1 /* 2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK 3 * 4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu 5 * Copyright (c) 2017 SiFive, Inc. 6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com> 7 * 8 * Provides a board compatible with the SiFive Freedom U SDK: 9 * 10 * 0) UART 11 * 1) CLINT (Core Level Interruptor) 12 * 2) PLIC (Platform Level Interrupt Controller) 13 * 3) PRCI (Power, Reset, Clock, Interrupt) 14 * 4) GPIO (General Purpose Input/Output Controller) 15 * 5) OTP (One-Time Programmable) memory with stored serial number 16 * 6) GEM (Gigabit Ethernet Controller) and management block 17 * 18 * This board currently generates devicetree dynamically that indicates at least 19 * two harts and up to five harts. 20 * 21 * This program is free software; you can redistribute it and/or modify it 22 * under the terms and conditions of the GNU General Public License, 23 * version 2 or later, as published by the Free Software Foundation. 24 * 25 * This program is distributed in the hope it will be useful, but WITHOUT 26 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 27 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 28 * more details. 29 * 30 * You should have received a copy of the GNU General Public License along with 31 * this program. If not, see <http://www.gnu.org/licenses/>. 32 */ 33 34 #include "qemu/osdep.h" 35 #include "qemu/log.h" 36 #include "qemu/error-report.h" 37 #include "qapi/error.h" 38 #include "qapi/visitor.h" 39 #include "hw/boards.h" 40 #include "hw/irq.h" 41 #include "hw/loader.h" 42 #include "hw/sysbus.h" 43 #include "hw/char/serial.h" 44 #include "hw/cpu/cluster.h" 45 #include "hw/misc/unimp.h" 46 #include "target/riscv/cpu.h" 47 #include "hw/riscv/riscv_hart.h" 48 #include "hw/riscv/sifive_plic.h" 49 #include "hw/riscv/sifive_clint.h" 50 #include "hw/riscv/sifive_uart.h" 51 #include "hw/riscv/sifive_u.h" 52 #include "hw/riscv/boot.h" 53 #include "chardev/char.h" 54 #include "net/eth.h" 55 #include "sysemu/arch_init.h" 56 #include "sysemu/device_tree.h" 57 #include "sysemu/runstate.h" 58 #include "sysemu/sysemu.h" 59 60 #include <libfdt.h> 61 62 #if defined(TARGET_RISCV32) 63 # define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin" 64 #else 65 # define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin" 66 #endif 67 68 static const struct MemmapEntry { 69 hwaddr base; 70 hwaddr size; 71 } sifive_u_memmap[] = { 72 [SIFIVE_U_DEBUG] = { 0x0, 0x100 }, 73 [SIFIVE_U_MROM] = { 0x1000, 0xf000 }, 74 [SIFIVE_U_CLINT] = { 0x2000000, 0x10000 }, 75 [SIFIVE_U_L2CC] = { 0x2010000, 0x1000 }, 76 [SIFIVE_U_L2LIM] = { 0x8000000, 0x2000000 }, 77 [SIFIVE_U_PLIC] = { 0xc000000, 0x4000000 }, 78 [SIFIVE_U_PRCI] = { 0x10000000, 0x1000 }, 79 [SIFIVE_U_UART0] = { 0x10010000, 0x1000 }, 80 [SIFIVE_U_UART1] = { 0x10011000, 0x1000 }, 81 [SIFIVE_U_GPIO] = { 0x10060000, 0x1000 }, 82 [SIFIVE_U_OTP] = { 0x10070000, 0x1000 }, 83 [SIFIVE_U_GEM] = { 0x10090000, 0x2000 }, 84 [SIFIVE_U_GEM_MGMT] = { 0x100a0000, 0x1000 }, 85 [SIFIVE_U_DMC] = { 0x100b0000, 0x10000 }, 86 [SIFIVE_U_FLASH0] = { 0x20000000, 0x10000000 }, 87 [SIFIVE_U_DRAM] = { 0x80000000, 0x0 }, 88 }; 89 90 #define OTP_SERIAL 1 91 #define GEM_REVISION 0x10070109 92 93 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, 94 uint64_t mem_size, const char *cmdline) 95 { 96 MachineState *ms = MACHINE(qdev_get_machine()); 97 void *fdt; 98 int cpu; 99 uint32_t *cells; 100 char *nodename; 101 char ethclk_names[] = "pclk\0hclk"; 102 uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; 103 uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; 104 105 fdt = s->fdt = create_device_tree(&s->fdt_size); 106 if (!fdt) { 107 error_report("create_device_tree() failed"); 108 exit(1); 109 } 110 111 qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00"); 112 qemu_fdt_setprop_string(fdt, "/", "compatible", 113 "sifive,hifive-unleashed-a00"); 114 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); 115 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); 116 117 qemu_fdt_add_subnode(fdt, "/soc"); 118 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); 119 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); 120 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); 121 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); 122 123 hfclk_phandle = phandle++; 124 nodename = g_strdup_printf("/hfclk"); 125 qemu_fdt_add_subnode(fdt, nodename); 126 qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle); 127 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk"); 128 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 129 SIFIVE_U_HFCLK_FREQ); 130 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 131 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 132 g_free(nodename); 133 134 rtcclk_phandle = phandle++; 135 nodename = g_strdup_printf("/rtcclk"); 136 qemu_fdt_add_subnode(fdt, nodename); 137 qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle); 138 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk"); 139 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 140 SIFIVE_U_RTCCLK_FREQ); 141 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 142 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 143 g_free(nodename); 144 145 nodename = g_strdup_printf("/memory@%lx", 146 (long)memmap[SIFIVE_U_DRAM].base); 147 qemu_fdt_add_subnode(fdt, nodename); 148 qemu_fdt_setprop_cells(fdt, nodename, "reg", 149 memmap[SIFIVE_U_DRAM].base >> 32, memmap[SIFIVE_U_DRAM].base, 150 mem_size >> 32, mem_size); 151 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 152 g_free(nodename); 153 154 qemu_fdt_add_subnode(fdt, "/cpus"); 155 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 156 SIFIVE_CLINT_TIMEBASE_FREQ); 157 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); 158 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); 159 160 for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) { 161 int cpu_phandle = phandle++; 162 nodename = g_strdup_printf("/cpus/cpu@%d", cpu); 163 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 164 char *isa; 165 qemu_fdt_add_subnode(fdt, nodename); 166 /* cpu 0 is the management hart that does not have mmu */ 167 if (cpu != 0) { 168 #if defined(TARGET_RISCV32) 169 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); 170 #else 171 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); 172 #endif 173 isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]); 174 } else { 175 isa = riscv_isa_string(&s->soc.e_cpus.harts[0]); 176 } 177 qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); 178 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); 179 qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); 180 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); 181 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); 182 qemu_fdt_add_subnode(fdt, intc); 183 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); 184 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); 185 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); 186 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); 187 g_free(isa); 188 g_free(intc); 189 g_free(nodename); 190 } 191 192 cells = g_new0(uint32_t, ms->smp.cpus * 4); 193 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 194 nodename = 195 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 196 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 197 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 198 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); 199 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); 200 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); 201 g_free(nodename); 202 } 203 nodename = g_strdup_printf("/soc/clint@%lx", 204 (long)memmap[SIFIVE_U_CLINT].base); 205 qemu_fdt_add_subnode(fdt, nodename); 206 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); 207 qemu_fdt_setprop_cells(fdt, nodename, "reg", 208 0x0, memmap[SIFIVE_U_CLINT].base, 209 0x0, memmap[SIFIVE_U_CLINT].size); 210 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 211 cells, ms->smp.cpus * sizeof(uint32_t) * 4); 212 g_free(cells); 213 g_free(nodename); 214 215 nodename = g_strdup_printf("/soc/otp@%lx", 216 (long)memmap[SIFIVE_U_OTP].base); 217 qemu_fdt_add_subnode(fdt, nodename); 218 qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE); 219 qemu_fdt_setprop_cells(fdt, nodename, "reg", 220 0x0, memmap[SIFIVE_U_OTP].base, 221 0x0, memmap[SIFIVE_U_OTP].size); 222 qemu_fdt_setprop_string(fdt, nodename, "compatible", 223 "sifive,fu540-c000-otp"); 224 g_free(nodename); 225 226 prci_phandle = phandle++; 227 nodename = g_strdup_printf("/soc/clock-controller@%lx", 228 (long)memmap[SIFIVE_U_PRCI].base); 229 qemu_fdt_add_subnode(fdt, nodename); 230 qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle); 231 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1); 232 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 233 hfclk_phandle, rtcclk_phandle); 234 qemu_fdt_setprop_cells(fdt, nodename, "reg", 235 0x0, memmap[SIFIVE_U_PRCI].base, 236 0x0, memmap[SIFIVE_U_PRCI].size); 237 qemu_fdt_setprop_string(fdt, nodename, "compatible", 238 "sifive,fu540-c000-prci"); 239 g_free(nodename); 240 241 plic_phandle = phandle++; 242 cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2); 243 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 244 nodename = 245 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 246 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 247 /* cpu 0 is the management hart that does not have S-mode */ 248 if (cpu == 0) { 249 cells[0] = cpu_to_be32(intc_phandle); 250 cells[1] = cpu_to_be32(IRQ_M_EXT); 251 } else { 252 cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle); 253 cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT); 254 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 255 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT); 256 } 257 g_free(nodename); 258 } 259 nodename = g_strdup_printf("/soc/interrupt-controller@%lx", 260 (long)memmap[SIFIVE_U_PLIC].base); 261 qemu_fdt_add_subnode(fdt, nodename); 262 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); 263 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); 264 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 265 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 266 cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t)); 267 qemu_fdt_setprop_cells(fdt, nodename, "reg", 268 0x0, memmap[SIFIVE_U_PLIC].base, 269 0x0, memmap[SIFIVE_U_PLIC].size); 270 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35); 271 qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); 272 plic_phandle = qemu_fdt_get_phandle(fdt, nodename); 273 g_free(cells); 274 g_free(nodename); 275 276 gpio_phandle = phandle++; 277 nodename = g_strdup_printf("/soc/gpio@%lx", 278 (long)memmap[SIFIVE_U_GPIO].base); 279 qemu_fdt_add_subnode(fdt, nodename); 280 qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle); 281 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 282 prci_phandle, PRCI_CLK_TLCLK); 283 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2); 284 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 285 qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2); 286 qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0); 287 qemu_fdt_setprop_cells(fdt, nodename, "reg", 288 0x0, memmap[SIFIVE_U_GPIO].base, 289 0x0, memmap[SIFIVE_U_GPIO].size); 290 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0, 291 SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3, 292 SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6, 293 SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9, 294 SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12, 295 SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15); 296 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 297 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0"); 298 g_free(nodename); 299 300 nodename = g_strdup_printf("/gpio-restart"); 301 qemu_fdt_add_subnode(fdt, nodename); 302 qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1); 303 qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart"); 304 g_free(nodename); 305 306 nodename = g_strdup_printf("/soc/cache-controller@%lx", 307 (long)memmap[SIFIVE_U_L2CC].base); 308 qemu_fdt_add_subnode(fdt, nodename); 309 qemu_fdt_setprop_cells(fdt, nodename, "reg", 310 0x0, memmap[SIFIVE_U_L2CC].base, 311 0x0, memmap[SIFIVE_U_L2CC].size); 312 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 313 SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2); 314 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 315 qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0); 316 qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152); 317 qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024); 318 qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2); 319 qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64); 320 qemu_fdt_setprop_string(fdt, nodename, "compatible", 321 "sifive,fu540-c000-ccache"); 322 g_free(nodename); 323 324 phy_phandle = phandle++; 325 nodename = g_strdup_printf("/soc/ethernet@%lx", 326 (long)memmap[SIFIVE_U_GEM].base); 327 qemu_fdt_add_subnode(fdt, nodename); 328 qemu_fdt_setprop_string(fdt, nodename, "compatible", 329 "sifive,fu540-c000-gem"); 330 qemu_fdt_setprop_cells(fdt, nodename, "reg", 331 0x0, memmap[SIFIVE_U_GEM].base, 332 0x0, memmap[SIFIVE_U_GEM].size, 333 0x0, memmap[SIFIVE_U_GEM_MGMT].base, 334 0x0, memmap[SIFIVE_U_GEM_MGMT].size); 335 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); 336 qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii"); 337 qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle); 338 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 339 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ); 340 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 341 prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL); 342 qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names, 343 sizeof(ethclk_names)); 344 qemu_fdt_setprop(fdt, nodename, "local-mac-address", 345 s->soc.gem.conf.macaddr.a, ETH_ALEN); 346 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); 347 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); 348 349 qemu_fdt_add_subnode(fdt, "/aliases"); 350 qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename); 351 352 g_free(nodename); 353 354 nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0", 355 (long)memmap[SIFIVE_U_GEM].base); 356 qemu_fdt_add_subnode(fdt, nodename); 357 qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle); 358 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0); 359 g_free(nodename); 360 361 nodename = g_strdup_printf("/soc/serial@%lx", 362 (long)memmap[SIFIVE_U_UART0].base); 363 qemu_fdt_add_subnode(fdt, nodename); 364 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); 365 qemu_fdt_setprop_cells(fdt, nodename, "reg", 366 0x0, memmap[SIFIVE_U_UART0].base, 367 0x0, memmap[SIFIVE_U_UART0].size); 368 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 369 prci_phandle, PRCI_CLK_TLCLK); 370 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 371 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); 372 373 qemu_fdt_add_subnode(fdt, "/chosen"); 374 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); 375 if (cmdline) { 376 qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); 377 } 378 379 qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); 380 381 g_free(nodename); 382 } 383 384 static void sifive_u_machine_reset(void *opaque, int n, int level) 385 { 386 /* gpio pin active low triggers reset */ 387 if (!level) { 388 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 389 } 390 } 391 392 static void sifive_u_machine_init(MachineState *machine) 393 { 394 const struct MemmapEntry *memmap = sifive_u_memmap; 395 SiFiveUState *s = RISCV_U_MACHINE(machine); 396 MemoryRegion *system_memory = get_system_memory(); 397 MemoryRegion *main_mem = g_new(MemoryRegion, 1); 398 MemoryRegion *flash0 = g_new(MemoryRegion, 1); 399 target_ulong start_addr = memmap[SIFIVE_U_DRAM].base; 400 uint32_t start_addr_hi32 = 0x00000000; 401 int i; 402 uint32_t fdt_load_addr; 403 uint64_t kernel_entry; 404 405 /* Initialize SoC */ 406 object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC); 407 object_property_set_uint(OBJECT(&s->soc), "serial", s->serial, 408 &error_abort); 409 qdev_realize(DEVICE(&s->soc), NULL, &error_abort); 410 411 /* register RAM */ 412 memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram", 413 machine->ram_size, &error_fatal); 414 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DRAM].base, 415 main_mem); 416 417 /* register QSPI0 Flash */ 418 memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0", 419 memmap[SIFIVE_U_FLASH0].size, &error_fatal); 420 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_FLASH0].base, 421 flash0); 422 423 /* register gpio-restart */ 424 qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10, 425 qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); 426 427 /* create device tree */ 428 create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); 429 430 if (s->start_in_flash) { 431 /* 432 * If start_in_flash property is given, assign s->msel to a value 433 * that representing booting from QSPI0 memory-mapped flash. 434 * 435 * This also means that when both start_in_flash and msel properties 436 * are given, start_in_flash takes the precedence over msel. 437 * 438 * Note this is to keep backward compatibility not to break existing 439 * users that use start_in_flash property. 440 */ 441 s->msel = MSEL_MEMMAP_QSPI0_FLASH; 442 } 443 444 switch (s->msel) { 445 case MSEL_MEMMAP_QSPI0_FLASH: 446 start_addr = memmap[SIFIVE_U_FLASH0].base; 447 break; 448 case MSEL_L2LIM_QSPI0_FLASH: 449 case MSEL_L2LIM_QSPI2_SD: 450 start_addr = memmap[SIFIVE_U_L2LIM].base; 451 break; 452 default: 453 start_addr = memmap[SIFIVE_U_DRAM].base; 454 break; 455 } 456 457 riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL); 458 459 if (machine->kernel_filename) { 460 kernel_entry = riscv_load_kernel(machine->kernel_filename, NULL); 461 462 if (machine->initrd_filename) { 463 hwaddr start; 464 hwaddr end = riscv_load_initrd(machine->initrd_filename, 465 machine->ram_size, kernel_entry, 466 &start); 467 qemu_fdt_setprop_cell(s->fdt, "/chosen", 468 "linux,initrd-start", start); 469 qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end", 470 end); 471 } 472 } else { 473 /* 474 * If dynamic firmware is used, it doesn't know where is the next mode 475 * if kernel argument is not set. 476 */ 477 kernel_entry = 0; 478 } 479 480 /* Compute the fdt load address in dram */ 481 fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DRAM].base, 482 machine->ram_size, s->fdt); 483 #if defined(TARGET_RISCV64) 484 start_addr_hi32 = start_addr >> 32; 485 #endif 486 487 /* reset vector */ 488 uint32_t reset_vec[11] = { 489 s->msel, /* MSEL pin state */ 490 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 491 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 492 0xf1402573, /* csrr a0, mhartid */ 493 #if defined(TARGET_RISCV32) 494 0x0202a583, /* lw a1, 32(t0) */ 495 0x0182a283, /* lw t0, 24(t0) */ 496 #elif defined(TARGET_RISCV64) 497 0x0202b583, /* ld a1, 32(t0) */ 498 0x0182b283, /* ld t0, 24(t0) */ 499 #endif 500 0x00028067, /* jr t0 */ 501 start_addr, /* start: .dword */ 502 start_addr_hi32, 503 fdt_load_addr, /* fdt_laddr: .dword */ 504 0x00000000, 505 /* fw_dyn: */ 506 }; 507 508 /* copy in the reset vector in little_endian byte order */ 509 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { 510 reset_vec[i] = cpu_to_le32(reset_vec[i]); 511 } 512 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 513 memmap[SIFIVE_U_MROM].base, &address_space_memory); 514 515 riscv_rom_copy_firmware_info(memmap[SIFIVE_U_MROM].base, 516 memmap[SIFIVE_U_MROM].size, 517 sizeof(reset_vec), kernel_entry); 518 } 519 520 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp) 521 { 522 SiFiveUState *s = RISCV_U_MACHINE(obj); 523 524 return s->start_in_flash; 525 } 526 527 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp) 528 { 529 SiFiveUState *s = RISCV_U_MACHINE(obj); 530 531 s->start_in_flash = value; 532 } 533 534 static void sifive_u_machine_get_uint32_prop(Object *obj, Visitor *v, 535 const char *name, void *opaque, 536 Error **errp) 537 { 538 visit_type_uint32(v, name, (uint32_t *)opaque, errp); 539 } 540 541 static void sifive_u_machine_set_uint32_prop(Object *obj, Visitor *v, 542 const char *name, void *opaque, 543 Error **errp) 544 { 545 visit_type_uint32(v, name, (uint32_t *)opaque, errp); 546 } 547 548 static void sifive_u_machine_instance_init(Object *obj) 549 { 550 SiFiveUState *s = RISCV_U_MACHINE(obj); 551 552 s->start_in_flash = false; 553 object_property_add_bool(obj, "start-in-flash", 554 sifive_u_machine_get_start_in_flash, 555 sifive_u_machine_set_start_in_flash); 556 object_property_set_description(obj, "start-in-flash", 557 "Set on to tell QEMU's ROM to jump to " 558 "flash. Otherwise QEMU will jump to DRAM " 559 "or L2LIM depending on the msel value"); 560 561 s->msel = 0; 562 object_property_add(obj, "msel", "uint32", 563 sifive_u_machine_get_uint32_prop, 564 sifive_u_machine_set_uint32_prop, NULL, &s->msel); 565 object_property_set_description(obj, "msel", 566 "Mode Select (MSEL[3:0]) pin state"); 567 568 s->serial = OTP_SERIAL; 569 object_property_add(obj, "serial", "uint32", 570 sifive_u_machine_get_uint32_prop, 571 sifive_u_machine_set_uint32_prop, NULL, &s->serial); 572 object_property_set_description(obj, "serial", "Board serial number"); 573 } 574 575 static void sifive_u_machine_class_init(ObjectClass *oc, void *data) 576 { 577 MachineClass *mc = MACHINE_CLASS(oc); 578 579 mc->desc = "RISC-V Board compatible with SiFive U SDK"; 580 mc->init = sifive_u_machine_init; 581 mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT; 582 mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1; 583 mc->default_cpus = mc->min_cpus; 584 } 585 586 static const TypeInfo sifive_u_machine_typeinfo = { 587 .name = MACHINE_TYPE_NAME("sifive_u"), 588 .parent = TYPE_MACHINE, 589 .class_init = sifive_u_machine_class_init, 590 .instance_init = sifive_u_machine_instance_init, 591 .instance_size = sizeof(SiFiveUState), 592 }; 593 594 static void sifive_u_machine_init_register_types(void) 595 { 596 type_register_static(&sifive_u_machine_typeinfo); 597 } 598 599 type_init(sifive_u_machine_init_register_types) 600 601 static void sifive_u_soc_instance_init(Object *obj) 602 { 603 MachineState *ms = MACHINE(qdev_get_machine()); 604 SiFiveUSoCState *s = RISCV_U_SOC(obj); 605 606 object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER); 607 qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0); 608 609 object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus, 610 TYPE_RISCV_HART_ARRAY); 611 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); 612 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); 613 qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU); 614 qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004); 615 616 object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); 617 qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); 618 619 object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus, 620 TYPE_RISCV_HART_ARRAY); 621 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); 622 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); 623 qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", SIFIVE_U_CPU); 624 qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004); 625 626 object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI); 627 object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); 628 object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM); 629 object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO); 630 } 631 632 static void sifive_u_soc_realize(DeviceState *dev, Error **errp) 633 { 634 MachineState *ms = MACHINE(qdev_get_machine()); 635 SiFiveUSoCState *s = RISCV_U_SOC(dev); 636 const struct MemmapEntry *memmap = sifive_u_memmap; 637 MemoryRegion *system_memory = get_system_memory(); 638 MemoryRegion *mask_rom = g_new(MemoryRegion, 1); 639 MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1); 640 char *plic_hart_config; 641 size_t plic_hart_config_len; 642 int i; 643 NICInfo *nd = &nd_table[0]; 644 645 sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort); 646 sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort); 647 /* 648 * The cluster must be realized after the RISC-V hart array container, 649 * as the container's CPU object is only created on realize, and the 650 * CPU must exist and have been parented into the cluster before the 651 * cluster is realized. 652 */ 653 qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort); 654 qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort); 655 656 /* boot rom */ 657 memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom", 658 memmap[SIFIVE_U_MROM].size, &error_fatal); 659 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_MROM].base, 660 mask_rom); 661 662 /* 663 * Add L2-LIM at reset size. 664 * This should be reduced in size as the L2 Cache Controller WayEnable 665 * register is incremented. Unfortunately I don't see a nice (or any) way 666 * to handle reducing or blocking out the L2 LIM while still allowing it 667 * be re returned to all enabled after a reset. For the time being, just 668 * leave it enabled all the time. This won't break anything, but will be 669 * too generous to misbehaving guests. 670 */ 671 memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim", 672 memmap[SIFIVE_U_L2LIM].size, &error_fatal); 673 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_L2LIM].base, 674 l2lim_mem); 675 676 /* create PLIC hart topology configuration string */ 677 plic_hart_config_len = (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1) * 678 ms->smp.cpus; 679 plic_hart_config = g_malloc0(plic_hart_config_len); 680 for (i = 0; i < ms->smp.cpus; i++) { 681 if (i != 0) { 682 strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG, 683 plic_hart_config_len); 684 } else { 685 strncat(plic_hart_config, "M", plic_hart_config_len); 686 } 687 plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1); 688 } 689 690 /* MMIO */ 691 s->plic = sifive_plic_create(memmap[SIFIVE_U_PLIC].base, 692 plic_hart_config, 0, 693 SIFIVE_U_PLIC_NUM_SOURCES, 694 SIFIVE_U_PLIC_NUM_PRIORITIES, 695 SIFIVE_U_PLIC_PRIORITY_BASE, 696 SIFIVE_U_PLIC_PENDING_BASE, 697 SIFIVE_U_PLIC_ENABLE_BASE, 698 SIFIVE_U_PLIC_ENABLE_STRIDE, 699 SIFIVE_U_PLIC_CONTEXT_BASE, 700 SIFIVE_U_PLIC_CONTEXT_STRIDE, 701 memmap[SIFIVE_U_PLIC].size); 702 g_free(plic_hart_config); 703 sifive_uart_create(system_memory, memmap[SIFIVE_U_UART0].base, 704 serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ)); 705 sifive_uart_create(system_memory, memmap[SIFIVE_U_UART1].base, 706 serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ)); 707 sifive_clint_create(memmap[SIFIVE_U_CLINT].base, 708 memmap[SIFIVE_U_CLINT].size, 0, ms->smp.cpus, 709 SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, 710 SIFIVE_CLINT_TIMEBASE_FREQ, false); 711 712 if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) { 713 return; 714 } 715 sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_PRCI].base); 716 717 qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16); 718 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) { 719 return; 720 } 721 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_GPIO].base); 722 723 /* Pass all GPIOs to the SOC layer so they are available to the board */ 724 qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL); 725 726 /* Connect GPIO interrupts to the PLIC */ 727 for (i = 0; i < 16; i++) { 728 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i, 729 qdev_get_gpio_in(DEVICE(s->plic), 730 SIFIVE_U_GPIO_IRQ0 + i)); 731 } 732 733 qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial); 734 if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) { 735 return; 736 } 737 sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_OTP].base); 738 739 /* FIXME use qdev NIC properties instead of nd_table[] */ 740 if (nd->used) { 741 qemu_check_nic_model(nd, TYPE_CADENCE_GEM); 742 qdev_set_nic_properties(DEVICE(&s->gem), nd); 743 } 744 object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION, 745 &error_abort); 746 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) { 747 return; 748 } 749 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_GEM].base); 750 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0, 751 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ)); 752 753 create_unimplemented_device("riscv.sifive.u.gem-mgmt", 754 memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size); 755 756 create_unimplemented_device("riscv.sifive.u.dmc", 757 memmap[SIFIVE_U_DMC].base, memmap[SIFIVE_U_DMC].size); 758 759 create_unimplemented_device("riscv.sifive.u.l2cc", 760 memmap[SIFIVE_U_L2CC].base, memmap[SIFIVE_U_L2CC].size); 761 } 762 763 static Property sifive_u_soc_props[] = { 764 DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL), 765 DEFINE_PROP_END_OF_LIST() 766 }; 767 768 static void sifive_u_soc_class_init(ObjectClass *oc, void *data) 769 { 770 DeviceClass *dc = DEVICE_CLASS(oc); 771 772 device_class_set_props(dc, sifive_u_soc_props); 773 dc->realize = sifive_u_soc_realize; 774 /* Reason: Uses serial_hds in realize function, thus can't be used twice */ 775 dc->user_creatable = false; 776 } 777 778 static const TypeInfo sifive_u_soc_type_info = { 779 .name = TYPE_RISCV_U_SOC, 780 .parent = TYPE_DEVICE, 781 .instance_size = sizeof(SiFiveUSoCState), 782 .instance_init = sifive_u_soc_instance_init, 783 .class_init = sifive_u_soc_class_init, 784 }; 785 786 static void sifive_u_soc_register_types(void) 787 { 788 type_register_static(&sifive_u_soc_type_info); 789 } 790 791 type_init(sifive_u_soc_register_types) 792