1 /* 2 * SCSI Device emulation 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Based on code by Fabrice Bellard 6 * 7 * Written by Paul Brook 8 * Modifications: 9 * 2009-Dec-12 Artyom Tarasenko : implemented stamdard inquiry for the case 10 * when the allocation length of CDB is smaller 11 * than 36. 12 * 2009-Oct-13 Artyom Tarasenko : implemented the block descriptor in the 13 * MODE SENSE response. 14 * 15 * This code is licensed under the LGPL. 16 * 17 * Note that this file only handles the SCSI architecture model and device 18 * commands. Emulation of interface/link layer protocols is handled by 19 * the host adapter emulator. 20 */ 21 22 #include "qemu/osdep.h" 23 #include "qemu/units.h" 24 #include "qapi/error.h" 25 #include "qemu/error-report.h" 26 #include "qemu/main-loop.h" 27 #include "qemu/module.h" 28 #include "qemu/hw-version.h" 29 #include "qemu/memalign.h" 30 #include "hw/scsi/scsi.h" 31 #include "migration/qemu-file-types.h" 32 #include "migration/vmstate.h" 33 #include "hw/scsi/emulation.h" 34 #include "scsi/constants.h" 35 #include "sysemu/arch_init.h" 36 #include "sysemu/block-backend.h" 37 #include "sysemu/blockdev.h" 38 #include "hw/block/block.h" 39 #include "hw/qdev-properties.h" 40 #include "hw/qdev-properties-system.h" 41 #include "sysemu/dma.h" 42 #include "sysemu/sysemu.h" 43 #include "qemu/cutils.h" 44 #include "trace.h" 45 #include "qom/object.h" 46 47 #ifdef __linux 48 #include <scsi/sg.h> 49 #endif 50 51 #define SCSI_WRITE_SAME_MAX (512 * KiB) 52 #define SCSI_DMA_BUF_SIZE (128 * KiB) 53 #define SCSI_MAX_INQUIRY_LEN 256 54 #define SCSI_MAX_MODE_LEN 256 55 56 #define DEFAULT_DISCARD_GRANULARITY (4 * KiB) 57 #define DEFAULT_MAX_UNMAP_SIZE (1 * GiB) 58 #define DEFAULT_MAX_IO_SIZE INT_MAX /* 2 GB - 1 block */ 59 60 #define TYPE_SCSI_DISK_BASE "scsi-disk-base" 61 62 #define MAX_SERIAL_LEN 36 63 #define MAX_SERIAL_LEN_FOR_DEVID 20 64 65 OBJECT_DECLARE_TYPE(SCSIDiskState, SCSIDiskClass, SCSI_DISK_BASE) 66 67 struct SCSIDiskClass { 68 SCSIDeviceClass parent_class; 69 /* 70 * Callbacks receive ret == 0 for success. Errors are represented either as 71 * negative errno values, or as positive SAM status codes. 72 * 73 * Beware: For errors returned in host_status, the function may directly 74 * complete the request and never call the callback. 75 */ 76 DMAIOFunc *dma_readv; 77 DMAIOFunc *dma_writev; 78 bool (*need_fua_emulation)(SCSICommand *cmd); 79 void (*update_sense)(SCSIRequest *r); 80 }; 81 82 typedef struct SCSIDiskReq { 83 SCSIRequest req; 84 /* Both sector and sector_count are in terms of BDRV_SECTOR_SIZE bytes. */ 85 uint64_t sector; 86 uint32_t sector_count; 87 uint32_t buflen; 88 bool started; 89 bool need_fua_emulation; 90 struct iovec iov; 91 QEMUIOVector qiov; 92 BlockAcctCookie acct; 93 } SCSIDiskReq; 94 95 #define SCSI_DISK_F_REMOVABLE 0 96 #define SCSI_DISK_F_DPOFUA 1 97 #define SCSI_DISK_F_NO_REMOVABLE_DEVOPS 2 98 99 struct SCSIDiskState { 100 SCSIDevice qdev; 101 uint32_t features; 102 bool media_changed; 103 bool media_event; 104 bool eject_request; 105 uint16_t port_index; 106 uint64_t max_unmap_size; 107 uint64_t max_io_size; 108 uint32_t quirks; 109 QEMUBH *bh; 110 char *version; 111 char *serial; 112 char *vendor; 113 char *product; 114 char *device_id; 115 char *loadparm; /* only for s390x */ 116 bool tray_open; 117 bool tray_locked; 118 /* 119 * 0x0000 - rotation rate not reported 120 * 0x0001 - non-rotating medium (SSD) 121 * 0x0002-0x0400 - reserved 122 * 0x0401-0xffe - rotations per minute 123 * 0xffff - reserved 124 */ 125 uint16_t rotation_rate; 126 bool migrate_emulated_scsi_request; 127 }; 128 129 static void scsi_free_request(SCSIRequest *req) 130 { 131 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 132 133 qemu_vfree(r->iov.iov_base); 134 } 135 136 /* Helper function for command completion with sense. */ 137 static void scsi_check_condition(SCSIDiskReq *r, SCSISense sense) 138 { 139 trace_scsi_disk_check_condition(r->req.tag, sense.key, sense.asc, 140 sense.ascq); 141 scsi_req_build_sense(&r->req, sense); 142 scsi_req_complete(&r->req, CHECK_CONDITION); 143 } 144 145 static void scsi_init_iovec(SCSIDiskReq *r, size_t size) 146 { 147 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 148 149 if (!r->iov.iov_base) { 150 r->buflen = size; 151 r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen); 152 } 153 r->iov.iov_len = MIN(r->sector_count * BDRV_SECTOR_SIZE, r->buflen); 154 qemu_iovec_init_external(&r->qiov, &r->iov, 1); 155 } 156 157 static void scsi_disk_save_request(QEMUFile *f, SCSIRequest *req) 158 { 159 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 160 161 qemu_put_be64s(f, &r->sector); 162 qemu_put_be32s(f, &r->sector_count); 163 qemu_put_be32s(f, &r->buflen); 164 if (r->buflen) { 165 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 166 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len); 167 } else if (!req->retry) { 168 uint32_t len = r->iov.iov_len; 169 qemu_put_be32s(f, &len); 170 qemu_put_buffer(f, r->iov.iov_base, r->iov.iov_len); 171 } 172 } 173 } 174 175 static void scsi_disk_emulate_save_request(QEMUFile *f, SCSIRequest *req) 176 { 177 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 178 179 if (s->migrate_emulated_scsi_request) { 180 scsi_disk_save_request(f, req); 181 } 182 } 183 184 static void scsi_disk_load_request(QEMUFile *f, SCSIRequest *req) 185 { 186 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 187 188 qemu_get_be64s(f, &r->sector); 189 qemu_get_be32s(f, &r->sector_count); 190 qemu_get_be32s(f, &r->buflen); 191 if (r->buflen) { 192 scsi_init_iovec(r, r->buflen); 193 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 194 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len); 195 } else if (!r->req.retry) { 196 uint32_t len; 197 qemu_get_be32s(f, &len); 198 r->iov.iov_len = len; 199 assert(r->iov.iov_len <= r->buflen); 200 qemu_get_buffer(f, r->iov.iov_base, r->iov.iov_len); 201 } 202 } 203 204 qemu_iovec_init_external(&r->qiov, &r->iov, 1); 205 } 206 207 static void scsi_disk_emulate_load_request(QEMUFile *f, SCSIRequest *req) 208 { 209 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 210 211 if (s->migrate_emulated_scsi_request) { 212 scsi_disk_load_request(f, req); 213 } 214 } 215 216 /* 217 * scsi_handle_rw_error has two return values. False means that the error 218 * must be ignored, true means that the error has been processed and the 219 * caller should not do anything else for this request. Note that 220 * scsi_handle_rw_error always manages its reference counts, independent 221 * of the return value. 222 */ 223 static bool scsi_handle_rw_error(SCSIDiskReq *r, int ret, bool acct_failed) 224 { 225 bool is_read = (r->req.cmd.mode == SCSI_XFER_FROM_DEV); 226 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 227 SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); 228 SCSISense sense = SENSE_CODE(NO_SENSE); 229 int error; 230 bool req_has_sense = false; 231 BlockErrorAction action; 232 int status; 233 234 if (ret < 0) { 235 status = scsi_sense_from_errno(-ret, &sense); 236 error = -ret; 237 } else { 238 /* A passthrough command has completed with nonzero status. */ 239 status = ret; 240 switch (status) { 241 case CHECK_CONDITION: 242 req_has_sense = true; 243 error = scsi_sense_buf_to_errno(r->req.sense, sizeof(r->req.sense)); 244 break; 245 case RESERVATION_CONFLICT: 246 /* 247 * Don't apply the error policy, always report to the guest. 248 * 249 * This is a passthrough code path, so it's not a backend error, but 250 * a response to an invalid guest request. 251 * 252 * Windows Failover Cluster validation intentionally sends invalid 253 * requests to verify that reservations work as intended. It is 254 * crucial that it sees the resulting errors. 255 * 256 * Treating a reservation conflict as a guest-side error is obvious 257 * when a pr-manager is in use. Without one, the situation is less 258 * clear, but there might be nothing that can be fixed on the host 259 * (like in the above example), and we don't want to be stuck in a 260 * loop where resuming the VM and retrying the request immediately 261 * stops it again. So always reporting is still the safer option in 262 * this case, too. 263 */ 264 error = 0; 265 break; 266 default: 267 error = EINVAL; 268 break; 269 } 270 } 271 272 /* 273 * Check whether the error has to be handled by the guest or should 274 * rather follow the rerror=/werror= settings. Guest-handled errors 275 * are usually retried immediately, so do not post them to QMP and 276 * do not account them as failed I/O. 277 */ 278 if (!error || (req_has_sense && 279 scsi_sense_buf_is_guest_recoverable(r->req.sense, 280 sizeof(r->req.sense)))) { 281 action = BLOCK_ERROR_ACTION_REPORT; 282 acct_failed = false; 283 } else { 284 action = blk_get_error_action(s->qdev.conf.blk, is_read, error); 285 blk_error_action(s->qdev.conf.blk, action, is_read, error); 286 } 287 288 switch (action) { 289 case BLOCK_ERROR_ACTION_REPORT: 290 if (acct_failed) { 291 block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); 292 } 293 if (req_has_sense) { 294 sdc->update_sense(&r->req); 295 } else if (status == CHECK_CONDITION) { 296 scsi_req_build_sense(&r->req, sense); 297 } 298 scsi_req_complete(&r->req, status); 299 return true; 300 301 case BLOCK_ERROR_ACTION_IGNORE: 302 return false; 303 304 case BLOCK_ERROR_ACTION_STOP: 305 scsi_req_retry(&r->req); 306 return true; 307 308 default: 309 g_assert_not_reached(); 310 } 311 } 312 313 static bool scsi_disk_req_check_error(SCSIDiskReq *r, int ret, bool acct_failed) 314 { 315 if (r->req.io_canceled) { 316 scsi_req_cancel_complete(&r->req); 317 return true; 318 } 319 320 if (ret != 0) { 321 return scsi_handle_rw_error(r, ret, acct_failed); 322 } 323 324 return false; 325 } 326 327 static void scsi_aio_complete(void *opaque, int ret) 328 { 329 SCSIDiskReq *r = (SCSIDiskReq *)opaque; 330 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 331 332 /* The request must only run in the BlockBackend's AioContext */ 333 assert(blk_get_aio_context(s->qdev.conf.blk) == 334 qemu_get_current_aio_context()); 335 336 assert(r->req.aiocb != NULL); 337 r->req.aiocb = NULL; 338 339 if (scsi_disk_req_check_error(r, ret, true)) { 340 goto done; 341 } 342 343 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 344 scsi_req_complete(&r->req, GOOD); 345 346 done: 347 scsi_req_unref(&r->req); 348 } 349 350 static bool scsi_is_cmd_fua(SCSICommand *cmd) 351 { 352 switch (cmd->buf[0]) { 353 case READ_10: 354 case READ_12: 355 case READ_16: 356 case WRITE_10: 357 case WRITE_12: 358 case WRITE_16: 359 return (cmd->buf[1] & 8) != 0; 360 361 case VERIFY_10: 362 case VERIFY_12: 363 case VERIFY_16: 364 case WRITE_VERIFY_10: 365 case WRITE_VERIFY_12: 366 case WRITE_VERIFY_16: 367 return true; 368 369 case READ_6: 370 case WRITE_6: 371 default: 372 return false; 373 } 374 } 375 376 static void scsi_write_do_fua(SCSIDiskReq *r) 377 { 378 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 379 380 assert(r->req.aiocb == NULL); 381 assert(!r->req.io_canceled); 382 383 if (r->need_fua_emulation) { 384 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, 385 BLOCK_ACCT_FLUSH); 386 r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); 387 return; 388 } 389 390 scsi_req_complete(&r->req, GOOD); 391 scsi_req_unref(&r->req); 392 } 393 394 static void scsi_dma_complete_noio(SCSIDiskReq *r, int ret) 395 { 396 assert(r->req.aiocb == NULL); 397 if (scsi_disk_req_check_error(r, ret, ret > 0)) { 398 goto done; 399 } 400 401 r->sector += r->sector_count; 402 r->sector_count = 0; 403 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 404 scsi_write_do_fua(r); 405 return; 406 } else { 407 scsi_req_complete(&r->req, GOOD); 408 } 409 410 done: 411 scsi_req_unref(&r->req); 412 } 413 414 /* May not be called in all error cases, don't rely on cleanup here */ 415 static void scsi_dma_complete(void *opaque, int ret) 416 { 417 SCSIDiskReq *r = (SCSIDiskReq *)opaque; 418 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 419 420 assert(r->req.aiocb != NULL); 421 r->req.aiocb = NULL; 422 423 /* ret > 0 is accounted for in scsi_disk_req_check_error() */ 424 if (ret < 0) { 425 block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); 426 } else if (ret == 0) { 427 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 428 } 429 scsi_dma_complete_noio(r, ret); 430 } 431 432 static void scsi_read_complete_noio(SCSIDiskReq *r, int ret) 433 { 434 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 435 uint32_t n; 436 437 /* The request must only run in the BlockBackend's AioContext */ 438 assert(blk_get_aio_context(s->qdev.conf.blk) == 439 qemu_get_current_aio_context()); 440 441 assert(r->req.aiocb == NULL); 442 if (scsi_disk_req_check_error(r, ret, ret > 0)) { 443 goto done; 444 } 445 446 n = r->qiov.size / BDRV_SECTOR_SIZE; 447 r->sector += n; 448 r->sector_count -= n; 449 scsi_req_data(&r->req, r->qiov.size); 450 451 done: 452 scsi_req_unref(&r->req); 453 } 454 455 /* May not be called in all error cases, don't rely on cleanup here */ 456 static void scsi_read_complete(void *opaque, int ret) 457 { 458 SCSIDiskReq *r = (SCSIDiskReq *)opaque; 459 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 460 461 assert(r->req.aiocb != NULL); 462 r->req.aiocb = NULL; 463 464 /* ret > 0 is accounted for in scsi_disk_req_check_error() */ 465 if (ret < 0) { 466 block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); 467 } else if (ret == 0) { 468 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 469 trace_scsi_disk_read_complete(r->req.tag, r->qiov.size); 470 } 471 scsi_read_complete_noio(r, ret); 472 } 473 474 /* Actually issue a read to the block device. */ 475 static void scsi_do_read(SCSIDiskReq *r, int ret) 476 { 477 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 478 SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); 479 480 assert (r->req.aiocb == NULL); 481 if (scsi_disk_req_check_error(r, ret, false)) { 482 goto done; 483 } 484 485 /* The request is used as the AIO opaque value, so add a ref. */ 486 scsi_req_ref(&r->req); 487 488 if (r->req.sg) { 489 dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_READ); 490 r->req.residual -= r->req.sg->size; 491 r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk), 492 r->req.sg, r->sector << BDRV_SECTOR_BITS, 493 BDRV_SECTOR_SIZE, 494 sdc->dma_readv, r, scsi_dma_complete, r, 495 DMA_DIRECTION_FROM_DEVICE); 496 } else { 497 scsi_init_iovec(r, SCSI_DMA_BUF_SIZE); 498 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 499 r->qiov.size, BLOCK_ACCT_READ); 500 r->req.aiocb = sdc->dma_readv(r->sector << BDRV_SECTOR_BITS, &r->qiov, 501 scsi_read_complete, r, r); 502 } 503 504 done: 505 scsi_req_unref(&r->req); 506 } 507 508 static void scsi_do_read_cb(void *opaque, int ret) 509 { 510 SCSIDiskReq *r = (SCSIDiskReq *)opaque; 511 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 512 513 assert (r->req.aiocb != NULL); 514 r->req.aiocb = NULL; 515 516 if (ret < 0) { 517 block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); 518 } else { 519 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 520 } 521 scsi_do_read(opaque, ret); 522 } 523 524 /* Read more data from scsi device into buffer. */ 525 static void scsi_read_data(SCSIRequest *req) 526 { 527 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 528 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 529 bool first; 530 531 trace_scsi_disk_read_data_count(r->sector_count); 532 if (r->sector_count == 0) { 533 /* This also clears the sense buffer for REQUEST SENSE. */ 534 scsi_req_complete(&r->req, GOOD); 535 return; 536 } 537 538 /* No data transfer may already be in progress */ 539 assert(r->req.aiocb == NULL); 540 541 /* The request is used as the AIO opaque value, so add a ref. */ 542 scsi_req_ref(&r->req); 543 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 544 trace_scsi_disk_read_data_invalid(); 545 scsi_read_complete_noio(r, -EINVAL); 546 return; 547 } 548 549 if (!blk_is_available(req->dev->conf.blk)) { 550 scsi_read_complete_noio(r, -ENOMEDIUM); 551 return; 552 } 553 554 first = !r->started; 555 r->started = true; 556 if (first && r->need_fua_emulation) { 557 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, 558 BLOCK_ACCT_FLUSH); 559 r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_do_read_cb, r); 560 } else { 561 scsi_do_read(r, 0); 562 } 563 } 564 565 static void scsi_write_complete_noio(SCSIDiskReq *r, int ret) 566 { 567 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 568 uint32_t n; 569 570 /* The request must only run in the BlockBackend's AioContext */ 571 assert(blk_get_aio_context(s->qdev.conf.blk) == 572 qemu_get_current_aio_context()); 573 574 assert (r->req.aiocb == NULL); 575 if (scsi_disk_req_check_error(r, ret, ret > 0)) { 576 goto done; 577 } 578 579 n = r->qiov.size / BDRV_SECTOR_SIZE; 580 r->sector += n; 581 r->sector_count -= n; 582 if (r->sector_count == 0) { 583 scsi_write_do_fua(r); 584 return; 585 } else { 586 scsi_init_iovec(r, SCSI_DMA_BUF_SIZE); 587 trace_scsi_disk_write_complete_noio(r->req.tag, r->qiov.size); 588 scsi_req_data(&r->req, r->qiov.size); 589 } 590 591 done: 592 scsi_req_unref(&r->req); 593 } 594 595 /* May not be called in all error cases, don't rely on cleanup here */ 596 static void scsi_write_complete(void * opaque, int ret) 597 { 598 SCSIDiskReq *r = (SCSIDiskReq *)opaque; 599 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 600 601 assert (r->req.aiocb != NULL); 602 r->req.aiocb = NULL; 603 604 /* ret > 0 is accounted for in scsi_disk_req_check_error() */ 605 if (ret < 0) { 606 block_acct_failed(blk_get_stats(s->qdev.conf.blk), &r->acct); 607 } else if (ret == 0) { 608 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 609 } 610 scsi_write_complete_noio(r, ret); 611 } 612 613 static void scsi_write_data(SCSIRequest *req) 614 { 615 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 616 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 617 SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); 618 619 /* No data transfer may already be in progress */ 620 assert(r->req.aiocb == NULL); 621 622 /* The request is used as the AIO opaque value, so add a ref. */ 623 scsi_req_ref(&r->req); 624 if (r->req.cmd.mode != SCSI_XFER_TO_DEV) { 625 trace_scsi_disk_write_data_invalid(); 626 scsi_write_complete_noio(r, -EINVAL); 627 return; 628 } 629 630 if (!r->req.sg && !r->qiov.size) { 631 /* Called for the first time. Ask the driver to send us more data. */ 632 r->started = true; 633 scsi_write_complete_noio(r, 0); 634 return; 635 } 636 if (!blk_is_available(req->dev->conf.blk)) { 637 scsi_write_complete_noio(r, -ENOMEDIUM); 638 return; 639 } 640 641 if (r->req.cmd.buf[0] == VERIFY_10 || r->req.cmd.buf[0] == VERIFY_12 || 642 r->req.cmd.buf[0] == VERIFY_16) { 643 if (r->req.sg) { 644 scsi_dma_complete_noio(r, 0); 645 } else { 646 scsi_write_complete_noio(r, 0); 647 } 648 return; 649 } 650 651 if (r->req.sg) { 652 dma_acct_start(s->qdev.conf.blk, &r->acct, r->req.sg, BLOCK_ACCT_WRITE); 653 r->req.residual -= r->req.sg->size; 654 r->req.aiocb = dma_blk_io(blk_get_aio_context(s->qdev.conf.blk), 655 r->req.sg, r->sector << BDRV_SECTOR_BITS, 656 BDRV_SECTOR_SIZE, 657 sdc->dma_writev, r, scsi_dma_complete, r, 658 DMA_DIRECTION_TO_DEVICE); 659 } else { 660 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 661 r->qiov.size, BLOCK_ACCT_WRITE); 662 r->req.aiocb = sdc->dma_writev(r->sector << BDRV_SECTOR_BITS, &r->qiov, 663 scsi_write_complete, r, r); 664 } 665 } 666 667 /* Return a pointer to the data buffer. */ 668 static uint8_t *scsi_get_buf(SCSIRequest *req) 669 { 670 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 671 672 return (uint8_t *)r->iov.iov_base; 673 } 674 675 static int scsi_disk_emulate_vpd_page(SCSIRequest *req, uint8_t *outbuf) 676 { 677 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 678 uint8_t page_code = req->cmd.buf[2]; 679 int start, buflen = 0; 680 681 outbuf[buflen++] = s->qdev.type & 0x1f; 682 outbuf[buflen++] = page_code; 683 outbuf[buflen++] = 0x00; 684 outbuf[buflen++] = 0x00; 685 start = buflen; 686 687 switch (page_code) { 688 case 0x00: /* Supported page codes, mandatory */ 689 { 690 trace_scsi_disk_emulate_vpd_page_00(req->cmd.xfer); 691 outbuf[buflen++] = 0x00; /* list of supported pages (this page) */ 692 if (s->serial) { 693 outbuf[buflen++] = 0x80; /* unit serial number */ 694 } 695 outbuf[buflen++] = 0x83; /* device identification */ 696 if (s->qdev.type == TYPE_DISK) { 697 outbuf[buflen++] = 0xb0; /* block limits */ 698 outbuf[buflen++] = 0xb1; /* block device characteristics */ 699 outbuf[buflen++] = 0xb2; /* thin provisioning */ 700 } 701 break; 702 } 703 case 0x80: /* Device serial number, optional */ 704 { 705 int l; 706 707 if (!s->serial) { 708 trace_scsi_disk_emulate_vpd_page_80_not_supported(); 709 return -1; 710 } 711 712 l = strlen(s->serial); 713 if (l > MAX_SERIAL_LEN) { 714 l = MAX_SERIAL_LEN; 715 } 716 717 trace_scsi_disk_emulate_vpd_page_80(req->cmd.xfer); 718 memcpy(outbuf + buflen, s->serial, l); 719 buflen += l; 720 break; 721 } 722 723 case 0x83: /* Device identification page, mandatory */ 724 { 725 int id_len = s->device_id ? MIN(strlen(s->device_id), 255 - 8) : 0; 726 727 trace_scsi_disk_emulate_vpd_page_83(req->cmd.xfer); 728 729 if (id_len) { 730 outbuf[buflen++] = 0x2; /* ASCII */ 731 outbuf[buflen++] = 0; /* not officially assigned */ 732 outbuf[buflen++] = 0; /* reserved */ 733 outbuf[buflen++] = id_len; /* length of data following */ 734 memcpy(outbuf + buflen, s->device_id, id_len); 735 buflen += id_len; 736 } 737 738 if (s->qdev.wwn) { 739 outbuf[buflen++] = 0x1; /* Binary */ 740 outbuf[buflen++] = 0x3; /* NAA */ 741 outbuf[buflen++] = 0; /* reserved */ 742 outbuf[buflen++] = 8; 743 stq_be_p(&outbuf[buflen], s->qdev.wwn); 744 buflen += 8; 745 } 746 747 if (s->qdev.port_wwn) { 748 outbuf[buflen++] = 0x61; /* SAS / Binary */ 749 outbuf[buflen++] = 0x93; /* PIV / Target port / NAA */ 750 outbuf[buflen++] = 0; /* reserved */ 751 outbuf[buflen++] = 8; 752 stq_be_p(&outbuf[buflen], s->qdev.port_wwn); 753 buflen += 8; 754 } 755 756 if (s->port_index) { 757 outbuf[buflen++] = 0x61; /* SAS / Binary */ 758 759 /* PIV/Target port/relative target port */ 760 outbuf[buflen++] = 0x94; 761 762 outbuf[buflen++] = 0; /* reserved */ 763 outbuf[buflen++] = 4; 764 stw_be_p(&outbuf[buflen + 2], s->port_index); 765 buflen += 4; 766 } 767 break; 768 } 769 case 0xb0: /* block limits */ 770 { 771 SCSIBlockLimits bl = {}; 772 773 if (s->qdev.type == TYPE_ROM) { 774 trace_scsi_disk_emulate_vpd_page_b0_not_supported(); 775 return -1; 776 } 777 bl.wsnz = 1; 778 bl.unmap_sectors = 779 s->qdev.conf.discard_granularity / s->qdev.blocksize; 780 bl.min_io_size = 781 s->qdev.conf.min_io_size / s->qdev.blocksize; 782 bl.opt_io_size = 783 s->qdev.conf.opt_io_size / s->qdev.blocksize; 784 bl.max_unmap_sectors = 785 s->max_unmap_size / s->qdev.blocksize; 786 bl.max_io_sectors = 787 s->max_io_size / s->qdev.blocksize; 788 /* 255 descriptors fit in 4 KiB with an 8-byte header */ 789 bl.max_unmap_descr = 255; 790 791 if (s->qdev.type == TYPE_DISK) { 792 int max_transfer_blk = blk_get_max_transfer(s->qdev.conf.blk); 793 int max_io_sectors_blk = 794 max_transfer_blk / s->qdev.blocksize; 795 796 bl.max_io_sectors = 797 MIN_NON_ZERO(max_io_sectors_blk, bl.max_io_sectors); 798 } 799 buflen += scsi_emulate_block_limits(outbuf + buflen, &bl); 800 break; 801 } 802 case 0xb1: /* block device characteristics */ 803 { 804 buflen = 0x40; 805 outbuf[4] = (s->rotation_rate >> 8) & 0xff; 806 outbuf[5] = s->rotation_rate & 0xff; 807 outbuf[6] = 0; /* PRODUCT TYPE */ 808 outbuf[7] = 0; /* WABEREQ | WACEREQ | NOMINAL FORM FACTOR */ 809 outbuf[8] = 0; /* VBULS */ 810 break; 811 } 812 case 0xb2: /* thin provisioning */ 813 { 814 buflen = 8; 815 outbuf[4] = 0; 816 outbuf[5] = 0xe0; /* unmap & write_same 10/16 all supported */ 817 outbuf[6] = s->qdev.conf.discard_granularity ? 2 : 1; 818 outbuf[7] = 0; 819 break; 820 } 821 default: 822 return -1; 823 } 824 /* done with EVPD */ 825 assert(buflen - start <= 255); 826 outbuf[start - 1] = buflen - start; 827 return buflen; 828 } 829 830 static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf) 831 { 832 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 833 int buflen = 0; 834 835 if (req->cmd.buf[1] & 0x1) { 836 /* Vital product data */ 837 return scsi_disk_emulate_vpd_page(req, outbuf); 838 } 839 840 /* Standard INQUIRY data */ 841 if (req->cmd.buf[2] != 0) { 842 return -1; 843 } 844 845 /* PAGE CODE == 0 */ 846 buflen = req->cmd.xfer; 847 if (buflen > SCSI_MAX_INQUIRY_LEN) { 848 buflen = SCSI_MAX_INQUIRY_LEN; 849 } 850 851 outbuf[0] = s->qdev.type & 0x1f; 852 outbuf[1] = (s->features & (1 << SCSI_DISK_F_REMOVABLE)) ? 0x80 : 0; 853 854 strpadcpy((char *) &outbuf[16], 16, s->product, ' '); 855 strpadcpy((char *) &outbuf[8], 8, s->vendor, ' '); 856 857 memset(&outbuf[32], 0, 4); 858 memcpy(&outbuf[32], s->version, MIN(4, strlen(s->version))); 859 /* 860 * We claim conformance to SPC-3, which is required for guests 861 * to ask for modern features like READ CAPACITY(16) or the 862 * block characteristics VPD page by default. Not all of SPC-3 863 * is actually implemented, but we're good enough. 864 */ 865 outbuf[2] = s->qdev.default_scsi_version; 866 outbuf[3] = 2 | 0x10; /* Format 2, HiSup */ 867 868 if (buflen > 36) { 869 outbuf[4] = buflen - 5; /* Additional Length = (Len - 1) - 4 */ 870 } else { 871 /* If the allocation length of CDB is too small, 872 the additional length is not adjusted */ 873 outbuf[4] = 36 - 5; 874 } 875 876 /* Sync data transfer and TCQ. */ 877 outbuf[7] = 0x10 | (req->bus->info->tcq ? 0x02 : 0); 878 return buflen; 879 } 880 881 static inline bool media_is_dvd(SCSIDiskState *s) 882 { 883 uint64_t nb_sectors; 884 if (s->qdev.type != TYPE_ROM) { 885 return false; 886 } 887 if (!blk_is_available(s->qdev.conf.blk)) { 888 return false; 889 } 890 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 891 return nb_sectors > CD_MAX_SECTORS; 892 } 893 894 static inline bool media_is_cd(SCSIDiskState *s) 895 { 896 uint64_t nb_sectors; 897 if (s->qdev.type != TYPE_ROM) { 898 return false; 899 } 900 if (!blk_is_available(s->qdev.conf.blk)) { 901 return false; 902 } 903 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 904 return nb_sectors <= CD_MAX_SECTORS; 905 } 906 907 static int scsi_read_disc_information(SCSIDiskState *s, SCSIDiskReq *r, 908 uint8_t *outbuf) 909 { 910 uint8_t type = r->req.cmd.buf[1] & 7; 911 912 if (s->qdev.type != TYPE_ROM) { 913 return -1; 914 } 915 916 /* Types 1/2 are only defined for Blu-Ray. */ 917 if (type != 0) { 918 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 919 return -1; 920 } 921 922 memset(outbuf, 0, 34); 923 outbuf[1] = 32; 924 outbuf[2] = 0xe; /* last session complete, disc finalized */ 925 outbuf[3] = 1; /* first track on disc */ 926 outbuf[4] = 1; /* # of sessions */ 927 outbuf[5] = 1; /* first track of last session */ 928 outbuf[6] = 1; /* last track of last session */ 929 outbuf[7] = 0x20; /* unrestricted use */ 930 outbuf[8] = 0x00; /* CD-ROM or DVD-ROM */ 931 /* 9-10-11: most significant byte corresponding bytes 4-5-6 */ 932 /* 12-23: not meaningful for CD-ROM or DVD-ROM */ 933 /* 24-31: disc bar code */ 934 /* 32: disc application code */ 935 /* 33: number of OPC tables */ 936 937 return 34; 938 } 939 940 static int scsi_read_dvd_structure(SCSIDiskState *s, SCSIDiskReq *r, 941 uint8_t *outbuf) 942 { 943 static const int rds_caps_size[5] = { 944 [0] = 2048 + 4, 945 [1] = 4 + 4, 946 [3] = 188 + 4, 947 [4] = 2048 + 4, 948 }; 949 950 uint8_t media = r->req.cmd.buf[1]; 951 uint8_t layer = r->req.cmd.buf[6]; 952 uint8_t format = r->req.cmd.buf[7]; 953 int size = -1; 954 955 if (s->qdev.type != TYPE_ROM) { 956 return -1; 957 } 958 if (media != 0) { 959 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 960 return -1; 961 } 962 963 if (format != 0xff) { 964 if (!blk_is_available(s->qdev.conf.blk)) { 965 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); 966 return -1; 967 } 968 if (media_is_cd(s)) { 969 scsi_check_condition(r, SENSE_CODE(INCOMPATIBLE_FORMAT)); 970 return -1; 971 } 972 if (format >= ARRAY_SIZE(rds_caps_size)) { 973 return -1; 974 } 975 size = rds_caps_size[format]; 976 memset(outbuf, 0, size); 977 } 978 979 switch (format) { 980 case 0x00: { 981 /* Physical format information */ 982 uint64_t nb_sectors; 983 if (layer != 0) { 984 goto fail; 985 } 986 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 987 988 outbuf[4] = 1; /* DVD-ROM, part version 1 */ 989 outbuf[5] = 0xf; /* 120mm disc, minimum rate unspecified */ 990 outbuf[6] = 1; /* one layer, read-only (per MMC-2 spec) */ 991 outbuf[7] = 0; /* default densities */ 992 993 stl_be_p(&outbuf[12], (nb_sectors >> 2) - 1); /* end sector */ 994 stl_be_p(&outbuf[16], (nb_sectors >> 2) - 1); /* l0 end sector */ 995 break; 996 } 997 998 case 0x01: /* DVD copyright information, all zeros */ 999 break; 1000 1001 case 0x03: /* BCA information - invalid field for no BCA info */ 1002 return -1; 1003 1004 case 0x04: /* DVD disc manufacturing information, all zeros */ 1005 break; 1006 1007 case 0xff: { /* List capabilities */ 1008 int i; 1009 size = 4; 1010 for (i = 0; i < ARRAY_SIZE(rds_caps_size); i++) { 1011 if (!rds_caps_size[i]) { 1012 continue; 1013 } 1014 outbuf[size] = i; 1015 outbuf[size + 1] = 0x40; /* Not writable, readable */ 1016 stw_be_p(&outbuf[size + 2], rds_caps_size[i]); 1017 size += 4; 1018 } 1019 break; 1020 } 1021 1022 default: 1023 return -1; 1024 } 1025 1026 /* Size of buffer, not including 2 byte size field */ 1027 stw_be_p(outbuf, size - 2); 1028 return size; 1029 1030 fail: 1031 return -1; 1032 } 1033 1034 static int scsi_event_status_media(SCSIDiskState *s, uint8_t *outbuf) 1035 { 1036 uint8_t event_code, media_status; 1037 1038 media_status = 0; 1039 if (s->tray_open) { 1040 media_status = MS_TRAY_OPEN; 1041 } else if (blk_is_inserted(s->qdev.conf.blk)) { 1042 media_status = MS_MEDIA_PRESENT; 1043 } 1044 1045 /* Event notification descriptor */ 1046 event_code = MEC_NO_CHANGE; 1047 if (media_status != MS_TRAY_OPEN) { 1048 if (s->media_event) { 1049 event_code = MEC_NEW_MEDIA; 1050 s->media_event = false; 1051 } else if (s->eject_request) { 1052 event_code = MEC_EJECT_REQUESTED; 1053 s->eject_request = false; 1054 } 1055 } 1056 1057 outbuf[0] = event_code; 1058 outbuf[1] = media_status; 1059 1060 /* These fields are reserved, just clear them. */ 1061 outbuf[2] = 0; 1062 outbuf[3] = 0; 1063 return 4; 1064 } 1065 1066 static int scsi_get_event_status_notification(SCSIDiskState *s, SCSIDiskReq *r, 1067 uint8_t *outbuf) 1068 { 1069 int size; 1070 uint8_t *buf = r->req.cmd.buf; 1071 uint8_t notification_class_request = buf[4]; 1072 if (s->qdev.type != TYPE_ROM) { 1073 return -1; 1074 } 1075 if ((buf[1] & 1) == 0) { 1076 /* asynchronous */ 1077 return -1; 1078 } 1079 1080 size = 4; 1081 outbuf[0] = outbuf[1] = 0; 1082 outbuf[3] = 1 << GESN_MEDIA; /* supported events */ 1083 if (notification_class_request & (1 << GESN_MEDIA)) { 1084 outbuf[2] = GESN_MEDIA; 1085 size += scsi_event_status_media(s, &outbuf[size]); 1086 } else { 1087 outbuf[2] = 0x80; 1088 } 1089 stw_be_p(outbuf, size - 4); 1090 return size; 1091 } 1092 1093 static int scsi_get_configuration(SCSIDiskState *s, uint8_t *outbuf) 1094 { 1095 int current; 1096 1097 if (s->qdev.type != TYPE_ROM) { 1098 return -1; 1099 } 1100 1101 if (media_is_dvd(s)) { 1102 current = MMC_PROFILE_DVD_ROM; 1103 } else if (media_is_cd(s)) { 1104 current = MMC_PROFILE_CD_ROM; 1105 } else { 1106 current = MMC_PROFILE_NONE; 1107 } 1108 1109 memset(outbuf, 0, 40); 1110 stl_be_p(&outbuf[0], 36); /* Bytes after the data length field */ 1111 stw_be_p(&outbuf[6], current); 1112 /* outbuf[8] - outbuf[19]: Feature 0 - Profile list */ 1113 outbuf[10] = 0x03; /* persistent, current */ 1114 outbuf[11] = 8; /* two profiles */ 1115 stw_be_p(&outbuf[12], MMC_PROFILE_DVD_ROM); 1116 outbuf[14] = (current == MMC_PROFILE_DVD_ROM); 1117 stw_be_p(&outbuf[16], MMC_PROFILE_CD_ROM); 1118 outbuf[18] = (current == MMC_PROFILE_CD_ROM); 1119 /* outbuf[20] - outbuf[31]: Feature 1 - Core feature */ 1120 stw_be_p(&outbuf[20], 1); 1121 outbuf[22] = 0x08 | 0x03; /* version 2, persistent, current */ 1122 outbuf[23] = 8; 1123 stl_be_p(&outbuf[24], 1); /* SCSI */ 1124 outbuf[28] = 1; /* DBE = 1, mandatory */ 1125 /* outbuf[32] - outbuf[39]: Feature 3 - Removable media feature */ 1126 stw_be_p(&outbuf[32], 3); 1127 outbuf[34] = 0x08 | 0x03; /* version 2, persistent, current */ 1128 outbuf[35] = 4; 1129 outbuf[36] = 0x39; /* tray, load=1, eject=1, unlocked at powerup, lock=1 */ 1130 /* TODO: Random readable, CD read, DVD read, drive serial number, 1131 power management */ 1132 return 40; 1133 } 1134 1135 static int scsi_emulate_mechanism_status(SCSIDiskState *s, uint8_t *outbuf) 1136 { 1137 if (s->qdev.type != TYPE_ROM) { 1138 return -1; 1139 } 1140 memset(outbuf, 0, 8); 1141 outbuf[5] = 1; /* CD-ROM */ 1142 return 8; 1143 } 1144 1145 static int mode_sense_page(SCSIDiskState *s, int page, uint8_t **p_outbuf, 1146 int page_control) 1147 { 1148 static const int mode_sense_valid[0x3f] = { 1149 [MODE_PAGE_VENDOR_SPECIFIC] = (1 << TYPE_DISK) | (1 << TYPE_ROM), 1150 [MODE_PAGE_HD_GEOMETRY] = (1 << TYPE_DISK), 1151 [MODE_PAGE_FLEXIBLE_DISK_GEOMETRY] = (1 << TYPE_DISK), 1152 [MODE_PAGE_CACHING] = (1 << TYPE_DISK) | (1 << TYPE_ROM), 1153 [MODE_PAGE_R_W_ERROR] = (1 << TYPE_DISK) | (1 << TYPE_ROM), 1154 [MODE_PAGE_AUDIO_CTL] = (1 << TYPE_ROM), 1155 [MODE_PAGE_CAPABILITIES] = (1 << TYPE_ROM), 1156 [MODE_PAGE_APPLE_VENDOR] = (1 << TYPE_ROM), 1157 }; 1158 1159 uint8_t *p = *p_outbuf + 2; 1160 int length; 1161 1162 assert(page < ARRAY_SIZE(mode_sense_valid)); 1163 if ((mode_sense_valid[page] & (1 << s->qdev.type)) == 0) { 1164 return -1; 1165 } 1166 1167 /* 1168 * If Changeable Values are requested, a mask denoting those mode parameters 1169 * that are changeable shall be returned. As we currently don't support 1170 * parameter changes via MODE_SELECT all bits are returned set to zero. 1171 * The buffer was already menset to zero by the caller of this function. 1172 * 1173 * The offsets here are off by two compared to the descriptions in the 1174 * SCSI specs, because those include a 2-byte header. This is unfortunate, 1175 * but it is done so that offsets are consistent within our implementation 1176 * of MODE SENSE and MODE SELECT. MODE SELECT has to deal with both 1177 * 2-byte and 4-byte headers. 1178 */ 1179 switch (page) { 1180 case MODE_PAGE_HD_GEOMETRY: 1181 length = 0x16; 1182 if (page_control == 1) { /* Changeable Values */ 1183 break; 1184 } 1185 /* if a geometry hint is available, use it */ 1186 p[0] = (s->qdev.conf.cyls >> 16) & 0xff; 1187 p[1] = (s->qdev.conf.cyls >> 8) & 0xff; 1188 p[2] = s->qdev.conf.cyls & 0xff; 1189 p[3] = s->qdev.conf.heads & 0xff; 1190 /* Write precomp start cylinder, disabled */ 1191 p[4] = (s->qdev.conf.cyls >> 16) & 0xff; 1192 p[5] = (s->qdev.conf.cyls >> 8) & 0xff; 1193 p[6] = s->qdev.conf.cyls & 0xff; 1194 /* Reduced current start cylinder, disabled */ 1195 p[7] = (s->qdev.conf.cyls >> 16) & 0xff; 1196 p[8] = (s->qdev.conf.cyls >> 8) & 0xff; 1197 p[9] = s->qdev.conf.cyls & 0xff; 1198 /* Device step rate [ns], 200ns */ 1199 p[10] = 0; 1200 p[11] = 200; 1201 /* Landing zone cylinder */ 1202 p[12] = 0xff; 1203 p[13] = 0xff; 1204 p[14] = 0xff; 1205 /* Medium rotation rate [rpm], 5400 rpm */ 1206 p[18] = (5400 >> 8) & 0xff; 1207 p[19] = 5400 & 0xff; 1208 break; 1209 1210 case MODE_PAGE_FLEXIBLE_DISK_GEOMETRY: 1211 length = 0x1e; 1212 if (page_control == 1) { /* Changeable Values */ 1213 break; 1214 } 1215 /* Transfer rate [kbit/s], 5Mbit/s */ 1216 p[0] = 5000 >> 8; 1217 p[1] = 5000 & 0xff; 1218 /* if a geometry hint is available, use it */ 1219 p[2] = s->qdev.conf.heads & 0xff; 1220 p[3] = s->qdev.conf.secs & 0xff; 1221 p[4] = s->qdev.blocksize >> 8; 1222 p[6] = (s->qdev.conf.cyls >> 8) & 0xff; 1223 p[7] = s->qdev.conf.cyls & 0xff; 1224 /* Write precomp start cylinder, disabled */ 1225 p[8] = (s->qdev.conf.cyls >> 8) & 0xff; 1226 p[9] = s->qdev.conf.cyls & 0xff; 1227 /* Reduced current start cylinder, disabled */ 1228 p[10] = (s->qdev.conf.cyls >> 8) & 0xff; 1229 p[11] = s->qdev.conf.cyls & 0xff; 1230 /* Device step rate [100us], 100us */ 1231 p[12] = 0; 1232 p[13] = 1; 1233 /* Device step pulse width [us], 1us */ 1234 p[14] = 1; 1235 /* Device head settle delay [100us], 100us */ 1236 p[15] = 0; 1237 p[16] = 1; 1238 /* Motor on delay [0.1s], 0.1s */ 1239 p[17] = 1; 1240 /* Motor off delay [0.1s], 0.1s */ 1241 p[18] = 1; 1242 /* Medium rotation rate [rpm], 5400 rpm */ 1243 p[26] = (5400 >> 8) & 0xff; 1244 p[27] = 5400 & 0xff; 1245 break; 1246 1247 case MODE_PAGE_CACHING: 1248 length = 0x12; 1249 if (page_control == 1 || /* Changeable Values */ 1250 blk_enable_write_cache(s->qdev.conf.blk)) { 1251 p[0] = 4; /* WCE */ 1252 } 1253 break; 1254 1255 case MODE_PAGE_R_W_ERROR: 1256 length = 10; 1257 if (page_control == 1) { /* Changeable Values */ 1258 if (s->qdev.type == TYPE_ROM) { 1259 /* Automatic Write Reallocation Enabled */ 1260 p[0] = 0x80; 1261 } 1262 break; 1263 } 1264 p[0] = 0x80; /* Automatic Write Reallocation Enabled */ 1265 if (s->qdev.type == TYPE_ROM) { 1266 p[1] = 0x20; /* Read Retry Count */ 1267 } 1268 break; 1269 1270 case MODE_PAGE_AUDIO_CTL: 1271 length = 14; 1272 break; 1273 1274 case MODE_PAGE_CAPABILITIES: 1275 length = 0x14; 1276 if (page_control == 1) { /* Changeable Values */ 1277 break; 1278 } 1279 1280 p[0] = 0x3b; /* CD-R & CD-RW read */ 1281 p[1] = 0; /* Writing not supported */ 1282 p[2] = 0x7f; /* Audio, composite, digital out, 1283 mode 2 form 1&2, multi session */ 1284 p[3] = 0xff; /* CD DA, DA accurate, RW supported, 1285 RW corrected, C2 errors, ISRC, 1286 UPC, Bar code */ 1287 p[4] = 0x2d | (s->tray_locked ? 2 : 0); 1288 /* Locking supported, jumper present, eject, tray */ 1289 p[5] = 0; /* no volume & mute control, no 1290 changer */ 1291 p[6] = (50 * 176) >> 8; /* 50x read speed */ 1292 p[7] = (50 * 176) & 0xff; 1293 p[8] = 2 >> 8; /* Two volume levels */ 1294 p[9] = 2 & 0xff; 1295 p[10] = 2048 >> 8; /* 2M buffer */ 1296 p[11] = 2048 & 0xff; 1297 p[12] = (16 * 176) >> 8; /* 16x read speed current */ 1298 p[13] = (16 * 176) & 0xff; 1299 p[16] = (16 * 176) >> 8; /* 16x write speed */ 1300 p[17] = (16 * 176) & 0xff; 1301 p[18] = (16 * 176) >> 8; /* 16x write speed current */ 1302 p[19] = (16 * 176) & 0xff; 1303 break; 1304 1305 case MODE_PAGE_APPLE_VENDOR: 1306 if (s->quirks & (1 << SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR)) { 1307 length = 0x1e; 1308 if (page_control == 1) { /* Changeable Values */ 1309 break; 1310 } 1311 1312 memset(p, 0, length); 1313 strcpy((char *)p + 8, "APPLE COMPUTER, INC "); 1314 break; 1315 } else { 1316 return -1; 1317 } 1318 1319 case MODE_PAGE_VENDOR_SPECIFIC: 1320 if (s->qdev.type == TYPE_DISK && (s->quirks & 1321 (1 << SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE))) { 1322 length = 0x2; 1323 if (page_control == 1) { /* Changeable Values */ 1324 p[0] = 0xff; 1325 p[1] = 0xff; 1326 break; 1327 } 1328 p[0] = 0; 1329 p[1] = 0; 1330 break; 1331 } else { 1332 return -1; 1333 } 1334 1335 default: 1336 return -1; 1337 } 1338 1339 assert(length < 256); 1340 (*p_outbuf)[0] = page; 1341 (*p_outbuf)[1] = length; 1342 *p_outbuf += length + 2; 1343 return length + 2; 1344 } 1345 1346 static int scsi_disk_emulate_mode_sense(SCSIDiskReq *r, uint8_t *outbuf) 1347 { 1348 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1349 uint64_t nb_sectors; 1350 bool dbd; 1351 int page, buflen, ret, page_control; 1352 uint8_t *p; 1353 uint8_t dev_specific_param; 1354 1355 dbd = (r->req.cmd.buf[1] & 0x8) != 0; 1356 page = r->req.cmd.buf[2] & 0x3f; 1357 page_control = (r->req.cmd.buf[2] & 0xc0) >> 6; 1358 1359 trace_scsi_disk_emulate_mode_sense((r->req.cmd.buf[0] == MODE_SENSE) ? 6 : 1360 10, page, r->req.cmd.xfer, page_control); 1361 memset(outbuf, 0, r->req.cmd.xfer); 1362 p = outbuf; 1363 1364 if (s->qdev.type == TYPE_DISK) { 1365 dev_specific_param = s->features & (1 << SCSI_DISK_F_DPOFUA) ? 0x10 : 0; 1366 if (!blk_is_writable(s->qdev.conf.blk)) { 1367 dev_specific_param |= 0x80; /* Readonly. */ 1368 } 1369 } else { 1370 if (s->quirks & (1 << SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD)) { 1371 /* Use DBD from the request... */ 1372 dev_specific_param = 0x00; 1373 1374 /* 1375 * ... unless we receive a request for MODE_PAGE_APPLE_VENDOR 1376 * which should never return a block descriptor even though DBD is 1377 * not set, otherwise CDROM detection fails in MacOS 1378 */ 1379 if (s->quirks & (1 << SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR) && 1380 page == MODE_PAGE_APPLE_VENDOR) { 1381 dbd = true; 1382 } 1383 } else { 1384 /* 1385 * MMC prescribes that CD/DVD drives have no block descriptors, 1386 * and defines no device-specific parameter. 1387 */ 1388 dev_specific_param = 0x00; 1389 dbd = true; 1390 } 1391 } 1392 1393 if (r->req.cmd.buf[0] == MODE_SENSE) { 1394 p[1] = 0; /* Default media type. */ 1395 p[2] = dev_specific_param; 1396 p[3] = 0; /* Block descriptor length. */ 1397 p += 4; 1398 } else { /* MODE_SENSE_10 */ 1399 p[2] = 0; /* Default media type. */ 1400 p[3] = dev_specific_param; 1401 p[6] = p[7] = 0; /* Block descriptor length. */ 1402 p += 8; 1403 } 1404 1405 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 1406 if (!dbd && nb_sectors) { 1407 if (r->req.cmd.buf[0] == MODE_SENSE) { 1408 outbuf[3] = 8; /* Block descriptor length */ 1409 } else { /* MODE_SENSE_10 */ 1410 outbuf[7] = 8; /* Block descriptor length */ 1411 } 1412 nb_sectors /= (s->qdev.blocksize / BDRV_SECTOR_SIZE); 1413 if (nb_sectors > 0xffffff) { 1414 nb_sectors = 0; 1415 } 1416 p[0] = 0; /* media density code */ 1417 p[1] = (nb_sectors >> 16) & 0xff; 1418 p[2] = (nb_sectors >> 8) & 0xff; 1419 p[3] = nb_sectors & 0xff; 1420 p[4] = 0; /* reserved */ 1421 p[5] = 0; /* bytes 5-7 are the sector size in bytes */ 1422 p[6] = s->qdev.blocksize >> 8; 1423 p[7] = 0; 1424 p += 8; 1425 } 1426 1427 if (page_control == 3) { 1428 /* Saved Values */ 1429 scsi_check_condition(r, SENSE_CODE(SAVING_PARAMS_NOT_SUPPORTED)); 1430 return -1; 1431 } 1432 1433 if (page == 0x3f) { 1434 for (page = 0; page <= 0x3e; page++) { 1435 mode_sense_page(s, page, &p, page_control); 1436 } 1437 } else { 1438 ret = mode_sense_page(s, page, &p, page_control); 1439 if (ret == -1) { 1440 return -1; 1441 } 1442 } 1443 1444 buflen = p - outbuf; 1445 /* 1446 * The mode data length field specifies the length in bytes of the 1447 * following data that is available to be transferred. The mode data 1448 * length does not include itself. 1449 */ 1450 if (r->req.cmd.buf[0] == MODE_SENSE) { 1451 outbuf[0] = buflen - 1; 1452 } else { /* MODE_SENSE_10 */ 1453 outbuf[0] = ((buflen - 2) >> 8) & 0xff; 1454 outbuf[1] = (buflen - 2) & 0xff; 1455 } 1456 return buflen; 1457 } 1458 1459 static int scsi_disk_emulate_read_toc(SCSIRequest *req, uint8_t *outbuf) 1460 { 1461 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 1462 int start_track, format, msf, toclen; 1463 uint64_t nb_sectors; 1464 1465 msf = req->cmd.buf[1] & 2; 1466 format = req->cmd.buf[2] & 0xf; 1467 start_track = req->cmd.buf[6]; 1468 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 1469 trace_scsi_disk_emulate_read_toc(start_track, format, msf >> 1); 1470 nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; 1471 switch (format) { 1472 case 0: 1473 toclen = cdrom_read_toc(nb_sectors, outbuf, msf, start_track); 1474 break; 1475 case 1: 1476 /* multi session : only a single session defined */ 1477 toclen = 12; 1478 memset(outbuf, 0, 12); 1479 outbuf[1] = 0x0a; 1480 outbuf[2] = 0x01; 1481 outbuf[3] = 0x01; 1482 break; 1483 case 2: 1484 toclen = cdrom_read_toc_raw(nb_sectors, outbuf, msf, start_track); 1485 break; 1486 default: 1487 return -1; 1488 } 1489 return toclen; 1490 } 1491 1492 static int scsi_disk_emulate_start_stop(SCSIDiskReq *r) 1493 { 1494 SCSIRequest *req = &r->req; 1495 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 1496 bool start = req->cmd.buf[4] & 1; 1497 bool loej = req->cmd.buf[4] & 2; /* load on start, eject on !start */ 1498 int pwrcnd = req->cmd.buf[4] & 0xf0; 1499 1500 if (pwrcnd) { 1501 /* eject/load only happens for power condition == 0 */ 1502 return 0; 1503 } 1504 1505 if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && loej) { 1506 if (!start && !s->tray_open && s->tray_locked) { 1507 scsi_check_condition(r, 1508 blk_is_inserted(s->qdev.conf.blk) 1509 ? SENSE_CODE(ILLEGAL_REQ_REMOVAL_PREVENTED) 1510 : SENSE_CODE(NOT_READY_REMOVAL_PREVENTED)); 1511 return -1; 1512 } 1513 1514 if (s->tray_open != !start) { 1515 blk_eject(s->qdev.conf.blk, !start); 1516 s->tray_open = !start; 1517 } 1518 } 1519 return 0; 1520 } 1521 1522 static void scsi_disk_emulate_read_data(SCSIRequest *req) 1523 { 1524 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 1525 int buflen = r->iov.iov_len; 1526 1527 if (buflen) { 1528 trace_scsi_disk_emulate_read_data(buflen); 1529 r->iov.iov_len = 0; 1530 r->started = true; 1531 scsi_req_data(&r->req, buflen); 1532 return; 1533 } 1534 1535 /* This also clears the sense buffer for REQUEST SENSE. */ 1536 scsi_req_complete(&r->req, GOOD); 1537 } 1538 1539 static int scsi_disk_check_mode_select(SCSIDiskState *s, int page, 1540 uint8_t *inbuf, int inlen) 1541 { 1542 uint8_t mode_current[SCSI_MAX_MODE_LEN]; 1543 uint8_t mode_changeable[SCSI_MAX_MODE_LEN]; 1544 uint8_t *p; 1545 int len, expected_len, changeable_len, i; 1546 1547 /* The input buffer does not include the page header, so it is 1548 * off by 2 bytes. 1549 */ 1550 expected_len = inlen + 2; 1551 if (expected_len > SCSI_MAX_MODE_LEN) { 1552 return -1; 1553 } 1554 1555 /* MODE_PAGE_ALLS is only valid for MODE SENSE commands */ 1556 if (page == MODE_PAGE_ALLS) { 1557 return -1; 1558 } 1559 1560 p = mode_current; 1561 memset(mode_current, 0, inlen + 2); 1562 len = mode_sense_page(s, page, &p, 0); 1563 if (len < 0 || len != expected_len) { 1564 return -1; 1565 } 1566 1567 p = mode_changeable; 1568 memset(mode_changeable, 0, inlen + 2); 1569 changeable_len = mode_sense_page(s, page, &p, 1); 1570 assert(changeable_len == len); 1571 1572 /* Check that unchangeable bits are the same as what MODE SENSE 1573 * would return. 1574 */ 1575 for (i = 2; i < len; i++) { 1576 if (((mode_current[i] ^ inbuf[i - 2]) & ~mode_changeable[i]) != 0) { 1577 return -1; 1578 } 1579 } 1580 return 0; 1581 } 1582 1583 static void scsi_disk_apply_mode_select(SCSIDiskState *s, int page, uint8_t *p) 1584 { 1585 switch (page) { 1586 case MODE_PAGE_CACHING: 1587 blk_set_enable_write_cache(s->qdev.conf.blk, (p[0] & 4) != 0); 1588 break; 1589 1590 default: 1591 break; 1592 } 1593 } 1594 1595 static int mode_select_pages(SCSIDiskReq *r, uint8_t *p, int len, bool change) 1596 { 1597 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1598 1599 while (len > 0) { 1600 int page, subpage, page_len; 1601 1602 /* Parse both possible formats for the mode page headers. */ 1603 page = p[0] & 0x3f; 1604 if (p[0] & 0x40) { 1605 if (len < 4) { 1606 goto invalid_param_len; 1607 } 1608 subpage = p[1]; 1609 page_len = lduw_be_p(&p[2]); 1610 p += 4; 1611 len -= 4; 1612 } else { 1613 if (len < 2) { 1614 goto invalid_param_len; 1615 } 1616 subpage = 0; 1617 page_len = p[1]; 1618 p += 2; 1619 len -= 2; 1620 } 1621 1622 if (subpage) { 1623 goto invalid_param; 1624 } 1625 if (page_len > len) { 1626 if (!(s->quirks & SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED)) { 1627 goto invalid_param_len; 1628 } 1629 trace_scsi_disk_mode_select_page_truncated(page, page_len, len); 1630 } 1631 1632 if (!change) { 1633 if (scsi_disk_check_mode_select(s, page, p, page_len) < 0) { 1634 goto invalid_param; 1635 } 1636 } else { 1637 scsi_disk_apply_mode_select(s, page, p); 1638 } 1639 1640 p += page_len; 1641 len -= page_len; 1642 } 1643 return 0; 1644 1645 invalid_param: 1646 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM)); 1647 return -1; 1648 1649 invalid_param_len: 1650 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); 1651 return -1; 1652 } 1653 1654 static void scsi_disk_emulate_mode_select(SCSIDiskReq *r, uint8_t *inbuf) 1655 { 1656 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1657 uint8_t *p = inbuf; 1658 int cmd = r->req.cmd.buf[0]; 1659 int len = r->req.cmd.xfer; 1660 int hdr_len = (cmd == MODE_SELECT ? 4 : 8); 1661 int bd_len, bs; 1662 int pass; 1663 1664 if ((r->req.cmd.buf[1] & 0x11) != 0x10) { 1665 if (!(s->quirks & 1666 (1 << SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE))) { 1667 /* We only support PF=1, SP=0. */ 1668 goto invalid_field; 1669 } 1670 } 1671 1672 if (len < hdr_len) { 1673 goto invalid_param_len; 1674 } 1675 1676 bd_len = (cmd == MODE_SELECT ? p[3] : lduw_be_p(&p[6])); 1677 len -= hdr_len; 1678 p += hdr_len; 1679 if (len < bd_len) { 1680 goto invalid_param_len; 1681 } 1682 if (bd_len != 0 && bd_len != 8) { 1683 goto invalid_param; 1684 } 1685 1686 /* Allow changing the block size */ 1687 if (bd_len) { 1688 bs = p[5] << 16 | p[6] << 8 | p[7]; 1689 1690 /* 1691 * Since the existing code only checks/updates bits 8-15 of the block 1692 * size, restrict ourselves to the same requirement for now to ensure 1693 * that a block size set by a block descriptor and then read back by 1694 * a subsequent SCSI command will be the same. Also disallow a block 1695 * size of 256 since we cannot handle anything below BDRV_SECTOR_SIZE. 1696 */ 1697 if (bs && !(bs & ~0xfe00) && bs != s->qdev.blocksize) { 1698 s->qdev.blocksize = bs; 1699 trace_scsi_disk_mode_select_set_blocksize(s->qdev.blocksize); 1700 } 1701 } 1702 1703 len -= bd_len; 1704 p += bd_len; 1705 1706 /* Ensure no change is made if there is an error! */ 1707 for (pass = 0; pass < 2; pass++) { 1708 if (mode_select_pages(r, p, len, pass == 1) < 0) { 1709 assert(pass == 0); 1710 return; 1711 } 1712 } 1713 if (!blk_enable_write_cache(s->qdev.conf.blk)) { 1714 /* The request is used as the AIO opaque value, so add a ref. */ 1715 scsi_req_ref(&r->req); 1716 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, 1717 BLOCK_ACCT_FLUSH); 1718 r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); 1719 return; 1720 } 1721 1722 scsi_req_complete(&r->req, GOOD); 1723 return; 1724 1725 invalid_param: 1726 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM)); 1727 return; 1728 1729 invalid_param_len: 1730 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); 1731 return; 1732 1733 invalid_field: 1734 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 1735 } 1736 1737 /* sector_num and nb_sectors expected to be in qdev blocksize */ 1738 static inline bool check_lba_range(SCSIDiskState *s, 1739 uint64_t sector_num, uint32_t nb_sectors) 1740 { 1741 /* 1742 * The first line tests that no overflow happens when computing the last 1743 * sector. The second line tests that the last accessed sector is in 1744 * range. 1745 * 1746 * Careful, the computations should not underflow for nb_sectors == 0, 1747 * and a 0-block read to the first LBA beyond the end of device is 1748 * valid. 1749 */ 1750 return (sector_num <= sector_num + nb_sectors && 1751 sector_num + nb_sectors <= s->qdev.max_lba + 1); 1752 } 1753 1754 typedef struct UnmapCBData { 1755 SCSIDiskReq *r; 1756 uint8_t *inbuf; 1757 int count; 1758 } UnmapCBData; 1759 1760 static void scsi_unmap_complete(void *opaque, int ret); 1761 1762 static void scsi_unmap_complete_noio(UnmapCBData *data, int ret) 1763 { 1764 SCSIDiskReq *r = data->r; 1765 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1766 1767 assert(r->req.aiocb == NULL); 1768 1769 if (data->count > 0) { 1770 uint64_t sector_num = ldq_be_p(&data->inbuf[0]); 1771 uint32_t nb_sectors = ldl_be_p(&data->inbuf[8]) & 0xffffffffULL; 1772 r->sector = sector_num * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 1773 r->sector_count = nb_sectors * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 1774 1775 if (!check_lba_range(s, sector_num, nb_sectors)) { 1776 block_acct_invalid(blk_get_stats(s->qdev.conf.blk), 1777 BLOCK_ACCT_UNMAP); 1778 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); 1779 goto done; 1780 } 1781 1782 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 1783 r->sector_count * BDRV_SECTOR_SIZE, 1784 BLOCK_ACCT_UNMAP); 1785 1786 r->req.aiocb = blk_aio_pdiscard(s->qdev.conf.blk, 1787 r->sector * BDRV_SECTOR_SIZE, 1788 r->sector_count * BDRV_SECTOR_SIZE, 1789 scsi_unmap_complete, data); 1790 data->count--; 1791 data->inbuf += 16; 1792 return; 1793 } 1794 1795 scsi_req_complete(&r->req, GOOD); 1796 1797 done: 1798 scsi_req_unref(&r->req); 1799 g_free(data); 1800 } 1801 1802 static void scsi_unmap_complete(void *opaque, int ret) 1803 { 1804 UnmapCBData *data = opaque; 1805 SCSIDiskReq *r = data->r; 1806 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1807 1808 assert(r->req.aiocb != NULL); 1809 r->req.aiocb = NULL; 1810 1811 if (scsi_disk_req_check_error(r, ret, true)) { 1812 scsi_req_unref(&r->req); 1813 g_free(data); 1814 } else { 1815 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 1816 scsi_unmap_complete_noio(data, ret); 1817 } 1818 } 1819 1820 static void scsi_disk_emulate_unmap(SCSIDiskReq *r, uint8_t *inbuf) 1821 { 1822 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1823 uint8_t *p = inbuf; 1824 int len = r->req.cmd.xfer; 1825 UnmapCBData *data; 1826 1827 /* Reject ANCHOR=1. */ 1828 if (r->req.cmd.buf[1] & 0x1) { 1829 goto invalid_field; 1830 } 1831 1832 if (len < 8) { 1833 goto invalid_param_len; 1834 } 1835 if (len < lduw_be_p(&p[0]) + 2) { 1836 goto invalid_param_len; 1837 } 1838 if (len < lduw_be_p(&p[2]) + 8) { 1839 goto invalid_param_len; 1840 } 1841 if (lduw_be_p(&p[2]) & 15) { 1842 goto invalid_param_len; 1843 } 1844 1845 if (!blk_is_writable(s->qdev.conf.blk)) { 1846 block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); 1847 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); 1848 return; 1849 } 1850 1851 data = g_new0(UnmapCBData, 1); 1852 data->r = r; 1853 data->inbuf = &p[8]; 1854 data->count = lduw_be_p(&p[2]) >> 4; 1855 1856 /* The matching unref is in scsi_unmap_complete, before data is freed. */ 1857 scsi_req_ref(&r->req); 1858 scsi_unmap_complete_noio(data, 0); 1859 return; 1860 1861 invalid_param_len: 1862 block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); 1863 scsi_check_condition(r, SENSE_CODE(INVALID_PARAM_LEN)); 1864 return; 1865 1866 invalid_field: 1867 block_acct_invalid(blk_get_stats(s->qdev.conf.blk), BLOCK_ACCT_UNMAP); 1868 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 1869 } 1870 1871 typedef struct WriteSameCBData { 1872 SCSIDiskReq *r; 1873 int64_t sector; 1874 int nb_sectors; 1875 QEMUIOVector qiov; 1876 struct iovec iov; 1877 } WriteSameCBData; 1878 1879 static void scsi_write_same_complete(void *opaque, int ret) 1880 { 1881 WriteSameCBData *data = opaque; 1882 SCSIDiskReq *r = data->r; 1883 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 1884 1885 assert(r->req.aiocb != NULL); 1886 r->req.aiocb = NULL; 1887 1888 if (scsi_disk_req_check_error(r, ret, true)) { 1889 goto done; 1890 } 1891 1892 block_acct_done(blk_get_stats(s->qdev.conf.blk), &r->acct); 1893 1894 data->nb_sectors -= data->iov.iov_len / BDRV_SECTOR_SIZE; 1895 data->sector += data->iov.iov_len / BDRV_SECTOR_SIZE; 1896 data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE, 1897 data->iov.iov_len); 1898 if (data->iov.iov_len) { 1899 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 1900 data->iov.iov_len, BLOCK_ACCT_WRITE); 1901 /* Reinitialize qiov, to handle unaligned WRITE SAME request 1902 * where final qiov may need smaller size */ 1903 qemu_iovec_init_external(&data->qiov, &data->iov, 1); 1904 r->req.aiocb = blk_aio_pwritev(s->qdev.conf.blk, 1905 data->sector << BDRV_SECTOR_BITS, 1906 &data->qiov, 0, 1907 scsi_write_same_complete, data); 1908 return; 1909 } 1910 1911 scsi_req_complete(&r->req, GOOD); 1912 1913 done: 1914 scsi_req_unref(&r->req); 1915 qemu_vfree(data->iov.iov_base); 1916 g_free(data); 1917 } 1918 1919 static void scsi_disk_emulate_write_same(SCSIDiskReq *r, uint8_t *inbuf) 1920 { 1921 SCSIRequest *req = &r->req; 1922 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 1923 uint32_t nb_sectors = scsi_data_cdb_xfer(r->req.cmd.buf); 1924 WriteSameCBData *data; 1925 uint8_t *buf; 1926 int i, l; 1927 1928 /* Fail if PBDATA=1 or LBDATA=1 or ANCHOR=1. */ 1929 if (nb_sectors == 0 || (req->cmd.buf[1] & 0x16)) { 1930 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 1931 return; 1932 } 1933 1934 if (!blk_is_writable(s->qdev.conf.blk)) { 1935 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); 1936 return; 1937 } 1938 if (!check_lba_range(s, r->req.cmd.lba, nb_sectors)) { 1939 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); 1940 return; 1941 } 1942 1943 if ((req->cmd.buf[1] & 0x1) || buffer_is_zero(inbuf, s->qdev.blocksize)) { 1944 int flags = (req->cmd.buf[1] & 0x8) ? BDRV_REQ_MAY_UNMAP : 0; 1945 1946 /* The request is used as the AIO opaque value, so add a ref. */ 1947 scsi_req_ref(&r->req); 1948 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 1949 nb_sectors * s->qdev.blocksize, 1950 BLOCK_ACCT_WRITE); 1951 r->req.aiocb = blk_aio_pwrite_zeroes(s->qdev.conf.blk, 1952 r->req.cmd.lba * s->qdev.blocksize, 1953 nb_sectors * s->qdev.blocksize, 1954 flags, scsi_aio_complete, r); 1955 return; 1956 } 1957 1958 data = g_new0(WriteSameCBData, 1); 1959 data->r = r; 1960 data->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 1961 data->nb_sectors = nb_sectors * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 1962 data->iov.iov_len = MIN(data->nb_sectors * BDRV_SECTOR_SIZE, 1963 SCSI_WRITE_SAME_MAX); 1964 data->iov.iov_base = buf = blk_blockalign(s->qdev.conf.blk, 1965 data->iov.iov_len); 1966 qemu_iovec_init_external(&data->qiov, &data->iov, 1); 1967 1968 for (i = 0; i < data->iov.iov_len; i += l) { 1969 l = MIN(s->qdev.blocksize, data->iov.iov_len - i); 1970 memcpy(&buf[i], inbuf, l); 1971 } 1972 1973 scsi_req_ref(&r->req); 1974 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 1975 data->iov.iov_len, BLOCK_ACCT_WRITE); 1976 r->req.aiocb = blk_aio_pwritev(s->qdev.conf.blk, 1977 data->sector << BDRV_SECTOR_BITS, 1978 &data->qiov, 0, 1979 scsi_write_same_complete, data); 1980 } 1981 1982 static void scsi_disk_emulate_write_data(SCSIRequest *req) 1983 { 1984 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 1985 1986 if (r->iov.iov_len) { 1987 int buflen = r->iov.iov_len; 1988 trace_scsi_disk_emulate_write_data(buflen); 1989 r->iov.iov_len = 0; 1990 scsi_req_data(&r->req, buflen); 1991 return; 1992 } 1993 1994 switch (req->cmd.buf[0]) { 1995 case MODE_SELECT: 1996 case MODE_SELECT_10: 1997 /* This also clears the sense buffer for REQUEST SENSE. */ 1998 scsi_disk_emulate_mode_select(r, r->iov.iov_base); 1999 break; 2000 2001 case UNMAP: 2002 scsi_disk_emulate_unmap(r, r->iov.iov_base); 2003 break; 2004 2005 case VERIFY_10: 2006 case VERIFY_12: 2007 case VERIFY_16: 2008 if (r->req.status == -1) { 2009 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 2010 } 2011 break; 2012 2013 case WRITE_SAME_10: 2014 case WRITE_SAME_16: 2015 scsi_disk_emulate_write_same(r, r->iov.iov_base); 2016 break; 2017 2018 case FORMAT_UNIT: 2019 scsi_req_complete(&r->req, GOOD); 2020 break; 2021 2022 default: 2023 abort(); 2024 } 2025 } 2026 2027 static int32_t scsi_disk_emulate_command(SCSIRequest *req, uint8_t *buf) 2028 { 2029 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 2030 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 2031 uint64_t nb_sectors; 2032 uint8_t *outbuf; 2033 int buflen; 2034 2035 switch (req->cmd.buf[0]) { 2036 case INQUIRY: 2037 case MODE_SENSE: 2038 case MODE_SENSE_10: 2039 case RESERVE: 2040 case RESERVE_10: 2041 case RELEASE: 2042 case RELEASE_10: 2043 case START_STOP: 2044 case ALLOW_MEDIUM_REMOVAL: 2045 case GET_CONFIGURATION: 2046 case GET_EVENT_STATUS_NOTIFICATION: 2047 case MECHANISM_STATUS: 2048 case REQUEST_SENSE: 2049 break; 2050 2051 default: 2052 if (!blk_is_available(s->qdev.conf.blk)) { 2053 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); 2054 return 0; 2055 } 2056 break; 2057 } 2058 2059 /* 2060 * FIXME: we shouldn't return anything bigger than 4k, but the code 2061 * requires the buffer to be as big as req->cmd.xfer in several 2062 * places. So, do not allow CDBs with a very large ALLOCATION 2063 * LENGTH. The real fix would be to modify scsi_read_data and 2064 * dma_buf_read, so that they return data beyond the buflen 2065 * as all zeros. 2066 */ 2067 if (req->cmd.xfer > 65536) { 2068 goto illegal_request; 2069 } 2070 r->buflen = MAX(4096, req->cmd.xfer); 2071 2072 if (!r->iov.iov_base) { 2073 r->iov.iov_base = blk_blockalign(s->qdev.conf.blk, r->buflen); 2074 } 2075 2076 outbuf = r->iov.iov_base; 2077 memset(outbuf, 0, r->buflen); 2078 switch (req->cmd.buf[0]) { 2079 case TEST_UNIT_READY: 2080 assert(blk_is_available(s->qdev.conf.blk)); 2081 break; 2082 case INQUIRY: 2083 buflen = scsi_disk_emulate_inquiry(req, outbuf); 2084 if (buflen < 0) { 2085 goto illegal_request; 2086 } 2087 break; 2088 case MODE_SENSE: 2089 case MODE_SENSE_10: 2090 buflen = scsi_disk_emulate_mode_sense(r, outbuf); 2091 if (buflen < 0) { 2092 goto illegal_request; 2093 } 2094 break; 2095 case READ_TOC: 2096 buflen = scsi_disk_emulate_read_toc(req, outbuf); 2097 if (buflen < 0) { 2098 goto illegal_request; 2099 } 2100 break; 2101 case RESERVE: 2102 if (req->cmd.buf[1] & 1) { 2103 goto illegal_request; 2104 } 2105 break; 2106 case RESERVE_10: 2107 if (req->cmd.buf[1] & 3) { 2108 goto illegal_request; 2109 } 2110 break; 2111 case RELEASE: 2112 if (req->cmd.buf[1] & 1) { 2113 goto illegal_request; 2114 } 2115 break; 2116 case RELEASE_10: 2117 if (req->cmd.buf[1] & 3) { 2118 goto illegal_request; 2119 } 2120 break; 2121 case START_STOP: 2122 if (scsi_disk_emulate_start_stop(r) < 0) { 2123 return 0; 2124 } 2125 break; 2126 case ALLOW_MEDIUM_REMOVAL: 2127 s->tray_locked = req->cmd.buf[4] & 1; 2128 blk_lock_medium(s->qdev.conf.blk, req->cmd.buf[4] & 1); 2129 break; 2130 case READ_CAPACITY_10: 2131 /* The normal LEN field for this command is zero. */ 2132 memset(outbuf, 0, 8); 2133 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 2134 if (!nb_sectors) { 2135 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY)); 2136 return 0; 2137 } 2138 if ((req->cmd.buf[8] & 1) == 0 && req->cmd.lba) { 2139 goto illegal_request; 2140 } 2141 nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; 2142 /* Returned value is the address of the last sector. */ 2143 nb_sectors--; 2144 /* Remember the new size for read/write sanity checking. */ 2145 s->qdev.max_lba = nb_sectors; 2146 /* Clip to 2TB, instead of returning capacity modulo 2TB. */ 2147 if (nb_sectors > UINT32_MAX) { 2148 nb_sectors = UINT32_MAX; 2149 } 2150 outbuf[0] = (nb_sectors >> 24) & 0xff; 2151 outbuf[1] = (nb_sectors >> 16) & 0xff; 2152 outbuf[2] = (nb_sectors >> 8) & 0xff; 2153 outbuf[3] = nb_sectors & 0xff; 2154 outbuf[4] = 0; 2155 outbuf[5] = 0; 2156 outbuf[6] = s->qdev.blocksize >> 8; 2157 outbuf[7] = 0; 2158 break; 2159 case REQUEST_SENSE: 2160 /* Just return "NO SENSE". */ 2161 buflen = scsi_convert_sense(NULL, 0, outbuf, r->buflen, 2162 (req->cmd.buf[1] & 1) == 0); 2163 if (buflen < 0) { 2164 goto illegal_request; 2165 } 2166 break; 2167 case MECHANISM_STATUS: 2168 buflen = scsi_emulate_mechanism_status(s, outbuf); 2169 if (buflen < 0) { 2170 goto illegal_request; 2171 } 2172 break; 2173 case GET_CONFIGURATION: 2174 buflen = scsi_get_configuration(s, outbuf); 2175 if (buflen < 0) { 2176 goto illegal_request; 2177 } 2178 break; 2179 case GET_EVENT_STATUS_NOTIFICATION: 2180 buflen = scsi_get_event_status_notification(s, r, outbuf); 2181 if (buflen < 0) { 2182 goto illegal_request; 2183 } 2184 break; 2185 case READ_DISC_INFORMATION: 2186 buflen = scsi_read_disc_information(s, r, outbuf); 2187 if (buflen < 0) { 2188 goto illegal_request; 2189 } 2190 break; 2191 case READ_DVD_STRUCTURE: 2192 buflen = scsi_read_dvd_structure(s, r, outbuf); 2193 if (buflen < 0) { 2194 goto illegal_request; 2195 } 2196 break; 2197 case SERVICE_ACTION_IN_16: 2198 /* Service Action In subcommands. */ 2199 if ((req->cmd.buf[1] & 31) == SAI_READ_CAPACITY_16) { 2200 trace_scsi_disk_emulate_command_SAI_16(); 2201 memset(outbuf, 0, req->cmd.xfer); 2202 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 2203 if (!nb_sectors) { 2204 scsi_check_condition(r, SENSE_CODE(LUN_NOT_READY)); 2205 return 0; 2206 } 2207 if ((req->cmd.buf[14] & 1) == 0 && req->cmd.lba) { 2208 goto illegal_request; 2209 } 2210 nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; 2211 /* Returned value is the address of the last sector. */ 2212 nb_sectors--; 2213 /* Remember the new size for read/write sanity checking. */ 2214 s->qdev.max_lba = nb_sectors; 2215 outbuf[0] = (nb_sectors >> 56) & 0xff; 2216 outbuf[1] = (nb_sectors >> 48) & 0xff; 2217 outbuf[2] = (nb_sectors >> 40) & 0xff; 2218 outbuf[3] = (nb_sectors >> 32) & 0xff; 2219 outbuf[4] = (nb_sectors >> 24) & 0xff; 2220 outbuf[5] = (nb_sectors >> 16) & 0xff; 2221 outbuf[6] = (nb_sectors >> 8) & 0xff; 2222 outbuf[7] = nb_sectors & 0xff; 2223 outbuf[8] = 0; 2224 outbuf[9] = 0; 2225 outbuf[10] = s->qdev.blocksize >> 8; 2226 outbuf[11] = 0; 2227 outbuf[12] = 0; 2228 outbuf[13] = get_physical_block_exp(&s->qdev.conf); 2229 2230 /* set TPE bit if the format supports discard */ 2231 if (s->qdev.conf.discard_granularity) { 2232 outbuf[14] = 0x80; 2233 } 2234 2235 /* Protection, exponent and lowest lba field left blank. */ 2236 break; 2237 } 2238 trace_scsi_disk_emulate_command_SAI_unsupported(); 2239 goto illegal_request; 2240 case SYNCHRONIZE_CACHE: 2241 /* The request is used as the AIO opaque value, so add a ref. */ 2242 scsi_req_ref(&r->req); 2243 block_acct_start(blk_get_stats(s->qdev.conf.blk), &r->acct, 0, 2244 BLOCK_ACCT_FLUSH); 2245 r->req.aiocb = blk_aio_flush(s->qdev.conf.blk, scsi_aio_complete, r); 2246 return 0; 2247 case SEEK_10: 2248 trace_scsi_disk_emulate_command_SEEK_10(r->req.cmd.lba); 2249 if (r->req.cmd.lba > s->qdev.max_lba) { 2250 goto illegal_lba; 2251 } 2252 break; 2253 case MODE_SELECT: 2254 trace_scsi_disk_emulate_command_MODE_SELECT(r->req.cmd.xfer); 2255 break; 2256 case MODE_SELECT_10: 2257 trace_scsi_disk_emulate_command_MODE_SELECT_10(r->req.cmd.xfer); 2258 break; 2259 case UNMAP: 2260 trace_scsi_disk_emulate_command_UNMAP(r->req.cmd.xfer); 2261 break; 2262 case VERIFY_10: 2263 case VERIFY_12: 2264 case VERIFY_16: 2265 trace_scsi_disk_emulate_command_VERIFY((req->cmd.buf[1] >> 1) & 3); 2266 if (req->cmd.buf[1] & 6) { 2267 goto illegal_request; 2268 } 2269 break; 2270 case WRITE_SAME_10: 2271 case WRITE_SAME_16: 2272 trace_scsi_disk_emulate_command_WRITE_SAME( 2273 req->cmd.buf[0] == WRITE_SAME_10 ? 10 : 16, r->req.cmd.xfer); 2274 break; 2275 case FORMAT_UNIT: 2276 trace_scsi_disk_emulate_command_FORMAT_UNIT(r->req.cmd.xfer); 2277 break; 2278 default: 2279 trace_scsi_disk_emulate_command_UNKNOWN(buf[0], 2280 scsi_command_name(buf[0])); 2281 scsi_check_condition(r, SENSE_CODE(INVALID_OPCODE)); 2282 return 0; 2283 } 2284 assert(!r->req.aiocb); 2285 r->iov.iov_len = MIN(r->buflen, req->cmd.xfer); 2286 if (r->iov.iov_len == 0) { 2287 scsi_req_complete(&r->req, GOOD); 2288 } 2289 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 2290 assert(r->iov.iov_len == req->cmd.xfer); 2291 return -r->iov.iov_len; 2292 } else { 2293 return r->iov.iov_len; 2294 } 2295 2296 illegal_request: 2297 if (r->req.status == -1) { 2298 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 2299 } 2300 return 0; 2301 2302 illegal_lba: 2303 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); 2304 return 0; 2305 } 2306 2307 /* Execute a scsi command. Returns the length of the data expected by the 2308 command. This will be Positive for data transfers from the device 2309 (eg. disk reads), negative for transfers to the device (eg. disk writes), 2310 and zero if the command does not transfer any data. */ 2311 2312 static int32_t scsi_disk_dma_command(SCSIRequest *req, uint8_t *buf) 2313 { 2314 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 2315 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 2316 SCSIDiskClass *sdc = (SCSIDiskClass *) object_get_class(OBJECT(s)); 2317 uint32_t len; 2318 uint8_t command; 2319 2320 command = buf[0]; 2321 2322 if (!blk_is_available(s->qdev.conf.blk)) { 2323 scsi_check_condition(r, SENSE_CODE(NO_MEDIUM)); 2324 return 0; 2325 } 2326 2327 len = scsi_data_cdb_xfer(r->req.cmd.buf); 2328 switch (command) { 2329 case READ_6: 2330 case READ_10: 2331 case READ_12: 2332 case READ_16: 2333 trace_scsi_disk_dma_command_READ(r->req.cmd.lba, len); 2334 /* Protection information is not supported. For SCSI versions 2 and 2335 * older (as determined by snooping the guest's INQUIRY commands), 2336 * there is no RD/WR/VRPROTECT, so skip this check in these versions. 2337 */ 2338 if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { 2339 goto illegal_request; 2340 } 2341 if (!check_lba_range(s, r->req.cmd.lba, len)) { 2342 goto illegal_lba; 2343 } 2344 r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 2345 r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 2346 break; 2347 case WRITE_6: 2348 case WRITE_10: 2349 case WRITE_12: 2350 case WRITE_16: 2351 case WRITE_VERIFY_10: 2352 case WRITE_VERIFY_12: 2353 case WRITE_VERIFY_16: 2354 if (!blk_is_writable(s->qdev.conf.blk)) { 2355 scsi_check_condition(r, SENSE_CODE(WRITE_PROTECTED)); 2356 return 0; 2357 } 2358 trace_scsi_disk_dma_command_WRITE( 2359 (command & 0xe) == 0xe ? "And Verify " : "", 2360 r->req.cmd.lba, len); 2361 /* fall through */ 2362 case VERIFY_10: 2363 case VERIFY_12: 2364 case VERIFY_16: 2365 /* We get here only for BYTCHK == 0x01 and only for scsi-block. 2366 * As far as DMA is concerned, we can treat it the same as a write; 2367 * scsi_block_do_sgio will send VERIFY commands. 2368 */ 2369 if (s->qdev.scsi_version > 2 && (r->req.cmd.buf[1] & 0xe0)) { 2370 goto illegal_request; 2371 } 2372 if (!check_lba_range(s, r->req.cmd.lba, len)) { 2373 goto illegal_lba; 2374 } 2375 r->sector = r->req.cmd.lba * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 2376 r->sector_count = len * (s->qdev.blocksize / BDRV_SECTOR_SIZE); 2377 break; 2378 default: 2379 abort(); 2380 illegal_request: 2381 scsi_check_condition(r, SENSE_CODE(INVALID_FIELD)); 2382 return 0; 2383 illegal_lba: 2384 scsi_check_condition(r, SENSE_CODE(LBA_OUT_OF_RANGE)); 2385 return 0; 2386 } 2387 r->need_fua_emulation = sdc->need_fua_emulation(&r->req.cmd); 2388 if (r->sector_count == 0) { 2389 scsi_req_complete(&r->req, GOOD); 2390 } 2391 assert(r->iov.iov_len == 0); 2392 if (r->req.cmd.mode == SCSI_XFER_TO_DEV) { 2393 return -r->sector_count * BDRV_SECTOR_SIZE; 2394 } else { 2395 return r->sector_count * BDRV_SECTOR_SIZE; 2396 } 2397 } 2398 2399 static void scsi_disk_reset(DeviceState *dev) 2400 { 2401 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev.qdev, dev); 2402 uint64_t nb_sectors; 2403 2404 scsi_device_purge_requests(&s->qdev, SENSE_CODE(RESET)); 2405 2406 blk_get_geometry(s->qdev.conf.blk, &nb_sectors); 2407 2408 nb_sectors /= s->qdev.blocksize / BDRV_SECTOR_SIZE; 2409 if (nb_sectors) { 2410 nb_sectors--; 2411 } 2412 s->qdev.max_lba = nb_sectors; 2413 /* reset tray statuses */ 2414 s->tray_locked = 0; 2415 s->tray_open = 0; 2416 2417 s->qdev.scsi_version = s->qdev.default_scsi_version; 2418 } 2419 2420 static void scsi_disk_drained_begin(void *opaque) 2421 { 2422 SCSIDiskState *s = opaque; 2423 2424 scsi_device_drained_begin(&s->qdev); 2425 } 2426 2427 static void scsi_disk_drained_end(void *opaque) 2428 { 2429 SCSIDiskState *s = opaque; 2430 2431 scsi_device_drained_end(&s->qdev); 2432 } 2433 2434 static void scsi_disk_resize_cb(void *opaque) 2435 { 2436 SCSIDiskState *s = opaque; 2437 2438 /* SPC lists this sense code as available only for 2439 * direct-access devices. 2440 */ 2441 if (s->qdev.type == TYPE_DISK) { 2442 scsi_device_report_change(&s->qdev, SENSE_CODE(CAPACITY_CHANGED)); 2443 } 2444 } 2445 2446 static void scsi_cd_change_media_cb(void *opaque, bool load, Error **errp) 2447 { 2448 SCSIDiskState *s = opaque; 2449 2450 /* 2451 * When a CD gets changed, we have to report an ejected state and 2452 * then a loaded state to guests so that they detect tray 2453 * open/close and media change events. Guests that do not use 2454 * GET_EVENT_STATUS_NOTIFICATION to detect such tray open/close 2455 * states rely on this behavior. 2456 * 2457 * media_changed governs the state machine used for unit attention 2458 * report. media_event is used by GET EVENT STATUS NOTIFICATION. 2459 */ 2460 s->media_changed = load; 2461 s->tray_open = !load; 2462 scsi_device_set_ua(&s->qdev, SENSE_CODE(UNIT_ATTENTION_NO_MEDIUM)); 2463 s->media_event = true; 2464 s->eject_request = false; 2465 } 2466 2467 static void scsi_cd_eject_request_cb(void *opaque, bool force) 2468 { 2469 SCSIDiskState *s = opaque; 2470 2471 s->eject_request = true; 2472 if (force) { 2473 s->tray_locked = false; 2474 } 2475 } 2476 2477 static bool scsi_cd_is_tray_open(void *opaque) 2478 { 2479 return ((SCSIDiskState *)opaque)->tray_open; 2480 } 2481 2482 static bool scsi_cd_is_medium_locked(void *opaque) 2483 { 2484 return ((SCSIDiskState *)opaque)->tray_locked; 2485 } 2486 2487 static const BlockDevOps scsi_disk_removable_block_ops = { 2488 .change_media_cb = scsi_cd_change_media_cb, 2489 .drained_begin = scsi_disk_drained_begin, 2490 .drained_end = scsi_disk_drained_end, 2491 .eject_request_cb = scsi_cd_eject_request_cb, 2492 .is_medium_locked = scsi_cd_is_medium_locked, 2493 .is_tray_open = scsi_cd_is_tray_open, 2494 .resize_cb = scsi_disk_resize_cb, 2495 }; 2496 2497 static const BlockDevOps scsi_disk_block_ops = { 2498 .drained_begin = scsi_disk_drained_begin, 2499 .drained_end = scsi_disk_drained_end, 2500 .resize_cb = scsi_disk_resize_cb, 2501 }; 2502 2503 static void scsi_disk_unit_attention_reported(SCSIDevice *dev) 2504 { 2505 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); 2506 if (s->media_changed) { 2507 s->media_changed = false; 2508 scsi_device_set_ua(&s->qdev, SENSE_CODE(MEDIUM_CHANGED)); 2509 } 2510 } 2511 2512 static void scsi_realize(SCSIDevice *dev, Error **errp) 2513 { 2514 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); 2515 bool read_only; 2516 2517 if (!s->qdev.conf.blk) { 2518 error_setg(errp, "drive property not set"); 2519 return; 2520 } 2521 2522 if (!(s->features & (1 << SCSI_DISK_F_REMOVABLE)) && 2523 !blk_is_inserted(s->qdev.conf.blk)) { 2524 error_setg(errp, "Device needs media, but drive is empty"); 2525 return; 2526 } 2527 2528 if (!blkconf_blocksizes(&s->qdev.conf, errp)) { 2529 return; 2530 } 2531 2532 if (blk_get_aio_context(s->qdev.conf.blk) != qemu_get_aio_context() && 2533 !s->qdev.hba_supports_iothread) 2534 { 2535 error_setg(errp, "HBA does not support iothreads"); 2536 return; 2537 } 2538 2539 if (dev->type == TYPE_DISK) { 2540 if (!blkconf_geometry(&dev->conf, NULL, 65535, 255, 255, errp)) { 2541 return; 2542 } 2543 } 2544 2545 read_only = !blk_supports_write_perm(s->qdev.conf.blk); 2546 if (dev->type == TYPE_ROM) { 2547 read_only = true; 2548 } 2549 2550 if (!blkconf_apply_backend_options(&dev->conf, read_only, 2551 dev->type == TYPE_DISK, errp)) { 2552 return; 2553 } 2554 2555 if (s->qdev.conf.discard_granularity == -1) { 2556 s->qdev.conf.discard_granularity = 2557 MAX(s->qdev.conf.logical_block_size, DEFAULT_DISCARD_GRANULARITY); 2558 } 2559 2560 if (!s->version) { 2561 s->version = g_strdup(qemu_hw_version()); 2562 } 2563 if (!s->vendor) { 2564 s->vendor = g_strdup("QEMU"); 2565 } 2566 if (s->serial && strlen(s->serial) > MAX_SERIAL_LEN) { 2567 error_setg(errp, "The serial number can't be longer than %d characters", 2568 MAX_SERIAL_LEN); 2569 return; 2570 } 2571 if (!s->device_id) { 2572 if (s->serial) { 2573 if (strlen(s->serial) > MAX_SERIAL_LEN_FOR_DEVID) { 2574 error_setg(errp, "The serial number can't be longer than %d " 2575 "characters when it is also used as the default for " 2576 "device_id", MAX_SERIAL_LEN_FOR_DEVID); 2577 return; 2578 } 2579 s->device_id = g_strdup(s->serial); 2580 } else { 2581 const char *str = blk_name(s->qdev.conf.blk); 2582 if (str && *str) { 2583 s->device_id = g_strdup(str); 2584 } 2585 } 2586 } 2587 2588 if (blk_is_sg(s->qdev.conf.blk)) { 2589 error_setg(errp, "unwanted /dev/sg*"); 2590 return; 2591 } 2592 2593 if ((s->features & (1 << SCSI_DISK_F_REMOVABLE)) && 2594 !(s->features & (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS))) { 2595 blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_removable_block_ops, s); 2596 } else { 2597 blk_set_dev_ops(s->qdev.conf.blk, &scsi_disk_block_ops, s); 2598 } 2599 2600 blk_iostatus_enable(s->qdev.conf.blk); 2601 2602 add_boot_device_lchs(&dev->qdev, NULL, 2603 dev->conf.lcyls, 2604 dev->conf.lheads, 2605 dev->conf.lsecs); 2606 } 2607 2608 static void scsi_unrealize(SCSIDevice *dev) 2609 { 2610 del_boot_device_lchs(&dev->qdev, NULL); 2611 } 2612 2613 static void scsi_hd_realize(SCSIDevice *dev, Error **errp) 2614 { 2615 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); 2616 2617 /* can happen for devices without drive. The error message for missing 2618 * backend will be issued in scsi_realize 2619 */ 2620 if (s->qdev.conf.blk) { 2621 if (!blkconf_blocksizes(&s->qdev.conf, errp)) { 2622 return; 2623 } 2624 } 2625 s->qdev.blocksize = s->qdev.conf.logical_block_size; 2626 s->qdev.type = TYPE_DISK; 2627 if (!s->product) { 2628 s->product = g_strdup("QEMU HARDDISK"); 2629 } 2630 scsi_realize(&s->qdev, errp); 2631 } 2632 2633 static void scsi_cd_realize(SCSIDevice *dev, Error **errp) 2634 { 2635 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); 2636 int ret; 2637 uint32_t blocksize = 2048; 2638 2639 if (!dev->conf.blk) { 2640 /* Anonymous BlockBackend for an empty drive. As we put it into 2641 * dev->conf, qdev takes care of detaching on unplug. */ 2642 dev->conf.blk = blk_new(qemu_get_aio_context(), 0, BLK_PERM_ALL); 2643 ret = blk_attach_dev(dev->conf.blk, &dev->qdev); 2644 assert(ret == 0); 2645 } 2646 2647 if (dev->conf.physical_block_size != 0) { 2648 blocksize = dev->conf.physical_block_size; 2649 } 2650 2651 s->qdev.blocksize = blocksize; 2652 s->qdev.type = TYPE_ROM; 2653 s->features |= 1 << SCSI_DISK_F_REMOVABLE; 2654 if (!s->product) { 2655 s->product = g_strdup("QEMU CD-ROM"); 2656 } 2657 scsi_realize(&s->qdev, errp); 2658 } 2659 2660 2661 static const SCSIReqOps scsi_disk_emulate_reqops = { 2662 .size = sizeof(SCSIDiskReq), 2663 .free_req = scsi_free_request, 2664 .send_command = scsi_disk_emulate_command, 2665 .read_data = scsi_disk_emulate_read_data, 2666 .write_data = scsi_disk_emulate_write_data, 2667 .get_buf = scsi_get_buf, 2668 .load_request = scsi_disk_emulate_load_request, 2669 .save_request = scsi_disk_emulate_save_request, 2670 }; 2671 2672 static const SCSIReqOps scsi_disk_dma_reqops = { 2673 .size = sizeof(SCSIDiskReq), 2674 .free_req = scsi_free_request, 2675 .send_command = scsi_disk_dma_command, 2676 .read_data = scsi_read_data, 2677 .write_data = scsi_write_data, 2678 .get_buf = scsi_get_buf, 2679 .load_request = scsi_disk_load_request, 2680 .save_request = scsi_disk_save_request, 2681 }; 2682 2683 static const SCSIReqOps *const scsi_disk_reqops_dispatch[256] = { 2684 [TEST_UNIT_READY] = &scsi_disk_emulate_reqops, 2685 [INQUIRY] = &scsi_disk_emulate_reqops, 2686 [MODE_SENSE] = &scsi_disk_emulate_reqops, 2687 [MODE_SENSE_10] = &scsi_disk_emulate_reqops, 2688 [START_STOP] = &scsi_disk_emulate_reqops, 2689 [ALLOW_MEDIUM_REMOVAL] = &scsi_disk_emulate_reqops, 2690 [READ_CAPACITY_10] = &scsi_disk_emulate_reqops, 2691 [READ_TOC] = &scsi_disk_emulate_reqops, 2692 [READ_DVD_STRUCTURE] = &scsi_disk_emulate_reqops, 2693 [READ_DISC_INFORMATION] = &scsi_disk_emulate_reqops, 2694 [GET_CONFIGURATION] = &scsi_disk_emulate_reqops, 2695 [GET_EVENT_STATUS_NOTIFICATION] = &scsi_disk_emulate_reqops, 2696 [MECHANISM_STATUS] = &scsi_disk_emulate_reqops, 2697 [SERVICE_ACTION_IN_16] = &scsi_disk_emulate_reqops, 2698 [REQUEST_SENSE] = &scsi_disk_emulate_reqops, 2699 [SYNCHRONIZE_CACHE] = &scsi_disk_emulate_reqops, 2700 [SEEK_10] = &scsi_disk_emulate_reqops, 2701 [MODE_SELECT] = &scsi_disk_emulate_reqops, 2702 [MODE_SELECT_10] = &scsi_disk_emulate_reqops, 2703 [UNMAP] = &scsi_disk_emulate_reqops, 2704 [WRITE_SAME_10] = &scsi_disk_emulate_reqops, 2705 [WRITE_SAME_16] = &scsi_disk_emulate_reqops, 2706 [VERIFY_10] = &scsi_disk_emulate_reqops, 2707 [VERIFY_12] = &scsi_disk_emulate_reqops, 2708 [VERIFY_16] = &scsi_disk_emulate_reqops, 2709 [FORMAT_UNIT] = &scsi_disk_emulate_reqops, 2710 2711 [READ_6] = &scsi_disk_dma_reqops, 2712 [READ_10] = &scsi_disk_dma_reqops, 2713 [READ_12] = &scsi_disk_dma_reqops, 2714 [READ_16] = &scsi_disk_dma_reqops, 2715 [WRITE_6] = &scsi_disk_dma_reqops, 2716 [WRITE_10] = &scsi_disk_dma_reqops, 2717 [WRITE_12] = &scsi_disk_dma_reqops, 2718 [WRITE_16] = &scsi_disk_dma_reqops, 2719 [WRITE_VERIFY_10] = &scsi_disk_dma_reqops, 2720 [WRITE_VERIFY_12] = &scsi_disk_dma_reqops, 2721 [WRITE_VERIFY_16] = &scsi_disk_dma_reqops, 2722 }; 2723 2724 static void scsi_disk_new_request_dump(uint32_t lun, uint32_t tag, uint8_t *buf) 2725 { 2726 int len = scsi_cdb_length(buf); 2727 g_autoptr(GString) str = NULL; 2728 2729 assert(len > 0 && len <= 16); 2730 str = qemu_hexdump_line(NULL, buf, len, 1, 0); 2731 trace_scsi_disk_new_request(lun, tag, str->str); 2732 } 2733 2734 static SCSIRequest *scsi_new_request(SCSIDevice *d, uint32_t tag, uint32_t lun, 2735 uint8_t *buf, void *hba_private) 2736 { 2737 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); 2738 SCSIRequest *req; 2739 const SCSIReqOps *ops; 2740 uint8_t command; 2741 2742 command = buf[0]; 2743 ops = scsi_disk_reqops_dispatch[command]; 2744 if (!ops) { 2745 ops = &scsi_disk_emulate_reqops; 2746 } 2747 req = scsi_req_alloc(ops, &s->qdev, tag, lun, hba_private); 2748 2749 if (trace_event_get_state_backends(TRACE_SCSI_DISK_NEW_REQUEST)) { 2750 scsi_disk_new_request_dump(lun, tag, buf); 2751 } 2752 2753 return req; 2754 } 2755 2756 #ifdef __linux__ 2757 static int get_device_type(SCSIDiskState *s) 2758 { 2759 uint8_t cmd[16]; 2760 uint8_t buf[36]; 2761 int ret; 2762 2763 memset(cmd, 0, sizeof(cmd)); 2764 memset(buf, 0, sizeof(buf)); 2765 cmd[0] = INQUIRY; 2766 cmd[4] = sizeof(buf); 2767 2768 ret = scsi_SG_IO_FROM_DEV(s->qdev.conf.blk, cmd, sizeof(cmd), 2769 buf, sizeof(buf), s->qdev.io_timeout); 2770 if (ret < 0) { 2771 return -1; 2772 } 2773 s->qdev.type = buf[0]; 2774 if (buf[1] & 0x80) { 2775 s->features |= 1 << SCSI_DISK_F_REMOVABLE; 2776 } 2777 return 0; 2778 } 2779 2780 static void scsi_block_realize(SCSIDevice *dev, Error **errp) 2781 { 2782 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev); 2783 int sg_version; 2784 int rc; 2785 2786 if (!s->qdev.conf.blk) { 2787 error_setg(errp, "drive property not set"); 2788 return; 2789 } 2790 2791 if (s->rotation_rate) { 2792 error_report_once("rotation_rate is specified for scsi-block but is " 2793 "not implemented. This option is deprecated and will " 2794 "be removed in a future version"); 2795 } 2796 2797 /* check we are using a driver managing SG_IO (version 3 and after) */ 2798 rc = blk_ioctl(s->qdev.conf.blk, SG_GET_VERSION_NUM, &sg_version); 2799 if (rc < 0) { 2800 error_setg_errno(errp, -rc, "cannot get SG_IO version number"); 2801 if (rc != -EPERM) { 2802 error_append_hint(errp, "Is this a SCSI device?\n"); 2803 } 2804 return; 2805 } 2806 if (sg_version < 30000) { 2807 error_setg(errp, "scsi generic interface too old"); 2808 return; 2809 } 2810 2811 /* get device type from INQUIRY data */ 2812 rc = get_device_type(s); 2813 if (rc < 0) { 2814 error_setg(errp, "INQUIRY failed"); 2815 return; 2816 } 2817 2818 /* Make a guess for the block size, we'll fix it when the guest sends. 2819 * READ CAPACITY. If they don't, they likely would assume these sizes 2820 * anyway. (TODO: check in /sys). 2821 */ 2822 if (s->qdev.type == TYPE_ROM || s->qdev.type == TYPE_WORM) { 2823 s->qdev.blocksize = 2048; 2824 } else { 2825 s->qdev.blocksize = 512; 2826 } 2827 2828 /* Makes the scsi-block device not removable by using HMP and QMP eject 2829 * command. 2830 */ 2831 s->features |= (1 << SCSI_DISK_F_NO_REMOVABLE_DEVOPS); 2832 2833 scsi_realize(&s->qdev, errp); 2834 scsi_generic_read_device_inquiry(&s->qdev); 2835 } 2836 2837 typedef struct SCSIBlockReq { 2838 SCSIDiskReq req; 2839 sg_io_hdr_t io_header; 2840 2841 /* Selected bytes of the original CDB, copied into our own CDB. */ 2842 uint8_t cmd, cdb1, group_number; 2843 2844 /* CDB passed to SG_IO. */ 2845 uint8_t cdb[16]; 2846 BlockCompletionFunc *cb; 2847 void *cb_opaque; 2848 } SCSIBlockReq; 2849 2850 static void scsi_block_sgio_complete(void *opaque, int ret) 2851 { 2852 SCSIBlockReq *req = (SCSIBlockReq *)opaque; 2853 SCSIDiskReq *r = &req->req; 2854 sg_io_hdr_t *io_hdr = &req->io_header; 2855 2856 if (ret == 0) { 2857 /* FIXME This skips calling req->cb() and any cleanup in it */ 2858 if (io_hdr->host_status != SCSI_HOST_OK) { 2859 scsi_req_complete_failed(&r->req, io_hdr->host_status); 2860 scsi_req_unref(&r->req); 2861 return; 2862 } 2863 2864 if (io_hdr->driver_status & SG_ERR_DRIVER_TIMEOUT) { 2865 ret = BUSY; 2866 } else { 2867 ret = io_hdr->status; 2868 } 2869 } 2870 2871 req->cb(req->cb_opaque, ret); 2872 } 2873 2874 static BlockAIOCB *scsi_block_do_sgio(SCSIBlockReq *req, 2875 int64_t offset, QEMUIOVector *iov, 2876 int direction, 2877 BlockCompletionFunc *cb, void *opaque) 2878 { 2879 sg_io_hdr_t *io_header = &req->io_header; 2880 SCSIDiskReq *r = &req->req; 2881 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 2882 int nb_logical_blocks; 2883 uint64_t lba; 2884 BlockAIOCB *aiocb; 2885 2886 /* This is not supported yet. It can only happen if the guest does 2887 * reads and writes that are not aligned to one logical sectors 2888 * _and_ cover multiple MemoryRegions. 2889 */ 2890 assert(offset % s->qdev.blocksize == 0); 2891 assert(iov->size % s->qdev.blocksize == 0); 2892 2893 io_header->interface_id = 'S'; 2894 2895 /* The data transfer comes from the QEMUIOVector. */ 2896 io_header->dxfer_direction = direction; 2897 io_header->dxfer_len = iov->size; 2898 io_header->dxferp = (void *)iov->iov; 2899 io_header->iovec_count = iov->niov; 2900 assert(io_header->iovec_count == iov->niov); /* no overflow! */ 2901 2902 /* Build a new CDB with the LBA and length patched in, in case 2903 * DMA helpers split the transfer in multiple segments. Do not 2904 * build a CDB smaller than what the guest wanted, and only build 2905 * a larger one if strictly necessary. 2906 */ 2907 io_header->cmdp = req->cdb; 2908 lba = offset / s->qdev.blocksize; 2909 nb_logical_blocks = io_header->dxfer_len / s->qdev.blocksize; 2910 2911 if ((req->cmd >> 5) == 0 && lba <= 0x1ffff) { 2912 /* 6-byte CDB */ 2913 stl_be_p(&req->cdb[0], lba | (req->cmd << 24)); 2914 req->cdb[4] = nb_logical_blocks; 2915 req->cdb[5] = 0; 2916 io_header->cmd_len = 6; 2917 } else if ((req->cmd >> 5) <= 1 && lba <= 0xffffffffULL) { 2918 /* 10-byte CDB */ 2919 req->cdb[0] = (req->cmd & 0x1f) | 0x20; 2920 req->cdb[1] = req->cdb1; 2921 stl_be_p(&req->cdb[2], lba); 2922 req->cdb[6] = req->group_number; 2923 stw_be_p(&req->cdb[7], nb_logical_blocks); 2924 req->cdb[9] = 0; 2925 io_header->cmd_len = 10; 2926 } else if ((req->cmd >> 5) != 4 && lba <= 0xffffffffULL) { 2927 /* 12-byte CDB */ 2928 req->cdb[0] = (req->cmd & 0x1f) | 0xA0; 2929 req->cdb[1] = req->cdb1; 2930 stl_be_p(&req->cdb[2], lba); 2931 stl_be_p(&req->cdb[6], nb_logical_blocks); 2932 req->cdb[10] = req->group_number; 2933 req->cdb[11] = 0; 2934 io_header->cmd_len = 12; 2935 } else { 2936 /* 16-byte CDB */ 2937 req->cdb[0] = (req->cmd & 0x1f) | 0x80; 2938 req->cdb[1] = req->cdb1; 2939 stq_be_p(&req->cdb[2], lba); 2940 stl_be_p(&req->cdb[10], nb_logical_blocks); 2941 req->cdb[14] = req->group_number; 2942 req->cdb[15] = 0; 2943 io_header->cmd_len = 16; 2944 } 2945 2946 /* The rest is as in scsi-generic.c. */ 2947 io_header->mx_sb_len = sizeof(r->req.sense); 2948 io_header->sbp = r->req.sense; 2949 io_header->timeout = s->qdev.io_timeout * 1000; 2950 io_header->usr_ptr = r; 2951 io_header->flags |= SG_FLAG_DIRECT_IO; 2952 req->cb = cb; 2953 req->cb_opaque = opaque; 2954 trace_scsi_disk_aio_sgio_command(r->req.tag, req->cdb[0], lba, 2955 nb_logical_blocks, io_header->timeout); 2956 aiocb = blk_aio_ioctl(s->qdev.conf.blk, SG_IO, io_header, scsi_block_sgio_complete, req); 2957 assert(aiocb != NULL); 2958 return aiocb; 2959 } 2960 2961 static bool scsi_block_no_fua(SCSICommand *cmd) 2962 { 2963 return false; 2964 } 2965 2966 static BlockAIOCB *scsi_block_dma_readv(int64_t offset, 2967 QEMUIOVector *iov, 2968 BlockCompletionFunc *cb, void *cb_opaque, 2969 void *opaque) 2970 { 2971 SCSIBlockReq *r = opaque; 2972 return scsi_block_do_sgio(r, offset, iov, 2973 SG_DXFER_FROM_DEV, cb, cb_opaque); 2974 } 2975 2976 static BlockAIOCB *scsi_block_dma_writev(int64_t offset, 2977 QEMUIOVector *iov, 2978 BlockCompletionFunc *cb, void *cb_opaque, 2979 void *opaque) 2980 { 2981 SCSIBlockReq *r = opaque; 2982 return scsi_block_do_sgio(r, offset, iov, 2983 SG_DXFER_TO_DEV, cb, cb_opaque); 2984 } 2985 2986 static bool scsi_block_is_passthrough(SCSIDiskState *s, uint8_t *buf) 2987 { 2988 switch (buf[0]) { 2989 case VERIFY_10: 2990 case VERIFY_12: 2991 case VERIFY_16: 2992 /* Check if BYTCHK == 0x01 (data-out buffer contains data 2993 * for the number of logical blocks specified in the length 2994 * field). For other modes, do not use scatter/gather operation. 2995 */ 2996 if ((buf[1] & 6) == 2) { 2997 return false; 2998 } 2999 break; 3000 3001 case READ_6: 3002 case READ_10: 3003 case READ_12: 3004 case READ_16: 3005 case WRITE_6: 3006 case WRITE_10: 3007 case WRITE_12: 3008 case WRITE_16: 3009 case WRITE_VERIFY_10: 3010 case WRITE_VERIFY_12: 3011 case WRITE_VERIFY_16: 3012 /* MMC writing cannot be done via DMA helpers, because it sometimes 3013 * involves writing beyond the maximum LBA or to negative LBA (lead-in). 3014 * We might use scsi_block_dma_reqops as long as no writing commands are 3015 * seen, but performance usually isn't paramount on optical media. So, 3016 * just make scsi-block operate the same as scsi-generic for them. 3017 */ 3018 if (s->qdev.type != TYPE_ROM) { 3019 return false; 3020 } 3021 break; 3022 3023 default: 3024 break; 3025 } 3026 3027 return true; 3028 } 3029 3030 3031 static int32_t scsi_block_dma_command(SCSIRequest *req, uint8_t *buf) 3032 { 3033 SCSIBlockReq *r = (SCSIBlockReq *)req; 3034 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, req->dev); 3035 3036 r->cmd = req->cmd.buf[0]; 3037 switch (r->cmd >> 5) { 3038 case 0: 3039 /* 6-byte CDB. */ 3040 r->cdb1 = r->group_number = 0; 3041 break; 3042 case 1: 3043 /* 10-byte CDB. */ 3044 r->cdb1 = req->cmd.buf[1]; 3045 r->group_number = req->cmd.buf[6]; 3046 break; 3047 case 4: 3048 /* 12-byte CDB. */ 3049 r->cdb1 = req->cmd.buf[1]; 3050 r->group_number = req->cmd.buf[10]; 3051 break; 3052 case 5: 3053 /* 16-byte CDB. */ 3054 r->cdb1 = req->cmd.buf[1]; 3055 r->group_number = req->cmd.buf[14]; 3056 break; 3057 default: 3058 abort(); 3059 } 3060 3061 /* Protection information is not supported. For SCSI versions 2 and 3062 * older (as determined by snooping the guest's INQUIRY commands), 3063 * there is no RD/WR/VRPROTECT, so skip this check in these versions. 3064 */ 3065 if (s->qdev.scsi_version > 2 && (req->cmd.buf[1] & 0xe0)) { 3066 scsi_check_condition(&r->req, SENSE_CODE(INVALID_FIELD)); 3067 return 0; 3068 } 3069 3070 return scsi_disk_dma_command(req, buf); 3071 } 3072 3073 static const SCSIReqOps scsi_block_dma_reqops = { 3074 .size = sizeof(SCSIBlockReq), 3075 .free_req = scsi_free_request, 3076 .send_command = scsi_block_dma_command, 3077 .read_data = scsi_read_data, 3078 .write_data = scsi_write_data, 3079 .get_buf = scsi_get_buf, 3080 .load_request = scsi_disk_load_request, 3081 .save_request = scsi_disk_save_request, 3082 }; 3083 3084 static SCSIRequest *scsi_block_new_request(SCSIDevice *d, uint32_t tag, 3085 uint32_t lun, uint8_t *buf, 3086 void *hba_private) 3087 { 3088 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); 3089 3090 if (scsi_block_is_passthrough(s, buf)) { 3091 return scsi_req_alloc(&scsi_generic_req_ops, &s->qdev, tag, lun, 3092 hba_private); 3093 } else { 3094 return scsi_req_alloc(&scsi_block_dma_reqops, &s->qdev, tag, lun, 3095 hba_private); 3096 } 3097 } 3098 3099 static int scsi_block_parse_cdb(SCSIDevice *d, SCSICommand *cmd, 3100 uint8_t *buf, size_t buf_len, 3101 void *hba_private) 3102 { 3103 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d); 3104 3105 if (scsi_block_is_passthrough(s, buf)) { 3106 return scsi_bus_parse_cdb(&s->qdev, cmd, buf, buf_len, hba_private); 3107 } else { 3108 return scsi_req_parse_cdb(&s->qdev, cmd, buf, buf_len); 3109 } 3110 } 3111 3112 static void scsi_block_update_sense(SCSIRequest *req) 3113 { 3114 SCSIDiskReq *r = DO_UPCAST(SCSIDiskReq, req, req); 3115 SCSIBlockReq *br = DO_UPCAST(SCSIBlockReq, req, r); 3116 r->req.sense_len = MIN(br->io_header.sb_len_wr, sizeof(r->req.sense)); 3117 } 3118 #endif 3119 3120 static 3121 BlockAIOCB *scsi_dma_readv(int64_t offset, QEMUIOVector *iov, 3122 BlockCompletionFunc *cb, void *cb_opaque, 3123 void *opaque) 3124 { 3125 SCSIDiskReq *r = opaque; 3126 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 3127 return blk_aio_preadv(s->qdev.conf.blk, offset, iov, 0, cb, cb_opaque); 3128 } 3129 3130 static 3131 BlockAIOCB *scsi_dma_writev(int64_t offset, QEMUIOVector *iov, 3132 BlockCompletionFunc *cb, void *cb_opaque, 3133 void *opaque) 3134 { 3135 SCSIDiskReq *r = opaque; 3136 SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev); 3137 return blk_aio_pwritev(s->qdev.conf.blk, offset, iov, 0, cb, cb_opaque); 3138 } 3139 3140 static char *scsi_property_get_loadparm(Object *obj, Error **errp) 3141 { 3142 return g_strdup(SCSI_DISK_BASE(obj)->loadparm); 3143 } 3144 3145 static void scsi_property_set_loadparm(Object *obj, const char *value, 3146 Error **errp) 3147 { 3148 void *lp_str; 3149 3150 if (object_property_get_int(obj, "bootindex", NULL) < 0) { 3151 error_setg(errp, "'loadparm' is only valid for boot devices"); 3152 return; 3153 } 3154 3155 lp_str = g_malloc0(strlen(value)); 3156 if (!qdev_prop_sanitize_s390x_loadparm(lp_str, value, errp)) { 3157 g_free(lp_str); 3158 return; 3159 } 3160 SCSI_DISK_BASE(obj)->loadparm = lp_str; 3161 } 3162 3163 static void scsi_property_add_specifics(DeviceClass *dc) 3164 { 3165 ObjectClass *oc = OBJECT_CLASS(dc); 3166 3167 /* The loadparm property is only supported on s390x */ 3168 if (arch_type & QEMU_ARCH_S390X) { 3169 object_class_property_add_str(oc, "loadparm", 3170 scsi_property_get_loadparm, 3171 scsi_property_set_loadparm); 3172 object_class_property_set_description(oc, "loadparm", 3173 "load parameter (s390x only)"); 3174 } 3175 } 3176 3177 static void scsi_disk_base_class_initfn(ObjectClass *klass, void *data) 3178 { 3179 DeviceClass *dc = DEVICE_CLASS(klass); 3180 SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass); 3181 3182 dc->fw_name = "disk"; 3183 device_class_set_legacy_reset(dc, scsi_disk_reset); 3184 sdc->dma_readv = scsi_dma_readv; 3185 sdc->dma_writev = scsi_dma_writev; 3186 sdc->need_fua_emulation = scsi_is_cmd_fua; 3187 } 3188 3189 static const TypeInfo scsi_disk_base_info = { 3190 .name = TYPE_SCSI_DISK_BASE, 3191 .parent = TYPE_SCSI_DEVICE, 3192 .class_init = scsi_disk_base_class_initfn, 3193 .instance_size = sizeof(SCSIDiskState), 3194 .class_size = sizeof(SCSIDiskClass), 3195 .abstract = true, 3196 }; 3197 3198 #define DEFINE_SCSI_DISK_PROPERTIES() \ 3199 DEFINE_PROP_DRIVE_IOTHREAD("drive", SCSIDiskState, qdev.conf.blk), \ 3200 DEFINE_BLOCK_PROPERTIES_BASE(SCSIDiskState, qdev.conf), \ 3201 DEFINE_BLOCK_ERROR_PROPERTIES(SCSIDiskState, qdev.conf), \ 3202 DEFINE_PROP_STRING("ver", SCSIDiskState, version), \ 3203 DEFINE_PROP_STRING("serial", SCSIDiskState, serial), \ 3204 DEFINE_PROP_STRING("vendor", SCSIDiskState, vendor), \ 3205 DEFINE_PROP_STRING("product", SCSIDiskState, product), \ 3206 DEFINE_PROP_STRING("device_id", SCSIDiskState, device_id), \ 3207 DEFINE_PROP_BOOL("migrate-emulated-scsi-request", SCSIDiskState, migrate_emulated_scsi_request, true) 3208 3209 3210 static Property scsi_hd_properties[] = { 3211 DEFINE_SCSI_DISK_PROPERTIES(), 3212 DEFINE_PROP_BIT("removable", SCSIDiskState, features, 3213 SCSI_DISK_F_REMOVABLE, false), 3214 DEFINE_PROP_BIT("dpofua", SCSIDiskState, features, 3215 SCSI_DISK_F_DPOFUA, false), 3216 DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0), 3217 DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0), 3218 DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0), 3219 DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size, 3220 DEFAULT_MAX_UNMAP_SIZE), 3221 DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, 3222 DEFAULT_MAX_IO_SIZE), 3223 DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), 3224 DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, 3225 5), 3226 DEFINE_PROP_BIT("quirk_mode_page_vendor_specific_apple", SCSIDiskState, 3227 quirks, SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE, 3228 0), 3229 DEFINE_BLOCK_CHS_PROPERTIES(SCSIDiskState, qdev.conf), 3230 DEFINE_PROP_END_OF_LIST(), 3231 }; 3232 3233 static const VMStateDescription vmstate_scsi_disk_state = { 3234 .name = "scsi-disk", 3235 .version_id = 1, 3236 .minimum_version_id = 1, 3237 .fields = (const VMStateField[]) { 3238 VMSTATE_SCSI_DEVICE(qdev, SCSIDiskState), 3239 VMSTATE_BOOL(media_changed, SCSIDiskState), 3240 VMSTATE_BOOL(media_event, SCSIDiskState), 3241 VMSTATE_BOOL(eject_request, SCSIDiskState), 3242 VMSTATE_BOOL(tray_open, SCSIDiskState), 3243 VMSTATE_BOOL(tray_locked, SCSIDiskState), 3244 VMSTATE_END_OF_LIST() 3245 } 3246 }; 3247 3248 static void scsi_hd_class_initfn(ObjectClass *klass, void *data) 3249 { 3250 DeviceClass *dc = DEVICE_CLASS(klass); 3251 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); 3252 3253 sc->realize = scsi_hd_realize; 3254 sc->unrealize = scsi_unrealize; 3255 sc->alloc_req = scsi_new_request; 3256 sc->unit_attention_reported = scsi_disk_unit_attention_reported; 3257 dc->desc = "virtual SCSI disk"; 3258 device_class_set_props(dc, scsi_hd_properties); 3259 dc->vmsd = &vmstate_scsi_disk_state; 3260 3261 scsi_property_add_specifics(dc); 3262 } 3263 3264 static const TypeInfo scsi_hd_info = { 3265 .name = "scsi-hd", 3266 .parent = TYPE_SCSI_DISK_BASE, 3267 .class_init = scsi_hd_class_initfn, 3268 }; 3269 3270 static Property scsi_cd_properties[] = { 3271 DEFINE_SCSI_DISK_PROPERTIES(), 3272 DEFINE_PROP_UINT64("wwn", SCSIDiskState, qdev.wwn, 0), 3273 DEFINE_PROP_UINT64("port_wwn", SCSIDiskState, qdev.port_wwn, 0), 3274 DEFINE_PROP_UINT16("port_index", SCSIDiskState, port_index, 0), 3275 DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, 3276 DEFAULT_MAX_IO_SIZE), 3277 DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, 3278 5), 3279 DEFINE_PROP_BIT("quirk_mode_page_apple_vendor", SCSIDiskState, quirks, 3280 SCSI_DISK_QUIRK_MODE_PAGE_APPLE_VENDOR, 0), 3281 DEFINE_PROP_BIT("quirk_mode_sense_rom_use_dbd", SCSIDiskState, quirks, 3282 SCSI_DISK_QUIRK_MODE_SENSE_ROM_USE_DBD, 0), 3283 DEFINE_PROP_BIT("quirk_mode_page_vendor_specific_apple", SCSIDiskState, 3284 quirks, SCSI_DISK_QUIRK_MODE_PAGE_VENDOR_SPECIFIC_APPLE, 3285 0), 3286 DEFINE_PROP_BIT("quirk_mode_page_truncated", SCSIDiskState, quirks, 3287 SCSI_DISK_QUIRK_MODE_PAGE_TRUNCATED, 0), 3288 DEFINE_PROP_END_OF_LIST(), 3289 }; 3290 3291 static void scsi_cd_class_initfn(ObjectClass *klass, void *data) 3292 { 3293 DeviceClass *dc = DEVICE_CLASS(klass); 3294 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); 3295 3296 sc->realize = scsi_cd_realize; 3297 sc->alloc_req = scsi_new_request; 3298 sc->unit_attention_reported = scsi_disk_unit_attention_reported; 3299 dc->desc = "virtual SCSI CD-ROM"; 3300 device_class_set_props(dc, scsi_cd_properties); 3301 dc->vmsd = &vmstate_scsi_disk_state; 3302 3303 scsi_property_add_specifics(dc); 3304 } 3305 3306 static const TypeInfo scsi_cd_info = { 3307 .name = "scsi-cd", 3308 .parent = TYPE_SCSI_DISK_BASE, 3309 .class_init = scsi_cd_class_initfn, 3310 }; 3311 3312 #ifdef __linux__ 3313 static Property scsi_block_properties[] = { 3314 DEFINE_BLOCK_ERROR_PROPERTIES(SCSIDiskState, qdev.conf), 3315 DEFINE_PROP_DRIVE("drive", SCSIDiskState, qdev.conf.blk), 3316 DEFINE_PROP_BOOL("share-rw", SCSIDiskState, qdev.conf.share_rw, false), 3317 DEFINE_PROP_UINT16("rotation_rate", SCSIDiskState, rotation_rate, 0), 3318 DEFINE_PROP_UINT64("max_unmap_size", SCSIDiskState, max_unmap_size, 3319 DEFAULT_MAX_UNMAP_SIZE), 3320 DEFINE_PROP_UINT64("max_io_size", SCSIDiskState, max_io_size, 3321 DEFAULT_MAX_IO_SIZE), 3322 DEFINE_PROP_INT32("scsi_version", SCSIDiskState, qdev.default_scsi_version, 3323 -1), 3324 DEFINE_PROP_UINT32("io_timeout", SCSIDiskState, qdev.io_timeout, 3325 DEFAULT_IO_TIMEOUT), 3326 DEFINE_PROP_END_OF_LIST(), 3327 }; 3328 3329 static void scsi_block_class_initfn(ObjectClass *klass, void *data) 3330 { 3331 DeviceClass *dc = DEVICE_CLASS(klass); 3332 SCSIDeviceClass *sc = SCSI_DEVICE_CLASS(klass); 3333 SCSIDiskClass *sdc = SCSI_DISK_BASE_CLASS(klass); 3334 3335 sc->realize = scsi_block_realize; 3336 sc->alloc_req = scsi_block_new_request; 3337 sc->parse_cdb = scsi_block_parse_cdb; 3338 sdc->dma_readv = scsi_block_dma_readv; 3339 sdc->dma_writev = scsi_block_dma_writev; 3340 sdc->update_sense = scsi_block_update_sense; 3341 sdc->need_fua_emulation = scsi_block_no_fua; 3342 dc->desc = "SCSI block device passthrough"; 3343 device_class_set_props(dc, scsi_block_properties); 3344 dc->vmsd = &vmstate_scsi_disk_state; 3345 } 3346 3347 static const TypeInfo scsi_block_info = { 3348 .name = "scsi-block", 3349 .parent = TYPE_SCSI_DISK_BASE, 3350 .class_init = scsi_block_class_initfn, 3351 }; 3352 #endif 3353 3354 static void scsi_disk_register_types(void) 3355 { 3356 type_register_static(&scsi_disk_base_info); 3357 type_register_static(&scsi_hd_info); 3358 type_register_static(&scsi_cd_info); 3359 #ifdef __linux__ 3360 type_register_static(&scsi_block_info); 3361 #endif 3362 } 3363 3364 type_init(scsi_disk_register_types) 3365