1 /* 2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK 3 * 4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu 5 * Copyright (c) 2017 SiFive, Inc. 6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com> 7 * 8 * Provides a board compatible with the SiFive Freedom U SDK: 9 * 10 * 0) UART 11 * 1) CLINT (Core Level Interruptor) 12 * 2) PLIC (Platform Level Interrupt Controller) 13 * 3) PRCI (Power, Reset, Clock, Interrupt) 14 * 4) GPIO (General Purpose Input/Output Controller) 15 * 5) OTP (One-Time Programmable) memory with stored serial number 16 * 6) GEM (Gigabit Ethernet Controller) and management block 17 * 7) DMA (Direct Memory Access Controller) 18 * 19 * This board currently generates devicetree dynamically that indicates at least 20 * two harts and up to five harts. 21 * 22 * This program is free software; you can redistribute it and/or modify it 23 * under the terms and conditions of the GNU General Public License, 24 * version 2 or later, as published by the Free Software Foundation. 25 * 26 * This program is distributed in the hope it will be useful, but WITHOUT 27 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 28 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 29 * more details. 30 * 31 * You should have received a copy of the GNU General Public License along with 32 * this program. If not, see <http://www.gnu.org/licenses/>. 33 */ 34 35 #include "qemu/osdep.h" 36 #include "qemu/log.h" 37 #include "qemu/error-report.h" 38 #include "qapi/error.h" 39 #include "qapi/visitor.h" 40 #include "hw/boards.h" 41 #include "hw/irq.h" 42 #include "hw/loader.h" 43 #include "hw/sysbus.h" 44 #include "hw/char/serial.h" 45 #include "hw/cpu/cluster.h" 46 #include "hw/misc/unimp.h" 47 #include "target/riscv/cpu.h" 48 #include "hw/riscv/riscv_hart.h" 49 #include "hw/riscv/sifive_u.h" 50 #include "hw/riscv/boot.h" 51 #include "hw/char/sifive_uart.h" 52 #include "hw/intc/sifive_clint.h" 53 #include "hw/intc/sifive_plic.h" 54 #include "chardev/char.h" 55 #include "net/eth.h" 56 #include "sysemu/arch_init.h" 57 #include "sysemu/device_tree.h" 58 #include "sysemu/runstate.h" 59 #include "sysemu/sysemu.h" 60 61 #include <libfdt.h> 62 63 #if defined(TARGET_RISCV32) 64 # define BIOS_FILENAME "opensbi-riscv32-generic-fw_dynamic.bin" 65 #else 66 # define BIOS_FILENAME "opensbi-riscv64-generic-fw_dynamic.bin" 67 #endif 68 69 static const struct MemmapEntry { 70 hwaddr base; 71 hwaddr size; 72 } sifive_u_memmap[] = { 73 [SIFIVE_U_DEBUG] = { 0x0, 0x100 }, 74 [SIFIVE_U_MROM] = { 0x1000, 0xf000 }, 75 [SIFIVE_U_CLINT] = { 0x2000000, 0x10000 }, 76 [SIFIVE_U_L2CC] = { 0x2010000, 0x1000 }, 77 [SIFIVE_U_PDMA] = { 0x3000000, 0x100000 }, 78 [SIFIVE_U_L2LIM] = { 0x8000000, 0x2000000 }, 79 [SIFIVE_U_PLIC] = { 0xc000000, 0x4000000 }, 80 [SIFIVE_U_PRCI] = { 0x10000000, 0x1000 }, 81 [SIFIVE_U_UART0] = { 0x10010000, 0x1000 }, 82 [SIFIVE_U_UART1] = { 0x10011000, 0x1000 }, 83 [SIFIVE_U_GPIO] = { 0x10060000, 0x1000 }, 84 [SIFIVE_U_OTP] = { 0x10070000, 0x1000 }, 85 [SIFIVE_U_GEM] = { 0x10090000, 0x2000 }, 86 [SIFIVE_U_GEM_MGMT] = { 0x100a0000, 0x1000 }, 87 [SIFIVE_U_DMC] = { 0x100b0000, 0x10000 }, 88 [SIFIVE_U_FLASH0] = { 0x20000000, 0x10000000 }, 89 [SIFIVE_U_DRAM] = { 0x80000000, 0x0 }, 90 }; 91 92 #define OTP_SERIAL 1 93 #define GEM_REVISION 0x10070109 94 95 static void create_fdt(SiFiveUState *s, const struct MemmapEntry *memmap, 96 uint64_t mem_size, const char *cmdline) 97 { 98 MachineState *ms = MACHINE(qdev_get_machine()); 99 void *fdt; 100 int cpu; 101 uint32_t *cells; 102 char *nodename; 103 char ethclk_names[] = "pclk\0hclk"; 104 uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; 105 uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; 106 107 fdt = s->fdt = create_device_tree(&s->fdt_size); 108 if (!fdt) { 109 error_report("create_device_tree() failed"); 110 exit(1); 111 } 112 113 qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00"); 114 qemu_fdt_setprop_string(fdt, "/", "compatible", 115 "sifive,hifive-unleashed-a00"); 116 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); 117 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); 118 119 qemu_fdt_add_subnode(fdt, "/soc"); 120 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); 121 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); 122 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); 123 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); 124 125 hfclk_phandle = phandle++; 126 nodename = g_strdup_printf("/hfclk"); 127 qemu_fdt_add_subnode(fdt, nodename); 128 qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle); 129 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk"); 130 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 131 SIFIVE_U_HFCLK_FREQ); 132 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 133 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 134 g_free(nodename); 135 136 rtcclk_phandle = phandle++; 137 nodename = g_strdup_printf("/rtcclk"); 138 qemu_fdt_add_subnode(fdt, nodename); 139 qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle); 140 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk"); 141 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 142 SIFIVE_U_RTCCLK_FREQ); 143 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 144 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 145 g_free(nodename); 146 147 nodename = g_strdup_printf("/memory@%lx", 148 (long)memmap[SIFIVE_U_DRAM].base); 149 qemu_fdt_add_subnode(fdt, nodename); 150 qemu_fdt_setprop_cells(fdt, nodename, "reg", 151 memmap[SIFIVE_U_DRAM].base >> 32, memmap[SIFIVE_U_DRAM].base, 152 mem_size >> 32, mem_size); 153 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 154 g_free(nodename); 155 156 qemu_fdt_add_subnode(fdt, "/cpus"); 157 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 158 SIFIVE_CLINT_TIMEBASE_FREQ); 159 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); 160 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); 161 162 for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) { 163 int cpu_phandle = phandle++; 164 nodename = g_strdup_printf("/cpus/cpu@%d", cpu); 165 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 166 char *isa; 167 qemu_fdt_add_subnode(fdt, nodename); 168 /* cpu 0 is the management hart that does not have mmu */ 169 if (cpu != 0) { 170 #if defined(TARGET_RISCV32) 171 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); 172 #else 173 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); 174 #endif 175 isa = riscv_isa_string(&s->soc.u_cpus.harts[cpu - 1]); 176 } else { 177 isa = riscv_isa_string(&s->soc.e_cpus.harts[0]); 178 } 179 qemu_fdt_setprop_string(fdt, nodename, "riscv,isa", isa); 180 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); 181 qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); 182 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); 183 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); 184 qemu_fdt_add_subnode(fdt, intc); 185 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); 186 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); 187 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); 188 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); 189 g_free(isa); 190 g_free(intc); 191 g_free(nodename); 192 } 193 194 cells = g_new0(uint32_t, ms->smp.cpus * 4); 195 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 196 nodename = 197 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 198 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 199 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 200 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); 201 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); 202 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); 203 g_free(nodename); 204 } 205 nodename = g_strdup_printf("/soc/clint@%lx", 206 (long)memmap[SIFIVE_U_CLINT].base); 207 qemu_fdt_add_subnode(fdt, nodename); 208 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,clint0"); 209 qemu_fdt_setprop_cells(fdt, nodename, "reg", 210 0x0, memmap[SIFIVE_U_CLINT].base, 211 0x0, memmap[SIFIVE_U_CLINT].size); 212 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 213 cells, ms->smp.cpus * sizeof(uint32_t) * 4); 214 g_free(cells); 215 g_free(nodename); 216 217 nodename = g_strdup_printf("/soc/otp@%lx", 218 (long)memmap[SIFIVE_U_OTP].base); 219 qemu_fdt_add_subnode(fdt, nodename); 220 qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE); 221 qemu_fdt_setprop_cells(fdt, nodename, "reg", 222 0x0, memmap[SIFIVE_U_OTP].base, 223 0x0, memmap[SIFIVE_U_OTP].size); 224 qemu_fdt_setprop_string(fdt, nodename, "compatible", 225 "sifive,fu540-c000-otp"); 226 g_free(nodename); 227 228 prci_phandle = phandle++; 229 nodename = g_strdup_printf("/soc/clock-controller@%lx", 230 (long)memmap[SIFIVE_U_PRCI].base); 231 qemu_fdt_add_subnode(fdt, nodename); 232 qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle); 233 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1); 234 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 235 hfclk_phandle, rtcclk_phandle); 236 qemu_fdt_setprop_cells(fdt, nodename, "reg", 237 0x0, memmap[SIFIVE_U_PRCI].base, 238 0x0, memmap[SIFIVE_U_PRCI].size); 239 qemu_fdt_setprop_string(fdt, nodename, "compatible", 240 "sifive,fu540-c000-prci"); 241 g_free(nodename); 242 243 plic_phandle = phandle++; 244 cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2); 245 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 246 nodename = 247 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 248 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 249 /* cpu 0 is the management hart that does not have S-mode */ 250 if (cpu == 0) { 251 cells[0] = cpu_to_be32(intc_phandle); 252 cells[1] = cpu_to_be32(IRQ_M_EXT); 253 } else { 254 cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle); 255 cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT); 256 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 257 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT); 258 } 259 g_free(nodename); 260 } 261 nodename = g_strdup_printf("/soc/interrupt-controller@%lx", 262 (long)memmap[SIFIVE_U_PLIC].base); 263 qemu_fdt_add_subnode(fdt, nodename); 264 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); 265 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv,plic0"); 266 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 267 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 268 cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t)); 269 qemu_fdt_setprop_cells(fdt, nodename, "reg", 270 0x0, memmap[SIFIVE_U_PLIC].base, 271 0x0, memmap[SIFIVE_U_PLIC].size); 272 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 0x35); 273 qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); 274 plic_phandle = qemu_fdt_get_phandle(fdt, nodename); 275 g_free(cells); 276 g_free(nodename); 277 278 gpio_phandle = phandle++; 279 nodename = g_strdup_printf("/soc/gpio@%lx", 280 (long)memmap[SIFIVE_U_GPIO].base); 281 qemu_fdt_add_subnode(fdt, nodename); 282 qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle); 283 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 284 prci_phandle, PRCI_CLK_TLCLK); 285 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2); 286 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 287 qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2); 288 qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0); 289 qemu_fdt_setprop_cells(fdt, nodename, "reg", 290 0x0, memmap[SIFIVE_U_GPIO].base, 291 0x0, memmap[SIFIVE_U_GPIO].size); 292 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0, 293 SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3, 294 SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6, 295 SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9, 296 SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12, 297 SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15); 298 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 299 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0"); 300 g_free(nodename); 301 302 nodename = g_strdup_printf("/gpio-restart"); 303 qemu_fdt_add_subnode(fdt, nodename); 304 qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1); 305 qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart"); 306 g_free(nodename); 307 308 nodename = g_strdup_printf("/soc/dma@%lx", 309 (long)memmap[SIFIVE_U_PDMA].base); 310 qemu_fdt_add_subnode(fdt, nodename); 311 qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1); 312 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 313 SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2, 314 SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5, 315 SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7); 316 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 317 qemu_fdt_setprop_cells(fdt, nodename, "reg", 318 0x0, memmap[SIFIVE_U_PDMA].base, 319 0x0, memmap[SIFIVE_U_PDMA].size); 320 qemu_fdt_setprop_string(fdt, nodename, "compatible", 321 "sifive,fu540-c000-pdma"); 322 g_free(nodename); 323 324 nodename = g_strdup_printf("/soc/cache-controller@%lx", 325 (long)memmap[SIFIVE_U_L2CC].base); 326 qemu_fdt_add_subnode(fdt, nodename); 327 qemu_fdt_setprop_cells(fdt, nodename, "reg", 328 0x0, memmap[SIFIVE_U_L2CC].base, 329 0x0, memmap[SIFIVE_U_L2CC].size); 330 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 331 SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2); 332 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 333 qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0); 334 qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152); 335 qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024); 336 qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2); 337 qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64); 338 qemu_fdt_setprop_string(fdt, nodename, "compatible", 339 "sifive,fu540-c000-ccache"); 340 g_free(nodename); 341 342 phy_phandle = phandle++; 343 nodename = g_strdup_printf("/soc/ethernet@%lx", 344 (long)memmap[SIFIVE_U_GEM].base); 345 qemu_fdt_add_subnode(fdt, nodename); 346 qemu_fdt_setprop_string(fdt, nodename, "compatible", 347 "sifive,fu540-c000-gem"); 348 qemu_fdt_setprop_cells(fdt, nodename, "reg", 349 0x0, memmap[SIFIVE_U_GEM].base, 350 0x0, memmap[SIFIVE_U_GEM].size, 351 0x0, memmap[SIFIVE_U_GEM_MGMT].base, 352 0x0, memmap[SIFIVE_U_GEM_MGMT].size); 353 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); 354 qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii"); 355 qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle); 356 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 357 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ); 358 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 359 prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL); 360 qemu_fdt_setprop(fdt, nodename, "clock-names", ethclk_names, 361 sizeof(ethclk_names)); 362 qemu_fdt_setprop(fdt, nodename, "local-mac-address", 363 s->soc.gem.conf.macaddr.a, ETH_ALEN); 364 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); 365 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); 366 367 qemu_fdt_add_subnode(fdt, "/aliases"); 368 qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename); 369 370 g_free(nodename); 371 372 nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0", 373 (long)memmap[SIFIVE_U_GEM].base); 374 qemu_fdt_add_subnode(fdt, nodename); 375 qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle); 376 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0); 377 g_free(nodename); 378 379 nodename = g_strdup_printf("/soc/serial@%lx", 380 (long)memmap[SIFIVE_U_UART0].base); 381 qemu_fdt_add_subnode(fdt, nodename); 382 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); 383 qemu_fdt_setprop_cells(fdt, nodename, "reg", 384 0x0, memmap[SIFIVE_U_UART0].base, 385 0x0, memmap[SIFIVE_U_UART0].size); 386 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 387 prci_phandle, PRCI_CLK_TLCLK); 388 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 389 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); 390 391 qemu_fdt_add_subnode(fdt, "/chosen"); 392 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); 393 if (cmdline) { 394 qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", cmdline); 395 } 396 397 qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); 398 399 g_free(nodename); 400 } 401 402 static void sifive_u_machine_reset(void *opaque, int n, int level) 403 { 404 /* gpio pin active low triggers reset */ 405 if (!level) { 406 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 407 } 408 } 409 410 static void sifive_u_machine_init(MachineState *machine) 411 { 412 const struct MemmapEntry *memmap = sifive_u_memmap; 413 SiFiveUState *s = RISCV_U_MACHINE(machine); 414 MemoryRegion *system_memory = get_system_memory(); 415 MemoryRegion *main_mem = g_new(MemoryRegion, 1); 416 MemoryRegion *flash0 = g_new(MemoryRegion, 1); 417 target_ulong start_addr = memmap[SIFIVE_U_DRAM].base; 418 uint32_t start_addr_hi32 = 0x00000000; 419 int i; 420 uint32_t fdt_load_addr; 421 uint64_t kernel_entry; 422 423 /* Initialize SoC */ 424 object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC); 425 object_property_set_uint(OBJECT(&s->soc), "serial", s->serial, 426 &error_abort); 427 qdev_realize(DEVICE(&s->soc), NULL, &error_abort); 428 429 /* register RAM */ 430 memory_region_init_ram(main_mem, NULL, "riscv.sifive.u.ram", 431 machine->ram_size, &error_fatal); 432 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DRAM].base, 433 main_mem); 434 435 /* register QSPI0 Flash */ 436 memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0", 437 memmap[SIFIVE_U_FLASH0].size, &error_fatal); 438 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_FLASH0].base, 439 flash0); 440 441 /* register gpio-restart */ 442 qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10, 443 qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); 444 445 /* create device tree */ 446 create_fdt(s, memmap, machine->ram_size, machine->kernel_cmdline); 447 448 if (s->start_in_flash) { 449 /* 450 * If start_in_flash property is given, assign s->msel to a value 451 * that representing booting from QSPI0 memory-mapped flash. 452 * 453 * This also means that when both start_in_flash and msel properties 454 * are given, start_in_flash takes the precedence over msel. 455 * 456 * Note this is to keep backward compatibility not to break existing 457 * users that use start_in_flash property. 458 */ 459 s->msel = MSEL_MEMMAP_QSPI0_FLASH; 460 } 461 462 switch (s->msel) { 463 case MSEL_MEMMAP_QSPI0_FLASH: 464 start_addr = memmap[SIFIVE_U_FLASH0].base; 465 break; 466 case MSEL_L2LIM_QSPI0_FLASH: 467 case MSEL_L2LIM_QSPI2_SD: 468 start_addr = memmap[SIFIVE_U_L2LIM].base; 469 break; 470 default: 471 start_addr = memmap[SIFIVE_U_DRAM].base; 472 break; 473 } 474 475 riscv_find_and_load_firmware(machine, BIOS_FILENAME, start_addr, NULL); 476 477 if (machine->kernel_filename) { 478 kernel_entry = riscv_load_kernel(machine->kernel_filename, NULL); 479 480 if (machine->initrd_filename) { 481 hwaddr start; 482 hwaddr end = riscv_load_initrd(machine->initrd_filename, 483 machine->ram_size, kernel_entry, 484 &start); 485 qemu_fdt_setprop_cell(s->fdt, "/chosen", 486 "linux,initrd-start", start); 487 qemu_fdt_setprop_cell(s->fdt, "/chosen", "linux,initrd-end", 488 end); 489 } 490 } else { 491 /* 492 * If dynamic firmware is used, it doesn't know where is the next mode 493 * if kernel argument is not set. 494 */ 495 kernel_entry = 0; 496 } 497 498 /* Compute the fdt load address in dram */ 499 fdt_load_addr = riscv_load_fdt(memmap[SIFIVE_U_DRAM].base, 500 machine->ram_size, s->fdt); 501 #if defined(TARGET_RISCV64) 502 start_addr_hi32 = start_addr >> 32; 503 #endif 504 505 /* reset vector */ 506 uint32_t reset_vec[11] = { 507 s->msel, /* MSEL pin state */ 508 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 509 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 510 0xf1402573, /* csrr a0, mhartid */ 511 #if defined(TARGET_RISCV32) 512 0x0202a583, /* lw a1, 32(t0) */ 513 0x0182a283, /* lw t0, 24(t0) */ 514 #elif defined(TARGET_RISCV64) 515 0x0202b583, /* ld a1, 32(t0) */ 516 0x0182b283, /* ld t0, 24(t0) */ 517 #endif 518 0x00028067, /* jr t0 */ 519 start_addr, /* start: .dword */ 520 start_addr_hi32, 521 fdt_load_addr, /* fdt_laddr: .dword */ 522 0x00000000, 523 /* fw_dyn: */ 524 }; 525 526 /* copy in the reset vector in little_endian byte order */ 527 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { 528 reset_vec[i] = cpu_to_le32(reset_vec[i]); 529 } 530 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 531 memmap[SIFIVE_U_MROM].base, &address_space_memory); 532 533 riscv_rom_copy_firmware_info(memmap[SIFIVE_U_MROM].base, 534 memmap[SIFIVE_U_MROM].size, 535 sizeof(reset_vec), kernel_entry); 536 } 537 538 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp) 539 { 540 SiFiveUState *s = RISCV_U_MACHINE(obj); 541 542 return s->start_in_flash; 543 } 544 545 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp) 546 { 547 SiFiveUState *s = RISCV_U_MACHINE(obj); 548 549 s->start_in_flash = value; 550 } 551 552 static void sifive_u_machine_get_uint32_prop(Object *obj, Visitor *v, 553 const char *name, void *opaque, 554 Error **errp) 555 { 556 visit_type_uint32(v, name, (uint32_t *)opaque, errp); 557 } 558 559 static void sifive_u_machine_set_uint32_prop(Object *obj, Visitor *v, 560 const char *name, void *opaque, 561 Error **errp) 562 { 563 visit_type_uint32(v, name, (uint32_t *)opaque, errp); 564 } 565 566 static void sifive_u_machine_instance_init(Object *obj) 567 { 568 SiFiveUState *s = RISCV_U_MACHINE(obj); 569 570 s->start_in_flash = false; 571 object_property_add_bool(obj, "start-in-flash", 572 sifive_u_machine_get_start_in_flash, 573 sifive_u_machine_set_start_in_flash); 574 object_property_set_description(obj, "start-in-flash", 575 "Set on to tell QEMU's ROM to jump to " 576 "flash. Otherwise QEMU will jump to DRAM " 577 "or L2LIM depending on the msel value"); 578 579 s->msel = 0; 580 object_property_add(obj, "msel", "uint32", 581 sifive_u_machine_get_uint32_prop, 582 sifive_u_machine_set_uint32_prop, NULL, &s->msel); 583 object_property_set_description(obj, "msel", 584 "Mode Select (MSEL[3:0]) pin state"); 585 586 s->serial = OTP_SERIAL; 587 object_property_add(obj, "serial", "uint32", 588 sifive_u_machine_get_uint32_prop, 589 sifive_u_machine_set_uint32_prop, NULL, &s->serial); 590 object_property_set_description(obj, "serial", "Board serial number"); 591 } 592 593 static void sifive_u_machine_class_init(ObjectClass *oc, void *data) 594 { 595 MachineClass *mc = MACHINE_CLASS(oc); 596 597 mc->desc = "RISC-V Board compatible with SiFive U SDK"; 598 mc->init = sifive_u_machine_init; 599 mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT; 600 mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1; 601 mc->default_cpus = mc->min_cpus; 602 } 603 604 static const TypeInfo sifive_u_machine_typeinfo = { 605 .name = MACHINE_TYPE_NAME("sifive_u"), 606 .parent = TYPE_MACHINE, 607 .class_init = sifive_u_machine_class_init, 608 .instance_init = sifive_u_machine_instance_init, 609 .instance_size = sizeof(SiFiveUState), 610 }; 611 612 static void sifive_u_machine_init_register_types(void) 613 { 614 type_register_static(&sifive_u_machine_typeinfo); 615 } 616 617 type_init(sifive_u_machine_init_register_types) 618 619 static void sifive_u_soc_instance_init(Object *obj) 620 { 621 MachineState *ms = MACHINE(qdev_get_machine()); 622 SiFiveUSoCState *s = RISCV_U_SOC(obj); 623 624 object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER); 625 qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0); 626 627 object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus, 628 TYPE_RISCV_HART_ARRAY); 629 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); 630 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); 631 qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU); 632 qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004); 633 634 object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); 635 qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); 636 637 object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus, 638 TYPE_RISCV_HART_ARRAY); 639 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); 640 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); 641 qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", SIFIVE_U_CPU); 642 qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004); 643 644 object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI); 645 object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); 646 object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM); 647 object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO); 648 object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA); 649 } 650 651 static void sifive_u_soc_realize(DeviceState *dev, Error **errp) 652 { 653 MachineState *ms = MACHINE(qdev_get_machine()); 654 SiFiveUSoCState *s = RISCV_U_SOC(dev); 655 const struct MemmapEntry *memmap = sifive_u_memmap; 656 MemoryRegion *system_memory = get_system_memory(); 657 MemoryRegion *mask_rom = g_new(MemoryRegion, 1); 658 MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1); 659 char *plic_hart_config; 660 size_t plic_hart_config_len; 661 int i; 662 NICInfo *nd = &nd_table[0]; 663 664 sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_abort); 665 sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_abort); 666 /* 667 * The cluster must be realized after the RISC-V hart array container, 668 * as the container's CPU object is only created on realize, and the 669 * CPU must exist and have been parented into the cluster before the 670 * cluster is realized. 671 */ 672 qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort); 673 qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort); 674 675 /* boot rom */ 676 memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom", 677 memmap[SIFIVE_U_MROM].size, &error_fatal); 678 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_MROM].base, 679 mask_rom); 680 681 /* 682 * Add L2-LIM at reset size. 683 * This should be reduced in size as the L2 Cache Controller WayEnable 684 * register is incremented. Unfortunately I don't see a nice (or any) way 685 * to handle reducing or blocking out the L2 LIM while still allowing it 686 * be re returned to all enabled after a reset. For the time being, just 687 * leave it enabled all the time. This won't break anything, but will be 688 * too generous to misbehaving guests. 689 */ 690 memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim", 691 memmap[SIFIVE_U_L2LIM].size, &error_fatal); 692 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_L2LIM].base, 693 l2lim_mem); 694 695 /* create PLIC hart topology configuration string */ 696 plic_hart_config_len = (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1) * 697 ms->smp.cpus; 698 plic_hart_config = g_malloc0(plic_hart_config_len); 699 for (i = 0; i < ms->smp.cpus; i++) { 700 if (i != 0) { 701 strncat(plic_hart_config, "," SIFIVE_U_PLIC_HART_CONFIG, 702 plic_hart_config_len); 703 } else { 704 strncat(plic_hart_config, "M", plic_hart_config_len); 705 } 706 plic_hart_config_len -= (strlen(SIFIVE_U_PLIC_HART_CONFIG) + 1); 707 } 708 709 /* MMIO */ 710 s->plic = sifive_plic_create(memmap[SIFIVE_U_PLIC].base, 711 plic_hart_config, 0, 712 SIFIVE_U_PLIC_NUM_SOURCES, 713 SIFIVE_U_PLIC_NUM_PRIORITIES, 714 SIFIVE_U_PLIC_PRIORITY_BASE, 715 SIFIVE_U_PLIC_PENDING_BASE, 716 SIFIVE_U_PLIC_ENABLE_BASE, 717 SIFIVE_U_PLIC_ENABLE_STRIDE, 718 SIFIVE_U_PLIC_CONTEXT_BASE, 719 SIFIVE_U_PLIC_CONTEXT_STRIDE, 720 memmap[SIFIVE_U_PLIC].size); 721 g_free(plic_hart_config); 722 sifive_uart_create(system_memory, memmap[SIFIVE_U_UART0].base, 723 serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ)); 724 sifive_uart_create(system_memory, memmap[SIFIVE_U_UART1].base, 725 serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ)); 726 sifive_clint_create(memmap[SIFIVE_U_CLINT].base, 727 memmap[SIFIVE_U_CLINT].size, 0, ms->smp.cpus, 728 SIFIVE_SIP_BASE, SIFIVE_TIMECMP_BASE, SIFIVE_TIME_BASE, 729 SIFIVE_CLINT_TIMEBASE_FREQ, false); 730 731 if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) { 732 return; 733 } 734 sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_PRCI].base); 735 736 qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16); 737 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) { 738 return; 739 } 740 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_GPIO].base); 741 742 /* Pass all GPIOs to the SOC layer so they are available to the board */ 743 qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL); 744 745 /* Connect GPIO interrupts to the PLIC */ 746 for (i = 0; i < 16; i++) { 747 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i, 748 qdev_get_gpio_in(DEVICE(s->plic), 749 SIFIVE_U_GPIO_IRQ0 + i)); 750 } 751 752 /* PDMA */ 753 sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp); 754 sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_PDMA].base); 755 756 /* Connect PDMA interrupts to the PLIC */ 757 for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { 758 sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i, 759 qdev_get_gpio_in(DEVICE(s->plic), 760 SIFIVE_U_PDMA_IRQ0 + i)); 761 } 762 763 qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial); 764 if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) { 765 return; 766 } 767 sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_OTP].base); 768 769 /* FIXME use qdev NIC properties instead of nd_table[] */ 770 if (nd->used) { 771 qemu_check_nic_model(nd, TYPE_CADENCE_GEM); 772 qdev_set_nic_properties(DEVICE(&s->gem), nd); 773 } 774 object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION, 775 &error_abort); 776 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) { 777 return; 778 } 779 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_GEM].base); 780 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0, 781 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ)); 782 783 create_unimplemented_device("riscv.sifive.u.gem-mgmt", 784 memmap[SIFIVE_U_GEM_MGMT].base, memmap[SIFIVE_U_GEM_MGMT].size); 785 786 create_unimplemented_device("riscv.sifive.u.dmc", 787 memmap[SIFIVE_U_DMC].base, memmap[SIFIVE_U_DMC].size); 788 789 create_unimplemented_device("riscv.sifive.u.l2cc", 790 memmap[SIFIVE_U_L2CC].base, memmap[SIFIVE_U_L2CC].size); 791 } 792 793 static Property sifive_u_soc_props[] = { 794 DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL), 795 DEFINE_PROP_END_OF_LIST() 796 }; 797 798 static void sifive_u_soc_class_init(ObjectClass *oc, void *data) 799 { 800 DeviceClass *dc = DEVICE_CLASS(oc); 801 802 device_class_set_props(dc, sifive_u_soc_props); 803 dc->realize = sifive_u_soc_realize; 804 /* Reason: Uses serial_hds in realize function, thus can't be used twice */ 805 dc->user_creatable = false; 806 } 807 808 static const TypeInfo sifive_u_soc_type_info = { 809 .name = TYPE_RISCV_U_SOC, 810 .parent = TYPE_DEVICE, 811 .instance_size = sizeof(SiFiveUSoCState), 812 .instance_init = sifive_u_soc_instance_init, 813 .class_init = sifive_u_soc_class_init, 814 }; 815 816 static void sifive_u_soc_register_types(void) 817 { 818 type_register_static(&sifive_u_soc_type_info); 819 } 820 821 type_init(sifive_u_soc_register_types) 822