1 /* 2 * QEMU LSI53C895A SCSI Host Bus Adapter emulation 3 * 4 * Copyright (c) 2006 CodeSourcery. 5 * Written by Paul Brook 6 * 7 * This code is licensed under the LGPL. 8 */ 9 10 /* Note: 11 * LSI53C810 emulation is incorrect, in the sense that it supports 12 * features added in later evolutions. This should not be a problem, 13 * as well-behaved operating systems will not try to use them. 14 */ 15 16 #include "qemu/osdep.h" 17 18 #include "hw/hw.h" 19 #include "hw/pci/pci.h" 20 #include "hw/scsi/scsi.h" 21 #include "sysemu/dma.h" 22 #include "qemu/log.h" 23 24 //#define DEBUG_LSI 25 //#define DEBUG_LSI_REG 26 27 #ifdef DEBUG_LSI 28 #define DPRINTF(fmt, ...) \ 29 do { printf("lsi_scsi: " fmt , ## __VA_ARGS__); } while (0) 30 #define BADF(fmt, ...) \ 31 do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__); exit(1);} while (0) 32 #else 33 #define DPRINTF(fmt, ...) do {} while(0) 34 #define BADF(fmt, ...) \ 35 do { fprintf(stderr, "lsi_scsi: error: " fmt , ## __VA_ARGS__);} while (0) 36 #endif 37 38 static const char *names[] = { 39 "SCNTL0", "SCNTL1", "SCNTL2", "SCNTL3", "SCID", "SXFER", "SDID", "GPREG", 40 "SFBR", "SOCL", "SSID", "SBCL", "DSTAT", "SSTAT0", "SSTAT1", "SSTAT2", 41 "DSA0", "DSA1", "DSA2", "DSA3", "ISTAT", "0x15", "0x16", "0x17", 42 "CTEST0", "CTEST1", "CTEST2", "CTEST3", "TEMP0", "TEMP1", "TEMP2", "TEMP3", 43 "DFIFO", "CTEST4", "CTEST5", "CTEST6", "DBC0", "DBC1", "DBC2", "DCMD", 44 "DNAD0", "DNAD1", "DNAD2", "DNAD3", "DSP0", "DSP1", "DSP2", "DSP3", 45 "DSPS0", "DSPS1", "DSPS2", "DSPS3", "SCRATCHA0", "SCRATCHA1", "SCRATCHA2", "SCRATCHA3", 46 "DMODE", "DIEN", "SBR", "DCNTL", "ADDER0", "ADDER1", "ADDER2", "ADDER3", 47 "SIEN0", "SIEN1", "SIST0", "SIST1", "SLPAR", "0x45", "MACNTL", "GPCNTL", 48 "STIME0", "STIME1", "RESPID", "0x4b", "STEST0", "STEST1", "STEST2", "STEST3", 49 "SIDL", "0x51", "0x52", "0x53", "SODL", "0x55", "0x56", "0x57", 50 "SBDL", "0x59", "0x5a", "0x5b", "SCRATCHB0", "SCRATCHB1", "SCRATCHB2", "SCRATCHB3", 51 }; 52 53 #define LSI_MAX_DEVS 7 54 55 #define LSI_SCNTL0_TRG 0x01 56 #define LSI_SCNTL0_AAP 0x02 57 #define LSI_SCNTL0_EPC 0x08 58 #define LSI_SCNTL0_WATN 0x10 59 #define LSI_SCNTL0_START 0x20 60 61 #define LSI_SCNTL1_SST 0x01 62 #define LSI_SCNTL1_IARB 0x02 63 #define LSI_SCNTL1_AESP 0x04 64 #define LSI_SCNTL1_RST 0x08 65 #define LSI_SCNTL1_CON 0x10 66 #define LSI_SCNTL1_DHP 0x20 67 #define LSI_SCNTL1_ADB 0x40 68 #define LSI_SCNTL1_EXC 0x80 69 70 #define LSI_SCNTL2_WSR 0x01 71 #define LSI_SCNTL2_VUE0 0x02 72 #define LSI_SCNTL2_VUE1 0x04 73 #define LSI_SCNTL2_WSS 0x08 74 #define LSI_SCNTL2_SLPHBEN 0x10 75 #define LSI_SCNTL2_SLPMD 0x20 76 #define LSI_SCNTL2_CHM 0x40 77 #define LSI_SCNTL2_SDU 0x80 78 79 #define LSI_ISTAT0_DIP 0x01 80 #define LSI_ISTAT0_SIP 0x02 81 #define LSI_ISTAT0_INTF 0x04 82 #define LSI_ISTAT0_CON 0x08 83 #define LSI_ISTAT0_SEM 0x10 84 #define LSI_ISTAT0_SIGP 0x20 85 #define LSI_ISTAT0_SRST 0x40 86 #define LSI_ISTAT0_ABRT 0x80 87 88 #define LSI_ISTAT1_SI 0x01 89 #define LSI_ISTAT1_SRUN 0x02 90 #define LSI_ISTAT1_FLSH 0x04 91 92 #define LSI_SSTAT0_SDP0 0x01 93 #define LSI_SSTAT0_RST 0x02 94 #define LSI_SSTAT0_WOA 0x04 95 #define LSI_SSTAT0_LOA 0x08 96 #define LSI_SSTAT0_AIP 0x10 97 #define LSI_SSTAT0_OLF 0x20 98 #define LSI_SSTAT0_ORF 0x40 99 #define LSI_SSTAT0_ILF 0x80 100 101 #define LSI_SIST0_PAR 0x01 102 #define LSI_SIST0_RST 0x02 103 #define LSI_SIST0_UDC 0x04 104 #define LSI_SIST0_SGE 0x08 105 #define LSI_SIST0_RSL 0x10 106 #define LSI_SIST0_SEL 0x20 107 #define LSI_SIST0_CMP 0x40 108 #define LSI_SIST0_MA 0x80 109 110 #define LSI_SIST1_HTH 0x01 111 #define LSI_SIST1_GEN 0x02 112 #define LSI_SIST1_STO 0x04 113 #define LSI_SIST1_SBMC 0x10 114 115 #define LSI_SOCL_IO 0x01 116 #define LSI_SOCL_CD 0x02 117 #define LSI_SOCL_MSG 0x04 118 #define LSI_SOCL_ATN 0x08 119 #define LSI_SOCL_SEL 0x10 120 #define LSI_SOCL_BSY 0x20 121 #define LSI_SOCL_ACK 0x40 122 #define LSI_SOCL_REQ 0x80 123 124 #define LSI_DSTAT_IID 0x01 125 #define LSI_DSTAT_SIR 0x04 126 #define LSI_DSTAT_SSI 0x08 127 #define LSI_DSTAT_ABRT 0x10 128 #define LSI_DSTAT_BF 0x20 129 #define LSI_DSTAT_MDPE 0x40 130 #define LSI_DSTAT_DFE 0x80 131 132 #define LSI_DCNTL_COM 0x01 133 #define LSI_DCNTL_IRQD 0x02 134 #define LSI_DCNTL_STD 0x04 135 #define LSI_DCNTL_IRQM 0x08 136 #define LSI_DCNTL_SSM 0x10 137 #define LSI_DCNTL_PFEN 0x20 138 #define LSI_DCNTL_PFF 0x40 139 #define LSI_DCNTL_CLSE 0x80 140 141 #define LSI_DMODE_MAN 0x01 142 #define LSI_DMODE_BOF 0x02 143 #define LSI_DMODE_ERMP 0x04 144 #define LSI_DMODE_ERL 0x08 145 #define LSI_DMODE_DIOM 0x10 146 #define LSI_DMODE_SIOM 0x20 147 148 #define LSI_CTEST2_DACK 0x01 149 #define LSI_CTEST2_DREQ 0x02 150 #define LSI_CTEST2_TEOP 0x04 151 #define LSI_CTEST2_PCICIE 0x08 152 #define LSI_CTEST2_CM 0x10 153 #define LSI_CTEST2_CIO 0x20 154 #define LSI_CTEST2_SIGP 0x40 155 #define LSI_CTEST2_DDIR 0x80 156 157 #define LSI_CTEST5_BL2 0x04 158 #define LSI_CTEST5_DDIR 0x08 159 #define LSI_CTEST5_MASR 0x10 160 #define LSI_CTEST5_DFSN 0x20 161 #define LSI_CTEST5_BBCK 0x40 162 #define LSI_CTEST5_ADCK 0x80 163 164 #define LSI_CCNTL0_DILS 0x01 165 #define LSI_CCNTL0_DISFC 0x10 166 #define LSI_CCNTL0_ENNDJ 0x20 167 #define LSI_CCNTL0_PMJCTL 0x40 168 #define LSI_CCNTL0_ENPMJ 0x80 169 170 #define LSI_CCNTL1_EN64DBMV 0x01 171 #define LSI_CCNTL1_EN64TIBMV 0x02 172 #define LSI_CCNTL1_64TIMOD 0x04 173 #define LSI_CCNTL1_DDAC 0x08 174 #define LSI_CCNTL1_ZMOD 0x80 175 176 /* Enable Response to Reselection */ 177 #define LSI_SCID_RRE 0x60 178 179 #define LSI_CCNTL1_40BIT (LSI_CCNTL1_EN64TIBMV|LSI_CCNTL1_64TIMOD) 180 181 #define PHASE_DO 0 182 #define PHASE_DI 1 183 #define PHASE_CMD 2 184 #define PHASE_ST 3 185 #define PHASE_MO 6 186 #define PHASE_MI 7 187 #define PHASE_MASK 7 188 189 /* Maximum length of MSG IN data. */ 190 #define LSI_MAX_MSGIN_LEN 8 191 192 /* Flag set if this is a tagged command. */ 193 #define LSI_TAG_VALID (1 << 16) 194 195 typedef struct lsi_request { 196 SCSIRequest *req; 197 uint32_t tag; 198 uint32_t dma_len; 199 uint8_t *dma_buf; 200 uint32_t pending; 201 int out; 202 QTAILQ_ENTRY(lsi_request) next; 203 } lsi_request; 204 205 typedef struct { 206 /*< private >*/ 207 PCIDevice parent_obj; 208 /*< public >*/ 209 210 MemoryRegion mmio_io; 211 MemoryRegion ram_io; 212 MemoryRegion io_io; 213 AddressSpace pci_io_as; 214 215 int carry; /* ??? Should this be an a visible register somewhere? */ 216 int status; 217 /* Action to take at the end of a MSG IN phase. 218 0 = COMMAND, 1 = disconnect, 2 = DATA OUT, 3 = DATA IN. */ 219 int msg_action; 220 int msg_len; 221 uint8_t msg[LSI_MAX_MSGIN_LEN]; 222 /* 0 if SCRIPTS are running or stopped. 223 * 1 if a Wait Reselect instruction has been issued. 224 * 2 if processing DMA from lsi_execute_script. 225 * 3 if a DMA operation is in progress. */ 226 int waiting; 227 SCSIBus bus; 228 int current_lun; 229 /* The tag is a combination of the device ID and the SCSI tag. */ 230 uint32_t select_tag; 231 int command_complete; 232 QTAILQ_HEAD(, lsi_request) queue; 233 lsi_request *current; 234 235 uint32_t dsa; 236 uint32_t temp; 237 uint32_t dnad; 238 uint32_t dbc; 239 uint8_t istat0; 240 uint8_t istat1; 241 uint8_t dcmd; 242 uint8_t dstat; 243 uint8_t dien; 244 uint8_t sist0; 245 uint8_t sist1; 246 uint8_t sien0; 247 uint8_t sien1; 248 uint8_t mbox0; 249 uint8_t mbox1; 250 uint8_t dfifo; 251 uint8_t ctest2; 252 uint8_t ctest3; 253 uint8_t ctest4; 254 uint8_t ctest5; 255 uint8_t ccntl0; 256 uint8_t ccntl1; 257 uint32_t dsp; 258 uint32_t dsps; 259 uint8_t dmode; 260 uint8_t dcntl; 261 uint8_t scntl0; 262 uint8_t scntl1; 263 uint8_t scntl2; 264 uint8_t scntl3; 265 uint8_t sstat0; 266 uint8_t sstat1; 267 uint8_t scid; 268 uint8_t sxfer; 269 uint8_t socl; 270 uint8_t sdid; 271 uint8_t ssid; 272 uint8_t sfbr; 273 uint8_t stest1; 274 uint8_t stest2; 275 uint8_t stest3; 276 uint8_t sidl; 277 uint8_t stime0; 278 uint8_t respid0; 279 uint8_t respid1; 280 uint32_t mmrs; 281 uint32_t mmws; 282 uint32_t sfs; 283 uint32_t drs; 284 uint32_t sbms; 285 uint32_t dbms; 286 uint32_t dnad64; 287 uint32_t pmjad1; 288 uint32_t pmjad2; 289 uint32_t rbc; 290 uint32_t ua; 291 uint32_t ia; 292 uint32_t sbc; 293 uint32_t csbc; 294 uint32_t scratch[18]; /* SCRATCHA-SCRATCHR */ 295 uint8_t sbr; 296 uint32_t adder; 297 298 /* Script ram is stored as 32-bit words in host byteorder. */ 299 uint32_t script_ram[2048]; 300 } LSIState; 301 302 #define TYPE_LSI53C810 "lsi53c810" 303 #define TYPE_LSI53C895A "lsi53c895a" 304 305 #define LSI53C895A(obj) \ 306 OBJECT_CHECK(LSIState, (obj), TYPE_LSI53C895A) 307 308 static inline int lsi_irq_on_rsl(LSIState *s) 309 { 310 return (s->sien0 & LSI_SIST0_RSL) && (s->scid & LSI_SCID_RRE); 311 } 312 313 static void lsi_soft_reset(LSIState *s) 314 { 315 DPRINTF("Reset\n"); 316 s->carry = 0; 317 318 s->msg_action = 0; 319 s->msg_len = 0; 320 s->waiting = 0; 321 s->dsa = 0; 322 s->dnad = 0; 323 s->dbc = 0; 324 s->temp = 0; 325 memset(s->scratch, 0, sizeof(s->scratch)); 326 s->istat0 = 0; 327 s->istat1 = 0; 328 s->dcmd = 0x40; 329 s->dstat = 0; 330 s->dien = 0; 331 s->sist0 = 0; 332 s->sist1 = 0; 333 s->sien0 = 0; 334 s->sien1 = 0; 335 s->mbox0 = 0; 336 s->mbox1 = 0; 337 s->dfifo = 0; 338 s->ctest2 = LSI_CTEST2_DACK; 339 s->ctest3 = 0; 340 s->ctest4 = 0; 341 s->ctest5 = 0; 342 s->ccntl0 = 0; 343 s->ccntl1 = 0; 344 s->dsp = 0; 345 s->dsps = 0; 346 s->dmode = 0; 347 s->dcntl = 0; 348 s->scntl0 = 0xc0; 349 s->scntl1 = 0; 350 s->scntl2 = 0; 351 s->scntl3 = 0; 352 s->sstat0 = 0; 353 s->sstat1 = 0; 354 s->scid = 7; 355 s->sxfer = 0; 356 s->socl = 0; 357 s->sdid = 0; 358 s->ssid = 0; 359 s->stest1 = 0; 360 s->stest2 = 0; 361 s->stest3 = 0; 362 s->sidl = 0; 363 s->stime0 = 0; 364 s->respid0 = 0x80; 365 s->respid1 = 0; 366 s->mmrs = 0; 367 s->mmws = 0; 368 s->sfs = 0; 369 s->drs = 0; 370 s->sbms = 0; 371 s->dbms = 0; 372 s->dnad64 = 0; 373 s->pmjad1 = 0; 374 s->pmjad2 = 0; 375 s->rbc = 0; 376 s->ua = 0; 377 s->ia = 0; 378 s->sbc = 0; 379 s->csbc = 0; 380 s->sbr = 0; 381 assert(QTAILQ_EMPTY(&s->queue)); 382 assert(!s->current); 383 } 384 385 static int lsi_dma_40bit(LSIState *s) 386 { 387 if ((s->ccntl1 & LSI_CCNTL1_40BIT) == LSI_CCNTL1_40BIT) 388 return 1; 389 return 0; 390 } 391 392 static int lsi_dma_ti64bit(LSIState *s) 393 { 394 if ((s->ccntl1 & LSI_CCNTL1_EN64TIBMV) == LSI_CCNTL1_EN64TIBMV) 395 return 1; 396 return 0; 397 } 398 399 static int lsi_dma_64bit(LSIState *s) 400 { 401 if ((s->ccntl1 & LSI_CCNTL1_EN64DBMV) == LSI_CCNTL1_EN64DBMV) 402 return 1; 403 return 0; 404 } 405 406 static uint8_t lsi_reg_readb(LSIState *s, int offset); 407 static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val); 408 static void lsi_execute_script(LSIState *s); 409 static void lsi_reselect(LSIState *s, lsi_request *p); 410 411 static inline int lsi_mem_read(LSIState *s, dma_addr_t addr, 412 void *buf, dma_addr_t len) 413 { 414 if (s->dmode & LSI_DMODE_SIOM) { 415 address_space_read(&s->pci_io_as, addr, MEMTXATTRS_UNSPECIFIED, 416 buf, len); 417 return 0; 418 } else { 419 return pci_dma_read(PCI_DEVICE(s), addr, buf, len); 420 } 421 } 422 423 static inline int lsi_mem_write(LSIState *s, dma_addr_t addr, 424 const void *buf, dma_addr_t len) 425 { 426 if (s->dmode & LSI_DMODE_DIOM) { 427 address_space_write(&s->pci_io_as, addr, MEMTXATTRS_UNSPECIFIED, 428 buf, len); 429 return 0; 430 } else { 431 return pci_dma_write(PCI_DEVICE(s), addr, buf, len); 432 } 433 } 434 435 static inline uint32_t read_dword(LSIState *s, uint32_t addr) 436 { 437 uint32_t buf; 438 439 pci_dma_read(PCI_DEVICE(s), addr, &buf, 4); 440 return cpu_to_le32(buf); 441 } 442 443 static void lsi_stop_script(LSIState *s) 444 { 445 s->istat1 &= ~LSI_ISTAT1_SRUN; 446 } 447 448 static void lsi_update_irq(LSIState *s) 449 { 450 PCIDevice *d = PCI_DEVICE(s); 451 int level; 452 static int last_level; 453 lsi_request *p; 454 455 /* It's unclear whether the DIP/SIP bits should be cleared when the 456 Interrupt Status Registers are cleared or when istat0 is read. 457 We currently do the formwer, which seems to work. */ 458 level = 0; 459 if (s->dstat) { 460 if (s->dstat & s->dien) 461 level = 1; 462 s->istat0 |= LSI_ISTAT0_DIP; 463 } else { 464 s->istat0 &= ~LSI_ISTAT0_DIP; 465 } 466 467 if (s->sist0 || s->sist1) { 468 if ((s->sist0 & s->sien0) || (s->sist1 & s->sien1)) 469 level = 1; 470 s->istat0 |= LSI_ISTAT0_SIP; 471 } else { 472 s->istat0 &= ~LSI_ISTAT0_SIP; 473 } 474 if (s->istat0 & LSI_ISTAT0_INTF) 475 level = 1; 476 477 if (level != last_level) { 478 DPRINTF("Update IRQ level %d dstat %02x sist %02x%02x\n", 479 level, s->dstat, s->sist1, s->sist0); 480 last_level = level; 481 } 482 pci_set_irq(d, level); 483 484 if (!level && lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON)) { 485 DPRINTF("Handled IRQs & disconnected, looking for pending " 486 "processes\n"); 487 QTAILQ_FOREACH(p, &s->queue, next) { 488 if (p->pending) { 489 lsi_reselect(s, p); 490 break; 491 } 492 } 493 } 494 } 495 496 /* Stop SCRIPTS execution and raise a SCSI interrupt. */ 497 static void lsi_script_scsi_interrupt(LSIState *s, int stat0, int stat1) 498 { 499 uint32_t mask0; 500 uint32_t mask1; 501 502 DPRINTF("SCSI Interrupt 0x%02x%02x prev 0x%02x%02x\n", 503 stat1, stat0, s->sist1, s->sist0); 504 s->sist0 |= stat0; 505 s->sist1 |= stat1; 506 /* Stop processor on fatal or unmasked interrupt. As a special hack 507 we don't stop processing when raising STO. Instead continue 508 execution and stop at the next insn that accesses the SCSI bus. */ 509 mask0 = s->sien0 | ~(LSI_SIST0_CMP | LSI_SIST0_SEL | LSI_SIST0_RSL); 510 mask1 = s->sien1 | ~(LSI_SIST1_GEN | LSI_SIST1_HTH); 511 mask1 &= ~LSI_SIST1_STO; 512 if (s->sist0 & mask0 || s->sist1 & mask1) { 513 lsi_stop_script(s); 514 } 515 lsi_update_irq(s); 516 } 517 518 /* Stop SCRIPTS execution and raise a DMA interrupt. */ 519 static void lsi_script_dma_interrupt(LSIState *s, int stat) 520 { 521 DPRINTF("DMA Interrupt 0x%x prev 0x%x\n", stat, s->dstat); 522 s->dstat |= stat; 523 lsi_update_irq(s); 524 lsi_stop_script(s); 525 } 526 527 static inline void lsi_set_phase(LSIState *s, int phase) 528 { 529 s->sstat1 = (s->sstat1 & ~PHASE_MASK) | phase; 530 } 531 532 static void lsi_bad_phase(LSIState *s, int out, int new_phase) 533 { 534 /* Trigger a phase mismatch. */ 535 if (s->ccntl0 & LSI_CCNTL0_ENPMJ) { 536 if ((s->ccntl0 & LSI_CCNTL0_PMJCTL)) { 537 s->dsp = out ? s->pmjad1 : s->pmjad2; 538 } else { 539 s->dsp = (s->scntl2 & LSI_SCNTL2_WSR ? s->pmjad2 : s->pmjad1); 540 } 541 DPRINTF("Data phase mismatch jump to %08x\n", s->dsp); 542 } else { 543 DPRINTF("Phase mismatch interrupt\n"); 544 lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0); 545 lsi_stop_script(s); 546 } 547 lsi_set_phase(s, new_phase); 548 } 549 550 551 /* Resume SCRIPTS execution after a DMA operation. */ 552 static void lsi_resume_script(LSIState *s) 553 { 554 if (s->waiting != 2) { 555 s->waiting = 0; 556 lsi_execute_script(s); 557 } else { 558 s->waiting = 0; 559 } 560 } 561 562 static void lsi_disconnect(LSIState *s) 563 { 564 s->scntl1 &= ~LSI_SCNTL1_CON; 565 s->sstat1 &= ~PHASE_MASK; 566 } 567 568 static void lsi_bad_selection(LSIState *s, uint32_t id) 569 { 570 DPRINTF("Selected absent target %d\n", id); 571 lsi_script_scsi_interrupt(s, 0, LSI_SIST1_STO); 572 lsi_disconnect(s); 573 } 574 575 /* Initiate a SCSI layer data transfer. */ 576 static void lsi_do_dma(LSIState *s, int out) 577 { 578 uint32_t count; 579 dma_addr_t addr; 580 SCSIDevice *dev; 581 582 assert(s->current); 583 if (!s->current->dma_len) { 584 /* Wait until data is available. */ 585 DPRINTF("DMA no data available\n"); 586 return; 587 } 588 589 dev = s->current->req->dev; 590 assert(dev); 591 592 count = s->dbc; 593 if (count > s->current->dma_len) 594 count = s->current->dma_len; 595 596 addr = s->dnad; 597 /* both 40 and Table Indirect 64-bit DMAs store upper bits in dnad64 */ 598 if (lsi_dma_40bit(s) || lsi_dma_ti64bit(s)) 599 addr |= ((uint64_t)s->dnad64 << 32); 600 else if (s->dbms) 601 addr |= ((uint64_t)s->dbms << 32); 602 else if (s->sbms) 603 addr |= ((uint64_t)s->sbms << 32); 604 605 DPRINTF("DMA addr=0x" DMA_ADDR_FMT " len=%d\n", addr, count); 606 s->csbc += count; 607 s->dnad += count; 608 s->dbc -= count; 609 if (s->current->dma_buf == NULL) { 610 s->current->dma_buf = scsi_req_get_buf(s->current->req); 611 } 612 /* ??? Set SFBR to first data byte. */ 613 if (out) { 614 lsi_mem_read(s, addr, s->current->dma_buf, count); 615 } else { 616 lsi_mem_write(s, addr, s->current->dma_buf, count); 617 } 618 s->current->dma_len -= count; 619 if (s->current->dma_len == 0) { 620 s->current->dma_buf = NULL; 621 scsi_req_continue(s->current->req); 622 } else { 623 s->current->dma_buf += count; 624 lsi_resume_script(s); 625 } 626 } 627 628 629 /* Add a command to the queue. */ 630 static void lsi_queue_command(LSIState *s) 631 { 632 lsi_request *p = s->current; 633 634 DPRINTF("Queueing tag=0x%x\n", p->tag); 635 assert(s->current != NULL); 636 assert(s->current->dma_len == 0); 637 QTAILQ_INSERT_TAIL(&s->queue, s->current, next); 638 s->current = NULL; 639 640 p->pending = 0; 641 p->out = (s->sstat1 & PHASE_MASK) == PHASE_DO; 642 } 643 644 /* Queue a byte for a MSG IN phase. */ 645 static void lsi_add_msg_byte(LSIState *s, uint8_t data) 646 { 647 if (s->msg_len >= LSI_MAX_MSGIN_LEN) { 648 BADF("MSG IN data too long\n"); 649 } else { 650 DPRINTF("MSG IN 0x%02x\n", data); 651 s->msg[s->msg_len++] = data; 652 } 653 } 654 655 /* Perform reselection to continue a command. */ 656 static void lsi_reselect(LSIState *s, lsi_request *p) 657 { 658 int id; 659 660 assert(s->current == NULL); 661 QTAILQ_REMOVE(&s->queue, p, next); 662 s->current = p; 663 664 id = (p->tag >> 8) & 0xf; 665 s->ssid = id | 0x80; 666 /* LSI53C700 Family Compatibility, see LSI53C895A 4-73 */ 667 if (!(s->dcntl & LSI_DCNTL_COM)) { 668 s->sfbr = 1 << (id & 0x7); 669 } 670 DPRINTF("Reselected target %d\n", id); 671 s->scntl1 |= LSI_SCNTL1_CON; 672 lsi_set_phase(s, PHASE_MI); 673 s->msg_action = p->out ? 2 : 3; 674 s->current->dma_len = p->pending; 675 lsi_add_msg_byte(s, 0x80); 676 if (s->current->tag & LSI_TAG_VALID) { 677 lsi_add_msg_byte(s, 0x20); 678 lsi_add_msg_byte(s, p->tag & 0xff); 679 } 680 681 if (lsi_irq_on_rsl(s)) { 682 lsi_script_scsi_interrupt(s, LSI_SIST0_RSL, 0); 683 } 684 } 685 686 static lsi_request *lsi_find_by_tag(LSIState *s, uint32_t tag) 687 { 688 lsi_request *p; 689 690 QTAILQ_FOREACH(p, &s->queue, next) { 691 if (p->tag == tag) { 692 return p; 693 } 694 } 695 696 return NULL; 697 } 698 699 static void lsi_request_free(LSIState *s, lsi_request *p) 700 { 701 if (p == s->current) { 702 s->current = NULL; 703 } else { 704 QTAILQ_REMOVE(&s->queue, p, next); 705 } 706 g_free(p); 707 } 708 709 static void lsi_request_cancelled(SCSIRequest *req) 710 { 711 LSIState *s = LSI53C895A(req->bus->qbus.parent); 712 lsi_request *p = req->hba_private; 713 714 req->hba_private = NULL; 715 lsi_request_free(s, p); 716 scsi_req_unref(req); 717 } 718 719 /* Record that data is available for a queued command. Returns zero if 720 the device was reselected, nonzero if the IO is deferred. */ 721 static int lsi_queue_req(LSIState *s, SCSIRequest *req, uint32_t len) 722 { 723 lsi_request *p = req->hba_private; 724 725 if (p->pending) { 726 BADF("Multiple IO pending for request %p\n", p); 727 } 728 p->pending = len; 729 /* Reselect if waiting for it, or if reselection triggers an IRQ 730 and the bus is free. 731 Since no interrupt stacking is implemented in the emulation, it 732 is also required that there are no pending interrupts waiting 733 for service from the device driver. */ 734 if (s->waiting == 1 || 735 (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON) && 736 !(s->istat0 & (LSI_ISTAT0_SIP | LSI_ISTAT0_DIP)))) { 737 /* Reselect device. */ 738 lsi_reselect(s, p); 739 return 0; 740 } else { 741 DPRINTF("Queueing IO tag=0x%x\n", p->tag); 742 p->pending = len; 743 return 1; 744 } 745 } 746 747 /* Callback to indicate that the SCSI layer has completed a command. */ 748 static void lsi_command_complete(SCSIRequest *req, uint32_t status, size_t resid) 749 { 750 LSIState *s = LSI53C895A(req->bus->qbus.parent); 751 int out; 752 753 out = (s->sstat1 & PHASE_MASK) == PHASE_DO; 754 DPRINTF("Command complete status=%d\n", (int)status); 755 s->status = status; 756 s->command_complete = 2; 757 if (s->waiting && s->dbc != 0) { 758 /* Raise phase mismatch for short transfers. */ 759 lsi_bad_phase(s, out, PHASE_ST); 760 } else { 761 lsi_set_phase(s, PHASE_ST); 762 } 763 764 if (req->hba_private == s->current) { 765 req->hba_private = NULL; 766 lsi_request_free(s, s->current); 767 scsi_req_unref(req); 768 } 769 lsi_resume_script(s); 770 } 771 772 /* Callback to indicate that the SCSI layer has completed a transfer. */ 773 static void lsi_transfer_data(SCSIRequest *req, uint32_t len) 774 { 775 LSIState *s = LSI53C895A(req->bus->qbus.parent); 776 int out; 777 778 assert(req->hba_private); 779 if (s->waiting == 1 || req->hba_private != s->current || 780 (lsi_irq_on_rsl(s) && !(s->scntl1 & LSI_SCNTL1_CON))) { 781 if (lsi_queue_req(s, req, len)) { 782 return; 783 } 784 } 785 786 out = (s->sstat1 & PHASE_MASK) == PHASE_DO; 787 788 /* host adapter (re)connected */ 789 DPRINTF("Data ready tag=0x%x len=%d\n", req->tag, len); 790 s->current->dma_len = len; 791 s->command_complete = 1; 792 if (s->waiting) { 793 if (s->waiting == 1 || s->dbc == 0) { 794 lsi_resume_script(s); 795 } else { 796 lsi_do_dma(s, out); 797 } 798 } 799 } 800 801 static void lsi_do_command(LSIState *s) 802 { 803 SCSIDevice *dev; 804 uint8_t buf[16]; 805 uint32_t id; 806 int n; 807 808 DPRINTF("Send command len=%d\n", s->dbc); 809 if (s->dbc > 16) 810 s->dbc = 16; 811 pci_dma_read(PCI_DEVICE(s), s->dnad, buf, s->dbc); 812 s->sfbr = buf[0]; 813 s->command_complete = 0; 814 815 id = (s->select_tag >> 8) & 0xf; 816 dev = scsi_device_find(&s->bus, 0, id, s->current_lun); 817 if (!dev) { 818 lsi_bad_selection(s, id); 819 return; 820 } 821 822 assert(s->current == NULL); 823 s->current = g_new0(lsi_request, 1); 824 s->current->tag = s->select_tag; 825 s->current->req = scsi_req_new(dev, s->current->tag, s->current_lun, buf, 826 s->current); 827 828 n = scsi_req_enqueue(s->current->req); 829 if (n) { 830 if (n > 0) { 831 lsi_set_phase(s, PHASE_DI); 832 } else if (n < 0) { 833 lsi_set_phase(s, PHASE_DO); 834 } 835 scsi_req_continue(s->current->req); 836 } 837 if (!s->command_complete) { 838 if (n) { 839 /* Command did not complete immediately so disconnect. */ 840 lsi_add_msg_byte(s, 2); /* SAVE DATA POINTER */ 841 lsi_add_msg_byte(s, 4); /* DISCONNECT */ 842 /* wait data */ 843 lsi_set_phase(s, PHASE_MI); 844 s->msg_action = 1; 845 lsi_queue_command(s); 846 } else { 847 /* wait command complete */ 848 lsi_set_phase(s, PHASE_DI); 849 } 850 } 851 } 852 853 static void lsi_do_status(LSIState *s) 854 { 855 uint8_t status; 856 DPRINTF("Get status len=%d status=%d\n", s->dbc, s->status); 857 if (s->dbc != 1) 858 BADF("Bad Status move\n"); 859 s->dbc = 1; 860 status = s->status; 861 s->sfbr = status; 862 pci_dma_write(PCI_DEVICE(s), s->dnad, &status, 1); 863 lsi_set_phase(s, PHASE_MI); 864 s->msg_action = 1; 865 lsi_add_msg_byte(s, 0); /* COMMAND COMPLETE */ 866 } 867 868 static void lsi_do_msgin(LSIState *s) 869 { 870 int len; 871 DPRINTF("Message in len=%d/%d\n", s->dbc, s->msg_len); 872 s->sfbr = s->msg[0]; 873 len = s->msg_len; 874 if (len > s->dbc) 875 len = s->dbc; 876 pci_dma_write(PCI_DEVICE(s), s->dnad, s->msg, len); 877 /* Linux drivers rely on the last byte being in the SIDL. */ 878 s->sidl = s->msg[len - 1]; 879 s->msg_len -= len; 880 if (s->msg_len) { 881 memmove(s->msg, s->msg + len, s->msg_len); 882 } else { 883 /* ??? Check if ATN (not yet implemented) is asserted and maybe 884 switch to PHASE_MO. */ 885 switch (s->msg_action) { 886 case 0: 887 lsi_set_phase(s, PHASE_CMD); 888 break; 889 case 1: 890 lsi_disconnect(s); 891 break; 892 case 2: 893 lsi_set_phase(s, PHASE_DO); 894 break; 895 case 3: 896 lsi_set_phase(s, PHASE_DI); 897 break; 898 default: 899 abort(); 900 } 901 } 902 } 903 904 /* Read the next byte during a MSGOUT phase. */ 905 static uint8_t lsi_get_msgbyte(LSIState *s) 906 { 907 uint8_t data; 908 pci_dma_read(PCI_DEVICE(s), s->dnad, &data, 1); 909 s->dnad++; 910 s->dbc--; 911 return data; 912 } 913 914 /* Skip the next n bytes during a MSGOUT phase. */ 915 static void lsi_skip_msgbytes(LSIState *s, unsigned int n) 916 { 917 s->dnad += n; 918 s->dbc -= n; 919 } 920 921 static void lsi_do_msgout(LSIState *s) 922 { 923 uint8_t msg; 924 int len; 925 uint32_t current_tag; 926 lsi_request *current_req, *p, *p_next; 927 928 if (s->current) { 929 current_tag = s->current->tag; 930 current_req = s->current; 931 } else { 932 current_tag = s->select_tag; 933 current_req = lsi_find_by_tag(s, current_tag); 934 } 935 936 DPRINTF("MSG out len=%d\n", s->dbc); 937 while (s->dbc) { 938 msg = lsi_get_msgbyte(s); 939 s->sfbr = msg; 940 941 switch (msg) { 942 case 0x04: 943 DPRINTF("MSG: Disconnect\n"); 944 lsi_disconnect(s); 945 break; 946 case 0x08: 947 DPRINTF("MSG: No Operation\n"); 948 lsi_set_phase(s, PHASE_CMD); 949 break; 950 case 0x01: 951 len = lsi_get_msgbyte(s); 952 msg = lsi_get_msgbyte(s); 953 (void)len; /* avoid a warning about unused variable*/ 954 DPRINTF("Extended message 0x%x (len %d)\n", msg, len); 955 switch (msg) { 956 case 1: 957 DPRINTF("SDTR (ignored)\n"); 958 lsi_skip_msgbytes(s, 2); 959 break; 960 case 3: 961 DPRINTF("WDTR (ignored)\n"); 962 lsi_skip_msgbytes(s, 1); 963 break; 964 default: 965 goto bad; 966 } 967 break; 968 case 0x20: /* SIMPLE queue */ 969 s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; 970 DPRINTF("SIMPLE queue tag=0x%x\n", s->select_tag & 0xff); 971 break; 972 case 0x21: /* HEAD of queue */ 973 BADF("HEAD queue not implemented\n"); 974 s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; 975 break; 976 case 0x22: /* ORDERED queue */ 977 BADF("ORDERED queue not implemented\n"); 978 s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID; 979 break; 980 case 0x0d: 981 /* The ABORT TAG message clears the current I/O process only. */ 982 DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag); 983 if (current_req) { 984 scsi_req_cancel(current_req->req); 985 } 986 lsi_disconnect(s); 987 break; 988 case 0x06: 989 case 0x0e: 990 case 0x0c: 991 /* The ABORT message clears all I/O processes for the selecting 992 initiator on the specified logical unit of the target. */ 993 if (msg == 0x06) { 994 DPRINTF("MSG: ABORT tag=0x%x\n", current_tag); 995 } 996 /* The CLEAR QUEUE message clears all I/O processes for all 997 initiators on the specified logical unit of the target. */ 998 if (msg == 0x0e) { 999 DPRINTF("MSG: CLEAR QUEUE tag=0x%x\n", current_tag); 1000 } 1001 /* The BUS DEVICE RESET message clears all I/O processes for all 1002 initiators on all logical units of the target. */ 1003 if (msg == 0x0c) { 1004 DPRINTF("MSG: BUS DEVICE RESET tag=0x%x\n", current_tag); 1005 } 1006 1007 /* clear the current I/O process */ 1008 if (s->current) { 1009 scsi_req_cancel(s->current->req); 1010 } 1011 1012 /* As the current implemented devices scsi_disk and scsi_generic 1013 only support one LUN, we don't need to keep track of LUNs. 1014 Clearing I/O processes for other initiators could be possible 1015 for scsi_generic by sending a SG_SCSI_RESET to the /dev/sgX 1016 device, but this is currently not implemented (and seems not 1017 to be really necessary). So let's simply clear all queued 1018 commands for the current device: */ 1019 QTAILQ_FOREACH_SAFE(p, &s->queue, next, p_next) { 1020 if ((p->tag & 0x0000ff00) == (current_tag & 0x0000ff00)) { 1021 scsi_req_cancel(p->req); 1022 } 1023 } 1024 1025 lsi_disconnect(s); 1026 break; 1027 default: 1028 if ((msg & 0x80) == 0) { 1029 goto bad; 1030 } 1031 s->current_lun = msg & 7; 1032 DPRINTF("Select LUN %d\n", s->current_lun); 1033 lsi_set_phase(s, PHASE_CMD); 1034 break; 1035 } 1036 } 1037 return; 1038 bad: 1039 BADF("Unimplemented message 0x%02x\n", msg); 1040 lsi_set_phase(s, PHASE_MI); 1041 lsi_add_msg_byte(s, 7); /* MESSAGE REJECT */ 1042 s->msg_action = 0; 1043 } 1044 1045 #define LSI_BUF_SIZE 4096 1046 static void lsi_memcpy(LSIState *s, uint32_t dest, uint32_t src, int count) 1047 { 1048 int n; 1049 uint8_t buf[LSI_BUF_SIZE]; 1050 1051 DPRINTF("memcpy dest 0x%08x src 0x%08x count %d\n", dest, src, count); 1052 while (count) { 1053 n = (count > LSI_BUF_SIZE) ? LSI_BUF_SIZE : count; 1054 lsi_mem_read(s, src, buf, n); 1055 lsi_mem_write(s, dest, buf, n); 1056 src += n; 1057 dest += n; 1058 count -= n; 1059 } 1060 } 1061 1062 static void lsi_wait_reselect(LSIState *s) 1063 { 1064 lsi_request *p; 1065 1066 DPRINTF("Wait Reselect\n"); 1067 1068 QTAILQ_FOREACH(p, &s->queue, next) { 1069 if (p->pending) { 1070 lsi_reselect(s, p); 1071 break; 1072 } 1073 } 1074 if (s->current == NULL) { 1075 s->waiting = 1; 1076 } 1077 } 1078 1079 static void lsi_execute_script(LSIState *s) 1080 { 1081 PCIDevice *pci_dev = PCI_DEVICE(s); 1082 uint32_t insn; 1083 uint32_t addr, addr_high; 1084 int opcode; 1085 int insn_processed = 0; 1086 1087 s->istat1 |= LSI_ISTAT1_SRUN; 1088 again: 1089 insn_processed++; 1090 insn = read_dword(s, s->dsp); 1091 if (!insn) { 1092 /* If we receive an empty opcode increment the DSP by 4 bytes 1093 instead of 8 and execute the next opcode at that location */ 1094 s->dsp += 4; 1095 goto again; 1096 } 1097 addr = read_dword(s, s->dsp + 4); 1098 addr_high = 0; 1099 DPRINTF("SCRIPTS dsp=%08x opcode %08x arg %08x\n", s->dsp, insn, addr); 1100 s->dsps = addr; 1101 s->dcmd = insn >> 24; 1102 s->dsp += 8; 1103 switch (insn >> 30) { 1104 case 0: /* Block move. */ 1105 if (s->sist1 & LSI_SIST1_STO) { 1106 DPRINTF("Delayed select timeout\n"); 1107 lsi_stop_script(s); 1108 break; 1109 } 1110 s->dbc = insn & 0xffffff; 1111 s->rbc = s->dbc; 1112 /* ??? Set ESA. */ 1113 s->ia = s->dsp - 8; 1114 if (insn & (1 << 29)) { 1115 /* Indirect addressing. */ 1116 addr = read_dword(s, addr); 1117 } else if (insn & (1 << 28)) { 1118 uint32_t buf[2]; 1119 int32_t offset; 1120 /* Table indirect addressing. */ 1121 1122 /* 32-bit Table indirect */ 1123 offset = sextract32(addr, 0, 24); 1124 pci_dma_read(pci_dev, s->dsa + offset, buf, 8); 1125 /* byte count is stored in bits 0:23 only */ 1126 s->dbc = cpu_to_le32(buf[0]) & 0xffffff; 1127 s->rbc = s->dbc; 1128 addr = cpu_to_le32(buf[1]); 1129 1130 /* 40-bit DMA, upper addr bits [39:32] stored in first DWORD of 1131 * table, bits [31:24] */ 1132 if (lsi_dma_40bit(s)) 1133 addr_high = cpu_to_le32(buf[0]) >> 24; 1134 else if (lsi_dma_ti64bit(s)) { 1135 int selector = (cpu_to_le32(buf[0]) >> 24) & 0x1f; 1136 switch (selector) { 1137 case 0 ... 0x0f: 1138 /* offset index into scratch registers since 1139 * TI64 mode can use registers C to R */ 1140 addr_high = s->scratch[2 + selector]; 1141 break; 1142 case 0x10: 1143 addr_high = s->mmrs; 1144 break; 1145 case 0x11: 1146 addr_high = s->mmws; 1147 break; 1148 case 0x12: 1149 addr_high = s->sfs; 1150 break; 1151 case 0x13: 1152 addr_high = s->drs; 1153 break; 1154 case 0x14: 1155 addr_high = s->sbms; 1156 break; 1157 case 0x15: 1158 addr_high = s->dbms; 1159 break; 1160 default: 1161 BADF("Illegal selector specified (0x%x > 0x15)" 1162 " for 64-bit DMA block move", selector); 1163 break; 1164 } 1165 } 1166 } else if (lsi_dma_64bit(s)) { 1167 /* fetch a 3rd dword if 64-bit direct move is enabled and 1168 only if we're not doing table indirect or indirect addressing */ 1169 s->dbms = read_dword(s, s->dsp); 1170 s->dsp += 4; 1171 s->ia = s->dsp - 12; 1172 } 1173 if ((s->sstat1 & PHASE_MASK) != ((insn >> 24) & 7)) { 1174 DPRINTF("Wrong phase got %d expected %d\n", 1175 s->sstat1 & PHASE_MASK, (insn >> 24) & 7); 1176 lsi_script_scsi_interrupt(s, LSI_SIST0_MA, 0); 1177 break; 1178 } 1179 s->dnad = addr; 1180 s->dnad64 = addr_high; 1181 switch (s->sstat1 & 0x7) { 1182 case PHASE_DO: 1183 s->waiting = 2; 1184 lsi_do_dma(s, 1); 1185 if (s->waiting) 1186 s->waiting = 3; 1187 break; 1188 case PHASE_DI: 1189 s->waiting = 2; 1190 lsi_do_dma(s, 0); 1191 if (s->waiting) 1192 s->waiting = 3; 1193 break; 1194 case PHASE_CMD: 1195 lsi_do_command(s); 1196 break; 1197 case PHASE_ST: 1198 lsi_do_status(s); 1199 break; 1200 case PHASE_MO: 1201 lsi_do_msgout(s); 1202 break; 1203 case PHASE_MI: 1204 lsi_do_msgin(s); 1205 break; 1206 default: 1207 BADF("Unimplemented phase %d\n", s->sstat1 & PHASE_MASK); 1208 exit(1); 1209 } 1210 s->dfifo = s->dbc & 0xff; 1211 s->ctest5 = (s->ctest5 & 0xfc) | ((s->dbc >> 8) & 3); 1212 s->sbc = s->dbc; 1213 s->rbc -= s->dbc; 1214 s->ua = addr + s->dbc; 1215 break; 1216 1217 case 1: /* IO or Read/Write instruction. */ 1218 opcode = (insn >> 27) & 7; 1219 if (opcode < 5) { 1220 uint32_t id; 1221 1222 if (insn & (1 << 25)) { 1223 id = read_dword(s, s->dsa + sextract32(insn, 0, 24)); 1224 } else { 1225 id = insn; 1226 } 1227 id = (id >> 16) & 0xf; 1228 if (insn & (1 << 26)) { 1229 addr = s->dsp + sextract32(addr, 0, 24); 1230 } 1231 s->dnad = addr; 1232 switch (opcode) { 1233 case 0: /* Select */ 1234 s->sdid = id; 1235 if (s->scntl1 & LSI_SCNTL1_CON) { 1236 DPRINTF("Already reselected, jumping to alternative address\n"); 1237 s->dsp = s->dnad; 1238 break; 1239 } 1240 s->sstat0 |= LSI_SSTAT0_WOA; 1241 s->scntl1 &= ~LSI_SCNTL1_IARB; 1242 if (!scsi_device_find(&s->bus, 0, id, 0)) { 1243 lsi_bad_selection(s, id); 1244 break; 1245 } 1246 DPRINTF("Selected target %d%s\n", 1247 id, insn & (1 << 3) ? " ATN" : ""); 1248 /* ??? Linux drivers compain when this is set. Maybe 1249 it only applies in low-level mode (unimplemented). 1250 lsi_script_scsi_interrupt(s, LSI_SIST0_CMP, 0); */ 1251 s->select_tag = id << 8; 1252 s->scntl1 |= LSI_SCNTL1_CON; 1253 if (insn & (1 << 3)) { 1254 s->socl |= LSI_SOCL_ATN; 1255 } 1256 lsi_set_phase(s, PHASE_MO); 1257 break; 1258 case 1: /* Disconnect */ 1259 DPRINTF("Wait Disconnect\n"); 1260 s->scntl1 &= ~LSI_SCNTL1_CON; 1261 break; 1262 case 2: /* Wait Reselect */ 1263 if (!lsi_irq_on_rsl(s)) { 1264 lsi_wait_reselect(s); 1265 } 1266 break; 1267 case 3: /* Set */ 1268 DPRINTF("Set%s%s%s%s\n", 1269 insn & (1 << 3) ? " ATN" : "", 1270 insn & (1 << 6) ? " ACK" : "", 1271 insn & (1 << 9) ? " TM" : "", 1272 insn & (1 << 10) ? " CC" : ""); 1273 if (insn & (1 << 3)) { 1274 s->socl |= LSI_SOCL_ATN; 1275 lsi_set_phase(s, PHASE_MO); 1276 } 1277 if (insn & (1 << 9)) { 1278 BADF("Target mode not implemented\n"); 1279 exit(1); 1280 } 1281 if (insn & (1 << 10)) 1282 s->carry = 1; 1283 break; 1284 case 4: /* Clear */ 1285 DPRINTF("Clear%s%s%s%s\n", 1286 insn & (1 << 3) ? " ATN" : "", 1287 insn & (1 << 6) ? " ACK" : "", 1288 insn & (1 << 9) ? " TM" : "", 1289 insn & (1 << 10) ? " CC" : ""); 1290 if (insn & (1 << 3)) { 1291 s->socl &= ~LSI_SOCL_ATN; 1292 } 1293 if (insn & (1 << 10)) 1294 s->carry = 0; 1295 break; 1296 } 1297 } else { 1298 uint8_t op0; 1299 uint8_t op1; 1300 uint8_t data8; 1301 int reg; 1302 int operator; 1303 #ifdef DEBUG_LSI 1304 static const char *opcode_names[3] = 1305 {"Write", "Read", "Read-Modify-Write"}; 1306 static const char *operator_names[8] = 1307 {"MOV", "SHL", "OR", "XOR", "AND", "SHR", "ADD", "ADC"}; 1308 #endif 1309 1310 reg = ((insn >> 16) & 0x7f) | (insn & 0x80); 1311 data8 = (insn >> 8) & 0xff; 1312 opcode = (insn >> 27) & 7; 1313 operator = (insn >> 24) & 7; 1314 DPRINTF("%s reg 0x%x %s data8=0x%02x sfbr=0x%02x%s\n", 1315 opcode_names[opcode - 5], reg, 1316 operator_names[operator], data8, s->sfbr, 1317 (insn & (1 << 23)) ? " SFBR" : ""); 1318 op0 = op1 = 0; 1319 switch (opcode) { 1320 case 5: /* From SFBR */ 1321 op0 = s->sfbr; 1322 op1 = data8; 1323 break; 1324 case 6: /* To SFBR */ 1325 if (operator) 1326 op0 = lsi_reg_readb(s, reg); 1327 op1 = data8; 1328 break; 1329 case 7: /* Read-modify-write */ 1330 if (operator) 1331 op0 = lsi_reg_readb(s, reg); 1332 if (insn & (1 << 23)) { 1333 op1 = s->sfbr; 1334 } else { 1335 op1 = data8; 1336 } 1337 break; 1338 } 1339 1340 switch (operator) { 1341 case 0: /* move */ 1342 op0 = op1; 1343 break; 1344 case 1: /* Shift left */ 1345 op1 = op0 >> 7; 1346 op0 = (op0 << 1) | s->carry; 1347 s->carry = op1; 1348 break; 1349 case 2: /* OR */ 1350 op0 |= op1; 1351 break; 1352 case 3: /* XOR */ 1353 op0 ^= op1; 1354 break; 1355 case 4: /* AND */ 1356 op0 &= op1; 1357 break; 1358 case 5: /* SHR */ 1359 op1 = op0 & 1; 1360 op0 = (op0 >> 1) | (s->carry << 7); 1361 s->carry = op1; 1362 break; 1363 case 6: /* ADD */ 1364 op0 += op1; 1365 s->carry = op0 < op1; 1366 break; 1367 case 7: /* ADC */ 1368 op0 += op1 + s->carry; 1369 if (s->carry) 1370 s->carry = op0 <= op1; 1371 else 1372 s->carry = op0 < op1; 1373 break; 1374 } 1375 1376 switch (opcode) { 1377 case 5: /* From SFBR */ 1378 case 7: /* Read-modify-write */ 1379 lsi_reg_writeb(s, reg, op0); 1380 break; 1381 case 6: /* To SFBR */ 1382 s->sfbr = op0; 1383 break; 1384 } 1385 } 1386 break; 1387 1388 case 2: /* Transfer Control. */ 1389 { 1390 int cond; 1391 int jmp; 1392 1393 if ((insn & 0x002e0000) == 0) { 1394 DPRINTF("NOP\n"); 1395 break; 1396 } 1397 if (s->sist1 & LSI_SIST1_STO) { 1398 DPRINTF("Delayed select timeout\n"); 1399 lsi_stop_script(s); 1400 break; 1401 } 1402 cond = jmp = (insn & (1 << 19)) != 0; 1403 if (cond == jmp && (insn & (1 << 21))) { 1404 DPRINTF("Compare carry %d\n", s->carry == jmp); 1405 cond = s->carry != 0; 1406 } 1407 if (cond == jmp && (insn & (1 << 17))) { 1408 DPRINTF("Compare phase %d %c= %d\n", 1409 (s->sstat1 & PHASE_MASK), 1410 jmp ? '=' : '!', 1411 ((insn >> 24) & 7)); 1412 cond = (s->sstat1 & PHASE_MASK) == ((insn >> 24) & 7); 1413 } 1414 if (cond == jmp && (insn & (1 << 18))) { 1415 uint8_t mask; 1416 1417 mask = (~insn >> 8) & 0xff; 1418 DPRINTF("Compare data 0x%x & 0x%x %c= 0x%x\n", 1419 s->sfbr, mask, jmp ? '=' : '!', insn & mask); 1420 cond = (s->sfbr & mask) == (insn & mask); 1421 } 1422 if (cond == jmp) { 1423 if (insn & (1 << 23)) { 1424 /* Relative address. */ 1425 addr = s->dsp + sextract32(addr, 0, 24); 1426 } 1427 switch ((insn >> 27) & 7) { 1428 case 0: /* Jump */ 1429 DPRINTF("Jump to 0x%08x\n", addr); 1430 s->adder = addr; 1431 s->dsp = addr; 1432 break; 1433 case 1: /* Call */ 1434 DPRINTF("Call 0x%08x\n", addr); 1435 s->temp = s->dsp; 1436 s->dsp = addr; 1437 break; 1438 case 2: /* Return */ 1439 DPRINTF("Return to 0x%08x\n", s->temp); 1440 s->dsp = s->temp; 1441 break; 1442 case 3: /* Interrupt */ 1443 DPRINTF("Interrupt 0x%08x\n", s->dsps); 1444 if ((insn & (1 << 20)) != 0) { 1445 s->istat0 |= LSI_ISTAT0_INTF; 1446 lsi_update_irq(s); 1447 } else { 1448 lsi_script_dma_interrupt(s, LSI_DSTAT_SIR); 1449 } 1450 break; 1451 default: 1452 DPRINTF("Illegal transfer control\n"); 1453 lsi_script_dma_interrupt(s, LSI_DSTAT_IID); 1454 break; 1455 } 1456 } else { 1457 DPRINTF("Control condition failed\n"); 1458 } 1459 } 1460 break; 1461 1462 case 3: 1463 if ((insn & (1 << 29)) == 0) { 1464 /* Memory move. */ 1465 uint32_t dest; 1466 /* ??? The docs imply the destination address is loaded into 1467 the TEMP register. However the Linux drivers rely on 1468 the value being presrved. */ 1469 dest = read_dword(s, s->dsp); 1470 s->dsp += 4; 1471 lsi_memcpy(s, dest, addr, insn & 0xffffff); 1472 } else { 1473 uint8_t data[7]; 1474 int reg; 1475 int n; 1476 int i; 1477 1478 if (insn & (1 << 28)) { 1479 addr = s->dsa + sextract32(addr, 0, 24); 1480 } 1481 n = (insn & 7); 1482 reg = (insn >> 16) & 0xff; 1483 if (insn & (1 << 24)) { 1484 pci_dma_read(pci_dev, addr, data, n); 1485 DPRINTF("Load reg 0x%x size %d addr 0x%08x = %08x\n", reg, n, 1486 addr, *(int *)data); 1487 for (i = 0; i < n; i++) { 1488 lsi_reg_writeb(s, reg + i, data[i]); 1489 } 1490 } else { 1491 DPRINTF("Store reg 0x%x size %d addr 0x%08x\n", reg, n, addr); 1492 for (i = 0; i < n; i++) { 1493 data[i] = lsi_reg_readb(s, reg + i); 1494 } 1495 pci_dma_write(pci_dev, addr, data, n); 1496 } 1497 } 1498 } 1499 if (insn_processed > 10000 && !s->waiting) { 1500 /* Some windows drivers make the device spin waiting for a memory 1501 location to change. If we have been executed a lot of code then 1502 assume this is the case and force an unexpected device disconnect. 1503 This is apparently sufficient to beat the drivers into submission. 1504 */ 1505 if (!(s->sien0 & LSI_SIST0_UDC)) 1506 fprintf(stderr, "inf. loop with UDC masked\n"); 1507 lsi_script_scsi_interrupt(s, LSI_SIST0_UDC, 0); 1508 lsi_disconnect(s); 1509 } else if (s->istat1 & LSI_ISTAT1_SRUN && !s->waiting) { 1510 if (s->dcntl & LSI_DCNTL_SSM) { 1511 lsi_script_dma_interrupt(s, LSI_DSTAT_SSI); 1512 } else { 1513 goto again; 1514 } 1515 } 1516 DPRINTF("SCRIPTS execution stopped\n"); 1517 } 1518 1519 static uint8_t lsi_reg_readb(LSIState *s, int offset) 1520 { 1521 uint8_t ret; 1522 1523 #define CASE_GET_REG24(name, addr) \ 1524 case addr: ret = s->name & 0xff; break; \ 1525 case addr + 1: ret = (s->name >> 8) & 0xff; break; \ 1526 case addr + 2: ret = (s->name >> 16) & 0xff; break; 1527 1528 #define CASE_GET_REG32(name, addr) \ 1529 case addr: ret = s->name & 0xff; break; \ 1530 case addr + 1: ret = (s->name >> 8) & 0xff; break; \ 1531 case addr + 2: ret = (s->name >> 16) & 0xff; break; \ 1532 case addr + 3: ret = (s->name >> 24) & 0xff; break; 1533 1534 switch (offset) { 1535 case 0x00: /* SCNTL0 */ 1536 ret = s->scntl0; 1537 break; 1538 case 0x01: /* SCNTL1 */ 1539 ret = s->scntl1; 1540 break; 1541 case 0x02: /* SCNTL2 */ 1542 ret = s->scntl2; 1543 break; 1544 case 0x03: /* SCNTL3 */ 1545 ret = s->scntl3; 1546 break; 1547 case 0x04: /* SCID */ 1548 ret = s->scid; 1549 break; 1550 case 0x05: /* SXFER */ 1551 ret = s->sxfer; 1552 break; 1553 case 0x06: /* SDID */ 1554 ret = s->sdid; 1555 break; 1556 case 0x07: /* GPREG0 */ 1557 ret = 0x7f; 1558 break; 1559 case 0x08: /* Revision ID */ 1560 ret = 0x00; 1561 break; 1562 case 0x09: /* SOCL */ 1563 ret = s->socl; 1564 break; 1565 case 0xa: /* SSID */ 1566 ret = s->ssid; 1567 break; 1568 case 0xb: /* SBCL */ 1569 /* ??? This is not correct. However it's (hopefully) only 1570 used for diagnostics, so should be ok. */ 1571 ret = 0; 1572 break; 1573 case 0xc: /* DSTAT */ 1574 ret = s->dstat | LSI_DSTAT_DFE; 1575 if ((s->istat0 & LSI_ISTAT0_INTF) == 0) 1576 s->dstat = 0; 1577 lsi_update_irq(s); 1578 break; 1579 case 0x0d: /* SSTAT0 */ 1580 ret = s->sstat0; 1581 break; 1582 case 0x0e: /* SSTAT1 */ 1583 ret = s->sstat1; 1584 break; 1585 case 0x0f: /* SSTAT2 */ 1586 ret = s->scntl1 & LSI_SCNTL1_CON ? 0 : 2; 1587 break; 1588 CASE_GET_REG32(dsa, 0x10) 1589 case 0x14: /* ISTAT0 */ 1590 ret = s->istat0; 1591 break; 1592 case 0x15: /* ISTAT1 */ 1593 ret = s->istat1; 1594 break; 1595 case 0x16: /* MBOX0 */ 1596 ret = s->mbox0; 1597 break; 1598 case 0x17: /* MBOX1 */ 1599 ret = s->mbox1; 1600 break; 1601 case 0x18: /* CTEST0 */ 1602 ret = 0xff; 1603 break; 1604 case 0x19: /* CTEST1 */ 1605 ret = 0; 1606 break; 1607 case 0x1a: /* CTEST2 */ 1608 ret = s->ctest2 | LSI_CTEST2_DACK | LSI_CTEST2_CM; 1609 if (s->istat0 & LSI_ISTAT0_SIGP) { 1610 s->istat0 &= ~LSI_ISTAT0_SIGP; 1611 ret |= LSI_CTEST2_SIGP; 1612 } 1613 break; 1614 case 0x1b: /* CTEST3 */ 1615 ret = s->ctest3; 1616 break; 1617 CASE_GET_REG32(temp, 0x1c) 1618 case 0x20: /* DFIFO */ 1619 ret = 0; 1620 break; 1621 case 0x21: /* CTEST4 */ 1622 ret = s->ctest4; 1623 break; 1624 case 0x22: /* CTEST5 */ 1625 ret = s->ctest5; 1626 break; 1627 case 0x23: /* CTEST6 */ 1628 ret = 0; 1629 break; 1630 CASE_GET_REG24(dbc, 0x24) 1631 case 0x27: /* DCMD */ 1632 ret = s->dcmd; 1633 break; 1634 CASE_GET_REG32(dnad, 0x28) 1635 CASE_GET_REG32(dsp, 0x2c) 1636 CASE_GET_REG32(dsps, 0x30) 1637 CASE_GET_REG32(scratch[0], 0x34) 1638 case 0x38: /* DMODE */ 1639 ret = s->dmode; 1640 break; 1641 case 0x39: /* DIEN */ 1642 ret = s->dien; 1643 break; 1644 case 0x3a: /* SBR */ 1645 ret = s->sbr; 1646 break; 1647 case 0x3b: /* DCNTL */ 1648 ret = s->dcntl; 1649 break; 1650 /* ADDER Output (Debug of relative jump address) */ 1651 CASE_GET_REG32(adder, 0x3c) 1652 case 0x40: /* SIEN0 */ 1653 ret = s->sien0; 1654 break; 1655 case 0x41: /* SIEN1 */ 1656 ret = s->sien1; 1657 break; 1658 case 0x42: /* SIST0 */ 1659 ret = s->sist0; 1660 s->sist0 = 0; 1661 lsi_update_irq(s); 1662 break; 1663 case 0x43: /* SIST1 */ 1664 ret = s->sist1; 1665 s->sist1 = 0; 1666 lsi_update_irq(s); 1667 break; 1668 case 0x46: /* MACNTL */ 1669 ret = 0x0f; 1670 break; 1671 case 0x47: /* GPCNTL0 */ 1672 ret = 0x0f; 1673 break; 1674 case 0x48: /* STIME0 */ 1675 ret = s->stime0; 1676 break; 1677 case 0x4a: /* RESPID0 */ 1678 ret = s->respid0; 1679 break; 1680 case 0x4b: /* RESPID1 */ 1681 ret = s->respid1; 1682 break; 1683 case 0x4d: /* STEST1 */ 1684 ret = s->stest1; 1685 break; 1686 case 0x4e: /* STEST2 */ 1687 ret = s->stest2; 1688 break; 1689 case 0x4f: /* STEST3 */ 1690 ret = s->stest3; 1691 break; 1692 case 0x50: /* SIDL */ 1693 /* This is needed by the linux drivers. We currently only update it 1694 during the MSG IN phase. */ 1695 ret = s->sidl; 1696 break; 1697 case 0x52: /* STEST4 */ 1698 ret = 0xe0; 1699 break; 1700 case 0x56: /* CCNTL0 */ 1701 ret = s->ccntl0; 1702 break; 1703 case 0x57: /* CCNTL1 */ 1704 ret = s->ccntl1; 1705 break; 1706 case 0x58: /* SBDL */ 1707 /* Some drivers peek at the data bus during the MSG IN phase. */ 1708 if ((s->sstat1 & PHASE_MASK) == PHASE_MI) 1709 return s->msg[0]; 1710 ret = 0; 1711 break; 1712 case 0x59: /* SBDL high */ 1713 ret = 0; 1714 break; 1715 CASE_GET_REG32(mmrs, 0xa0) 1716 CASE_GET_REG32(mmws, 0xa4) 1717 CASE_GET_REG32(sfs, 0xa8) 1718 CASE_GET_REG32(drs, 0xac) 1719 CASE_GET_REG32(sbms, 0xb0) 1720 CASE_GET_REG32(dbms, 0xb4) 1721 CASE_GET_REG32(dnad64, 0xb8) 1722 CASE_GET_REG32(pmjad1, 0xc0) 1723 CASE_GET_REG32(pmjad2, 0xc4) 1724 CASE_GET_REG32(rbc, 0xc8) 1725 CASE_GET_REG32(ua, 0xcc) 1726 CASE_GET_REG32(ia, 0xd4) 1727 CASE_GET_REG32(sbc, 0xd8) 1728 CASE_GET_REG32(csbc, 0xdc) 1729 case 0x5c ... 0x9f: 1730 { 1731 int n; 1732 int shift; 1733 n = (offset - 0x58) >> 2; 1734 shift = (offset & 3) * 8; 1735 ret = (s->scratch[n] >> shift) & 0xff; 1736 break; 1737 } 1738 default: 1739 { 1740 qemu_log_mask(LOG_GUEST_ERROR, 1741 "lsi_scsi: invalid read from reg %s %x\n", 1742 offset < ARRAY_SIZE(names) ? names[offset] : "???", 1743 offset); 1744 ret = 0xff; 1745 break; 1746 } 1747 } 1748 #undef CASE_GET_REG24 1749 #undef CASE_GET_REG32 1750 1751 #ifdef DEBUG_LSI_REG 1752 DPRINTF("Read reg %s %x = %02x\n", 1753 offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, ret); 1754 #endif 1755 1756 return ret; 1757 } 1758 1759 static void lsi_reg_writeb(LSIState *s, int offset, uint8_t val) 1760 { 1761 #define CASE_SET_REG24(name, addr) \ 1762 case addr : s->name &= 0xffffff00; s->name |= val; break; \ 1763 case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \ 1764 case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; 1765 1766 #define CASE_SET_REG32(name, addr) \ 1767 case addr : s->name &= 0xffffff00; s->name |= val; break; \ 1768 case addr + 1: s->name &= 0xffff00ff; s->name |= val << 8; break; \ 1769 case addr + 2: s->name &= 0xff00ffff; s->name |= val << 16; break; \ 1770 case addr + 3: s->name &= 0x00ffffff; s->name |= val << 24; break; 1771 1772 #ifdef DEBUG_LSI_REG 1773 DPRINTF("Write reg %s %x = %02x\n", 1774 offset < ARRAY_SIZE(names) ? names[offset] : "???", offset, val); 1775 #endif 1776 switch (offset) { 1777 case 0x00: /* SCNTL0 */ 1778 s->scntl0 = val; 1779 if (val & LSI_SCNTL0_START) { 1780 BADF("Start sequence not implemented\n"); 1781 } 1782 break; 1783 case 0x01: /* SCNTL1 */ 1784 s->scntl1 = val & ~LSI_SCNTL1_SST; 1785 if (val & LSI_SCNTL1_IARB) { 1786 BADF("Immediate Arbritration not implemented\n"); 1787 } 1788 if (val & LSI_SCNTL1_RST) { 1789 if (!(s->sstat0 & LSI_SSTAT0_RST)) { 1790 qbus_reset_all(&s->bus.qbus); 1791 s->sstat0 |= LSI_SSTAT0_RST; 1792 lsi_script_scsi_interrupt(s, LSI_SIST0_RST, 0); 1793 } 1794 } else { 1795 s->sstat0 &= ~LSI_SSTAT0_RST; 1796 } 1797 break; 1798 case 0x02: /* SCNTL2 */ 1799 val &= ~(LSI_SCNTL2_WSR | LSI_SCNTL2_WSS); 1800 s->scntl2 = val; 1801 break; 1802 case 0x03: /* SCNTL3 */ 1803 s->scntl3 = val; 1804 break; 1805 case 0x04: /* SCID */ 1806 s->scid = val; 1807 break; 1808 case 0x05: /* SXFER */ 1809 s->sxfer = val; 1810 break; 1811 case 0x06: /* SDID */ 1812 if ((s->ssid & 0x80) && (val & 0xf) != (s->ssid & 0xf)) { 1813 BADF("Destination ID does not match SSID\n"); 1814 } 1815 s->sdid = val & 0xf; 1816 break; 1817 case 0x07: /* GPREG0 */ 1818 break; 1819 case 0x08: /* SFBR */ 1820 /* The CPU is not allowed to write to this register. However the 1821 SCRIPTS register move instructions are. */ 1822 s->sfbr = val; 1823 break; 1824 case 0x0a: case 0x0b: 1825 /* Openserver writes to these readonly registers on startup */ 1826 return; 1827 case 0x0c: case 0x0d: case 0x0e: case 0x0f: 1828 /* Linux writes to these readonly registers on startup. */ 1829 return; 1830 CASE_SET_REG32(dsa, 0x10) 1831 case 0x14: /* ISTAT0 */ 1832 s->istat0 = (s->istat0 & 0x0f) | (val & 0xf0); 1833 if (val & LSI_ISTAT0_ABRT) { 1834 lsi_script_dma_interrupt(s, LSI_DSTAT_ABRT); 1835 } 1836 if (val & LSI_ISTAT0_INTF) { 1837 s->istat0 &= ~LSI_ISTAT0_INTF; 1838 lsi_update_irq(s); 1839 } 1840 if (s->waiting == 1 && val & LSI_ISTAT0_SIGP) { 1841 DPRINTF("Woken by SIGP\n"); 1842 s->waiting = 0; 1843 s->dsp = s->dnad; 1844 lsi_execute_script(s); 1845 } 1846 if (val & LSI_ISTAT0_SRST) { 1847 qdev_reset_all(DEVICE(s)); 1848 } 1849 break; 1850 case 0x16: /* MBOX0 */ 1851 s->mbox0 = val; 1852 break; 1853 case 0x17: /* MBOX1 */ 1854 s->mbox1 = val; 1855 break; 1856 case 0x18: /* CTEST0 */ 1857 /* nothing to do */ 1858 break; 1859 case 0x1a: /* CTEST2 */ 1860 s->ctest2 = val & LSI_CTEST2_PCICIE; 1861 break; 1862 case 0x1b: /* CTEST3 */ 1863 s->ctest3 = val & 0x0f; 1864 break; 1865 CASE_SET_REG32(temp, 0x1c) 1866 case 0x21: /* CTEST4 */ 1867 if (val & 7) { 1868 BADF("Unimplemented CTEST4-FBL 0x%x\n", val); 1869 } 1870 s->ctest4 = val; 1871 break; 1872 case 0x22: /* CTEST5 */ 1873 if (val & (LSI_CTEST5_ADCK | LSI_CTEST5_BBCK)) { 1874 BADF("CTEST5 DMA increment not implemented\n"); 1875 } 1876 s->ctest5 = val; 1877 break; 1878 CASE_SET_REG24(dbc, 0x24) 1879 CASE_SET_REG32(dnad, 0x28) 1880 case 0x2c: /* DSP[0:7] */ 1881 s->dsp &= 0xffffff00; 1882 s->dsp |= val; 1883 break; 1884 case 0x2d: /* DSP[8:15] */ 1885 s->dsp &= 0xffff00ff; 1886 s->dsp |= val << 8; 1887 break; 1888 case 0x2e: /* DSP[16:23] */ 1889 s->dsp &= 0xff00ffff; 1890 s->dsp |= val << 16; 1891 break; 1892 case 0x2f: /* DSP[24:31] */ 1893 s->dsp &= 0x00ffffff; 1894 s->dsp |= val << 24; 1895 if ((s->dmode & LSI_DMODE_MAN) == 0 1896 && (s->istat1 & LSI_ISTAT1_SRUN) == 0) 1897 lsi_execute_script(s); 1898 break; 1899 CASE_SET_REG32(dsps, 0x30) 1900 CASE_SET_REG32(scratch[0], 0x34) 1901 case 0x38: /* DMODE */ 1902 s->dmode = val; 1903 break; 1904 case 0x39: /* DIEN */ 1905 s->dien = val; 1906 lsi_update_irq(s); 1907 break; 1908 case 0x3a: /* SBR */ 1909 s->sbr = val; 1910 break; 1911 case 0x3b: /* DCNTL */ 1912 s->dcntl = val & ~(LSI_DCNTL_PFF | LSI_DCNTL_STD); 1913 if ((val & LSI_DCNTL_STD) && (s->istat1 & LSI_ISTAT1_SRUN) == 0) 1914 lsi_execute_script(s); 1915 break; 1916 case 0x40: /* SIEN0 */ 1917 s->sien0 = val; 1918 lsi_update_irq(s); 1919 break; 1920 case 0x41: /* SIEN1 */ 1921 s->sien1 = val; 1922 lsi_update_irq(s); 1923 break; 1924 case 0x47: /* GPCNTL0 */ 1925 break; 1926 case 0x48: /* STIME0 */ 1927 s->stime0 = val; 1928 break; 1929 case 0x49: /* STIME1 */ 1930 if (val & 0xf) { 1931 DPRINTF("General purpose timer not implemented\n"); 1932 /* ??? Raising the interrupt immediately seems to be sufficient 1933 to keep the FreeBSD driver happy. */ 1934 lsi_script_scsi_interrupt(s, 0, LSI_SIST1_GEN); 1935 } 1936 break; 1937 case 0x4a: /* RESPID0 */ 1938 s->respid0 = val; 1939 break; 1940 case 0x4b: /* RESPID1 */ 1941 s->respid1 = val; 1942 break; 1943 case 0x4d: /* STEST1 */ 1944 s->stest1 = val; 1945 break; 1946 case 0x4e: /* STEST2 */ 1947 if (val & 1) { 1948 BADF("Low level mode not implemented\n"); 1949 } 1950 s->stest2 = val; 1951 break; 1952 case 0x4f: /* STEST3 */ 1953 if (val & 0x41) { 1954 BADF("SCSI FIFO test mode not implemented\n"); 1955 } 1956 s->stest3 = val; 1957 break; 1958 case 0x56: /* CCNTL0 */ 1959 s->ccntl0 = val; 1960 break; 1961 case 0x57: /* CCNTL1 */ 1962 s->ccntl1 = val; 1963 break; 1964 CASE_SET_REG32(mmrs, 0xa0) 1965 CASE_SET_REG32(mmws, 0xa4) 1966 CASE_SET_REG32(sfs, 0xa8) 1967 CASE_SET_REG32(drs, 0xac) 1968 CASE_SET_REG32(sbms, 0xb0) 1969 CASE_SET_REG32(dbms, 0xb4) 1970 CASE_SET_REG32(dnad64, 0xb8) 1971 CASE_SET_REG32(pmjad1, 0xc0) 1972 CASE_SET_REG32(pmjad2, 0xc4) 1973 CASE_SET_REG32(rbc, 0xc8) 1974 CASE_SET_REG32(ua, 0xcc) 1975 CASE_SET_REG32(ia, 0xd4) 1976 CASE_SET_REG32(sbc, 0xd8) 1977 CASE_SET_REG32(csbc, 0xdc) 1978 default: 1979 if (offset >= 0x5c && offset < 0xa0) { 1980 int n; 1981 int shift; 1982 n = (offset - 0x58) >> 2; 1983 shift = (offset & 3) * 8; 1984 s->scratch[n] = deposit32(s->scratch[n], shift, 8, val); 1985 } else { 1986 qemu_log_mask(LOG_GUEST_ERROR, 1987 "lsi_scsi: invalid write to reg %s %x (0x%02x)\n", 1988 offset < ARRAY_SIZE(names) ? names[offset] : "???", 1989 offset, val); 1990 } 1991 } 1992 #undef CASE_SET_REG24 1993 #undef CASE_SET_REG32 1994 } 1995 1996 static void lsi_mmio_write(void *opaque, hwaddr addr, 1997 uint64_t val, unsigned size) 1998 { 1999 LSIState *s = opaque; 2000 2001 lsi_reg_writeb(s, addr & 0xff, val); 2002 } 2003 2004 static uint64_t lsi_mmio_read(void *opaque, hwaddr addr, 2005 unsigned size) 2006 { 2007 LSIState *s = opaque; 2008 2009 return lsi_reg_readb(s, addr & 0xff); 2010 } 2011 2012 static const MemoryRegionOps lsi_mmio_ops = { 2013 .read = lsi_mmio_read, 2014 .write = lsi_mmio_write, 2015 .endianness = DEVICE_NATIVE_ENDIAN, 2016 .impl = { 2017 .min_access_size = 1, 2018 .max_access_size = 1, 2019 }, 2020 }; 2021 2022 static void lsi_ram_write(void *opaque, hwaddr addr, 2023 uint64_t val, unsigned size) 2024 { 2025 LSIState *s = opaque; 2026 uint32_t newval; 2027 uint32_t mask; 2028 int shift; 2029 2030 newval = s->script_ram[addr >> 2]; 2031 shift = (addr & 3) * 8; 2032 mask = ((uint64_t)1 << (size * 8)) - 1; 2033 newval &= ~(mask << shift); 2034 newval |= val << shift; 2035 s->script_ram[addr >> 2] = newval; 2036 } 2037 2038 static uint64_t lsi_ram_read(void *opaque, hwaddr addr, 2039 unsigned size) 2040 { 2041 LSIState *s = opaque; 2042 uint32_t val; 2043 uint32_t mask; 2044 2045 val = s->script_ram[addr >> 2]; 2046 mask = ((uint64_t)1 << (size * 8)) - 1; 2047 val >>= (addr & 3) * 8; 2048 return val & mask; 2049 } 2050 2051 static const MemoryRegionOps lsi_ram_ops = { 2052 .read = lsi_ram_read, 2053 .write = lsi_ram_write, 2054 .endianness = DEVICE_NATIVE_ENDIAN, 2055 }; 2056 2057 static uint64_t lsi_io_read(void *opaque, hwaddr addr, 2058 unsigned size) 2059 { 2060 LSIState *s = opaque; 2061 return lsi_reg_readb(s, addr & 0xff); 2062 } 2063 2064 static void lsi_io_write(void *opaque, hwaddr addr, 2065 uint64_t val, unsigned size) 2066 { 2067 LSIState *s = opaque; 2068 lsi_reg_writeb(s, addr & 0xff, val); 2069 } 2070 2071 static const MemoryRegionOps lsi_io_ops = { 2072 .read = lsi_io_read, 2073 .write = lsi_io_write, 2074 .endianness = DEVICE_NATIVE_ENDIAN, 2075 .impl = { 2076 .min_access_size = 1, 2077 .max_access_size = 1, 2078 }, 2079 }; 2080 2081 static void lsi_scsi_reset(DeviceState *dev) 2082 { 2083 LSIState *s = LSI53C895A(dev); 2084 2085 lsi_soft_reset(s); 2086 } 2087 2088 static void lsi_pre_save(void *opaque) 2089 { 2090 LSIState *s = opaque; 2091 2092 if (s->current) { 2093 assert(s->current->dma_buf == NULL); 2094 assert(s->current->dma_len == 0); 2095 } 2096 assert(QTAILQ_EMPTY(&s->queue)); 2097 } 2098 2099 static const VMStateDescription vmstate_lsi_scsi = { 2100 .name = "lsiscsi", 2101 .version_id = 0, 2102 .minimum_version_id = 0, 2103 .pre_save = lsi_pre_save, 2104 .fields = (VMStateField[]) { 2105 VMSTATE_PCI_DEVICE(parent_obj, LSIState), 2106 2107 VMSTATE_INT32(carry, LSIState), 2108 VMSTATE_INT32(status, LSIState), 2109 VMSTATE_INT32(msg_action, LSIState), 2110 VMSTATE_INT32(msg_len, LSIState), 2111 VMSTATE_BUFFER(msg, LSIState), 2112 VMSTATE_INT32(waiting, LSIState), 2113 2114 VMSTATE_UINT32(dsa, LSIState), 2115 VMSTATE_UINT32(temp, LSIState), 2116 VMSTATE_UINT32(dnad, LSIState), 2117 VMSTATE_UINT32(dbc, LSIState), 2118 VMSTATE_UINT8(istat0, LSIState), 2119 VMSTATE_UINT8(istat1, LSIState), 2120 VMSTATE_UINT8(dcmd, LSIState), 2121 VMSTATE_UINT8(dstat, LSIState), 2122 VMSTATE_UINT8(dien, LSIState), 2123 VMSTATE_UINT8(sist0, LSIState), 2124 VMSTATE_UINT8(sist1, LSIState), 2125 VMSTATE_UINT8(sien0, LSIState), 2126 VMSTATE_UINT8(sien1, LSIState), 2127 VMSTATE_UINT8(mbox0, LSIState), 2128 VMSTATE_UINT8(mbox1, LSIState), 2129 VMSTATE_UINT8(dfifo, LSIState), 2130 VMSTATE_UINT8(ctest2, LSIState), 2131 VMSTATE_UINT8(ctest3, LSIState), 2132 VMSTATE_UINT8(ctest4, LSIState), 2133 VMSTATE_UINT8(ctest5, LSIState), 2134 VMSTATE_UINT8(ccntl0, LSIState), 2135 VMSTATE_UINT8(ccntl1, LSIState), 2136 VMSTATE_UINT32(dsp, LSIState), 2137 VMSTATE_UINT32(dsps, LSIState), 2138 VMSTATE_UINT8(dmode, LSIState), 2139 VMSTATE_UINT8(dcntl, LSIState), 2140 VMSTATE_UINT8(scntl0, LSIState), 2141 VMSTATE_UINT8(scntl1, LSIState), 2142 VMSTATE_UINT8(scntl2, LSIState), 2143 VMSTATE_UINT8(scntl3, LSIState), 2144 VMSTATE_UINT8(sstat0, LSIState), 2145 VMSTATE_UINT8(sstat1, LSIState), 2146 VMSTATE_UINT8(scid, LSIState), 2147 VMSTATE_UINT8(sxfer, LSIState), 2148 VMSTATE_UINT8(socl, LSIState), 2149 VMSTATE_UINT8(sdid, LSIState), 2150 VMSTATE_UINT8(ssid, LSIState), 2151 VMSTATE_UINT8(sfbr, LSIState), 2152 VMSTATE_UINT8(stest1, LSIState), 2153 VMSTATE_UINT8(stest2, LSIState), 2154 VMSTATE_UINT8(stest3, LSIState), 2155 VMSTATE_UINT8(sidl, LSIState), 2156 VMSTATE_UINT8(stime0, LSIState), 2157 VMSTATE_UINT8(respid0, LSIState), 2158 VMSTATE_UINT8(respid1, LSIState), 2159 VMSTATE_UINT32(mmrs, LSIState), 2160 VMSTATE_UINT32(mmws, LSIState), 2161 VMSTATE_UINT32(sfs, LSIState), 2162 VMSTATE_UINT32(drs, LSIState), 2163 VMSTATE_UINT32(sbms, LSIState), 2164 VMSTATE_UINT32(dbms, LSIState), 2165 VMSTATE_UINT32(dnad64, LSIState), 2166 VMSTATE_UINT32(pmjad1, LSIState), 2167 VMSTATE_UINT32(pmjad2, LSIState), 2168 VMSTATE_UINT32(rbc, LSIState), 2169 VMSTATE_UINT32(ua, LSIState), 2170 VMSTATE_UINT32(ia, LSIState), 2171 VMSTATE_UINT32(sbc, LSIState), 2172 VMSTATE_UINT32(csbc, LSIState), 2173 VMSTATE_BUFFER_UNSAFE(scratch, LSIState, 0, 18 * sizeof(uint32_t)), 2174 VMSTATE_UINT8(sbr, LSIState), 2175 2176 VMSTATE_BUFFER_UNSAFE(script_ram, LSIState, 0, 2048 * sizeof(uint32_t)), 2177 VMSTATE_END_OF_LIST() 2178 } 2179 }; 2180 2181 static const struct SCSIBusInfo lsi_scsi_info = { 2182 .tcq = true, 2183 .max_target = LSI_MAX_DEVS, 2184 .max_lun = 0, /* LUN support is buggy */ 2185 2186 .transfer_data = lsi_transfer_data, 2187 .complete = lsi_command_complete, 2188 .cancel = lsi_request_cancelled 2189 }; 2190 2191 static void lsi_scsi_realize(PCIDevice *dev, Error **errp) 2192 { 2193 LSIState *s = LSI53C895A(dev); 2194 DeviceState *d = DEVICE(dev); 2195 uint8_t *pci_conf; 2196 2197 pci_conf = dev->config; 2198 2199 /* PCI latency timer = 255 */ 2200 pci_conf[PCI_LATENCY_TIMER] = 0xff; 2201 /* Interrupt pin A */ 2202 pci_conf[PCI_INTERRUPT_PIN] = 0x01; 2203 2204 memory_region_init_io(&s->mmio_io, OBJECT(s), &lsi_mmio_ops, s, 2205 "lsi-mmio", 0x400); 2206 memory_region_init_io(&s->ram_io, OBJECT(s), &lsi_ram_ops, s, 2207 "lsi-ram", 0x2000); 2208 memory_region_init_io(&s->io_io, OBJECT(s), &lsi_io_ops, s, 2209 "lsi-io", 256); 2210 2211 address_space_init(&s->pci_io_as, pci_address_space_io(dev), "lsi-pci-io"); 2212 2213 pci_register_bar(dev, 0, PCI_BASE_ADDRESS_SPACE_IO, &s->io_io); 2214 pci_register_bar(dev, 1, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->mmio_io); 2215 pci_register_bar(dev, 2, PCI_BASE_ADDRESS_SPACE_MEMORY, &s->ram_io); 2216 QTAILQ_INIT(&s->queue); 2217 2218 scsi_bus_new(&s->bus, sizeof(s->bus), d, &lsi_scsi_info, NULL); 2219 if (!d->hotplugged) { 2220 scsi_bus_legacy_handle_cmdline(&s->bus, errp); 2221 } 2222 } 2223 2224 static void lsi_scsi_unrealize(DeviceState *dev, Error **errp) 2225 { 2226 LSIState *s = LSI53C895A(dev); 2227 2228 address_space_destroy(&s->pci_io_as); 2229 } 2230 2231 static void lsi_class_init(ObjectClass *klass, void *data) 2232 { 2233 DeviceClass *dc = DEVICE_CLASS(klass); 2234 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 2235 2236 k->realize = lsi_scsi_realize; 2237 k->vendor_id = PCI_VENDOR_ID_LSI_LOGIC; 2238 k->device_id = PCI_DEVICE_ID_LSI_53C895A; 2239 k->class_id = PCI_CLASS_STORAGE_SCSI; 2240 k->subsystem_id = 0x1000; 2241 dc->unrealize = lsi_scsi_unrealize; 2242 dc->reset = lsi_scsi_reset; 2243 dc->vmsd = &vmstate_lsi_scsi; 2244 set_bit(DEVICE_CATEGORY_STORAGE, dc->categories); 2245 } 2246 2247 static const TypeInfo lsi_info = { 2248 .name = TYPE_LSI53C895A, 2249 .parent = TYPE_PCI_DEVICE, 2250 .instance_size = sizeof(LSIState), 2251 .class_init = lsi_class_init, 2252 }; 2253 2254 static void lsi53c810_class_init(ObjectClass *klass, void *data) 2255 { 2256 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 2257 2258 k->device_id = PCI_DEVICE_ID_LSI_53C810; 2259 } 2260 2261 static TypeInfo lsi53c810_info = { 2262 .name = TYPE_LSI53C810, 2263 .parent = TYPE_LSI53C895A, 2264 .class_init = lsi53c810_class_init, 2265 }; 2266 2267 static void lsi53c895a_register_types(void) 2268 { 2269 type_register_static(&lsi_info); 2270 type_register_static(&lsi53c810_info); 2271 } 2272 2273 type_init(lsi53c895a_register_types) 2274