validate(SDRequest *req) 518 { 519 uint8_t buffer[5]; 520 buffer[0] = 0x40 | req->cmd; 521 stl_be_p(&buffer[1], req->arg); 522 return 0; 523 return sd_crc7(buffer, 5) != req->crc; /* TODO */ 524 } 525 526 static void sd_response_r1_make(SDState *sd, uint8_t *response) 527 { 528 stl_be_p(response, sd->card_status); 529 530 /* Clear the "clear on read" status bits */ 531 sd->card_status &= ~CARD_STATUS_C; 532 } 533 534 static void sd_response_r3_make(SDState *sd, uint8_t *response) 535 { 536 stl_be_p(response, sd->ocr & ACMD41_R3_MASK); 537 } 538 539 static void sd_response_r6_make(SDState *sd, uint8_t *response) 540 { 541 uint16_t status; 542 543 status = ((sd->card_status >> 8) & 0xc000) | 544 ((sd->card_status >> 6) & 0x2000) | 545 (sd->card_status & 0x1fff); 546 sd->card_status &= ~(CARD_STATUS_C & 0xc81fff); 547 stw_be_p(response + 0, sd->rca); 548 stw_be_p(response + 2, status); 549 } 550 551 static void sd_response_r7_make(SDState *sd, uint8_t *response) 552 { 553 stl_be_p(response, sd->vhs); 554 } 555 556 static inline uint64_t sd_addr_to_wpnum(uint64_t addr) 557 { 558 return addr >> (HWBLOCK_SHIFT + SECTOR_SHIFT + WPGROUP_SHIFT); 559 } 560 561 static void sd_reset(DeviceState *dev) 562 { 563 SDState *sd = SD_CARD(dev); 564 uint64_t size; 565 uint64_t sect; 566 567 trace_sdcard_reset(); 568 if (sd->blk) { 569 blk_get_geometry(sd->blk, §); 570 } else { 571 sect = 0; 572 } 573 size = sect << 9; 574 575 sect = sd_addr_to_wpnum(size) + 1; 576 577 sd->state = sd_idle_state; 578 sd->rca = 0x0000; 579 sd_set_ocr(sd); 580 sd_set_scr(sd); 581 sd_set_cid(sd); 582 sd_set_csd(sd, size); 583 sd_set_cardstatus(sd); 584 sd_set_sdstatus(sd); 585 586 g_free(sd->wp_groups); 587 sd->wp_switch = sd->blk ? blk_is_read_only(sd->blk) : false; 588 sd->wpgrps_size = sect; 589 sd->wp_groups = bitmap_new(sd->wpgrps_size); 590 memset(sd->function_group, 0, sizeof(sd->function_group)); 591 sd->erase_start = INVALID_ADDRESS; 592 sd->erase_end = INVALID_ADDRESS; 593 sd->size = size; 594 sd->blk_len = 0x200; 595 sd->pwd_len = 0; 596 sd->expecting_acmd = false; 597 sd->dat_lines = 0xf; 598 sd->cmd_line = true; 599 sd->multi_blk_cnt = 0; 600 } 601 602 static bool sd_get_inserted(SDState *sd) 603 { 604 return sd->blk && blk_is_inserted(sd->blk); 605 } 606 607 static bool sd_get_readonly(SDState *sd) 608 { 609 return sd->wp_switch; 610 } 611 612 static void sd_cardchange(void *opaque, bool load, Error **errp) 613 { 614 SDState *sd = opaque; 615 DeviceState *dev = DEVICE(sd); 616 SDBus *sdbus; 617 bool inserted = sd_get_inserted(sd); 618 bool readonly = sd_get_readonly(sd); 619 620 if (inserted) { 621 trace_sdcard_inserted(readonly); 622 sd_reset(dev); 623 } else { 624 trace_sdcard_ejected(); 625 } 626 627 if (sd->me_no_qdev_me_kill_mammoth_with_rocks) { 628 qemu_set_irq(sd->inserted_cb, inserted); 629 if (inserted) { 630 qemu_set_irq(sd->readonly_cb, readonly); 631 } 632 } else { 633 sdbus = SD_BUS(qdev_get_parent_bus(dev)); 634 sdbus_set_inserted(sdbus, inserted); 635 if (inserted) { 636 sdbus_set_readonly(sdbus, readonly); 637 } 638 } 639 } 640 641 static const BlockDevOps sd_block_ops = { 642 .change_media_cb = sd_cardchange, 643 }; 644 645 static bool sd_ocr_vmstate_needed(void *opaque) 646 { 647 SDState *sd = opaque; 648 649 /* Include the OCR state (and timer) if it is not yet powered up */ 650 return !FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP); 651 } 652 653 static const VMStateDescription sd_ocr_vmstate = { 654 .name = "sd-card/ocr-state", 655 .version_id = 1, 656 .minimum_version_id = 1, 657 .needed = sd_ocr_vmstate_needed, 658 .fields = (VMStateField[]) { 659 VMSTATE_UINT32(ocr, SDState), 660 VMSTATE_TIMER_PTR(ocr_power_timer, SDState), 661 VMSTATE_END_OF_LIST() 662 }, 663 }; 664 665 static int sd_vmstate_pre_load(void *opaque) 666 { 667 SDState *sd = opaque; 668 669 /* If the OCR state is not included (prior versions, or not 670 * needed), then the OCR must be set as powered up. If the OCR state 671 * is included, this will be replaced by the state restore. 672 */ 673 sd_ocr_powerup(sd); 674 675 return 0; 676 } 677 678 static const VMStateDescription sd_vmstate = { 679 .name = "sd-card", 680 .version_id = 2, 681 .minimum_version_id = 2, 682 .pre_load = sd_vmstate_pre_load, 683 .fields = (VMStateField[]) { 684 VMSTATE_UINT32(mode, SDState), 685 VMSTATE_INT32(state, SDState), 686 VMSTATE_UINT8_ARRAY(cid, SDState, 16), 687 VMSTATE_UINT8_ARRAY(csd, SDState, 16), 688 VMSTATE_UINT16(rca, SDState), 689 VMSTATE_UINT32(card_status, SDState), 690 VMSTATE_PARTIAL_BUFFER(sd_status, SDState, 1), 691 VMSTATE_UINT32(vhs, SDState), 692 VMSTATE_BITMAP(wp_groups, SDState, 0, wpgrps_size), 693 VMSTATE_UINT32(blk_len, SDState), 694 VMSTATE_UINT32(multi_blk_cnt, SDState), 695 VMSTATE_UINT32(erase_start, SDState), 696 VMSTATE_UINT32(erase_end, SDState), 697 VMSTATE_UINT8_ARRAY(pwd, SDState, 16), 698 VMSTATE_UINT32(pwd_len, SDState), 699 VMSTATE_UINT8_ARRAY(function_group, SDState, 6), 700 VMSTATE_UINT8(current_cmd, SDState), 701 VMSTATE_BOOL(expecting_acmd, SDState), 702 VMSTATE_UINT32(blk_written, SDState), 703 VMSTATE_UINT64(data_start, SDState), 704 VMSTATE_UINT32(data_offset, SDState), 705 VMSTATE_UINT8_ARRAY(data, SDState, 512), 706 VMSTATE_UNUSED_V(1, 512), 707 VMSTATE_BOOL(enable, SDState), 708 VMSTATE_END_OF_LIST() 709 }, 710 .subsections = (const VMStateDescription*[]) { 711 &sd_ocr_vmstate, 712 NULL 713 }, 714 }; 715 716 /* Legacy initialization function for use by non-qdevified callers */ 717 SDState *sd_init(BlockBackend *blk, bool is_spi) 718 { 719 Object *obj; 720 DeviceState *dev; 721 SDState *sd; 722 Error *err = NULL; 723 724 obj = object_new(TYPE_SD_CARD); 725 dev = DEVICE(obj); 726 if (!qdev_prop_set_drive_err(dev, "drive", blk, &err)) { 727 error_reportf_err(err, "sd_init failed: "); 728 return NULL; 729 } 730 qdev_prop_set_bit(dev, "spi", is_spi); 731 732 /* 733 * Realizing the device properly would put it into the QOM 734 * composition tree even though it is not plugged into an 735 * appropriate bus. That's a no-no. Hide the device from 736 * QOM/qdev, and call its qdev realize callback directly. 737 */ 738 object_ref(obj); 739 object_unparent(obj); 740 sd_realize(dev, &err); 741 if (err) { 742 error_reportf_err(err, "sd_init failed: "); 743 return NULL; 744 } 745 746 sd = SD_CARD(dev); 747 sd->me_no_qdev_me_kill_mammoth_with_rocks = true; 748 return sd; 749 } 750 751 void sd_set_cb(SDState *sd, qemu_irq readonly, qemu_irq insert) 752 { 753 sd->readonly_cb = readonly; 754 sd->inserted_cb = insert; 755 qemu_set_irq(readonly, sd->blk ? blk_is_read_only(sd->blk) : 0); 756 qemu_set_irq(insert, sd->blk ? blk_is_inserted(sd->blk) : 0); 757 } 758 759 static void sd_erase(SDState *sd) 760 { 761 int i; 762 uint64_t erase_start = sd->erase_start; 763 uint64_t erase_end = sd->erase_end; 764 765 trace_sdcard_erase(sd->erase_start, sd->erase_end); 766 if (sd->erase_start == INVALID_ADDRESS 767 || sd->erase_end == INVALID_ADDRESS) { 768 sd->card_status |= ERASE_SEQ_ERROR; 769 sd->erase_start = INVALID_ADDRESS; 770 sd->erase_end = INVALID_ADDRESS; 771 return; 772 } 773 774 if (FIELD_EX32(sd->ocr, OCR, CARD_CAPACITY)) { 775 /* High capacity memory card: erase units are 512 byte blocks */ 776 erase_start *= 512; 777 erase_end *= 512; 778 } 779 780 if (sd->erase_start > sd->size || sd->erase_end > sd->size) { 781 sd->card_status |= OUT_OF_RANGE; 782 sd->erase_start = INVALID_ADDRESS; 783 sd->erase_end = INVALID_ADDRESS; 784 return; 785 } 786 787 erase_start = sd_addr_to_wpnum(erase_start); 788 erase_end = sd_addr_to_wpnum(erase_end); 789 sd->erase_start = INVALID_ADDRESS; 790 sd->erase_end = INVALID_ADDRESS; 791 sd->csd[14] |= 0x40; 792 793 for (i = erase_start; i <= erase_end; i++) { 794 assert(i < sd->wpgrps_size); 795 if (test_bit(i, sd->wp_groups)) { 796 sd->card_status |= WP_ERASE_SKIP; 797 } 798 } 799 } 800 801 static uint32_t sd_wpbits(SDState *sd, uint64_t addr) 802 { 803 uint32_t i, wpnum; 804 uint32_t ret = 0; 805 806 wpnum = sd_addr_to_wpnum(addr); 807 808 for (i = 0; i < 32; i++, wpnum++, addr += WPGROUP_SIZE) { 809 assert(wpnum < sd->wpgrps_size); 810 if (addr < sd->size && test_bit(wpnum, sd->wp_groups)) { 811 ret |= (1 << i); 812 } 813 } 814 815 return ret; 816 } 817 818 static void sd_function_switch(SDState *sd, uint32_t arg) 819 { 820 int i, mode, new_func; 821 mode = !!(arg & 0x80000000); 822 823 sd->data[0] = 0x00; /* Maximum current consumption */ 824 sd->data[1] = 0x01; 825 sd->data[2] = 0x80; /* Supported group 6 functions */ 826 sd->data[3] = 0x01; 827 sd->data[4] = 0x80; /* Supported group 5 functions */ 828 sd->data[5] = 0x01; 829 sd->data[6] = 0x80; /* Supported group 4 functions */ 830 sd->data[7] = 0x01; 831 sd->data[8] = 0x80; /* Supported group 3 functions */ 832 sd->data[9] = 0x01; 833 sd->data[10] = 0x80; /* Supported group 2 functions */ 834 sd->data[11] = 0x43; 835 sd->data[12] = 0x80; /* Supported group 1 functions */ 836 sd->data[13] = 0x03; 837 838 memset(&sd->data[14], 0, 3); 839 for (i = 0; i < 6; i ++) { 840 new_func = (arg >> (i * 4)) & 0x0f; 841 if (mode && new_func != 0x0f) 842 sd->function_group[i] = new_func; 843 sd->data[16 - (i >> 1)] |= new_func << ((i % 2) * 4); 844 } 845 memset(&sd->data[17], 0, 47); 846 stw_be_p(sd->data + 64, sd_crc16(sd->data, 64)); 847 } 848 849 static inline bool sd_wp_addr(SDState *sd, uint64_t addr) 850 { 851 return test_bit(sd_addr_to_wpnum(addr), sd->wp_groups); 852 } 853 854 static void sd_lock_command(SDState *sd) 855 { 856 int erase, lock, clr_pwd, set_pwd, pwd_len; 857 erase = !!(sd->data[0] & 0x08); 858 lock = sd->data[0] & 0x04; 859 clr_pwd = sd->data[0] & 0x02; 860 set_pwd = sd->data[0] & 0x01; 861 862 if (sd->blk_len > 1) 863 pwd_len = sd->data[1]; 864 else 865 pwd_len = 0; 866 867 if (lock) { 868 trace_sdcard_lock(); 869 } else { 870 trace_sdcard_unlock(); 871 } 872 if (erase) { 873 if (!(sd->card_status & CARD_IS_LOCKED) || sd->blk_len > 1 || 874 set_pwd || clr_pwd || lock || sd->wp_switch || 875 (sd->csd[14] & 0x20)) { 876 sd->card_status |= LOCK_UNLOCK_FAILED; 877 return; 878 } 879 bitmap_zero(sd->wp_groups, sd->wpgrps_size); 880 sd->csd[14] &= ~0x10; 881 sd->card_status &= ~CARD_IS_LOCKED; 882 sd->pwd_len = 0; 883 /* Erasing the entire card here! */ 884 fprintf(stderr, "SD: Card force-erased by CMD42\n"); 885 return; 886 } 887 888 if (sd->blk_len < 2 + pwd_len || 889 pwd_len <= sd->pwd_len || 890 pwd_len > sd->pwd_len + 16) { 891 sd->card_status |= LOCK_UNLOCK_FAILED; 892 return; 893 } 894 895 if (sd->pwd_len && memcmp(sd->pwd, sd->data + 2, sd->pwd_len)) { 896 sd->card_status |= LOCK_UNLOCK_FAILED; 897 return; 898 } 899 900 pwd_len -= sd->pwd_len; 901 if ((pwd_len && !set_pwd) || 902 (clr_pwd && (set_pwd || lock)) || 903 (lock && !sd->pwd_len && !set_pwd) || 904 (!set_pwd && !clr_pwd && 905 (((sd->card_status & CARD_IS_LOCKED) && lock) || 906 (!(sd->card_status & CARD_IS_LOCKED) && !lock)))) { 907 sd->card_status |= LOCK_UNLOCK_FAILED; 908 return; 909 } 910 911 if (set_pwd) { 912 memcpy(sd->pwd, sd->data + 2 + sd->pwd_len, pwd_len); 913 sd->pwd_len = pwd_len; 914 } 915 916 if (clr_pwd) { 917 sd->pwd_len = 0; 918 } 919 920 if (lock) 921 sd->card_status |= CARD_IS_LOCKED; 922 else 923 sd->card_status &= ~CARD_IS_LOCKED; 924 } 925 926 static sd_rsp_type_t sd_normal_command(SDState *sd, SDRequest req) 927 { 928 uint32_t rca = 0x0000; 929 uint64_t addr = (sd->ocr & (1 << 30)) ? (uint64_t) req.arg << 9 : req.arg; 930 931 /* CMD55 precedes an ACMD, so we are not interested in tracing it. 932 * However there is no ACMD55, so we want to trace this particular case. 933 */ 934 if (req.cmd != 55 || sd->expecting_acmd) { 935 trace_sdcard_normal_command(sd->proto_name, 936 sd_cmd_name(req.cmd), req.cmd, 937 req.arg, sd_state_name(sd->state)); 938 } 939 940 /* Not interpreting this as an app command */ 941 sd->card_status &= ~APP_CMD; 942 943 if (sd_cmd_type[req.cmd] == sd_ac 944 || sd_cmd_type[req.cmd] == sd_adtc) { 945 rca = req.arg >> 16; 946 } 947 948 /* CMD23 (set block count) must be immediately followed by CMD18 or CMD25 949 * if not, its effects are cancelled */ 950 if (sd->multi_blk_cnt != 0 && !(req.cmd == 18 || req.cmd == 25)) { 951 sd->multi_blk_cnt = 0; 952 } 953 954 if (sd_cmd_class[req.cmd] == 6 && FIELD_EX32(sd->ocr, OCR, CARD_CAPACITY)) { 955 /* Only Standard Capacity cards support class 6 commands */ 956 return sd_illegal; 957 } 958 959 switch (req.cmd) { 960 /* Basic commands (Class 0 and Class 1) */ 961 case 0: /* CMD0: GO_IDLE_STATE */ 962 switch (sd->state) { 963 case sd_inactive_state: 964 return sd->spi ? sd_r1 : sd_r0; 965 966 default: 967 sd->state = sd_idle_state; 968 sd_reset(DEVICE(sd)); 969 return sd->spi ? sd_r1 : sd_r0; 970 } 971 break; 972 973 case 1: /* CMD1: SEND_OP_CMD */ 974 if (!sd->spi) 975 goto bad_cmd; 976 977 sd->state = sd_transfer_state; 978 return sd_r1; 979 980 case 2: /* CMD2: ALL_SEND_CID */ 981 if (sd->spi) 982 goto bad_cmd; 983 switch (sd->state) { 984 case sd_ready_state: 985 sd->state = sd_identification_state; 986 return sd_r2_i; 987 988 default: 989 break; 990 } 991 break; 992 993 case 3: /* CMD3: SEND_RELATIVE_ADDR */ 994 if (sd->spi) 995 goto bad_cmd; 996 switch (sd->state) { 997 case sd_identification_state: 998 case sd_standby_state: 999 sd->state = sd_standby_state; 1000 sd_set_rca(sd); 1001 return sd_r6; 1002 1003 default: 1004 break; 1005 } 1006 break; 1007 1008 case 4: /* CMD4: SEND_DSR */ 1009 if (sd->spi) 1010 goto bad_cmd; 1011 switch (sd->state) { 1012 case sd_standby_state: 1013 break; 1014 1015 default: 1016 break; 1017 } 1018 break; 1019 1020 case 5: /* CMD5: reserved for SDIO cards */ 1021 return sd_illegal; 1022 1023 case 6: /* CMD6: SWITCH_FUNCTION */ 1024 switch (sd->mode) { 1025 case sd_data_transfer_mode: 1026 sd_function_switch(sd, req.arg); 1027 sd->state = sd_sendingdata_state; 1028 sd->data_start = 0; 1029 sd->data_offset = 0; 1030 return sd_r1; 1031 1032 default: 1033 break; 1034 } 1035 break; 1036 1037 case 7: /* CMD7: SELECT/DESELECT_CARD */ 1038 if (sd->spi) 1039 goto bad_cmd; 1040 switch (sd->state) { 1041 case sd_standby_state: 1042 if (sd->rca != rca) 1043 return sd_r0; 1044 1045 sd->state = sd_transfer_state; 1046 return sd_r1b; 1047 1048 case sd_transfer_state: 1049 case sd_sendingdata_state: 1050 if (sd->rca == rca) 1051 break; 1052 1053 sd->state = sd_standby_state; 1054 return sd_r1b; 1055 1056 case sd_disconnect_state: 1057 if (sd->rca != rca) 1058 return sd_r0; 1059 1060 sd->state = sd_programming_state; 1061 return sd_r1b; 1062 1063 case sd_programming_state: 1064 if (sd->rca == rca) 1065 break; 1066 1067 sd->state = sd_disconnect_state; 1068 return sd_r1b; 1069 1070 default: 1071 break; 1072 } 1073 break; 1074 1075 case 8: /* CMD8: SEND_IF_COND */ 1076 if (sd->spec_version < SD_PHY_SPECv2_00_VERS) { 1077 break; 1078 } 1079 if (sd->state != sd_idle_state) { 1080 break; 1081 } 1082 sd->vhs = 0; 1083 1084 /* No response if not exactly one VHS bit is set. */ 1085 if (!(req.arg >> 8) || (req.arg >> (ctz32(req.arg & ~0xff) + 1))) { 1086 return sd->spi ? sd_r7 : sd_r0; 1087 } 1088 1089 /* Accept. */ 1090 sd->vhs = req.arg; 1091 return sd_r7; 1092 1093 case 9: /* CMD9: SEND_CSD */ 1094 switch (sd->state) { 1095 case sd_standby_state: 1096 if (sd->rca != rca) 1097 return sd_r0; 1098 1099 return sd_r2_s; 1100 1101 case sd_transfer_state: 1102 if (!sd->spi) 1103 break; 1104 sd->state = sd_sendingdata_state; 1105 memcpy(sd->data, sd->csd, 16); 1106 sd->data_start = addr; 1107 sd->data_offset = 0; 1108 return sd_r1; 1109 1110 default: 1111 break; 1112 } 1113 break; 1114 1115 case 10: /* CMD10: SEND_CID */ 1116 switch (sd->state) { 1117 case sd_standby_state: 1118 if (sd->rca != rca) 1119 return sd_r0; 1120 1121 return sd_r2_i; 1122 1123 case sd_transfer_state: 1124 if (!sd->spi) 1125 break; 1126 sd->state = sd_sendingdata_state; 1127 memcpy(sd->data, sd->cid, 16); 1128 sd->data_start = addr; 1129 sd->data_offset = 0; 1130 return sd_r1; 1131 1132 default: 1133 break; 1134 } 1135 break; 1136 1137 case 12: /* CMD12: STOP_TRANSMISSION */ 1138 switch (sd->state) { 1139 case sd_sendingdata_state: 1140 sd->state = sd_transfer_state; 1141 return sd_r1b; 1142 1143 case sd_receivingdata_state: 1144 sd->state = sd_programming_state; 1145 /* Bzzzzzzztt .... Operation complete. */ 1146 sd->state = sd_transfer_state; 1147 return sd_r1b; 1148 1149 default: 1150 break; 1151 } 1152 break; 1153 1154 case 13: /* CMD13: SEND_STATUS */ 1155 switch (sd->mode) { 1156 case sd_data_transfer_mode: 1157 if (sd->rca != rca) 1158 return sd_r0; 1159 1160 return sd_r1; 1161 1162 default: 1163 break; 1164 } 1165 break; 1166 1167 case 15: /* CMD15: GO_INACTIVE_STATE */ 1168 if (sd->spi) 1169 goto bad_cmd; 1170 switch (sd->mode) { 1171 case sd_data_transfer_mode: 1172 if (sd->rca != rca) 1173 return sd_r0; 1174 1175 sd->state = sd_inactive_state; 1176 return sd_r0; 1177 1178 default: 1179 break; 1180 } 1181 break; 1182 1183 /* Block read commands (Classs 2) */ 1184 case 16: /* CMD16: SET_BLOCKLEN */ 1185 switch (sd->state) { 1186 case sd_transfer_state: 1187 if (req.arg > (1 << HWBLOCK_SHIFT)) { 1188 sd->card_status |= BLOCK_LEN_ERROR; 1189 } else { 1190 trace_sdcard_set_blocklen(req.arg); 1191 sd->blk_len = req.arg; 1192 } 1193 1194 return sd_r1; 1195 1196 default: 1197 break; 1198 } 1199 break; 1200 1201 case 17: /* CMD17: READ_SINGLE_BLOCK */ 1202 switch (sd->state) { 1203 case sd_transfer_state: 1204 1205 if (addr + sd->blk_len > sd->size) { 1206 sd->card_status |= ADDRESS_ERROR; 1207 return sd_r1; 1208 } 1209 1210 sd->state = sd_sendingdata_state; 1211 sd->data_start = addr; 1212 sd->data_offset = 0; 1213 return sd_r1; 1214 1215 default: 1216 break; 1217 } 1218 break; 1219 1220 case 18: /* CMD18: READ_MULTIPLE_BLOCK */ 1221 switch (sd->state) { 1222 case sd_transfer_state: 1223 1224 if (addr + sd->blk_len > sd->size) { 1225 sd->card_status |= ADDRESS_ERROR; 1226 return sd_r1; 1227 } 1228 1229 sd->state = sd_sendingdata_state; 1230 sd->data_start = addr; 1231 sd->data_offset = 0; 1232 return sd_r1; 1233 1234 default: 1235 break; 1236 } 1237 break; 1238 1239 case 19: /* CMD19: SEND_TUNING_BLOCK (SD) */ 1240 if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { 1241 break; 1242 } 1243 if (sd->state == sd_transfer_state) { 1244 sd->state = sd_sendingdata_state; 1245 sd->data_offset = 0; 1246 return sd_r1; 1247 } 1248 break; 1249 1250 case 23: /* CMD23: SET_BLOCK_COUNT */ 1251 if (sd->spec_version < SD_PHY_SPECv3_01_VERS) { 1252 break; 1253 } 1254 switch (sd->state) { 1255 case sd_transfer_state: 1256 sd->multi_blk_cnt = req.arg; 1257 return sd_r1; 1258 1259 default: 1260 break; 1261 } 1262 break; 1263 1264 /* Block write commands (Class 4) */ 1265 case 24: /* CMD24: WRITE_SINGLE_BLOCK */ 1266 switch (sd->state) { 1267 case sd_transfer_state: 1268 /* Writing in SPI mode not implemented. */ 1269 if (sd->spi) 1270 break; 1271 1272 if (addr + sd->blk_len > sd->size) { 1273 sd->card_status |= ADDRESS_ERROR; 1274 return sd_r1; 1275 } 1276 1277 sd->state = sd_receivingdata_state; 1278 sd->data_start = addr; 1279 sd->data_offset = 0; 1280 sd->blk_written = 0; 1281 1282 if (sd_wp_addr(sd, sd->data_start)) { 1283 sd->card_status |= WP_VIOLATION; 1284 } 1285 if (sd->csd[14] & 0x30) { 1286 sd->card_status |= WP_VIOLATION; 1287 } 1288 return sd_r1; 1289 1290 default: 1291 break; 1292 } 1293 break; 1294 1295 case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ 1296 switch (sd->state) { 1297 case sd_transfer_state: 1298 /* Writing in SPI mode not implemented. */ 1299 if (sd->spi) 1300 break; 1301 1302 if (addr + sd->blk_len > sd->size) { 1303 sd->card_status |= ADDRESS_ERROR; 1304 return sd_r1; 1305 } 1306 1307 sd->state = sd_receivingdata_state; 1308 sd->data_start = addr; 1309 sd->data_offset = 0; 1310 sd->blk_written = 0; 1311 1312 if (sd_wp_addr(sd, sd->data_start)) { 1313 sd->card_status |= WP_VIOLATION; 1314 } 1315 if (sd->csd[14] & 0x30) { 1316 sd->card_status |= WP_VIOLATION; 1317 } 1318 return sd_r1; 1319 1320 default: 1321 break; 1322 } 1323 break; 1324 1325 case 26: /* CMD26: PROGRAM_CID */ 1326 if (sd->spi) 1327 goto bad_cmd; 1328 switch (sd->state) { 1329 case sd_transfer_state: 1330 sd->state = sd_receivingdata_state; 1331 sd->data_start = 0; 1332 sd->data_offset = 0; 1333 return sd_r1; 1334 1335 default: 1336 break; 1337 } 1338 break; 1339 1340 case 27: /* CMD27: PROGRAM_CSD */ 1341 switch (sd->state) { 1342 case sd_transfer_state: 1343 sd->state = sd_receivingdata_state; 1344 sd->data_start = 0; 1345 sd->data_offset = 0; 1346 return sd_r1; 1347 1348 default: 1349 break; 1350 } 1351 break; 1352 1353 /* Write protection (Class 6) */ 1354 case 28: /* CMD28: SET_WRITE_PROT */ 1355 switch (sd->state) { 1356 case sd_transfer_state: 1357 if (addr >= sd->size) { 1358 sd->card_status |= ADDRESS_ERROR; 1359 return sd_r1b; 1360 } 1361 1362 sd->state = sd_programming_state; 1363 set_bit(sd_addr_to_wpnum(addr), sd->wp_groups); 1364 /* Bzzzzzzztt .... Operation complete. */ 1365 sd->state = sd_transfer_state; 1366 return sd_r1b; 1367 1368 default: 1369 break; 1370 } 1371 break; 1372 1373 case 29: /* CMD29: CLR_WRITE_PROT */ 1374 switch (sd->state) { 1375 case sd_transfer_state: 1376 if (addr >= sd->size) { 1377 sd->card_status |= ADDRESS_ERROR; 1378 return sd_r1b; 1379 } 1380 1381 sd->state = sd_programming_state; 1382 clear_bit(sd_addr_to_wpnum(addr), sd->wp_groups); 1383 /* Bzzzzzzztt .... Operation complete. */ 1384 sd->state = sd_transfer_state; 1385 return sd_r1b; 1386 1387 default: 1388 break; 1389 } 1390 break; 1391 1392 case 30: /* CMD30: SEND_WRITE_PROT */ 1393 switch (sd->state) { 1394 case sd_transfer_state: 1395 sd->state = sd_sendingdata_state; 1396 *(uint32_t *) sd->data = sd_wpbits(sd, req.arg); 1397 sd->data_start = addr; 1398 sd->data_offset = 0; 1399 return sd_r1b; 1400 1401 default: 1402 break; 1403 } 1404 break; 1405 1406 /* Erase commands (Class 5) */ 1407 case 32: /* CMD32: ERASE_WR_BLK_START */ 1408 switch (sd->state) { 1409 case sd_transfer_state: 1410 sd->erase_start = req.arg; 1411 return sd_r1; 1412 1413 default: 1414 break; 1415 } 1416 break; 1417 1418 case 33: /* CMD33: ERASE_WR_BLK_END */ 1419 switch (sd->state) { 1420 case sd_transfer_state: 1421 sd->erase_end = req.arg; 1422 return sd_r1; 1423 1424 default: 1425 break; 1426 } 1427 break; 1428 1429 case 38: /* CMD38: ERASE */ 1430 switch (sd->state) { 1431 case sd_transfer_state: 1432 if (sd->csd[14] & 0x30) { 1433 sd->card_status |= WP_VIOLATION; 1434 return sd_r1b; 1435 } 1436 1437 sd->state = sd_programming_state; 1438 sd_erase(sd); 1439 /* Bzzzzzzztt .... Operation complete. */ 1440 sd->state = sd_transfer_state; 1441 return sd_r1b; 1442 1443 default: 1444 break; 1445 } 1446 break; 1447 1448 /* Lock card commands (Class 7) */ 1449 case 42: /* CMD42: LOCK_UNLOCK */ 1450 switch (sd->state) { 1451 case sd_transfer_state: 1452 sd->state = sd_receivingdata_state; 1453 sd->data_start = 0; 1454 sd->data_offset = 0; 1455 return sd_r1; 1456 1457 default: 1458 break; 1459 } 1460 break; 1461 1462 case 52 ... 54: 1463 /* CMD52, CMD53, CMD54: reserved for SDIO cards 1464 * (see the SDIO Simplified Specification V2.0) 1465 * Handle as illegal command but do not complain 1466 * on stderr, as some OSes may use these in their 1467 * probing for presence of an SDIO card. 1468 */ 1469 return sd_illegal; 1470 1471 /* Application specific commands (Class 8) */ 1472 case 55: /* CMD55: APP_CMD */ 1473 switch (sd->state) { 1474 case sd_ready_state: 1475 case sd_identification_state: 1476 case sd_inactive_state: 1477 return sd_illegal; 1478 case sd_idle_state: 1479 if (rca) { 1480 qemu_log_mask(LOG_GUEST_ERROR, 1481 "SD: illegal RCA 0x%04x for APP_CMD\n", req.cmd); 1482 } 1483 default: 1484 break; 1485 } 1486 if (!sd->spi) { 1487 if (sd->rca != rca) { 1488 return sd_r0; 1489 } 1490 } 1491 sd->expecting_acmd = true; 1492 sd->card_status |= APP_CMD; 1493 return sd_r1; 1494 1495 case 56: /* CMD56: GEN_CMD */ 1496 switch (sd->state) { 1497 case sd_transfer_state: 1498 sd->data_offset = 0; 1499 if (req.arg & 1) 1500 sd->state = sd_sendingdata_state; 1501 else 1502 sd->state = sd_receivingdata_state; 1503 return sd_r1; 1504 1505 default: 1506 break; 1507 } 1508 break; 1509 1510 case 58: /* CMD58: READ_OCR (SPI) */ 1511 if (!sd->spi) { 1512 goto bad_cmd; 1513 } 1514 return sd_r3; 1515 1516 case 59: /* CMD59: CRC_ON_OFF (SPI) */ 1517 if (!sd->spi) { 1518 goto bad_cmd; 1519 } 1520 goto unimplemented_spi_cmd; 1521 1522 default: 1523 bad_cmd: 1524 qemu_log_mask(LOG_GUEST_ERROR, "SD: Unknown CMD%i\n", req.cmd); 1525 return sd_illegal; 1526 1527 unimplemented_spi_cmd: 1528 /* Commands that are recognised but not yet implemented in SPI mode. */ 1529 qemu_log_mask(LOG_UNIMP, "SD: CMD%i not implemented in SPI mode\n", 1530 req.cmd); 1531 return sd_illegal; 1532 } 1533 1534 qemu_log_mask(LOG_GUEST_ERROR, "SD: CMD%i in a wrong state\n", req.cmd); 1535 return sd_illegal; 1536 } 1537 1538 static sd_rsp_type_t sd_app_command(SDState *sd, 1539 SDRequest req) 1540 { 1541 trace_sdcard_app_command(sd->proto_name, sd_acmd_name(req.cmd), 1542 req.cmd, req.arg, sd_state_name(sd->state)); 1543 sd->card_status |= APP_CMD; 1544 switch (req.cmd) { 1545 case 6: /* ACMD6: SET_BUS_WIDTH */ 1546 if (sd->spi) { 1547 goto unimplemented_spi_cmd; 1548 } 1549 switch (sd->state) { 1550 case sd_transfer_state: 1551 sd->sd_status[0] &= 0x3f; 1552 sd->sd_status[0] |= (req.arg & 0x03) << 6; 1553 return sd_r1; 1554 1555 default: 1556 break; 1557 } 1558 break; 1559 1560 case 13: /* ACMD13: SD_STATUS */ 1561 switch (sd->state) { 1562 case sd_transfer_state: 1563 sd->state = sd_sendingdata_state; 1564 sd->data_start = 0; 1565 sd->data_offset = 0; 1566 return sd_r1; 1567 1568 default: 1569 break; 1570 } 1571 break; 1572 1573 case 22: /* ACMD22: SEND_NUM_WR_BLOCKS */ 1574 switch (sd->state) { 1575 case sd_transfer_state: 1576 *(uint32_t *) sd->data = sd->blk_written; 1577 1578 sd->state = sd_sendingdata_state; 1579 sd->data_start = 0; 1580 sd->data_offset = 0; 1581 return sd_r1; 1582 1583 default: 1584 break; 1585 } 1586 break; 1587 1588 case 23: /* ACMD23: SET_WR_BLK_ERASE_COUNT */ 1589 switch (sd->state) { 1590 case sd_transfer_state: 1591 return sd_r1; 1592 1593 default: 1594 break; 1595 } 1596 break; 1597 1598 case 41: /* ACMD41: SD_APP_OP_COND */ 1599 if (sd->spi) { 1600 /* SEND_OP_CMD */ 1601 sd->state = sd_transfer_state; 1602 return sd_r1; 1603 } 1604 if (sd->state != sd_idle_state) { 1605 break; 1606 } 1607 /* If it's the first ACMD41 since reset, we need to decide 1608 * whether to power up. If this is not an enquiry ACMD41, 1609 * we immediately report power on and proceed below to the 1610 * ready state, but if it is, we set a timer to model a 1611 * delay for power up. This works around a bug in EDK2 1612 * UEFI, which sends an initial enquiry ACMD41, but 1613 * assumes that the card is in ready state as soon as it 1614 * sees the power up bit set. */ 1615 if (!FIELD_EX32(sd->ocr, OCR, CARD_POWER_UP)) { 1616 if ((req.arg & ACMD41_ENQUIRY_MASK) != 0) { 1617 timer_del(sd->ocr_power_timer); 1618 sd_ocr_powerup(sd); 1619 } else { 1620 trace_sdcard_inquiry_cmd41(); 1621 if (!timer_pending(sd->ocr_power_timer)) { 1622 timer_mod_ns(sd->ocr_power_timer, 1623 (qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) 1624 + OCR_POWER_DELAY_NS)); 1625 } 1626 } 1627 } 1628 1629 if (FIELD_EX32(sd->ocr & req.arg, OCR, VDD_VOLTAGE_WINDOW)) { 1630 /* We accept any voltage. 10000 V is nothing. 1631 * 1632 * Once we're powered up, we advance straight to ready state 1633 * unless it's an enquiry ACMD41 (bits 23:0 == 0). 1634 */ 1635 sd->state = sd_ready_state; 1636 } 1637 1638 return sd_r3; 1639 1640 case 42: /* ACMD42: SET_CLR_CARD_DETECT */ 1641 switch (sd->state) { 1642 case sd_transfer_state: 1643 /* Bringing in the 50KOhm pull-up resistor... Done. */ 1644 return sd_r1; 1645 1646 default: 1647 break; 1648 } 1649 break; 1650 1651 case 51: /* ACMD51: SEND_SCR */ 1652 switch (sd->state) { 1653 case sd_transfer_state: 1654 sd->state = sd_sendingdata_state; 1655 sd->data_start = 0; 1656 sd->data_offset = 0; 1657 return sd_r1; 1658 1659 default: 1660 break; 1661 } 1662 break; 1663 1664 case 18: /* Reserved for SD security applications */ 1665 case 25: 1666 case 26: 1667 case 38: 1668 case 43 ... 49: 1669 /* Refer to the "SD Specifications Part3 Security Specification" for 1670 * information about the SD Security Features. 1671 */ 1672 qemu_log_mask(LOG_UNIMP, "SD: CMD%i Security not implemented\n", 1673 req.cmd); 1674 return sd_illegal; 1675 1676 default: 1677 /* Fall back to standard commands. */ 1678 return sd_normal_command(sd, req); 1679 1680 unimplemented_spi_cmd: 1681 /* Commands that are recognised but not yet implemented in SPI mode. */ 1682 qemu_log_mask(LOG_UNIMP, "SD: CMD%i not implemented in SPI mode\n", 1683 req.cmd); 1684 return sd_illegal; 1685 } 1686 1687 qemu_log_mask(LOG_GUEST_ERROR, "SD: ACMD%i in a wrong state\n", req.cmd); 1688 return sd_illegal; 1689 } 1690 1691 static int cmd_valid_while_locked(SDState *sd, const uint8_t cmd) 1692 { 1693 /* Valid commands in locked state: 1694 * basic class (0) 1695 * lock card class (7) 1696 * CMD16 1697 * implicitly, the ACMD prefix CMD55 1698 * ACMD41 and ACMD42 1699 * Anything else provokes an "illegal command" response. 1700 */ 1701 if (sd->expecting_acmd) { 1702 return cmd == 41 || cmd == 42; 1703 } 1704 if (cmd == 16 || cmd == 55) { 1705 return 1; 1706 } 1707 return sd_cmd_class[cmd] == 0 || sd_cmd_class[cmd] == 7; 1708 } 1709 1710 int sd_do_command(SDState *sd, SDRequest *req, 1711 uint8_t *response) { 1712 int last_state; 1713 sd_rsp_type_t rtype; 1714 int rsplen; 1715 1716 if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) { 1717 return 0; 1718 } 1719 1720 if (sd_req_crc_validate(req)) { 1721 sd->card_status |= COM_CRC_ERROR; 1722 rtype = sd_illegal; 1723 goto send_response; 1724 } 1725 1726 if (req->cmd >= SDMMC_CMD_MAX) { 1727 qemu_log_mask(LOG_GUEST_ERROR, "SD: incorrect command 0x%02x\n", 1728 req->cmd); 1729 req->cmd &= 0x3f; 1730 } 1731 1732 if (sd->card_status & CARD_IS_LOCKED) { 1733 if (!cmd_valid_while_locked(sd, req->cmd)) { 1734 sd->card_status |= ILLEGAL_COMMAND; 1735 sd->expecting_acmd = false; 1736 qemu_log_mask(LOG_GUEST_ERROR, "SD: Card is locked\n"); 1737 rtype = sd_illegal; 1738 goto send_response; 1739 } 1740 } 1741 1742 last_state = sd->state; 1743 sd_set_mode(sd); 1744 1745 if (sd->expecting_acmd) { 1746 sd->expecting_acmd = false; 1747 rtype = sd_app_command(sd, *req); 1748 } else { 1749 rtype = sd_normal_command(sd, *req); 1750 } 1751 1752 if (rtype == sd_illegal) { 1753 sd->card_status |= ILLEGAL_COMMAND; 1754 } else { 1755 /* Valid command, we can update the 'state before command' bits. 1756 * (Do this now so they appear in r1 responses.) 1757 */ 1758 sd->current_cmd = req->cmd; 1759 sd->card_status &= ~CURRENT_STATE; 1760 sd->card_status |= (last_state << 9); 1761 } 1762 1763 send_response: 1764 switch (rtype) { 1765 case sd_r1: 1766 case sd_r1b: 1767 sd_response_r1_make(sd, response); 1768 rsplen = 4; 1769 break; 1770 1771 case sd_r2_i: 1772 memcpy(response, sd->cid, sizeof(sd->cid)); 1773 rsplen = 16; 1774 break; 1775 1776 case sd_r2_s: 1777 memcpy(response, sd->csd, sizeof(sd->csd)); 1778 rsplen = 16; 1779 break; 1780 1781 case sd_r3: 1782 sd_response_r3_make(sd, response); 1783 rsplen = 4; 1784 break; 1785 1786 case sd_r6: 1787 sd_response_r6_make(sd, response); 1788 rsplen = 4; 1789 break; 1790 1791 case sd_r7: 1792 sd_response_r7_make(sd, response); 1793 rsplen = 4; 1794 break; 1795 1796 case sd_r0: 1797 case sd_illegal: 1798 rsplen = 0; 1799 break; 1800 default: 1801 g_assert_not_reached(); 1802 } 1803 trace_sdcard_response(sd_response_name(rtype), rsplen); 1804 1805 if (rtype != sd_illegal) { 1806 /* Clear the "clear on valid command" status bits now we've 1807 * sent any response 1808 */ 1809 sd->card_status &= ~CARD_STATUS_B; 1810 } 1811 1812 #ifdef DEBUG_SD 1813 qemu_hexdump(stderr, "Response", response, rsplen); 1814 #endif 1815 1816 return rsplen; 1817 } 1818 1819 static void sd_blk_read(SDState *sd, uint64_t addr, uint32_t len) 1820 { 1821 trace_sdcard_read_block(addr, len); 1822 if (!sd->blk || blk_pread(sd->blk, addr, sd->data, len) < 0) { 1823 fprintf(stderr, "sd_blk_read: read error on host side\n"); 1824 } 1825 } 1826 1827 static void sd_blk_write(SDState *sd, uint64_t addr, uint32_t len) 1828 { 1829 trace_sdcard_write_block(addr, len); 1830 if (!sd->blk || blk_pwrite(sd->blk, addr, sd->data, len, 0) < 0) { 1831 fprintf(stderr, "sd_blk_write: write error on host side\n"); 1832 } 1833 } 1834 1835 #define BLK_READ_BLOCK(a, len) sd_blk_read(sd, a, len) 1836 #define BLK_WRITE_BLOCK(a, len) sd_blk_write(sd, a, len) 1837 #define APP_READ_BLOCK(a, len) memset(sd->data, 0xec, len) 1838 #define APP_WRITE_BLOCK(a, len) 1839 1840 void sd_write_byte(SDState *sd, uint8_t value) 1841 { 1842 int i; 1843 1844 if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) 1845 return; 1846 1847 if (sd->state != sd_receivingdata_state) { 1848 qemu_log_mask(LOG_GUEST_ERROR, 1849 "%s: not in Receiving-Data state\n", __func__); 1850 return; 1851 } 1852 1853 if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION)) 1854 return; 1855 1856 trace_sdcard_write_data(sd->proto_name, 1857 sd_acmd_name(sd->current_cmd), 1858 sd->current_cmd, value); 1859 switch (sd->current_cmd) { 1860 case 24: /* CMD24: WRITE_SINGLE_BLOCK */ 1861 sd->data[sd->data_offset ++] = value; 1862 if (sd->data_offset >= sd->blk_len) { 1863 /* TODO: Check CRC before committing */ 1864 sd->state = sd_programming_state; 1865 BLK_WRITE_BLOCK(sd->data_start, sd->data_offset); 1866 sd->blk_written ++; 1867 sd->csd[14] |= 0x40; 1868 /* Bzzzzzzztt .... Operation complete. */ 1869 sd->state = sd_transfer_state; 1870 } 1871 break; 1872 1873 case 25: /* CMD25: WRITE_MULTIPLE_BLOCK */ 1874 if (sd->data_offset == 0) { 1875 /* Start of the block - let's check the address is valid */ 1876 if (sd->data_start + sd->blk_len > sd->size) { 1877 sd->card_status |= ADDRESS_ERROR; 1878 break; 1879 } 1880 if (sd_wp_addr(sd, sd->data_start)) { 1881 sd->card_status |= WP_VIOLATION; 1882 break; 1883 } 1884 } 1885 sd->data[sd->data_offset++] = value; 1886 if (sd->data_offset >= sd->blk_len) { 1887 /* TODO: Check CRC before committing */ 1888 sd->state = sd_programming_state; 1889 BLK_WRITE_BLOCK(sd->data_start, sd->data_offset); 1890 sd->blk_written++; 1891 sd->data_start += sd->blk_len; 1892 sd->data_offset = 0; 1893 sd->csd[14] |= 0x40; 1894 1895 /* Bzzzzzzztt .... Operation complete. */ 1896 if (sd->multi_blk_cnt != 0) { 1897 if (--sd->multi_blk_cnt == 0) { 1898 /* Stop! */ 1899 sd->state = sd_transfer_state; 1900 break; 1901 } 1902 } 1903 1904 sd->state = sd_receivingdata_state; 1905 } 1906 break; 1907 1908 case 26: /* CMD26: PROGRAM_CID */ 1909 sd->data[sd->data_offset ++] = value; 1910 if (sd->data_offset >= sizeof(sd->cid)) { 1911 /* TODO: Check CRC before committing */ 1912 sd->state = sd_programming_state; 1913 for (i = 0; i < sizeof(sd->cid); i ++) 1914 if ((sd->cid[i] | 0x00) != sd->data[i]) 1915 sd->card_status |= CID_CSD_OVERWRITE; 1916 1917 if (!(sd->card_status & CID_CSD_OVERWRITE)) 1918 for (i = 0; i < sizeof(sd->cid); i ++) { 1919 sd->cid[i] |= 0x00; 1920 sd->cid[i] &= sd->data[i]; 1921 } 1922 /* Bzzzzzzztt .... Operation complete. */ 1923 sd->state = sd_transfer_state; 1924 } 1925 break; 1926 1927 case 27: /* CMD27: PROGRAM_CSD */ 1928 sd->data[sd->data_offset ++] = value; 1929 if (sd->data_offset >= sizeof(sd->csd)) { 1930 /* TODO: Check CRC before committing */ 1931 sd->state = sd_programming_state; 1932 for (i = 0; i < sizeof(sd->csd); i ++) 1933 if ((sd->csd[i] | sd_csd_rw_mask[i]) != 1934 (sd->data[i] | sd_csd_rw_mask[i])) 1935 sd->card_status |= CID_CSD_OVERWRITE; 1936 1937 /* Copy flag (OTP) & Permanent write protect */ 1938 if (sd->csd[14] & ~sd->data[14] & 0x60) 1939 sd->card_status |= CID_CSD_OVERWRITE; 1940 1941 if (!(sd->card_status & CID_CSD_OVERWRITE)) 1942 for (i = 0; i < sizeof(sd->csd); i ++) { 1943 sd->csd[i] |= sd_csd_rw_mask[i]; 1944 sd->csd[i] &= sd->data[i]; 1945 } 1946 /* Bzzzzzzztt .... Operation complete. */ 1947 sd->state = sd_transfer_state; 1948 } 1949 break; 1950 1951 case 42: /* CMD42: LOCK_UNLOCK */ 1952 sd->data[sd->data_offset ++] = value; 1953 if (sd->data_offset >= sd->blk_len) { 1954 /* TODO: Check CRC before committing */ 1955 sd->state = sd_programming_state; 1956 sd_lock_command(sd); 1957 /* Bzzzzzzztt .... Operation complete. */ 1958 sd->state = sd_transfer_state; 1959 } 1960 break; 1961 1962 case 56: /* CMD56: GEN_CMD */ 1963 sd->data[sd->data_offset ++] = value; 1964 if (sd->data_offset >= sd->blk_len) { 1965 APP_WRITE_BLOCK(sd->data_start, sd->data_offset); 1966 sd->state = sd_transfer_state; 1967 } 1968 break; 1969 1970 default: 1971 qemu_log_mask(LOG_GUEST_ERROR, "%s: unknown command\n", __func__); 1972 break; 1973 } 1974 } 1975 1976 #define SD_TUNING_BLOCK_SIZE 64 1977 1978 static const uint8_t sd_tuning_block_pattern[SD_TUNING_BLOCK_SIZE] = { 1979 /* See: Physical Layer Simplified Specification Version 3.01, Table 4-2 */ 1980 0xff, 0x0f, 0xff, 0x00, 0x0f, 0xfc, 0xc3, 0xcc, 1981 0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef, 1982 0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb, 1983 0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef, 1984 0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c, 1985 0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee, 1986 0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff, 1987 0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde, 1988 }; 1989 1990 uint8_t sd_read_byte(SDState *sd) 1991 { 1992 /* TODO: Append CRCs */ 1993 uint8_t ret; 1994 uint32_t io_len; 1995 1996 if (!sd->blk || !blk_is_inserted(sd->blk) || !sd->enable) 1997 return 0x00; 1998 1999 if (sd->state != sd_sendingdata_state) { 2000 qemu_log_mask(LOG_GUEST_ERROR, 2001 "%s: not in Sending-Data state\n", __func__); 2002 return 0x00; 2003 } 2004 2005 if (sd->card_status & (ADDRESS_ERROR | WP_VIOLATION)) 2006 return 0x00; 2007 2008 io_len = (sd->ocr & (1 << 30)) ? 512 : sd->blk_len; 2009 2010 trace_sdcard_read_data(sd->proto_name, 2011 sd_acmd_name(sd->current_cmd), 2012 sd->current_cmd, io_len); 2013 switch (sd->current_cmd) { 2014 case 6: /* CMD6: SWITCH_FUNCTION */ 2015 ret = sd->data[sd->data_offset ++]; 2016 2017 if (sd->data_offset >= 64) 2018 sd->state = sd_transfer_state; 2019 break; 2020 2021 case 9: /* CMD9: SEND_CSD */ 2022 case 10: /* CMD10: SEND_CID */ 2023 ret = sd->data[sd->data_offset ++]; 2024 2025 if (sd->data_offset >= 16) 2026 sd->state = sd_transfer_state; 2027 break; 2028 2029 case 13: /* ACMD13: SD_STATUS */ 2030 ret = sd->sd_status[sd->data_offset ++]; 2031 2032 if (sd->data_offset >= sizeof(sd->sd_status)) 2033 sd->state = sd_transfer_state; 2034 break; 2035 2036 case 17: /* CMD17: READ_SINGLE_BLOCK */ 2037 if (sd->data_offset == 0) 2038 BLK_READ_BLOCK(sd->data_start, io_len); 2039 ret = sd->data[sd->data_offset ++]; 2040 2041 if (sd->data_offset >= io_len) 2042 sd->state = sd_transfer_state; 2043 break; 2044 2045 case 18: /* CMD18: READ_MULTIPLE_BLOCK */ 2046 if (sd->data_offset == 0) { 2047 if (sd->data_start + io_len > sd->size) { 2048 sd->card_status |= ADDRESS_ERROR; 2049 return 0x00; 2050 } 2051 BLK_READ_BLOCK(sd->data_start, io_len); 2052 } 2053 ret = sd->data[sd->data_offset ++]; 2054 2055 if (sd->data_offset >= io_len) { 2056 sd->data_start += io_len; 2057 sd->data_offset = 0; 2058 2059 if (sd->multi_blk_cnt != 0) { 2060 if (--sd->multi_blk_cnt == 0) { 2061 /* Stop! */ 2062 sd->state = sd_transfer_state; 2063 break; 2064 } 2065 } 2066 } 2067 break; 2068 2069 case 19: /* CMD19: SEND_TUNING_BLOCK (SD) */ 2070 if (sd->data_offset >= SD_TUNING_BLOCK_SIZE - 1) { 2071 sd->state = sd_transfer_state; 2072 } 2073 ret = sd_tuning_block_pattern[sd->data_offset++]; 2074 break; 2075 2076 case 22: /* ACMD22: SEND_NUM_WR_BLOCKS */ 2077 ret = sd->data[sd->data_offset ++]; 2078 2079 if (sd->data_offset >= 4) 2080 sd->state = sd_transfer_state; 2081 break; 2082 2083 case 30: /* CMD30: SEND_WRITE_PROT */ 2084 ret = sd->data[sd->data_offset ++]; 2085 2086 if (sd->data_offset >= 4) 2087 sd->state = sd_transfer_state; 2088 break; 2089 2090 case 51: /* ACMD51: SEND_SCR */ 2091 ret = sd->scr[sd->data_offset ++]; 2092 2093 if (sd->data_offset >= sizeof(sd->scr)) 2094 sd->state = sd_transfer_state; 2095 break; 2096 2097 case 56: /* CMD56: GEN_CMD */ 2098 if (sd->data_offset == 0) 2099 APP_READ_BLOCK(sd->data_start, sd->blk_len); 2100 ret = sd->data[sd->data_offset ++]; 2101 2102 if (sd->data_offset >= sd->blk_len) 2103 sd->state = sd_transfer_state; 2104 break; 2105 2106 default: 2107 qemu_log_mask(LOG_GUEST_ERROR, "%s: unknown command\n", __func__); 2108 return 0x00; 2109 } 2110 2111 return ret; 2112 } 2113 2114 static bool sd_data_ready(SDState *sd) 2115 { 2116 return sd->state == sd_sendingdata_state; 2117 } 2118 2119 void sd_enable(SDState *sd, bool enable) 2120 { 2121 sd->enable = enable; 2122 } 2123 2124 static void sd_instance_init(Object *obj) 2125 { 2126 SDState *sd = SD_CARD(obj); 2127 2128 sd->enable = true; 2129 sd->ocr_power_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, sd_ocr_powerup, sd); 2130 } 2131 2132 static void sd_instance_finalize(Object *obj) 2133 { 2134 SDState *sd = SD_CARD(obj); 2135 2136 timer_free(sd->ocr_power_timer); 2137 } 2138 2139 static void sd_realize(DeviceState *dev, Error **errp) 2140 { 2141 SDState *sd = SD_CARD(dev); 2142 int ret; 2143 2144 sd->proto_name = sd->spi ? "SPI" : "SD"; 2145 2146 switch (sd->spec_version) { 2147 case SD_PHY_SPECv1_10_VERS 2148 ... SD_PHY_SPECv3_01_VERS: 2149 break; 2150 default: 2151 error_setg(errp, "Invalid SD card Spec version: %u", sd->spec_version); 2152 return; 2153 } 2154 2155 if (sd->blk) { 2156 int64_t blk_size; 2157 2158 if (blk_is_read_only(sd->blk)) { 2159 error_setg(errp, "Cannot use read-only drive as SD card"); 2160 return; 2161 } 2162 2163 blk_size = blk_getlength(sd->blk); 2164 if (blk_size > 0 && !is_power_of_2(blk_size)) { 2165 int64_t blk_size_aligned = pow2ceil(blk_size); 2166 char *blk_size_str; 2167 2168 blk_size_str = size_to_str(blk_size); 2169 error_setg(errp, "Invalid SD card size: %s", blk_size_str); 2170 g_free(blk_size_str); 2171 2172 blk_size_str = size_to_str(blk_size_aligned); 2173 error_append_hint(errp, 2174 "SD card size has to be a power of 2, e.g. %s.\n" 2175 "You can resize disk images with" 2176 " 'qemu-img resize <imagefile> <new-size>'\n" 2177 "(note that this will lose data if you make the" 2178 " image smaller than it currently is).\n", 2179 blk_size_str); 2180 g_free(blk_size_str); 2181 2182 return; 2183 } 2184 2185 ret = blk_set_perm(sd->blk, BLK_PERM_CONSISTENT_READ | BLK_PERM_WRITE, 2186 BLK_PERM_ALL, errp); 2187 if (ret < 0) { 2188 return; 2189 } 2190 blk_set_dev_ops(sd->blk, &sd_block_ops, sd); 2191 } 2192 } 2193 2194 static Property sd_properties[] = { 2195 DEFINE_PROP_UINT8("spec_version", SDState, 2196 spec_version, SD_PHY_SPECv2_00_VERS), 2197 DEFINE_PROP_DRIVE("drive", SDState, blk), 2198 /* We do not model the chip select pin, so allow the board to select 2199 * whether card should be in SSI or MMC/SD mode. It is also up to the 2200 * board to ensure that ssi transfers only occur when the chip select 2201 * is asserted. */ 2202 DEFINE_PROP_BOOL("spi", SDState, spi, false), 2203 DEFINE_PROP_END_OF_LIST() 2204 }; 2205 2206 static void sd_class_init(ObjectClass *klass, void *data) 2207 { 2208 DeviceClass *dc = DEVICE_CLASS(klass); 2209 SDCardClass *sc = SD_CARD_CLASS(klass); 2210 2211 dc->realize = sd_realize; 2212 device_class_set_props(dc, sd_properties); 2213 dc->vmsd = &sd_vmstate; 2214 dc->reset = sd_reset; 2215 dc->bus_type = TYPE_SD_BUS; 2216 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 2217 2218 sc->set_voltage = sd_set_voltage; 2219 sc->get_dat_lines = sd_get_dat_lines; 2220 sc->get_cmd_line = sd_get_cmd_line; 2221 sc->do_command = sd_do_command; 2222 sc->write_byte = sd_write_byte; 2223 sc->read_byte = sd_read_byte; 2224 sc->data_ready = sd_data_ready; 2225 sc->enable = sd_enable; 2226 sc->get_inserted = sd_get_inserted; 2227 sc->get_readonly = sd_get_readonly; 2228 } 2229 2230 static const TypeInfo sd_info = { 2231 .name = TYPE_SD_CARD, 2232 .parent = TYPE_DEVICE, 2233 .instance_size = sizeof(SDState), 2234 .class_size = sizeof(SDCardClass), 2235 .class_init = sd_class_init, 2236 .instance_init = sd_instance_init, 2237 .instance_finalize = sd_instance_finalize, 2238 }; 2239 2240 static void sd_register_types(void) 2241 { 2242 type_register_static(&sd_info); 2243 } 2244 2245 type_init(sd_register_types) 2246