1 /* 2 * QEMU RISC-V VirtIO Board 3 * 4 * Copyright (c) 2017 SiFive, Inc. 5 * 6 * RISC-V machine with 16550a UART and VirtIO MMIO 7 * 8 * This program is free software; you can redistribute it and/or modify it 9 * under the terms and conditions of the GNU General Public License, 10 * version 2 or later, as published by the Free Software Foundation. 11 * 12 * This program is distributed in the hope it will be useful, but WITHOUT 13 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 14 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 15 * more details. 16 * 17 * You should have received a copy of the GNU General Public License along with 18 * this program. If not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qemu/units.h" 23 #include "qemu/log.h" 24 #include "qemu/error-report.h" 25 #include "qapi/error.h" 26 #include "hw/hw.h" 27 #include "hw/boards.h" 28 #include "hw/loader.h" 29 #include "hw/sysbus.h" 30 #include "hw/char/serial.h" 31 #include "target/riscv/cpu.h" 32 #include "hw/riscv/riscv_htif.h" 33 #include "hw/riscv/riscv_hart.h" 34 #include "hw/riscv/sifive_plic.h" 35 #include "hw/riscv/sifive_clint.h" 36 #include "hw/riscv/sifive_test.h" 37 #include "hw/riscv/virt.h" 38 #include "chardev/char.h" 39 #include "sysemu/arch_init.h" 40 #include "sysemu/device_tree.h" 41 #include "exec/address-spaces.h" 42 #include "elf.h" 43 44 #include <libfdt.h> 45 46 static const struct MemmapEntry { 47 hwaddr base; 48 hwaddr size; 49 } virt_memmap[] = { 50 [VIRT_DEBUG] = { 0x0, 0x100 }, 51 [VIRT_MROM] = { 0x1000, 0x11000 }, 52 [VIRT_TEST] = { 0x100000, 0x1000 }, 53 [VIRT_CLINT] = { 0x2000000, 0x10000 }, 54 [VIRT_PLIC] = { 0xc000000, 0x4000000 }, 55 [VIRT_UART0] = { 0x10000000, 0x100 }, 56 [VIRT_VIRTIO] = { 0x10001000, 0x1000 }, 57 [VIRT_DRAM] = { 0x80000000, 0x0 }, 58 }; 59 60 static uint64_t load_kernel(const char *kernel_filename) 61 { 62 uint64_t kernel_entry, kernel_high; 63 64 if (load_elf(kernel_filename, NULL, NULL, 65 &kernel_entry, NULL, &kernel_high, 66 0, EM_RISCV, 1, 0) < 0) { 67 error_report("could not load kernel '%s'", kernel_filename); 68 exit(1); 69 } 70 return kernel_entry; 71 } 72 73 static hwaddr load_initrd(const char *filename, uint64_t mem_size, 74 uint64_t kernel_entry, hwaddr *start) 75 { 76 int size; 77 78 /* We want to put the initrd far enough into RAM that when the 79 * kernel is uncompressed it will not clobber the initrd. However 80 * on boards without much RAM we must ensure that we still leave 81 * enough room for a decent sized initrd, and on boards with large 82 * amounts of RAM we must avoid the initrd being so far up in RAM 83 * that it is outside lowmem and inaccessible to the kernel. 84 * So for boards with less than 256MB of RAM we put the initrd 85 * halfway into RAM, and for boards with 256MB of RAM or more we put 86 * the initrd at 128MB. 87 */ 88 *start = kernel_entry + MIN(mem_size / 2, 128 * MiB); 89 90 size = load_ramdisk(filename, *start, mem_size - *start); 91 if (size == -1) { 92 size = load_image_targphys(filename, *start, mem_size - *start); 93 if (size == -1) { 94 error_report("could not load ramdisk '%s'", filename); 95 exit(1); 96 } 97 } 98 return *start + size; 99 } 100 101 static void *create_fdt(RISCVVirtState *s, const struct MemmapEntry *memmap, 102 uint64_t mem_size, const char *cmdline) 103 { 104 void *fdt; 105 int cpu; 106 uint32_t *cells; 107 char *nodename; 108 uint32_t plic_phandle, phandle = 1; 109 int i; 110 111 fdt = s->fdt = create_device_tree(&s->fdt_size); 112 if (!fdt) { 113 error_report("create_device_tree() failed"); 114 exit(1); 115 } 116 117 qemu_fdt_setprop_string(fdt, "/", "model", "riscv-virtio,qemu"); 118 qemu_fdt_setprop_string(fdt, "/", "compatible", "riscv-virtio"); 119 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); 120 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); 121 122 qemu_fdt_add_subnode(fdt, "/soc"); 123 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); 124 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); 125 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); 126 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); 127 128 nodename = g_strdup_printf("/memory@%lx", 129 (long)memmap[VIRT_DRAM].base); 130 qemu_fdt_add_subnode(fdt, nodename); 131 qemu_fdt_setprop_cells(fdt, nodename, "reg", 132 memmap[VIRT_DRAM].base >> 32, memmap[VIRT_DRAM].base, 133 mem_size >> 32, mem_size); 134 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 135 g_free(nodename); 136 137 qemu_fdt_add_subnode(fdt, "/cpus"); 138 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 139 SIFIVE_CLINT_TIMEBASE_FREQ); 140 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); 141 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); 142 143 for (cpu = s->soc.num_harts - 1; cpu >= 0; cpu--) { 144 int cpu_phandle = phandle++; 145 nodename = g_strdup_printf("/cpus/cpu@%d", cpu); 146 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 147 char *isa = riscv_isa_string(&s->soc.harts[cpu]); 148 qemu_fdt_add_subnode(fdt, nodename); 149 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 150 VIRT_CLOCK_FREQ); 151 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); 152 qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); 153 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); 154 qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); 155 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); 156 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); 157 qemu_fdt_add_subnode(fdt, intc); 158 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); 159 qemu_fdt_setprop_cell(fdt, intc, "linux,phandle", cpu_phandle); 160 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); 161 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); 162 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); 163 g_free(isa); 164 g_free(intc); 165 g_free(nodename); 166 } 167 168 cells = g_new0(uint32_t, s->soc.num_harts * 4); 169 for (cpu = 0; cpu < s->soc.num_harts; cpu++) { 170 nodename = 171 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 172 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 173 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 174 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); 175 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); 176 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); 177 g_free(nodename); 178 } 179 nodename = g_strdup_printf("/soc/clint@%lx", 180 (long)memmap[VIRT_CLINT].base); 181 qemu_fdt_add_subnode(fdt, nodename); 182 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); 183 qemu_fdt_setprop_cells(fdt, nodename, "reg", 184 0x0, memmap[VIRT_CLINT].base, 185 0x0, memmap[VIRT_CLINT].size); 186 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 187 cells, s->soc.num_harts * sizeof(uint32_t) * 4); 188 g_free(cells); 189 g_free(nodename); 190 191 plic_phandle = phandle++; 192 cells = g_new0(uint32_t, s->soc.num_harts * 4); 193 for (cpu = 0; cpu < s->soc.num_harts; cpu++) { 194 nodename = 195 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 196 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 197 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 198 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_EXT); 199 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); 200 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_S_EXT); 201 g_free(nodename); 202 } 203 nodename = g_strdup_printf("/soc/interrupt-controller@%lx", 204 (long)memmap[VIRT_PLIC].base); 205 qemu_fdt_add_subnode(fdt, nodename); 206 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); 207 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); 208 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 209 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 210 cells, s->soc.num_harts * sizeof(uint32_t) * 4); 211 qemu_fdt_setprop_cells(fdt, nodename, "reg", 212 0x0, memmap[VIRT_PLIC].base, 213 0x0, memmap[VIRT_PLIC].size); 214 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); 215 qemu_fdt_setprop_cell(fdt, nodename, "riscv,max-priority", 7); 216 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", VIRTIO_NDEV); 217 qemu_fdt_setprop_cells(fdt, nodename, "phandle", plic_phandle); 218 qemu_fdt_setprop_cells(fdt, nodename, "linux,phandle", plic_phandle); 219 plic_phandle = qemu_fdt_get_phandle(fdt, nodename); 220 g_free(cells); 221 g_free(nodename); 222 223 for (i = 0; i < VIRTIO_COUNT; i++) { 224 nodename = g_strdup_printf("/virtio_mmio@%lx", 225 (long)(memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size)); 226 qemu_fdt_add_subnode(fdt, nodename); 227 qemu_fdt_setprop_string(fdt, nodename, "compatible", "virtio,mmio"); 228 qemu_fdt_setprop_cells(fdt, nodename, "reg", 229 0x0, memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, 230 0x0, memmap[VIRT_VIRTIO].size); 231 qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); 232 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", VIRTIO_IRQ + i); 233 g_free(nodename); 234 } 235 236 nodename = g_strdup_printf("/test@%lx", 237 (long)memmap[VIRT_TEST].base); 238 qemu_fdt_add_subnode(fdt, nodename); 239 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,test0"); 240 qemu_fdt_setprop_cells(fdt, nodename, "reg", 241 0x0, memmap[VIRT_TEST].base, 242 0x0, memmap[VIRT_TEST].size); 243 244 nodename = g_strdup_printf("/uart@%lx", 245 (long)memmap[VIRT_UART0].base); 246 qemu_fdt_add_subnode(fdt, nodename); 247 qemu_fdt_setprop_string(fdt, nodename, "compatible", "ns16550a"); 248 qemu_fdt_setprop_cells(fdt, nodename, "reg", 249 0x0, memmap[VIRT_UART0].base, 250 0x0, memmap[VIRT_UART0].size); 251 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 3686400); 252 qemu_fdt_setprop_cells(fdt, nodename, "interrupt-parent", plic_phandle); 253 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", UART0_IRQ); 254 255 qemu_fdt_add_subnode(fdt, "/chosen"); 256 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); 257 if (cmdline) { 258 qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); 259 } 260 g_free(nodename); 261 262 return fdt; 263 } 264 265 static void riscv_virt_board_init(MachineState *machine) 266 { 267 const struct MemmapEntry *memmap = virt_memmap; 268 269 RISCVVirtState *s = g_new0(RISCVVirtState, 1); 270 MemoryRegion *system_memory = get_system_memory(); 271 MemoryRegion *main_mem = g_new(MemoryRegion, 1); 272 MemoryRegion *mask_rom = g_new(MemoryRegion, 1); 273 char *plic_hart_config; 274 size_t plic_hart_config_len; 275 int i; 276 void *fdt; 277 278 /* Initialize SOC */ 279 object_initialize_child(OBJECT(machine), "soc", &s->soc, sizeof(s->soc), 280 TYPE_RISCV_HART_ARRAY, &error_abort, NULL); 281 object_property_set_str(OBJECT(&s->soc), VIRT_CPU, "cpu-type", 282 &error_abort); 283 object_property_set_int(OBJECT(&s->soc), smp_cpus, "num-harts", 284 &error_abort); 285 object_property_set_bool(OBJECT(&s->soc), true, "realized", 286 &error_abort); 287 288 /* register system main memory (actual RAM) */ 289 memory_region_init_ram(main_mem, NULL, "riscv_virt_board.ram", 290 machine->ram_size, &error_fatal); 291 memory_region_add_subregion(system_memory, memmap[VIRT_DRAM].base, 292 main_mem); 293 294 /* create device tree */ 295 fdt = create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); 296 297 /* boot rom */ 298 memory_region_init_rom(mask_rom, NULL, "riscv_virt_board.mrom", 299 memmap[VIRT_MROM].size, &error_fatal); 300 memory_region_add_subregion(system_memory, memmap[VIRT_MROM].base, 301 mask_rom); 302 303 if (machine->kernel_filename) { 304 uint64_t kernel_entry = load_kernel(machine->kernel_filename); 305 306 if (machine->initrd_filename) { 307 hwaddr start; 308 hwaddr end = load_initrd(machine->initrd_filename, 309 machine->ram_size, kernel_entry, 310 &start); 311 qemu_fdt_setprop_cell(fdt, "/chosen", 312 "linux,initrd-start", start); 313 qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 314 end); 315 } 316 } 317 318 /* reset vector */ 319 uint32_t reset_vec[8] = { 320 0x00000297, /* 1: auipc t0, %pcrel_hi(dtb) */ 321 0x02028593, /* addi a1, t0, %pcrel_lo(1b) */ 322 0xf1402573, /* csrr a0, mhartid */ 323 #if defined(TARGET_RISCV32) 324 0x0182a283, /* lw t0, 24(t0) */ 325 #elif defined(TARGET_RISCV64) 326 0x0182b283, /* ld t0, 24(t0) */ 327 #endif 328 0x00028067, /* jr t0 */ 329 0x00000000, 330 memmap[VIRT_DRAM].base, /* start: .dword memmap[VIRT_DRAM].base */ 331 0x00000000, 332 /* dtb: */ 333 }; 334 335 /* copy in the reset vector in little_endian byte order */ 336 for (i = 0; i < sizeof(reset_vec) >> 2; i++) { 337 reset_vec[i] = cpu_to_le32(reset_vec[i]); 338 } 339 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 340 memmap[VIRT_MROM].base, &address_space_memory); 341 342 /* copy in the device tree */ 343 if (fdt_pack(s->fdt) || fdt_totalsize(s->fdt) > 344 memmap[VIRT_MROM].size - sizeof(reset_vec)) { 345 error_report("not enough space to store device-tree"); 346 exit(1); 347 } 348 qemu_fdt_dumpdtb(s->fdt, fdt_totalsize(s->fdt)); 349 rom_add_blob_fixed_as("mrom.fdt", s->fdt, fdt_totalsize(s->fdt), 350 memmap[VIRT_MROM].base + sizeof(reset_vec), 351 &address_space_memory); 352 353 /* create PLIC hart topology configuration string */ 354 plic_hart_config_len = (strlen(VIRT_PLIC_HART_CONFIG) + 1) * smp_cpus; 355 plic_hart_config = g_malloc0(plic_hart_config_len); 356 for (i = 0; i < smp_cpus; i++) { 357 if (i != 0) { 358 strncat(plic_hart_config, ",", plic_hart_config_len); 359 } 360 strncat(plic_hart_config, VIRT_PLIC_HART_CONFIG, plic_hart_config_len); 361 plic_hart_config_len -= (strlen(VIRT_PLIC_HART_CONFIG) + 1); 362 } 363 364 /* MMIO */ 365 s->plic = sifive_plic_create(memmap[VIRT_PLIC].base, 366 plic_hart_config, 367 VIRT_PLIC_NUM_SOURCES, 368 VIRT_PLIC_NUM_PRIORITIES, 369 VIRT_PLIC_PRIORITY_BASE, 370 VIRT_PLIC_PENDING_BASE, 371 VIRT_PLIC_ENABLE_BASE, 372 VIRT_PLIC_ENABLE_STRIDE, 373 VIRT_PLIC_CONTEXT_BASE, 374 VIRT_PLIC_CONTEXT_STRIDE, 375 memmap[VIRT_PLIC].size); 376 sifive_clint_create(memmap[VIRT_CLINT].base, 377 memmap[VIRT_CLINT].size, smp_cpus, 378 SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE); 379 sifive_test_create(memmap[VIRT_TEST].base); 380 381 for (i = 0; i < VIRTIO_COUNT; i++) { 382 sysbus_create_simple("virtio-mmio", 383 memmap[VIRT_VIRTIO].base + i * memmap[VIRT_VIRTIO].size, 384 qdev_get_gpio_in(DEVICE(s->plic), VIRTIO_IRQ + i)); 385 } 386 387 serial_mm_init(system_memory, memmap[VIRT_UART0].base, 388 0, qdev_get_gpio_in(DEVICE(s->plic), UART0_IRQ), 399193, 389 serial_hd(0), DEVICE_LITTLE_ENDIAN); 390 391 g_free(plic_hart_config); 392 } 393 394 static void riscv_virt_board_machine_init(MachineClass *mc) 395 { 396 mc->desc = "RISC-V VirtIO Board (Privileged ISA v1.10)"; 397 mc->init = riscv_virt_board_init; 398 mc->max_cpus = 8; /* hardcoded limit in BBL */ 399 } 400 401 DEFINE_MACHINE("virt", riscv_virt_board_machine_init) 402