1 /* 2 * QEMU PowerPC 440 Bamboo board emulation 3 * 4 * Copyright 2007 IBM Corporation. 5 * Authors: 6 * Jerone Young <jyoung5@us.ibm.com> 7 * Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> 8 * Hollis Blanchard <hollisb@us.ibm.com> 9 * 10 * This work is licensed under the GNU GPL license version 2 or later. 11 * 12 */ 13 14 #include "qemu/osdep.h" 15 #include "qemu/units.h" 16 #include "qemu/error-report.h" 17 #include "qemu-common.h" 18 #include "qemu/datadir.h" 19 #include "qemu/error-report.h" 20 #include "net/net.h" 21 #include "hw/pci/pci.h" 22 #include "hw/boards.h" 23 #include "sysemu/kvm.h" 24 #include "kvm_ppc.h" 25 #include "sysemu/device_tree.h" 26 #include "hw/loader.h" 27 #include "elf.h" 28 #include "exec/address-spaces.h" 29 #include "hw/char/serial.h" 30 #include "hw/ppc/ppc.h" 31 #include "ppc405.h" 32 #include "sysemu/sysemu.h" 33 #include "sysemu/qtest.h" 34 #include "sysemu/reset.h" 35 #include "hw/sysbus.h" 36 37 #define BINARY_DEVICE_TREE_FILE "bamboo.dtb" 38 39 /* from u-boot */ 40 #define KERNEL_ADDR 0x1000000 41 #define FDT_ADDR 0x1800000 42 #define RAMDISK_ADDR 0x1900000 43 44 #define PPC440EP_PCI_CONFIG 0xeec00000 45 #define PPC440EP_PCI_INTACK 0xeed00000 46 #define PPC440EP_PCI_SPECIAL 0xeed00000 47 #define PPC440EP_PCI_REGS 0xef400000 48 #define PPC440EP_PCI_IO 0xe8000000 49 #define PPC440EP_PCI_IOLEN 0x00010000 50 51 #define PPC440EP_SDRAM_NR_BANKS 4 52 53 static const ram_addr_t ppc440ep_sdram_bank_sizes[] = { 54 256 * MiB, 128 * MiB, 64 * MiB, 32 * MiB, 16 * MiB, 8 * MiB, 0 55 }; 56 57 static hwaddr entry; 58 59 static int bamboo_load_device_tree(hwaddr addr, 60 uint32_t ramsize, 61 hwaddr initrd_base, 62 hwaddr initrd_size, 63 const char *kernel_cmdline) 64 { 65 int ret = -1; 66 uint32_t mem_reg_property[] = { 0, 0, cpu_to_be32(ramsize) }; 67 char *filename; 68 int fdt_size; 69 void *fdt; 70 uint32_t tb_freq = 400000000; 71 uint32_t clock_freq = 400000000; 72 73 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, BINARY_DEVICE_TREE_FILE); 74 if (!filename) { 75 return -1; 76 } 77 fdt = load_device_tree(filename, &fdt_size); 78 g_free(filename); 79 if (fdt == NULL) { 80 return -1; 81 } 82 83 /* Manipulate device tree in memory. */ 84 85 ret = qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, 86 sizeof(mem_reg_property)); 87 if (ret < 0) 88 fprintf(stderr, "couldn't set /memory/reg\n"); 89 90 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 91 initrd_base); 92 if (ret < 0) 93 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 94 95 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 96 (initrd_base + initrd_size)); 97 if (ret < 0) 98 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 99 100 ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 101 kernel_cmdline); 102 if (ret < 0) 103 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 104 105 /* Copy data from the host device tree into the guest. Since the guest can 106 * directly access the timebase without host involvement, we must expose 107 * the correct frequencies. */ 108 if (kvm_enabled()) { 109 tb_freq = kvmppc_get_tbfreq(); 110 clock_freq = kvmppc_get_clockfreq(); 111 } 112 113 qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "clock-frequency", 114 clock_freq); 115 qemu_fdt_setprop_cell(fdt, "/cpus/cpu@0", "timebase-frequency", 116 tb_freq); 117 118 rom_add_blob_fixed(BINARY_DEVICE_TREE_FILE, fdt, fdt_size, addr); 119 g_free(fdt); 120 return 0; 121 } 122 123 /* Create reset TLB entries for BookE, spanning the 32bit addr space. */ 124 static void mmubooke_create_initial_mapping(CPUPPCState *env, 125 target_ulong va, 126 hwaddr pa) 127 { 128 ppcemb_tlb_t *tlb = &env->tlb.tlbe[0]; 129 130 tlb->attr = 0; 131 tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); 132 tlb->size = 1U << 31; /* up to 0x80000000 */ 133 tlb->EPN = va & TARGET_PAGE_MASK; 134 tlb->RPN = pa & TARGET_PAGE_MASK; 135 tlb->PID = 0; 136 137 tlb = &env->tlb.tlbe[1]; 138 tlb->attr = 0; 139 tlb->prot = PAGE_VALID | ((PAGE_READ | PAGE_WRITE | PAGE_EXEC) << 4); 140 tlb->size = 1U << 31; /* up to 0xffffffff */ 141 tlb->EPN = 0x80000000 & TARGET_PAGE_MASK; 142 tlb->RPN = 0x80000000 & TARGET_PAGE_MASK; 143 tlb->PID = 0; 144 } 145 146 static void main_cpu_reset(void *opaque) 147 { 148 PowerPCCPU *cpu = opaque; 149 CPUPPCState *env = &cpu->env; 150 151 cpu_reset(CPU(cpu)); 152 env->gpr[1] = (16 * MiB) - 8; 153 env->gpr[3] = FDT_ADDR; 154 env->nip = entry; 155 156 /* Create a mapping for the kernel. */ 157 mmubooke_create_initial_mapping(env, 0, 0); 158 } 159 160 static void bamboo_init(MachineState *machine) 161 { 162 const char *kernel_filename = machine->kernel_filename; 163 const char *kernel_cmdline = machine->kernel_cmdline; 164 const char *initrd_filename = machine->initrd_filename; 165 unsigned int pci_irq_nrs[4] = { 28, 27, 26, 25 }; 166 MemoryRegion *address_space_mem = get_system_memory(); 167 MemoryRegion *isa = g_new(MemoryRegion, 1); 168 MemoryRegion *ram_memories = g_new(MemoryRegion, PPC440EP_SDRAM_NR_BANKS); 169 hwaddr ram_bases[PPC440EP_SDRAM_NR_BANKS]; 170 hwaddr ram_sizes[PPC440EP_SDRAM_NR_BANKS]; 171 qemu_irq *pic; 172 qemu_irq *irqs; 173 PCIBus *pcibus; 174 PowerPCCPU *cpu; 175 CPUPPCState *env; 176 target_long initrd_size = 0; 177 DeviceState *dev; 178 int success; 179 int i; 180 181 cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); 182 env = &cpu->env; 183 184 if (env->mmu_model != POWERPC_MMU_BOOKE) { 185 error_report("MMU model %i not supported by this machine", 186 env->mmu_model); 187 exit(1); 188 } 189 190 qemu_register_reset(main_cpu_reset, cpu); 191 ppc_booke_timers_init(cpu, 400000000, 0); 192 ppc_dcr_init(env, NULL, NULL); 193 194 /* interrupt controller */ 195 irqs = g_new0(qemu_irq, PPCUIC_OUTPUT_NB); 196 irqs[PPCUIC_OUTPUT_INT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_INT]; 197 irqs[PPCUIC_OUTPUT_CINT] = ((qemu_irq *)env->irq_inputs)[PPC40x_INPUT_CINT]; 198 pic = ppcuic_init(env, irqs, 0x0C0, 0, 1); 199 200 /* SDRAM controller */ 201 memset(ram_bases, 0, sizeof(ram_bases)); 202 memset(ram_sizes, 0, sizeof(ram_sizes)); 203 ppc4xx_sdram_banks(machine->ram, PPC440EP_SDRAM_NR_BANKS, ram_memories, 204 ram_bases, ram_sizes, ppc440ep_sdram_bank_sizes); 205 /* XXX 440EP's ECC interrupts are on UIC1, but we've only created UIC0. */ 206 ppc4xx_sdram_init(env, pic[14], PPC440EP_SDRAM_NR_BANKS, ram_memories, 207 ram_bases, ram_sizes, 1); 208 209 /* PCI */ 210 dev = sysbus_create_varargs(TYPE_PPC4xx_PCI_HOST_BRIDGE, 211 PPC440EP_PCI_CONFIG, 212 pic[pci_irq_nrs[0]], pic[pci_irq_nrs[1]], 213 pic[pci_irq_nrs[2]], pic[pci_irq_nrs[3]], 214 NULL); 215 pcibus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); 216 if (!pcibus) { 217 error_report("couldn't create PCI controller"); 218 exit(1); 219 } 220 221 memory_region_init_alias(isa, NULL, "isa_mmio", 222 get_system_io(), 0, PPC440EP_PCI_IOLEN); 223 memory_region_add_subregion(get_system_memory(), PPC440EP_PCI_IO, isa); 224 225 if (serial_hd(0) != NULL) { 226 serial_mm_init(address_space_mem, 0xef600300, 0, pic[0], 227 PPC_SERIAL_MM_BAUDBASE, serial_hd(0), 228 DEVICE_BIG_ENDIAN); 229 } 230 if (serial_hd(1) != NULL) { 231 serial_mm_init(address_space_mem, 0xef600400, 0, pic[1], 232 PPC_SERIAL_MM_BAUDBASE, serial_hd(1), 233 DEVICE_BIG_ENDIAN); 234 } 235 236 if (pcibus) { 237 /* Register network interfaces. */ 238 for (i = 0; i < nb_nics; i++) { 239 /* There are no PCI NICs on the Bamboo board, but there are 240 * PCI slots, so we can pick whatever default model we want. */ 241 pci_nic_init_nofail(&nd_table[i], pcibus, "e1000", NULL); 242 } 243 } 244 245 /* Load kernel. */ 246 if (kernel_filename) { 247 hwaddr loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; 248 success = load_uimage(kernel_filename, &entry, &loadaddr, NULL, 249 NULL, NULL); 250 if (success < 0) { 251 uint64_t elf_entry; 252 success = load_elf(kernel_filename, NULL, NULL, NULL, &elf_entry, 253 NULL, NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0); 254 entry = elf_entry; 255 } 256 /* XXX try again as binary */ 257 if (success < 0) { 258 error_report("could not load kernel '%s'", kernel_filename); 259 exit(1); 260 } 261 } 262 263 /* Load initrd. */ 264 if (initrd_filename) { 265 initrd_size = load_image_targphys(initrd_filename, RAMDISK_ADDR, 266 machine->ram_size - RAMDISK_ADDR); 267 268 if (initrd_size < 0) { 269 error_report("could not load ram disk '%s' at %x", 270 initrd_filename, RAMDISK_ADDR); 271 exit(1); 272 } 273 } 274 275 /* If we're loading a kernel directly, we must load the device tree too. */ 276 if (kernel_filename) { 277 if (bamboo_load_device_tree(FDT_ADDR, machine->ram_size, RAMDISK_ADDR, 278 initrd_size, kernel_cmdline) < 0) { 279 error_report("couldn't load device tree"); 280 exit(1); 281 } 282 } 283 } 284 285 static void bamboo_machine_init(MachineClass *mc) 286 { 287 mc->desc = "bamboo"; 288 mc->init = bamboo_init; 289 mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("440epb"); 290 mc->default_ram_id = "ppc4xx.sdram"; 291 } 292 293 DEFINE_MACHINE("bamboo", bamboo_machine_init) 294