xref: /openbmc/qemu/hw/ppc/pnv_i2c.c (revision ee48fef0)
1 /*
2  * QEMU PowerPC PowerNV Processor I2C model
3  *
4  * Copyright (c) 2019-2023, IBM Corporation.
5  *
6  * SPDX-License-Identifier: GPL-2.0-or-later
7  */
8 
9 #include "qemu/osdep.h"
10 #include "qemu/module.h"
11 #include "qemu/log.h"
12 #include "sysemu/reset.h"
13 
14 #include "hw/irq.h"
15 #include "hw/qdev-properties.h"
16 
17 #include "hw/ppc/pnv.h"
18 #include "hw/ppc/pnv_chip.h"
19 #include "hw/ppc/pnv_i2c.h"
20 #include "hw/ppc/pnv_xscom.h"
21 #include "hw/ppc/fdt.h"
22 
23 #include <libfdt.h>
24 
25 #include "hw/i2c/pnv_i2c_regs.h"
26 
27 static I2CBus *pnv_i2c_get_bus(PnvI2C *i2c)
28 {
29     uint8_t port = GETFIELD(I2C_MODE_PORT_NUM, i2c->regs[I2C_MODE_REG]);
30 
31     if (port >= i2c->num_busses) {
32         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid bus number %d/%d\n", port,
33                       i2c->num_busses);
34         return NULL;
35     }
36     return i2c->busses[port];
37 }
38 
39 static void pnv_i2c_update_irq(PnvI2C *i2c)
40 {
41     I2CBus *bus = pnv_i2c_get_bus(i2c);
42     bool recv = !!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE);
43     uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END,
44                                   i2c->regs[I2C_RESIDUAL_LEN_REG]);
45     uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END,
46                                  i2c->regs[I2C_RESIDUAL_LEN_REG]);
47     uint8_t fifo_count = GETFIELD(I2C_STAT_FIFO_ENTRY_COUNT,
48                                    i2c->regs[I2C_STAT_REG]);
49     uint8_t fifo_free = PNV_I2C_FIFO_SIZE - fifo_count;
50 
51     if (!bus) {
52         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
53         return;
54     }
55 
56     if (i2c_bus_busy(bus)) {
57         i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ;
58 
59         if (recv) {
60             if (fifo_count >=
61                 GETFIELD(I2C_WATERMARK_HIGH, i2c->regs[I2C_WATERMARK_REG])) {
62                 i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_HIGH_WATER;
63             } else {
64                 i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_HIGH_WATER;
65             }
66 
67             if (((i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_HIGH_WATER) &&
68                  fifo_count != 0) || front_end == 0) {
69                 i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ;
70             }
71         } else {
72             if (fifo_count <=
73                 GETFIELD(I2C_WATERMARK_LOW, i2c->regs[I2C_WATERMARK_REG])) {
74                 i2c->regs[I2C_EXTD_STAT_REG] |= I2C_EXTD_STAT_LOW_WATER;
75             } else {
76                 i2c->regs[I2C_EXTD_STAT_REG] &= ~I2C_EXTD_STAT_LOW_WATER;
77             }
78 
79             if (back_end > 0 &&
80                 (fifo_free >= back_end ||
81                  (i2c->regs[I2C_EXTD_STAT_REG] & I2C_EXTD_STAT_LOW_WATER))) {
82                 i2c->regs[I2C_STAT_REG] |= I2C_STAT_DATA_REQ;
83             }
84         }
85 
86         if (back_end == 0 && front_end == 0) {
87             i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_DATA_REQ;
88             i2c->regs[I2C_STAT_REG] |= I2C_STAT_CMD_COMP;
89 
90             if (i2c->regs[I2C_CMD_REG] & I2C_CMD_WITH_STOP) {
91                 i2c_end_transfer(bus);
92                 i2c->regs[I2C_EXTD_STAT_REG] &=
93                     ~(I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY);
94             }
95         } else {
96             i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_CMD_COMP;
97         }
98     }
99 
100     /*
101      * Status and interrupt registers have nearly the same layout.
102      */
103     i2c->regs[I2C_INTR_RAW_COND_REG] = i2c->regs[I2C_STAT_REG] >> 16;
104     i2c->regs[I2C_INTR_COND_REG] =
105         i2c->regs[I2C_INTR_RAW_COND_REG] & i2c->regs[I2C_INTR_MASK_REG];
106 
107     qemu_set_irq(i2c->psi_irq, i2c->regs[I2C_INTR_COND_REG] != 0);
108 }
109 
110 static void pnv_i2c_fifo_update_count(PnvI2C *i2c)
111 {
112     uint64_t stat = i2c->regs[I2C_STAT_REG];
113 
114     i2c->regs[I2C_STAT_REG] = SETFIELD(I2C_STAT_FIFO_ENTRY_COUNT, stat,
115                                        fifo8_num_used(&i2c->fifo));
116 }
117 
118 static void pnv_i2c_frontend_update(PnvI2C *i2c)
119 {
120     uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG];
121     uint16_t front_end = GETFIELD(I2C_RESIDUAL_FRONT_END, residual_end);
122 
123     i2c->regs[I2C_RESIDUAL_LEN_REG] =
124         SETFIELD(I2C_RESIDUAL_FRONT_END, residual_end, front_end - 1);
125 }
126 
127 static void pnv_i2c_fifo_flush(PnvI2C *i2c)
128 {
129     I2CBus *bus = pnv_i2c_get_bus(i2c);
130     uint8_t data;
131     int ret;
132 
133     if (!bus) {
134         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
135         return;
136     }
137     if (!i2c_bus_busy(bus)) {
138         return;
139     }
140 
141     if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) {
142         if (fifo8_is_full(&i2c->fifo)) {
143             return;
144         }
145 
146         data = i2c_recv(bus);
147         fifo8_push(&i2c->fifo, data);
148     } else {
149         if (fifo8_is_empty(&i2c->fifo)) {
150             return;
151         }
152 
153         data = fifo8_pop(&i2c->fifo);
154         ret = i2c_send(bus, data);
155         if (ret) {
156             i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR;
157             i2c_end_transfer(bus);
158         }
159     }
160 
161     pnv_i2c_fifo_update_count(i2c);
162     pnv_i2c_frontend_update(i2c);
163 }
164 
165 static void pnv_i2c_handle_cmd(PnvI2C *i2c, uint64_t val)
166 {
167     I2CBus *bus = pnv_i2c_get_bus(i2c);
168     uint8_t addr = GETFIELD(I2C_CMD_DEV_ADDR, val);
169     int recv = !!(val & I2C_CMD_READ_NOT_WRITE);
170     uint32_t len_bytes = GETFIELD(I2C_CMD_LEN_BYTES, val);
171 
172     if (!(val & I2C_CMD_WITH_START) && !(val & I2C_CMD_WITH_ADDR) &&
173         !(val & I2C_CMD_WITH_STOP) && !len_bytes) {
174         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
175         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid command 0x%"PRIx64"\n",
176                       val);
177         return;
178     }
179 
180     if (!(i2c->regs[I2C_STAT_REG] & I2C_STAT_CMD_COMP)) {
181         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
182         qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n");
183         return;
184     }
185 
186     if (!bus) {
187         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
188         return;
189     }
190 
191     i2c->regs[I2C_RESIDUAL_LEN_REG] =
192         SETFIELD(I2C_RESIDUAL_FRONT_END, 0ull, len_bytes) |
193         SETFIELD(I2C_RESIDUAL_BACK_END, 0ull, len_bytes);
194 
195     if (val & I2C_CMD_WITH_START) {
196         if (i2c_start_transfer(bus, addr, recv)) {
197             i2c->regs[I2C_STAT_REG] |= I2C_STAT_NACK_RCVD_ERR;
198         } else {
199             i2c->regs[I2C_EXTD_STAT_REG] |=
200                 (I2C_EXTD_STAT_I2C_BUSY | I2C_EXTD_STAT_SELF_BUSY);
201             pnv_i2c_fifo_flush(i2c);
202         }
203     }
204 }
205 
206 static void pnv_i2c_backend_update(PnvI2C *i2c)
207 {
208     uint64_t residual_end = i2c->regs[I2C_RESIDUAL_LEN_REG];
209     uint16_t back_end = GETFIELD(I2C_RESIDUAL_BACK_END, residual_end);
210 
211     if (!back_end) {
212         i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_ACCESS_ERR;
213         return;
214     }
215 
216     i2c->regs[I2C_RESIDUAL_LEN_REG] =
217         SETFIELD(I2C_RESIDUAL_BACK_END, residual_end, back_end - 1);
218 }
219 
220 static void pnv_i2c_fifo_in(PnvI2C *i2c)
221 {
222     uint8_t data = GETFIELD(I2C_FIFO, i2c->regs[I2C_FIFO_REG]);
223     I2CBus *bus = pnv_i2c_get_bus(i2c);
224 
225     if (!bus) {
226         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
227         return;
228     }
229 
230     if (!i2c_bus_busy(bus)) {
231         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
232         qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n");
233         return;
234     }
235 
236     if (i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE) {
237         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
238         qemu_log_mask(LOG_GUEST_ERROR, "I2C: read command in progress\n");
239         return;
240     }
241 
242     if (fifo8_is_full(&i2c->fifo)) {
243         if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) {
244             i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR;
245         }
246         return;
247     }
248 
249     fifo8_push(&i2c->fifo, data);
250     pnv_i2c_fifo_update_count(i2c);
251     pnv_i2c_backend_update(i2c);
252     pnv_i2c_fifo_flush(i2c);
253 }
254 
255 static void pnv_i2c_fifo_out(PnvI2C *i2c)
256 {
257     uint8_t data;
258     I2CBus *bus = pnv_i2c_get_bus(i2c);
259 
260     if (!bus) {
261         qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
262         return;
263     }
264 
265     if (!i2c_bus_busy(bus)) {
266         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
267         qemu_log_mask(LOG_GUEST_ERROR, "I2C: no command in progress\n");
268         return;
269     }
270 
271     if (!(i2c->regs[I2C_CMD_REG] & I2C_CMD_READ_NOT_WRITE)) {
272         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
273         qemu_log_mask(LOG_GUEST_ERROR, "I2C: write command in progress\n");
274         return;
275     }
276 
277     if (fifo8_is_empty(&i2c->fifo)) {
278         if (!(i2c->regs[I2C_MODE_REG] & I2C_MODE_PACING_ALLOW)) {
279             i2c->regs[I2C_STAT_REG] |= I2C_STAT_BKEND_OVERRUN_ERR;
280         }
281         return;
282     }
283 
284     data = fifo8_pop(&i2c->fifo);
285 
286     i2c->regs[I2C_FIFO_REG] = SETFIELD(I2C_FIFO, 0ull, data);
287     pnv_i2c_fifo_update_count(i2c);
288     pnv_i2c_backend_update(i2c);
289 }
290 
291 static uint64_t pnv_i2c_xscom_read(void *opaque, hwaddr addr,
292                                    unsigned size)
293 {
294     PnvI2C *i2c = PNV_I2C(opaque);
295     uint32_t offset = addr >> 3;
296     uint64_t val = -1;
297     int i;
298 
299     switch (offset) {
300     case I2C_STAT_REG:
301         val = i2c->regs[offset];
302         break;
303 
304     case I2C_FIFO_REG:
305         pnv_i2c_fifo_out(i2c);
306         val = i2c->regs[offset];
307         break;
308 
309     case I2C_PORT_BUSY_REG: /* compute busy bit for each port  */
310         val = 0;
311         for (i = 0; i < i2c->num_busses; i++) {
312             val |= (uint64_t)i2c_bus_busy(i2c->busses[i]) << i;
313         }
314         break;
315 
316     case I2C_CMD_REG:
317     case I2C_MODE_REG:
318     case I2C_WATERMARK_REG:
319     case I2C_INTR_MASK_REG:
320     case I2C_INTR_RAW_COND_REG:
321     case I2C_INTR_COND_REG:
322     case I2C_EXTD_STAT_REG:
323     case I2C_RESIDUAL_LEN_REG:
324         val = i2c->regs[offset];
325         break;
326     default:
327         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
328         qemu_log_mask(LOG_GUEST_ERROR, "I2C: read at register: 0x%"
329                       HWADDR_PRIx "\n", addr >> 3);
330     }
331 
332     pnv_i2c_update_irq(i2c);
333 
334     return val;
335 }
336 
337 static void pnv_i2c_reset(void *dev)
338 {
339     PnvI2C *i2c = PNV_I2C(dev);
340 
341     memset(i2c->regs, 0, sizeof(i2c->regs));
342 
343     i2c->regs[I2C_STAT_REG] =
344         SETFIELD(I2C_STAT_UPPER_THRS, 0ull, i2c->num_busses - 1) |
345         I2C_STAT_CMD_COMP | I2C_STAT_SCL_INPUT_LEVEL |
346         I2C_STAT_SDA_INPUT_LEVEL;
347     i2c->regs[I2C_EXTD_STAT_REG] =
348         SETFIELD(I2C_EXTD_STAT_FIFO_SIZE, 0ull, PNV_I2C_FIFO_SIZE) |
349         SETFIELD(I2C_EXTD_STAT_I2C_VERSION, 0ull, 23); /* last version */
350 
351     fifo8_reset(&i2c->fifo);
352 }
353 
354 static void pnv_i2c_xscom_write(void *opaque, hwaddr addr,
355                                 uint64_t val, unsigned size)
356 {
357     PnvI2C *i2c = PNV_I2C(opaque);
358     uint32_t offset = addr >> 3;
359 
360     switch (offset) {
361     case I2C_MODE_REG:
362         {
363             i2c->regs[offset] = val;
364             I2CBus *bus = pnv_i2c_get_bus(i2c);
365             if (!bus) {
366                 qemu_log_mask(LOG_GUEST_ERROR, "I2C: invalid port\n");
367                 return;
368             }
369             if (i2c_bus_busy(bus)) {
370                 i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
371                 qemu_log_mask(LOG_GUEST_ERROR, "I2C: command in progress\n");
372             }
373         }
374         break;
375 
376     case I2C_CMD_REG:
377         i2c->regs[offset] = val;
378         pnv_i2c_handle_cmd(i2c, val);
379         break;
380 
381     case I2C_FIFO_REG:
382         i2c->regs[offset] = val;
383         pnv_i2c_fifo_in(i2c);
384         break;
385 
386     case I2C_WATERMARK_REG:
387         i2c->regs[offset] = val;
388         break;
389 
390     case I2C_RESET_I2C_REG:
391         pnv_i2c_reset(i2c);
392         break;
393 
394     case I2C_RESET_ERRORS:
395         i2c->regs[I2C_STAT_REG] &= ~I2C_STAT_ANY_ERR;
396         i2c->regs[I2C_RESIDUAL_LEN_REG] = 0;
397         i2c->regs[I2C_EXTD_STAT_REG] &=
398             (I2C_EXTD_STAT_FIFO_SIZE | I2C_EXTD_STAT_I2C_VERSION);
399         fifo8_reset(&i2c->fifo);
400         break;
401 
402     case I2C_INTR_MASK_REG:
403         i2c->regs[offset] = val;
404         break;
405 
406     case I2C_INTR_MASK_OR_REG:
407         i2c->regs[I2C_INTR_MASK_REG] |= val;
408         break;
409 
410     case I2C_INTR_MASK_AND_REG:
411         i2c->regs[I2C_INTR_MASK_REG] &= val;
412         break;
413 
414     case I2C_PORT_BUSY_REG:
415     case I2C_SET_S_SCL_REG:
416     case I2C_RESET_S_SCL_REG:
417     case I2C_SET_S_SDA_REG:
418     case I2C_RESET_S_SDA_REG:
419         i2c->regs[offset] = val;
420         break;
421     default:
422         i2c->regs[I2C_STAT_REG] |= I2C_STAT_INVALID_CMD;
423         qemu_log_mask(LOG_GUEST_ERROR, "I2C: write at register: 0x%"
424                       HWADDR_PRIx " val=0x%"PRIx64"\n", addr >> 3, val);
425     }
426 
427     pnv_i2c_update_irq(i2c);
428 }
429 
430 static const MemoryRegionOps pnv_i2c_xscom_ops = {
431     .read = pnv_i2c_xscom_read,
432     .write = pnv_i2c_xscom_write,
433     .valid.min_access_size = 8,
434     .valid.max_access_size = 8,
435     .impl.min_access_size = 8,
436     .impl.max_access_size = 8,
437     .endianness = DEVICE_BIG_ENDIAN,
438 };
439 
440 static int pnv_i2c_bus_dt_xscom(PnvI2C *i2c, void *fdt,
441                                 int offset, int index)
442 {
443     int i2c_bus_offset;
444     const char i2c_compat[] =
445         "ibm,opal-i2c\0ibm,power8-i2c-port\0ibm,power9-i2c-port";
446     g_autofree char *i2c_port_name = NULL;
447     g_autofree char *name = g_strdup_printf("i2c-bus@%x", index);
448 
449     i2c_bus_offset = fdt_add_subnode(fdt, offset, name);
450     _FDT(i2c_bus_offset);
451 
452     _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "reg", index)));
453     _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#address-cells", 1)));
454     _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "#size-cells", 0)));
455     _FDT(fdt_setprop(fdt, i2c_bus_offset, "compatible", i2c_compat,
456                      sizeof(i2c_compat)));
457     _FDT((fdt_setprop_cell(fdt, i2c_bus_offset, "bus-frequency", 400000)));
458 
459     i2c_port_name = g_strdup_printf("p8_%08x_e%dp%d", i2c->chip->chip_id,
460                                     i2c->engine, index);
461     _FDT(fdt_setprop_string(fdt, i2c_bus_offset, "ibm,port-name",
462                             i2c_port_name));
463     return 0;
464 }
465 
466 #define XSCOM_BUS_FREQUENCY 466500000
467 #define I2C_CLOCK_FREQUENCY (XSCOM_BUS_FREQUENCY / 4)
468 
469 static int pnv_i2c_dt_xscom(PnvXScomInterface *dev, void *fdt,
470                             int offset)
471 {
472     PnvI2C *i2c = PNV_I2C(dev);
473     int i2c_offset;
474     const char i2c_compat[] = "ibm,power8-i2cm\0ibm,power9-i2cm";
475     uint32_t i2c_pcba = PNV9_XSCOM_I2CM_BASE +
476         (i2c->engine - 1) * PNV9_XSCOM_I2CM_SIZE;
477     uint32_t reg[2] = {
478         cpu_to_be32(i2c_pcba),
479         cpu_to_be32(PNV9_XSCOM_I2CM_SIZE)
480     };
481     int i;
482     g_autofree char *name = g_strdup_printf("i2cm@%x", i2c_pcba);
483 
484     i2c_offset = fdt_add_subnode(fdt, offset, name);
485     _FDT(i2c_offset);
486 
487     _FDT(fdt_setprop(fdt, i2c_offset, "reg", reg, sizeof(reg)));
488 
489     _FDT((fdt_setprop_cell(fdt, i2c_offset, "#address-cells", 1)));
490     _FDT((fdt_setprop_cell(fdt, i2c_offset, "#size-cells", 0)));
491     _FDT(fdt_setprop(fdt, i2c_offset, "compatible", i2c_compat,
492                      sizeof(i2c_compat)));
493     _FDT((fdt_setprop_cell(fdt, i2c_offset, "chip-engine#", i2c->engine)));
494     _FDT((fdt_setprop_cell(fdt, i2c_offset, "clock-frequency",
495                            I2C_CLOCK_FREQUENCY)));
496 
497     for (i = 0; i < i2c->num_busses; i++) {
498         pnv_i2c_bus_dt_xscom(i2c, fdt, i2c_offset, i);
499     }
500     return 0;
501 }
502 
503 static void pnv_i2c_sys_reset(void *dev)
504 {
505     int port;
506     PnvI2C *i2c = PNV_I2C(dev);
507 
508     pnv_i2c_reset(dev);
509 
510     /* reset all buses connected to this i2c controller */
511     for (port = 0; port < i2c->num_busses; port++) {
512         bus_cold_reset(BUS(i2c->busses[port]));
513     }
514 }
515 
516 static void pnv_i2c_realize(DeviceState *dev, Error **errp)
517 {
518     PnvI2C *i2c = PNV_I2C(dev);
519     int i;
520 
521     assert(i2c->chip);
522 
523     if (i2c->num_busses > PNV_I2C_MAX_BUSSES) {
524         error_setg(errp, "Invalid number of busses: %u", i2c->num_busses);
525         return;
526     }
527 
528     pnv_xscom_region_init(&i2c->xscom_regs, OBJECT(i2c), &pnv_i2c_xscom_ops,
529                           i2c, "xscom-i2c", PNV9_XSCOM_I2CM_SIZE);
530 
531     i2c->busses = g_new(I2CBus *, i2c->num_busses);
532     for (i = 0; i < i2c->num_busses; i++) {
533         char name[32];
534 
535         snprintf(name, sizeof(name), TYPE_PNV_I2C ".%d", i);
536         i2c->busses[i] = i2c_init_bus(dev, name);
537     }
538 
539     fifo8_create(&i2c->fifo, PNV_I2C_FIFO_SIZE);
540 
541     qemu_register_reset(pnv_i2c_sys_reset, dev);
542 
543     qdev_init_gpio_out(DEVICE(dev), &i2c->psi_irq, 1);
544 }
545 
546 static Property pnv_i2c_properties[] = {
547     DEFINE_PROP_LINK("chip", PnvI2C, chip, TYPE_PNV_CHIP, PnvChip *),
548     DEFINE_PROP_UINT32("engine", PnvI2C, engine, 1),
549     DEFINE_PROP_UINT32("num-busses", PnvI2C, num_busses, 1),
550     DEFINE_PROP_END_OF_LIST(),
551 };
552 
553 static void pnv_i2c_class_init(ObjectClass *klass, void *data)
554 {
555     DeviceClass *dc = DEVICE_CLASS(klass);
556     PnvXScomInterfaceClass *xscomc = PNV_XSCOM_INTERFACE_CLASS(klass);
557 
558     xscomc->dt_xscom = pnv_i2c_dt_xscom;
559 
560     /* Reason: This device is part of the CPU and cannot be used separately */
561     dc->user_creatable = false;
562 
563     dc->desc = "PowerNV I2C";
564     dc->realize = pnv_i2c_realize;
565     device_class_set_props(dc, pnv_i2c_properties);
566 }
567 
568 static const TypeInfo pnv_i2c_info = {
569     .name          = TYPE_PNV_I2C,
570     .parent        = TYPE_DEVICE,
571     .instance_size = sizeof(PnvI2C),
572     .class_init    = pnv_i2c_class_init,
573     .interfaces    = (InterfaceInfo[]) {
574         { TYPE_PNV_XSCOM_INTERFACE },
575         { }
576     }
577 };
578 
579 static void pnv_i2c_register_types(void)
580 {
581     type_register_static(&pnv_i2c_info);
582 }
583 
584 type_init(pnv_i2c_register_types);
585