1 /* 2 * QEMU RISC-V Board Compatible with SiFive Freedom U SDK 3 * 4 * Copyright (c) 2016-2017 Sagar Karandikar, sagark@eecs.berkeley.edu 5 * Copyright (c) 2017 SiFive, Inc. 6 * Copyright (c) 2019 Bin Meng <bmeng.cn@gmail.com> 7 * 8 * Provides a board compatible with the SiFive Freedom U SDK: 9 * 10 * 0) UART 11 * 1) CLINT (Core Level Interruptor) 12 * 2) PLIC (Platform Level Interrupt Controller) 13 * 3) PRCI (Power, Reset, Clock, Interrupt) 14 * 4) GPIO (General Purpose Input/Output Controller) 15 * 5) OTP (One-Time Programmable) memory with stored serial number 16 * 6) GEM (Gigabit Ethernet Controller) and management block 17 * 7) DMA (Direct Memory Access Controller) 18 * 8) SPI0 connected to an SPI flash 19 * 9) SPI2 connected to an SD card 20 * 10) PWM0 and PWM1 21 * 22 * This board currently generates devicetree dynamically that indicates at least 23 * two harts and up to five harts. 24 * 25 * This program is free software; you can redistribute it and/or modify it 26 * under the terms and conditions of the GNU General Public License, 27 * version 2 or later, as published by the Free Software Foundation. 28 * 29 * This program is distributed in the hope it will be useful, but WITHOUT 30 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 31 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 32 * more details. 33 * 34 * You should have received a copy of the GNU General Public License along with 35 * this program. If not, see <http://www.gnu.org/licenses/>. 36 */ 37 38 #include "qemu/osdep.h" 39 #include "qemu/error-report.h" 40 #include "qapi/error.h" 41 #include "qapi/visitor.h" 42 #include "hw/boards.h" 43 #include "hw/irq.h" 44 #include "hw/loader.h" 45 #include "hw/sysbus.h" 46 #include "hw/char/serial.h" 47 #include "hw/cpu/cluster.h" 48 #include "hw/misc/unimp.h" 49 #include "hw/sd/sd.h" 50 #include "hw/ssi/ssi.h" 51 #include "target/riscv/cpu.h" 52 #include "hw/riscv/riscv_hart.h" 53 #include "hw/riscv/sifive_u.h" 54 #include "hw/riscv/boot.h" 55 #include "hw/char/sifive_uart.h" 56 #include "hw/intc/riscv_aclint.h" 57 #include "hw/intc/sifive_plic.h" 58 #include "chardev/char.h" 59 #include "net/eth.h" 60 #include "sysemu/device_tree.h" 61 #include "sysemu/runstate.h" 62 #include "sysemu/sysemu.h" 63 64 #include <libfdt.h> 65 66 /* CLINT timebase frequency */ 67 #define CLINT_TIMEBASE_FREQ 1000000 68 69 static const MemMapEntry sifive_u_memmap[] = { 70 [SIFIVE_U_DEV_DEBUG] = { 0x0, 0x100 }, 71 [SIFIVE_U_DEV_MROM] = { 0x1000, 0xf000 }, 72 [SIFIVE_U_DEV_CLINT] = { 0x2000000, 0x10000 }, 73 [SIFIVE_U_DEV_L2CC] = { 0x2010000, 0x1000 }, 74 [SIFIVE_U_DEV_PDMA] = { 0x3000000, 0x100000 }, 75 [SIFIVE_U_DEV_L2LIM] = { 0x8000000, 0x2000000 }, 76 [SIFIVE_U_DEV_PLIC] = { 0xc000000, 0x4000000 }, 77 [SIFIVE_U_DEV_PRCI] = { 0x10000000, 0x1000 }, 78 [SIFIVE_U_DEV_UART0] = { 0x10010000, 0x1000 }, 79 [SIFIVE_U_DEV_UART1] = { 0x10011000, 0x1000 }, 80 [SIFIVE_U_DEV_PWM0] = { 0x10020000, 0x1000 }, 81 [SIFIVE_U_DEV_PWM1] = { 0x10021000, 0x1000 }, 82 [SIFIVE_U_DEV_QSPI0] = { 0x10040000, 0x1000 }, 83 [SIFIVE_U_DEV_QSPI2] = { 0x10050000, 0x1000 }, 84 [SIFIVE_U_DEV_GPIO] = { 0x10060000, 0x1000 }, 85 [SIFIVE_U_DEV_OTP] = { 0x10070000, 0x1000 }, 86 [SIFIVE_U_DEV_GEM] = { 0x10090000, 0x2000 }, 87 [SIFIVE_U_DEV_GEM_MGMT] = { 0x100a0000, 0x1000 }, 88 [SIFIVE_U_DEV_DMC] = { 0x100b0000, 0x10000 }, 89 [SIFIVE_U_DEV_FLASH0] = { 0x20000000, 0x10000000 }, 90 [SIFIVE_U_DEV_DRAM] = { 0x80000000, 0x0 }, 91 }; 92 93 #define OTP_SERIAL 1 94 #define GEM_REVISION 0x10070109 95 96 static void create_fdt(SiFiveUState *s, const MemMapEntry *memmap, 97 bool is_32_bit) 98 { 99 MachineState *ms = MACHINE(s); 100 uint64_t mem_size = ms->ram_size; 101 void *fdt; 102 int cpu; 103 uint32_t *cells; 104 char *nodename; 105 uint32_t plic_phandle, prci_phandle, gpio_phandle, phandle = 1; 106 uint32_t hfclk_phandle, rtcclk_phandle, phy_phandle; 107 static const char * const ethclk_names[2] = { "pclk", "hclk" }; 108 static const char * const clint_compat[2] = { 109 "sifive,clint0", "riscv,clint0" 110 }; 111 static const char * const plic_compat[2] = { 112 "sifive,plic-1.0.0", "riscv,plic0" 113 }; 114 115 fdt = ms->fdt = create_device_tree(&s->fdt_size); 116 if (!fdt) { 117 error_report("create_device_tree() failed"); 118 exit(1); 119 } 120 121 qemu_fdt_setprop_string(fdt, "/", "model", "SiFive HiFive Unleashed A00"); 122 qemu_fdt_setprop_string(fdt, "/", "compatible", 123 "sifive,hifive-unleashed-a00"); 124 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 0x2); 125 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 0x2); 126 127 qemu_fdt_add_subnode(fdt, "/soc"); 128 qemu_fdt_setprop(fdt, "/soc", "ranges", NULL, 0); 129 qemu_fdt_setprop_string(fdt, "/soc", "compatible", "simple-bus"); 130 qemu_fdt_setprop_cell(fdt, "/soc", "#size-cells", 0x2); 131 qemu_fdt_setprop_cell(fdt, "/soc", "#address-cells", 0x2); 132 133 hfclk_phandle = phandle++; 134 nodename = g_strdup_printf("/hfclk"); 135 qemu_fdt_add_subnode(fdt, nodename); 136 qemu_fdt_setprop_cell(fdt, nodename, "phandle", hfclk_phandle); 137 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "hfclk"); 138 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 139 SIFIVE_U_HFCLK_FREQ); 140 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 141 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 142 g_free(nodename); 143 144 rtcclk_phandle = phandle++; 145 nodename = g_strdup_printf("/rtcclk"); 146 qemu_fdt_add_subnode(fdt, nodename); 147 qemu_fdt_setprop_cell(fdt, nodename, "phandle", rtcclk_phandle); 148 qemu_fdt_setprop_string(fdt, nodename, "clock-output-names", "rtcclk"); 149 qemu_fdt_setprop_cell(fdt, nodename, "clock-frequency", 150 SIFIVE_U_RTCCLK_FREQ); 151 qemu_fdt_setprop_string(fdt, nodename, "compatible", "fixed-clock"); 152 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x0); 153 g_free(nodename); 154 155 nodename = g_strdup_printf("/memory@%lx", 156 (long)memmap[SIFIVE_U_DEV_DRAM].base); 157 qemu_fdt_add_subnode(fdt, nodename); 158 qemu_fdt_setprop_cells(fdt, nodename, "reg", 159 memmap[SIFIVE_U_DEV_DRAM].base >> 32, memmap[SIFIVE_U_DEV_DRAM].base, 160 mem_size >> 32, mem_size); 161 qemu_fdt_setprop_string(fdt, nodename, "device_type", "memory"); 162 g_free(nodename); 163 164 qemu_fdt_add_subnode(fdt, "/cpus"); 165 qemu_fdt_setprop_cell(fdt, "/cpus", "timebase-frequency", 166 CLINT_TIMEBASE_FREQ); 167 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0x0); 168 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 0x1); 169 170 for (cpu = ms->smp.cpus - 1; cpu >= 0; cpu--) { 171 int cpu_phandle = phandle++; 172 nodename = g_strdup_printf("/cpus/cpu@%d", cpu); 173 char *intc = g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 174 qemu_fdt_add_subnode(fdt, nodename); 175 /* cpu 0 is the management hart that does not have mmu */ 176 if (cpu != 0) { 177 if (is_32_bit) { 178 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv32"); 179 } else { 180 qemu_fdt_setprop_string(fdt, nodename, "mmu-type", "riscv,sv48"); 181 } 182 riscv_isa_write_fdt(&s->soc.u_cpus.harts[cpu - 1], fdt, nodename); 183 } else { 184 riscv_isa_write_fdt(&s->soc.e_cpus.harts[0], fdt, nodename); 185 } 186 qemu_fdt_setprop_string(fdt, nodename, "compatible", "riscv"); 187 qemu_fdt_setprop_string(fdt, nodename, "status", "okay"); 188 qemu_fdt_setprop_cell(fdt, nodename, "reg", cpu); 189 qemu_fdt_setprop_string(fdt, nodename, "device_type", "cpu"); 190 qemu_fdt_add_subnode(fdt, intc); 191 qemu_fdt_setprop_cell(fdt, intc, "phandle", cpu_phandle); 192 qemu_fdt_setprop_string(fdt, intc, "compatible", "riscv,cpu-intc"); 193 qemu_fdt_setprop(fdt, intc, "interrupt-controller", NULL, 0); 194 qemu_fdt_setprop_cell(fdt, intc, "#interrupt-cells", 1); 195 g_free(intc); 196 g_free(nodename); 197 } 198 199 cells = g_new0(uint32_t, ms->smp.cpus * 4); 200 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 201 nodename = 202 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 203 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 204 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 205 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_M_SOFT); 206 cells[cpu * 4 + 2] = cpu_to_be32(intc_phandle); 207 cells[cpu * 4 + 3] = cpu_to_be32(IRQ_M_TIMER); 208 g_free(nodename); 209 } 210 nodename = g_strdup_printf("/soc/clint@%lx", 211 (long)memmap[SIFIVE_U_DEV_CLINT].base); 212 qemu_fdt_add_subnode(fdt, nodename); 213 qemu_fdt_setprop_string_array(fdt, nodename, "compatible", 214 (char **)&clint_compat, ARRAY_SIZE(clint_compat)); 215 qemu_fdt_setprop_cells(fdt, nodename, "reg", 216 0x0, memmap[SIFIVE_U_DEV_CLINT].base, 217 0x0, memmap[SIFIVE_U_DEV_CLINT].size); 218 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 219 cells, ms->smp.cpus * sizeof(uint32_t) * 4); 220 g_free(cells); 221 g_free(nodename); 222 223 nodename = g_strdup_printf("/soc/otp@%lx", 224 (long)memmap[SIFIVE_U_DEV_OTP].base); 225 qemu_fdt_add_subnode(fdt, nodename); 226 qemu_fdt_setprop_cell(fdt, nodename, "fuse-count", SIFIVE_U_OTP_REG_SIZE); 227 qemu_fdt_setprop_cells(fdt, nodename, "reg", 228 0x0, memmap[SIFIVE_U_DEV_OTP].base, 229 0x0, memmap[SIFIVE_U_DEV_OTP].size); 230 qemu_fdt_setprop_string(fdt, nodename, "compatible", 231 "sifive,fu540-c000-otp"); 232 g_free(nodename); 233 234 prci_phandle = phandle++; 235 nodename = g_strdup_printf("/soc/clock-controller@%lx", 236 (long)memmap[SIFIVE_U_DEV_PRCI].base); 237 qemu_fdt_add_subnode(fdt, nodename); 238 qemu_fdt_setprop_cell(fdt, nodename, "phandle", prci_phandle); 239 qemu_fdt_setprop_cell(fdt, nodename, "#clock-cells", 0x1); 240 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 241 hfclk_phandle, rtcclk_phandle); 242 qemu_fdt_setprop_cells(fdt, nodename, "reg", 243 0x0, memmap[SIFIVE_U_DEV_PRCI].base, 244 0x0, memmap[SIFIVE_U_DEV_PRCI].size); 245 qemu_fdt_setprop_string(fdt, nodename, "compatible", 246 "sifive,fu540-c000-prci"); 247 g_free(nodename); 248 249 plic_phandle = phandle++; 250 cells = g_new0(uint32_t, ms->smp.cpus * 4 - 2); 251 for (cpu = 0; cpu < ms->smp.cpus; cpu++) { 252 nodename = 253 g_strdup_printf("/cpus/cpu@%d/interrupt-controller", cpu); 254 uint32_t intc_phandle = qemu_fdt_get_phandle(fdt, nodename); 255 /* cpu 0 is the management hart that does not have S-mode */ 256 if (cpu == 0) { 257 cells[0] = cpu_to_be32(intc_phandle); 258 cells[1] = cpu_to_be32(IRQ_M_EXT); 259 } else { 260 cells[cpu * 4 - 2] = cpu_to_be32(intc_phandle); 261 cells[cpu * 4 - 1] = cpu_to_be32(IRQ_M_EXT); 262 cells[cpu * 4 + 0] = cpu_to_be32(intc_phandle); 263 cells[cpu * 4 + 1] = cpu_to_be32(IRQ_S_EXT); 264 } 265 g_free(nodename); 266 } 267 nodename = g_strdup_printf("/soc/interrupt-controller@%lx", 268 (long)memmap[SIFIVE_U_DEV_PLIC].base); 269 qemu_fdt_add_subnode(fdt, nodename); 270 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 1); 271 qemu_fdt_setprop_string_array(fdt, nodename, "compatible", 272 (char **)&plic_compat, ARRAY_SIZE(plic_compat)); 273 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 274 qemu_fdt_setprop(fdt, nodename, "interrupts-extended", 275 cells, (ms->smp.cpus * 4 - 2) * sizeof(uint32_t)); 276 qemu_fdt_setprop_cells(fdt, nodename, "reg", 277 0x0, memmap[SIFIVE_U_DEV_PLIC].base, 278 0x0, memmap[SIFIVE_U_DEV_PLIC].size); 279 qemu_fdt_setprop_cell(fdt, nodename, "riscv,ndev", 280 SIFIVE_U_PLIC_NUM_SOURCES - 1); 281 qemu_fdt_setprop_cell(fdt, nodename, "phandle", plic_phandle); 282 plic_phandle = qemu_fdt_get_phandle(fdt, nodename); 283 g_free(cells); 284 g_free(nodename); 285 286 gpio_phandle = phandle++; 287 nodename = g_strdup_printf("/soc/gpio@%lx", 288 (long)memmap[SIFIVE_U_DEV_GPIO].base); 289 qemu_fdt_add_subnode(fdt, nodename); 290 qemu_fdt_setprop_cell(fdt, nodename, "phandle", gpio_phandle); 291 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 292 prci_phandle, PRCI_CLK_TLCLK); 293 qemu_fdt_setprop_cell(fdt, nodename, "#interrupt-cells", 2); 294 qemu_fdt_setprop(fdt, nodename, "interrupt-controller", NULL, 0); 295 qemu_fdt_setprop_cell(fdt, nodename, "#gpio-cells", 2); 296 qemu_fdt_setprop(fdt, nodename, "gpio-controller", NULL, 0); 297 qemu_fdt_setprop_cells(fdt, nodename, "reg", 298 0x0, memmap[SIFIVE_U_DEV_GPIO].base, 299 0x0, memmap[SIFIVE_U_DEV_GPIO].size); 300 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", SIFIVE_U_GPIO_IRQ0, 301 SIFIVE_U_GPIO_IRQ1, SIFIVE_U_GPIO_IRQ2, SIFIVE_U_GPIO_IRQ3, 302 SIFIVE_U_GPIO_IRQ4, SIFIVE_U_GPIO_IRQ5, SIFIVE_U_GPIO_IRQ6, 303 SIFIVE_U_GPIO_IRQ7, SIFIVE_U_GPIO_IRQ8, SIFIVE_U_GPIO_IRQ9, 304 SIFIVE_U_GPIO_IRQ10, SIFIVE_U_GPIO_IRQ11, SIFIVE_U_GPIO_IRQ12, 305 SIFIVE_U_GPIO_IRQ13, SIFIVE_U_GPIO_IRQ14, SIFIVE_U_GPIO_IRQ15); 306 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 307 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,gpio0"); 308 g_free(nodename); 309 310 nodename = g_strdup_printf("/gpio-restart"); 311 qemu_fdt_add_subnode(fdt, nodename); 312 qemu_fdt_setprop_cells(fdt, nodename, "gpios", gpio_phandle, 10, 1); 313 qemu_fdt_setprop_string(fdt, nodename, "compatible", "gpio-restart"); 314 g_free(nodename); 315 316 nodename = g_strdup_printf("/soc/dma@%lx", 317 (long)memmap[SIFIVE_U_DEV_PDMA].base); 318 qemu_fdt_add_subnode(fdt, nodename); 319 qemu_fdt_setprop_cell(fdt, nodename, "#dma-cells", 1); 320 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 321 SIFIVE_U_PDMA_IRQ0, SIFIVE_U_PDMA_IRQ1, SIFIVE_U_PDMA_IRQ2, 322 SIFIVE_U_PDMA_IRQ3, SIFIVE_U_PDMA_IRQ4, SIFIVE_U_PDMA_IRQ5, 323 SIFIVE_U_PDMA_IRQ6, SIFIVE_U_PDMA_IRQ7); 324 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 325 qemu_fdt_setprop_cells(fdt, nodename, "reg", 326 0x0, memmap[SIFIVE_U_DEV_PDMA].base, 327 0x0, memmap[SIFIVE_U_DEV_PDMA].size); 328 qemu_fdt_setprop_string(fdt, nodename, "compatible", 329 "sifive,fu540-c000-pdma"); 330 g_free(nodename); 331 332 nodename = g_strdup_printf("/soc/cache-controller@%lx", 333 (long)memmap[SIFIVE_U_DEV_L2CC].base); 334 qemu_fdt_add_subnode(fdt, nodename); 335 qemu_fdt_setprop_cells(fdt, nodename, "reg", 336 0x0, memmap[SIFIVE_U_DEV_L2CC].base, 337 0x0, memmap[SIFIVE_U_DEV_L2CC].size); 338 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 339 SIFIVE_U_L2CC_IRQ0, SIFIVE_U_L2CC_IRQ1, SIFIVE_U_L2CC_IRQ2); 340 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 341 qemu_fdt_setprop(fdt, nodename, "cache-unified", NULL, 0); 342 qemu_fdt_setprop_cell(fdt, nodename, "cache-size", 2097152); 343 qemu_fdt_setprop_cell(fdt, nodename, "cache-sets", 1024); 344 qemu_fdt_setprop_cell(fdt, nodename, "cache-level", 2); 345 qemu_fdt_setprop_cell(fdt, nodename, "cache-block-size", 64); 346 qemu_fdt_setprop_string(fdt, nodename, "compatible", 347 "sifive,fu540-c000-ccache"); 348 g_free(nodename); 349 350 nodename = g_strdup_printf("/soc/spi@%lx", 351 (long)memmap[SIFIVE_U_DEV_QSPI2].base); 352 qemu_fdt_add_subnode(fdt, nodename); 353 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); 354 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); 355 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 356 prci_phandle, PRCI_CLK_TLCLK); 357 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI2_IRQ); 358 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 359 qemu_fdt_setprop_cells(fdt, nodename, "reg", 360 0x0, memmap[SIFIVE_U_DEV_QSPI2].base, 361 0x0, memmap[SIFIVE_U_DEV_QSPI2].size); 362 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0"); 363 g_free(nodename); 364 365 nodename = g_strdup_printf("/soc/spi@%lx/mmc@0", 366 (long)memmap[SIFIVE_U_DEV_QSPI2].base); 367 qemu_fdt_add_subnode(fdt, nodename); 368 qemu_fdt_setprop(fdt, nodename, "disable-wp", NULL, 0); 369 qemu_fdt_setprop_cells(fdt, nodename, "voltage-ranges", 3300, 3300); 370 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 20000000); 371 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0); 372 qemu_fdt_setprop_string(fdt, nodename, "compatible", "mmc-spi-slot"); 373 g_free(nodename); 374 375 nodename = g_strdup_printf("/soc/spi@%lx", 376 (long)memmap[SIFIVE_U_DEV_QSPI0].base); 377 qemu_fdt_add_subnode(fdt, nodename); 378 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); 379 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); 380 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 381 prci_phandle, PRCI_CLK_TLCLK); 382 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_QSPI0_IRQ); 383 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 384 qemu_fdt_setprop_cells(fdt, nodename, "reg", 385 0x0, memmap[SIFIVE_U_DEV_QSPI0].base, 386 0x0, memmap[SIFIVE_U_DEV_QSPI0].size); 387 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,spi0"); 388 g_free(nodename); 389 390 nodename = g_strdup_printf("/soc/spi@%lx/flash@0", 391 (long)memmap[SIFIVE_U_DEV_QSPI0].base); 392 qemu_fdt_add_subnode(fdt, nodename); 393 qemu_fdt_setprop_cell(fdt, nodename, "spi-rx-bus-width", 4); 394 qemu_fdt_setprop_cell(fdt, nodename, "spi-tx-bus-width", 4); 395 qemu_fdt_setprop(fdt, nodename, "m25p,fast-read", NULL, 0); 396 qemu_fdt_setprop_cell(fdt, nodename, "spi-max-frequency", 50000000); 397 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0); 398 qemu_fdt_setprop_string(fdt, nodename, "compatible", "jedec,spi-nor"); 399 g_free(nodename); 400 401 phy_phandle = phandle++; 402 nodename = g_strdup_printf("/soc/ethernet@%lx", 403 (long)memmap[SIFIVE_U_DEV_GEM].base); 404 qemu_fdt_add_subnode(fdt, nodename); 405 qemu_fdt_setprop_string(fdt, nodename, "compatible", 406 "sifive,fu540-c000-gem"); 407 qemu_fdt_setprop_cells(fdt, nodename, "reg", 408 0x0, memmap[SIFIVE_U_DEV_GEM].base, 409 0x0, memmap[SIFIVE_U_DEV_GEM].size, 410 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].base, 411 0x0, memmap[SIFIVE_U_DEV_GEM_MGMT].size); 412 qemu_fdt_setprop_string(fdt, nodename, "reg-names", "control"); 413 qemu_fdt_setprop_string(fdt, nodename, "phy-mode", "gmii"); 414 qemu_fdt_setprop_cell(fdt, nodename, "phy-handle", phy_phandle); 415 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 416 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_GEM_IRQ); 417 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 418 prci_phandle, PRCI_CLK_GEMGXLPLL, prci_phandle, PRCI_CLK_GEMGXLPLL); 419 qemu_fdt_setprop_string_array(fdt, nodename, "clock-names", 420 (char **)ðclk_names, ARRAY_SIZE(ethclk_names)); 421 qemu_fdt_setprop(fdt, nodename, "local-mac-address", 422 s->soc.gem.conf.macaddr.a, ETH_ALEN); 423 qemu_fdt_setprop_cell(fdt, nodename, "#address-cells", 1); 424 qemu_fdt_setprop_cell(fdt, nodename, "#size-cells", 0); 425 426 qemu_fdt_add_subnode(fdt, "/aliases"); 427 qemu_fdt_setprop_string(fdt, "/aliases", "ethernet0", nodename); 428 429 g_free(nodename); 430 431 nodename = g_strdup_printf("/soc/ethernet@%lx/ethernet-phy@0", 432 (long)memmap[SIFIVE_U_DEV_GEM].base); 433 qemu_fdt_add_subnode(fdt, nodename); 434 qemu_fdt_setprop_cell(fdt, nodename, "phandle", phy_phandle); 435 qemu_fdt_setprop_cell(fdt, nodename, "reg", 0x0); 436 g_free(nodename); 437 438 nodename = g_strdup_printf("/soc/pwm@%lx", 439 (long)memmap[SIFIVE_U_DEV_PWM0].base); 440 qemu_fdt_add_subnode(fdt, nodename); 441 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0"); 442 qemu_fdt_setprop_cells(fdt, nodename, "reg", 443 0x0, memmap[SIFIVE_U_DEV_PWM0].base, 444 0x0, memmap[SIFIVE_U_DEV_PWM0].size); 445 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 446 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 447 SIFIVE_U_PWM0_IRQ0, SIFIVE_U_PWM0_IRQ1, 448 SIFIVE_U_PWM0_IRQ2, SIFIVE_U_PWM0_IRQ3); 449 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 450 prci_phandle, PRCI_CLK_TLCLK); 451 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0); 452 g_free(nodename); 453 454 nodename = g_strdup_printf("/soc/pwm@%lx", 455 (long)memmap[SIFIVE_U_DEV_PWM1].base); 456 qemu_fdt_add_subnode(fdt, nodename); 457 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,pwm0"); 458 qemu_fdt_setprop_cells(fdt, nodename, "reg", 459 0x0, memmap[SIFIVE_U_DEV_PWM1].base, 460 0x0, memmap[SIFIVE_U_DEV_PWM1].size); 461 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 462 qemu_fdt_setprop_cells(fdt, nodename, "interrupts", 463 SIFIVE_U_PWM1_IRQ0, SIFIVE_U_PWM1_IRQ1, 464 SIFIVE_U_PWM1_IRQ2, SIFIVE_U_PWM1_IRQ3); 465 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 466 prci_phandle, PRCI_CLK_TLCLK); 467 qemu_fdt_setprop_cell(fdt, nodename, "#pwm-cells", 0); 468 g_free(nodename); 469 470 nodename = g_strdup_printf("/soc/serial@%lx", 471 (long)memmap[SIFIVE_U_DEV_UART1].base); 472 qemu_fdt_add_subnode(fdt, nodename); 473 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); 474 qemu_fdt_setprop_cells(fdt, nodename, "reg", 475 0x0, memmap[SIFIVE_U_DEV_UART1].base, 476 0x0, memmap[SIFIVE_U_DEV_UART1].size); 477 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 478 prci_phandle, PRCI_CLK_TLCLK); 479 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 480 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART1_IRQ); 481 482 qemu_fdt_setprop_string(fdt, "/aliases", "serial1", nodename); 483 g_free(nodename); 484 485 nodename = g_strdup_printf("/soc/serial@%lx", 486 (long)memmap[SIFIVE_U_DEV_UART0].base); 487 qemu_fdt_add_subnode(fdt, nodename); 488 qemu_fdt_setprop_string(fdt, nodename, "compatible", "sifive,uart0"); 489 qemu_fdt_setprop_cells(fdt, nodename, "reg", 490 0x0, memmap[SIFIVE_U_DEV_UART0].base, 491 0x0, memmap[SIFIVE_U_DEV_UART0].size); 492 qemu_fdt_setprop_cells(fdt, nodename, "clocks", 493 prci_phandle, PRCI_CLK_TLCLK); 494 qemu_fdt_setprop_cell(fdt, nodename, "interrupt-parent", plic_phandle); 495 qemu_fdt_setprop_cell(fdt, nodename, "interrupts", SIFIVE_U_UART0_IRQ); 496 497 qemu_fdt_add_subnode(fdt, "/chosen"); 498 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", nodename); 499 qemu_fdt_setprop_string(fdt, "/aliases", "serial0", nodename); 500 501 g_free(nodename); 502 } 503 504 static void sifive_u_machine_reset(void *opaque, int n, int level) 505 { 506 /* gpio pin active low triggers reset */ 507 if (!level) { 508 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 509 } 510 } 511 512 static void sifive_u_machine_init(MachineState *machine) 513 { 514 const MemMapEntry *memmap = sifive_u_memmap; 515 SiFiveUState *s = RISCV_U_MACHINE(machine); 516 MemoryRegion *system_memory = get_system_memory(); 517 MemoryRegion *flash0 = g_new(MemoryRegion, 1); 518 target_ulong start_addr = memmap[SIFIVE_U_DEV_DRAM].base; 519 target_ulong firmware_end_addr, kernel_start_addr; 520 const char *firmware_name; 521 uint32_t start_addr_hi32 = 0x00000000; 522 int i; 523 uint32_t fdt_load_addr; 524 uint64_t kernel_entry; 525 DriveInfo *dinfo; 526 BlockBackend *blk; 527 DeviceState *flash_dev, *sd_dev, *card_dev; 528 qemu_irq flash_cs, sd_cs; 529 530 /* Initialize SoC */ 531 object_initialize_child(OBJECT(machine), "soc", &s->soc, TYPE_RISCV_U_SOC); 532 object_property_set_uint(OBJECT(&s->soc), "serial", s->serial, 533 &error_abort); 534 object_property_set_str(OBJECT(&s->soc), "cpu-type", machine->cpu_type, 535 &error_abort); 536 qdev_realize(DEVICE(&s->soc), NULL, &error_fatal); 537 538 /* register RAM */ 539 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_DRAM].base, 540 machine->ram); 541 542 /* register QSPI0 Flash */ 543 memory_region_init_ram(flash0, NULL, "riscv.sifive.u.flash0", 544 memmap[SIFIVE_U_DEV_FLASH0].size, &error_fatal); 545 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_FLASH0].base, 546 flash0); 547 548 /* register gpio-restart */ 549 qdev_connect_gpio_out(DEVICE(&(s->soc.gpio)), 10, 550 qemu_allocate_irq(sifive_u_machine_reset, NULL, 0)); 551 552 /* load/create device tree */ 553 if (machine->dtb) { 554 machine->fdt = load_device_tree(machine->dtb, &s->fdt_size); 555 if (!machine->fdt) { 556 error_report("load_device_tree() failed"); 557 exit(1); 558 } 559 } else { 560 create_fdt(s, memmap, riscv_is_32bit(&s->soc.u_cpus)); 561 } 562 563 if (s->start_in_flash) { 564 /* 565 * If start_in_flash property is given, assign s->msel to a value 566 * that representing booting from QSPI0 memory-mapped flash. 567 * 568 * This also means that when both start_in_flash and msel properties 569 * are given, start_in_flash takes the precedence over msel. 570 * 571 * Note this is to keep backward compatibility not to break existing 572 * users that use start_in_flash property. 573 */ 574 s->msel = MSEL_MEMMAP_QSPI0_FLASH; 575 } 576 577 switch (s->msel) { 578 case MSEL_MEMMAP_QSPI0_FLASH: 579 start_addr = memmap[SIFIVE_U_DEV_FLASH0].base; 580 break; 581 case MSEL_L2LIM_QSPI0_FLASH: 582 case MSEL_L2LIM_QSPI2_SD: 583 start_addr = memmap[SIFIVE_U_DEV_L2LIM].base; 584 break; 585 default: 586 start_addr = memmap[SIFIVE_U_DEV_DRAM].base; 587 break; 588 } 589 590 firmware_name = riscv_default_firmware_name(&s->soc.u_cpus); 591 firmware_end_addr = riscv_find_and_load_firmware(machine, firmware_name, 592 start_addr, NULL); 593 594 if (machine->kernel_filename) { 595 kernel_start_addr = riscv_calc_kernel_start_addr(&s->soc.u_cpus, 596 firmware_end_addr); 597 598 kernel_entry = riscv_load_kernel(machine, &s->soc.u_cpus, 599 kernel_start_addr, true, NULL); 600 } else { 601 /* 602 * If dynamic firmware is used, it doesn't know where is the next mode 603 * if kernel argument is not set. 604 */ 605 kernel_entry = 0; 606 } 607 608 fdt_load_addr = riscv_compute_fdt_addr(memmap[SIFIVE_U_DEV_DRAM].base, 609 memmap[SIFIVE_U_DEV_DRAM].size, 610 machine); 611 riscv_load_fdt(fdt_load_addr, machine->fdt); 612 613 if (!riscv_is_32bit(&s->soc.u_cpus)) { 614 start_addr_hi32 = (uint64_t)start_addr >> 32; 615 } 616 617 /* reset vector */ 618 uint32_t reset_vec[12] = { 619 s->msel, /* MSEL pin state */ 620 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 621 0x02c28613, /* addi a2, t0, %pcrel_lo(1b) */ 622 0xf1402573, /* csrr a0, mhartid */ 623 0, 624 0, 625 0x00028067, /* jr t0 */ 626 start_addr, /* start: .dword */ 627 start_addr_hi32, 628 fdt_load_addr, /* fdt_laddr: .dword */ 629 0x00000000, 630 0x00000000, 631 /* fw_dyn: */ 632 }; 633 if (riscv_is_32bit(&s->soc.u_cpus)) { 634 reset_vec[4] = 0x0202a583; /* lw a1, 32(t0) */ 635 reset_vec[5] = 0x0182a283; /* lw t0, 24(t0) */ 636 } else { 637 reset_vec[4] = 0x0202b583; /* ld a1, 32(t0) */ 638 reset_vec[5] = 0x0182b283; /* ld t0, 24(t0) */ 639 } 640 641 642 /* copy in the reset vector in little_endian byte order */ 643 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { 644 reset_vec[i] = cpu_to_le32(reset_vec[i]); 645 } 646 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 647 memmap[SIFIVE_U_DEV_MROM].base, &address_space_memory); 648 649 riscv_rom_copy_firmware_info(machine, memmap[SIFIVE_U_DEV_MROM].base, 650 memmap[SIFIVE_U_DEV_MROM].size, 651 sizeof(reset_vec), kernel_entry); 652 653 /* Connect an SPI flash to SPI0 */ 654 flash_dev = qdev_new("is25wp256"); 655 dinfo = drive_get(IF_MTD, 0, 0); 656 if (dinfo) { 657 qdev_prop_set_drive_err(flash_dev, "drive", 658 blk_by_legacy_dinfo(dinfo), 659 &error_fatal); 660 } 661 qdev_realize_and_unref(flash_dev, BUS(s->soc.spi0.spi), &error_fatal); 662 663 flash_cs = qdev_get_gpio_in_named(flash_dev, SSI_GPIO_CS, 0); 664 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi0), 1, flash_cs); 665 666 /* Connect an SD card to SPI2 */ 667 sd_dev = ssi_create_peripheral(s->soc.spi2.spi, "ssi-sd"); 668 669 sd_cs = qdev_get_gpio_in_named(sd_dev, SSI_GPIO_CS, 0); 670 sysbus_connect_irq(SYS_BUS_DEVICE(&s->soc.spi2), 1, sd_cs); 671 672 dinfo = drive_get(IF_SD, 0, 0); 673 blk = dinfo ? blk_by_legacy_dinfo(dinfo) : NULL; 674 card_dev = qdev_new(TYPE_SD_CARD_SPI); 675 qdev_prop_set_drive_err(card_dev, "drive", blk, &error_fatal); 676 qdev_realize_and_unref(card_dev, 677 qdev_get_child_bus(sd_dev, "sd-bus"), 678 &error_fatal); 679 } 680 681 static bool sifive_u_machine_get_start_in_flash(Object *obj, Error **errp) 682 { 683 SiFiveUState *s = RISCV_U_MACHINE(obj); 684 685 return s->start_in_flash; 686 } 687 688 static void sifive_u_machine_set_start_in_flash(Object *obj, bool value, Error **errp) 689 { 690 SiFiveUState *s = RISCV_U_MACHINE(obj); 691 692 s->start_in_flash = value; 693 } 694 695 static void sifive_u_machine_instance_init(Object *obj) 696 { 697 SiFiveUState *s = RISCV_U_MACHINE(obj); 698 699 s->start_in_flash = false; 700 s->msel = 0; 701 object_property_add_uint32_ptr(obj, "msel", &s->msel, 702 OBJ_PROP_FLAG_READWRITE); 703 object_property_set_description(obj, "msel", 704 "Mode Select (MSEL[3:0]) pin state"); 705 706 s->serial = OTP_SERIAL; 707 object_property_add_uint32_ptr(obj, "serial", &s->serial, 708 OBJ_PROP_FLAG_READWRITE); 709 object_property_set_description(obj, "serial", "Board serial number"); 710 } 711 712 static void sifive_u_machine_class_init(ObjectClass *oc, void *data) 713 { 714 MachineClass *mc = MACHINE_CLASS(oc); 715 716 mc->desc = "RISC-V Board compatible with SiFive U SDK"; 717 mc->init = sifive_u_machine_init; 718 mc->max_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + SIFIVE_U_COMPUTE_CPU_COUNT; 719 mc->min_cpus = SIFIVE_U_MANAGEMENT_CPU_COUNT + 1; 720 mc->default_cpu_type = SIFIVE_U_CPU; 721 mc->default_cpus = mc->min_cpus; 722 mc->default_ram_id = "riscv.sifive.u.ram"; 723 724 object_class_property_add_bool(oc, "start-in-flash", 725 sifive_u_machine_get_start_in_flash, 726 sifive_u_machine_set_start_in_flash); 727 object_class_property_set_description(oc, "start-in-flash", 728 "Set on to tell QEMU's ROM to jump to " 729 "flash. Otherwise QEMU will jump to DRAM " 730 "or L2LIM depending on the msel value"); 731 } 732 733 static const TypeInfo sifive_u_machine_typeinfo = { 734 .name = MACHINE_TYPE_NAME("sifive_u"), 735 .parent = TYPE_MACHINE, 736 .class_init = sifive_u_machine_class_init, 737 .instance_init = sifive_u_machine_instance_init, 738 .instance_size = sizeof(SiFiveUState), 739 }; 740 741 static void sifive_u_machine_init_register_types(void) 742 { 743 type_register_static(&sifive_u_machine_typeinfo); 744 } 745 746 type_init(sifive_u_machine_init_register_types) 747 748 static void sifive_u_soc_instance_init(Object *obj) 749 { 750 SiFiveUSoCState *s = RISCV_U_SOC(obj); 751 752 object_initialize_child(obj, "e-cluster", &s->e_cluster, TYPE_CPU_CLUSTER); 753 qdev_prop_set_uint32(DEVICE(&s->e_cluster), "cluster-id", 0); 754 755 object_initialize_child(OBJECT(&s->e_cluster), "e-cpus", &s->e_cpus, 756 TYPE_RISCV_HART_ARRAY); 757 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "num-harts", 1); 758 qdev_prop_set_uint32(DEVICE(&s->e_cpus), "hartid-base", 0); 759 qdev_prop_set_string(DEVICE(&s->e_cpus), "cpu-type", SIFIVE_E_CPU); 760 qdev_prop_set_uint64(DEVICE(&s->e_cpus), "resetvec", 0x1004); 761 762 object_initialize_child(obj, "u-cluster", &s->u_cluster, TYPE_CPU_CLUSTER); 763 qdev_prop_set_uint32(DEVICE(&s->u_cluster), "cluster-id", 1); 764 765 object_initialize_child(OBJECT(&s->u_cluster), "u-cpus", &s->u_cpus, 766 TYPE_RISCV_HART_ARRAY); 767 768 object_initialize_child(obj, "prci", &s->prci, TYPE_SIFIVE_U_PRCI); 769 object_initialize_child(obj, "otp", &s->otp, TYPE_SIFIVE_U_OTP); 770 object_initialize_child(obj, "gem", &s->gem, TYPE_CADENCE_GEM); 771 object_initialize_child(obj, "gpio", &s->gpio, TYPE_SIFIVE_GPIO); 772 object_initialize_child(obj, "pdma", &s->dma, TYPE_SIFIVE_PDMA); 773 object_initialize_child(obj, "spi0", &s->spi0, TYPE_SIFIVE_SPI); 774 object_initialize_child(obj, "spi2", &s->spi2, TYPE_SIFIVE_SPI); 775 object_initialize_child(obj, "pwm0", &s->pwm[0], TYPE_SIFIVE_PWM); 776 object_initialize_child(obj, "pwm1", &s->pwm[1], TYPE_SIFIVE_PWM); 777 } 778 779 static void sifive_u_soc_realize(DeviceState *dev, Error **errp) 780 { 781 MachineState *ms = MACHINE(qdev_get_machine()); 782 SiFiveUSoCState *s = RISCV_U_SOC(dev); 783 const MemMapEntry *memmap = sifive_u_memmap; 784 MemoryRegion *system_memory = get_system_memory(); 785 MemoryRegion *mask_rom = g_new(MemoryRegion, 1); 786 MemoryRegion *l2lim_mem = g_new(MemoryRegion, 1); 787 char *plic_hart_config; 788 int i, j; 789 790 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "num-harts", ms->smp.cpus - 1); 791 qdev_prop_set_uint32(DEVICE(&s->u_cpus), "hartid-base", 1); 792 qdev_prop_set_string(DEVICE(&s->u_cpus), "cpu-type", s->cpu_type); 793 qdev_prop_set_uint64(DEVICE(&s->u_cpus), "resetvec", 0x1004); 794 795 sysbus_realize(SYS_BUS_DEVICE(&s->e_cpus), &error_fatal); 796 sysbus_realize(SYS_BUS_DEVICE(&s->u_cpus), &error_fatal); 797 /* 798 * The cluster must be realized after the RISC-V hart array container, 799 * as the container's CPU object is only created on realize, and the 800 * CPU must exist and have been parented into the cluster before the 801 * cluster is realized. 802 */ 803 qdev_realize(DEVICE(&s->e_cluster), NULL, &error_abort); 804 qdev_realize(DEVICE(&s->u_cluster), NULL, &error_abort); 805 806 /* boot rom */ 807 memory_region_init_rom(mask_rom, OBJECT(dev), "riscv.sifive.u.mrom", 808 memmap[SIFIVE_U_DEV_MROM].size, &error_fatal); 809 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_MROM].base, 810 mask_rom); 811 812 /* 813 * Add L2-LIM at reset size. 814 * This should be reduced in size as the L2 Cache Controller WayEnable 815 * register is incremented. Unfortunately I don't see a nice (or any) way 816 * to handle reducing or blocking out the L2 LIM while still allowing it 817 * be re returned to all enabled after a reset. For the time being, just 818 * leave it enabled all the time. This won't break anything, but will be 819 * too generous to misbehaving guests. 820 */ 821 memory_region_init_ram(l2lim_mem, NULL, "riscv.sifive.u.l2lim", 822 memmap[SIFIVE_U_DEV_L2LIM].size, &error_fatal); 823 memory_region_add_subregion(system_memory, memmap[SIFIVE_U_DEV_L2LIM].base, 824 l2lim_mem); 825 826 /* create PLIC hart topology configuration string */ 827 plic_hart_config = riscv_plic_hart_config_string(ms->smp.cpus); 828 829 /* MMIO */ 830 s->plic = sifive_plic_create(memmap[SIFIVE_U_DEV_PLIC].base, 831 plic_hart_config, ms->smp.cpus, 0, 832 SIFIVE_U_PLIC_NUM_SOURCES, 833 SIFIVE_U_PLIC_NUM_PRIORITIES, 834 SIFIVE_U_PLIC_PRIORITY_BASE, 835 SIFIVE_U_PLIC_PENDING_BASE, 836 SIFIVE_U_PLIC_ENABLE_BASE, 837 SIFIVE_U_PLIC_ENABLE_STRIDE, 838 SIFIVE_U_PLIC_CONTEXT_BASE, 839 SIFIVE_U_PLIC_CONTEXT_STRIDE, 840 memmap[SIFIVE_U_DEV_PLIC].size); 841 g_free(plic_hart_config); 842 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART0].base, 843 serial_hd(0), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART0_IRQ)); 844 sifive_uart_create(system_memory, memmap[SIFIVE_U_DEV_UART1].base, 845 serial_hd(1), qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_UART1_IRQ)); 846 riscv_aclint_swi_create(memmap[SIFIVE_U_DEV_CLINT].base, 0, 847 ms->smp.cpus, false); 848 riscv_aclint_mtimer_create(memmap[SIFIVE_U_DEV_CLINT].base + 849 RISCV_ACLINT_SWI_SIZE, 850 RISCV_ACLINT_DEFAULT_MTIMER_SIZE, 0, ms->smp.cpus, 851 RISCV_ACLINT_DEFAULT_MTIMECMP, RISCV_ACLINT_DEFAULT_MTIME, 852 CLINT_TIMEBASE_FREQ, false); 853 854 if (!sysbus_realize(SYS_BUS_DEVICE(&s->prci), errp)) { 855 return; 856 } 857 sysbus_mmio_map(SYS_BUS_DEVICE(&s->prci), 0, memmap[SIFIVE_U_DEV_PRCI].base); 858 859 qdev_prop_set_uint32(DEVICE(&s->gpio), "ngpio", 16); 860 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gpio), errp)) { 861 return; 862 } 863 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gpio), 0, memmap[SIFIVE_U_DEV_GPIO].base); 864 865 /* Pass all GPIOs to the SOC layer so they are available to the board */ 866 qdev_pass_gpios(DEVICE(&s->gpio), dev, NULL); 867 868 /* Connect GPIO interrupts to the PLIC */ 869 for (i = 0; i < 16; i++) { 870 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gpio), i, 871 qdev_get_gpio_in(DEVICE(s->plic), 872 SIFIVE_U_GPIO_IRQ0 + i)); 873 } 874 875 /* PDMA */ 876 sysbus_realize(SYS_BUS_DEVICE(&s->dma), errp); 877 sysbus_mmio_map(SYS_BUS_DEVICE(&s->dma), 0, memmap[SIFIVE_U_DEV_PDMA].base); 878 879 /* Connect PDMA interrupts to the PLIC */ 880 for (i = 0; i < SIFIVE_PDMA_IRQS; i++) { 881 sysbus_connect_irq(SYS_BUS_DEVICE(&s->dma), i, 882 qdev_get_gpio_in(DEVICE(s->plic), 883 SIFIVE_U_PDMA_IRQ0 + i)); 884 } 885 886 qdev_prop_set_uint32(DEVICE(&s->otp), "serial", s->serial); 887 if (!sysbus_realize(SYS_BUS_DEVICE(&s->otp), errp)) { 888 return; 889 } 890 sysbus_mmio_map(SYS_BUS_DEVICE(&s->otp), 0, memmap[SIFIVE_U_DEV_OTP].base); 891 892 qemu_configure_nic_device(DEVICE(&s->gem), true, NULL); 893 object_property_set_int(OBJECT(&s->gem), "revision", GEM_REVISION, 894 &error_abort); 895 if (!sysbus_realize(SYS_BUS_DEVICE(&s->gem), errp)) { 896 return; 897 } 898 sysbus_mmio_map(SYS_BUS_DEVICE(&s->gem), 0, memmap[SIFIVE_U_DEV_GEM].base); 899 sysbus_connect_irq(SYS_BUS_DEVICE(&s->gem), 0, 900 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_GEM_IRQ)); 901 902 /* PWM */ 903 for (i = 0; i < 2; i++) { 904 if (!sysbus_realize(SYS_BUS_DEVICE(&s->pwm[i]), errp)) { 905 return; 906 } 907 sysbus_mmio_map(SYS_BUS_DEVICE(&s->pwm[i]), 0, 908 memmap[SIFIVE_U_DEV_PWM0].base + (0x1000 * i)); 909 910 /* Connect PWM interrupts to the PLIC */ 911 for (j = 0; j < SIFIVE_PWM_IRQS; j++) { 912 sysbus_connect_irq(SYS_BUS_DEVICE(&s->pwm[i]), j, 913 qdev_get_gpio_in(DEVICE(s->plic), 914 SIFIVE_U_PWM0_IRQ0 + (i * 4) + j)); 915 } 916 } 917 918 create_unimplemented_device("riscv.sifive.u.gem-mgmt", 919 memmap[SIFIVE_U_DEV_GEM_MGMT].base, memmap[SIFIVE_U_DEV_GEM_MGMT].size); 920 921 create_unimplemented_device("riscv.sifive.u.dmc", 922 memmap[SIFIVE_U_DEV_DMC].base, memmap[SIFIVE_U_DEV_DMC].size); 923 924 create_unimplemented_device("riscv.sifive.u.l2cc", 925 memmap[SIFIVE_U_DEV_L2CC].base, memmap[SIFIVE_U_DEV_L2CC].size); 926 927 sysbus_realize(SYS_BUS_DEVICE(&s->spi0), errp); 928 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi0), 0, 929 memmap[SIFIVE_U_DEV_QSPI0].base); 930 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi0), 0, 931 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI0_IRQ)); 932 sysbus_realize(SYS_BUS_DEVICE(&s->spi2), errp); 933 sysbus_mmio_map(SYS_BUS_DEVICE(&s->spi2), 0, 934 memmap[SIFIVE_U_DEV_QSPI2].base); 935 sysbus_connect_irq(SYS_BUS_DEVICE(&s->spi2), 0, 936 qdev_get_gpio_in(DEVICE(s->plic), SIFIVE_U_QSPI2_IRQ)); 937 } 938 939 static Property sifive_u_soc_props[] = { 940 DEFINE_PROP_UINT32("serial", SiFiveUSoCState, serial, OTP_SERIAL), 941 DEFINE_PROP_STRING("cpu-type", SiFiveUSoCState, cpu_type), 942 DEFINE_PROP_END_OF_LIST() 943 }; 944 945 static void sifive_u_soc_class_init(ObjectClass *oc, void *data) 946 { 947 DeviceClass *dc = DEVICE_CLASS(oc); 948 949 device_class_set_props(dc, sifive_u_soc_props); 950 dc->realize = sifive_u_soc_realize; 951 /* Reason: Uses serial_hds in realize function, thus can't be used twice */ 952 dc->user_creatable = false; 953 } 954 955 static const TypeInfo sifive_u_soc_type_info = { 956 .name = TYPE_RISCV_U_SOC, 957 .parent = TYPE_DEVICE, 958 .instance_size = sizeof(SiFiveUSoCState), 959 .instance_init = sifive_u_soc_instance_init, 960 .class_init = sifive_u_soc_class_init, 961 }; 962 963 static void sifive_u_soc_register_types(void) 964 { 965 type_register_static(&sifive_u_soc_type_info); 966 } 967 968 type_init(sifive_u_soc_register_types) 969