1 /* 2 * vhost_scsi host device 3 * 4 * Copyright IBM, Corp. 2011 5 * 6 * Authors: 7 * Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> 8 * 9 * Changes for QEMU mainline + tcm_vhost kernel upstream: 10 * Nicholas Bellinger <nab@risingtidesystems.com> 11 * 12 * This work is licensed under the terms of the GNU LGPL, version 2 or later. 13 * See the COPYING.LIB file in the top-level directory. 14 * 15 */ 16 17 #include "qemu/osdep.h" 18 #include <linux/vhost.h> 19 #include <sys/ioctl.h> 20 #include "qapi/error.h" 21 #include "qemu/error-report.h" 22 #include "qemu/module.h" 23 #include "monitor/monitor.h" 24 #include "migration/blocker.h" 25 #include "hw/virtio/vhost-scsi.h" 26 #include "hw/virtio/vhost.h" 27 #include "hw/virtio/virtio-scsi.h" 28 #include "hw/virtio/virtio-bus.h" 29 #include "hw/fw-path-provider.h" 30 #include "hw/qdev-properties.h" 31 #include "qemu/cutils.h" 32 #include "sysemu/sysemu.h" 33 34 /* Features supported by host kernel. */ 35 static const int kernel_feature_bits[] = { 36 VIRTIO_F_NOTIFY_ON_EMPTY, 37 VIRTIO_RING_F_INDIRECT_DESC, 38 VIRTIO_RING_F_EVENT_IDX, 39 VIRTIO_SCSI_F_HOTPLUG, 40 VIRTIO_F_RING_RESET, 41 VHOST_INVALID_FEATURE_BIT 42 }; 43 44 static int vhost_scsi_set_endpoint(VHostSCSI *s) 45 { 46 VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s); 47 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 48 const VhostOps *vhost_ops = vsc->dev.vhost_ops; 49 struct vhost_scsi_target backend; 50 int ret; 51 52 memset(&backend, 0, sizeof(backend)); 53 pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->conf.wwpn); 54 ret = vhost_ops->vhost_scsi_set_endpoint(&vsc->dev, &backend); 55 if (ret < 0) { 56 return -errno; 57 } 58 return 0; 59 } 60 61 static void vhost_scsi_clear_endpoint(VHostSCSI *s) 62 { 63 VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(s); 64 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 65 struct vhost_scsi_target backend; 66 const VhostOps *vhost_ops = vsc->dev.vhost_ops; 67 68 memset(&backend, 0, sizeof(backend)); 69 pstrcpy(backend.vhost_wwpn, sizeof(backend.vhost_wwpn), vs->conf.wwpn); 70 vhost_ops->vhost_scsi_clear_endpoint(&vsc->dev, &backend); 71 } 72 73 static int vhost_scsi_start(VHostSCSI *s) 74 { 75 int ret, abi_version; 76 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 77 const VhostOps *vhost_ops = vsc->dev.vhost_ops; 78 Error *local_err = NULL; 79 80 ret = vhost_ops->vhost_scsi_get_abi_version(&vsc->dev, &abi_version); 81 if (ret < 0) { 82 return -errno; 83 } 84 if (abi_version > VHOST_SCSI_ABI_VERSION) { 85 error_report("vhost-scsi: The running tcm_vhost kernel abi_version:" 86 " %d is greater than vhost_scsi userspace supports: %d," 87 " please upgrade your version of QEMU", abi_version, 88 VHOST_SCSI_ABI_VERSION); 89 return -ENOSYS; 90 } 91 92 ret = vhost_scsi_common_start(vsc, &local_err); 93 if (ret < 0) { 94 error_reportf_err(local_err, "Error starting vhost-scsi: "); 95 return ret; 96 } 97 98 ret = vhost_scsi_set_endpoint(s); 99 if (ret < 0) { 100 error_report("Error setting vhost-scsi endpoint"); 101 vhost_scsi_common_stop(vsc); 102 } 103 104 return ret; 105 } 106 107 static void vhost_scsi_stop(VHostSCSI *s) 108 { 109 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 110 111 vhost_scsi_clear_endpoint(s); 112 vhost_scsi_common_stop(vsc); 113 } 114 115 static void vhost_scsi_set_status(VirtIODevice *vdev, uint8_t val) 116 { 117 VHostSCSI *s = VHOST_SCSI(vdev); 118 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 119 bool start = (val & VIRTIO_CONFIG_S_DRIVER_OK); 120 121 if (!vdev->vm_running) { 122 start = false; 123 } 124 125 if (vhost_dev_is_started(&vsc->dev) == start) { 126 return; 127 } 128 129 if (start) { 130 int ret; 131 132 ret = vhost_scsi_start(s); 133 if (ret < 0) { 134 error_report("unable to start vhost-scsi: %s", strerror(-ret)); 135 exit(1); 136 } 137 } else { 138 vhost_scsi_stop(s); 139 } 140 } 141 142 static void vhost_dummy_handle_output(VirtIODevice *vdev, VirtQueue *vq) 143 { 144 } 145 146 static int vhost_scsi_pre_save(void *opaque) 147 { 148 VHostSCSICommon *vsc = opaque; 149 150 /* At this point, backend must be stopped, otherwise 151 * it might keep writing to memory. */ 152 assert(!vhost_dev_is_started(&vsc->dev)); 153 154 return 0; 155 } 156 157 static const VMStateDescription vmstate_virtio_vhost_scsi = { 158 .name = "virtio-vhost_scsi", 159 .minimum_version_id = 1, 160 .version_id = 1, 161 .fields = (const VMStateField[]) { 162 VMSTATE_VIRTIO_DEVICE, 163 VMSTATE_END_OF_LIST() 164 }, 165 .pre_save = vhost_scsi_pre_save, 166 }; 167 168 static int vhost_scsi_set_workers(VHostSCSICommon *vsc, bool per_virtqueue) 169 { 170 struct vhost_dev *dev = &vsc->dev; 171 struct vhost_vring_worker vq_worker; 172 struct vhost_worker_state worker; 173 int i, ret; 174 175 /* Use default worker */ 176 if (!per_virtqueue || dev->nvqs == VHOST_SCSI_VQ_NUM_FIXED + 1) { 177 return 0; 178 } 179 180 /* 181 * ctl/evt share the first worker since it will be rare for them 182 * to send cmds while IO is running. 183 */ 184 for (i = VHOST_SCSI_VQ_NUM_FIXED + 1; i < dev->nvqs; i++) { 185 memset(&worker, 0, sizeof(worker)); 186 187 ret = dev->vhost_ops->vhost_new_worker(dev, &worker); 188 if (ret == -ENOTTY) { 189 /* 190 * worker ioctls are not implemented so just ignore and 191 * and continue device setup. 192 */ 193 warn_report("vhost-scsi: Backend supports a single worker. " 194 "Ignoring worker_per_virtqueue=true setting."); 195 ret = 0; 196 break; 197 } else if (ret) { 198 break; 199 } 200 201 memset(&vq_worker, 0, sizeof(vq_worker)); 202 vq_worker.worker_id = worker.worker_id; 203 vq_worker.index = i; 204 205 ret = dev->vhost_ops->vhost_attach_vring_worker(dev, &vq_worker); 206 if (ret == -ENOTTY) { 207 /* 208 * It's a bug for the kernel to have supported the worker creation 209 * ioctl but not attach. 210 */ 211 dev->vhost_ops->vhost_free_worker(dev, &worker); 212 break; 213 } else if (ret) { 214 break; 215 } 216 } 217 218 return ret; 219 } 220 221 static void vhost_scsi_realize(DeviceState *dev, Error **errp) 222 { 223 VirtIOSCSICommon *vs = VIRTIO_SCSI_COMMON(dev); 224 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev); 225 Error *err = NULL; 226 int vhostfd = -1; 227 int ret; 228 struct vhost_virtqueue *vqs = NULL; 229 230 if (!vs->conf.wwpn) { 231 error_setg(errp, "vhost-scsi: missing wwpn"); 232 return; 233 } 234 235 if (vs->conf.vhostfd) { 236 vhostfd = monitor_fd_param(monitor_cur(), vs->conf.vhostfd, errp); 237 if (vhostfd == -1) { 238 error_prepend(errp, "vhost-scsi: unable to parse vhostfd: "); 239 return; 240 } 241 } else { 242 vhostfd = open("/dev/vhost-scsi", O_RDWR); 243 if (vhostfd < 0) { 244 error_setg(errp, "vhost-scsi: open vhost char device failed: %s", 245 strerror(errno)); 246 return; 247 } 248 } 249 250 virtio_scsi_common_realize(dev, 251 vhost_dummy_handle_output, 252 vhost_dummy_handle_output, 253 vhost_dummy_handle_output, 254 &err); 255 if (err != NULL) { 256 error_propagate(errp, err); 257 goto close_fd; 258 } 259 260 if (!vsc->migratable) { 261 error_setg(&vsc->migration_blocker, 262 "vhost-scsi does not support migration in all cases. " 263 "When external environment supports it (Orchestrator migrates " 264 "target SCSI device state or use shared storage over network), " 265 "set 'migratable' property to true to enable migration."); 266 if (migrate_add_blocker_normal(&vsc->migration_blocker, errp) < 0) { 267 goto free_virtio; 268 } 269 } 270 271 vsc->dev.nvqs = VHOST_SCSI_VQ_NUM_FIXED + vs->conf.num_queues; 272 vqs = g_new0(struct vhost_virtqueue, vsc->dev.nvqs); 273 vsc->dev.vqs = vqs; 274 vsc->dev.vq_index = 0; 275 vsc->dev.backend_features = 0; 276 277 ret = vhost_dev_init(&vsc->dev, (void *)(uintptr_t)vhostfd, 278 VHOST_BACKEND_TYPE_KERNEL, 0, errp); 279 if (ret < 0) { 280 /* 281 * vhost_dev_init calls vhost_dev_cleanup on error, which closes 282 * vhostfd, don't double close it. 283 */ 284 vhostfd = -1; 285 goto free_vqs; 286 } 287 288 ret = vhost_scsi_set_workers(vsc, vs->conf.worker_per_virtqueue); 289 if (ret < 0) { 290 error_setg(errp, "vhost-scsi: vhost worker setup failed: %s", 291 strerror(-ret)); 292 goto free_vqs; 293 } 294 295 /* At present, channel and lun both are 0 for bootable vhost-scsi disk */ 296 vsc->channel = 0; 297 vsc->lun = 0; 298 /* Note: we can also get the minimum tpgt from kernel */ 299 vsc->target = vs->conf.boot_tpgt; 300 301 return; 302 303 free_vqs: 304 g_free(vqs); 305 if (!vsc->migratable) { 306 migrate_del_blocker(&vsc->migration_blocker); 307 } 308 free_virtio: 309 virtio_scsi_common_unrealize(dev); 310 close_fd: 311 if (vhostfd >= 0) { 312 close(vhostfd); 313 } 314 return; 315 } 316 317 static void vhost_scsi_unrealize(DeviceState *dev) 318 { 319 VirtIODevice *vdev = VIRTIO_DEVICE(dev); 320 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(dev); 321 struct vhost_virtqueue *vqs = vsc->dev.vqs; 322 323 if (!vsc->migratable) { 324 migrate_del_blocker(&vsc->migration_blocker); 325 } 326 327 /* This will stop vhost backend. */ 328 vhost_scsi_set_status(vdev, 0); 329 330 vhost_dev_cleanup(&vsc->dev); 331 g_free(vqs); 332 333 virtio_scsi_common_unrealize(dev); 334 } 335 336 static struct vhost_dev *vhost_scsi_get_vhost(VirtIODevice *vdev) 337 { 338 VHostSCSI *s = VHOST_SCSI(vdev); 339 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(s); 340 return &vsc->dev; 341 } 342 343 static Property vhost_scsi_properties[] = { 344 DEFINE_PROP_STRING("vhostfd", VirtIOSCSICommon, conf.vhostfd), 345 DEFINE_PROP_STRING("wwpn", VirtIOSCSICommon, conf.wwpn), 346 DEFINE_PROP_UINT32("boot_tpgt", VirtIOSCSICommon, conf.boot_tpgt, 0), 347 DEFINE_PROP_UINT32("num_queues", VirtIOSCSICommon, conf.num_queues, 348 VIRTIO_SCSI_AUTO_NUM_QUEUES), 349 DEFINE_PROP_UINT32("virtqueue_size", VirtIOSCSICommon, conf.virtqueue_size, 350 128), 351 DEFINE_PROP_BOOL("seg_max_adjust", VirtIOSCSICommon, conf.seg_max_adjust, 352 true), 353 DEFINE_PROP_UINT32("max_sectors", VirtIOSCSICommon, conf.max_sectors, 354 0xFFFF), 355 DEFINE_PROP_UINT32("cmd_per_lun", VirtIOSCSICommon, conf.cmd_per_lun, 128), 356 DEFINE_PROP_BIT64("t10_pi", VHostSCSICommon, host_features, 357 VIRTIO_SCSI_F_T10_PI, 358 false), 359 DEFINE_PROP_BOOL("migratable", VHostSCSICommon, migratable, false), 360 DEFINE_PROP_BOOL("worker_per_virtqueue", VirtIOSCSICommon, 361 conf.worker_per_virtqueue, false), 362 DEFINE_PROP_END_OF_LIST(), 363 }; 364 365 static void vhost_scsi_class_init(ObjectClass *klass, void *data) 366 { 367 DeviceClass *dc = DEVICE_CLASS(klass); 368 VirtioDeviceClass *vdc = VIRTIO_DEVICE_CLASS(klass); 369 FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(klass); 370 371 device_class_set_props(dc, vhost_scsi_properties); 372 dc->vmsd = &vmstate_virtio_vhost_scsi; 373 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 374 vdc->realize = vhost_scsi_realize; 375 vdc->unrealize = vhost_scsi_unrealize; 376 vdc->get_features = vhost_scsi_common_get_features; 377 vdc->set_config = vhost_scsi_common_set_config; 378 vdc->set_status = vhost_scsi_set_status; 379 vdc->get_vhost = vhost_scsi_get_vhost; 380 fwc->get_dev_path = vhost_scsi_common_get_fw_dev_path; 381 } 382 383 static void vhost_scsi_instance_init(Object *obj) 384 { 385 VHostSCSICommon *vsc = VHOST_SCSI_COMMON(obj); 386 387 vsc->feature_bits = kernel_feature_bits; 388 389 device_add_bootindex_property(obj, &vsc->bootindex, "bootindex", NULL, 390 DEVICE(vsc)); 391 } 392 393 static const TypeInfo vhost_scsi_info = { 394 .name = TYPE_VHOST_SCSI, 395 .parent = TYPE_VHOST_SCSI_COMMON, 396 .instance_size = sizeof(VHostSCSI), 397 .class_init = vhost_scsi_class_init, 398 .instance_init = vhost_scsi_instance_init, 399 .interfaces = (InterfaceInfo[]) { 400 { TYPE_FW_PATH_PROVIDER }, 401 { } 402 }, 403 }; 404 405 static void virtio_register_types(void) 406 { 407 type_register_static(&vhost_scsi_info); 408 } 409 410 type_init(virtio_register_types) 411