xref: /openbmc/qemu/hw/riscv/sifive_u.c (revision 8c6631e6)
1 /*
2  * QEMU RISC-V Board Compatible with SiFive Freedom U SDK
3  *
4  * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
5  * Copyright (c) 2017 SiFive, Inc.
6  * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
7  *
8  * Provides a board compatible with the SiFive Freedom U SDK:
9  *
10  * 0) UART
11  * 1) CLINT (Core Level Interruptor)
12  * 2) PLIC (Platform Level Interrupt Controller)
13  * 3) PRCI (Power, Reset, Clock, Interrupt)
14  * 4) GPIO (General Purpose Input/Output Controller)
15  * 5) OTP (One-Time Programmable) memory with stored serial number
16  * 6) GEM (Gigabit Ethernet Controller) and management block
17  * 7) DMA (Direct Memory Access Controller)
18  * 8) SPI0 connected to an SPI flash
19  * 9) SPI2 connected to an SD card
20  * 10) PWM0 and PWM1
21  *
22  * This board currently generates devicetree dynamically that indicates at least
23  * two harts and up to five harts.
24  *
25  * This program is free software; you can redistribute it and/or modify it
26  * under the terms and conditions of the GNU General Public License,
27  * version 2 or later, as published by the Free Software Foundation.
28  *
29  * This program is distributed in the hope it will be useful, but WITHOUT
30  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
31  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
32  * more details.
33  *
34  * You should have received a copy of the GNU General Public License along with
35  * this program.  If not, see <http://www.gnu.org/licenses/>.
36  */
37 
38 #include "qemu/osdep.h"
39 #include "qemu/error-report.h"
40 #include "qapi/error.h"
41 #include "qapi/visitor.h"
42 #include "hw/boards.h"
43 #include "hw/irq.h"
44 #include "hw/loader.h"
45 #include "hw/sysbus.h"
46 #include "hw/char/serial.h"
47 #include "hw/cpu/cluster.h"
48 #include "hw/misc/unimp.h"
49 #include "hw/sd/sd.h"
50 #include "hw/ssi/ssi.h"
51 #include "target/riscv/cpu.h"
52 #include "hw/riscv/riscv_hart.h"
53 #include "hw/riscv/sifive_u.h"
54 #include "hw/riscv/boot.h"
55 #include "hw/char/sifive_uart.h"
56 #include "hw/intc/riscv_aclint.h"
57 #include "hw/intc/sifive_plic.h"
58 #include "chardev/char.h"
59 #include "net/eth.h"
60 #include "sysemu/device_tree.h"
61 #include "sysemu/runstate.h"
62 #include "sysemu/sysemu.h"
63 
64 #include <libfdt.h>
65 
66 /* CLINT timebase frequency */
67 #define CLINT_TIMEBASE_FREQ 1000000
68 
69 static const MemMapEntry sifive_u_memmap[] = {
70     [SIFIVE_U_DEV_DEBUG] =    {        0x0,      0x100 },
71     [SIFIVE_U_DEV_MROM] =     {     0x1000,     0xf000 },
72     [SIFIVE_U_DEV_CLINT] =    {  0x2000000,    0x10000 },
73     [SIFIVE_U_DEV_L2CC] =     {  0x2010000,     0x1000 },
74     [SIFIVE_U_DEV_PDMA] =     {  0x3000000,   0x100000 },
75     [SIFIVE_U_DEV_L2LIM] =    {  0x8000000,  0x2000000 },
76     [SIFIVE_U_DEV_PLIC] =     {  0xc000000,  0x4000000 },
77     [SIFIVE_U_DEV_PRCI] =     { 0x10000000,     0x1000 },
78     [SIFIVE_U_DEV_UART0] =    { 0x10010000,     0x1000 },
79     [SIFIVE_U_DEV_UART1] =    { 0x10011000,     0x1000 },
80     [SIFIVE_U_DEV_PWM0] =     { 0x10020000,     0x1000 },
81     [SIFIVE_U_DEV_PWM1] =     { 0x10021000,     0x1000 },
82     [SIFIVE_U_DEV_QSPI0] =    { 0x10040000,     0x1000 },
83     [SIFIVE_U_DEV_QSPI2] =    { 0x10050000,     0x1000 },
84     [SIFIVE_U_DEV_GPIO] =     { 0x10060000,     0x1000 },
85     [SIFIVE_U_DEV_OTP] =      { 0x10070000,     0x1000 },
86     [SIFIVE_U_DEV_GEM] =      { 0x10090000,     0x2000 },
87     [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000,     0x1000 },
88     [SIFIVE_U_DEV_DMC] =      { 0x100b0000,    0x10000 },
89     [SIFIVE_U_DEV_FLASH0] =   { 0x20000000, 0x10000000 },
90     [SIFIVE_U_DEV_DRAM] =     { 0x80000000,        0x0 },
91 };
92 
93 #define OTP_SERIAL          1
94 #define GEM_REVISION        0x10070109
95 
96 static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
97                        bool is_32_bit)
98 {
99     MachineState *ms = MACHINE(s);
100     uint64_t mem_size = ms->ram_size;
101     void *fdt;
102     int cpu, fdt_size;
103     uint32_t *cells;
104     char *nodename;
105     uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
106     uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
107     static const char * const ethclk_names[2] = { "pclk", "hclk" };
108     static const char * const clint_compat[2] = {
109         "sifive,clint0", "riscv,clint0"
110     };
111     static const char * const plic_compat[2] = {
112         "sifive,plic-1.0.0", "riscv,plic0"
113     };
114 
115     if (ms->dtb) {
116         fdt = ms->fdt = load_device_tree(ms->dtb, &fdt_size);
117         if (!fdt) {
118             error_report("load_device_tree() failed");
119             exit(1);
120         }
121     } else {
122         fdt = ms->fdt = create_device_tree(&fdt_size);
123         if (!fdt) {
124             error_report("create_device_tree() failed");
125             exit(1);
126         }
127     }
128 
129     qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
130     qemu_fdt_setprop_string(fdt, "/", "compatible",
131                             "sifive,hifive-unleashed-a00");
132     qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
133     qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
134 
135     qemu_fdt_add_subnode(fdt, "/soc");
136     qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
137     qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
138     qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
139     qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
140 
141     hfclk_phandle = phandle++;
142     nodename = g_strdup_printf("/hfclk");
143     qemu_fdt_add_subnode(fdt, nodename);
144     qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
145     qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
146     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
147         SIFIVE_U_HFCLK_FREQ);
148     qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
149     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
150     g_free(nodename);
151 
152     rtcclk_phandle = phandle++;
153     nodename = g_strdup_printf("/rtcclk");
154     qemu_fdt_add_subnode(fdt, nodename);
155     qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
156     qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
157     qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
158         SIFIVE_U_RTCCLK_FREQ);
159     qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
160     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
161     g_free(nodename);
162 
163     nodename = g_strdup_printf("/memory@%lx",
164         (long)memmap[SIFIVE_U_DEV_DRAM].base);
165     qemu_fdt_add_subnode(fdt, nodename);
166     qemu_fdt_setprop_cells(fdt, nodename, "reg",
167         memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base,
168         mem_size >> 32, mem_size);
169     qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
170     g_free(nodename);
171 
172     qemu_fdt_add_subnode(fdt, "/cpus");
173     qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
174         CLINT_TIMEBASE_FREQ);
175     qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
176     qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
177 
178     for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
179         int cpu_phandle = phandle++;
180         nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
181         char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
182         char *isa;
183         qemu_fdt_add_subnode(fdt, nodename);
184         /* cpu 0 is the management hart that does not have mmu */
185         if (cpu != 0) {
186             if (is_32_bit) {
187                 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
188             } else {
189                 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
190             }
191             isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]);
192         } else {
193             isa = riscv_isa_string(&s->soc.e_cpus.harts[0]);
194         }
195         qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa);
196         qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
197         qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
198         qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
199         qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
200         qemu_fdt_add_subnode(fdt, intc);
201         qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
202         qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
203         qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
204         qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
205         g_free(isa);
206         g_free(intc);
207         g_free(nodename);
208     }
209 
210     cells =  g_new0(uint32_t, ms->smp.cpus * 4);
211     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
212         nodename =
213             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
214         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
215         cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
216         cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
217         cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
218         cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
219         g_free(nodename);
220     }
221     nodename = g_strdup_printf("/soc/clint@%lx",
222         (long)memmap[SIFIVE_U_DEV_CLINT].base);
223     qemu_fdt_add_subnode(fdt, nodename);
224     qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
225         (char **)&clint_compat, ARRAY_SIZE(clint_compat));
226     qemu_fdt_setprop_cells(fdt, nodename, "reg",
227         0x0, memmap[SIFIVE_U_DEV_CLINT].base,
228         0x0, memmap[SIFIVE_U_DEV_CLINT].size);
229     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
230         cells, ms->smp.cpus * sizeof(uint32_t) * 4);
231     g_free(cells);
232     g_free(nodename);
233 
234     nodename = g_strdup_printf("/soc/otp@%lx",
235         (long)memmap[SIFIVE_U_DEV_OTP].base);
236     qemu_fdt_add_subnode(fdt, nodename);
237     qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE);
238     qemu_fdt_setprop_cells(fdt, nodename, "reg",
239         0x0, memmap[SIFIVE_U_DEV_OTP].base,
240         0x0, memmap[SIFIVE_U_DEV_OTP].size);
241     qemu_fdt_setprop_string(fdt, nodename, "compatible",
242         "sifive,fu540-c000-otp");
243     g_free(nodename);
244 
245     prci_phandle = phandle++;
246     nodename = g_strdup_printf("/soc/clock-controller@%lx",
247         (long)memmap[SIFIVE_U_DEV_PRCI].base);
248     qemu_fdt_add_subnode(fdt, nodename);
249     qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
250     qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
251     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
252         hfclk_phandle, rtcclk_phandle);
253     qemu_fdt_setprop_cells(fdt, nodename, "reg",
254         0x0, memmap[SIFIVE_U_DEV_PRCI].base,
255         0x0, memmap[SIFIVE_U_DEV_PRCI].size);
256     qemu_fdt_setprop_string(fdt, nodename, "compatible",
257         "sifive,fu540-c000-prci");
258     g_free(nodename);
259 
260     plic_phandle = phandle++;
261     cells =  g_new0(uint32_t, ms->smp.cpus * 4 - 2);
262     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
263         nodename =
264             g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
265         uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
266         /* cpu 0 is the management hart that does not have S-mode */
267         if (cpu == 0) {
268             cells[0] = cpu_to_be32(intc_phandle);
269             cells[1] = cpu_to_be32(IRQ_M_EXT);
270         } else {
271             cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
272             cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
273             cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
274             cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
275         }
276         g_free(nodename);
277     }
278     nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
279         (long)memmap[SIFIVE_U_DEV_PLIC].base);
280     qemu_fdt_add_subnode(fdt, nodename);
281     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
282     qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
283         (char **)&plic_compat, ARRAY_SIZE(plic_compat));
284     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
285     qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
286         cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
287     qemu_fdt_setprop_cells(fdt, nodename, "reg",
288         0x0, memmap[SIFIVE_U_DEV_PLIC].base,
289         0x0, memmap[SIFIVE_U_DEV_PLIC].size);
290     qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev",
291                           SIFIVE_U_PLIC_NUM_SOURCES - 1);
292     qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
293     plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
294     g_free(cells);
295     g_free(nodename);
296 
297     gpio_phandle = phandle++;
298     nodename = g_strdup_printf("/soc/gpio@%lx",
299         (long)memmap[SIFIVE_U_DEV_GPIO].base);
300     qemu_fdt_add_subnode(fdt, nodename);
301     qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle);
302     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
303         prci_phandle, PRCI_CLK_TLCLK);
304     qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2);
305     qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
306     qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2);
307     qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0);
308     qemu_fdt_setprop_cells(fdt, nodename, "reg",
309         0x0, memmap[SIFIVE_U_DEV_GPIO].base,
310         0x0, memmap[SIFIVE_U_DEV_GPIO].size);
311     qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0,
312         SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3,
313         SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6,
314         SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9,
315         SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12,
316         SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15);
317     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
318     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0");
319     g_free(nodename);
320 
321     nodename = g_strdup_printf("/gpio-restart");
322     qemu_fdt_add_subnode(fdt, nodename);
323     qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1);
324     qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart");
325     g_free(nodename);
326 
327     nodename = g_strdup_printf("/soc/dma@%lx",
328         (long)memmap[SIFIVE_U_DEV_PDMA].base);
329     qemu_fdt_add_subnode(fdt, nodename);
330     qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1);
331     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
332         SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2,
333         SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5,
334         SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7);
335     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
336     qemu_fdt_setprop_cells(fdt, nodename, "reg",
337         0x0, memmap[SIFIVE_U_DEV_PDMA].base,
338         0x0, memmap[SIFIVE_U_DEV_PDMA].size);
339     qemu_fdt_setprop_string(fdt, nodename, "compatible",
340                             "sifive,fu540-c000-pdma");
341     g_free(nodename);
342 
343     nodename = g_strdup_printf("/soc/cache-controller@%lx",
344         (long)memmap[SIFIVE_U_DEV_L2CC].base);
345     qemu_fdt_add_subnode(fdt, nodename);
346     qemu_fdt_setprop_cells(fdt, nodename, "reg",
347         0x0, memmap[SIFIVE_U_DEV_L2CC].base,
348         0x0, memmap[SIFIVE_U_DEV_L2CC].size);
349     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
350         SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2);
351     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
352     qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0);
353     qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152);
354     qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024);
355     qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2);
356     qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64);
357     qemu_fdt_setprop_string(fdt, nodename, "compatible",
358                             "sifive,fu540-c000-ccache");
359     g_free(nodename);
360 
361     nodename = g_strdup_printf("/soc/spi@%lx",
362         (long)memmap[SIFIVE_U_DEV_QSPI2].base);
363     qemu_fdt_add_subnode(fdt, nodename);
364     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
365     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
366     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
367         prci_phandle, PRCI_CLK_TLCLK);
368     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
369     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
370     qemu_fdt_setprop_cells(fdt, nodename, "reg",
371         0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
372         0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
373     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
374     g_free(nodename);
375 
376     nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
377         (long)memmap[SIFIVE_U_DEV_QSPI2].base);
378     qemu_fdt_add_subnode(fdt, nodename);
379     qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
380     qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
381     qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
382     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
383     qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
384     g_free(nodename);
385 
386     nodename = g_strdup_printf("/soc/spi@%lx",
387         (long)memmap[SIFIVE_U_DEV_QSPI0].base);
388     qemu_fdt_add_subnode(fdt, nodename);
389     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
390     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
391     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
392         prci_phandle, PRCI_CLK_TLCLK);
393     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ);
394     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
395     qemu_fdt_setprop_cells(fdt, nodename, "reg",
396         0x0, memmap[SIFIVE_U_DEV_QSPI0].base,
397         0x0, memmap[SIFIVE_U_DEV_QSPI0].size);
398     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
399     g_free(nodename);
400 
401     nodename = g_strdup_printf("/soc/spi@%lx/flash@0",
402         (long)memmap[SIFIVE_U_DEV_QSPI0].base);
403     qemu_fdt_add_subnode(fdt, nodename);
404     qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4);
405     qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4);
406     qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0);
407     qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000);
408     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
409     qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor");
410     g_free(nodename);
411 
412     phy_phandle = phandle++;
413     nodename = g_strdup_printf("/soc/ethernet@%lx",
414         (long)memmap[SIFIVE_U_DEV_GEM].base);
415     qemu_fdt_add_subnode(fdt, nodename);
416     qemu_fdt_setprop_string(fdt, nodename, "compatible",
417         "sifive,fu540-c000-gem");
418     qemu_fdt_setprop_cells(fdt, nodename, "reg",
419         0x0, memmap[SIFIVE_U_DEV_GEM].base,
420         0x0, memmap[SIFIVE_U_DEV_GEM].size,
421         0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base,
422         0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
423     qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
424     qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
425     qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
426     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
427     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
428     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
429         prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
430     qemu_fdt_setprop_string_array(fdt, nodename, "clock-names",
431         (char **)&ethclk_names, ARRAY_SIZE(ethclk_names));
432     qemu_fdt_setprop(fdt, nodename, "local-mac-address",
433         s->soc.gem.conf.macaddr.a, ETH_ALEN);
434     qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
435     qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
436 
437     qemu_fdt_add_subnode(fdt, "/aliases");
438     qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename);
439 
440     g_free(nodename);
441 
442     nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
443         (long)memmap[SIFIVE_U_DEV_GEM].base);
444     qemu_fdt_add_subnode(fdt, nodename);
445     qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
446     qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
447     g_free(nodename);
448 
449     nodename = g_strdup_printf("/soc/pwm@%lx",
450         (long)memmap[SIFIVE_U_DEV_PWM0].base);
451     qemu_fdt_add_subnode(fdt, nodename);
452     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
453     qemu_fdt_setprop_cells(fdt, nodename, "reg",
454         0x0, memmap[SIFIVE_U_DEV_PWM0].base,
455         0x0, memmap[SIFIVE_U_DEV_PWM0].size);
456     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
457     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
458                            SIFIVE_U_PWM0_IRQ0, SIFIVE_U_PWM0_IRQ1,
459                            SIFIVE_U_PWM0_IRQ2, SIFIVE_U_PWM0_IRQ3);
460     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
461                            prci_phandle, PRCI_CLK_TLCLK);
462     qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
463     g_free(nodename);
464 
465     nodename = g_strdup_printf("/soc/pwm@%lx",
466         (long)memmap[SIFIVE_U_DEV_PWM1].base);
467     qemu_fdt_add_subnode(fdt, nodename);
468     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
469     qemu_fdt_setprop_cells(fdt, nodename, "reg",
470         0x0, memmap[SIFIVE_U_DEV_PWM1].base,
471         0x0, memmap[SIFIVE_U_DEV_PWM1].size);
472     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
473     qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
474                            SIFIVE_U_PWM1_IRQ0, SIFIVE_U_PWM1_IRQ1,
475                            SIFIVE_U_PWM1_IRQ2, SIFIVE_U_PWM1_IRQ3);
476     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
477                            prci_phandle, PRCI_CLK_TLCLK);
478     qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
479     g_free(nodename);
480 
481     nodename = g_strdup_printf("/soc/serial@%lx",
482         (long)memmap[SIFIVE_U_DEV_UART1].base);
483     qemu_fdt_add_subnode(fdt, nodename);
484     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
485     qemu_fdt_setprop_cells(fdt, nodename, "reg",
486         0x0, memmap[SIFIVE_U_DEV_UART1].base,
487         0x0, memmap[SIFIVE_U_DEV_UART1].size);
488     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
489         prci_phandle, PRCI_CLK_TLCLK);
490     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
491     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ);
492 
493     qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename);
494     g_free(nodename);
495 
496     nodename = g_strdup_printf("/soc/serial@%lx",
497         (long)memmap[SIFIVE_U_DEV_UART0].base);
498     qemu_fdt_add_subnode(fdt, nodename);
499     qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
500     qemu_fdt_setprop_cells(fdt, nodename, "reg",
501         0x0, memmap[SIFIVE_U_DEV_UART0].base,
502         0x0, memmap[SIFIVE_U_DEV_UART0].size);
503     qemu_fdt_setprop_cells(fdt, nodename, "clocks",
504         prci_phandle, PRCI_CLK_TLCLK);
505     qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
506     qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
507 
508     qemu_fdt_add_subnode(fdt, "/chosen");
509     qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
510     qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
511 
512     g_free(nodename);
513 }
514 
515 static void sifive_u_machine_reset(void *opaque, int n, int level)
516 {
517     /* gpio pin active low triggers reset */
518     if (!level) {
519         qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
520     }
521 }
522 
523 static void sifive_u_machine_init(MachineState *machine)
524 {
525     const MemMapEntry *memmap = sifive_u_memmap;
526     SiFiveUState *s = RISCV_U_MACHINE(machine);
527     MemoryRegion *system_memory = get_system_memory();
528     MemoryRegion *flash0 = g_new(MemoryRegion, 1);
529     target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
530     target_ulong firmware_end_addr, kernel_start_addr;
531     const char *firmware_name;
532     uint32_t start_addr_hi32 = 0x00000000;
533     int i;
534     uint32_t fdt_load_addr;
535     uint64_t kernel_entry;
536     DriveInfo *dinfo;
537     BlockBackend *blk;
538     DeviceState *flash_dev, *sd_dev, *card_dev;
539     qemu_irq flash_cs, sd_cs;
540 
541     /* Initialize SoC */
542     object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
543     object_property_set_uint(OBJECT(&s->soc), "serial", s->serial,
544                              &error_abort);
545     object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type,
546                              &error_abort);
547     qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
548 
549     /* register RAM */
550     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base,
551                                 machine->ram);
552 
553     /* register QSPI0 Flash */
554     memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0",
555                            memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal);
556     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base,
557                                 flash0);
558 
559     /* register gpio-restart */
560     qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10,
561                           qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
562 
563     /* create device tree */
564     create_fdt(s, memmap, riscv_is_32bit(&s->soc.u_cpus));
565 
566     if (s->start_in_flash) {
567         /*
568          * If start_in_flash property is given, assign s->msel to a value
569          * that representing booting from QSPI0 memory-mapped flash.
570          *
571          * This also means that when both start_in_flash and msel properties
572          * are given, start_in_flash takes the precedence over msel.
573          *
574          * Note this is to keep backward compatibility not to break existing
575          * users that use start_in_flash property.
576          */
577         s->msel = MSEL_MEMMAP_QSPI0_FLASH;
578     }
579 
580     switch (s->msel) {
581     case MSEL_MEMMAP_QSPI0_FLASH:
582         start_addr = memmap[SIFIVE_U_DEV_FLASH0].base;
583         break;
584     case MSEL_L2LIM_QSPI0_FLASH:
585     case MSEL_L2LIM_QSPI2_SD:
586         start_addr = memmap[SIFIVE_U_DEV_L2LIM].base;
587         break;
588     default:
589         start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
590         break;
591     }
592 
593     firmware_name = riscv_default_firmware_name(&s->soc.u_cpus);
594     firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
595                                                      start_addr, NULL);
596 
597     if (machine->kernel_filename) {
598         kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
599                                                          firmware_end_addr);
600 
601         kernel_entry = riscv_load_kernel(machine, kernel_start_addr, NULL);
602 
603         if (machine->initrd_filename) {
604             riscv_load_initrd(machine, kernel_entry);
605         }
606 
607         if (machine->kernel_cmdline && *machine->kernel_cmdline) {
608             qemu_fdt_setprop_string(machine->fdt, "/chosen", "bootargs",
609                                     machine->kernel_cmdline);
610         }
611     } else {
612        /*
613         * If dynamic firmware is used, it doesn't know where is the next mode
614         * if kernel argument is not set.
615         */
616         kernel_entry = 0;
617     }
618 
619     fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base,
620                                            memmap[SIFIVE_U_DEV_DRAM].size,
621                                            machine);
622     riscv_load_fdt(fdt_load_addr, machine->fdt);
623 
624     if (!riscv_is_32bit(&s->soc.u_cpus)) {
625         start_addr_hi32 = (uint64_t)start_addr >> 32;
626     }
627 
628     /* reset vector */
629     uint32_t reset_vec[12] = {
630         s->msel,                       /* MSEL pin state */
631         0x00000297,                    /* 1:  auipc  t0, %pcrel_hi(fw_dyn) */
632         0x02c28613,                    /*     addi   a2, t0, %pcrel_lo(1b) */
633         0xf1402573,                    /*     csrr   a0, mhartid  */
634         0,
635         0,
636         0x00028067,                    /*     jr     t0 */
637         start_addr,                    /* start: .dword */
638         start_addr_hi32,
639         fdt_load_addr,                 /* fdt_laddr: .dword */
640         0x00000000,
641         0x00000000,
642                                        /* fw_dyn: */
643     };
644     if (riscv_is_32bit(&s->soc.u_cpus)) {
645         reset_vec[4] = 0x0202a583;     /*     lw     a1, 32(t0) */
646         reset_vec[5] = 0x0182a283;     /*     lw     t0, 24(t0) */
647     } else {
648         reset_vec[4] = 0x0202b583;     /*     ld     a1, 32(t0) */
649         reset_vec[5] = 0x0182b283;     /*     ld     t0, 24(t0) */
650     }
651 
652 
653     /* copy in the reset vector in little_endian byte order */
654     for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
655         reset_vec[i] = cpu_to_le32(reset_vec[i]);
656     }
657     rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
658                           memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
659 
660     riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
661                                  memmap[SIFIVE_U_DEV_MROM].size,
662                                  sizeof(reset_vec), kernel_entry);
663 
664     /* Connect an SPI flash to SPI0 */
665     flash_dev = qdev_new("is25wp256");
666     dinfo = drive_get(IF_MTD, 0, 0);
667     if (dinfo) {
668         qdev_prop_set_drive_err(flash_dev, "drive",
669                                 blk_by_legacy_dinfo(dinfo),
670                                 &error_fatal);
671     }
672     qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal);
673 
674     flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
675     sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
676 
677     /* Connect an SD card to SPI2 */
678     sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
679 
680     sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
681     sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
682 
683     dinfo = drive_get(IF_SD, 0, 0);
684     blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
685     card_dev = qdev_new(TYPE_SD_CARD);
686     qdev_prop_set_drive_err(card_dev, "drive", blk, &error_fatal);
687     qdev_prop_set_bit(card_dev, "spi", true);
688     qdev_realize_and_unref(card_dev,
689                            qdev_get_child_bus(sd_dev, "sd-bus"),
690                            &error_fatal);
691 }
692 
693 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
694 {
695     SiFiveUState *s = RISCV_U_MACHINE(obj);
696 
697     return s->start_in_flash;
698 }
699 
700 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp)
701 {
702     SiFiveUState *s = RISCV_U_MACHINE(obj);
703 
704     s->start_in_flash = value;
705 }
706 
707 static void sifive_u_machine_instance_init(Object *obj)
708 {
709     SiFiveUState *s = RISCV_U_MACHINE(obj);
710 
711     s->start_in_flash = false;
712     s->msel = 0;
713     object_property_add_uint32_ptr(obj, "msel", &s->msel,
714                                    OBJ_PROP_FLAG_READWRITE);
715     object_property_set_description(obj, "msel",
716                                     "Mode Select (MSEL[3:0]) pin state");
717 
718     s->serial = OTP_SERIAL;
719     object_property_add_uint32_ptr(obj, "serial", &s->serial,
720                                    OBJ_PROP_FLAG_READWRITE);
721     object_property_set_description(obj, "serial", "Board serial number");
722 }
723 
724 static void sifive_u_machine_class_init(ObjectClass *oc, void *data)
725 {
726     MachineClass *mc = MACHINE_CLASS(oc);
727 
728     mc->desc = "RISC-V Board compatible with SiFive U SDK";
729     mc->init = sifive_u_machine_init;
730     mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
731     mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
732     mc->default_cpu_type = SIFIVE_U_CPU;
733     mc->default_cpus = mc->min_cpus;
734     mc->default_ram_id = "riscv.sifive.u.ram";
735 
736     object_class_property_add_bool(oc, "start-in-flash",
737                                    sifive_u_machine_get_start_in_flash,
738                                    sifive_u_machine_set_start_in_flash);
739     object_class_property_set_description(oc, "start-in-flash",
740                                           "Set on to tell QEMU's ROM to jump to "
741                                           "flash. Otherwise QEMU will jump to DRAM "
742                                           "or L2LIM depending on the msel value");
743 }
744 
745 static const TypeInfo sifive_u_machine_typeinfo = {
746     .name       = MACHINE_TYPE_NAME("sifive_u"),
747     .parent     = TYPE_MACHINE,
748     .class_init = sifive_u_machine_class_init,
749     .instance_init = sifive_u_machine_instance_init,
750     .instance_size = sizeof(SiFiveUState),
751 };
752 
753 static void sifive_u_machine_init_register_types(void)
754 {
755     type_register_static(&sifive_u_machine_typeinfo);
756 }
757 
758 type_init(sifive_u_machine_init_register_types)
759 
760 static void sifive_u_soc_instance_init(Object *obj)
761 {
762     SiFiveUSoCState *s = RISCV_U_SOC(obj);
763 
764     object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
765     qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
766 
767     object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
768                             TYPE_RISCV_HART_ARRAY);
769     qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
770     qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
771     qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU);
772     qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004);
773 
774     object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
775     qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
776 
777     object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
778                             TYPE_RISCV_HART_ARRAY);
779 
780     object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI);
781     object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP);
782     object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM);
783     object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
784     object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
785     object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
786     object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
787     object_initialize_child(obj, "pwm0", &s->pwm[0], TYPE_SIFIVE_PWM);
788     object_initialize_child(obj, "pwm1", &s->pwm[1], TYPE_SIFIVE_PWM);
789 }
790 
791 static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
792 {
793     MachineState *ms = MACHINE(qdev_get_machine());
794     SiFiveUSoCState *s = RISCV_U_SOC(dev);
795     const MemMapEntry *memmap = sifive_u_memmap;
796     MemoryRegion *system_memory = get_system_memory();
797     MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
798     MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
799     char *plic_hart_config;
800     int i, j;
801     NICInfo *nd = &nd_table[0];
802 
803     qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
804     qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
805     qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type);
806     qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004);
807 
808     sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_fatal);
809     sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_fatal);
810     /*
811      * The cluster must be realized after the RISC-V hart array container,
812      * as the container's CPU object is only created on realize, and the
813      * CPU must exist and have been parented into the cluster before the
814      * cluster is realized.
815      */
816     qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
817     qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
818 
819     /* boot rom */
820     memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom",
821                            memmap[SIFIVE_U_DEV_MROM].size, &error_fatal);
822     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base,
823                                 mask_rom);
824 
825     /*
826      * Add L2-LIM at reset size.
827      * This should be reduced in size as the L2 Cache Controller WayEnable
828      * register is incremented. Unfortunately I don't see a nice (or any) way
829      * to handle reducing or blocking out the L2 LIM while still allowing it
830      * be re returned to all enabled after a reset. For the time being, just
831      * leave it enabled all the time. This won't break anything, but will be
832      * too generous to misbehaving guests.
833      */
834     memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim",
835                            memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal);
836     memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base,
837                                 l2lim_mem);
838 
839     /* create PLIC hart topology configuration string */
840     plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus);
841 
842     /* MMIO */
843     s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base,
844         plic_hart_config, ms->smp.cpus, 0,
845         SIFIVE_U_PLIC_NUM_SOURCES,
846         SIFIVE_U_PLIC_NUM_PRIORITIES,
847         SIFIVE_U_PLIC_PRIORITY_BASE,
848         SIFIVE_U_PLIC_PENDING_BASE,
849         SIFIVE_U_PLIC_ENABLE_BASE,
850         SIFIVE_U_PLIC_ENABLE_STRIDE,
851         SIFIVE_U_PLIC_CONTEXT_BASE,
852         SIFIVE_U_PLIC_CONTEXT_STRIDE,
853         memmap[SIFIVE_U_DEV_PLIC].size);
854     g_free(plic_hart_config);
855     sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base,
856         serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
857     sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base,
858         serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
859     riscv_aclint_swi_create(memmap[SIFIVE_U_DEV_CLINT].base, 0,
860         ms->smp.cpus, false);
861     riscv_aclint_mtimer_create(memmap[SIFIVE_U_DEV_CLINT].base +
862             RISCV_ACLINT_SWI_SIZE,
863         RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
864         RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
865         CLINT_TIMEBASE_FREQ, false);
866 
867     if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
868         return;
869     }
870     sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base);
871 
872     qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16);
873     if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
874         return;
875     }
876     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base);
877 
878     /* Pass all GPIOs to the SOC layer so they are available to the board */
879     qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL);
880 
881     /* Connect GPIO interrupts to the PLIC */
882     for (i = 0; i < 16; i++) {
883         sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i,
884                            qdev_get_gpio_in(DEVICE(s->plic),
885                                             SIFIVE_U_GPIO_IRQ0 + i));
886     }
887 
888     /* PDMA */
889     sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
890     sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base);
891 
892     /* Connect PDMA interrupts to the PLIC */
893     for (i = 0; i < SIFIVE_PDMA_IRQS; i++) {
894         sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i,
895                            qdev_get_gpio_in(DEVICE(s->plic),
896                                             SIFIVE_U_PDMA_IRQ0 + i));
897     }
898 
899     qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial);
900     if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) {
901         return;
902     }
903     sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base);
904 
905     /* FIXME use qdev NIC properties instead of nd_table[] */
906     if (nd->used) {
907         qemu_check_nic_model(nd, TYPE_CADENCE_GEM);
908         qdev_set_nic_properties(DEVICE(&s->gem), nd);
909     }
910     object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION,
911                             &error_abort);
912     if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) {
913         return;
914     }
915     sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base);
916     sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
917                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
918 
919     /* PWM */
920     for (i = 0; i < 2; i++) {
921         if (!sysbus_realize(SYS_BUS_DEVICE(&s->pwm[i]), errp)) {
922             return;
923         }
924         sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwm[i]), 0,
925                                 memmap[SIFIVE_U_DEV_PWM0].base + (0x1000 * i));
926 
927         /* Connect PWM interrupts to the PLIC */
928         for (j = 0; j < SIFIVE_PWM_IRQS; j++) {
929             sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwm[i]), j,
930                                qdev_get_gpio_in(DEVICE(s->plic),
931                                         SIFIVE_U_PWM0_IRQ0 + (i * 4) + j));
932         }
933     }
934 
935     create_unimplemented_device("riscv.sifive.u.gem-mgmt",
936         memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
937 
938     create_unimplemented_device("riscv.sifive.u.dmc",
939         memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size);
940 
941     create_unimplemented_device("riscv.sifive.u.l2cc",
942         memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size);
943 
944     sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp);
945     sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0,
946                     memmap[SIFIVE_U_DEV_QSPI0].base);
947     sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
948                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ));
949     sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
950     sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
951                     memmap[SIFIVE_U_DEV_QSPI2].base);
952     sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
953                        qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ));
954 }
955 
956 static Property sifive_u_soc_props[] = {
957     DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL),
958     DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type),
959     DEFINE_PROP_END_OF_LIST()
960 };
961 
962 static void sifive_u_soc_class_init(ObjectClass *oc, void *data)
963 {
964     DeviceClass *dc = DEVICE_CLASS(oc);
965 
966     device_class_set_props(dc, sifive_u_soc_props);
967     dc->realize = sifive_u_soc_realize;
968     /* Reason: Uses serial_hds in realize function, thus can't be used twice */
969     dc->user_creatable = false;
970 }
971 
972 static const TypeInfo sifive_u_soc_type_info = {
973     .name = TYPE_RISCV_U_SOC,
974     .parent = TYPE_DEVICE,
975     .instance_size = sizeof(SiFiveUSoCState),
976     .instance_init = sifive_u_soc_instance_init,
977     .class_init = sifive_u_soc_class_init,
978 };
979 
980 static void sifive_u_soc_register_types(void)
981 {
982     type_register_static(&sifive_u_soc_type_info);
983 }
984 
985 type_init(sifive_u_soc_register_types)
986