1 /* 2 * QEMU PowerPC e500-based platforms 3 * 4 * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. 5 * 6 * Author: Yu Liu, <yu.liu@freescale.com> 7 * 8 * This file is derived from hw/ppc440_bamboo.c, 9 * the copyright for that material belongs to the original owners. 10 * 11 * This is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "qemu-common.h" 19 #include "qemu/datadir.h" 20 #include "qemu/units.h" 21 #include "qapi/error.h" 22 #include "e500.h" 23 #include "e500-ccsr.h" 24 #include "net/net.h" 25 #include "qemu/config-file.h" 26 #include "hw/char/serial.h" 27 #include "hw/pci/pci.h" 28 #include "hw/boards.h" 29 #include "sysemu/sysemu.h" 30 #include "sysemu/kvm.h" 31 #include "sysemu/reset.h" 32 #include "sysemu/runstate.h" 33 #include "kvm_ppc.h" 34 #include "sysemu/device_tree.h" 35 #include "hw/ppc/openpic.h" 36 #include "hw/ppc/openpic_kvm.h" 37 #include "hw/ppc/ppc.h" 38 #include "hw/qdev-properties.h" 39 #include "hw/loader.h" 40 #include "elf.h" 41 #include "hw/sysbus.h" 42 #include "exec/address-spaces.h" 43 #include "qemu/host-utils.h" 44 #include "qemu/option.h" 45 #include "hw/pci-host/ppce500.h" 46 #include "qemu/error-report.h" 47 #include "hw/platform-bus.h" 48 #include "hw/net/fsl_etsec/etsec.h" 49 #include "hw/i2c/i2c.h" 50 #include "hw/irq.h" 51 52 #define EPAPR_MAGIC (0x45504150) 53 #define BINARY_DEVICE_TREE_FILE "mpc8544ds.dtb" 54 #define DTC_LOAD_PAD 0x1800000 55 #define DTC_PAD_MASK 0xFFFFF 56 #define DTB_MAX_SIZE (8 * MiB) 57 #define INITRD_LOAD_PAD 0x2000000 58 #define INITRD_PAD_MASK 0xFFFFFF 59 60 #define RAM_SIZES_ALIGN (64 * MiB) 61 62 /* TODO: parameterize */ 63 #define MPC8544_CCSRBAR_SIZE 0x00100000ULL 64 #define MPC8544_MPIC_REGS_OFFSET 0x40000ULL 65 #define MPC8544_MSI_REGS_OFFSET 0x41600ULL 66 #define MPC8544_SERIAL0_REGS_OFFSET 0x4500ULL 67 #define MPC8544_SERIAL1_REGS_OFFSET 0x4600ULL 68 #define MPC8544_PCI_REGS_OFFSET 0x8000ULL 69 #define MPC8544_PCI_REGS_SIZE 0x1000ULL 70 #define MPC8544_UTIL_OFFSET 0xe0000ULL 71 #define MPC8XXX_GPIO_OFFSET 0x000FF000ULL 72 #define MPC8544_I2C_REGS_OFFSET 0x3000ULL 73 #define MPC8XXX_GPIO_IRQ 47 74 #define MPC8544_I2C_IRQ 43 75 #define RTC_REGS_OFFSET 0x68 76 77 struct boot_info 78 { 79 uint32_t dt_base; 80 uint32_t dt_size; 81 uint32_t entry; 82 }; 83 84 static uint32_t *pci_map_create(void *fdt, uint32_t mpic, int first_slot, 85 int nr_slots, int *len) 86 { 87 int i = 0; 88 int slot; 89 int pci_irq; 90 int host_irq; 91 int last_slot = first_slot + nr_slots; 92 uint32_t *pci_map; 93 94 *len = nr_slots * 4 * 7 * sizeof(uint32_t); 95 pci_map = g_malloc(*len); 96 97 for (slot = first_slot; slot < last_slot; slot++) { 98 for (pci_irq = 0; pci_irq < 4; pci_irq++) { 99 pci_map[i++] = cpu_to_be32(slot << 11); 100 pci_map[i++] = cpu_to_be32(0x0); 101 pci_map[i++] = cpu_to_be32(0x0); 102 pci_map[i++] = cpu_to_be32(pci_irq + 1); 103 pci_map[i++] = cpu_to_be32(mpic); 104 host_irq = ppce500_pci_map_irq_slot(slot, pci_irq); 105 pci_map[i++] = cpu_to_be32(host_irq + 1); 106 pci_map[i++] = cpu_to_be32(0x1); 107 } 108 } 109 110 assert((i * sizeof(uint32_t)) == *len); 111 112 return pci_map; 113 } 114 115 static void dt_serial_create(void *fdt, unsigned long long offset, 116 const char *soc, const char *mpic, 117 const char *alias, int idx, bool defcon) 118 { 119 char *ser; 120 121 ser = g_strdup_printf("%s/serial@%llx", soc, offset); 122 qemu_fdt_add_subnode(fdt, ser); 123 qemu_fdt_setprop_string(fdt, ser, "device_type", "serial"); 124 qemu_fdt_setprop_string(fdt, ser, "compatible", "ns16550"); 125 qemu_fdt_setprop_cells(fdt, ser, "reg", offset, 0x100); 126 qemu_fdt_setprop_cell(fdt, ser, "cell-index", idx); 127 qemu_fdt_setprop_cell(fdt, ser, "clock-frequency", 0); 128 qemu_fdt_setprop_cells(fdt, ser, "interrupts", 42, 2); 129 qemu_fdt_setprop_phandle(fdt, ser, "interrupt-parent", mpic); 130 qemu_fdt_setprop_string(fdt, "/aliases", alias, ser); 131 132 if (defcon) { 133 /* 134 * "linux,stdout-path" and "stdout" properties are deprecated by linux 135 * kernel. New platforms should only use the "stdout-path" property. Set 136 * the new property and continue using older property to remain 137 * compatible with the existing firmware. 138 */ 139 qemu_fdt_setprop_string(fdt, "/chosen", "linux,stdout-path", ser); 140 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", ser); 141 } 142 g_free(ser); 143 } 144 145 static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char *mpic) 146 { 147 hwaddr mmio0 = MPC8XXX_GPIO_OFFSET; 148 int irq0 = MPC8XXX_GPIO_IRQ; 149 gchar *node = g_strdup_printf("%s/gpio@%"PRIx64, soc, mmio0); 150 gchar *poweroff = g_strdup_printf("%s/power-off", soc); 151 int gpio_ph; 152 153 qemu_fdt_add_subnode(fdt, node); 154 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio"); 155 qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000); 156 qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2); 157 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 158 qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2); 159 qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0); 160 gpio_ph = qemu_fdt_alloc_phandle(fdt); 161 qemu_fdt_setprop_cell(fdt, node, "phandle", gpio_ph); 162 qemu_fdt_setprop_cell(fdt, node, "linux,phandle", gpio_ph); 163 164 /* Power Off Pin */ 165 qemu_fdt_add_subnode(fdt, poweroff); 166 qemu_fdt_setprop_string(fdt, poweroff, "compatible", "gpio-poweroff"); 167 qemu_fdt_setprop_cells(fdt, poweroff, "gpios", gpio_ph, 0, 0); 168 169 g_free(node); 170 g_free(poweroff); 171 } 172 173 static void dt_rtc_create(void *fdt, const char *i2c, const char *alias) 174 { 175 int offset = RTC_REGS_OFFSET; 176 177 gchar *rtc = g_strdup_printf("%s/rtc@%"PRIx32, i2c, offset); 178 qemu_fdt_add_subnode(fdt, rtc); 179 qemu_fdt_setprop_string(fdt, rtc, "compatible", "pericom,pt7c4338"); 180 qemu_fdt_setprop_cells(fdt, rtc, "reg", offset); 181 qemu_fdt_setprop_string(fdt, "/aliases", alias, rtc); 182 183 g_free(rtc); 184 } 185 186 static void dt_i2c_create(void *fdt, const char *soc, const char *mpic, 187 const char *alias) 188 { 189 hwaddr mmio0 = MPC8544_I2C_REGS_OFFSET; 190 int irq0 = MPC8544_I2C_IRQ; 191 192 gchar *i2c = g_strdup_printf("%s/i2c@%"PRIx64, soc, mmio0); 193 qemu_fdt_add_subnode(fdt, i2c); 194 qemu_fdt_setprop_string(fdt, i2c, "device_type", "i2c"); 195 qemu_fdt_setprop_string(fdt, i2c, "compatible", "fsl-i2c"); 196 qemu_fdt_setprop_cells(fdt, i2c, "reg", mmio0, 0x14); 197 qemu_fdt_setprop_cells(fdt, i2c, "cell-index", 0); 198 qemu_fdt_setprop_cells(fdt, i2c, "interrupts", irq0, 0x2); 199 qemu_fdt_setprop_phandle(fdt, i2c, "interrupt-parent", mpic); 200 qemu_fdt_setprop_string(fdt, "/aliases", alias, i2c); 201 202 g_free(i2c); 203 } 204 205 206 typedef struct PlatformDevtreeData { 207 void *fdt; 208 const char *mpic; 209 int irq_start; 210 const char *node; 211 PlatformBusDevice *pbus; 212 } PlatformDevtreeData; 213 214 static int create_devtree_etsec(SysBusDevice *sbdev, PlatformDevtreeData *data) 215 { 216 eTSEC *etsec = ETSEC_COMMON(sbdev); 217 PlatformBusDevice *pbus = data->pbus; 218 hwaddr mmio0 = platform_bus_get_mmio_addr(pbus, sbdev, 0); 219 int irq0 = platform_bus_get_irqn(pbus, sbdev, 0); 220 int irq1 = platform_bus_get_irqn(pbus, sbdev, 1); 221 int irq2 = platform_bus_get_irqn(pbus, sbdev, 2); 222 gchar *node = g_strdup_printf("/platform/ethernet@%"PRIx64, mmio0); 223 gchar *group = g_strdup_printf("%s/queue-group", node); 224 void *fdt = data->fdt; 225 226 assert((int64_t)mmio0 >= 0); 227 assert(irq0 >= 0); 228 assert(irq1 >= 0); 229 assert(irq2 >= 0); 230 231 qemu_fdt_add_subnode(fdt, node); 232 qemu_fdt_setprop_string(fdt, node, "device_type", "network"); 233 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,etsec2"); 234 qemu_fdt_setprop_string(fdt, node, "model", "eTSEC"); 235 qemu_fdt_setprop(fdt, node, "local-mac-address", etsec->conf.macaddr.a, 6); 236 qemu_fdt_setprop_cells(fdt, node, "fixed-link", 0, 1, 1000, 0, 0); 237 238 qemu_fdt_add_subnode(fdt, group); 239 qemu_fdt_setprop_cells(fdt, group, "reg", mmio0, 0x1000); 240 qemu_fdt_setprop_cells(fdt, group, "interrupts", 241 data->irq_start + irq0, 0x2, 242 data->irq_start + irq1, 0x2, 243 data->irq_start + irq2, 0x2); 244 245 g_free(node); 246 g_free(group); 247 248 return 0; 249 } 250 251 static void sysbus_device_create_devtree(SysBusDevice *sbdev, void *opaque) 252 { 253 PlatformDevtreeData *data = opaque; 254 bool matched = false; 255 256 if (object_dynamic_cast(OBJECT(sbdev), TYPE_ETSEC_COMMON)) { 257 create_devtree_etsec(sbdev, data); 258 matched = true; 259 } 260 261 if (!matched) { 262 error_report("Device %s is not supported by this machine yet.", 263 qdev_fw_name(DEVICE(sbdev))); 264 exit(1); 265 } 266 } 267 268 static void platform_bus_create_devtree(PPCE500MachineState *pms, 269 void *fdt, const char *mpic) 270 { 271 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 272 gchar *node = g_strdup_printf("/platform@%"PRIx64, pmc->platform_bus_base); 273 const char platcomp[] = "qemu,platform\0simple-bus"; 274 uint64_t addr = pmc->platform_bus_base; 275 uint64_t size = pmc->platform_bus_size; 276 int irq_start = pmc->platform_bus_first_irq; 277 278 /* Create a /platform node that we can put all devices into */ 279 280 qemu_fdt_add_subnode(fdt, node); 281 qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp)); 282 283 /* Our platform bus region is less than 32bit big, so 1 cell is enough for 284 address and size */ 285 qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); 286 qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); 287 qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size); 288 289 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 290 291 /* Create dt nodes for dynamic devices */ 292 PlatformDevtreeData data = { 293 .fdt = fdt, 294 .mpic = mpic, 295 .irq_start = irq_start, 296 .node = node, 297 .pbus = pms->pbus_dev, 298 }; 299 300 /* Loop through all dynamic sysbus devices and create nodes for them */ 301 foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data); 302 303 g_free(node); 304 } 305 306 static int ppce500_load_device_tree(PPCE500MachineState *pms, 307 hwaddr addr, 308 hwaddr initrd_base, 309 hwaddr initrd_size, 310 hwaddr kernel_base, 311 hwaddr kernel_size, 312 bool dry_run) 313 { 314 MachineState *machine = MACHINE(pms); 315 unsigned int smp_cpus = machine->smp.cpus; 316 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 317 CPUPPCState *env = first_cpu->env_ptr; 318 int ret = -1; 319 uint64_t mem_reg_property[] = { 0, cpu_to_be64(machine->ram_size) }; 320 int fdt_size; 321 void *fdt; 322 uint8_t hypercall[16]; 323 uint32_t clock_freq = 400000000; 324 uint32_t tb_freq = 400000000; 325 int i; 326 char compatible_sb[] = "fsl,mpc8544-immr\0simple-bus"; 327 char *soc; 328 char *mpic; 329 uint32_t mpic_ph; 330 uint32_t msi_ph; 331 char *gutil; 332 char *pci; 333 char *msi; 334 uint32_t *pci_map = NULL; 335 int len; 336 uint32_t pci_ranges[14] = 337 { 338 0x2000000, 0x0, pmc->pci_mmio_bus_base, 339 pmc->pci_mmio_base >> 32, pmc->pci_mmio_base, 340 0x0, 0x20000000, 341 342 0x1000000, 0x0, 0x0, 343 pmc->pci_pio_base >> 32, pmc->pci_pio_base, 344 0x0, 0x10000, 345 }; 346 QemuOpts *machine_opts = qemu_get_machine_opts(); 347 const char *dtb_file = qemu_opt_get(machine_opts, "dtb"); 348 const char *toplevel_compat = qemu_opt_get(machine_opts, "dt_compatible"); 349 350 if (dtb_file) { 351 char *filename; 352 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_file); 353 if (!filename) { 354 goto out; 355 } 356 357 fdt = load_device_tree(filename, &fdt_size); 358 g_free(filename); 359 if (!fdt) { 360 goto out; 361 } 362 goto done; 363 } 364 365 fdt = create_device_tree(&fdt_size); 366 if (fdt == NULL) { 367 goto out; 368 } 369 370 /* Manipulate device tree in memory. */ 371 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 2); 372 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 2); 373 374 qemu_fdt_add_subnode(fdt, "/memory"); 375 qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); 376 qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, 377 sizeof(mem_reg_property)); 378 379 qemu_fdt_add_subnode(fdt, "/chosen"); 380 if (initrd_size) { 381 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 382 initrd_base); 383 if (ret < 0) { 384 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 385 } 386 387 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 388 (initrd_base + initrd_size)); 389 if (ret < 0) { 390 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 391 } 392 393 } 394 395 if (kernel_base != -1ULL) { 396 qemu_fdt_setprop_cells(fdt, "/chosen", "qemu,boot-kernel", 397 kernel_base >> 32, kernel_base, 398 kernel_size >> 32, kernel_size); 399 } 400 401 ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 402 machine->kernel_cmdline); 403 if (ret < 0) 404 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 405 406 if (kvm_enabled()) { 407 /* Read out host's frequencies */ 408 clock_freq = kvmppc_get_clockfreq(); 409 tb_freq = kvmppc_get_tbfreq(); 410 411 /* indicate KVM hypercall interface */ 412 qemu_fdt_add_subnode(fdt, "/hypervisor"); 413 qemu_fdt_setprop_string(fdt, "/hypervisor", "compatible", 414 "linux,kvm"); 415 kvmppc_get_hypercall(env, hypercall, sizeof(hypercall)); 416 qemu_fdt_setprop(fdt, "/hypervisor", "hcall-instructions", 417 hypercall, sizeof(hypercall)); 418 /* if KVM supports the idle hcall, set property indicating this */ 419 if (kvmppc_get_hasidle(env)) { 420 qemu_fdt_setprop(fdt, "/hypervisor", "has-idle", NULL, 0); 421 } 422 } 423 424 /* Create CPU nodes */ 425 qemu_fdt_add_subnode(fdt, "/cpus"); 426 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 1); 427 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0); 428 429 /* We need to generate the cpu nodes in reverse order, so Linux can pick 430 the first node as boot node and be happy */ 431 for (i = smp_cpus - 1; i >= 0; i--) { 432 CPUState *cpu; 433 char *cpu_name; 434 uint64_t cpu_release_addr = pmc->spin_base + (i * 0x20); 435 436 cpu = qemu_get_cpu(i); 437 if (cpu == NULL) { 438 continue; 439 } 440 env = cpu->env_ptr; 441 442 cpu_name = g_strdup_printf("/cpus/PowerPC,8544@%x", i); 443 qemu_fdt_add_subnode(fdt, cpu_name); 444 qemu_fdt_setprop_cell(fdt, cpu_name, "clock-frequency", clock_freq); 445 qemu_fdt_setprop_cell(fdt, cpu_name, "timebase-frequency", tb_freq); 446 qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu"); 447 qemu_fdt_setprop_cell(fdt, cpu_name, "reg", i); 448 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-line-size", 449 env->dcache_line_size); 450 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-line-size", 451 env->icache_line_size); 452 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-size", 0x8000); 453 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-size", 0x8000); 454 qemu_fdt_setprop_cell(fdt, cpu_name, "bus-frequency", 0); 455 if (cpu->cpu_index) { 456 qemu_fdt_setprop_string(fdt, cpu_name, "status", "disabled"); 457 qemu_fdt_setprop_string(fdt, cpu_name, "enable-method", 458 "spin-table"); 459 qemu_fdt_setprop_u64(fdt, cpu_name, "cpu-release-addr", 460 cpu_release_addr); 461 } else { 462 qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay"); 463 } 464 g_free(cpu_name); 465 } 466 467 qemu_fdt_add_subnode(fdt, "/aliases"); 468 /* XXX These should go into their respective devices' code */ 469 soc = g_strdup_printf("/soc@%"PRIx64, pmc->ccsrbar_base); 470 qemu_fdt_add_subnode(fdt, soc); 471 qemu_fdt_setprop_string(fdt, soc, "device_type", "soc"); 472 qemu_fdt_setprop(fdt, soc, "compatible", compatible_sb, 473 sizeof(compatible_sb)); 474 qemu_fdt_setprop_cell(fdt, soc, "#address-cells", 1); 475 qemu_fdt_setprop_cell(fdt, soc, "#size-cells", 1); 476 qemu_fdt_setprop_cells(fdt, soc, "ranges", 0x0, 477 pmc->ccsrbar_base >> 32, pmc->ccsrbar_base, 478 MPC8544_CCSRBAR_SIZE); 479 /* XXX should contain a reasonable value */ 480 qemu_fdt_setprop_cell(fdt, soc, "bus-frequency", 0); 481 482 mpic = g_strdup_printf("%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET); 483 qemu_fdt_add_subnode(fdt, mpic); 484 qemu_fdt_setprop_string(fdt, mpic, "device_type", "open-pic"); 485 qemu_fdt_setprop_string(fdt, mpic, "compatible", "fsl,mpic"); 486 qemu_fdt_setprop_cells(fdt, mpic, "reg", MPC8544_MPIC_REGS_OFFSET, 487 0x40000); 488 qemu_fdt_setprop_cell(fdt, mpic, "#address-cells", 0); 489 qemu_fdt_setprop_cell(fdt, mpic, "#interrupt-cells", 2); 490 mpic_ph = qemu_fdt_alloc_phandle(fdt); 491 qemu_fdt_setprop_cell(fdt, mpic, "phandle", mpic_ph); 492 qemu_fdt_setprop_cell(fdt, mpic, "linux,phandle", mpic_ph); 493 qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0); 494 495 /* 496 * We have to generate ser1 first, because Linux takes the first 497 * device it finds in the dt as serial output device. And we generate 498 * devices in reverse order to the dt. 499 */ 500 if (serial_hd(1)) { 501 dt_serial_create(fdt, MPC8544_SERIAL1_REGS_OFFSET, 502 soc, mpic, "serial1", 1, false); 503 } 504 505 if (serial_hd(0)) { 506 dt_serial_create(fdt, MPC8544_SERIAL0_REGS_OFFSET, 507 soc, mpic, "serial0", 0, true); 508 } 509 510 /* i2c */ 511 dt_i2c_create(fdt, soc, mpic, "i2c"); 512 513 dt_rtc_create(fdt, "i2c", "rtc"); 514 515 516 gutil = g_strdup_printf("%s/global-utilities@%llx", soc, 517 MPC8544_UTIL_OFFSET); 518 qemu_fdt_add_subnode(fdt, gutil); 519 qemu_fdt_setprop_string(fdt, gutil, "compatible", "fsl,mpc8544-guts"); 520 qemu_fdt_setprop_cells(fdt, gutil, "reg", MPC8544_UTIL_OFFSET, 0x1000); 521 qemu_fdt_setprop(fdt, gutil, "fsl,has-rstcr", NULL, 0); 522 g_free(gutil); 523 524 msi = g_strdup_printf("/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET); 525 qemu_fdt_add_subnode(fdt, msi); 526 qemu_fdt_setprop_string(fdt, msi, "compatible", "fsl,mpic-msi"); 527 qemu_fdt_setprop_cells(fdt, msi, "reg", MPC8544_MSI_REGS_OFFSET, 0x200); 528 msi_ph = qemu_fdt_alloc_phandle(fdt); 529 qemu_fdt_setprop_cells(fdt, msi, "msi-available-ranges", 0x0, 0x100); 530 qemu_fdt_setprop_phandle(fdt, msi, "interrupt-parent", mpic); 531 qemu_fdt_setprop_cells(fdt, msi, "interrupts", 532 0xe0, 0x0, 533 0xe1, 0x0, 534 0xe2, 0x0, 535 0xe3, 0x0, 536 0xe4, 0x0, 537 0xe5, 0x0, 538 0xe6, 0x0, 539 0xe7, 0x0); 540 qemu_fdt_setprop_cell(fdt, msi, "phandle", msi_ph); 541 qemu_fdt_setprop_cell(fdt, msi, "linux,phandle", msi_ph); 542 g_free(msi); 543 544 pci = g_strdup_printf("/pci@%llx", 545 pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET); 546 qemu_fdt_add_subnode(fdt, pci); 547 qemu_fdt_setprop_cell(fdt, pci, "cell-index", 0); 548 qemu_fdt_setprop_string(fdt, pci, "compatible", "fsl,mpc8540-pci"); 549 qemu_fdt_setprop_string(fdt, pci, "device_type", "pci"); 550 qemu_fdt_setprop_cells(fdt, pci, "interrupt-map-mask", 0xf800, 0x0, 551 0x0, 0x7); 552 pci_map = pci_map_create(fdt, qemu_fdt_get_phandle(fdt, mpic), 553 pmc->pci_first_slot, pmc->pci_nr_slots, 554 &len); 555 qemu_fdt_setprop(fdt, pci, "interrupt-map", pci_map, len); 556 qemu_fdt_setprop_phandle(fdt, pci, "interrupt-parent", mpic); 557 qemu_fdt_setprop_cells(fdt, pci, "interrupts", 24, 2); 558 qemu_fdt_setprop_cells(fdt, pci, "bus-range", 0, 255); 559 for (i = 0; i < 14; i++) { 560 pci_ranges[i] = cpu_to_be32(pci_ranges[i]); 561 } 562 qemu_fdt_setprop_cell(fdt, pci, "fsl,msi", msi_ph); 563 qemu_fdt_setprop(fdt, pci, "ranges", pci_ranges, sizeof(pci_ranges)); 564 qemu_fdt_setprop_cells(fdt, pci, "reg", 565 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET) >> 32, 566 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET), 567 0, 0x1000); 568 qemu_fdt_setprop_cell(fdt, pci, "clock-frequency", 66666666); 569 qemu_fdt_setprop_cell(fdt, pci, "#interrupt-cells", 1); 570 qemu_fdt_setprop_cell(fdt, pci, "#size-cells", 2); 571 qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3); 572 qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci); 573 g_free(pci); 574 575 if (pmc->has_mpc8xxx_gpio) { 576 create_dt_mpc8xxx_gpio(fdt, soc, mpic); 577 } 578 g_free(soc); 579 580 if (pms->pbus_dev) { 581 platform_bus_create_devtree(pms, fdt, mpic); 582 } 583 g_free(mpic); 584 585 pmc->fixup_devtree(fdt); 586 587 if (toplevel_compat) { 588 qemu_fdt_setprop(fdt, "/", "compatible", toplevel_compat, 589 strlen(toplevel_compat) + 1); 590 } 591 592 done: 593 if (!dry_run) { 594 qemu_fdt_dumpdtb(fdt, fdt_size); 595 cpu_physical_memory_write(addr, fdt, fdt_size); 596 } 597 ret = fdt_size; 598 g_free(fdt); 599 600 out: 601 g_free(pci_map); 602 603 return ret; 604 } 605 606 typedef struct DeviceTreeParams { 607 PPCE500MachineState *machine; 608 hwaddr addr; 609 hwaddr initrd_base; 610 hwaddr initrd_size; 611 hwaddr kernel_base; 612 hwaddr kernel_size; 613 Notifier notifier; 614 } DeviceTreeParams; 615 616 static void ppce500_reset_device_tree(void *opaque) 617 { 618 DeviceTreeParams *p = opaque; 619 ppce500_load_device_tree(p->machine, p->addr, p->initrd_base, 620 p->initrd_size, p->kernel_base, p->kernel_size, 621 false); 622 } 623 624 static void ppce500_init_notify(Notifier *notifier, void *data) 625 { 626 DeviceTreeParams *p = container_of(notifier, DeviceTreeParams, notifier); 627 ppce500_reset_device_tree(p); 628 } 629 630 static int ppce500_prep_device_tree(PPCE500MachineState *machine, 631 hwaddr addr, 632 hwaddr initrd_base, 633 hwaddr initrd_size, 634 hwaddr kernel_base, 635 hwaddr kernel_size) 636 { 637 DeviceTreeParams *p = g_new(DeviceTreeParams, 1); 638 p->machine = machine; 639 p->addr = addr; 640 p->initrd_base = initrd_base; 641 p->initrd_size = initrd_size; 642 p->kernel_base = kernel_base; 643 p->kernel_size = kernel_size; 644 645 qemu_register_reset(ppce500_reset_device_tree, p); 646 p->notifier.notify = ppce500_init_notify; 647 qemu_add_machine_init_done_notifier(&p->notifier); 648 649 /* Issue the device tree loader once, so that we get the size of the blob */ 650 return ppce500_load_device_tree(machine, addr, initrd_base, initrd_size, 651 kernel_base, kernel_size, true); 652 } 653 654 /* Create -kernel TLB entries for BookE. */ 655 hwaddr booke206_page_size_to_tlb(uint64_t size) 656 { 657 return 63 - clz64(size / KiB); 658 } 659 660 static int booke206_initial_map_tsize(CPUPPCState *env) 661 { 662 struct boot_info *bi = env->load_info; 663 hwaddr dt_end; 664 int ps; 665 666 /* Our initial TLB entry needs to cover everything from 0 to 667 the device tree top */ 668 dt_end = bi->dt_base + bi->dt_size; 669 ps = booke206_page_size_to_tlb(dt_end) + 1; 670 if (ps & 1) { 671 /* e500v2 can only do even TLB size bits */ 672 ps++; 673 } 674 return ps; 675 } 676 677 static uint64_t mmubooke_initial_mapsize(CPUPPCState *env) 678 { 679 int tsize; 680 681 tsize = booke206_initial_map_tsize(env); 682 return (1ULL << 10 << tsize); 683 } 684 685 static void mmubooke_create_initial_mapping(CPUPPCState *env) 686 { 687 ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 0); 688 hwaddr size; 689 int ps; 690 691 ps = booke206_initial_map_tsize(env); 692 size = (ps << MAS1_TSIZE_SHIFT); 693 tlb->mas1 = MAS1_VALID | size; 694 tlb->mas2 = 0; 695 tlb->mas7_3 = 0; 696 tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; 697 698 env->tlb_dirty = true; 699 } 700 701 static void ppce500_cpu_reset_sec(void *opaque) 702 { 703 PowerPCCPU *cpu = opaque; 704 CPUState *cs = CPU(cpu); 705 706 cpu_reset(cs); 707 708 cs->exception_index = EXCP_HLT; 709 } 710 711 static void ppce500_cpu_reset(void *opaque) 712 { 713 PowerPCCPU *cpu = opaque; 714 CPUState *cs = CPU(cpu); 715 CPUPPCState *env = &cpu->env; 716 struct boot_info *bi = env->load_info; 717 718 cpu_reset(cs); 719 720 /* Set initial guest state. */ 721 cs->halted = 0; 722 env->gpr[1] = (16 * MiB) - 8; 723 env->gpr[3] = bi->dt_base; 724 env->gpr[4] = 0; 725 env->gpr[5] = 0; 726 env->gpr[6] = EPAPR_MAGIC; 727 env->gpr[7] = mmubooke_initial_mapsize(env); 728 env->gpr[8] = 0; 729 env->gpr[9] = 0; 730 env->nip = bi->entry; 731 mmubooke_create_initial_mapping(env); 732 } 733 734 static DeviceState *ppce500_init_mpic_qemu(PPCE500MachineState *pms, 735 IrqLines *irqs) 736 { 737 DeviceState *dev; 738 SysBusDevice *s; 739 int i, j, k; 740 MachineState *machine = MACHINE(pms); 741 unsigned int smp_cpus = machine->smp.cpus; 742 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 743 744 dev = qdev_new(TYPE_OPENPIC); 745 object_property_add_child(OBJECT(machine), "pic", OBJECT(dev)); 746 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 747 qdev_prop_set_uint32(dev, "nb_cpus", smp_cpus); 748 749 s = SYS_BUS_DEVICE(dev); 750 sysbus_realize_and_unref(s, &error_fatal); 751 752 k = 0; 753 for (i = 0; i < smp_cpus; i++) { 754 for (j = 0; j < OPENPIC_OUTPUT_NB; j++) { 755 sysbus_connect_irq(s, k++, irqs[i].irq[j]); 756 } 757 } 758 759 return dev; 760 } 761 762 static DeviceState *ppce500_init_mpic_kvm(const PPCE500MachineClass *pmc, 763 IrqLines *irqs, Error **errp) 764 { 765 DeviceState *dev; 766 CPUState *cs; 767 768 dev = qdev_new(TYPE_KVM_OPENPIC); 769 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 770 771 if (!sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), errp)) { 772 object_unparent(OBJECT(dev)); 773 return NULL; 774 } 775 776 CPU_FOREACH(cs) { 777 if (kvm_openpic_connect_vcpu(dev, cs)) { 778 fprintf(stderr, "%s: failed to connect vcpu to irqchip\n", 779 __func__); 780 abort(); 781 } 782 } 783 784 return dev; 785 } 786 787 static DeviceState *ppce500_init_mpic(PPCE500MachineState *pms, 788 MemoryRegion *ccsr, 789 IrqLines *irqs) 790 { 791 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 792 DeviceState *dev = NULL; 793 SysBusDevice *s; 794 795 if (kvm_enabled()) { 796 Error *err = NULL; 797 798 if (kvm_kernel_irqchip_allowed()) { 799 dev = ppce500_init_mpic_kvm(pmc, irqs, &err); 800 } 801 if (kvm_kernel_irqchip_required() && !dev) { 802 error_reportf_err(err, 803 "kernel_irqchip requested but unavailable: "); 804 exit(1); 805 } 806 } 807 808 if (!dev) { 809 dev = ppce500_init_mpic_qemu(pms, irqs); 810 } 811 812 s = SYS_BUS_DEVICE(dev); 813 memory_region_add_subregion(ccsr, MPC8544_MPIC_REGS_OFFSET, 814 s->mmio[0].memory); 815 816 return dev; 817 } 818 819 static void ppce500_power_off(void *opaque, int line, int on) 820 { 821 if (on) { 822 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 823 } 824 } 825 826 void ppce500_init(MachineState *machine) 827 { 828 MemoryRegion *address_space_mem = get_system_memory(); 829 PPCE500MachineState *pms = PPCE500_MACHINE(machine); 830 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(machine); 831 PCIBus *pci_bus; 832 CPUPPCState *env = NULL; 833 uint64_t loadaddr; 834 hwaddr kernel_base = -1LL; 835 int kernel_size = 0; 836 hwaddr dt_base = 0; 837 hwaddr initrd_base = 0; 838 int initrd_size = 0; 839 hwaddr cur_base = 0; 840 char *filename; 841 const char *payload_name; 842 bool kernel_as_payload; 843 hwaddr bios_entry = 0; 844 target_long payload_size; 845 struct boot_info *boot_info; 846 int dt_size; 847 int i; 848 unsigned int smp_cpus = machine->smp.cpus; 849 /* irq num for pin INTA, INTB, INTC and INTD is 1, 2, 3 and 850 * 4 respectively */ 851 unsigned int pci_irq_nrs[PCI_NUM_PINS] = {1, 2, 3, 4}; 852 IrqLines *irqs; 853 DeviceState *dev, *mpicdev; 854 CPUPPCState *firstenv = NULL; 855 MemoryRegion *ccsr_addr_space; 856 SysBusDevice *s; 857 PPCE500CCSRState *ccsr; 858 I2CBus *i2c; 859 860 irqs = g_new0(IrqLines, smp_cpus); 861 for (i = 0; i < smp_cpus; i++) { 862 PowerPCCPU *cpu; 863 CPUState *cs; 864 qemu_irq *input; 865 866 cpu = POWERPC_CPU(object_new(machine->cpu_type)); 867 env = &cpu->env; 868 cs = CPU(cpu); 869 870 if (env->mmu_model != POWERPC_MMU_BOOKE206) { 871 error_report("MMU model %i not supported by this machine", 872 env->mmu_model); 873 exit(1); 874 } 875 876 /* 877 * Secondary CPU starts in halted state for now. Needs to change 878 * when implementing non-kernel boot. 879 */ 880 object_property_set_bool(OBJECT(cs), "start-powered-off", i != 0, 881 &error_fatal); 882 qdev_realize_and_unref(DEVICE(cs), NULL, &error_fatal); 883 884 if (!firstenv) { 885 firstenv = env; 886 } 887 888 input = (qemu_irq *)env->irq_inputs; 889 irqs[i].irq[OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT]; 890 irqs[i].irq[OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT]; 891 env->spr_cb[SPR_BOOKE_PIR].default_value = cs->cpu_index = i; 892 env->mpic_iack = pmc->ccsrbar_base + MPC8544_MPIC_REGS_OFFSET + 0xa0; 893 894 ppc_booke_timers_init(cpu, 400000000, PPC_TIMER_E500); 895 896 /* Register reset handler */ 897 if (!i) { 898 /* Primary CPU */ 899 struct boot_info *boot_info; 900 boot_info = g_malloc0(sizeof(struct boot_info)); 901 qemu_register_reset(ppce500_cpu_reset, cpu); 902 env->load_info = boot_info; 903 } else { 904 /* Secondary CPUs */ 905 qemu_register_reset(ppce500_cpu_reset_sec, cpu); 906 } 907 } 908 909 env = firstenv; 910 911 if (!QEMU_IS_ALIGNED(machine->ram_size, RAM_SIZES_ALIGN)) { 912 error_report("RAM size must be multiple of %" PRIu64, RAM_SIZES_ALIGN); 913 exit(EXIT_FAILURE); 914 } 915 916 /* Register Memory */ 917 memory_region_add_subregion(address_space_mem, 0, machine->ram); 918 919 dev = qdev_new("e500-ccsr"); 920 object_property_add_child(qdev_get_machine(), "e500-ccsr", 921 OBJECT(dev)); 922 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 923 ccsr = CCSR(dev); 924 ccsr_addr_space = &ccsr->ccsr_space; 925 memory_region_add_subregion(address_space_mem, pmc->ccsrbar_base, 926 ccsr_addr_space); 927 928 mpicdev = ppce500_init_mpic(pms, ccsr_addr_space, irqs); 929 930 /* Serial */ 931 if (serial_hd(0)) { 932 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL0_REGS_OFFSET, 933 0, qdev_get_gpio_in(mpicdev, 42), 399193, 934 serial_hd(0), DEVICE_BIG_ENDIAN); 935 } 936 937 if (serial_hd(1)) { 938 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL1_REGS_OFFSET, 939 0, qdev_get_gpio_in(mpicdev, 42), 399193, 940 serial_hd(1), DEVICE_BIG_ENDIAN); 941 } 942 /* I2C */ 943 dev = qdev_new("mpc-i2c"); 944 s = SYS_BUS_DEVICE(dev); 945 sysbus_realize_and_unref(s, &error_fatal); 946 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8544_I2C_IRQ)); 947 memory_region_add_subregion(ccsr_addr_space, MPC8544_I2C_REGS_OFFSET, 948 sysbus_mmio_get_region(s, 0)); 949 i2c = (I2CBus *)qdev_get_child_bus(dev, "i2c"); 950 i2c_slave_create_simple(i2c, "ds1338", RTC_REGS_OFFSET); 951 952 953 /* General Utility device */ 954 dev = qdev_new("mpc8544-guts"); 955 s = SYS_BUS_DEVICE(dev); 956 sysbus_realize_and_unref(s, &error_fatal); 957 memory_region_add_subregion(ccsr_addr_space, MPC8544_UTIL_OFFSET, 958 sysbus_mmio_get_region(s, 0)); 959 960 /* PCI */ 961 dev = qdev_new("e500-pcihost"); 962 object_property_add_child(qdev_get_machine(), "pci-host", OBJECT(dev)); 963 qdev_prop_set_uint32(dev, "first_slot", pmc->pci_first_slot); 964 qdev_prop_set_uint32(dev, "first_pin_irq", pci_irq_nrs[0]); 965 s = SYS_BUS_DEVICE(dev); 966 sysbus_realize_and_unref(s, &error_fatal); 967 for (i = 0; i < PCI_NUM_PINS; i++) { 968 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, pci_irq_nrs[i])); 969 } 970 971 memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET, 972 sysbus_mmio_get_region(s, 0)); 973 974 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); 975 if (!pci_bus) 976 printf("couldn't create PCI controller!\n"); 977 978 if (pci_bus) { 979 /* Register network interfaces. */ 980 for (i = 0; i < nb_nics; i++) { 981 pci_nic_init_nofail(&nd_table[i], pci_bus, "virtio-net-pci", NULL); 982 } 983 } 984 985 /* Register spinning region */ 986 sysbus_create_simple("e500-spin", pmc->spin_base, NULL); 987 988 if (pmc->has_mpc8xxx_gpio) { 989 qemu_irq poweroff_irq; 990 991 dev = qdev_new("mpc8xxx_gpio"); 992 s = SYS_BUS_DEVICE(dev); 993 sysbus_realize_and_unref(s, &error_fatal); 994 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8XXX_GPIO_IRQ)); 995 memory_region_add_subregion(ccsr_addr_space, MPC8XXX_GPIO_OFFSET, 996 sysbus_mmio_get_region(s, 0)); 997 998 /* Power Off GPIO at Pin 0 */ 999 poweroff_irq = qemu_allocate_irq(ppce500_power_off, NULL, 0); 1000 qdev_connect_gpio_out(dev, 0, poweroff_irq); 1001 } 1002 1003 /* Platform Bus Device */ 1004 if (pmc->has_platform_bus) { 1005 dev = qdev_new(TYPE_PLATFORM_BUS_DEVICE); 1006 dev->id = TYPE_PLATFORM_BUS_DEVICE; 1007 qdev_prop_set_uint32(dev, "num_irqs", pmc->platform_bus_num_irqs); 1008 qdev_prop_set_uint32(dev, "mmio_size", pmc->platform_bus_size); 1009 sysbus_realize_and_unref(SYS_BUS_DEVICE(dev), &error_fatal); 1010 pms->pbus_dev = PLATFORM_BUS_DEVICE(dev); 1011 1012 s = SYS_BUS_DEVICE(pms->pbus_dev); 1013 for (i = 0; i < pmc->platform_bus_num_irqs; i++) { 1014 int irqn = pmc->platform_bus_first_irq + i; 1015 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn)); 1016 } 1017 1018 memory_region_add_subregion(address_space_mem, 1019 pmc->platform_bus_base, 1020 sysbus_mmio_get_region(s, 0)); 1021 } 1022 1023 /* 1024 * Smart firmware defaults ahead! 1025 * 1026 * We follow the following table to select which payload we execute. 1027 * 1028 * -kernel | -bios | payload 1029 * ---------+-------+--------- 1030 * N | Y | u-boot 1031 * N | N | u-boot 1032 * Y | Y | u-boot 1033 * Y | N | kernel 1034 * 1035 * This ensures backwards compatibility with how we used to expose 1036 * -kernel to users but allows them to run through u-boot as well. 1037 */ 1038 kernel_as_payload = false; 1039 if (machine->firmware == NULL) { 1040 if (machine->kernel_filename) { 1041 payload_name = machine->kernel_filename; 1042 kernel_as_payload = true; 1043 } else { 1044 payload_name = "u-boot.e500"; 1045 } 1046 } else { 1047 payload_name = machine->firmware; 1048 } 1049 1050 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, payload_name); 1051 if (!filename) { 1052 error_report("could not find firmware/kernel file '%s'", payload_name); 1053 exit(1); 1054 } 1055 1056 payload_size = load_elf(filename, NULL, NULL, NULL, 1057 &bios_entry, &loadaddr, NULL, NULL, 1058 1, PPC_ELF_MACHINE, 0, 0); 1059 if (payload_size < 0) { 1060 /* 1061 * Hrm. No ELF image? Try a uImage, maybe someone is giving us an 1062 * ePAPR compliant kernel 1063 */ 1064 loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; 1065 payload_size = load_uimage(filename, &bios_entry, &loadaddr, NULL, 1066 NULL, NULL); 1067 if (payload_size < 0) { 1068 error_report("could not load firmware '%s'", filename); 1069 exit(1); 1070 } 1071 } 1072 1073 g_free(filename); 1074 1075 if (kernel_as_payload) { 1076 kernel_base = loadaddr; 1077 kernel_size = payload_size; 1078 } 1079 1080 cur_base = loadaddr + payload_size; 1081 if (cur_base < 32 * MiB) { 1082 /* u-boot occupies memory up to 32MB, so load blobs above */ 1083 cur_base = 32 * MiB; 1084 } 1085 1086 /* Load bare kernel only if no bios/u-boot has been provided */ 1087 if (machine->kernel_filename && !kernel_as_payload) { 1088 kernel_base = cur_base; 1089 kernel_size = load_image_targphys(machine->kernel_filename, 1090 cur_base, 1091 machine->ram_size - cur_base); 1092 if (kernel_size < 0) { 1093 error_report("could not load kernel '%s'", 1094 machine->kernel_filename); 1095 exit(1); 1096 } 1097 1098 cur_base += kernel_size; 1099 } 1100 1101 /* Load initrd. */ 1102 if (machine->initrd_filename) { 1103 initrd_base = (cur_base + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK; 1104 initrd_size = load_image_targphys(machine->initrd_filename, initrd_base, 1105 machine->ram_size - initrd_base); 1106 1107 if (initrd_size < 0) { 1108 error_report("could not load initial ram disk '%s'", 1109 machine->initrd_filename); 1110 exit(1); 1111 } 1112 1113 cur_base = initrd_base + initrd_size; 1114 } 1115 1116 /* 1117 * Reserve space for dtb behind the kernel image because Linux has a bug 1118 * where it can only handle the dtb if it's within the first 64MB of where 1119 * <kernel> starts. dtb cannot not reach initrd_base because INITRD_LOAD_PAD 1120 * ensures enough space between kernel and initrd. 1121 */ 1122 dt_base = (loadaddr + payload_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK; 1123 if (dt_base + DTB_MAX_SIZE > machine->ram_size) { 1124 error_report("not enough memory for device tree"); 1125 exit(1); 1126 } 1127 1128 dt_size = ppce500_prep_device_tree(pms, dt_base, 1129 initrd_base, initrd_size, 1130 kernel_base, kernel_size); 1131 if (dt_size < 0) { 1132 error_report("couldn't load device tree"); 1133 exit(1); 1134 } 1135 assert(dt_size < DTB_MAX_SIZE); 1136 1137 boot_info = env->load_info; 1138 boot_info->entry = bios_entry; 1139 boot_info->dt_base = dt_base; 1140 boot_info->dt_size = dt_size; 1141 } 1142 1143 static void e500_ccsr_initfn(Object *obj) 1144 { 1145 PPCE500CCSRState *ccsr = CCSR(obj); 1146 memory_region_init(&ccsr->ccsr_space, obj, "e500-ccsr", 1147 MPC8544_CCSRBAR_SIZE); 1148 } 1149 1150 static const TypeInfo e500_ccsr_info = { 1151 .name = TYPE_CCSR, 1152 .parent = TYPE_SYS_BUS_DEVICE, 1153 .instance_size = sizeof(PPCE500CCSRState), 1154 .instance_init = e500_ccsr_initfn, 1155 }; 1156 1157 static const TypeInfo ppce500_info = { 1158 .name = TYPE_PPCE500_MACHINE, 1159 .parent = TYPE_MACHINE, 1160 .abstract = true, 1161 .instance_size = sizeof(PPCE500MachineState), 1162 .class_size = sizeof(PPCE500MachineClass), 1163 }; 1164 1165 static void e500_register_types(void) 1166 { 1167 type_register_static(&e500_ccsr_info); 1168 type_register_static(&ppce500_info); 1169 } 1170 1171 type_init(e500_register_types) 1172