xref: /openbmc/qemu/hw/scsi/srp.h (revision 6016b7b4)
1 /*
2  * Copyright (c) 2005 Cisco Systems.  All rights reserved.
3  *
4  * This software is available to you under a choice of one of two
5  * licenses.  You may choose to be licensed under the terms of the GNU
6  * General Public License (GPL) Version 2, available from the file
7  * COPYING in the main directory of this source tree, or the
8  * OpenIB.org BSD license below:
9  *
10  *     Redistribution and use in source and binary forms, with or
11  *     without modification, are permitted provided that the following
12  *     conditions are met:
13  *
14  *      - Redistributions of source code must retain the above
15  *        copyright notice, this list of conditions and the following
16  *        disclaimer.
17  *
18  *      - Redistributions in binary form must reproduce the above
19  *        copyright notice, this list of conditions and the following
20  *        disclaimer in the documentation and/or other materials
21  *        provided with the distribution.
22  *
23  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
24  * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
25  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
26  * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
27  * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
28  * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
29  * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
30  * SOFTWARE.
31  *
32  */
33 
34 #ifndef SCSI_SRP_H
35 #define SCSI_SRP_H
36 
37 /*
38  * Structures and constants for the SCSI RDMA Protocol (SRP) as
39  * defined by the INCITS T10 committee.  This file was written using
40  * draft Revision 16a of the SRP standard.
41  */
42 
43 enum {
44 
45     SRP_LOGIN_REQ = 0x00,
46     SRP_TSK_MGMT  = 0x01,
47     SRP_CMD       = 0x02,
48     SRP_I_LOGOUT  = 0x03,
49     SRP_LOGIN_RSP = 0xc0,
50     SRP_RSP       = 0xc1,
51     SRP_LOGIN_REJ = 0xc2,
52     SRP_T_LOGOUT  = 0x80,
53     SRP_CRED_REQ  = 0x81,
54     SRP_AER_REQ   = 0x82,
55     SRP_CRED_RSP  = 0x41,
56     SRP_AER_RSP   = 0x42
57 };
58 
59 enum {
60     SRP_BUF_FORMAT_DIRECT   = 1 << 1,
61     SRP_BUF_FORMAT_INDIRECT = 1 << 2
62 };
63 
64 enum {
65     SRP_NO_DATA_DESC       = 0,
66     SRP_DATA_DESC_DIRECT   = 1,
67     SRP_DATA_DESC_INDIRECT = 2
68 };
69 
70 enum {
71     SRP_TSK_ABORT_TASK     = 0x01,
72     SRP_TSK_ABORT_TASK_SET = 0x02,
73     SRP_TSK_CLEAR_TASK_SET = 0x04,
74     SRP_TSK_LUN_RESET      = 0x08,
75     SRP_TSK_CLEAR_ACA      = 0x40
76 };
77 
78 enum srp_login_rej_reason {
79     SRP_LOGIN_REJ_UNABLE_ESTABLISH_CHANNEL   = 0x00010000,
80     SRP_LOGIN_REJ_INSUFFICIENT_RESOURCES     = 0x00010001,
81     SRP_LOGIN_REJ_REQ_IT_IU_LENGTH_TOO_LARGE = 0x00010002,
82     SRP_LOGIN_REJ_UNABLE_ASSOCIATE_CHANNEL   = 0x00010003,
83     SRP_LOGIN_REJ_UNSUPPORTED_DESCRIPTOR_FMT = 0x00010004,
84     SRP_LOGIN_REJ_MULTI_CHANNEL_UNSUPPORTED  = 0x00010005,
85     SRP_LOGIN_REJ_CHANNEL_LIMIT_REACHED      = 0x00010006
86 };
87 
88 enum {
89     SRP_REV10_IB_IO_CLASS  = 0xff00,
90     SRP_REV16A_IB_IO_CLASS = 0x0100
91 };
92 
93 enum {
94     SRP_TSK_MGMT_COMPLETE       = 0x00,
95     SRP_TSK_MGMT_FIELDS_INVALID = 0x02,
96     SRP_TSK_MGMT_NOT_SUPPORTED  = 0x04,
97     SRP_TSK_MGMT_FAILED         = 0x05
98 };
99 
100 struct srp_direct_buf {
101     uint64_t    va;
102     uint32_t    key;
103     uint32_t    len;
104 };
105 
106 /*
107  * We need the packed attribute because the SRP spec puts the list of
108  * descriptors at an offset of 20, which is not aligned to the size of
109  * struct srp_direct_buf.  The whole structure must be packed to avoid
110  * having the 20-byte structure padded to 24 bytes on 64-bit architectures.
111  */
112 struct srp_indirect_buf {
113     struct srp_direct_buf    table_desc;
114     uint32_t                 len;
115     struct srp_direct_buf    desc_list[0];
116 } QEMU_PACKED;
117 
118 enum {
119     SRP_MULTICHAN_SINGLE = 0,
120     SRP_MULTICHAN_MULTI  = 1
121 };
122 
123 struct srp_login_req {
124     uint8_t    opcode;
125     uint8_t    reserved1[7];
126     uint64_t   tag;
127     uint32_t   req_it_iu_len;
128     uint8_t    reserved2[4];
129     uint16_t   req_buf_fmt;
130     uint8_t    req_flags;
131     uint8_t    reserved3[5];
132     uint8_t    initiator_port_id[16];
133     uint8_t    target_port_id[16];
134 };
135 
136 /*
137  * The SRP spec defines the size of the LOGIN_RSP structure to be 52
138  * bytes, so it needs to be packed to avoid having it padded to 56
139  * bytes on 64-bit architectures.
140  */
141 struct srp_login_rsp {
142     uint8_t    opcode;
143     uint8_t    reserved1[3];
144     uint32_t   req_lim_delta;
145     uint64_t   tag;
146     uint32_t   max_it_iu_len;
147     uint32_t   max_ti_iu_len;
148     uint16_t   buf_fmt;
149     uint8_t    rsp_flags;
150     uint8_t    reserved2[25];
151 } QEMU_PACKED;
152 
153 struct srp_login_rej {
154     uint8_t    opcode;
155     uint8_t    reserved1[3];
156     uint32_t   reason;
157     uint64_t   tag;
158     uint8_t    reserved2[8];
159     uint16_t   buf_fmt;
160     uint8_t    reserved3[6];
161 };
162 
163 struct srp_i_logout {
164     uint8_t    opcode;
165     uint8_t    reserved[7];
166     uint64_t   tag;
167 };
168 
169 struct srp_t_logout {
170     uint8_t    opcode;
171     uint8_t    sol_not;
172     uint8_t    reserved[2];
173     uint32_t   reason;
174     uint64_t   tag;
175 };
176 
177 /*
178  * We need the packed attribute because the SRP spec only aligns the
179  * 8-byte LUN field to 4 bytes.
180  */
181 struct srp_tsk_mgmt {
182     uint8_t    opcode;
183     uint8_t    sol_not;
184     uint8_t    reserved1[6];
185     uint64_t   tag;
186     uint8_t    reserved2[4];
187     uint64_t   lun;
188     uint8_t    reserved3[2];
189     uint8_t    tsk_mgmt_func;
190     uint8_t    reserved4;
191     uint64_t   task_tag;
192     uint8_t    reserved5[8];
193 } QEMU_PACKED;
194 
195 /*
196  * We need the packed attribute because the SRP spec only aligns the
197  * 8-byte LUN field to 4 bytes.
198  */
199 struct srp_cmd {
200     uint8_t    opcode;
201     uint8_t    sol_not;
202     uint8_t    reserved1[3];
203     uint8_t    buf_fmt;
204     uint8_t    data_out_desc_cnt;
205     uint8_t    data_in_desc_cnt;
206     uint64_t   tag;
207     uint8_t    reserved2[4];
208     uint64_t   lun;
209     uint8_t    reserved3;
210     uint8_t    task_attr;
211     uint8_t    reserved4;
212     uint8_t    add_cdb_len;
213     uint8_t    cdb[16];
214     uint8_t    add_data[0];
215 } QEMU_PACKED;
216 
217 enum {
218     SRP_RSP_FLAG_RSPVALID = 1 << 0,
219     SRP_RSP_FLAG_SNSVALID = 1 << 1,
220     SRP_RSP_FLAG_DOOVER   = 1 << 2,
221     SRP_RSP_FLAG_DOUNDER  = 1 << 3,
222     SRP_RSP_FLAG_DIOVER   = 1 << 4,
223     SRP_RSP_FLAG_DIUNDER  = 1 << 5
224 };
225 
226 /*
227  * The SRP spec defines the size of the RSP structure to be 36 bytes,
228  * so it needs to be packed to avoid having it padded to 40 bytes on
229  * 64-bit architectures.
230  */
231 struct srp_rsp {
232     uint8_t    opcode;
233     uint8_t    sol_not;
234     uint8_t    reserved1[2];
235     uint32_t   req_lim_delta;
236     uint64_t   tag;
237     uint8_t    reserved2[2];
238     uint8_t    flags;
239     uint8_t    status;
240     uint32_t   data_out_res_cnt;
241     uint32_t   data_in_res_cnt;
242     uint32_t   sense_data_len;
243     uint32_t   resp_data_len;
244     uint8_t    data[0];
245 } QEMU_PACKED;
246 
247 #endif /* SCSI_SRP_H */
248