1 /* 2 * QEMU PowerPC e500-based platforms 3 * 4 * Copyright (C) 2009 Freescale Semiconductor, Inc. All rights reserved. 5 * 6 * Author: Yu Liu, <yu.liu@freescale.com> 7 * 8 * This file is derived from hw/ppc440_bamboo.c, 9 * the copyright for that material belongs to the original owners. 10 * 11 * This is free software; you can redistribute it and/or modify 12 * it under the terms of the GNU General Public License as published by 13 * the Free Software Foundation; either version 2 of the License, or 14 * (at your option) any later version. 15 */ 16 17 #include "qemu/osdep.h" 18 #include "qemu/units.h" 19 #include "qapi/error.h" 20 #include "e500.h" 21 #include "e500-ccsr.h" 22 #include "net/net.h" 23 #include "qemu/config-file.h" 24 #include "hw/hw.h" 25 #include "hw/char/serial.h" 26 #include "hw/pci/pci.h" 27 #include "hw/boards.h" 28 #include "sysemu/sysemu.h" 29 #include "sysemu/kvm.h" 30 #include "kvm_ppc.h" 31 #include "sysemu/device_tree.h" 32 #include "hw/ppc/openpic.h" 33 #include "hw/ppc/openpic_kvm.h" 34 #include "hw/ppc/ppc.h" 35 #include "hw/loader.h" 36 #include "elf.h" 37 #include "hw/sysbus.h" 38 #include "exec/address-spaces.h" 39 #include "qemu/host-utils.h" 40 #include "qemu/option.h" 41 #include "hw/pci-host/ppce500.h" 42 #include "qemu/error-report.h" 43 #include "hw/platform-bus.h" 44 #include "hw/net/fsl_etsec/etsec.h" 45 46 #define EPAPR_MAGIC (0x45504150) 47 #define BINARY_DEVICE_TREE_FILE "mpc8544ds.dtb" 48 #define DTC_LOAD_PAD 0x1800000 49 #define DTC_PAD_MASK 0xFFFFF 50 #define DTB_MAX_SIZE (8 * MiB) 51 #define INITRD_LOAD_PAD 0x2000000 52 #define INITRD_PAD_MASK 0xFFFFFF 53 54 #define RAM_SIZES_ALIGN (64 * MiB) 55 56 /* TODO: parameterize */ 57 #define MPC8544_CCSRBAR_SIZE 0x00100000ULL 58 #define MPC8544_MPIC_REGS_OFFSET 0x40000ULL 59 #define MPC8544_MSI_REGS_OFFSET 0x41600ULL 60 #define MPC8544_SERIAL0_REGS_OFFSET 0x4500ULL 61 #define MPC8544_SERIAL1_REGS_OFFSET 0x4600ULL 62 #define MPC8544_PCI_REGS_OFFSET 0x8000ULL 63 #define MPC8544_PCI_REGS_SIZE 0x1000ULL 64 #define MPC8544_UTIL_OFFSET 0xe0000ULL 65 #define MPC8XXX_GPIO_OFFSET 0x000FF000ULL 66 #define MPC8XXX_GPIO_IRQ 47 67 68 struct boot_info 69 { 70 uint32_t dt_base; 71 uint32_t dt_size; 72 uint32_t entry; 73 }; 74 75 static uint32_t *pci_map_create(void *fdt, uint32_t mpic, int first_slot, 76 int nr_slots, int *len) 77 { 78 int i = 0; 79 int slot; 80 int pci_irq; 81 int host_irq; 82 int last_slot = first_slot + nr_slots; 83 uint32_t *pci_map; 84 85 *len = nr_slots * 4 * 7 * sizeof(uint32_t); 86 pci_map = g_malloc(*len); 87 88 for (slot = first_slot; slot < last_slot; slot++) { 89 for (pci_irq = 0; pci_irq < 4; pci_irq++) { 90 pci_map[i++] = cpu_to_be32(slot << 11); 91 pci_map[i++] = cpu_to_be32(0x0); 92 pci_map[i++] = cpu_to_be32(0x0); 93 pci_map[i++] = cpu_to_be32(pci_irq + 1); 94 pci_map[i++] = cpu_to_be32(mpic); 95 host_irq = ppce500_pci_map_irq_slot(slot, pci_irq); 96 pci_map[i++] = cpu_to_be32(host_irq + 1); 97 pci_map[i++] = cpu_to_be32(0x1); 98 } 99 } 100 101 assert((i * sizeof(uint32_t)) == *len); 102 103 return pci_map; 104 } 105 106 static void dt_serial_create(void *fdt, unsigned long long offset, 107 const char *soc, const char *mpic, 108 const char *alias, int idx, bool defcon) 109 { 110 char *ser; 111 112 ser = g_strdup_printf("%s/serial@%llx", soc, offset); 113 qemu_fdt_add_subnode(fdt, ser); 114 qemu_fdt_setprop_string(fdt, ser, "device_type", "serial"); 115 qemu_fdt_setprop_string(fdt, ser, "compatible", "ns16550"); 116 qemu_fdt_setprop_cells(fdt, ser, "reg", offset, 0x100); 117 qemu_fdt_setprop_cell(fdt, ser, "cell-index", idx); 118 qemu_fdt_setprop_cell(fdt, ser, "clock-frequency", 0); 119 qemu_fdt_setprop_cells(fdt, ser, "interrupts", 42, 2); 120 qemu_fdt_setprop_phandle(fdt, ser, "interrupt-parent", mpic); 121 qemu_fdt_setprop_string(fdt, "/aliases", alias, ser); 122 123 if (defcon) { 124 /* 125 * "linux,stdout-path" and "stdout" properties are deprecated by linux 126 * kernel. New platforms should only use the "stdout-path" property. Set 127 * the new property and continue using older property to remain 128 * compatible with the existing firmware. 129 */ 130 qemu_fdt_setprop_string(fdt, "/chosen", "linux,stdout-path", ser); 131 qemu_fdt_setprop_string(fdt, "/chosen", "stdout-path", ser); 132 } 133 g_free(ser); 134 } 135 136 static void create_dt_mpc8xxx_gpio(void *fdt, const char *soc, const char *mpic) 137 { 138 hwaddr mmio0 = MPC8XXX_GPIO_OFFSET; 139 int irq0 = MPC8XXX_GPIO_IRQ; 140 gchar *node = g_strdup_printf("%s/gpio@%"PRIx64, soc, mmio0); 141 gchar *poweroff = g_strdup_printf("%s/power-off", soc); 142 int gpio_ph; 143 144 qemu_fdt_add_subnode(fdt, node); 145 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,qoriq-gpio"); 146 qemu_fdt_setprop_cells(fdt, node, "reg", mmio0, 0x1000); 147 qemu_fdt_setprop_cells(fdt, node, "interrupts", irq0, 0x2); 148 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 149 qemu_fdt_setprop_cells(fdt, node, "#gpio-cells", 2); 150 qemu_fdt_setprop(fdt, node, "gpio-controller", NULL, 0); 151 gpio_ph = qemu_fdt_alloc_phandle(fdt); 152 qemu_fdt_setprop_cell(fdt, node, "phandle", gpio_ph); 153 qemu_fdt_setprop_cell(fdt, node, "linux,phandle", gpio_ph); 154 155 /* Power Off Pin */ 156 qemu_fdt_add_subnode(fdt, poweroff); 157 qemu_fdt_setprop_string(fdt, poweroff, "compatible", "gpio-poweroff"); 158 qemu_fdt_setprop_cells(fdt, poweroff, "gpios", gpio_ph, 0, 0); 159 160 g_free(node); 161 g_free(poweroff); 162 } 163 164 typedef struct PlatformDevtreeData { 165 void *fdt; 166 const char *mpic; 167 int irq_start; 168 const char *node; 169 PlatformBusDevice *pbus; 170 } PlatformDevtreeData; 171 172 static int create_devtree_etsec(SysBusDevice *sbdev, PlatformDevtreeData *data) 173 { 174 eTSEC *etsec = ETSEC_COMMON(sbdev); 175 PlatformBusDevice *pbus = data->pbus; 176 hwaddr mmio0 = platform_bus_get_mmio_addr(pbus, sbdev, 0); 177 int irq0 = platform_bus_get_irqn(pbus, sbdev, 0); 178 int irq1 = platform_bus_get_irqn(pbus, sbdev, 1); 179 int irq2 = platform_bus_get_irqn(pbus, sbdev, 2); 180 gchar *node = g_strdup_printf("/platform/ethernet@%"PRIx64, mmio0); 181 gchar *group = g_strdup_printf("%s/queue-group", node); 182 void *fdt = data->fdt; 183 184 assert((int64_t)mmio0 >= 0); 185 assert(irq0 >= 0); 186 assert(irq1 >= 0); 187 assert(irq2 >= 0); 188 189 qemu_fdt_add_subnode(fdt, node); 190 qemu_fdt_setprop_string(fdt, node, "device_type", "network"); 191 qemu_fdt_setprop_string(fdt, node, "compatible", "fsl,etsec2"); 192 qemu_fdt_setprop_string(fdt, node, "model", "eTSEC"); 193 qemu_fdt_setprop(fdt, node, "local-mac-address", etsec->conf.macaddr.a, 6); 194 qemu_fdt_setprop_cells(fdt, node, "fixed-link", 0, 1, 1000, 0, 0); 195 196 qemu_fdt_add_subnode(fdt, group); 197 qemu_fdt_setprop_cells(fdt, group, "reg", mmio0, 0x1000); 198 qemu_fdt_setprop_cells(fdt, group, "interrupts", 199 data->irq_start + irq0, 0x2, 200 data->irq_start + irq1, 0x2, 201 data->irq_start + irq2, 0x2); 202 203 g_free(node); 204 g_free(group); 205 206 return 0; 207 } 208 209 static void sysbus_device_create_devtree(SysBusDevice *sbdev, void *opaque) 210 { 211 PlatformDevtreeData *data = opaque; 212 bool matched = false; 213 214 if (object_dynamic_cast(OBJECT(sbdev), TYPE_ETSEC_COMMON)) { 215 create_devtree_etsec(sbdev, data); 216 matched = true; 217 } 218 219 if (!matched) { 220 error_report("Device %s is not supported by this machine yet.", 221 qdev_fw_name(DEVICE(sbdev))); 222 exit(1); 223 } 224 } 225 226 static void platform_bus_create_devtree(PPCE500MachineState *pms, 227 void *fdt, const char *mpic) 228 { 229 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 230 gchar *node = g_strdup_printf("/platform@%"PRIx64, pmc->platform_bus_base); 231 const char platcomp[] = "qemu,platform\0simple-bus"; 232 uint64_t addr = pmc->platform_bus_base; 233 uint64_t size = pmc->platform_bus_size; 234 int irq_start = pmc->platform_bus_first_irq; 235 236 /* Create a /platform node that we can put all devices into */ 237 238 qemu_fdt_add_subnode(fdt, node); 239 qemu_fdt_setprop(fdt, node, "compatible", platcomp, sizeof(platcomp)); 240 241 /* Our platform bus region is less than 32bit big, so 1 cell is enough for 242 address and size */ 243 qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1); 244 qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1); 245 qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr, size); 246 247 qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic); 248 249 /* Create dt nodes for dynamic devices */ 250 PlatformDevtreeData data = { 251 .fdt = fdt, 252 .mpic = mpic, 253 .irq_start = irq_start, 254 .node = node, 255 .pbus = pms->pbus_dev, 256 }; 257 258 /* Loop through all dynamic sysbus devices and create nodes for them */ 259 foreach_dynamic_sysbus_device(sysbus_device_create_devtree, &data); 260 261 g_free(node); 262 } 263 264 static int ppce500_load_device_tree(PPCE500MachineState *pms, 265 hwaddr addr, 266 hwaddr initrd_base, 267 hwaddr initrd_size, 268 hwaddr kernel_base, 269 hwaddr kernel_size, 270 bool dry_run) 271 { 272 MachineState *machine = MACHINE(pms); 273 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 274 CPUPPCState *env = first_cpu->env_ptr; 275 int ret = -1; 276 uint64_t mem_reg_property[] = { 0, cpu_to_be64(machine->ram_size) }; 277 int fdt_size; 278 void *fdt; 279 uint8_t hypercall[16]; 280 uint32_t clock_freq = 400000000; 281 uint32_t tb_freq = 400000000; 282 int i; 283 char compatible_sb[] = "fsl,mpc8544-immr\0simple-bus"; 284 char *soc; 285 char *mpic; 286 uint32_t mpic_ph; 287 uint32_t msi_ph; 288 char *gutil; 289 char *pci; 290 char *msi; 291 uint32_t *pci_map = NULL; 292 int len; 293 uint32_t pci_ranges[14] = 294 { 295 0x2000000, 0x0, pmc->pci_mmio_bus_base, 296 pmc->pci_mmio_base >> 32, pmc->pci_mmio_base, 297 0x0, 0x20000000, 298 299 0x1000000, 0x0, 0x0, 300 pmc->pci_pio_base >> 32, pmc->pci_pio_base, 301 0x0, 0x10000, 302 }; 303 QemuOpts *machine_opts = qemu_get_machine_opts(); 304 const char *dtb_file = qemu_opt_get(machine_opts, "dtb"); 305 const char *toplevel_compat = qemu_opt_get(machine_opts, "dt_compatible"); 306 307 if (dtb_file) { 308 char *filename; 309 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, dtb_file); 310 if (!filename) { 311 goto out; 312 } 313 314 fdt = load_device_tree(filename, &fdt_size); 315 g_free(filename); 316 if (!fdt) { 317 goto out; 318 } 319 goto done; 320 } 321 322 fdt = create_device_tree(&fdt_size); 323 if (fdt == NULL) { 324 goto out; 325 } 326 327 /* Manipulate device tree in memory. */ 328 qemu_fdt_setprop_cell(fdt, "/", "#address-cells", 2); 329 qemu_fdt_setprop_cell(fdt, "/", "#size-cells", 2); 330 331 qemu_fdt_add_subnode(fdt, "/memory"); 332 qemu_fdt_setprop_string(fdt, "/memory", "device_type", "memory"); 333 qemu_fdt_setprop(fdt, "/memory", "reg", mem_reg_property, 334 sizeof(mem_reg_property)); 335 336 qemu_fdt_add_subnode(fdt, "/chosen"); 337 if (initrd_size) { 338 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-start", 339 initrd_base); 340 if (ret < 0) { 341 fprintf(stderr, "couldn't set /chosen/linux,initrd-start\n"); 342 } 343 344 ret = qemu_fdt_setprop_cell(fdt, "/chosen", "linux,initrd-end", 345 (initrd_base + initrd_size)); 346 if (ret < 0) { 347 fprintf(stderr, "couldn't set /chosen/linux,initrd-end\n"); 348 } 349 350 } 351 352 if (kernel_base != -1ULL) { 353 qemu_fdt_setprop_cells(fdt, "/chosen", "qemu,boot-kernel", 354 kernel_base >> 32, kernel_base, 355 kernel_size >> 32, kernel_size); 356 } 357 358 ret = qemu_fdt_setprop_string(fdt, "/chosen", "bootargs", 359 machine->kernel_cmdline); 360 if (ret < 0) 361 fprintf(stderr, "couldn't set /chosen/bootargs\n"); 362 363 if (kvm_enabled()) { 364 /* Read out host's frequencies */ 365 clock_freq = kvmppc_get_clockfreq(); 366 tb_freq = kvmppc_get_tbfreq(); 367 368 /* indicate KVM hypercall interface */ 369 qemu_fdt_add_subnode(fdt, "/hypervisor"); 370 qemu_fdt_setprop_string(fdt, "/hypervisor", "compatible", 371 "linux,kvm"); 372 kvmppc_get_hypercall(env, hypercall, sizeof(hypercall)); 373 qemu_fdt_setprop(fdt, "/hypervisor", "hcall-instructions", 374 hypercall, sizeof(hypercall)); 375 /* if KVM supports the idle hcall, set property indicating this */ 376 if (kvmppc_get_hasidle(env)) { 377 qemu_fdt_setprop(fdt, "/hypervisor", "has-idle", NULL, 0); 378 } 379 } 380 381 /* Create CPU nodes */ 382 qemu_fdt_add_subnode(fdt, "/cpus"); 383 qemu_fdt_setprop_cell(fdt, "/cpus", "#address-cells", 1); 384 qemu_fdt_setprop_cell(fdt, "/cpus", "#size-cells", 0); 385 386 /* We need to generate the cpu nodes in reverse order, so Linux can pick 387 the first node as boot node and be happy */ 388 for (i = smp_cpus - 1; i >= 0; i--) { 389 CPUState *cpu; 390 char *cpu_name; 391 uint64_t cpu_release_addr = pmc->spin_base + (i * 0x20); 392 393 cpu = qemu_get_cpu(i); 394 if (cpu == NULL) { 395 continue; 396 } 397 env = cpu->env_ptr; 398 399 cpu_name = g_strdup_printf("/cpus/PowerPC,8544@%x", i); 400 qemu_fdt_add_subnode(fdt, cpu_name); 401 qemu_fdt_setprop_cell(fdt, cpu_name, "clock-frequency", clock_freq); 402 qemu_fdt_setprop_cell(fdt, cpu_name, "timebase-frequency", tb_freq); 403 qemu_fdt_setprop_string(fdt, cpu_name, "device_type", "cpu"); 404 qemu_fdt_setprop_cell(fdt, cpu_name, "reg", i); 405 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-line-size", 406 env->dcache_line_size); 407 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-line-size", 408 env->icache_line_size); 409 qemu_fdt_setprop_cell(fdt, cpu_name, "d-cache-size", 0x8000); 410 qemu_fdt_setprop_cell(fdt, cpu_name, "i-cache-size", 0x8000); 411 qemu_fdt_setprop_cell(fdt, cpu_name, "bus-frequency", 0); 412 if (cpu->cpu_index) { 413 qemu_fdt_setprop_string(fdt, cpu_name, "status", "disabled"); 414 qemu_fdt_setprop_string(fdt, cpu_name, "enable-method", 415 "spin-table"); 416 qemu_fdt_setprop_u64(fdt, cpu_name, "cpu-release-addr", 417 cpu_release_addr); 418 } else { 419 qemu_fdt_setprop_string(fdt, cpu_name, "status", "okay"); 420 } 421 g_free(cpu_name); 422 } 423 424 qemu_fdt_add_subnode(fdt, "/aliases"); 425 /* XXX These should go into their respective devices' code */ 426 soc = g_strdup_printf("/soc@%"PRIx64, pmc->ccsrbar_base); 427 qemu_fdt_add_subnode(fdt, soc); 428 qemu_fdt_setprop_string(fdt, soc, "device_type", "soc"); 429 qemu_fdt_setprop(fdt, soc, "compatible", compatible_sb, 430 sizeof(compatible_sb)); 431 qemu_fdt_setprop_cell(fdt, soc, "#address-cells", 1); 432 qemu_fdt_setprop_cell(fdt, soc, "#size-cells", 1); 433 qemu_fdt_setprop_cells(fdt, soc, "ranges", 0x0, 434 pmc->ccsrbar_base >> 32, pmc->ccsrbar_base, 435 MPC8544_CCSRBAR_SIZE); 436 /* XXX should contain a reasonable value */ 437 qemu_fdt_setprop_cell(fdt, soc, "bus-frequency", 0); 438 439 mpic = g_strdup_printf("%s/pic@%llx", soc, MPC8544_MPIC_REGS_OFFSET); 440 qemu_fdt_add_subnode(fdt, mpic); 441 qemu_fdt_setprop_string(fdt, mpic, "device_type", "open-pic"); 442 qemu_fdt_setprop_string(fdt, mpic, "compatible", "fsl,mpic"); 443 qemu_fdt_setprop_cells(fdt, mpic, "reg", MPC8544_MPIC_REGS_OFFSET, 444 0x40000); 445 qemu_fdt_setprop_cell(fdt, mpic, "#address-cells", 0); 446 qemu_fdt_setprop_cell(fdt, mpic, "#interrupt-cells", 2); 447 mpic_ph = qemu_fdt_alloc_phandle(fdt); 448 qemu_fdt_setprop_cell(fdt, mpic, "phandle", mpic_ph); 449 qemu_fdt_setprop_cell(fdt, mpic, "linux,phandle", mpic_ph); 450 qemu_fdt_setprop(fdt, mpic, "interrupt-controller", NULL, 0); 451 452 /* 453 * We have to generate ser1 first, because Linux takes the first 454 * device it finds in the dt as serial output device. And we generate 455 * devices in reverse order to the dt. 456 */ 457 if (serial_hd(1)) { 458 dt_serial_create(fdt, MPC8544_SERIAL1_REGS_OFFSET, 459 soc, mpic, "serial1", 1, false); 460 } 461 462 if (serial_hd(0)) { 463 dt_serial_create(fdt, MPC8544_SERIAL0_REGS_OFFSET, 464 soc, mpic, "serial0", 0, true); 465 } 466 467 gutil = g_strdup_printf("%s/global-utilities@%llx", soc, 468 MPC8544_UTIL_OFFSET); 469 qemu_fdt_add_subnode(fdt, gutil); 470 qemu_fdt_setprop_string(fdt, gutil, "compatible", "fsl,mpc8544-guts"); 471 qemu_fdt_setprop_cells(fdt, gutil, "reg", MPC8544_UTIL_OFFSET, 0x1000); 472 qemu_fdt_setprop(fdt, gutil, "fsl,has-rstcr", NULL, 0); 473 g_free(gutil); 474 475 msi = g_strdup_printf("/%s/msi@%llx", soc, MPC8544_MSI_REGS_OFFSET); 476 qemu_fdt_add_subnode(fdt, msi); 477 qemu_fdt_setprop_string(fdt, msi, "compatible", "fsl,mpic-msi"); 478 qemu_fdt_setprop_cells(fdt, msi, "reg", MPC8544_MSI_REGS_OFFSET, 0x200); 479 msi_ph = qemu_fdt_alloc_phandle(fdt); 480 qemu_fdt_setprop_cells(fdt, msi, "msi-available-ranges", 0x0, 0x100); 481 qemu_fdt_setprop_phandle(fdt, msi, "interrupt-parent", mpic); 482 qemu_fdt_setprop_cells(fdt, msi, "interrupts", 483 0xe0, 0x0, 484 0xe1, 0x0, 485 0xe2, 0x0, 486 0xe3, 0x0, 487 0xe4, 0x0, 488 0xe5, 0x0, 489 0xe6, 0x0, 490 0xe7, 0x0); 491 qemu_fdt_setprop_cell(fdt, msi, "phandle", msi_ph); 492 qemu_fdt_setprop_cell(fdt, msi, "linux,phandle", msi_ph); 493 g_free(msi); 494 495 pci = g_strdup_printf("/pci@%llx", 496 pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET); 497 qemu_fdt_add_subnode(fdt, pci); 498 qemu_fdt_setprop_cell(fdt, pci, "cell-index", 0); 499 qemu_fdt_setprop_string(fdt, pci, "compatible", "fsl,mpc8540-pci"); 500 qemu_fdt_setprop_string(fdt, pci, "device_type", "pci"); 501 qemu_fdt_setprop_cells(fdt, pci, "interrupt-map-mask", 0xf800, 0x0, 502 0x0, 0x7); 503 pci_map = pci_map_create(fdt, qemu_fdt_get_phandle(fdt, mpic), 504 pmc->pci_first_slot, pmc->pci_nr_slots, 505 &len); 506 qemu_fdt_setprop(fdt, pci, "interrupt-map", pci_map, len); 507 qemu_fdt_setprop_phandle(fdt, pci, "interrupt-parent", mpic); 508 qemu_fdt_setprop_cells(fdt, pci, "interrupts", 24, 2); 509 qemu_fdt_setprop_cells(fdt, pci, "bus-range", 0, 255); 510 for (i = 0; i < 14; i++) { 511 pci_ranges[i] = cpu_to_be32(pci_ranges[i]); 512 } 513 qemu_fdt_setprop_cell(fdt, pci, "fsl,msi", msi_ph); 514 qemu_fdt_setprop(fdt, pci, "ranges", pci_ranges, sizeof(pci_ranges)); 515 qemu_fdt_setprop_cells(fdt, pci, "reg", 516 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET) >> 32, 517 (pmc->ccsrbar_base + MPC8544_PCI_REGS_OFFSET), 518 0, 0x1000); 519 qemu_fdt_setprop_cell(fdt, pci, "clock-frequency", 66666666); 520 qemu_fdt_setprop_cell(fdt, pci, "#interrupt-cells", 1); 521 qemu_fdt_setprop_cell(fdt, pci, "#size-cells", 2); 522 qemu_fdt_setprop_cell(fdt, pci, "#address-cells", 3); 523 qemu_fdt_setprop_string(fdt, "/aliases", "pci0", pci); 524 g_free(pci); 525 526 if (pmc->has_mpc8xxx_gpio) { 527 create_dt_mpc8xxx_gpio(fdt, soc, mpic); 528 } 529 g_free(soc); 530 531 if (pms->pbus_dev) { 532 platform_bus_create_devtree(pms, fdt, mpic); 533 } 534 g_free(mpic); 535 536 pmc->fixup_devtree(fdt); 537 538 if (toplevel_compat) { 539 qemu_fdt_setprop(fdt, "/", "compatible", toplevel_compat, 540 strlen(toplevel_compat) + 1); 541 } 542 543 done: 544 if (!dry_run) { 545 qemu_fdt_dumpdtb(fdt, fdt_size); 546 cpu_physical_memory_write(addr, fdt, fdt_size); 547 } 548 ret = fdt_size; 549 550 out: 551 g_free(pci_map); 552 553 return ret; 554 } 555 556 typedef struct DeviceTreeParams { 557 PPCE500MachineState *machine; 558 hwaddr addr; 559 hwaddr initrd_base; 560 hwaddr initrd_size; 561 hwaddr kernel_base; 562 hwaddr kernel_size; 563 Notifier notifier; 564 } DeviceTreeParams; 565 566 static void ppce500_reset_device_tree(void *opaque) 567 { 568 DeviceTreeParams *p = opaque; 569 ppce500_load_device_tree(p->machine, p->addr, p->initrd_base, 570 p->initrd_size, p->kernel_base, p->kernel_size, 571 false); 572 } 573 574 static void ppce500_init_notify(Notifier *notifier, void *data) 575 { 576 DeviceTreeParams *p = container_of(notifier, DeviceTreeParams, notifier); 577 ppce500_reset_device_tree(p); 578 } 579 580 static int ppce500_prep_device_tree(PPCE500MachineState *machine, 581 hwaddr addr, 582 hwaddr initrd_base, 583 hwaddr initrd_size, 584 hwaddr kernel_base, 585 hwaddr kernel_size) 586 { 587 DeviceTreeParams *p = g_new(DeviceTreeParams, 1); 588 p->machine = machine; 589 p->addr = addr; 590 p->initrd_base = initrd_base; 591 p->initrd_size = initrd_size; 592 p->kernel_base = kernel_base; 593 p->kernel_size = kernel_size; 594 595 qemu_register_reset(ppce500_reset_device_tree, p); 596 p->notifier.notify = ppce500_init_notify; 597 qemu_add_machine_init_done_notifier(&p->notifier); 598 599 /* Issue the device tree loader once, so that we get the size of the blob */ 600 return ppce500_load_device_tree(machine, addr, initrd_base, initrd_size, 601 kernel_base, kernel_size, true); 602 } 603 604 /* Create -kernel TLB entries for BookE. */ 605 hwaddr booke206_page_size_to_tlb(uint64_t size) 606 { 607 return 63 - clz64(size / KiB); 608 } 609 610 static int booke206_initial_map_tsize(CPUPPCState *env) 611 { 612 struct boot_info *bi = env->load_info; 613 hwaddr dt_end; 614 int ps; 615 616 /* Our initial TLB entry needs to cover everything from 0 to 617 the device tree top */ 618 dt_end = bi->dt_base + bi->dt_size; 619 ps = booke206_page_size_to_tlb(dt_end) + 1; 620 if (ps & 1) { 621 /* e500v2 can only do even TLB size bits */ 622 ps++; 623 } 624 return ps; 625 } 626 627 static uint64_t mmubooke_initial_mapsize(CPUPPCState *env) 628 { 629 int tsize; 630 631 tsize = booke206_initial_map_tsize(env); 632 return (1ULL << 10 << tsize); 633 } 634 635 static void mmubooke_create_initial_mapping(CPUPPCState *env) 636 { 637 ppcmas_tlb_t *tlb = booke206_get_tlbm(env, 1, 0, 0); 638 hwaddr size; 639 int ps; 640 641 ps = booke206_initial_map_tsize(env); 642 size = (ps << MAS1_TSIZE_SHIFT); 643 tlb->mas1 = MAS1_VALID | size; 644 tlb->mas2 = 0; 645 tlb->mas7_3 = 0; 646 tlb->mas7_3 |= MAS3_UR | MAS3_UW | MAS3_UX | MAS3_SR | MAS3_SW | MAS3_SX; 647 648 env->tlb_dirty = true; 649 } 650 651 static void ppce500_cpu_reset_sec(void *opaque) 652 { 653 PowerPCCPU *cpu = opaque; 654 CPUState *cs = CPU(cpu); 655 656 cpu_reset(cs); 657 658 /* Secondary CPU starts in halted state for now. Needs to change when 659 implementing non-kernel boot. */ 660 cs->halted = 1; 661 cs->exception_index = EXCP_HLT; 662 } 663 664 static void ppce500_cpu_reset(void *opaque) 665 { 666 PowerPCCPU *cpu = opaque; 667 CPUState *cs = CPU(cpu); 668 CPUPPCState *env = &cpu->env; 669 struct boot_info *bi = env->load_info; 670 671 cpu_reset(cs); 672 673 /* Set initial guest state. */ 674 cs->halted = 0; 675 env->gpr[1] = (16 * MiB) - 8; 676 env->gpr[3] = bi->dt_base; 677 env->gpr[4] = 0; 678 env->gpr[5] = 0; 679 env->gpr[6] = EPAPR_MAGIC; 680 env->gpr[7] = mmubooke_initial_mapsize(env); 681 env->gpr[8] = 0; 682 env->gpr[9] = 0; 683 env->nip = bi->entry; 684 mmubooke_create_initial_mapping(env); 685 } 686 687 static DeviceState *ppce500_init_mpic_qemu(PPCE500MachineState *pms, 688 IrqLines *irqs) 689 { 690 DeviceState *dev; 691 SysBusDevice *s; 692 int i, j, k; 693 MachineState *machine = MACHINE(pms); 694 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 695 696 dev = qdev_create(NULL, TYPE_OPENPIC); 697 object_property_add_child(OBJECT(machine), "pic", OBJECT(dev), 698 &error_fatal); 699 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 700 qdev_prop_set_uint32(dev, "nb_cpus", smp_cpus); 701 702 qdev_init_nofail(dev); 703 s = SYS_BUS_DEVICE(dev); 704 705 k = 0; 706 for (i = 0; i < smp_cpus; i++) { 707 for (j = 0; j < OPENPIC_OUTPUT_NB; j++) { 708 sysbus_connect_irq(s, k++, irqs[i].irq[j]); 709 } 710 } 711 712 return dev; 713 } 714 715 static DeviceState *ppce500_init_mpic_kvm(const PPCE500MachineClass *pmc, 716 IrqLines *irqs, Error **errp) 717 { 718 Error *err = NULL; 719 DeviceState *dev; 720 CPUState *cs; 721 722 dev = qdev_create(NULL, TYPE_KVM_OPENPIC); 723 qdev_prop_set_uint32(dev, "model", pmc->mpic_version); 724 725 object_property_set_bool(OBJECT(dev), true, "realized", &err); 726 if (err) { 727 error_propagate(errp, err); 728 object_unparent(OBJECT(dev)); 729 return NULL; 730 } 731 732 CPU_FOREACH(cs) { 733 if (kvm_openpic_connect_vcpu(dev, cs)) { 734 fprintf(stderr, "%s: failed to connect vcpu to irqchip\n", 735 __func__); 736 abort(); 737 } 738 } 739 740 return dev; 741 } 742 743 static DeviceState *ppce500_init_mpic(PPCE500MachineState *pms, 744 MemoryRegion *ccsr, 745 IrqLines *irqs) 746 { 747 MachineState *machine = MACHINE(pms); 748 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(pms); 749 DeviceState *dev = NULL; 750 SysBusDevice *s; 751 752 if (kvm_enabled()) { 753 Error *err = NULL; 754 755 if (machine_kernel_irqchip_allowed(machine)) { 756 dev = ppce500_init_mpic_kvm(pmc, irqs, &err); 757 } 758 if (machine_kernel_irqchip_required(machine) && !dev) { 759 error_reportf_err(err, 760 "kernel_irqchip requested but unavailable: "); 761 exit(1); 762 } 763 } 764 765 if (!dev) { 766 dev = ppce500_init_mpic_qemu(pms, irqs); 767 } 768 769 s = SYS_BUS_DEVICE(dev); 770 memory_region_add_subregion(ccsr, MPC8544_MPIC_REGS_OFFSET, 771 s->mmio[0].memory); 772 773 return dev; 774 } 775 776 static void ppce500_power_off(void *opaque, int line, int on) 777 { 778 if (on) { 779 qemu_system_shutdown_request(SHUTDOWN_CAUSE_GUEST_SHUTDOWN); 780 } 781 } 782 783 void ppce500_init(MachineState *machine) 784 { 785 MemoryRegion *address_space_mem = get_system_memory(); 786 MemoryRegion *ram = g_new(MemoryRegion, 1); 787 PPCE500MachineState *pms = PPCE500_MACHINE(machine); 788 const PPCE500MachineClass *pmc = PPCE500_MACHINE_GET_CLASS(machine); 789 PCIBus *pci_bus; 790 CPUPPCState *env = NULL; 791 uint64_t loadaddr; 792 hwaddr kernel_base = -1LL; 793 int kernel_size = 0; 794 hwaddr dt_base = 0; 795 hwaddr initrd_base = 0; 796 int initrd_size = 0; 797 hwaddr cur_base = 0; 798 char *filename; 799 const char *payload_name; 800 bool kernel_as_payload; 801 hwaddr bios_entry = 0; 802 target_long payload_size; 803 struct boot_info *boot_info; 804 int dt_size; 805 int i; 806 /* irq num for pin INTA, INTB, INTC and INTD is 1, 2, 3 and 807 * 4 respectively */ 808 unsigned int pci_irq_nrs[PCI_NUM_PINS] = {1, 2, 3, 4}; 809 IrqLines *irqs; 810 DeviceState *dev, *mpicdev; 811 CPUPPCState *firstenv = NULL; 812 MemoryRegion *ccsr_addr_space; 813 SysBusDevice *s; 814 PPCE500CCSRState *ccsr; 815 816 irqs = g_new0(IrqLines, smp_cpus); 817 for (i = 0; i < smp_cpus; i++) { 818 PowerPCCPU *cpu; 819 CPUState *cs; 820 qemu_irq *input; 821 822 cpu = POWERPC_CPU(cpu_create(machine->cpu_type)); 823 env = &cpu->env; 824 cs = CPU(cpu); 825 826 if (env->mmu_model != POWERPC_MMU_BOOKE206) { 827 error_report("MMU model %i not supported by this machine", 828 env->mmu_model); 829 exit(1); 830 } 831 832 if (!firstenv) { 833 firstenv = env; 834 } 835 836 input = (qemu_irq *)env->irq_inputs; 837 irqs[i].irq[OPENPIC_OUTPUT_INT] = input[PPCE500_INPUT_INT]; 838 irqs[i].irq[OPENPIC_OUTPUT_CINT] = input[PPCE500_INPUT_CINT]; 839 env->spr_cb[SPR_BOOKE_PIR].default_value = cs->cpu_index = i; 840 env->mpic_iack = pmc->ccsrbar_base + MPC8544_MPIC_REGS_OFFSET + 0xa0; 841 842 ppc_booke_timers_init(cpu, 400000000, PPC_TIMER_E500); 843 844 /* Register reset handler */ 845 if (!i) { 846 /* Primary CPU */ 847 struct boot_info *boot_info; 848 boot_info = g_malloc0(sizeof(struct boot_info)); 849 qemu_register_reset(ppce500_cpu_reset, cpu); 850 env->load_info = boot_info; 851 } else { 852 /* Secondary CPUs */ 853 qemu_register_reset(ppce500_cpu_reset_sec, cpu); 854 } 855 } 856 857 env = firstenv; 858 859 /* Fixup Memory size on a alignment boundary */ 860 ram_size &= ~(RAM_SIZES_ALIGN - 1); 861 machine->ram_size = ram_size; 862 863 /* Register Memory */ 864 memory_region_allocate_system_memory(ram, NULL, "mpc8544ds.ram", ram_size); 865 memory_region_add_subregion(address_space_mem, 0, ram); 866 867 dev = qdev_create(NULL, "e500-ccsr"); 868 object_property_add_child(qdev_get_machine(), "e500-ccsr", 869 OBJECT(dev), NULL); 870 qdev_init_nofail(dev); 871 ccsr = CCSR(dev); 872 ccsr_addr_space = &ccsr->ccsr_space; 873 memory_region_add_subregion(address_space_mem, pmc->ccsrbar_base, 874 ccsr_addr_space); 875 876 mpicdev = ppce500_init_mpic(pms, ccsr_addr_space, irqs); 877 878 /* Serial */ 879 if (serial_hd(0)) { 880 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL0_REGS_OFFSET, 881 0, qdev_get_gpio_in(mpicdev, 42), 399193, 882 serial_hd(0), DEVICE_BIG_ENDIAN); 883 } 884 885 if (serial_hd(1)) { 886 serial_mm_init(ccsr_addr_space, MPC8544_SERIAL1_REGS_OFFSET, 887 0, qdev_get_gpio_in(mpicdev, 42), 399193, 888 serial_hd(1), DEVICE_BIG_ENDIAN); 889 } 890 891 /* General Utility device */ 892 dev = qdev_create(NULL, "mpc8544-guts"); 893 qdev_init_nofail(dev); 894 s = SYS_BUS_DEVICE(dev); 895 memory_region_add_subregion(ccsr_addr_space, MPC8544_UTIL_OFFSET, 896 sysbus_mmio_get_region(s, 0)); 897 898 /* PCI */ 899 dev = qdev_create(NULL, "e500-pcihost"); 900 object_property_add_child(qdev_get_machine(), "pci-host", OBJECT(dev), 901 &error_abort); 902 qdev_prop_set_uint32(dev, "first_slot", pmc->pci_first_slot); 903 qdev_prop_set_uint32(dev, "first_pin_irq", pci_irq_nrs[0]); 904 qdev_init_nofail(dev); 905 s = SYS_BUS_DEVICE(dev); 906 for (i = 0; i < PCI_NUM_PINS; i++) { 907 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, pci_irq_nrs[i])); 908 } 909 910 memory_region_add_subregion(ccsr_addr_space, MPC8544_PCI_REGS_OFFSET, 911 sysbus_mmio_get_region(s, 0)); 912 913 pci_bus = (PCIBus *)qdev_get_child_bus(dev, "pci.0"); 914 if (!pci_bus) 915 printf("couldn't create PCI controller!\n"); 916 917 if (pci_bus) { 918 /* Register network interfaces. */ 919 for (i = 0; i < nb_nics; i++) { 920 pci_nic_init_nofail(&nd_table[i], pci_bus, "virtio-net-pci", NULL); 921 } 922 } 923 924 /* Register spinning region */ 925 sysbus_create_simple("e500-spin", pmc->spin_base, NULL); 926 927 if (pmc->has_mpc8xxx_gpio) { 928 qemu_irq poweroff_irq; 929 930 dev = qdev_create(NULL, "mpc8xxx_gpio"); 931 s = SYS_BUS_DEVICE(dev); 932 qdev_init_nofail(dev); 933 sysbus_connect_irq(s, 0, qdev_get_gpio_in(mpicdev, MPC8XXX_GPIO_IRQ)); 934 memory_region_add_subregion(ccsr_addr_space, MPC8XXX_GPIO_OFFSET, 935 sysbus_mmio_get_region(s, 0)); 936 937 /* Power Off GPIO at Pin 0 */ 938 poweroff_irq = qemu_allocate_irq(ppce500_power_off, NULL, 0); 939 qdev_connect_gpio_out(dev, 0, poweroff_irq); 940 } 941 942 /* Platform Bus Device */ 943 if (pmc->has_platform_bus) { 944 dev = qdev_create(NULL, TYPE_PLATFORM_BUS_DEVICE); 945 dev->id = TYPE_PLATFORM_BUS_DEVICE; 946 qdev_prop_set_uint32(dev, "num_irqs", pmc->platform_bus_num_irqs); 947 qdev_prop_set_uint32(dev, "mmio_size", pmc->platform_bus_size); 948 qdev_init_nofail(dev); 949 pms->pbus_dev = PLATFORM_BUS_DEVICE(dev); 950 951 s = SYS_BUS_DEVICE(pms->pbus_dev); 952 for (i = 0; i < pmc->platform_bus_num_irqs; i++) { 953 int irqn = pmc->platform_bus_first_irq + i; 954 sysbus_connect_irq(s, i, qdev_get_gpio_in(mpicdev, irqn)); 955 } 956 957 memory_region_add_subregion(address_space_mem, 958 pmc->platform_bus_base, 959 sysbus_mmio_get_region(s, 0)); 960 } 961 962 /* 963 * Smart firmware defaults ahead! 964 * 965 * We follow the following table to select which payload we execute. 966 * 967 * -kernel | -bios | payload 968 * ---------+-------+--------- 969 * N | Y | u-boot 970 * N | N | u-boot 971 * Y | Y | u-boot 972 * Y | N | kernel 973 * 974 * This ensures backwards compatibility with how we used to expose 975 * -kernel to users but allows them to run through u-boot as well. 976 */ 977 kernel_as_payload = false; 978 if (bios_name == NULL) { 979 if (machine->kernel_filename) { 980 payload_name = machine->kernel_filename; 981 kernel_as_payload = true; 982 } else { 983 payload_name = "u-boot.e500"; 984 } 985 } else { 986 payload_name = bios_name; 987 } 988 989 filename = qemu_find_file(QEMU_FILE_TYPE_BIOS, payload_name); 990 991 payload_size = load_elf(filename, NULL, NULL, &bios_entry, &loadaddr, NULL, 992 1, PPC_ELF_MACHINE, 0, 0); 993 if (payload_size < 0) { 994 /* 995 * Hrm. No ELF image? Try a uImage, maybe someone is giving us an 996 * ePAPR compliant kernel 997 */ 998 loadaddr = LOAD_UIMAGE_LOADADDR_INVALID; 999 payload_size = load_uimage(filename, &bios_entry, &loadaddr, NULL, 1000 NULL, NULL); 1001 if (payload_size < 0) { 1002 error_report("could not load firmware '%s'", filename); 1003 exit(1); 1004 } 1005 } 1006 1007 g_free(filename); 1008 1009 if (kernel_as_payload) { 1010 kernel_base = loadaddr; 1011 kernel_size = payload_size; 1012 } 1013 1014 cur_base = loadaddr + payload_size; 1015 if (cur_base < 32 * MiB) { 1016 /* u-boot occupies memory up to 32MB, so load blobs above */ 1017 cur_base = 32 * MiB; 1018 } 1019 1020 /* Load bare kernel only if no bios/u-boot has been provided */ 1021 if (machine->kernel_filename && !kernel_as_payload) { 1022 kernel_base = cur_base; 1023 kernel_size = load_image_targphys(machine->kernel_filename, 1024 cur_base, 1025 ram_size - cur_base); 1026 if (kernel_size < 0) { 1027 error_report("could not load kernel '%s'", 1028 machine->kernel_filename); 1029 exit(1); 1030 } 1031 1032 cur_base += kernel_size; 1033 } 1034 1035 /* Load initrd. */ 1036 if (machine->initrd_filename) { 1037 initrd_base = (cur_base + INITRD_LOAD_PAD) & ~INITRD_PAD_MASK; 1038 initrd_size = load_image_targphys(machine->initrd_filename, initrd_base, 1039 ram_size - initrd_base); 1040 1041 if (initrd_size < 0) { 1042 error_report("could not load initial ram disk '%s'", 1043 machine->initrd_filename); 1044 exit(1); 1045 } 1046 1047 cur_base = initrd_base + initrd_size; 1048 } 1049 1050 /* 1051 * Reserve space for dtb behind the kernel image because Linux has a bug 1052 * where it can only handle the dtb if it's within the first 64MB of where 1053 * <kernel> starts. dtb cannot not reach initrd_base because INITRD_LOAD_PAD 1054 * ensures enough space between kernel and initrd. 1055 */ 1056 dt_base = (loadaddr + payload_size + DTC_LOAD_PAD) & ~DTC_PAD_MASK; 1057 if (dt_base + DTB_MAX_SIZE > ram_size) { 1058 error_report("not enough memory for device tree"); 1059 exit(1); 1060 } 1061 1062 dt_size = ppce500_prep_device_tree(pms, dt_base, 1063 initrd_base, initrd_size, 1064 kernel_base, kernel_size); 1065 if (dt_size < 0) { 1066 error_report("couldn't load device tree"); 1067 exit(1); 1068 } 1069 assert(dt_size < DTB_MAX_SIZE); 1070 1071 boot_info = env->load_info; 1072 boot_info->entry = bios_entry; 1073 boot_info->dt_base = dt_base; 1074 boot_info->dt_size = dt_size; 1075 } 1076 1077 static void e500_ccsr_initfn(Object *obj) 1078 { 1079 PPCE500CCSRState *ccsr = CCSR(obj); 1080 memory_region_init(&ccsr->ccsr_space, obj, "e500-ccsr", 1081 MPC8544_CCSRBAR_SIZE); 1082 } 1083 1084 static const TypeInfo e500_ccsr_info = { 1085 .name = TYPE_CCSR, 1086 .parent = TYPE_SYS_BUS_DEVICE, 1087 .instance_size = sizeof(PPCE500CCSRState), 1088 .instance_init = e500_ccsr_initfn, 1089 }; 1090 1091 static const TypeInfo ppce500_info = { 1092 .name = TYPE_PPCE500_MACHINE, 1093 .parent = TYPE_MACHINE, 1094 .abstract = true, 1095 .instance_size = sizeof(PPCE500MachineState), 1096 .class_size = sizeof(PPCE500MachineClass), 1097 }; 1098 1099 static void e500_register_types(void) 1100 { 1101 type_register_static(&e500_ccsr_info); 1102 type_register_static(&ppce500_info); 1103 } 1104 1105 type_init(e500_register_types) 1106