xref: /openbmc/qemu/hw/scsi/scsi-generic.c (revision 52f91c37)
1 /*
2  * Generic SCSI Device support
3  *
4  * Copyright (c) 2007 Bull S.A.S.
5  * Based on code by Paul Brook
6  * Based on code by Fabrice Bellard
7  *
8  * Written by Laurent Vivier <Laurent.Vivier@bull.net>
9  *
10  * This code is licensed under the LGPL.
11  *
12  */
13 
14 #include "qemu-common.h"
15 #include "qemu/error-report.h"
16 #include "hw/scsi/scsi.h"
17 #include "sysemu/blockdev.h"
18 
19 #ifdef __linux__
20 
21 //#define DEBUG_SCSI
22 
23 #ifdef DEBUG_SCSI
24 #define DPRINTF(fmt, ...) \
25 do { printf("scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
26 #else
27 #define DPRINTF(fmt, ...) do {} while(0)
28 #endif
29 
30 #define BADF(fmt, ...) \
31 do { fprintf(stderr, "scsi-generic: " fmt , ## __VA_ARGS__); } while (0)
32 
33 #include <stdio.h>
34 #include <sys/types.h>
35 #include <sys/stat.h>
36 #include <unistd.h>
37 #include <scsi/sg.h>
38 #include "block/scsi.h"
39 
40 #define SG_ERR_DRIVER_TIMEOUT  0x06
41 #define SG_ERR_DRIVER_SENSE    0x08
42 
43 #define SG_ERR_DID_OK          0x00
44 #define SG_ERR_DID_NO_CONNECT  0x01
45 #define SG_ERR_DID_BUS_BUSY    0x02
46 #define SG_ERR_DID_TIME_OUT    0x03
47 
48 #ifndef MAX_UINT
49 #define MAX_UINT ((unsigned int)-1)
50 #endif
51 
52 typedef struct SCSIGenericReq {
53     SCSIRequest req;
54     uint8_t *buf;
55     int buflen;
56     int len;
57     sg_io_hdr_t io_header;
58 } SCSIGenericReq;
59 
60 static void scsi_generic_save_request(QEMUFile *f, SCSIRequest *req)
61 {
62     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
63 
64     qemu_put_sbe32s(f, &r->buflen);
65     if (r->buflen && r->req.cmd.mode == SCSI_XFER_TO_DEV) {
66         assert(!r->req.sg);
67         qemu_put_buffer(f, r->buf, r->req.cmd.xfer);
68     }
69 }
70 
71 static void scsi_generic_load_request(QEMUFile *f, SCSIRequest *req)
72 {
73     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
74 
75     qemu_get_sbe32s(f, &r->buflen);
76     if (r->buflen && r->req.cmd.mode == SCSI_XFER_TO_DEV) {
77         assert(!r->req.sg);
78         qemu_get_buffer(f, r->buf, r->req.cmd.xfer);
79     }
80 }
81 
82 static void scsi_free_request(SCSIRequest *req)
83 {
84     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
85 
86     g_free(r->buf);
87 }
88 
89 /* Helper function for command completion.  */
90 static void scsi_command_complete(void *opaque, int ret)
91 {
92     int status;
93     SCSIGenericReq *r = (SCSIGenericReq *)opaque;
94 
95     r->req.aiocb = NULL;
96     if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
97         r->req.sense_len = r->io_header.sb_len_wr;
98     }
99 
100     if (ret != 0) {
101         switch (ret) {
102         case -EDOM:
103             status = TASK_SET_FULL;
104             break;
105         case -ENOMEM:
106             status = CHECK_CONDITION;
107             scsi_req_build_sense(&r->req, SENSE_CODE(TARGET_FAILURE));
108             break;
109         default:
110             status = CHECK_CONDITION;
111             scsi_req_build_sense(&r->req, SENSE_CODE(IO_ERROR));
112             break;
113         }
114     } else {
115         if (r->io_header.host_status == SG_ERR_DID_NO_CONNECT ||
116             r->io_header.host_status == SG_ERR_DID_BUS_BUSY ||
117             r->io_header.host_status == SG_ERR_DID_TIME_OUT ||
118             (r->io_header.driver_status & SG_ERR_DRIVER_TIMEOUT)) {
119             status = BUSY;
120             BADF("Driver Timeout\n");
121         } else if (r->io_header.host_status) {
122             status = CHECK_CONDITION;
123             scsi_req_build_sense(&r->req, SENSE_CODE(I_T_NEXUS_LOSS));
124         } else if (r->io_header.status) {
125             status = r->io_header.status;
126         } else if (r->io_header.driver_status & SG_ERR_DRIVER_SENSE) {
127             status = CHECK_CONDITION;
128         } else {
129             status = GOOD;
130         }
131     }
132     DPRINTF("Command complete 0x%p tag=0x%x status=%d\n",
133             r, r->req.tag, status);
134 
135     scsi_req_complete(&r->req, status);
136     if (!r->req.io_canceled) {
137         scsi_req_unref(&r->req);
138     }
139 }
140 
141 /* Cancel a pending data transfer.  */
142 static void scsi_cancel_io(SCSIRequest *req)
143 {
144     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
145 
146     DPRINTF("Cancel tag=0x%x\n", req->tag);
147     if (r->req.aiocb) {
148         bdrv_aio_cancel(r->req.aiocb);
149 
150         /* This reference was left in by scsi_*_data.  We take ownership of
151          * it independent of whether bdrv_aio_cancel completes the request
152          * or not.  */
153         scsi_req_unref(&r->req);
154     }
155     r->req.aiocb = NULL;
156 }
157 
158 static int execute_command(BlockDriverState *bdrv,
159                            SCSIGenericReq *r, int direction,
160 			   BlockDriverCompletionFunc *complete)
161 {
162     r->io_header.interface_id = 'S';
163     r->io_header.dxfer_direction = direction;
164     r->io_header.dxferp = r->buf;
165     r->io_header.dxfer_len = r->buflen;
166     r->io_header.cmdp = r->req.cmd.buf;
167     r->io_header.cmd_len = r->req.cmd.len;
168     r->io_header.mx_sb_len = sizeof(r->req.sense);
169     r->io_header.sbp = r->req.sense;
170     r->io_header.timeout = MAX_UINT;
171     r->io_header.usr_ptr = r;
172     r->io_header.flags |= SG_FLAG_DIRECT_IO;
173 
174     r->req.aiocb = bdrv_aio_ioctl(bdrv, SG_IO, &r->io_header, complete, r);
175     if (r->req.aiocb == NULL) {
176         return -EIO;
177     }
178 
179     return 0;
180 }
181 
182 static void scsi_read_complete(void * opaque, int ret)
183 {
184     SCSIGenericReq *r = (SCSIGenericReq *)opaque;
185     SCSIDevice *s = r->req.dev;
186     int len;
187 
188     r->req.aiocb = NULL;
189     if (ret) {
190         DPRINTF("IO error ret %d\n", ret);
191         scsi_command_complete(r, ret);
192         return;
193     }
194     len = r->io_header.dxfer_len - r->io_header.resid;
195     DPRINTF("Data ready tag=0x%x len=%d\n", r->req.tag, len);
196 
197     r->len = -1;
198     if (len == 0) {
199         scsi_command_complete(r, 0);
200     } else {
201         /* Snoop READ CAPACITY output to set the blocksize.  */
202         if (r->req.cmd.buf[0] == READ_CAPACITY_10 &&
203             (ldl_be_p(&r->buf[0]) != 0xffffffffU || s->max_lba == 0)) {
204             s->blocksize = ldl_be_p(&r->buf[4]);
205             s->max_lba = ldl_be_p(&r->buf[0]) & 0xffffffffULL;
206         } else if (r->req.cmd.buf[0] == SERVICE_ACTION_IN_16 &&
207                    (r->req.cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) {
208             s->blocksize = ldl_be_p(&r->buf[8]);
209             s->max_lba = ldq_be_p(&r->buf[0]);
210         }
211         bdrv_set_guest_block_size(s->conf.bs, s->blocksize);
212 
213         scsi_req_data(&r->req, len);
214         if (!r->req.io_canceled) {
215             scsi_req_unref(&r->req);
216         }
217     }
218 }
219 
220 /* Read more data from scsi device into buffer.  */
221 static void scsi_read_data(SCSIRequest *req)
222 {
223     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
224     SCSIDevice *s = r->req.dev;
225     int ret;
226 
227     DPRINTF("scsi_read_data 0x%x\n", req->tag);
228 
229     /* The request is used as the AIO opaque value, so add a ref.  */
230     scsi_req_ref(&r->req);
231     if (r->len == -1) {
232         scsi_command_complete(r, 0);
233         return;
234     }
235 
236     ret = execute_command(s->conf.bs, r, SG_DXFER_FROM_DEV, scsi_read_complete);
237     if (ret < 0) {
238         scsi_command_complete(r, ret);
239     }
240 }
241 
242 static void scsi_write_complete(void * opaque, int ret)
243 {
244     SCSIGenericReq *r = (SCSIGenericReq *)opaque;
245     SCSIDevice *s = r->req.dev;
246 
247     DPRINTF("scsi_write_complete() ret = %d\n", ret);
248     r->req.aiocb = NULL;
249     if (ret) {
250         DPRINTF("IO error\n");
251         scsi_command_complete(r, ret);
252         return;
253     }
254 
255     if (r->req.cmd.buf[0] == MODE_SELECT && r->req.cmd.buf[4] == 12 &&
256         s->type == TYPE_TAPE) {
257         s->blocksize = (r->buf[9] << 16) | (r->buf[10] << 8) | r->buf[11];
258         DPRINTF("block size %d\n", s->blocksize);
259     }
260 
261     scsi_command_complete(r, ret);
262 }
263 
264 /* Write data to a scsi device.  Returns nonzero on failure.
265    The transfer may complete asynchronously.  */
266 static void scsi_write_data(SCSIRequest *req)
267 {
268     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
269     SCSIDevice *s = r->req.dev;
270     int ret;
271 
272     DPRINTF("scsi_write_data 0x%x\n", req->tag);
273     if (r->len == 0) {
274         r->len = r->buflen;
275         scsi_req_data(&r->req, r->len);
276         return;
277     }
278 
279     /* The request is used as the AIO opaque value, so add a ref.  */
280     scsi_req_ref(&r->req);
281     ret = execute_command(s->conf.bs, r, SG_DXFER_TO_DEV, scsi_write_complete);
282     if (ret < 0) {
283         scsi_command_complete(r, ret);
284     }
285 }
286 
287 /* Return a pointer to the data buffer.  */
288 static uint8_t *scsi_get_buf(SCSIRequest *req)
289 {
290     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
291 
292     return r->buf;
293 }
294 
295 /* Execute a scsi command.  Returns the length of the data expected by the
296    command.  This will be Positive for data transfers from the device
297    (eg. disk reads), negative for transfers to the device (eg. disk writes),
298    and zero if the command does not transfer any data.  */
299 
300 static int32_t scsi_send_command(SCSIRequest *req, uint8_t *cmd)
301 {
302     SCSIGenericReq *r = DO_UPCAST(SCSIGenericReq, req, req);
303     SCSIDevice *s = r->req.dev;
304     int ret;
305 
306     DPRINTF("Command: lun=%d tag=0x%x len %zd data=0x%02x", lun, tag,
307             r->req.cmd.xfer, cmd[0]);
308 
309 #ifdef DEBUG_SCSI
310     {
311         int i;
312         for (i = 1; i < r->req.cmd.len; i++) {
313             printf(" 0x%02x", cmd[i]);
314         }
315         printf("\n");
316     }
317 #endif
318 
319     if (r->req.cmd.xfer == 0) {
320         if (r->buf != NULL)
321             g_free(r->buf);
322         r->buflen = 0;
323         r->buf = NULL;
324         /* The request is used as the AIO opaque value, so add a ref.  */
325         scsi_req_ref(&r->req);
326         ret = execute_command(s->conf.bs, r, SG_DXFER_NONE, scsi_command_complete);
327         if (ret < 0) {
328             scsi_command_complete(r, ret);
329             return 0;
330         }
331         return 0;
332     }
333 
334     if (r->buflen != r->req.cmd.xfer) {
335         if (r->buf != NULL)
336             g_free(r->buf);
337         r->buf = g_malloc(r->req.cmd.xfer);
338         r->buflen = r->req.cmd.xfer;
339     }
340 
341     memset(r->buf, 0, r->buflen);
342     r->len = r->req.cmd.xfer;
343     if (r->req.cmd.mode == SCSI_XFER_TO_DEV) {
344         r->len = 0;
345         return -r->req.cmd.xfer;
346     } else {
347         return r->req.cmd.xfer;
348     }
349 }
350 
351 static int get_stream_blocksize(BlockDriverState *bdrv)
352 {
353     uint8_t cmd[6];
354     uint8_t buf[12];
355     uint8_t sensebuf[8];
356     sg_io_hdr_t io_header;
357     int ret;
358 
359     memset(cmd, 0, sizeof(cmd));
360     memset(buf, 0, sizeof(buf));
361     cmd[0] = MODE_SENSE;
362     cmd[4] = sizeof(buf);
363 
364     memset(&io_header, 0, sizeof(io_header));
365     io_header.interface_id = 'S';
366     io_header.dxfer_direction = SG_DXFER_FROM_DEV;
367     io_header.dxfer_len = sizeof(buf);
368     io_header.dxferp = buf;
369     io_header.cmdp = cmd;
370     io_header.cmd_len = sizeof(cmd);
371     io_header.mx_sb_len = sizeof(sensebuf);
372     io_header.sbp = sensebuf;
373     io_header.timeout = 6000; /* XXX */
374 
375     ret = bdrv_ioctl(bdrv, SG_IO, &io_header);
376     if (ret < 0 || io_header.driver_status || io_header.host_status) {
377         return -1;
378     }
379     return (buf[9] << 16) | (buf[10] << 8) | buf[11];
380 }
381 
382 static void scsi_generic_reset(DeviceState *dev)
383 {
384     SCSIDevice *s = SCSI_DEVICE(dev);
385 
386     scsi_device_purge_requests(s, SENSE_CODE(RESET));
387 }
388 
389 static void scsi_destroy(SCSIDevice *s)
390 {
391     scsi_device_purge_requests(s, SENSE_CODE(NO_SENSE));
392     blockdev_mark_auto_del(s->conf.bs);
393 }
394 
395 static int scsi_generic_initfn(SCSIDevice *s)
396 {
397     int sg_version;
398     struct sg_scsi_id scsiid;
399 
400     if (!s->conf.bs) {
401         error_report("drive property not set");
402         return -1;
403     }
404 
405     if (bdrv_get_on_error(s->conf.bs, 0) != BLOCKDEV_ON_ERROR_ENOSPC) {
406         error_report("Device doesn't support drive option werror");
407         return -1;
408     }
409     if (bdrv_get_on_error(s->conf.bs, 1) != BLOCKDEV_ON_ERROR_REPORT) {
410         error_report("Device doesn't support drive option rerror");
411         return -1;
412     }
413 
414     /* check we are using a driver managing SG_IO (version 3 and after */
415     if (bdrv_ioctl(s->conf.bs, SG_GET_VERSION_NUM, &sg_version) < 0) {
416         error_report("scsi generic interface not supported");
417         return -1;
418     }
419     if (sg_version < 30000) {
420         error_report("scsi generic interface too old");
421         return -1;
422     }
423 
424     /* get LUN of the /dev/sg? */
425     if (bdrv_ioctl(s->conf.bs, SG_GET_SCSI_ID, &scsiid)) {
426         error_report("SG_GET_SCSI_ID ioctl failed");
427         return -1;
428     }
429 
430     /* define device state */
431     s->type = scsiid.scsi_type;
432     DPRINTF("device type %d\n", s->type);
433     if (s->type == TYPE_DISK || s->type == TYPE_ROM) {
434         add_boot_device_path(s->conf.bootindex, &s->qdev, NULL);
435     }
436 
437     switch (s->type) {
438     case TYPE_TAPE:
439         s->blocksize = get_stream_blocksize(s->conf.bs);
440         if (s->blocksize == -1) {
441             s->blocksize = 0;
442         }
443         break;
444 
445         /* Make a guess for block devices, we'll fix it when the guest sends.
446          * READ CAPACITY.  If they don't, they likely would assume these sizes
447          * anyway. (TODO: they could also send MODE SENSE).
448          */
449     case TYPE_ROM:
450     case TYPE_WORM:
451         s->blocksize = 2048;
452         break;
453     default:
454         s->blocksize = 512;
455         break;
456     }
457 
458     DPRINTF("block size %d\n", s->blocksize);
459     return 0;
460 }
461 
462 const SCSIReqOps scsi_generic_req_ops = {
463     .size         = sizeof(SCSIGenericReq),
464     .free_req     = scsi_free_request,
465     .send_command = scsi_send_command,
466     .read_data    = scsi_read_data,
467     .write_data   = scsi_write_data,
468     .cancel_io    = scsi_cancel_io,
469     .get_buf      = scsi_get_buf,
470     .load_request = scsi_generic_load_request,
471     .save_request = scsi_generic_save_request,
472 };
473 
474 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun,
475                                      uint8_t *buf, void *hba_private)
476 {
477     SCSIRequest *req;
478 
479     req = scsi_req_alloc(&scsi_generic_req_ops, d, tag, lun, hba_private);
480     return req;
481 }
482 
483 static Property scsi_generic_properties[] = {
484     DEFINE_PROP_DRIVE("drive", SCSIDevice, conf.bs),
485     DEFINE_PROP_INT32("bootindex", SCSIDevice, conf.bootindex, -1),
486     DEFINE_PROP_END_OF_LIST(),
487 };
488 
489 static void scsi_generic_class_initfn(ObjectClass *klass, void *data)
490 {
491     DeviceClass *dc = DEVICE_CLASS(klass);
492     SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass);
493 
494     sc->init         = scsi_generic_initfn;
495     sc->destroy      = scsi_destroy;
496     sc->alloc_req    = scsi_new_request;
497     dc->fw_name = "disk";
498     dc->desc = "pass through generic scsi device (/dev/sg*)";
499     dc->reset = scsi_generic_reset;
500     dc->props = scsi_generic_properties;
501     dc->vmsd  = &vmstate_scsi_device;
502 }
503 
504 static const TypeInfo scsi_generic_info = {
505     .name          = "scsi-generic",
506     .parent        = TYPE_SCSI_DEVICE,
507     .instance_size = sizeof(SCSIDevice),
508     .class_init    = scsi_generic_class_initfn,
509 };
510 
511 static void scsi_generic_register_types(void)
512 {
513     type_register_static(&scsi_generic_info);
514 }
515 
516 type_init(scsi_generic_register_types)
517 
518 #endif /* __linux__ */
519