1 /*
2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK
3 *
4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu
5 * Copyright (c) 2017 SiFive, Inc.
6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com>
7 *
8 * Provides a board compatible with the SiFive Freedom U SDK:
9 *
10 * 0) UART
11 * 1) CLINT (Core Level Interruptor)
12 * 2) PLIC (Platform Level Interrupt Controller)
13 * 3) PRCI (Power, Reset, Clock, Interrupt)
14 * 4) GPIO (General Purpose Input/Output Controller)
15 * 5) OTP (One-Time Programmable) memory with stored serial number
16 * 6) GEM (Gigabit Ethernet Controller) and management block
17 * 7) DMA (Direct Memory Access Controller)
18 * 8) SPI0 connected to an SPI flash
19 * 9) SPI2 connected to an SD card
20 * 10) PWM0 and PWM1
21 *
22 * This board currently generates devicetree dynamically that indicates at least
23 * two harts and up to five harts.
24 *
25 * This program is free software; you can redistribute it and/or modify it
26 * under the terms and conditions of the GNU General Public License,
27 * version 2 or later, as published by the Free Software Foundation.
28 *
29 * This program is distributed in the hope it will be useful, but WITHOUT
30 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
31 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
32 * more details.
33 *
34 * You should have received a copy of the GNU General Public License along with
35 * this program. If not, see <http://www.gnu.org/licenses/>.
36 */
37
38 #include "qemu/osdep.h"
39 #include "qemu/error-report.h"
40 #include "qapi/error.h"
41 #include "qapi/visitor.h"
42 #include "hw/boards.h"
43 #include "hw/irq.h"
44 #include "hw/loader.h"
45 #include "hw/sysbus.h"
46 #include "hw/char/serial.h"
47 #include "hw/cpu/cluster.h"
48 #include "hw/misc/unimp.h"
49 #include "hw/sd/sd.h"
50 #include "hw/ssi/ssi.h"
51 #include "target/riscv/cpu.h"
52 #include "hw/riscv/riscv_hart.h"
53 #include "hw/riscv/sifive_u.h"
54 #include "hw/riscv/boot.h"
55 #include "hw/char/sifive_uart.h"
56 #include "hw/intc/riscv_aclint.h"
57 #include "hw/intc/sifive_plic.h"
58 #include "chardev/char.h"
59 #include "net/eth.h"
60 #include "sysemu/device_tree.h"
61 #include "sysemu/runstate.h"
62 #include "sysemu/sysemu.h"
63
64 #include <libfdt.h>
65
66 /* CLINT timebase frequency */
67 #define CLINT_TIMEBASE_FREQ 1000000
68
69 static const MemMapEntry sifive_u_memmap[] = {
70 [SIFIVE_U_DEV_DEBUG] = { 0x0, 0x100 },
71 [SIFIVE_U_DEV_MROM] = { 0x1000, 0xf000 },
72 [SIFIVE_U_DEV_CLINT] = { 0x2000000, 0x10000 },
73 [SIFIVE_U_DEV_L2CC] = { 0x2010000, 0x1000 },
74 [SIFIVE_U_DEV_PDMA] = { 0x3000000, 0x100000 },
75 [SIFIVE_U_DEV_L2LIM] = { 0x8000000, 0x2000000 },
76 [SIFIVE_U_DEV_PLIC] = { 0xc000000, 0x4000000 },
77 [SIFIVE_U_DEV_PRCI] = { 0x10000000, 0x1000 },
78 [SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 },
79 [SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 },
80 [SIFIVE_U_DEV_PWM0] = { 0x10020000, 0x1000 },
81 [SIFIVE_U_DEV_PWM1] = { 0x10021000, 0x1000 },
82 [SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 },
83 [SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 },
84 [SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 },
85 [SIFIVE_U_DEV_OTP] = { 0x10070000, 0x1000 },
86 [SIFIVE_U_DEV_GEM] = { 0x10090000, 0x2000 },
87 [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000, 0x1000 },
88 [SIFIVE_U_DEV_DMC] = { 0x100b0000, 0x10000 },
89 [SIFIVE_U_DEV_FLASH0] = { 0x20000000, 0x10000000 },
90 [SIFIVE_U_DEV_DRAM] = { 0x80000000, 0x0 },
91 };
92
93 #define OTP_SERIAL 1
94 #define GEM_REVISION 0x10070109
95
create_fdt(SiFiveUState * s,const MemMapEntry * memmap,bool is_32_bit)96 static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap,
97 bool is_32_bit)
98 {
99 MachineState *ms = MACHINE(s);
100 uint64_t mem_size = ms->ram_size;
101 void *fdt;
102 int cpu;
103 uint32_t *cells;
104 char *nodename;
105 uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1;
106 uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle;
107 static const char * const ethclk_names[2] = { "pclk", "hclk" };
108 static const char * const clint_compat[2] = {
109 "sifive,clint0", "riscv,clint0"
110 };
111 static const char * const plic_compat[2] = {
112 "sifive,plic-1.0.0", "riscv,plic0"
113 };
114
115 fdt = ms->fdt = create_device_tree(&s->fdt_size);
116 if (!fdt) {
117 error_report("create_device_tree() failed");
118 exit(1);
119 }
120
121 qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00");
122 qemu_fdt_setprop_string(fdt, "/", "compatible",
123 "sifive,hifive-unleashed-a00");
124 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2);
125 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2);
126
127 qemu_fdt_add_subnode(fdt, "/soc");
128 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0);
129 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus");
130 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2);
131 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2);
132
133 hfclk_phandle = phandle++;
134 nodename = g_strdup_printf("/hfclk");
135 qemu_fdt_add_subnode(fdt, nodename);
136 qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle);
137 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk");
138 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
139 SIFIVE_U_HFCLK_FREQ);
140 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
141 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
142 g_free(nodename);
143
144 rtcclk_phandle = phandle++;
145 nodename = g_strdup_printf("/rtcclk");
146 qemu_fdt_add_subnode(fdt, nodename);
147 qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle);
148 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk");
149 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency",
150 SIFIVE_U_RTCCLK_FREQ);
151 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock");
152 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0);
153 g_free(nodename);
154
155 nodename = g_strdup_printf("/memory@%lx",
156 (long)memmap[SIFIVE_U_DEV_DRAM].base);
157 qemu_fdt_add_subnode(fdt, nodename);
158 qemu_fdt_setprop_cells(fdt, nodename, "reg",
159 memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base,
160 mem_size >> 32, mem_size);
161 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory");
162 g_free(nodename);
163
164 qemu_fdt_add_subnode(fdt, "/cpus");
165 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency",
166 CLINT_TIMEBASE_FREQ);
167 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0);
168 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1);
169
170 for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) {
171 int cpu_phandle = phandle++;
172 nodename = g_strdup_printf("/cpus/cpu@%d", cpu);
173 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
174 qemu_fdt_add_subnode(fdt, nodename);
175 /* cpu 0 is the management hart that does not have mmu */
176 if (cpu != 0) {
177 if (is_32_bit) {
178 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32");
179 } else {
180 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48");
181 }
182 riscv_isa_write_fdt(&s->soc.u_cpus.harts[cpu - 1], fdt, nodename);
183 } else {
184 riscv_isa_write_fdt(&s->soc.e_cpus.harts[0], fdt, nodename);
185 }
186 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv");
187 qemu_fdt_setprop_string(fdt, nodename, "status", "okay");
188 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu);
189 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu");
190 qemu_fdt_add_subnode(fdt, intc);
191 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle);
192 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc");
193 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0);
194 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1);
195 g_free(intc);
196 g_free(nodename);
197 }
198
199 cells = g_new0(uint32_t, ms->smp.cpus * 4);
200 for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
201 nodename =
202 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
203 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
204 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
205 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT);
206 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle);
207 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER);
208 g_free(nodename);
209 }
210 nodename = g_strdup_printf("/soc/clint@%lx",
211 (long)memmap[SIFIVE_U_DEV_CLINT].base);
212 qemu_fdt_add_subnode(fdt, nodename);
213 qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
214 (char **)&clint_compat, ARRAY_SIZE(clint_compat));
215 qemu_fdt_setprop_cells(fdt, nodename, "reg",
216 0x0, memmap[SIFIVE_U_DEV_CLINT].base,
217 0x0, memmap[SIFIVE_U_DEV_CLINT].size);
218 qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
219 cells, ms->smp.cpus * sizeof(uint32_t) * 4);
220 g_free(cells);
221 g_free(nodename);
222
223 nodename = g_strdup_printf("/soc/otp@%lx",
224 (long)memmap[SIFIVE_U_DEV_OTP].base);
225 qemu_fdt_add_subnode(fdt, nodename);
226 qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE);
227 qemu_fdt_setprop_cells(fdt, nodename, "reg",
228 0x0, memmap[SIFIVE_U_DEV_OTP].base,
229 0x0, memmap[SIFIVE_U_DEV_OTP].size);
230 qemu_fdt_setprop_string(fdt, nodename, "compatible",
231 "sifive,fu540-c000-otp");
232 g_free(nodename);
233
234 prci_phandle = phandle++;
235 nodename = g_strdup_printf("/soc/clock-controller@%lx",
236 (long)memmap[SIFIVE_U_DEV_PRCI].base);
237 qemu_fdt_add_subnode(fdt, nodename);
238 qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle);
239 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1);
240 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
241 hfclk_phandle, rtcclk_phandle);
242 qemu_fdt_setprop_cells(fdt, nodename, "reg",
243 0x0, memmap[SIFIVE_U_DEV_PRCI].base,
244 0x0, memmap[SIFIVE_U_DEV_PRCI].size);
245 qemu_fdt_setprop_string(fdt, nodename, "compatible",
246 "sifive,fu540-c000-prci");
247 g_free(nodename);
248
249 plic_phandle = phandle++;
250 cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2);
251 for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
252 nodename =
253 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu);
254 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename);
255 /* cpu 0 is the management hart that does not have S-mode */
256 if (cpu == 0) {
257 cells[0] = cpu_to_be32(intc_phandle);
258 cells[1] = cpu_to_be32(IRQ_M_EXT);
259 } else {
260 cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle);
261 cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT);
262 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle);
263 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT);
264 }
265 g_free(nodename);
266 }
267 nodename = g_strdup_printf("/soc/interrupt-controller@%lx",
268 (long)memmap[SIFIVE_U_DEV_PLIC].base);
269 qemu_fdt_add_subnode(fdt, nodename);
270 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1);
271 qemu_fdt_setprop_string_array(fdt, nodename, "compatible",
272 (char **)&plic_compat, ARRAY_SIZE(plic_compat));
273 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
274 qemu_fdt_setprop(fdt, nodename, "interrupts-extended",
275 cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t));
276 qemu_fdt_setprop_cells(fdt, nodename, "reg",
277 0x0, memmap[SIFIVE_U_DEV_PLIC].base,
278 0x0, memmap[SIFIVE_U_DEV_PLIC].size);
279 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev",
280 SIFIVE_U_PLIC_NUM_SOURCES - 1);
281 qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle);
282 plic_phandle = qemu_fdt_get_phandle(fdt, nodename);
283 g_free(cells);
284 g_free(nodename);
285
286 gpio_phandle = phandle++;
287 nodename = g_strdup_printf("/soc/gpio@%lx",
288 (long)memmap[SIFIVE_U_DEV_GPIO].base);
289 qemu_fdt_add_subnode(fdt, nodename);
290 qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle);
291 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
292 prci_phandle, PRCI_CLK_TLCLK);
293 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2);
294 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0);
295 qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2);
296 qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0);
297 qemu_fdt_setprop_cells(fdt, nodename, "reg",
298 0x0, memmap[SIFIVE_U_DEV_GPIO].base,
299 0x0, memmap[SIFIVE_U_DEV_GPIO].size);
300 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0,
301 SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3,
302 SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6,
303 SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9,
304 SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12,
305 SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15);
306 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
307 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0");
308 g_free(nodename);
309
310 nodename = g_strdup_printf("/gpio-restart");
311 qemu_fdt_add_subnode(fdt, nodename);
312 qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1);
313 qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart");
314 g_free(nodename);
315
316 nodename = g_strdup_printf("/soc/dma@%lx",
317 (long)memmap[SIFIVE_U_DEV_PDMA].base);
318 qemu_fdt_add_subnode(fdt, nodename);
319 qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1);
320 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
321 SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2,
322 SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5,
323 SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7);
324 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
325 qemu_fdt_setprop_cells(fdt, nodename, "reg",
326 0x0, memmap[SIFIVE_U_DEV_PDMA].base,
327 0x0, memmap[SIFIVE_U_DEV_PDMA].size);
328 qemu_fdt_setprop_string(fdt, nodename, "compatible",
329 "sifive,fu540-c000-pdma");
330 g_free(nodename);
331
332 nodename = g_strdup_printf("/soc/cache-controller@%lx",
333 (long)memmap[SIFIVE_U_DEV_L2CC].base);
334 qemu_fdt_add_subnode(fdt, nodename);
335 qemu_fdt_setprop_cells(fdt, nodename, "reg",
336 0x0, memmap[SIFIVE_U_DEV_L2CC].base,
337 0x0, memmap[SIFIVE_U_DEV_L2CC].size);
338 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
339 SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2);
340 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
341 qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0);
342 qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152);
343 qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024);
344 qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2);
345 qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64);
346 qemu_fdt_setprop_string(fdt, nodename, "compatible",
347 "sifive,fu540-c000-ccache");
348 g_free(nodename);
349
350 nodename = g_strdup_printf("/soc/spi@%lx",
351 (long)memmap[SIFIVE_U_DEV_QSPI2].base);
352 qemu_fdt_add_subnode(fdt, nodename);
353 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
354 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
355 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
356 prci_phandle, PRCI_CLK_TLCLK);
357 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ);
358 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
359 qemu_fdt_setprop_cells(fdt, nodename, "reg",
360 0x0, memmap[SIFIVE_U_DEV_QSPI2].base,
361 0x0, memmap[SIFIVE_U_DEV_QSPI2].size);
362 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
363 g_free(nodename);
364
365 nodename = g_strdup_printf("/soc/spi@%lx/mmc@0",
366 (long)memmap[SIFIVE_U_DEV_QSPI2].base);
367 qemu_fdt_add_subnode(fdt, nodename);
368 qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0);
369 qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300);
370 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000);
371 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
372 qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot");
373 g_free(nodename);
374
375 nodename = g_strdup_printf("/soc/spi@%lx",
376 (long)memmap[SIFIVE_U_DEV_QSPI0].base);
377 qemu_fdt_add_subnode(fdt, nodename);
378 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
379 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
380 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
381 prci_phandle, PRCI_CLK_TLCLK);
382 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ);
383 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
384 qemu_fdt_setprop_cells(fdt, nodename, "reg",
385 0x0, memmap[SIFIVE_U_DEV_QSPI0].base,
386 0x0, memmap[SIFIVE_U_DEV_QSPI0].size);
387 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0");
388 g_free(nodename);
389
390 nodename = g_strdup_printf("/soc/spi@%lx/flash@0",
391 (long)memmap[SIFIVE_U_DEV_QSPI0].base);
392 qemu_fdt_add_subnode(fdt, nodename);
393 qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4);
394 qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4);
395 qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0);
396 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000);
397 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0);
398 qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor");
399 g_free(nodename);
400
401 phy_phandle = phandle++;
402 nodename = g_strdup_printf("/soc/ethernet@%lx",
403 (long)memmap[SIFIVE_U_DEV_GEM].base);
404 qemu_fdt_add_subnode(fdt, nodename);
405 qemu_fdt_setprop_string(fdt, nodename, "compatible",
406 "sifive,fu540-c000-gem");
407 qemu_fdt_setprop_cells(fdt, nodename, "reg",
408 0x0, memmap[SIFIVE_U_DEV_GEM].base,
409 0x0, memmap[SIFIVE_U_DEV_GEM].size,
410 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base,
411 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
412 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control");
413 qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii");
414 qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle);
415 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
416 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ);
417 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
418 prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL);
419 qemu_fdt_setprop_string_array(fdt, nodename, "clock-names",
420 (char **)ðclk_names, ARRAY_SIZE(ethclk_names));
421 qemu_fdt_setprop(fdt, nodename, "local-mac-address",
422 s->soc.gem.conf.macaddr.a, ETH_ALEN);
423 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1);
424 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0);
425
426 qemu_fdt_add_subnode(fdt, "/aliases");
427 qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename);
428
429 g_free(nodename);
430
431 nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0",
432 (long)memmap[SIFIVE_U_DEV_GEM].base);
433 qemu_fdt_add_subnode(fdt, nodename);
434 qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle);
435 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0);
436 g_free(nodename);
437
438 nodename = g_strdup_printf("/soc/pwm@%lx",
439 (long)memmap[SIFIVE_U_DEV_PWM0].base);
440 qemu_fdt_add_subnode(fdt, nodename);
441 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
442 qemu_fdt_setprop_cells(fdt, nodename, "reg",
443 0x0, memmap[SIFIVE_U_DEV_PWM0].base,
444 0x0, memmap[SIFIVE_U_DEV_PWM0].size);
445 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
446 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
447 SIFIVE_U_PWM0_IRQ0, SIFIVE_U_PWM0_IRQ1,
448 SIFIVE_U_PWM0_IRQ2, SIFIVE_U_PWM0_IRQ3);
449 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
450 prci_phandle, PRCI_CLK_TLCLK);
451 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
452 g_free(nodename);
453
454 nodename = g_strdup_printf("/soc/pwm@%lx",
455 (long)memmap[SIFIVE_U_DEV_PWM1].base);
456 qemu_fdt_add_subnode(fdt, nodename);
457 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0");
458 qemu_fdt_setprop_cells(fdt, nodename, "reg",
459 0x0, memmap[SIFIVE_U_DEV_PWM1].base,
460 0x0, memmap[SIFIVE_U_DEV_PWM1].size);
461 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
462 qemu_fdt_setprop_cells(fdt, nodename, "interrupts",
463 SIFIVE_U_PWM1_IRQ0, SIFIVE_U_PWM1_IRQ1,
464 SIFIVE_U_PWM1_IRQ2, SIFIVE_U_PWM1_IRQ3);
465 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
466 prci_phandle, PRCI_CLK_TLCLK);
467 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0);
468 g_free(nodename);
469
470 nodename = g_strdup_printf("/soc/serial@%lx",
471 (long)memmap[SIFIVE_U_DEV_UART1].base);
472 qemu_fdt_add_subnode(fdt, nodename);
473 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
474 qemu_fdt_setprop_cells(fdt, nodename, "reg",
475 0x0, memmap[SIFIVE_U_DEV_UART1].base,
476 0x0, memmap[SIFIVE_U_DEV_UART1].size);
477 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
478 prci_phandle, PRCI_CLK_TLCLK);
479 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
480 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ);
481
482 qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename);
483 g_free(nodename);
484
485 nodename = g_strdup_printf("/soc/serial@%lx",
486 (long)memmap[SIFIVE_U_DEV_UART0].base);
487 qemu_fdt_add_subnode(fdt, nodename);
488 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0");
489 qemu_fdt_setprop_cells(fdt, nodename, "reg",
490 0x0, memmap[SIFIVE_U_DEV_UART0].base,
491 0x0, memmap[SIFIVE_U_DEV_UART0].size);
492 qemu_fdt_setprop_cells(fdt, nodename, "clocks",
493 prci_phandle, PRCI_CLK_TLCLK);
494 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle);
495 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ);
496
497 qemu_fdt_add_subnode(fdt, "/chosen");
498 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename);
499 qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename);
500
501 g_free(nodename);
502 }
503
sifive_u_machine_reset(void * opaque,int n,int level)504 static void sifive_u_machine_reset(void *opaque, int n, int level)
505 {
506 /* gpio pin active low triggers reset */
507 if (!level) {
508 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET);
509 }
510 }
511
sifive_u_machine_init(MachineState * machine)512 static void sifive_u_machine_init(MachineState *machine)
513 {
514 const MemMapEntry *memmap = sifive_u_memmap;
515 SiFiveUState *s = RISCV_U_MACHINE(machine);
516 MemoryRegion *system_memory = get_system_memory();
517 MemoryRegion *flash0 = g_new(MemoryRegion, 1);
518 target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
519 target_ulong firmware_end_addr, kernel_start_addr;
520 const char *firmware_name;
521 uint32_t start_addr_hi32 = 0x00000000;
522 int i;
523 uint32_t fdt_load_addr;
524 uint64_t kernel_entry;
525 DriveInfo *dinfo;
526 BlockBackend *blk;
527 DeviceState *flash_dev, *sd_dev, *card_dev;
528 qemu_irq flash_cs, sd_cs;
529
530 /* Initialize SoC */
531 object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC);
532 object_property_set_uint(OBJECT(&s->soc), "serial", s->serial,
533 &error_abort);
534 object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type,
535 &error_abort);
536 qdev_realize(DEVICE(&s->soc), NULL, &error_fatal);
537
538 /* register RAM */
539 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base,
540 machine->ram);
541
542 /* register QSPI0 Flash */
543 memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0",
544 memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal);
545 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base,
546 flash0);
547
548 /* register gpio-restart */
549 qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10,
550 qemu_allocate_irq(sifive_u_machine_reset, NULL, 0));
551
552 /* load/create device tree */
553 if (machine->dtb) {
554 machine->fdt = load_device_tree(machine->dtb, &s->fdt_size);
555 if (!machine->fdt) {
556 error_report("load_device_tree() failed");
557 exit(1);
558 }
559 } else {
560 create_fdt(s, memmap, riscv_is_32bit(&s->soc.u_cpus));
561 }
562
563 if (s->start_in_flash) {
564 /*
565 * If start_in_flash property is given, assign s->msel to a value
566 * that representing booting from QSPI0 memory-mapped flash.
567 *
568 * This also means that when both start_in_flash and msel properties
569 * are given, start_in_flash takes the precedence over msel.
570 *
571 * Note this is to keep backward compatibility not to break existing
572 * users that use start_in_flash property.
573 */
574 s->msel = MSEL_MEMMAP_QSPI0_FLASH;
575 }
576
577 switch (s->msel) {
578 case MSEL_MEMMAP_QSPI0_FLASH:
579 start_addr = memmap[SIFIVE_U_DEV_FLASH0].base;
580 break;
581 case MSEL_L2LIM_QSPI0_FLASH:
582 case MSEL_L2LIM_QSPI2_SD:
583 start_addr = memmap[SIFIVE_U_DEV_L2LIM].base;
584 break;
585 default:
586 start_addr = memmap[SIFIVE_U_DEV_DRAM].base;
587 break;
588 }
589
590 firmware_name = riscv_default_firmware_name(&s->soc.u_cpus);
591 firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name,
592 start_addr, NULL);
593
594 if (machine->kernel_filename) {
595 kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus,
596 firmware_end_addr);
597
598 kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus,
599 kernel_start_addr, true, NULL);
600 } else {
601 /*
602 * If dynamic firmware is used, it doesn't know where is the next mode
603 * if kernel argument is not set.
604 */
605 kernel_entry = 0;
606 }
607
608 fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base,
609 memmap[SIFIVE_U_DEV_DRAM].size,
610 machine);
611 riscv_load_fdt(fdt_load_addr, machine->fdt);
612
613 if (!riscv_is_32bit(&s->soc.u_cpus)) {
614 start_addr_hi32 = (uint64_t)start_addr >> 32;
615 }
616
617 /* reset vector */
618 uint32_t reset_vec[12] = {
619 s->msel, /* MSEL pin state */
620 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */
621 0x02c28613, /* addi a2, t0, %pcrel_lo(1b) */
622 0xf1402573, /* csrr a0, mhartid */
623 0,
624 0,
625 0x00028067, /* jr t0 */
626 start_addr, /* start: .dword */
627 start_addr_hi32,
628 fdt_load_addr, /* fdt_laddr: .dword */
629 0x00000000,
630 0x00000000,
631 /* fw_dyn: */
632 };
633 if (riscv_is_32bit(&s->soc.u_cpus)) {
634 reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */
635 reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */
636 } else {
637 reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */
638 reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */
639 }
640
641
642 /* copy in the reset vector in little_endian byte order */
643 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) {
644 reset_vec[i] = cpu_to_le32(reset_vec[i]);
645 }
646 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec),
647 memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory);
648
649 riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base,
650 memmap[SIFIVE_U_DEV_MROM].size,
651 sizeof(reset_vec), kernel_entry);
652
653 /* Connect an SPI flash to SPI0 */
654 flash_dev = qdev_new("is25wp256");
655 dinfo = drive_get(IF_MTD, 0, 0);
656 if (dinfo) {
657 qdev_prop_set_drive_err(flash_dev, "drive",
658 blk_by_legacy_dinfo(dinfo),
659 &error_fatal);
660 }
661 qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal);
662
663 flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0);
664 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs);
665
666 /* Connect an SD card to SPI2 */
667 sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd");
668
669 sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0);
670 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs);
671
672 dinfo = drive_get(IF_SD, 0, 0);
673 blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL;
674 card_dev = qdev_new(TYPE_SD_CARD_SPI);
675 qdev_prop_set_drive_err(card_dev, "drive", blk, &error_fatal);
676 qdev_realize_and_unref(card_dev,
677 qdev_get_child_bus(sd_dev, "sd-bus"),
678 &error_fatal);
679 }
680
sifive_u_machine_get_start_in_flash(Object * obj,Error ** errp)681 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp)
682 {
683 SiFiveUState *s = RISCV_U_MACHINE(obj);
684
685 return s->start_in_flash;
686 }
687
sifive_u_machine_set_start_in_flash(Object * obj,bool value,Error ** errp)688 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp)
689 {
690 SiFiveUState *s = RISCV_U_MACHINE(obj);
691
692 s->start_in_flash = value;
693 }
694
sifive_u_machine_instance_init(Object * obj)695 static void sifive_u_machine_instance_init(Object *obj)
696 {
697 SiFiveUState *s = RISCV_U_MACHINE(obj);
698
699 s->start_in_flash = false;
700 s->msel = 0;
701 object_property_add_uint32_ptr(obj, "msel", &s->msel,
702 OBJ_PROP_FLAG_READWRITE);
703 object_property_set_description(obj, "msel",
704 "Mode Select (MSEL[3:0]) pin state");
705
706 s->serial = OTP_SERIAL;
707 object_property_add_uint32_ptr(obj, "serial", &s->serial,
708 OBJ_PROP_FLAG_READWRITE);
709 object_property_set_description(obj, "serial", "Board serial number");
710 }
711
sifive_u_machine_class_init(ObjectClass * oc,void * data)712 static void sifive_u_machine_class_init(ObjectClass *oc, void *data)
713 {
714 MachineClass *mc = MACHINE_CLASS(oc);
715
716 mc->desc = "RISC-V Board compatible with SiFive U SDK";
717 mc->init = sifive_u_machine_init;
718 mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT;
719 mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1;
720 mc->default_cpu_type = SIFIVE_U_CPU;
721 mc->default_cpus = mc->min_cpus;
722 mc->default_ram_id = "riscv.sifive.u.ram";
723
724 object_class_property_add_bool(oc, "start-in-flash",
725 sifive_u_machine_get_start_in_flash,
726 sifive_u_machine_set_start_in_flash);
727 object_class_property_set_description(oc, "start-in-flash",
728 "Set on to tell QEMU's ROM to jump to "
729 "flash. Otherwise QEMU will jump to DRAM "
730 "or L2LIM depending on the msel value");
731 }
732
733 static const TypeInfo sifive_u_machine_typeinfo = {
734 .name = MACHINE_TYPE_NAME("sifive_u"),
735 .parent = TYPE_MACHINE,
736 .class_init = sifive_u_machine_class_init,
737 .instance_init = sifive_u_machine_instance_init,
738 .instance_size = sizeof(SiFiveUState),
739 };
740
sifive_u_machine_init_register_types(void)741 static void sifive_u_machine_init_register_types(void)
742 {
743 type_register_static(&sifive_u_machine_typeinfo);
744 }
745
type_init(sifive_u_machine_init_register_types)746 type_init(sifive_u_machine_init_register_types)
747
748 static void sifive_u_soc_instance_init(Object *obj)
749 {
750 SiFiveUSoCState *s = RISCV_U_SOC(obj);
751
752 object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER);
753 qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0);
754
755 object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus,
756 TYPE_RISCV_HART_ARRAY);
757 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1);
758 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0);
759 qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU);
760 qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004);
761
762 object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER);
763 qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1);
764
765 object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus,
766 TYPE_RISCV_HART_ARRAY);
767
768 object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI);
769 object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP);
770 object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM);
771 object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO);
772 object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA);
773 object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI);
774 object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI);
775 object_initialize_child(obj, "pwm0", &s->pwm[0], TYPE_SIFIVE_PWM);
776 object_initialize_child(obj, "pwm1", &s->pwm[1], TYPE_SIFIVE_PWM);
777 }
778
sifive_u_soc_realize(DeviceState * dev,Error ** errp)779 static void sifive_u_soc_realize(DeviceState *dev, Error **errp)
780 {
781 MachineState *ms = MACHINE(qdev_get_machine());
782 SiFiveUSoCState *s = RISCV_U_SOC(dev);
783 const MemMapEntry *memmap = sifive_u_memmap;
784 MemoryRegion *system_memory = get_system_memory();
785 MemoryRegion *mask_rom = g_new(MemoryRegion, 1);
786 MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1);
787 char *plic_hart_config;
788 int i, j;
789
790 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1);
791 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1);
792 qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type);
793 qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004);
794
795 sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_fatal);
796 sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_fatal);
797 /*
798 * The cluster must be realized after the RISC-V hart array container,
799 * as the container's CPU object is only created on realize, and the
800 * CPU must exist and have been parented into the cluster before the
801 * cluster is realized.
802 */
803 qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort);
804 qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort);
805
806 /* boot rom */
807 memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom",
808 memmap[SIFIVE_U_DEV_MROM].size, &error_fatal);
809 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base,
810 mask_rom);
811
812 /*
813 * Add L2-LIM at reset size.
814 * This should be reduced in size as the L2 Cache Controller WayEnable
815 * register is incremented. Unfortunately I don't see a nice (or any) way
816 * to handle reducing or blocking out the L2 LIM while still allowing it
817 * be re returned to all enabled after a reset. For the time being, just
818 * leave it enabled all the time. This won't break anything, but will be
819 * too generous to misbehaving guests.
820 */
821 memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim",
822 memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal);
823 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base,
824 l2lim_mem);
825
826 /* create PLIC hart topology configuration string */
827 plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus);
828
829 /* MMIO */
830 s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base,
831 plic_hart_config, ms->smp.cpus, 0,
832 SIFIVE_U_PLIC_NUM_SOURCES,
833 SIFIVE_U_PLIC_NUM_PRIORITIES,
834 SIFIVE_U_PLIC_PRIORITY_BASE,
835 SIFIVE_U_PLIC_PENDING_BASE,
836 SIFIVE_U_PLIC_ENABLE_BASE,
837 SIFIVE_U_PLIC_ENABLE_STRIDE,
838 SIFIVE_U_PLIC_CONTEXT_BASE,
839 SIFIVE_U_PLIC_CONTEXT_STRIDE,
840 memmap[SIFIVE_U_DEV_PLIC].size);
841 g_free(plic_hart_config);
842 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base,
843 serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ));
844 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base,
845 serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ));
846 riscv_aclint_swi_create(memmap[SIFIVE_U_DEV_CLINT].base, 0,
847 ms->smp.cpus, false);
848 riscv_aclint_mtimer_create(memmap[SIFIVE_U_DEV_CLINT].base +
849 RISCV_ACLINT_SWI_SIZE,
850 RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus,
851 RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME,
852 CLINT_TIMEBASE_FREQ, false);
853
854 if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) {
855 return;
856 }
857 sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base);
858
859 qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16);
860 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) {
861 return;
862 }
863 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base);
864
865 /* Pass all GPIOs to the SOC layer so they are available to the board */
866 qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL);
867
868 /* Connect GPIO interrupts to the PLIC */
869 for (i = 0; i < 16; i++) {
870 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i,
871 qdev_get_gpio_in(DEVICE(s->plic),
872 SIFIVE_U_GPIO_IRQ0 + i));
873 }
874
875 /* PDMA */
876 sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp);
877 sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base);
878
879 /* Connect PDMA interrupts to the PLIC */
880 for (i = 0; i < SIFIVE_PDMA_IRQS; i++) {
881 sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i,
882 qdev_get_gpio_in(DEVICE(s->plic),
883 SIFIVE_U_PDMA_IRQ0 + i));
884 }
885
886 qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial);
887 if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) {
888 return;
889 }
890 sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base);
891
892 qemu_configure_nic_device(DEVICE(&s->gem), true, NULL);
893 object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION,
894 &error_abort);
895 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) {
896 return;
897 }
898 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base);
899 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0,
900 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ));
901
902 /* PWM */
903 for (i = 0; i < 2; i++) {
904 if (!sysbus_realize(SYS_BUS_DEVICE(&s->pwm[i]), errp)) {
905 return;
906 }
907 sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwm[i]), 0,
908 memmap[SIFIVE_U_DEV_PWM0].base + (0x1000 * i));
909
910 /* Connect PWM interrupts to the PLIC */
911 for (j = 0; j < SIFIVE_PWM_IRQS; j++) {
912 sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwm[i]), j,
913 qdev_get_gpio_in(DEVICE(s->plic),
914 SIFIVE_U_PWM0_IRQ0 + (i * 4) + j));
915 }
916 }
917
918 create_unimplemented_device("riscv.sifive.u.gem-mgmt",
919 memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size);
920
921 create_unimplemented_device("riscv.sifive.u.dmc",
922 memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size);
923
924 create_unimplemented_device("riscv.sifive.u.l2cc",
925 memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size);
926
927 sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp);
928 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0,
929 memmap[SIFIVE_U_DEV_QSPI0].base);
930 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0,
931 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ));
932 sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp);
933 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0,
934 memmap[SIFIVE_U_DEV_QSPI2].base);
935 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0,
936 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ));
937 }
938
939 static Property sifive_u_soc_props[] = {
940 DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL),
941 DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type),
942 DEFINE_PROP_END_OF_LIST()
943 };
944
sifive_u_soc_class_init(ObjectClass * oc,void * data)945 static void sifive_u_soc_class_init(ObjectClass *oc, void *data)
946 {
947 DeviceClass *dc = DEVICE_CLASS(oc);
948
949 device_class_set_props(dc, sifive_u_soc_props);
950 dc->realize = sifive_u_soc_realize;
951 /* Reason: Uses serial_hds in realize function, thus can't be used twice */
952 dc->user_creatable = false;
953 }
954
955 static const TypeInfo sifive_u_soc_type_info = {
956 .name = TYPE_RISCV_U_SOC,
957 .parent = TYPE_DEVICE,
958 .instance_size = sizeof(SiFiveUSoCState),
959 .instance_init = sifive_u_soc_instance_init,
960 .class_init = sifive_u_soc_class_init,
961 };
962
sifive_u_soc_register_types(void)963 static void sifive_u_soc_register_types(void)
964 {
965 type_register_static(&sifive_u_soc_type_info);
966 }
967
968 type_init(sifive_u_soc_register_types)
969