1 /* 2 * Intel XScale PXA255/270 MultiMediaCard/SD/SDIO Controller emulation. 3 * 4 * Copyright (c) 2006 Openedhand Ltd. 5 * Written by Andrzej Zaborowski <balrog@zabor.org> 6 * 7 * This code is licensed under the GPLv2. 8 * 9 * Contributions after 2012-01-13 are licensed under the terms of the 10 * GNU GPL, version 2 or (at your option) any later version. 11 */ 12 13 #include "qemu/osdep.h" 14 #include "qapi/error.h" 15 #include "hw/irq.h" 16 #include "hw/sysbus.h" 17 #include "migration/vmstate.h" 18 #include "hw/arm/pxa.h" 19 #include "hw/sd/sd.h" 20 #include "hw/qdev-properties.h" 21 #include "qemu/error-report.h" 22 #include "qemu/log.h" 23 #include "qemu/module.h" 24 #include "trace.h" 25 26 #define TYPE_PXA2XX_MMCI "pxa2xx-mmci" 27 #define PXA2XX_MMCI(obj) OBJECT_CHECK(PXA2xxMMCIState, (obj), TYPE_PXA2XX_MMCI) 28 29 #define TYPE_PXA2XX_MMCI_BUS "pxa2xx-mmci-bus" 30 #define PXA2XX_MMCI_BUS(obj) OBJECT_CHECK(SDBus, (obj), TYPE_PXA2XX_MMCI_BUS) 31 32 struct PXA2xxMMCIState { 33 SysBusDevice parent_obj; 34 35 MemoryRegion iomem; 36 qemu_irq irq; 37 qemu_irq rx_dma; 38 qemu_irq tx_dma; 39 qemu_irq inserted; 40 qemu_irq readonly; 41 42 BlockBackend *blk; 43 SDBus sdbus; 44 45 uint32_t status; 46 uint32_t clkrt; 47 uint32_t spi; 48 uint32_t cmdat; 49 uint32_t resp_tout; 50 uint32_t read_tout; 51 int32_t blklen; 52 int32_t numblk; 53 uint32_t intmask; 54 uint32_t intreq; 55 int32_t cmd; 56 uint32_t arg; 57 58 int32_t active; 59 int32_t bytesleft; 60 uint8_t tx_fifo[64]; 61 uint32_t tx_start; 62 uint32_t tx_len; 63 uint8_t rx_fifo[32]; 64 uint32_t rx_start; 65 uint32_t rx_len; 66 uint16_t resp_fifo[9]; 67 uint32_t resp_len; 68 69 int32_t cmdreq; 70 }; 71 72 static bool pxa2xx_mmci_vmstate_validate(void *opaque, int version_id) 73 { 74 PXA2xxMMCIState *s = opaque; 75 76 return s->tx_start < ARRAY_SIZE(s->tx_fifo) 77 && s->rx_start < ARRAY_SIZE(s->rx_fifo) 78 && s->tx_len <= ARRAY_SIZE(s->tx_fifo) 79 && s->rx_len <= ARRAY_SIZE(s->rx_fifo) 80 && s->resp_len <= ARRAY_SIZE(s->resp_fifo); 81 } 82 83 84 static const VMStateDescription vmstate_pxa2xx_mmci = { 85 .name = "pxa2xx-mmci", 86 .version_id = 2, 87 .minimum_version_id = 2, 88 .fields = (VMStateField[]) { 89 VMSTATE_UINT32(status, PXA2xxMMCIState), 90 VMSTATE_UINT32(clkrt, PXA2xxMMCIState), 91 VMSTATE_UINT32(spi, PXA2xxMMCIState), 92 VMSTATE_UINT32(cmdat, PXA2xxMMCIState), 93 VMSTATE_UINT32(resp_tout, PXA2xxMMCIState), 94 VMSTATE_UINT32(read_tout, PXA2xxMMCIState), 95 VMSTATE_INT32(blklen, PXA2xxMMCIState), 96 VMSTATE_INT32(numblk, PXA2xxMMCIState), 97 VMSTATE_UINT32(intmask, PXA2xxMMCIState), 98 VMSTATE_UINT32(intreq, PXA2xxMMCIState), 99 VMSTATE_INT32(cmd, PXA2xxMMCIState), 100 VMSTATE_UINT32(arg, PXA2xxMMCIState), 101 VMSTATE_INT32(cmdreq, PXA2xxMMCIState), 102 VMSTATE_INT32(active, PXA2xxMMCIState), 103 VMSTATE_INT32(bytesleft, PXA2xxMMCIState), 104 VMSTATE_UINT32(tx_start, PXA2xxMMCIState), 105 VMSTATE_UINT32(tx_len, PXA2xxMMCIState), 106 VMSTATE_UINT32(rx_start, PXA2xxMMCIState), 107 VMSTATE_UINT32(rx_len, PXA2xxMMCIState), 108 VMSTATE_UINT32(resp_len, PXA2xxMMCIState), 109 VMSTATE_VALIDATE("fifo size incorrect", pxa2xx_mmci_vmstate_validate), 110 VMSTATE_UINT8_ARRAY(tx_fifo, PXA2xxMMCIState, 64), 111 VMSTATE_UINT8_ARRAY(rx_fifo, PXA2xxMMCIState, 32), 112 VMSTATE_UINT16_ARRAY(resp_fifo, PXA2xxMMCIState, 9), 113 VMSTATE_END_OF_LIST() 114 } 115 }; 116 117 #define MMC_STRPCL 0x00 /* MMC Clock Start/Stop register */ 118 #define MMC_STAT 0x04 /* MMC Status register */ 119 #define MMC_CLKRT 0x08 /* MMC Clock Rate register */ 120 #define MMC_SPI 0x0c /* MMC SPI Mode register */ 121 #define MMC_CMDAT 0x10 /* MMC Command/Data register */ 122 #define MMC_RESTO 0x14 /* MMC Response Time-Out register */ 123 #define MMC_RDTO 0x18 /* MMC Read Time-Out register */ 124 #define MMC_BLKLEN 0x1c /* MMC Block Length register */ 125 #define MMC_NUMBLK 0x20 /* MMC Number of Blocks register */ 126 #define MMC_PRTBUF 0x24 /* MMC Buffer Partly Full register */ 127 #define MMC_I_MASK 0x28 /* MMC Interrupt Mask register */ 128 #define MMC_I_REG 0x2c /* MMC Interrupt Request register */ 129 #define MMC_CMD 0x30 /* MMC Command register */ 130 #define MMC_ARGH 0x34 /* MMC Argument High register */ 131 #define MMC_ARGL 0x38 /* MMC Argument Low register */ 132 #define MMC_RES 0x3c /* MMC Response FIFO */ 133 #define MMC_RXFIFO 0x40 /* MMC Receive FIFO */ 134 #define MMC_TXFIFO 0x44 /* MMC Transmit FIFO */ 135 #define MMC_RDWAIT 0x48 /* MMC RD_WAIT register */ 136 #define MMC_BLKS_REM 0x4c /* MMC Blocks Remaining register */ 137 138 /* Bitfield masks */ 139 #define STRPCL_STOP_CLK (1 << 0) 140 #define STRPCL_STRT_CLK (1 << 1) 141 #define STAT_TOUT_RES (1 << 1) 142 #define STAT_CLK_EN (1 << 8) 143 #define STAT_DATA_DONE (1 << 11) 144 #define STAT_PRG_DONE (1 << 12) 145 #define STAT_END_CMDRES (1 << 13) 146 #define SPI_SPI_MODE (1 << 0) 147 #define CMDAT_RES_TYPE (3 << 0) 148 #define CMDAT_DATA_EN (1 << 2) 149 #define CMDAT_WR_RD (1 << 3) 150 #define CMDAT_DMA_EN (1 << 7) 151 #define CMDAT_STOP_TRAN (1 << 10) 152 #define INT_DATA_DONE (1 << 0) 153 #define INT_PRG_DONE (1 << 1) 154 #define INT_END_CMD (1 << 2) 155 #define INT_STOP_CMD (1 << 3) 156 #define INT_CLK_OFF (1 << 4) 157 #define INT_RXFIFO_REQ (1 << 5) 158 #define INT_TXFIFO_REQ (1 << 6) 159 #define INT_TINT (1 << 7) 160 #define INT_DAT_ERR (1 << 8) 161 #define INT_RES_ERR (1 << 9) 162 #define INT_RD_STALLED (1 << 10) 163 #define INT_SDIO_INT (1 << 11) 164 #define INT_SDIO_SACK (1 << 12) 165 #define PRTBUF_PRT_BUF (1 << 0) 166 167 /* Route internal interrupt lines to the global IC and DMA */ 168 static void pxa2xx_mmci_int_update(PXA2xxMMCIState *s) 169 { 170 uint32_t mask = s->intmask; 171 if (s->cmdat & CMDAT_DMA_EN) { 172 mask |= INT_RXFIFO_REQ | INT_TXFIFO_REQ; 173 174 qemu_set_irq(s->rx_dma, !!(s->intreq & INT_RXFIFO_REQ)); 175 qemu_set_irq(s->tx_dma, !!(s->intreq & INT_TXFIFO_REQ)); 176 } 177 178 qemu_set_irq(s->irq, !!(s->intreq & ~mask)); 179 } 180 181 static void pxa2xx_mmci_fifo_update(PXA2xxMMCIState *s) 182 { 183 if (!s->active) 184 return; 185 186 if (s->cmdat & CMDAT_WR_RD) { 187 while (s->bytesleft && s->tx_len) { 188 sdbus_write_data(&s->sdbus, s->tx_fifo[s->tx_start++]); 189 s->tx_start &= 0x1f; 190 s->tx_len --; 191 s->bytesleft --; 192 } 193 if (s->bytesleft) 194 s->intreq |= INT_TXFIFO_REQ; 195 } else 196 while (s->bytesleft && s->rx_len < 32) { 197 s->rx_fifo[(s->rx_start + (s->rx_len ++)) & 0x1f] = 198 sdbus_read_data(&s->sdbus); 199 s->bytesleft --; 200 s->intreq |= INT_RXFIFO_REQ; 201 } 202 203 if (!s->bytesleft) { 204 s->active = 0; 205 s->intreq |= INT_DATA_DONE; 206 s->status |= STAT_DATA_DONE; 207 208 if (s->cmdat & CMDAT_WR_RD) { 209 s->intreq |= INT_PRG_DONE; 210 s->status |= STAT_PRG_DONE; 211 } 212 } 213 214 pxa2xx_mmci_int_update(s); 215 } 216 217 static void pxa2xx_mmci_wakequeues(PXA2xxMMCIState *s) 218 { 219 int rsplen, i; 220 SDRequest request; 221 uint8_t response[16]; 222 223 s->active = 1; 224 s->rx_len = 0; 225 s->tx_len = 0; 226 s->cmdreq = 0; 227 228 request.cmd = s->cmd; 229 request.arg = s->arg; 230 request.crc = 0; /* FIXME */ 231 232 rsplen = sdbus_do_command(&s->sdbus, &request, response); 233 s->intreq |= INT_END_CMD; 234 235 memset(s->resp_fifo, 0, sizeof(s->resp_fifo)); 236 switch (s->cmdat & CMDAT_RES_TYPE) { 237 #define PXAMMCI_RESP(wd, value0, value1) \ 238 s->resp_fifo[(wd) + 0] |= (value0); \ 239 s->resp_fifo[(wd) + 1] |= (value1) << 8; 240 case 0: /* No response */ 241 goto complete; 242 243 case 1: /* R1, R4, R5 or R6 */ 244 if (rsplen < 4) 245 goto timeout; 246 goto complete; 247 248 case 2: /* R2 */ 249 if (rsplen < 16) 250 goto timeout; 251 goto complete; 252 253 case 3: /* R3 */ 254 if (rsplen < 4) 255 goto timeout; 256 goto complete; 257 258 complete: 259 for (i = 0; rsplen > 0; i ++, rsplen -= 2) { 260 PXAMMCI_RESP(i, response[i * 2], response[i * 2 + 1]); 261 } 262 s->status |= STAT_END_CMDRES; 263 264 if (!(s->cmdat & CMDAT_DATA_EN)) 265 s->active = 0; 266 else 267 s->bytesleft = s->numblk * s->blklen; 268 269 s->resp_len = 0; 270 break; 271 272 timeout: 273 s->active = 0; 274 s->status |= STAT_TOUT_RES; 275 break; 276 } 277 278 pxa2xx_mmci_fifo_update(s); 279 } 280 281 static uint64_t pxa2xx_mmci_read(void *opaque, hwaddr offset, unsigned size) 282 { 283 PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque; 284 uint32_t ret = 0; 285 286 switch (offset) { 287 case MMC_STRPCL: 288 break; 289 case MMC_STAT: 290 ret = s->status; 291 break; 292 case MMC_CLKRT: 293 ret = s->clkrt; 294 break; 295 case MMC_SPI: 296 ret = s->spi; 297 break; 298 case MMC_CMDAT: 299 ret = s->cmdat; 300 break; 301 case MMC_RESTO: 302 ret = s->resp_tout; 303 break; 304 case MMC_RDTO: 305 ret = s->read_tout; 306 break; 307 case MMC_BLKLEN: 308 ret = s->blklen; 309 break; 310 case MMC_NUMBLK: 311 ret = s->numblk; 312 break; 313 case MMC_PRTBUF: 314 break; 315 case MMC_I_MASK: 316 ret = s->intmask; 317 break; 318 case MMC_I_REG: 319 ret = s->intreq; 320 break; 321 case MMC_CMD: 322 ret = s->cmd | 0x40; 323 break; 324 case MMC_ARGH: 325 ret = s->arg >> 16; 326 break; 327 case MMC_ARGL: 328 ret = s->arg & 0xffff; 329 break; 330 case MMC_RES: 331 ret = (s->resp_len < 9) ? s->resp_fifo[s->resp_len++] : 0; 332 break; 333 case MMC_RXFIFO: 334 while (size-- && s->rx_len) { 335 ret |= s->rx_fifo[s->rx_start++] << (size << 3); 336 s->rx_start &= 0x1f; 337 s->rx_len --; 338 } 339 s->intreq &= ~INT_RXFIFO_REQ; 340 pxa2xx_mmci_fifo_update(s); 341 break; 342 case MMC_RDWAIT: 343 break; 344 case MMC_BLKS_REM: 345 ret = s->numblk; 346 break; 347 default: 348 qemu_log_mask(LOG_GUEST_ERROR, 349 "%s: incorrect register 0x%02" HWADDR_PRIx "\n", 350 __func__, offset); 351 } 352 trace_pxa2xx_mmci_read(size, offset, ret); 353 354 return ret; 355 } 356 357 static void pxa2xx_mmci_write(void *opaque, 358 hwaddr offset, uint64_t value, unsigned size) 359 { 360 PXA2xxMMCIState *s = (PXA2xxMMCIState *) opaque; 361 362 trace_pxa2xx_mmci_write(size, offset, value); 363 switch (offset) { 364 case MMC_STRPCL: 365 if (value & STRPCL_STRT_CLK) { 366 s->status |= STAT_CLK_EN; 367 s->intreq &= ~INT_CLK_OFF; 368 369 if (s->cmdreq && !(s->cmdat & CMDAT_STOP_TRAN)) { 370 s->status &= STAT_CLK_EN; 371 pxa2xx_mmci_wakequeues(s); 372 } 373 } 374 375 if (value & STRPCL_STOP_CLK) { 376 s->status &= ~STAT_CLK_EN; 377 s->intreq |= INT_CLK_OFF; 378 s->active = 0; 379 } 380 381 pxa2xx_mmci_int_update(s); 382 break; 383 384 case MMC_CLKRT: 385 s->clkrt = value & 7; 386 break; 387 388 case MMC_SPI: 389 s->spi = value & 0xf; 390 if (value & SPI_SPI_MODE) { 391 qemu_log_mask(LOG_GUEST_ERROR, 392 "%s: attempted to use card in SPI mode\n", __func__); 393 } 394 break; 395 396 case MMC_CMDAT: 397 s->cmdat = value & 0x3dff; 398 s->active = 0; 399 s->cmdreq = 1; 400 if (!(value & CMDAT_STOP_TRAN)) { 401 s->status &= STAT_CLK_EN; 402 403 if (s->status & STAT_CLK_EN) 404 pxa2xx_mmci_wakequeues(s); 405 } 406 407 pxa2xx_mmci_int_update(s); 408 break; 409 410 case MMC_RESTO: 411 s->resp_tout = value & 0x7f; 412 break; 413 414 case MMC_RDTO: 415 s->read_tout = value & 0xffff; 416 break; 417 418 case MMC_BLKLEN: 419 s->blklen = value & 0xfff; 420 break; 421 422 case MMC_NUMBLK: 423 s->numblk = value & 0xffff; 424 break; 425 426 case MMC_PRTBUF: 427 if (value & PRTBUF_PRT_BUF) { 428 s->tx_start ^= 32; 429 s->tx_len = 0; 430 } 431 pxa2xx_mmci_fifo_update(s); 432 break; 433 434 case MMC_I_MASK: 435 s->intmask = value & 0x1fff; 436 pxa2xx_mmci_int_update(s); 437 break; 438 439 case MMC_CMD: 440 s->cmd = value & 0x3f; 441 break; 442 443 case MMC_ARGH: 444 s->arg &= 0x0000ffff; 445 s->arg |= value << 16; 446 break; 447 448 case MMC_ARGL: 449 s->arg &= 0xffff0000; 450 s->arg |= value & 0x0000ffff; 451 break; 452 453 case MMC_TXFIFO: 454 while (size-- && s->tx_len < 0x20) 455 s->tx_fifo[(s->tx_start + (s->tx_len ++)) & 0x1f] = 456 (value >> (size << 3)) & 0xff; 457 s->intreq &= ~INT_TXFIFO_REQ; 458 pxa2xx_mmci_fifo_update(s); 459 break; 460 461 case MMC_RDWAIT: 462 case MMC_BLKS_REM: 463 break; 464 465 default: 466 qemu_log_mask(LOG_GUEST_ERROR, 467 "%s: incorrect reg 0x%02" HWADDR_PRIx " " 468 "(value 0x%08" PRIx64 ")\n", __func__, offset, value); 469 } 470 } 471 472 static const MemoryRegionOps pxa2xx_mmci_ops = { 473 .read = pxa2xx_mmci_read, 474 .write = pxa2xx_mmci_write, 475 .endianness = DEVICE_NATIVE_ENDIAN, 476 }; 477 478 PXA2xxMMCIState *pxa2xx_mmci_init(MemoryRegion *sysmem, 479 hwaddr base, 480 BlockBackend *blk, qemu_irq irq, 481 qemu_irq rx_dma, qemu_irq tx_dma) 482 { 483 DeviceState *dev, *carddev; 484 SysBusDevice *sbd; 485 PXA2xxMMCIState *s; 486 Error *err = NULL; 487 488 dev = qdev_create(NULL, TYPE_PXA2XX_MMCI); 489 s = PXA2XX_MMCI(dev); 490 sbd = SYS_BUS_DEVICE(dev); 491 sysbus_mmio_map(sbd, 0, base); 492 sysbus_connect_irq(sbd, 0, irq); 493 qdev_connect_gpio_out_named(dev, "rx-dma", 0, rx_dma); 494 qdev_connect_gpio_out_named(dev, "tx-dma", 0, tx_dma); 495 496 /* Create and plug in the sd card */ 497 carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD_CARD); 498 qdev_prop_set_drive(carddev, "drive", blk, &err); 499 if (err) { 500 error_reportf_err(err, "failed to init SD card: "); 501 return NULL; 502 } 503 object_property_set_bool(OBJECT(carddev), true, "realized", &err); 504 if (err) { 505 error_reportf_err(err, "failed to init SD card: "); 506 return NULL; 507 } 508 509 return s; 510 } 511 512 static void pxa2xx_mmci_set_inserted(DeviceState *dev, bool inserted) 513 { 514 PXA2xxMMCIState *s = PXA2XX_MMCI(dev); 515 516 qemu_set_irq(s->inserted, inserted); 517 } 518 519 static void pxa2xx_mmci_set_readonly(DeviceState *dev, bool readonly) 520 { 521 PXA2xxMMCIState *s = PXA2XX_MMCI(dev); 522 523 qemu_set_irq(s->readonly, readonly); 524 } 525 526 void pxa2xx_mmci_handlers(PXA2xxMMCIState *s, qemu_irq readonly, 527 qemu_irq coverswitch) 528 { 529 DeviceState *dev = DEVICE(s); 530 531 s->readonly = readonly; 532 s->inserted = coverswitch; 533 534 pxa2xx_mmci_set_inserted(dev, sdbus_get_inserted(&s->sdbus)); 535 pxa2xx_mmci_set_readonly(dev, sdbus_get_readonly(&s->sdbus)); 536 } 537 538 static void pxa2xx_mmci_reset(DeviceState *d) 539 { 540 PXA2xxMMCIState *s = PXA2XX_MMCI(d); 541 542 s->status = 0; 543 s->clkrt = 0; 544 s->spi = 0; 545 s->cmdat = 0; 546 s->resp_tout = 0; 547 s->read_tout = 0; 548 s->blklen = 0; 549 s->numblk = 0; 550 s->intmask = 0; 551 s->intreq = 0; 552 s->cmd = 0; 553 s->arg = 0; 554 s->active = 0; 555 s->bytesleft = 0; 556 s->tx_start = 0; 557 s->tx_len = 0; 558 s->rx_start = 0; 559 s->rx_len = 0; 560 s->resp_len = 0; 561 s->cmdreq = 0; 562 memset(s->tx_fifo, 0, sizeof(s->tx_fifo)); 563 memset(s->rx_fifo, 0, sizeof(s->rx_fifo)); 564 memset(s->resp_fifo, 0, sizeof(s->resp_fifo)); 565 } 566 567 static void pxa2xx_mmci_instance_init(Object *obj) 568 { 569 PXA2xxMMCIState *s = PXA2XX_MMCI(obj); 570 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 571 DeviceState *dev = DEVICE(obj); 572 573 memory_region_init_io(&s->iomem, obj, &pxa2xx_mmci_ops, s, 574 "pxa2xx-mmci", 0x00100000); 575 sysbus_init_mmio(sbd, &s->iomem); 576 sysbus_init_irq(sbd, &s->irq); 577 qdev_init_gpio_out_named(dev, &s->rx_dma, "rx-dma", 1); 578 qdev_init_gpio_out_named(dev, &s->tx_dma, "tx-dma", 1); 579 580 qbus_create_inplace(&s->sdbus, sizeof(s->sdbus), 581 TYPE_PXA2XX_MMCI_BUS, DEVICE(obj), "sd-bus"); 582 } 583 584 static void pxa2xx_mmci_class_init(ObjectClass *klass, void *data) 585 { 586 DeviceClass *dc = DEVICE_CLASS(klass); 587 588 dc->vmsd = &vmstate_pxa2xx_mmci; 589 dc->reset = pxa2xx_mmci_reset; 590 } 591 592 static void pxa2xx_mmci_bus_class_init(ObjectClass *klass, void *data) 593 { 594 SDBusClass *sbc = SD_BUS_CLASS(klass); 595 596 sbc->set_inserted = pxa2xx_mmci_set_inserted; 597 sbc->set_readonly = pxa2xx_mmci_set_readonly; 598 } 599 600 static const TypeInfo pxa2xx_mmci_info = { 601 .name = TYPE_PXA2XX_MMCI, 602 .parent = TYPE_SYS_BUS_DEVICE, 603 .instance_size = sizeof(PXA2xxMMCIState), 604 .instance_init = pxa2xx_mmci_instance_init, 605 .class_init = pxa2xx_mmci_class_init, 606 }; 607 608 static const TypeInfo pxa2xx_mmci_bus_info = { 609 .name = TYPE_PXA2XX_MMCI_BUS, 610 .parent = TYPE_SD_BUS, 611 .instance_size = sizeof(SDBus), 612 .class_init = pxa2xx_mmci_bus_class_init, 613 }; 614 615 static void pxa2xx_mmci_register_types(void) 616 { 617 type_register_static(&pxa2xx_mmci_info); 618 type_register_static(&pxa2xx_mmci_bus_info); 619 } 620 621 type_init(pxa2xx_mmci_register_types) 622