1 2 /* 3 * QEMU OldWorld PowerMac (currently ~G3 Beige) hardware System Emulator 4 * 5 * Copyright (c) 2004-2007 Fabrice Bellard 6 * Copyright (c) 2007 Jocelyn Mayer 7 * 8 * Permission is hereby granted, free of charge, to any person obtaining a copy 9 * of this software and associated documentation files (the "Software"), to deal 10 * in the Software without restriction, including without limitation the rights 11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 12 * copies of the Software, and to permit persons to whom the Software is 13 * furnished to do so, subject to the following conditions: 14 * 15 * The above copyright notice and this permission notice shall be included in 16 * all copies or substantial portions of the Software. 17 * 18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 24 * THE SOFTWARE. 25 */ 26 27 #include "qemu/osdep.h" 28 #include "qemu/datadir.h" 29 #include "qemu/units.h" 30 #include "qapi/error.h" 31 #include "hw/ppc/ppc.h" 32 #include "hw/qdev-properties.h" 33 #include "mac.h" 34 #include "hw/input/adb.h" 35 #include "sysemu/sysemu.h" 36 #include "net/net.h" 37 #include "hw/isa/isa.h" 38 #include "hw/pci/pci.h" 39 #include "hw/pci/pci_host.h" 40 #include "hw/nvram/fw_cfg.h" 41 #include "hw/char/escc.h" 42 #include "hw/misc/macio/macio.h" 43 #include "hw/loader.h" 44 #include "hw/fw-path-provider.h" 45 #include "elf.h" 46 #include "qemu/error-report.h" 47 #include "sysemu/kvm.h" 48 #include "sysemu/reset.h" 49 #include "kvm_ppc.h" 50 51 #define MAX_IDE_BUS 2 52 #define CFG_ADDR 0xf0000510 53 #define TBFREQ 16600000UL 54 #define CLOCKFREQ 266000000UL 55 #define BUSFREQ 66000000UL 56 57 #define NDRV_VGA_FILENAME "qemu_vga.ndrv" 58 59 #define GRACKLE_BASE 0xfec00000 60 #define PROM_BASE 0xffc00000 61 #define PROM_SIZE (4 * MiB) 62 63 static void fw_cfg_boot_set(void *opaque, const char *boot_device, 64 Error **errp) 65 { 66 fw_cfg_modify_i16(opaque, FW_CFG_BOOT_DEVICE, boot_device[0]); 67 } 68 69 static uint64_t translate_kernel_address(void *opaque, uint64_t addr) 70 { 71 return (addr & 0x0fffffff) + KERNEL_LOAD_ADDR; 72 } 73 74 static void ppc_heathrow_reset(void *opaque) 75 { 76 PowerPCCPU *cpu = opaque; 77 78 cpu_reset(CPU(cpu)); 79 } 80 81 static void ppc_heathrow_init(MachineState *machine) 82 { 83 ram_addr_t ram_size = machine->ram_size; 84 const char *bios_name = machine->firmware ?: PROM_FILENAME; 85 const char *boot_device = machine->boot_config.order; 86 PowerPCCPU *cpu = NULL; 87 CPUPPCState *env = NULL; 88 char *filename; 89 int i; 90 MemoryRegion *bios = g_new(MemoryRegion, 1); 91 uint32_t kernel_base, initrd_base, cmdline_base = 0; 92 int32_t kernel_size, initrd_size; 93 PCIBus *pci_bus; 94 PCIDevice *macio; 95 MACIOIDEState *macio_ide; 96 ESCCState *escc; 97 SysBusDevice *s; 98 DeviceState *dev, *pic_dev, *grackle_dev; 99 BusState *adb_bus; 100 uint64_t bios_addr; 101 int bios_size; 102 unsigned int smp_cpus = machine->smp.cpus; 103 uint16_t ppc_boot_device; 104 DriveInfo *hd[MAX_IDE_BUS * MAX_IDE_DEVS]; 105 void *fw_cfg; 106 uint64_t tbfreq; 107 108 /* init CPUs */ 109 for (i = 0; i < smp_cpus; i++) { 110 cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); 111 env = &cpu->env; 112 113 /* Set time-base frequency to 16.6 Mhz */ 114 cpu_ppc_tb_init(env, TBFREQ); 115 qemu_register_reset(ppc_heathrow_reset, cpu); 116 } 117 118 /* allocate RAM */ 119 if (ram_size > 2047 * MiB) { 120 error_report("Too much memory for this machine: %" PRId64 " MB, " 121 "maximum 2047 MB", ram_size / MiB); 122 exit(1); 123 } 124 125 memory_region_add_subregion(get_system_memory(), 0, machine->ram); 126 127 /* allocate and load firmware ROM */ 128 memory_region_init_rom(bios, NULL, "ppc_heathrow.bios", PROM_SIZE, 129 &error_fatal); 130 memory_region_add_subregion(get_system_memory(), PROM_BASE, bios); 131 132 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, bios_name); 133 if (filename) { 134 /* Load OpenBIOS (ELF) */ 135 bios_size = load_elf(filename, NULL, NULL, NULL, NULL, &bios_addr, 136 NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0); 137 /* Unfortunately, load_elf sign-extends reading elf32 */ 138 bios_addr = (uint32_t)bios_addr; 139 140 if (bios_size <= 0) { 141 /* or if could not load ELF try loading a binary ROM image */ 142 bios_size = load_image_targphys(filename, PROM_BASE, PROM_SIZE); 143 bios_addr = PROM_BASE; 144 } 145 g_free(filename); 146 } else { 147 bios_size = -1; 148 } 149 if (bios_size < 0 || bios_addr - PROM_BASE + bios_size > PROM_SIZE) { 150 error_report("could not load PowerPC bios '%s'", bios_name); 151 exit(1); 152 } 153 154 if (machine->kernel_filename) { 155 int bswap_needed; 156 157 #ifdef BSWAP_NEEDED 158 bswap_needed = 1; 159 #else 160 bswap_needed = 0; 161 #endif 162 kernel_base = KERNEL_LOAD_ADDR; 163 kernel_size = load_elf(machine->kernel_filename, NULL, 164 translate_kernel_address, NULL, NULL, NULL, 165 NULL, NULL, 1, PPC_ELF_MACHINE, 0, 0); 166 if (kernel_size < 0) 167 kernel_size = load_aout(machine->kernel_filename, kernel_base, 168 ram_size - kernel_base, bswap_needed, 169 TARGET_PAGE_SIZE); 170 if (kernel_size < 0) 171 kernel_size = load_image_targphys(machine->kernel_filename, 172 kernel_base, 173 ram_size - kernel_base); 174 if (kernel_size < 0) { 175 error_report("could not load kernel '%s'", 176 machine->kernel_filename); 177 exit(1); 178 } 179 /* load initrd */ 180 if (machine->initrd_filename) { 181 initrd_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + 182 KERNEL_GAP); 183 initrd_size = load_image_targphys(machine->initrd_filename, 184 initrd_base, 185 ram_size - initrd_base); 186 if (initrd_size < 0) { 187 error_report("could not load initial ram disk '%s'", 188 machine->initrd_filename); 189 exit(1); 190 } 191 cmdline_base = TARGET_PAGE_ALIGN(initrd_base + initrd_size); 192 } else { 193 initrd_base = 0; 194 initrd_size = 0; 195 cmdline_base = TARGET_PAGE_ALIGN(kernel_base + kernel_size + KERNEL_GAP); 196 } 197 ppc_boot_device = 'm'; 198 } else { 199 kernel_base = 0; 200 kernel_size = 0; 201 initrd_base = 0; 202 initrd_size = 0; 203 ppc_boot_device = '\0'; 204 for (i = 0; boot_device[i] != '\0'; i++) { 205 /* TOFIX: for now, the second IDE channel is not properly 206 * used by OHW. The Mac floppy disk are not emulated. 207 * For now, OHW cannot boot from the network. 208 */ 209 #if 0 210 if (boot_device[i] >= 'a' && boot_device[i] <= 'f') { 211 ppc_boot_device = boot_device[i]; 212 break; 213 } 214 #else 215 if (boot_device[i] >= 'c' && boot_device[i] <= 'd') { 216 ppc_boot_device = boot_device[i]; 217 break; 218 } 219 #endif 220 } 221 if (ppc_boot_device == '\0') { 222 error_report("No valid boot device for G3 Beige machine"); 223 exit(1); 224 } 225 } 226 227 /* Timebase Frequency */ 228 if (kvm_enabled()) { 229 tbfreq = kvmppc_get_tbfreq(); 230 } else { 231 tbfreq = TBFREQ; 232 } 233 234 /* Grackle PCI host bridge */ 235 grackle_dev = qdev_new(TYPE_GRACKLE_PCI_HOST_BRIDGE); 236 qdev_prop_set_uint32(grackle_dev, "ofw-addr", 0x80000000); 237 s = SYS_BUS_DEVICE(grackle_dev); 238 sysbus_realize_and_unref(s, &error_fatal); 239 240 sysbus_mmio_map(s, 0, GRACKLE_BASE); 241 sysbus_mmio_map(s, 1, GRACKLE_BASE + 0x200000); 242 /* PCI hole */ 243 memory_region_add_subregion(get_system_memory(), 0x80000000ULL, 244 sysbus_mmio_get_region(s, 2)); 245 /* Register 2 MB of ISA IO space */ 246 memory_region_add_subregion(get_system_memory(), 0xfe000000, 247 sysbus_mmio_get_region(s, 3)); 248 249 pci_bus = PCI_HOST_BRIDGE(grackle_dev)->bus; 250 251 /* MacIO */ 252 macio = pci_new(PCI_DEVFN(16, 0), TYPE_OLDWORLD_MACIO); 253 dev = DEVICE(macio); 254 qdev_prop_set_uint64(dev, "frequency", tbfreq); 255 256 escc = ESCC(object_resolve_path_component(OBJECT(macio), "escc")); 257 qdev_prop_set_chr(DEVICE(escc), "chrA", serial_hd(0)); 258 qdev_prop_set_chr(DEVICE(escc), "chrB", serial_hd(1)); 259 260 pci_realize_and_unref(macio, pci_bus, &error_fatal); 261 262 pic_dev = DEVICE(object_resolve_path_component(OBJECT(macio), "pic")); 263 for (i = 0; i < 4; i++) { 264 qdev_connect_gpio_out(grackle_dev, i, 265 qdev_get_gpio_in(pic_dev, 0x15 + i)); 266 } 267 268 /* Connect the heathrow PIC outputs to the 6xx bus */ 269 for (i = 0; i < smp_cpus; i++) { 270 switch (PPC_INPUT(env)) { 271 case PPC_FLAGS_INPUT_6xx: 272 /* XXX: we register only 1 output pin for heathrow PIC */ 273 qdev_connect_gpio_out(pic_dev, 0, 274 ((qemu_irq *)env->irq_inputs)[PPC6xx_INPUT_INT]); 275 break; 276 default: 277 error_report("Bus model not supported on OldWorld Mac machine"); 278 exit(1); 279 } 280 } 281 282 pci_vga_init(pci_bus); 283 284 for (i = 0; i < nb_nics; i++) { 285 pci_nic_init_nofail(&nd_table[i], pci_bus, "ne2k_pci", NULL); 286 } 287 288 /* MacIO IDE */ 289 ide_drive_get(hd, ARRAY_SIZE(hd)); 290 macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio), 291 "ide[0]")); 292 macio_ide_init_drives(macio_ide, hd); 293 294 macio_ide = MACIO_IDE(object_resolve_path_component(OBJECT(macio), 295 "ide[1]")); 296 macio_ide_init_drives(macio_ide, &hd[MAX_IDE_DEVS]); 297 298 /* MacIO CUDA/ADB */ 299 dev = DEVICE(object_resolve_path_component(OBJECT(macio), "cuda")); 300 adb_bus = qdev_get_child_bus(dev, "adb.0"); 301 dev = qdev_new(TYPE_ADB_KEYBOARD); 302 qdev_realize_and_unref(dev, adb_bus, &error_fatal); 303 dev = qdev_new(TYPE_ADB_MOUSE); 304 qdev_realize_and_unref(dev, adb_bus, &error_fatal); 305 306 if (machine_usb(machine)) { 307 pci_create_simple(pci_bus, -1, "pci-ohci"); 308 } 309 310 if (graphic_depth != 15 && graphic_depth != 32 && graphic_depth != 8) 311 graphic_depth = 15; 312 313 /* No PCI init: the BIOS will do it */ 314 315 dev = qdev_new(TYPE_FW_CFG_MEM); 316 fw_cfg = FW_CFG(dev); 317 qdev_prop_set_uint32(dev, "data_width", 1); 318 qdev_prop_set_bit(dev, "dma_enabled", false); 319 object_property_add_child(OBJECT(qdev_get_machine()), TYPE_FW_CFG, 320 OBJECT(fw_cfg)); 321 s = SYS_BUS_DEVICE(dev); 322 sysbus_realize_and_unref(s, &error_fatal); 323 sysbus_mmio_map(s, 0, CFG_ADDR); 324 sysbus_mmio_map(s, 1, CFG_ADDR + 2); 325 326 fw_cfg_add_i16(fw_cfg, FW_CFG_NB_CPUS, (uint16_t)smp_cpus); 327 fw_cfg_add_i16(fw_cfg, FW_CFG_MAX_CPUS, (uint16_t)machine->smp.max_cpus); 328 fw_cfg_add_i64(fw_cfg, FW_CFG_RAM_SIZE, (uint64_t)ram_size); 329 fw_cfg_add_i16(fw_cfg, FW_CFG_MACHINE_ID, ARCH_HEATHROW); 330 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_ADDR, kernel_base); 331 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_SIZE, kernel_size); 332 if (machine->kernel_cmdline) { 333 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, cmdline_base); 334 pstrcpy_targphys("cmdline", cmdline_base, TARGET_PAGE_SIZE, 335 machine->kernel_cmdline); 336 } else { 337 fw_cfg_add_i32(fw_cfg, FW_CFG_KERNEL_CMDLINE, 0); 338 } 339 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_ADDR, initrd_base); 340 fw_cfg_add_i32(fw_cfg, FW_CFG_INITRD_SIZE, initrd_size); 341 fw_cfg_add_i16(fw_cfg, FW_CFG_BOOT_DEVICE, ppc_boot_device); 342 343 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_WIDTH, graphic_width); 344 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_HEIGHT, graphic_height); 345 fw_cfg_add_i16(fw_cfg, FW_CFG_PPC_DEPTH, graphic_depth); 346 347 fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_IS_KVM, kvm_enabled()); 348 if (kvm_enabled()) { 349 uint8_t *hypercall; 350 351 hypercall = g_malloc(16); 352 kvmppc_get_hypercall(env, hypercall, 16); 353 fw_cfg_add_bytes(fw_cfg, FW_CFG_PPC_KVM_HC, hypercall, 16); 354 fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_KVM_PID, getpid()); 355 } 356 fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_TBFREQ, tbfreq); 357 /* Mac OS X requires a "known good" clock-frequency value; pass it one. */ 358 fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_CLOCKFREQ, CLOCKFREQ); 359 fw_cfg_add_i32(fw_cfg, FW_CFG_PPC_BUSFREQ, BUSFREQ); 360 361 /* MacOS NDRV VGA driver */ 362 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, NDRV_VGA_FILENAME); 363 if (filename) { 364 gchar *ndrv_file; 365 gsize ndrv_size; 366 367 if (g_file_get_contents(filename, &ndrv_file, &ndrv_size, NULL)) { 368 fw_cfg_add_file(fw_cfg, "ndrv/qemu_vga.ndrv", ndrv_file, ndrv_size); 369 } 370 g_free(filename); 371 } 372 373 qemu_register_boot_set(fw_cfg_boot_set, fw_cfg); 374 } 375 376 /* 377 * Implementation of an interface to adjust firmware path 378 * for the bootindex property handling. 379 */ 380 static char *heathrow_fw_dev_path(FWPathProvider *p, BusState *bus, 381 DeviceState *dev) 382 { 383 PCIDevice *pci; 384 MACIOIDEState *macio_ide; 385 386 if (!strcmp(object_get_typename(OBJECT(dev)), "macio-oldworld")) { 387 pci = PCI_DEVICE(dev); 388 return g_strdup_printf("mac-io@%x", PCI_SLOT(pci->devfn)); 389 } 390 391 if (!strcmp(object_get_typename(OBJECT(dev)), "macio-ide")) { 392 macio_ide = MACIO_IDE(dev); 393 return g_strdup_printf("ata-3@%x", macio_ide->addr); 394 } 395 396 if (!strcmp(object_get_typename(OBJECT(dev)), "ide-hd")) { 397 return g_strdup("disk"); 398 } 399 400 if (!strcmp(object_get_typename(OBJECT(dev)), "ide-cd")) { 401 return g_strdup("cdrom"); 402 } 403 404 if (!strcmp(object_get_typename(OBJECT(dev)), "virtio-blk-device")) { 405 return g_strdup("disk"); 406 } 407 408 return NULL; 409 } 410 411 static int heathrow_kvm_type(MachineState *machine, const char *arg) 412 { 413 /* Always force PR KVM */ 414 return 2; 415 } 416 417 static void heathrow_class_init(ObjectClass *oc, void *data) 418 { 419 MachineClass *mc = MACHINE_CLASS(oc); 420 FWPathProviderClass *fwc = FW_PATH_PROVIDER_CLASS(oc); 421 422 mc->desc = "Heathrow based PowerMAC"; 423 mc->init = ppc_heathrow_init; 424 mc->block_default_type = IF_IDE; 425 /* SMP is not supported currently */ 426 mc->max_cpus = 1; 427 #ifndef TARGET_PPC64 428 mc->is_default = true; 429 #endif 430 /* TOFIX "cad" when Mac floppy is implemented */ 431 mc->default_boot_order = "cd"; 432 mc->kvm_type = heathrow_kvm_type; 433 mc->default_cpu_type = POWERPC_CPU_TYPE_NAME("750_v3.1"); 434 mc->default_display = "std"; 435 mc->ignore_boot_device_suffixes = true; 436 mc->default_ram_id = "ppc_heathrow.ram"; 437 fwc->get_dev_path = heathrow_fw_dev_path; 438 } 439 440 static const TypeInfo ppc_heathrow_machine_info = { 441 .name = MACHINE_TYPE_NAME("g3beige"), 442 .parent = TYPE_MACHINE, 443 .class_init = heathrow_class_init, 444 .interfaces = (InterfaceInfo[]) { 445 { TYPE_FW_PATH_PROVIDER }, 446 { } 447 }, 448 }; 449 450 static void ppc_heathrow_register_types(void) 451 { 452 type_register_static(&ppc_heathrow_machine_info); 453 } 454 455 type_init(ppc_heathrow_register_types); 456