1 /* 2 * Model of Xilinx Virtex5 ML507 PPC-440 refdesign. 3 * 4 * Copyright (c) 2010 Edgar E. Iglesias. 5 * 6 * Permission is hereby granted, free of charge, to any person obtaining a copy 7 * of this software and associated documentation files (the "Software"), to deal 8 * in the Software without restriction, including without limitation the rights 9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 10 * copies of the Software, and to permit persons to whom the Software is 11 * furnished to do so, subject to the following conditions: 12 * 13 * The above copyright notice and this permission notice shall be included in 14 * all copies or substantial portions of the Software. 15 * 16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 22 * THE SOFTWARE. 23 */ 24 25 #include "qemu/osdep.h" 26 #include "qemu/units.h" 27 #include "cpu.h" 28 #include "hw/sysbus.h" 29 #include "hw/hw.h" 30 #include "hw/char/serial.h" 31 #include "hw/block/flash.h" 32 #include "sysemu/sysemu.h" 33 #include "sysemu/qtest.h" 34 #include "hw/boards.h" 35 #include "sysemu/device_tree.h" 36 #include "hw/loader.h" 37 #include "elf.h" 38 #include "qemu/error-report.h" 39 #include "qemu/log.h" 40 #include "qemu/option.h" 41 #include "exec/address-spaces.h" 42 43 #include "hw/ppc/ppc.h" 44 #include "hw/ppc/ppc4xx.h" 45 #include "ppc405.h" 46 47 #define EPAPR_MAGIC (0x45504150) 48 #define FLASH_SIZE (16 * MiB) 49 50 #define INTC_BASEADDR 0x81800000 51 #define UART16550_BASEADDR 0x83e01003 52 #define TIMER_BASEADDR 0x83c00000 53 #define PFLASH_BASEADDR 0xfc000000 54 55 #define TIMER_IRQ 3 56 #define UART16550_IRQ 9 57 58 static struct boot_info 59 { 60 uint32_t bootstrap_pc; 61 uint32_t cmdline; 62 uint32_t fdt; 63 uint32_t ima_size; 64 void *vfdt; 65 } boot_info; 66 67 /* Create reset TLB entries for BookE, spanning the 32bit addr space. */ 68 static void mmubooke_create_initial_mapping(CPUPPCState *env, 69 target_ulong va, 70 hwaddr pa) 71 { 72 ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; 73 74 tlb->attr = 0; 75 tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); 76 tlb->size = 1U << 31; /* up to 0x80000000 */ 77 tlb->EPN = va & TARGET_PAGE_MASK; 78 tlb->RPN = pa & TARGET_PAGE_MASK; 79 tlb->PID = 0; 80 81 tlb = &env->tlb.tlbe[1]; 82 tlb->attr = 0; 83 tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); 84 tlb->size = 1U << 31; /* up to 0xffffffff */ 85 tlb->EPN = 0x80000000 & TARGET_PAGE_MASK; 86 tlb->RPN = 0x80000000 & TARGET_PAGE_MASK; 87 tlb->PID = 0; 88 } 89 90 static PowerPCCPU *ppc440_init_xilinx(ram_addr_t *ram_size, 91 int do_init, 92 const char *cpu_type, 93 uint32_t sysclk) 94 { 95 PowerPCCPU *cpu; 96 CPUPPCState *env; 97 qemu_irq *irqs; 98 99 cpu = POWERPC_CPU(cpu_create(cpu_type)); 100 env = &cpu->env; 101 102 ppc_booke_timers_init(cpu, sysclk, 0/* no flags */); 103 104 ppc_dcr_init(env, NULL, NULL); 105 106 /* interrupt controller */ 107 irqs = g_new0(qemu_irq, PPCUIC_OUTPUT_NB); 108 irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; 109 irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; 110 ppcuic_init(env, irqs, 0x0C0, 0, 1); 111 return cpu; 112 } 113 114 static void main_cpu_reset(void *opaque) 115 { 116 PowerPCCPU *cpu = opaque; 117 CPUPPCState *env = &cpu->env; 118 struct boot_info *bi = env->load_info; 119 120 cpu_reset(CPU(cpu)); 121 /* Linux Kernel Parameters (passing device tree): 122 * r3: pointer to the fdt 123 * r4: 0 124 * r5: 0 125 * r6: epapr magic 126 * r7: size of IMA in bytes 127 * r8: 0 128 * r9: 0 129 */ 130 env->gpr[1] = (16 * MiB) - 8; 131 /* Provide a device-tree. */ 132 env->gpr[3] = bi->fdt; 133 env->nip = bi->bootstrap_pc; 134 135 /* Create a mapping for the kernel. */ 136 mmubooke_create_initial_mapping(env, 0, 0); 137 env->gpr[6] = tswap32(EPAPR_MAGIC); 138 env->gpr[7] = bi->ima_size; 139 } 140 141 #define BINARY_DEVICE_TREE_FILE "virtex-ml507.dtb" 142 static int xilinx_load_device_tree(hwaddr addr, 143 uint32_t ramsize, 144 hwaddr initrd_base, 145 hwaddr initrd_size, 146 const char *kernel_cmdline) 147 { 148 char *path; 149 int fdt_size; 150 void *fdt = NULL; 151 int r; 152 const char *dtb_filename; 153 154 dtb_filename = qemu_opt_get(qemu_get_machine_opts(), "dtb"); 155 if (dtb_filename) { 156 fdt = load_device_tree(dtb_filename, &fdt_size); 157 if (!fdt) { 158 error_report("Error while loading device tree file '%s'", 159 dtb_filename); 160 } 161 } else { 162 /* Try the local "ppc.dtb" override. */ 163 fdt = load_device_tree("ppc.dtb", &fdt_size); 164 if (!fdt) { 165 path = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); 166 if (path) { 167 fdt = load_device_tree(path, &fdt_size); 168 g_free(path); 169 } 170 } 171 } 172 if (!fdt) { 173 return 0; 174 } 175 176 r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 177 initrd_base); 178 if (r < 0) { 179 error_report("couldn't set /chosen/linux,initrd-start"); 180 } 181 182 r = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 183 (initrd_base + initrd_size)); 184 if (r < 0) { 185 error_report("couldn't set /chosen/linux,initrd-end"); 186 } 187 188 r = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", kernel_cmdline); 189 if (r < 0) 190 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 191 cpu_physical_memory_write(addr, fdt, fdt_size); 192 return fdt_size; 193 } 194 195 static void virtex_init(MachineState *machine) 196 { 197 ram_addr_t ram_size = machine->ram_size; 198 const char *kernel_filename = machine->kernel_filename; 199 const char *kernel_cmdline = machine->kernel_cmdline; 200 hwaddr initrd_base = 0; 201 int initrd_size = 0; 202 MemoryRegion *address_space_mem = get_system_memory(); 203 DeviceState *dev; 204 PowerPCCPU *cpu; 205 CPUPPCState *env; 206 hwaddr ram_base = 0; 207 DriveInfo *dinfo; 208 MemoryRegion *phys_ram = g_new(MemoryRegion, 1); 209 qemu_irq irq[32], *cpu_irq; 210 int kernel_size; 211 int i; 212 213 /* init CPUs */ 214 cpu = ppc440_init_xilinx(&ram_size, 1, machine->cpu_type, 400000000); 215 env = &cpu->env; 216 217 if (env->mmu_model != POWERPC_MMU_BOOKE) { 218 error_report("MMU model %i not supported by this machine", 219 env->mmu_model); 220 exit(1); 221 } 222 223 qemu_register_reset(main_cpu_reset, cpu); 224 225 memory_region_allocate_system_memory(phys_ram, NULL, "ram", ram_size); 226 memory_region_add_subregion(address_space_mem, ram_base, phys_ram); 227 228 dinfo = drive_get(IF_PFLASH, 0, 0); 229 pflash_cfi01_register(PFLASH_BASEADDR, NULL, "virtex.flash", FLASH_SIZE, 230 dinfo ? blk_by_legacy_dinfo(dinfo) : NULL, 231 64 * KiB, FLASH_SIZE >> 16, 232 1, 0x89, 0x18, 0x0000, 0x0, 1); 233 234 cpu_irq = (qemu_irq *) &env->irq_inputs[PPC40x_INPUT_INT]; 235 dev = qdev_create(NULL, "xlnx.xps-intc"); 236 qdev_prop_set_uint32(dev, "kind-of-intr", 0); 237 qdev_init_nofail(dev); 238 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, INTC_BASEADDR); 239 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, cpu_irq[0]); 240 for (i = 0; i < 32; i++) { 241 irq[i] = qdev_get_gpio_in(dev, i); 242 } 243 244 serial_mm_init(address_space_mem, UART16550_BASEADDR, 2, irq[UART16550_IRQ], 245 115200, serial_hd(0), DEVICE_LITTLE_ENDIAN); 246 247 /* 2 timers at irq 2 @ 62 Mhz. */ 248 dev = qdev_create(NULL, "xlnx.xps-timer"); 249 qdev_prop_set_uint32(dev, "one-timer-only", 0); 250 qdev_prop_set_uint32(dev, "clock-frequency", 62 * 1000000); 251 qdev_init_nofail(dev); 252 sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, TIMER_BASEADDR); 253 sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, irq[TIMER_IRQ]); 254 255 if (kernel_filename) { 256 uint64_t entry, low, high; 257 hwaddr boot_offset; 258 259 /* Boots a kernel elf binary. */ 260 kernel_size = load_elf(kernel_filename, NULL, NULL, NULL, 261 &entry, &low, &high, 1, PPC_ELF_MACHINE, 262 0, 0); 263 boot_info.bootstrap_pc = entry & 0x00ffffff; 264 265 if (kernel_size < 0) { 266 boot_offset = 0x1200000; 267 /* If we failed loading ELF's try a raw image. */ 268 kernel_size = load_image_targphys(kernel_filename, 269 boot_offset, 270 ram_size); 271 boot_info.bootstrap_pc = boot_offset; 272 high = boot_info.bootstrap_pc + kernel_size + 8192; 273 } 274 275 boot_info.ima_size = kernel_size; 276 277 /* Load initrd. */ 278 if (machine->initrd_filename) { 279 initrd_base = high = ROUND_UP(high, 4); 280 initrd_size = load_image_targphys(machine->initrd_filename, 281 high, ram_size - high); 282 283 if (initrd_size < 0) { 284 error_report("couldn't load ram disk '%s'", 285 machine->initrd_filename); 286 exit(1); 287 } 288 high = ROUND_UP(high + initrd_size, 4); 289 } 290 291 /* Provide a device-tree. */ 292 boot_info.fdt = high + (8192 * 2); 293 boot_info.fdt &= ~8191; 294 295 xilinx_load_device_tree(boot_info.fdt, ram_size, 296 initrd_base, initrd_size, 297 kernel_cmdline); 298 } 299 env->load_info = &boot_info; 300 } 301 302 static void virtex_machine_init(MachineClass *mc) 303 { 304 mc->desc = "Xilinx Virtex ML507 reference design"; 305 mc->init = virtex_init; 306 mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("440-xilinx"); 307 } 308 309 DEFINE_MACHINE("virtex-ml507", virtex_machine_init) 310