xref: /openbmc/qemu/hw/s390x/ipl.c (revision 762c280d)
1 /*
2  * bootloader support
3  *
4  * Copyright IBM, Corp. 2012, 2020
5  *
6  * Authors:
7  *  Christian Borntraeger <borntraeger@de.ibm.com>
8  *  Janosch Frank <frankja@linux.ibm.com>
9  *
10  * This work is licensed under the terms of the GNU GPL, version 2 or (at your
11  * option) any later version.  See the COPYING file in the top-level directory.
12  *
13  */
14 
15 #include "qemu/osdep.h"
16 #include "qemu-common.h"
17 #include "qemu/datadir.h"
18 #include "qapi/error.h"
19 #include "sysemu/reset.h"
20 #include "sysemu/runstate.h"
21 #include "sysemu/tcg.h"
22 #include "elf.h"
23 #include "hw/loader.h"
24 #include "hw/qdev-properties.h"
25 #include "hw/boards.h"
26 #include "hw/s390x/virtio-ccw.h"
27 #include "hw/s390x/vfio-ccw.h"
28 #include "hw/s390x/css.h"
29 #include "hw/s390x/ebcdic.h"
30 #include "hw/s390x/pv.h"
31 #include "ipl.h"
32 #include "qemu/error-report.h"
33 #include "qemu/config-file.h"
34 #include "qemu/cutils.h"
35 #include "qemu/option.h"
36 #include "exec/exec-all.h"
37 
38 #define KERN_IMAGE_START                0x010000UL
39 #define LINUX_MAGIC_ADDR                0x010008UL
40 #define KERN_PARM_AREA_SIZE_ADDR        0x010430UL
41 #define KERN_PARM_AREA                  0x010480UL
42 #define LEGACY_KERN_PARM_AREA_SIZE      0x000380UL
43 #define INITRD_START                    0x800000UL
44 #define INITRD_PARM_START               0x010408UL
45 #define PARMFILE_START                  0x001000UL
46 #define ZIPL_IMAGE_START                0x009000UL
47 #define IPL_PSW_MASK                    (PSW_MASK_32 | PSW_MASK_64)
48 
49 static bool iplb_extended_needed(void *opaque)
50 {
51     S390IPLState *ipl = S390_IPL(object_resolve_path(TYPE_S390_IPL, NULL));
52 
53     return ipl->iplbext_migration;
54 }
55 
56 static const VMStateDescription vmstate_iplb_extended = {
57     .name = "ipl/iplb_extended",
58     .version_id = 0,
59     .minimum_version_id = 0,
60     .needed = iplb_extended_needed,
61     .fields = (VMStateField[]) {
62         VMSTATE_UINT8_ARRAY(reserved_ext, IplParameterBlock, 4096 - 200),
63         VMSTATE_END_OF_LIST()
64     }
65 };
66 
67 static const VMStateDescription vmstate_iplb = {
68     .name = "ipl/iplb",
69     .version_id = 0,
70     .minimum_version_id = 0,
71     .fields = (VMStateField[]) {
72         VMSTATE_UINT8_ARRAY(reserved1, IplParameterBlock, 110),
73         VMSTATE_UINT16(devno, IplParameterBlock),
74         VMSTATE_UINT8_ARRAY(reserved2, IplParameterBlock, 88),
75         VMSTATE_END_OF_LIST()
76     },
77     .subsections = (const VMStateDescription*[]) {
78         &vmstate_iplb_extended,
79         NULL
80     }
81 };
82 
83 static const VMStateDescription vmstate_ipl = {
84     .name = "ipl",
85     .version_id = 0,
86     .minimum_version_id = 0,
87     .fields = (VMStateField[]) {
88         VMSTATE_UINT64(compat_start_addr, S390IPLState),
89         VMSTATE_UINT64(compat_bios_start_addr, S390IPLState),
90         VMSTATE_STRUCT(iplb, S390IPLState, 0, vmstate_iplb, IplParameterBlock),
91         VMSTATE_BOOL(iplb_valid, S390IPLState),
92         VMSTATE_UINT8(cssid, S390IPLState),
93         VMSTATE_UINT8(ssid, S390IPLState),
94         VMSTATE_UINT16(devno, S390IPLState),
95         VMSTATE_END_OF_LIST()
96      }
97 };
98 
99 static S390IPLState *get_ipl_device(void)
100 {
101     return S390_IPL(object_resolve_path_type("", TYPE_S390_IPL, NULL));
102 }
103 
104 static uint64_t bios_translate_addr(void *opaque, uint64_t srcaddr)
105 {
106     uint64_t dstaddr = *(uint64_t *) opaque;
107     /*
108      * Assuming that our s390-ccw.img was linked for starting at address 0,
109      * we can simply add the destination address for the final location
110      */
111     return srcaddr + dstaddr;
112 }
113 
114 static uint64_t get_max_kernel_cmdline_size(void)
115 {
116     uint64_t *size_ptr = rom_ptr(KERN_PARM_AREA_SIZE_ADDR, sizeof(*size_ptr));
117 
118     if (size_ptr) {
119         uint64_t size;
120 
121         size = be64_to_cpu(*size_ptr);
122         if (size) {
123             return size;
124         }
125     }
126     return LEGACY_KERN_PARM_AREA_SIZE;
127 }
128 
129 static void s390_ipl_realize(DeviceState *dev, Error **errp)
130 {
131     MachineState *ms = MACHINE(qdev_get_machine());
132     S390IPLState *ipl = S390_IPL(dev);
133     uint32_t *ipl_psw;
134     uint64_t pentry;
135     char *magic;
136     int kernel_size;
137 
138     int bios_size;
139     char *bios_filename;
140 
141     /*
142      * Always load the bios if it was enforced,
143      * even if an external kernel has been defined.
144      */
145     if (!ipl->kernel || ipl->enforce_bios) {
146         uint64_t fwbase = (MIN(ms->ram_size, 0x80000000U) - 0x200000) & ~0xffffUL;
147 
148         bios_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, ipl->firmware);
149         if (bios_filename == NULL) {
150             error_setg(errp, "could not find stage1 bootloader");
151             return;
152         }
153 
154         bios_size = load_elf(bios_filename, NULL,
155                              bios_translate_addr, &fwbase,
156                              &ipl->bios_start_addr, NULL, NULL, NULL, 1,
157                              EM_S390, 0, 0);
158         if (bios_size > 0) {
159             /* Adjust ELF start address to final location */
160             ipl->bios_start_addr += fwbase;
161         } else {
162             /* Try to load non-ELF file */
163             bios_size = load_image_targphys(bios_filename, ZIPL_IMAGE_START,
164                                             4096);
165             ipl->bios_start_addr = ZIPL_IMAGE_START;
166         }
167         g_free(bios_filename);
168 
169         if (bios_size == -1) {
170             error_setg(errp, "could not load bootloader '%s'", ipl->firmware);
171             return;
172         }
173 
174         /* default boot target is the bios */
175         ipl->start_addr = ipl->bios_start_addr;
176     }
177 
178     if (ipl->kernel) {
179         kernel_size = load_elf(ipl->kernel, NULL, NULL, NULL,
180                                &pentry, NULL,
181                                NULL, NULL, 1, EM_S390, 0, 0);
182         if (kernel_size < 0) {
183             kernel_size = load_image_targphys(ipl->kernel, 0, ms->ram_size);
184             if (kernel_size < 0) {
185                 error_setg(errp, "could not load kernel '%s'", ipl->kernel);
186                 return;
187             }
188             /* if this is Linux use KERN_IMAGE_START */
189             magic = rom_ptr(LINUX_MAGIC_ADDR, 6);
190             if (magic && !memcmp(magic, "S390EP", 6)) {
191                 pentry = KERN_IMAGE_START;
192             } else {
193                 /* if not Linux load the address of the (short) IPL PSW */
194                 ipl_psw = rom_ptr(4, 4);
195                 if (ipl_psw) {
196                     pentry = be32_to_cpu(*ipl_psw) & PSW_MASK_SHORT_ADDR;
197                 } else {
198                     error_setg(errp, "Could not get IPL PSW");
199                     return;
200                 }
201             }
202         }
203         /*
204          * Is it a Linux kernel (starting at 0x10000)? If yes, we fill in the
205          * kernel parameters here as well. Note: For old kernels (up to 3.2)
206          * we can not rely on the ELF entry point - it was 0x800 (the SALIPL
207          * loader) and it won't work. For this case we force it to 0x10000, too.
208          */
209         if (pentry == KERN_IMAGE_START || pentry == 0x800) {
210             size_t cmdline_size = strlen(ipl->cmdline) + 1;
211             char *parm_area = rom_ptr(KERN_PARM_AREA, cmdline_size);
212 
213             ipl->start_addr = KERN_IMAGE_START;
214             /* Overwrite parameters in the kernel image, which are "rom" */
215             if (parm_area) {
216                 uint64_t max_cmdline_size = get_max_kernel_cmdline_size();
217 
218                 if (cmdline_size > max_cmdline_size) {
219                     error_setg(errp,
220                                "kernel command line exceeds maximum size:"
221                                " %zu > %" PRIu64,
222                                cmdline_size, max_cmdline_size);
223                     return;
224                 }
225 
226                 strcpy(parm_area, ipl->cmdline);
227             }
228         } else {
229             ipl->start_addr = pentry;
230         }
231 
232         if (ipl->initrd) {
233             ram_addr_t initrd_offset;
234             int initrd_size;
235             uint64_t *romptr;
236 
237             initrd_offset = INITRD_START;
238             while (kernel_size + 0x100000 > initrd_offset) {
239                 initrd_offset += 0x100000;
240             }
241             initrd_size = load_image_targphys(ipl->initrd, initrd_offset,
242                                               ms->ram_size - initrd_offset);
243             if (initrd_size == -1) {
244                 error_setg(errp, "could not load initrd '%s'", ipl->initrd);
245                 return;
246             }
247 
248             /*
249              * we have to overwrite values in the kernel image,
250              * which are "rom"
251              */
252             romptr = rom_ptr(INITRD_PARM_START, 16);
253             if (romptr) {
254                 stq_p(romptr, initrd_offset);
255                 stq_p(romptr + 1, initrd_size);
256             }
257         }
258     }
259     /*
260      * Don't ever use the migrated values, they could come from a different
261      * BIOS and therefore don't work. But still migrate the values, so
262      * QEMUs relying on it don't break.
263      */
264     ipl->compat_start_addr = ipl->start_addr;
265     ipl->compat_bios_start_addr = ipl->bios_start_addr;
266     /*
267      * Because this Device is not on any bus in the qbus tree (it is
268      * not a sysbus device and it's not on some other bus like a PCI
269      * bus) it will not be automatically reset by the 'reset the
270      * sysbus' hook registered by vl.c like most devices. So we must
271      * manually register a reset hook for it.
272      * TODO: there should be a better way to do this.
273      */
274     qemu_register_reset(resettable_cold_reset_fn, dev);
275 }
276 
277 static Property s390_ipl_properties[] = {
278     DEFINE_PROP_STRING("kernel", S390IPLState, kernel),
279     DEFINE_PROP_STRING("initrd", S390IPLState, initrd),
280     DEFINE_PROP_STRING("cmdline", S390IPLState, cmdline),
281     DEFINE_PROP_STRING("firmware", S390IPLState, firmware),
282     DEFINE_PROP_STRING("netboot_fw", S390IPLState, netboot_fw),
283     DEFINE_PROP_BOOL("enforce_bios", S390IPLState, enforce_bios, false),
284     DEFINE_PROP_BOOL("iplbext_migration", S390IPLState, iplbext_migration,
285                      true),
286     DEFINE_PROP_END_OF_LIST(),
287 };
288 
289 static void s390_ipl_set_boot_menu(S390IPLState *ipl)
290 {
291     QemuOptsList *plist = qemu_find_opts("boot-opts");
292     QemuOpts *opts = QTAILQ_FIRST(&plist->head);
293     const char *tmp;
294     unsigned long splash_time = 0;
295 
296     if (!get_boot_device(0)) {
297         if (boot_menu) {
298             error_report("boot menu requires a bootindex to be specified for "
299                          "the IPL device");
300         }
301         return;
302     }
303 
304     switch (ipl->iplb.pbt) {
305     case S390_IPL_TYPE_CCW:
306         /* In the absence of -boot menu, use zipl parameters */
307         if (!qemu_opt_get(opts, "menu")) {
308             ipl->qipl.qipl_flags |= QIPL_FLAG_BM_OPTS_ZIPL;
309             return;
310         }
311         break;
312     case S390_IPL_TYPE_QEMU_SCSI:
313         break;
314     default:
315         if (boot_menu) {
316             error_report("boot menu is not supported for this device type");
317         }
318         return;
319     }
320 
321     if (!boot_menu) {
322         return;
323     }
324 
325     ipl->qipl.qipl_flags |= QIPL_FLAG_BM_OPTS_CMD;
326 
327     tmp = qemu_opt_get(opts, "splash-time");
328 
329     if (tmp && qemu_strtoul(tmp, NULL, 10, &splash_time)) {
330         error_report("splash-time is invalid, forcing it to 0");
331         ipl->qipl.boot_menu_timeout = 0;
332         return;
333     }
334 
335     if (splash_time > 0xffffffff) {
336         error_report("splash-time is too large, forcing it to max value");
337         ipl->qipl.boot_menu_timeout = 0xffffffff;
338         return;
339     }
340 
341     ipl->qipl.boot_menu_timeout = cpu_to_be32(splash_time);
342 }
343 
344 #define CCW_DEVTYPE_NONE        0x00
345 #define CCW_DEVTYPE_VIRTIO      0x01
346 #define CCW_DEVTYPE_VIRTIO_NET  0x02
347 #define CCW_DEVTYPE_SCSI        0x03
348 #define CCW_DEVTYPE_VFIO        0x04
349 
350 static CcwDevice *s390_get_ccw_device(DeviceState *dev_st, int *devtype)
351 {
352     CcwDevice *ccw_dev = NULL;
353     int tmp_dt = CCW_DEVTYPE_NONE;
354 
355     if (dev_st) {
356         VirtIONet *virtio_net_dev = (VirtIONet *)
357             object_dynamic_cast(OBJECT(dev_st), TYPE_VIRTIO_NET);
358         VirtioCcwDevice *virtio_ccw_dev = (VirtioCcwDevice *)
359             object_dynamic_cast(OBJECT(qdev_get_parent_bus(dev_st)->parent),
360                                 TYPE_VIRTIO_CCW_DEVICE);
361         VFIOCCWDevice *vfio_ccw_dev = (VFIOCCWDevice *)
362             object_dynamic_cast(OBJECT(dev_st), TYPE_VFIO_CCW);
363 
364         if (virtio_ccw_dev) {
365             ccw_dev = CCW_DEVICE(virtio_ccw_dev);
366             if (virtio_net_dev) {
367                 tmp_dt = CCW_DEVTYPE_VIRTIO_NET;
368             } else {
369                 tmp_dt = CCW_DEVTYPE_VIRTIO;
370             }
371         } else if (vfio_ccw_dev) {
372             ccw_dev = CCW_DEVICE(vfio_ccw_dev);
373             tmp_dt = CCW_DEVTYPE_VFIO;
374         } else {
375             SCSIDevice *sd = (SCSIDevice *)
376                 object_dynamic_cast(OBJECT(dev_st),
377                                     TYPE_SCSI_DEVICE);
378             if (sd) {
379                 SCSIBus *bus = scsi_bus_from_device(sd);
380                 VirtIOSCSI *vdev = container_of(bus, VirtIOSCSI, bus);
381                 VirtIOSCSICcw *scsi_ccw = container_of(vdev, VirtIOSCSICcw,
382                                                        vdev);
383 
384                 ccw_dev = (CcwDevice *)object_dynamic_cast(OBJECT(scsi_ccw),
385                                                            TYPE_CCW_DEVICE);
386                 tmp_dt = CCW_DEVTYPE_SCSI;
387             }
388         }
389     }
390     if (devtype) {
391         *devtype = tmp_dt;
392     }
393     return ccw_dev;
394 }
395 
396 static bool s390_gen_initial_iplb(S390IPLState *ipl)
397 {
398     DeviceState *dev_st;
399     CcwDevice *ccw_dev = NULL;
400     SCSIDevice *sd;
401     int devtype;
402 
403     dev_st = get_boot_device(0);
404     if (dev_st) {
405         ccw_dev = s390_get_ccw_device(dev_st, &devtype);
406     }
407 
408     /*
409      * Currently allow IPL only from CCW devices.
410      */
411     if (ccw_dev) {
412         switch (devtype) {
413         case CCW_DEVTYPE_SCSI:
414             sd = SCSI_DEVICE(dev_st);
415             ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_QEMU_SCSI_LEN);
416             ipl->iplb.blk0_len =
417                 cpu_to_be32(S390_IPLB_MIN_QEMU_SCSI_LEN - S390_IPLB_HEADER_LEN);
418             ipl->iplb.pbt = S390_IPL_TYPE_QEMU_SCSI;
419             ipl->iplb.scsi.lun = cpu_to_be32(sd->lun);
420             ipl->iplb.scsi.target = cpu_to_be16(sd->id);
421             ipl->iplb.scsi.channel = cpu_to_be16(sd->channel);
422             ipl->iplb.scsi.devno = cpu_to_be16(ccw_dev->sch->devno);
423             ipl->iplb.scsi.ssid = ccw_dev->sch->ssid & 3;
424             break;
425         case CCW_DEVTYPE_VFIO:
426             ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_CCW_LEN);
427             ipl->iplb.pbt = S390_IPL_TYPE_CCW;
428             ipl->iplb.ccw.devno = cpu_to_be16(ccw_dev->sch->devno);
429             ipl->iplb.ccw.ssid = ccw_dev->sch->ssid & 3;
430             break;
431         case CCW_DEVTYPE_VIRTIO_NET:
432             ipl->netboot = true;
433             /* Fall through to CCW_DEVTYPE_VIRTIO case */
434         case CCW_DEVTYPE_VIRTIO:
435             ipl->iplb.len = cpu_to_be32(S390_IPLB_MIN_CCW_LEN);
436             ipl->iplb.blk0_len =
437                 cpu_to_be32(S390_IPLB_MIN_CCW_LEN - S390_IPLB_HEADER_LEN);
438             ipl->iplb.pbt = S390_IPL_TYPE_CCW;
439             ipl->iplb.ccw.devno = cpu_to_be16(ccw_dev->sch->devno);
440             ipl->iplb.ccw.ssid = ccw_dev->sch->ssid & 3;
441             break;
442         }
443 
444         if (!s390_ipl_set_loadparm(ipl->iplb.loadparm)) {
445             ipl->iplb.flags |= DIAG308_FLAGS_LP_VALID;
446         }
447 
448         return true;
449     }
450 
451     return false;
452 }
453 
454 int s390_ipl_set_loadparm(uint8_t *loadparm)
455 {
456     MachineState *machine = MACHINE(qdev_get_machine());
457     char *lp = object_property_get_str(OBJECT(machine), "loadparm", NULL);
458 
459     if (lp) {
460         int i;
461 
462         /* lp is an uppercase string without leading/embedded spaces */
463         for (i = 0; i < 8 && lp[i]; i++) {
464             loadparm[i] = ascii2ebcdic[(uint8_t) lp[i]];
465         }
466 
467         if (i < 8) {
468             memset(loadparm + i, 0x40, 8 - i); /* fill with EBCDIC spaces */
469         }
470 
471         g_free(lp);
472         return 0;
473     }
474 
475     return -1;
476 }
477 
478 static int load_netboot_image(Error **errp)
479 {
480     MachineState *ms = MACHINE(qdev_get_machine());
481     S390IPLState *ipl = get_ipl_device();
482     char *netboot_filename;
483     MemoryRegion *sysmem =  get_system_memory();
484     MemoryRegion *mr = NULL;
485     void *ram_ptr = NULL;
486     int img_size = -1;
487 
488     mr = memory_region_find(sysmem, 0, 1).mr;
489     if (!mr) {
490         error_setg(errp, "Failed to find memory region at address 0");
491         return -1;
492     }
493 
494     ram_ptr = memory_region_get_ram_ptr(mr);
495     if (!ram_ptr) {
496         error_setg(errp, "No RAM found");
497         goto unref_mr;
498     }
499 
500     netboot_filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, ipl->netboot_fw);
501     if (netboot_filename == NULL) {
502         error_setg(errp, "Could not find network bootloader '%s'",
503                    ipl->netboot_fw);
504         goto unref_mr;
505     }
506 
507     img_size = load_elf_ram(netboot_filename, NULL, NULL, NULL,
508                             &ipl->start_addr,
509                             NULL, NULL, NULL, 1, EM_S390, 0, 0, NULL,
510                             false);
511 
512     if (img_size < 0) {
513         img_size = load_image_size(netboot_filename, ram_ptr, ms->ram_size);
514         ipl->start_addr = KERN_IMAGE_START;
515     }
516 
517     if (img_size < 0) {
518         error_setg(errp, "Failed to load network bootloader");
519     }
520 
521     g_free(netboot_filename);
522 
523 unref_mr:
524     memory_region_unref(mr);
525     return img_size;
526 }
527 
528 static bool is_virtio_ccw_device_of_type(IplParameterBlock *iplb,
529                                          int virtio_id)
530 {
531     uint8_t cssid;
532     uint8_t ssid;
533     uint16_t devno;
534     uint16_t schid;
535     SubchDev *sch = NULL;
536 
537     if (iplb->pbt != S390_IPL_TYPE_CCW) {
538         return false;
539     }
540 
541     devno = be16_to_cpu(iplb->ccw.devno);
542     ssid = iplb->ccw.ssid & 3;
543 
544     for (schid = 0; schid < MAX_SCHID; schid++) {
545         for (cssid = 0; cssid < MAX_CSSID; cssid++) {
546             sch = css_find_subch(1, cssid, ssid, schid);
547 
548             if (sch && sch->devno == devno) {
549                 return sch->id.cu_model == virtio_id;
550             }
551         }
552     }
553     return false;
554 }
555 
556 static bool is_virtio_net_device(IplParameterBlock *iplb)
557 {
558     return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_NET);
559 }
560 
561 static bool is_virtio_scsi_device(IplParameterBlock *iplb)
562 {
563     return is_virtio_ccw_device_of_type(iplb, VIRTIO_ID_SCSI);
564 }
565 
566 static void update_machine_ipl_properties(IplParameterBlock *iplb)
567 {
568     Object *machine = qdev_get_machine();
569     Error *err = NULL;
570 
571     /* Sync loadparm */
572     if (iplb->flags & DIAG308_FLAGS_LP_VALID) {
573         uint8_t *ebcdic_loadparm = iplb->loadparm;
574         char ascii_loadparm[9];
575         int i;
576 
577         for (i = 0; i < 8 && ebcdic_loadparm[i]; i++) {
578             ascii_loadparm[i] = ebcdic2ascii[(uint8_t) ebcdic_loadparm[i]];
579         }
580         ascii_loadparm[i] = 0;
581         object_property_set_str(machine, "loadparm", ascii_loadparm, &err);
582     } else {
583         object_property_set_str(machine, "loadparm", "", &err);
584     }
585     if (err) {
586         warn_report_err(err);
587     }
588 }
589 
590 void s390_ipl_update_diag308(IplParameterBlock *iplb)
591 {
592     S390IPLState *ipl = get_ipl_device();
593 
594     /*
595      * The IPLB set and retrieved by subcodes 8/9 is completely
596      * separate from the one managed via subcodes 5/6.
597      */
598     if (iplb->pbt == S390_IPL_TYPE_PV) {
599         ipl->iplb_pv = *iplb;
600         ipl->iplb_valid_pv = true;
601     } else {
602         ipl->iplb = *iplb;
603         ipl->iplb_valid = true;
604     }
605     ipl->netboot = is_virtio_net_device(iplb);
606     update_machine_ipl_properties(iplb);
607 }
608 
609 IplParameterBlock *s390_ipl_get_iplb_pv(void)
610 {
611     S390IPLState *ipl = get_ipl_device();
612 
613     if (!ipl->iplb_valid_pv) {
614         return NULL;
615     }
616     return &ipl->iplb_pv;
617 }
618 
619 IplParameterBlock *s390_ipl_get_iplb(void)
620 {
621     S390IPLState *ipl = get_ipl_device();
622 
623     if (!ipl->iplb_valid) {
624         return NULL;
625     }
626     return &ipl->iplb;
627 }
628 
629 void s390_ipl_reset_request(CPUState *cs, enum s390_reset reset_type)
630 {
631     S390IPLState *ipl = get_ipl_device();
632 
633     if (reset_type == S390_RESET_EXTERNAL || reset_type == S390_RESET_REIPL) {
634         /* use CPU 0 for full resets */
635         ipl->reset_cpu_index = 0;
636     } else {
637         ipl->reset_cpu_index = cs->cpu_index;
638     }
639     ipl->reset_type = reset_type;
640 
641     if (reset_type == S390_RESET_REIPL &&
642         ipl->iplb_valid &&
643         !ipl->netboot &&
644         ipl->iplb.pbt == S390_IPL_TYPE_CCW &&
645         is_virtio_scsi_device(&ipl->iplb)) {
646         CcwDevice *ccw_dev = s390_get_ccw_device(get_boot_device(0), NULL);
647 
648         if (ccw_dev &&
649             cpu_to_be16(ccw_dev->sch->devno) == ipl->iplb.ccw.devno &&
650             (ccw_dev->sch->ssid & 3) == ipl->iplb.ccw.ssid) {
651             /*
652              * this is the original boot device's SCSI
653              * so restore IPL parameter info from it
654              */
655             ipl->iplb_valid = s390_gen_initial_iplb(ipl);
656         }
657     }
658     if (reset_type == S390_RESET_MODIFIED_CLEAR ||
659         reset_type == S390_RESET_LOAD_NORMAL ||
660         reset_type == S390_RESET_PV) {
661         /* ignore -no-reboot, send no event  */
662         qemu_system_reset_request(SHUTDOWN_CAUSE_SUBSYSTEM_RESET);
663     } else {
664         qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
665     }
666     /* as this is triggered by a CPU, make sure to exit the loop */
667     if (tcg_enabled()) {
668         cpu_loop_exit(cs);
669     }
670 }
671 
672 void s390_ipl_get_reset_request(CPUState **cs, enum s390_reset *reset_type)
673 {
674     S390IPLState *ipl = get_ipl_device();
675 
676     *cs = qemu_get_cpu(ipl->reset_cpu_index);
677     if (!*cs) {
678         /* use any CPU */
679         *cs = first_cpu;
680     }
681     *reset_type = ipl->reset_type;
682 }
683 
684 void s390_ipl_clear_reset_request(void)
685 {
686     S390IPLState *ipl = get_ipl_device();
687 
688     ipl->reset_type = S390_RESET_EXTERNAL;
689     /* use CPU 0 for full resets */
690     ipl->reset_cpu_index = 0;
691 }
692 
693 static void s390_ipl_prepare_qipl(S390CPU *cpu)
694 {
695     S390IPLState *ipl = get_ipl_device();
696     uint8_t *addr;
697     uint64_t len = 4096;
698 
699     addr = cpu_physical_memory_map(cpu->env.psa, &len, true);
700     if (!addr || len < QIPL_ADDRESS + sizeof(QemuIplParameters)) {
701         error_report("Cannot set QEMU IPL parameters");
702         return;
703     }
704     memcpy(addr + QIPL_ADDRESS, &ipl->qipl, sizeof(QemuIplParameters));
705     cpu_physical_memory_unmap(addr, len, 1, len);
706 }
707 
708 int s390_ipl_prepare_pv_header(void)
709 {
710     IplParameterBlock *ipib = s390_ipl_get_iplb_pv();
711     IPLBlockPV *ipib_pv = &ipib->pv;
712     void *hdr = g_malloc(ipib_pv->pv_header_len);
713     int rc;
714 
715     cpu_physical_memory_read(ipib_pv->pv_header_addr, hdr,
716                              ipib_pv->pv_header_len);
717     rc = s390_pv_set_sec_parms((uintptr_t)hdr,
718                                ipib_pv->pv_header_len);
719     g_free(hdr);
720     return rc;
721 }
722 
723 int s390_ipl_pv_unpack(void)
724 {
725     IplParameterBlock *ipib = s390_ipl_get_iplb_pv();
726     IPLBlockPV *ipib_pv = &ipib->pv;
727     int i, rc = 0;
728 
729     for (i = 0; i < ipib_pv->num_comp; i++) {
730         rc = s390_pv_unpack(ipib_pv->components[i].addr,
731                             TARGET_PAGE_ALIGN(ipib_pv->components[i].size),
732                             ipib_pv->components[i].tweak_pref);
733         if (rc) {
734             break;
735         }
736     }
737     return rc;
738 }
739 
740 void s390_ipl_prepare_cpu(S390CPU *cpu)
741 {
742     S390IPLState *ipl = get_ipl_device();
743 
744     cpu->env.psw.addr = ipl->start_addr;
745     cpu->env.psw.mask = IPL_PSW_MASK;
746 
747     if (!ipl->kernel || ipl->iplb_valid) {
748         cpu->env.psw.addr = ipl->bios_start_addr;
749         if (!ipl->iplb_valid) {
750             ipl->iplb_valid = s390_gen_initial_iplb(ipl);
751         }
752     }
753     if (ipl->netboot) {
754         load_netboot_image(&error_fatal);
755         ipl->qipl.netboot_start_addr = cpu_to_be64(ipl->start_addr);
756     }
757     s390_ipl_set_boot_menu(ipl);
758     s390_ipl_prepare_qipl(cpu);
759 }
760 
761 static void s390_ipl_reset(DeviceState *dev)
762 {
763     S390IPLState *ipl = S390_IPL(dev);
764 
765     if (ipl->reset_type != S390_RESET_REIPL) {
766         ipl->iplb_valid = false;
767         memset(&ipl->iplb, 0, sizeof(IplParameterBlock));
768     }
769 }
770 
771 static void s390_ipl_class_init(ObjectClass *klass, void *data)
772 {
773     DeviceClass *dc = DEVICE_CLASS(klass);
774 
775     dc->realize = s390_ipl_realize;
776     device_class_set_props(dc, s390_ipl_properties);
777     dc->reset = s390_ipl_reset;
778     dc->vmsd = &vmstate_ipl;
779     set_bit(DEVICE_CATEGORY_MISC, dc->categories);
780     /* Reason: Loads the ROMs and thus can only be used one time - internally */
781     dc->user_creatable = false;
782 }
783 
784 static const TypeInfo s390_ipl_info = {
785     .class_init = s390_ipl_class_init,
786     .parent = TYPE_DEVICE,
787     .name  = TYPE_S390_IPL,
788     .instance_size  = sizeof(S390IPLState),
789 };
790 
791 static void s390_ipl_register_types(void)
792 {
793     type_register_static(&s390_ipl_info);
794 }
795 
796 type_init(s390_ipl_register_types)
797