1 /* 2 * QEMU RISC-V Boot Helper 3 * 4 * Copyright (c) 2017 SiFive, Inc. 5 * Copyright (c) 2019 Alistair Francis <alistair.francis@wdc.com> 6 * 7 * This program is free software; you can redistribute it and/or modify it 8 * under the terms and conditions of the GNU General Public License, 9 * version 2 or later, as published by the Free Software Foundation. 10 * 11 * This program is distributed in the hope it will be useful, but WITHOUT 12 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or 13 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for 14 * more details. 15 * 16 * You should have received a copy of the GNU General Public License along with 17 * this program. If not, see <http://www.gnu.org/licenses/>. 18 */ 19 20 #include "qemu/osdep.h" 21 #include "qemu/datadir.h" 22 #include "qemu/units.h" 23 #include "qemu/error-report.h" 24 #include "exec/cpu-defs.h" 25 #include "hw/boards.h" 26 #include "hw/loader.h" 27 #include "hw/riscv/boot.h" 28 #include "hw/riscv/boot_opensbi.h" 29 #include "elf.h" 30 #include "sysemu/device_tree.h" 31 #include "sysemu/qtest.h" 32 #include "sysemu/kvm.h" 33 #include "sysemu/reset.h" 34 35 #include <libfdt.h> 36 37 bool riscv_is_32bit(RISCVHartArrayState *harts) 38 { 39 return harts->harts[0].env.misa_mxl_max == MXL_RV32; 40 } 41 42 /* 43 * Return the per-socket PLIC hart topology configuration string 44 * (caller must free with g_free()) 45 */ 46 char *riscv_plic_hart_config_string(int hart_count) 47 { 48 g_autofree const char **vals = g_new(const char *, hart_count + 1); 49 int i; 50 51 for (i = 0; i < hart_count; i++) { 52 CPUState *cs = qemu_get_cpu(i); 53 CPURISCVState *env = &RISCV_CPU(cs)->env; 54 55 if (kvm_enabled()) { 56 vals[i] = "S"; 57 } else if (riscv_has_ext(env, RVS)) { 58 vals[i] = "MS"; 59 } else { 60 vals[i] = "M"; 61 } 62 } 63 vals[i] = NULL; 64 65 /* g_strjoinv() obliges us to cast away const here */ 66 return g_strjoinv(",", (char **)vals); 67 } 68 69 target_ulong riscv_calc_kernel_start_addr(RISCVHartArrayState *harts, 70 target_ulong firmware_end_addr) { 71 if (riscv_is_32bit(harts)) { 72 return QEMU_ALIGN_UP(firmware_end_addr, 4 * MiB); 73 } else { 74 return QEMU_ALIGN_UP(firmware_end_addr, 2 * MiB); 75 } 76 } 77 78 const char *riscv_default_firmware_name(RISCVHartArrayState *harts) 79 { 80 if (riscv_is_32bit(harts)) { 81 return RISCV32_BIOS_BIN; 82 } 83 84 return RISCV64_BIOS_BIN; 85 } 86 87 static char *riscv_find_bios(const char *bios_filename) 88 { 89 char *filename; 90 91 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_filename); 92 if (filename == NULL) { 93 if (!qtest_enabled()) { 94 /* 95 * We only ship OpenSBI binary bios images in the QEMU source. 96 * For machines that use images other than the default bios, 97 * running QEMU test will complain hence let's suppress the error 98 * report for QEMU testing. 99 */ 100 error_report("Unable to find the RISC-V BIOS \"%s\"", 101 bios_filename); 102 exit(1); 103 } 104 } 105 106 return filename; 107 } 108 109 char *riscv_find_firmware(const char *firmware_filename, 110 const char *default_machine_firmware) 111 { 112 char *filename = NULL; 113 114 if ((!firmware_filename) || (!strcmp(firmware_filename, "default"))) { 115 /* 116 * The user didn't specify -bios, or has specified "-bios default". 117 * That means we are going to load the OpenSBI binary included in 118 * the QEMU source. 119 */ 120 filename = riscv_find_bios(default_machine_firmware); 121 } else if (strcmp(firmware_filename, "none")) { 122 filename = riscv_find_bios(firmware_filename); 123 } 124 125 return filename; 126 } 127 128 target_ulong riscv_find_and_load_firmware(MachineState *machine, 129 const char *default_machine_firmware, 130 hwaddr firmware_load_addr, 131 symbol_fn_t sym_cb) 132 { 133 char *firmware_filename; 134 target_ulong firmware_end_addr = firmware_load_addr; 135 136 firmware_filename = riscv_find_firmware(machine->firmware, 137 default_machine_firmware); 138 139 if (firmware_filename) { 140 /* If not "none" load the firmware */ 141 firmware_end_addr = riscv_load_firmware(firmware_filename, 142 firmware_load_addr, sym_cb); 143 g_free(firmware_filename); 144 } 145 146 return firmware_end_addr; 147 } 148 149 target_ulong riscv_load_firmware(const char *firmware_filename, 150 hwaddr firmware_load_addr, 151 symbol_fn_t sym_cb) 152 { 153 uint64_t firmware_entry, firmware_end; 154 ssize_t firmware_size; 155 156 g_assert(firmware_filename != NULL); 157 158 if (load_elf_ram_sym(firmware_filename, NULL, NULL, NULL, 159 &firmware_entry, NULL, &firmware_end, NULL, 160 0, EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { 161 return firmware_end; 162 } 163 164 firmware_size = load_image_targphys_as(firmware_filename, 165 firmware_load_addr, 166 current_machine->ram_size, NULL); 167 168 if (firmware_size > 0) { 169 return firmware_load_addr + firmware_size; 170 } 171 172 error_report("could not load firmware '%s'", firmware_filename); 173 exit(1); 174 } 175 176 target_ulong riscv_load_kernel(MachineState *machine, 177 target_ulong kernel_start_addr, 178 symbol_fn_t sym_cb) 179 { 180 const char *kernel_filename = machine->kernel_filename; 181 uint64_t kernel_load_base, kernel_entry; 182 183 g_assert(kernel_filename != NULL); 184 185 /* 186 * NB: Use low address not ELF entry point to ensure that the fw_dynamic 187 * behaviour when loading an ELF matches the fw_payload, fw_jump and BBL 188 * behaviour, as well as fw_dynamic with a raw binary, all of which jump to 189 * the (expected) load address load address. This allows kernels to have 190 * separate SBI and ELF entry points (used by FreeBSD, for example). 191 */ 192 if (load_elf_ram_sym(kernel_filename, NULL, NULL, NULL, 193 NULL, &kernel_load_base, NULL, NULL, 0, 194 EM_RISCV, 1, 0, NULL, true, sym_cb) > 0) { 195 return kernel_load_base; 196 } 197 198 if (load_uimage_as(kernel_filename, &kernel_entry, NULL, NULL, 199 NULL, NULL, NULL) > 0) { 200 return kernel_entry; 201 } 202 203 if (load_image_targphys_as(kernel_filename, kernel_start_addr, 204 current_machine->ram_size, NULL) > 0) { 205 return kernel_start_addr; 206 } 207 208 error_report("could not load kernel '%s'", kernel_filename); 209 exit(1); 210 } 211 212 void riscv_load_initrd(MachineState *machine, uint64_t kernel_entry) 213 { 214 const char *filename = machine->initrd_filename; 215 uint64_t mem_size = machine->ram_size; 216 void *fdt = machine->fdt; 217 hwaddr start, end; 218 ssize_t size; 219 220 g_assert(filename != NULL); 221 222 /* 223 * We want to put the initrd far enough into RAM that when the 224 * kernel is uncompressed it will not clobber the initrd. However 225 * on boards without much RAM we must ensure that we still leave 226 * enough room for a decent sized initrd, and on boards with large 227 * amounts of RAM we must avoid the initrd being so far up in RAM 228 * that it is outside lowmem and inaccessible to the kernel. 229 * So for boards with less than 256MB of RAM we put the initrd 230 * halfway into RAM, and for boards with 256MB of RAM or more we put 231 * the initrd at 128MB. 232 */ 233 start = kernel_entry + MIN(mem_size / 2, 128 * MiB); 234 235 size = load_ramdisk(filename, start, mem_size - start); 236 if (size == -1) { 237 size = load_image_targphys(filename, start, mem_size - start); 238 if (size == -1) { 239 error_report("could not load ramdisk '%s'", filename); 240 exit(1); 241 } 242 } 243 244 /* Some RISC-V machines (e.g. opentitan) don't have a fdt. */ 245 if (fdt) { 246 end = start + size; 247 qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", start); 248 qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", end); 249 } 250 } 251 252 uint64_t riscv_load_fdt(hwaddr dram_base, uint64_t mem_size, void *fdt) 253 { 254 uint64_t temp, fdt_addr; 255 hwaddr dram_end = dram_base + mem_size; 256 int ret, fdtsize = fdt_totalsize(fdt); 257 258 if (fdtsize <= 0) { 259 error_report("invalid device-tree"); 260 exit(1); 261 } 262 263 /* 264 * We should put fdt as far as possible to avoid kernel/initrd overwriting 265 * its content. But it should be addressable by 32 bit system as well. 266 * Thus, put it at an 2MB aligned address that less than fdt size from the 267 * end of dram or 3GB whichever is lesser. 268 */ 269 temp = (dram_base < 3072 * MiB) ? MIN(dram_end, 3072 * MiB) : dram_end; 270 fdt_addr = QEMU_ALIGN_DOWN(temp - fdtsize, 2 * MiB); 271 272 ret = fdt_pack(fdt); 273 /* Should only fail if we've built a corrupted tree */ 274 g_assert(ret == 0); 275 /* copy in the device tree */ 276 qemu_fdt_dumpdtb(fdt, fdtsize); 277 278 rom_add_blob_fixed_as("fdt", fdt, fdtsize, fdt_addr, 279 &address_space_memory); 280 qemu_register_reset_nosnapshotload(qemu_fdt_randomize_seeds, 281 rom_ptr_for_as(&address_space_memory, fdt_addr, fdtsize)); 282 283 return fdt_addr; 284 } 285 286 void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base, 287 hwaddr rom_size, uint32_t reset_vec_size, 288 uint64_t kernel_entry) 289 { 290 struct fw_dynamic_info dinfo; 291 size_t dinfo_len; 292 293 if (sizeof(dinfo.magic) == 4) { 294 dinfo.magic = cpu_to_le32(FW_DYNAMIC_INFO_MAGIC_VALUE); 295 dinfo.version = cpu_to_le32(FW_DYNAMIC_INFO_VERSION); 296 dinfo.next_mode = cpu_to_le32(FW_DYNAMIC_INFO_NEXT_MODE_S); 297 dinfo.next_addr = cpu_to_le32(kernel_entry); 298 } else { 299 dinfo.magic = cpu_to_le64(FW_DYNAMIC_INFO_MAGIC_VALUE); 300 dinfo.version = cpu_to_le64(FW_DYNAMIC_INFO_VERSION); 301 dinfo.next_mode = cpu_to_le64(FW_DYNAMIC_INFO_NEXT_MODE_S); 302 dinfo.next_addr = cpu_to_le64(kernel_entry); 303 } 304 dinfo.options = 0; 305 dinfo.boot_hart = 0; 306 dinfo_len = sizeof(dinfo); 307 308 /** 309 * copy the dynamic firmware info. This information is specific to 310 * OpenSBI but doesn't break any other firmware as long as they don't 311 * expect any certain value in "a2" register. 312 */ 313 if (dinfo_len > (rom_size - reset_vec_size)) { 314 error_report("not enough space to store dynamic firmware info"); 315 exit(1); 316 } 317 318 rom_add_blob_fixed_as("mrom.finfo", &dinfo, dinfo_len, 319 rom_base + reset_vec_size, 320 &address_space_memory); 321 } 322 323 void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts, 324 hwaddr start_addr, 325 hwaddr rom_base, hwaddr rom_size, 326 uint64_t kernel_entry, 327 uint64_t fdt_load_addr) 328 { 329 int i; 330 uint32_t start_addr_hi32 = 0x00000000; 331 uint32_t fdt_load_addr_hi32 = 0x00000000; 332 333 if (!riscv_is_32bit(harts)) { 334 start_addr_hi32 = start_addr >> 32; 335 fdt_load_addr_hi32 = fdt_load_addr >> 32; 336 } 337 /* reset vector */ 338 uint32_t reset_vec[10] = { 339 0x00000297, /* 1: auipc t0, %pcrel_hi(fw_dyn) */ 340 0x02828613, /* addi a2, t0, %pcrel_lo(1b) */ 341 0xf1402573, /* csrr a0, mhartid */ 342 0, 343 0, 344 0x00028067, /* jr t0 */ 345 start_addr, /* start: .dword */ 346 start_addr_hi32, 347 fdt_load_addr, /* fdt_laddr: .dword */ 348 fdt_load_addr_hi32, 349 /* fw_dyn: */ 350 }; 351 if (riscv_is_32bit(harts)) { 352 reset_vec[3] = 0x0202a583; /* lw a1, 32(t0) */ 353 reset_vec[4] = 0x0182a283; /* lw t0, 24(t0) */ 354 } else { 355 reset_vec[3] = 0x0202b583; /* ld a1, 32(t0) */ 356 reset_vec[4] = 0x0182b283; /* ld t0, 24(t0) */ 357 } 358 359 /* copy in the reset vector in little_endian byte order */ 360 for (i = 0; i < ARRAY_SIZE(reset_vec); i++) { 361 reset_vec[i] = cpu_to_le32(reset_vec[i]); 362 } 363 rom_add_blob_fixed_as("mrom.reset", reset_vec, sizeof(reset_vec), 364 rom_base, &address_space_memory); 365 riscv_rom_copy_firmware_info(machine, rom_base, rom_size, sizeof(reset_vec), 366 kernel_entry); 367 } 368 369 void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr) 370 { 371 CPUState *cs; 372 373 for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) { 374 RISCVCPU *riscv_cpu = RISCV_CPU(cs); 375 riscv_cpu->env.kernel_addr = kernel_addr; 376 riscv_cpu->env.fdt_addr = fdt_addr; 377 } 378 } 379 380 void riscv_setup_firmware_boot(MachineState *machine) 381 { 382 if (machine->kernel_filename) { 383 FWCfgState *fw_cfg; 384 fw_cfg = fw_cfg_find(); 385 386 assert(fw_cfg); 387 /* 388 * Expose the kernel, the command line, and the initrd in fw_cfg. 389 * We don't process them here at all, it's all left to the 390 * firmware. 391 */ 392 load_image_to_fw_cfg(fw_cfg, 393 FW_CFG_KERNEL_SIZE, FW_CFG_KERNEL_DATA, 394 machine->kernel_filename, 395 true); 396 load_image_to_fw_cfg(fw_cfg, 397 FW_CFG_INITRD_SIZE, FW_CFG_INITRD_DATA, 398 machine->initrd_filename, false); 399 400 if (machine->kernel_cmdline) { 401 fw_cfg_add_i32(fw_cfg, FW_CFG_CMDLINE_SIZE, 402 strlen(machine->kernel_cmdline) + 1); 403 fw_cfg_add_string(fw_cfg, FW_CFG_CMDLINE_DATA, 404 machine->kernel_cmdline); 405 } 406 } 407 } 408