1 /* 2 * VMware PVSCSI header file 3 * 4 * Copyright (C) 2008-2009, VMware, Inc. All Rights Reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify it 7 * under the terms of the GNU General Public License as published by the 8 * Free Software Foundation; version 2 of the License and no later version. 9 * 10 * This program is distributed in the hope that it will be useful, but 11 * WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or 13 * NON INFRINGEMENT. See the GNU General Public License for more 14 * details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA. 19 * 20 * Maintained by: Arvind Kumar <arvindkumar@vmware.com> 21 * 22 */ 23 24 #ifndef VMW_PVSCSI_H 25 #define VMW_PVSCSI_H 26 27 #define VMW_PAGE_SIZE (4096) 28 #define VMW_PAGE_SHIFT (12) 29 30 #define MASK(n) ((1 << (n)) - 1) /* make an n-bit mask */ 31 32 /* 33 * host adapter status/error codes 34 */ 35 enum HostBusAdapterStatus { 36 BTSTAT_SUCCESS = 0x00, /* CCB complete normally with no errors */ 37 BTSTAT_LINKED_COMMAND_COMPLETED = 0x0a, 38 BTSTAT_LINKED_COMMAND_COMPLETED_WITH_FLAG = 0x0b, 39 BTSTAT_DATA_UNDERRUN = 0x0c, 40 BTSTAT_SELTIMEO = 0x11, /* SCSI selection timeout */ 41 BTSTAT_DATARUN = 0x12, /* data overrun/underrun */ 42 BTSTAT_BUSFREE = 0x13, /* unexpected bus free */ 43 BTSTAT_INVPHASE = 0x14, /* invalid bus phase or sequence */ 44 /* requested by target */ 45 BTSTAT_LUNMISMATCH = 0x17, /* linked CCB has different LUN */ 46 /* from first CCB */ 47 BTSTAT_SENSFAILED = 0x1b, /* auto request sense failed */ 48 BTSTAT_TAGREJECT = 0x1c, /* SCSI II tagged queueing message */ 49 /* rejected by target */ 50 BTSTAT_BADMSG = 0x1d, /* unsupported message received by */ 51 /* the host adapter */ 52 BTSTAT_HAHARDWARE = 0x20, /* host adapter hardware failed */ 53 BTSTAT_NORESPONSE = 0x21, /* target did not respond to SCSI ATN, */ 54 /* sent a SCSI RST */ 55 BTSTAT_SENTRST = 0x22, /* host adapter asserted a SCSI RST */ 56 BTSTAT_RECVRST = 0x23, /* other SCSI devices asserted a SCSI RST */ 57 BTSTAT_DISCONNECT = 0x24, /* target device reconnected improperly */ 58 /* (w/o tag) */ 59 BTSTAT_BUSRESET = 0x25, /* host adapter issued BUS device reset */ 60 BTSTAT_ABORTQUEUE = 0x26, /* abort queue generated */ 61 BTSTAT_HASOFTWARE = 0x27, /* host adapter software error */ 62 BTSTAT_HATIMEOUT = 0x30, /* host adapter hardware timeout error */ 63 BTSTAT_SCSIPARITY = 0x34, /* SCSI parity error detected */ 64 }; 65 66 /* 67 * Register offsets. 68 * 69 * These registers are accessible both via i/o space and mm i/o. 70 */ 71 72 enum PVSCSIRegOffset { 73 PVSCSI_REG_OFFSET_COMMAND = 0x0, 74 PVSCSI_REG_OFFSET_COMMAND_DATA = 0x4, 75 PVSCSI_REG_OFFSET_COMMAND_STATUS = 0x8, 76 PVSCSI_REG_OFFSET_LAST_STS_0 = 0x100, 77 PVSCSI_REG_OFFSET_LAST_STS_1 = 0x104, 78 PVSCSI_REG_OFFSET_LAST_STS_2 = 0x108, 79 PVSCSI_REG_OFFSET_LAST_STS_3 = 0x10c, 80 PVSCSI_REG_OFFSET_INTR_STATUS = 0x100c, 81 PVSCSI_REG_OFFSET_INTR_MASK = 0x2010, 82 PVSCSI_REG_OFFSET_KICK_NON_RW_IO = 0x3014, 83 PVSCSI_REG_OFFSET_DEBUG = 0x3018, 84 PVSCSI_REG_OFFSET_KICK_RW_IO = 0x4018, 85 }; 86 87 /* 88 * Virtual h/w commands. 89 */ 90 91 enum PVSCSICommands { 92 PVSCSI_CMD_FIRST = 0, /* has to be first */ 93 94 PVSCSI_CMD_ADAPTER_RESET = 1, 95 PVSCSI_CMD_ISSUE_SCSI = 2, 96 PVSCSI_CMD_SETUP_RINGS = 3, 97 PVSCSI_CMD_RESET_BUS = 4, 98 PVSCSI_CMD_RESET_DEVICE = 5, 99 PVSCSI_CMD_ABORT_CMD = 6, 100 PVSCSI_CMD_CONFIG = 7, 101 PVSCSI_CMD_SETUP_MSG_RING = 8, 102 PVSCSI_CMD_DEVICE_UNPLUG = 9, 103 104 PVSCSI_CMD_LAST = 10 /* has to be last */ 105 }; 106 107 #define PVSCSI_COMMAND_PROCESSING_SUCCEEDED (0) 108 #define PVSCSI_COMMAND_PROCESSING_FAILED (-1) 109 #define PVSCSI_COMMAND_NOT_ENOUGH_DATA (-2) 110 111 /* 112 * Command descriptor for PVSCSI_CMD_RESET_DEVICE -- 113 */ 114 115 struct PVSCSICmdDescResetDevice { 116 uint32_t target; 117 uint8_t lun[8]; 118 } QEMU_PACKED; 119 120 typedef struct PVSCSICmdDescResetDevice PVSCSICmdDescResetDevice; 121 122 /* 123 * Command descriptor for PVSCSI_CMD_ABORT_CMD -- 124 * 125 * - currently does not support specifying the LUN. 126 * - pad should be 0. 127 */ 128 129 struct PVSCSICmdDescAbortCmd { 130 uint64_t context; 131 uint32_t target; 132 uint32_t pad; 133 } QEMU_PACKED; 134 135 typedef struct PVSCSICmdDescAbortCmd PVSCSICmdDescAbortCmd; 136 137 /* 138 * Command descriptor for PVSCSI_CMD_SETUP_RINGS -- 139 * 140 * Notes: 141 * - reqRingNumPages and cmpRingNumPages need to be power of two. 142 * - reqRingNumPages and cmpRingNumPages need to be different from 0, 143 * - reqRingNumPages and cmpRingNumPages need to be inferior to 144 * PVSCSI_SETUP_RINGS_MAX_NUM_PAGES. 145 */ 146 147 #define PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 32 148 struct PVSCSICmdDescSetupRings { 149 uint32_t reqRingNumPages; 150 uint32_t cmpRingNumPages; 151 uint64_t ringsStatePPN; 152 uint64_t reqRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 153 uint64_t cmpRingPPNs[PVSCSI_SETUP_RINGS_MAX_NUM_PAGES]; 154 } QEMU_PACKED; 155 156 typedef struct PVSCSICmdDescSetupRings PVSCSICmdDescSetupRings; 157 158 /* 159 * Command descriptor for PVSCSI_CMD_SETUP_MSG_RING -- 160 * 161 * Notes: 162 * - this command was not supported in the initial revision of the h/w 163 * interface. Before using it, you need to check that it is supported by 164 * writing PVSCSI_CMD_SETUP_MSG_RING to the 'command' register, then 165 * immediately after read the 'command status' register: 166 * * a value of -1 means that the cmd is NOT supported, 167 * * a value != -1 means that the cmd IS supported. 168 * If it's supported the 'command status' register should return: 169 * sizeof(PVSCSICmdDescSetupMsgRing) / sizeof(uint32_t). 170 * - this command should be issued _after_ the usual SETUP_RINGS so that the 171 * RingsState page is already setup. If not, the command is a nop. 172 * - numPages needs to be a power of two, 173 * - numPages needs to be different from 0, 174 * - pad should be zero. 175 */ 176 177 #define PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 16 178 179 struct PVSCSICmdDescSetupMsgRing { 180 uint32_t numPages; 181 uint32_t pad; 182 uint64_t ringPPNs[PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES]; 183 } QEMU_PACKED; 184 185 typedef struct PVSCSICmdDescSetupMsgRing PVSCSICmdDescSetupMsgRing; 186 187 enum PVSCSIMsgType { 188 PVSCSI_MSG_DEV_ADDED = 0, 189 PVSCSI_MSG_DEV_REMOVED = 1, 190 PVSCSI_MSG_LAST = 2, 191 }; 192 193 /* 194 * Msg descriptor. 195 * 196 * sizeof(struct PVSCSIRingMsgDesc) == 128. 197 * 198 * - type is of type enum PVSCSIMsgType. 199 * - the content of args depend on the type of event being delivered. 200 */ 201 202 struct PVSCSIRingMsgDesc { 203 uint32_t type; 204 uint32_t args[31]; 205 } QEMU_PACKED; 206 207 typedef struct PVSCSIRingMsgDesc PVSCSIRingMsgDesc; 208 209 struct PVSCSIMsgDescDevStatusChanged { 210 uint32_t type; /* PVSCSI_MSG_DEV _ADDED / _REMOVED */ 211 uint32_t bus; 212 uint32_t target; 213 uint8_t lun[8]; 214 uint32_t pad[27]; 215 } QEMU_PACKED; 216 217 typedef struct PVSCSIMsgDescDevStatusChanged PVSCSIMsgDescDevStatusChanged; 218 219 /* 220 * Rings state. 221 * 222 * - the fields: 223 * . msgProdIdx, 224 * . msgConsIdx, 225 * . msgNumEntriesLog2, 226 * .. are only used once the SETUP_MSG_RING cmd has been issued. 227 * - 'pad' helps to ensure that the msg related fields are on their own 228 * cache-line. 229 */ 230 231 struct PVSCSIRingsState { 232 uint32_t reqProdIdx; 233 uint32_t reqConsIdx; 234 uint32_t reqNumEntriesLog2; 235 236 uint32_t cmpProdIdx; 237 uint32_t cmpConsIdx; 238 uint32_t cmpNumEntriesLog2; 239 240 uint8_t pad[104]; 241 242 uint32_t msgProdIdx; 243 uint32_t msgConsIdx; 244 uint32_t msgNumEntriesLog2; 245 } QEMU_PACKED; 246 247 typedef struct PVSCSIRingsState PVSCSIRingsState; 248 249 /* 250 * Request descriptor. 251 * 252 * sizeof(RingReqDesc) = 128 253 * 254 * - context: is a unique identifier of a command. It could normally be any 255 * 64bit value, however we currently store it in the serialNumber variable 256 * of struct SCSI_Command, so we have the following restrictions due to the 257 * way this field is handled in the vmkernel storage stack: 258 * * this value can't be 0, 259 * * the upper 32bit need to be 0 since serialNumber is as a uint32_t. 260 * Currently tracked as PR 292060. 261 * - dataLen: contains the total number of bytes that need to be transferred. 262 * - dataAddr: 263 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is set: dataAddr is the PA of the first 264 * s/g table segment, each s/g segment is entirely contained on a single 265 * page of physical memory, 266 * * if PVSCSI_FLAG_CMD_WITH_SG_LIST is NOT set, then dataAddr is the PA of 267 * the buffer used for the DMA transfer, 268 * - flags: 269 * * PVSCSI_FLAG_CMD_WITH_SG_LIST: see dataAddr above, 270 * * PVSCSI_FLAG_CMD_DIR_NONE: no DMA involved, 271 * * PVSCSI_FLAG_CMD_DIR_TOHOST: transfer from device to main memory, 272 * * PVSCSI_FLAG_CMD_DIR_TODEVICE: transfer from main memory to device, 273 * * PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB: reserved to handle CDBs larger than 274 * 16bytes. To be specified. 275 * - vcpuHint: vcpuId of the processor that will be most likely waiting for the 276 * completion of the i/o. For guest OSes that use lowest priority message 277 * delivery mode (such as windows), we use this "hint" to deliver the 278 * completion action to the proper vcpu. For now, we can use the vcpuId of 279 * the processor that initiated the i/o as a likely candidate for the vcpu 280 * that will be waiting for the completion.. 281 * - bus should be 0: we currently only support bus 0 for now. 282 * - unused should be zero'd. 283 */ 284 285 #define PVSCSI_FLAG_CMD_WITH_SG_LIST (1 << 0) 286 #define PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB (1 << 1) 287 #define PVSCSI_FLAG_CMD_DIR_NONE (1 << 2) 288 #define PVSCSI_FLAG_CMD_DIR_TOHOST (1 << 3) 289 #define PVSCSI_FLAG_CMD_DIR_TODEVICE (1 << 4) 290 291 #define PVSCSI_KNOWN_FLAGS \ 292 (PVSCSI_FLAG_CMD_WITH_SG_LIST | \ 293 PVSCSI_FLAG_CMD_OUT_OF_BAND_CDB | \ 294 PVSCSI_FLAG_CMD_DIR_NONE | \ 295 PVSCSI_FLAG_CMD_DIR_TOHOST | \ 296 PVSCSI_FLAG_CMD_DIR_TODEVICE) 297 298 struct PVSCSIRingReqDesc { 299 uint64_t context; 300 uint64_t dataAddr; 301 uint64_t dataLen; 302 uint64_t senseAddr; 303 uint32_t senseLen; 304 uint32_t flags; 305 uint8_t cdb[16]; 306 uint8_t cdbLen; 307 uint8_t lun[8]; 308 uint8_t tag; 309 uint8_t bus; 310 uint8_t target; 311 uint8_t vcpuHint; 312 uint8_t unused[59]; 313 } QEMU_PACKED; 314 315 typedef struct PVSCSIRingReqDesc PVSCSIRingReqDesc; 316 317 /* 318 * Scatter-gather list management. 319 * 320 * As described above, when PVSCSI_FLAG_CMD_WITH_SG_LIST is set in the 321 * RingReqDesc.flags, then RingReqDesc.dataAddr is the PA of the first s/g 322 * table segment. 323 * 324 * - each segment of the s/g table contain a succession of struct 325 * PVSCSISGElement. 326 * - each segment is entirely contained on a single physical page of memory. 327 * - a "chain" s/g element has the flag PVSCSI_SGE_FLAG_CHAIN_ELEMENT set in 328 * PVSCSISGElement.flags and in this case: 329 * * addr is the PA of the next s/g segment, 330 * * length is undefined, assumed to be 0. 331 */ 332 333 struct PVSCSISGElement { 334 uint64_t addr; 335 uint32_t length; 336 uint32_t flags; 337 } QEMU_PACKED; 338 339 typedef struct PVSCSISGElement PVSCSISGElement; 340 341 /* 342 * Completion descriptor. 343 * 344 * sizeof(RingCmpDesc) = 32 345 * 346 * - context: identifier of the command. The same thing that was specified 347 * under "context" as part of struct RingReqDesc at initiation time, 348 * - dataLen: number of bytes transferred for the actual i/o operation, 349 * - senseLen: number of bytes written into the sense buffer, 350 * - hostStatus: adapter status, 351 * - scsiStatus: device status, 352 * - pad should be zero. 353 */ 354 355 struct PVSCSIRingCmpDesc { 356 uint64_t context; 357 uint64_t dataLen; 358 uint32_t senseLen; 359 uint16_t hostStatus; 360 uint16_t scsiStatus; 361 uint32_t pad[2]; 362 } QEMU_PACKED; 363 364 typedef struct PVSCSIRingCmpDesc PVSCSIRingCmpDesc; 365 366 /* 367 * Interrupt status / IRQ bits. 368 */ 369 370 #define PVSCSI_INTR_CMPL_0 (1 << 0) 371 #define PVSCSI_INTR_CMPL_1 (1 << 1) 372 #define PVSCSI_INTR_CMPL_MASK MASK(2) 373 374 #define PVSCSI_INTR_MSG_0 (1 << 2) 375 #define PVSCSI_INTR_MSG_1 (1 << 3) 376 #define PVSCSI_INTR_MSG_MASK (MASK(2) << 2) 377 378 #define PVSCSI_INTR_ALL_SUPPORTED MASK(4) 379 380 /* 381 * Number of MSI-X vectors supported. 382 */ 383 #define PVSCSI_MAX_INTRS 24 384 385 /* 386 * Enumeration of supported MSI-X vectors 387 */ 388 #define PVSCSI_VECTOR_COMPLETION 0 389 390 /* 391 * Misc constants for the rings. 392 */ 393 394 #define PVSCSI_MAX_NUM_PAGES_REQ_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 395 #define PVSCSI_MAX_NUM_PAGES_CMP_RING PVSCSI_SETUP_RINGS_MAX_NUM_PAGES 396 #define PVSCSI_MAX_NUM_PAGES_MSG_RING PVSCSI_SETUP_MSG_RING_MAX_NUM_PAGES 397 398 #define PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE \ 399 (VMW_PAGE_SIZE / sizeof(struct PVSCSIRingReqDesc)) 400 401 #define PVSCSI_MAX_NUM_CMP_ENTRIES_PER_PAGE \ 402 (VMW_PAGE_SIZE / sizeof(PVSCSIRingCmpDesc)) 403 404 #define PVSCSI_MAX_NUM_MSG_ENTRIES_PER_PAGE \ 405 (VMW_PAGE_SIZE / sizeof(PVSCSIRingMsgDesc)) 406 407 #define PVSCSI_MAX_REQ_QUEUE_DEPTH \ 408 (PVSCSI_MAX_NUM_PAGES_REQ_RING * PVSCSI_MAX_NUM_REQ_ENTRIES_PER_PAGE) 409 410 #define PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES 1 411 #define PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES 1 412 #define PVSCSI_MEM_SPACE_MISC_NUM_PAGES 2 413 #define PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES 2 414 #define PVSCSI_MEM_SPACE_MSIX_NUM_PAGES 2 415 416 enum PVSCSIMemSpace { 417 PVSCSI_MEM_SPACE_COMMAND_PAGE = 0, 418 PVSCSI_MEM_SPACE_INTR_STATUS_PAGE = 1, 419 PVSCSI_MEM_SPACE_MISC_PAGE = 2, 420 PVSCSI_MEM_SPACE_KICK_IO_PAGE = 4, 421 PVSCSI_MEM_SPACE_MSIX_TABLE_PAGE = 6, 422 PVSCSI_MEM_SPACE_MSIX_PBA_PAGE = 7, 423 }; 424 425 #define PVSCSI_MEM_SPACE_NUM_PAGES \ 426 (PVSCSI_MEM_SPACE_COMMAND_NUM_PAGES + \ 427 PVSCSI_MEM_SPACE_INTR_STATUS_NUM_PAGES + \ 428 PVSCSI_MEM_SPACE_MISC_NUM_PAGES + \ 429 PVSCSI_MEM_SPACE_KICK_IO_NUM_PAGES + \ 430 PVSCSI_MEM_SPACE_MSIX_NUM_PAGES) 431 432 #define PVSCSI_MEM_SPACE_SIZE (PVSCSI_MEM_SPACE_NUM_PAGES * VMW_PAGE_SIZE) 433 434 #endif /* VMW_PVSCSI_H */ 435