1 /* 2 * pcie.c 3 * 4 * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp> 5 * VA Linux Systems Japan K.K. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "hw/pci/pci_bridge.h" 24 #include "hw/pci/pcie.h" 25 #include "hw/pci/msix.h" 26 #include "hw/pci/msi.h" 27 #include "hw/pci/pci_bus.h" 28 #include "hw/pci/pcie_regs.h" 29 #include "hw/pci/pcie_port.h" 30 #include "qemu/range.h" 31 32 //#define DEBUG_PCIE 33 #ifdef DEBUG_PCIE 34 # define PCIE_DPRINTF(fmt, ...) \ 35 fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__) 36 #else 37 # define PCIE_DPRINTF(fmt, ...) do {} while (0) 38 #endif 39 #define PCIE_DEV_PRINTF(dev, fmt, ...) \ 40 PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__) 41 42 43 /*************************************************************************** 44 * pci express capability helper functions 45 */ 46 47 static void 48 pcie_cap_v1_fill(PCIDevice *dev, uint8_t port, uint8_t type, uint8_t version) 49 { 50 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 51 uint8_t *cmask = dev->cmask + dev->exp.exp_cap; 52 53 /* capability register 54 interrupt message number defaults to 0 */ 55 pci_set_word(exp_cap + PCI_EXP_FLAGS, 56 ((type << PCI_EXP_FLAGS_TYPE_SHIFT) & PCI_EXP_FLAGS_TYPE) | 57 version); 58 59 /* device capability register 60 * table 7-12: 61 * roll based error reporting bit must be set by all 62 * Functions conforming to the ECN, PCI Express Base 63 * Specification, Revision 1.1., or subsequent PCI Express Base 64 * Specification revisions. 65 */ 66 pci_set_long(exp_cap + PCI_EXP_DEVCAP, PCI_EXP_DEVCAP_RBER); 67 68 pci_set_long(exp_cap + PCI_EXP_LNKCAP, 69 (port << PCI_EXP_LNKCAP_PN_SHIFT) | 70 PCI_EXP_LNKCAP_ASPMS_0S | 71 QEMU_PCI_EXP_LNKCAP_MLW(QEMU_PCI_EXP_LNK_X1) | 72 QEMU_PCI_EXP_LNKCAP_MLS(QEMU_PCI_EXP_LNK_2_5GT)); 73 74 pci_set_word(exp_cap + PCI_EXP_LNKSTA, 75 QEMU_PCI_EXP_LNKSTA_NLW(QEMU_PCI_EXP_LNK_X1) | 76 QEMU_PCI_EXP_LNKSTA_CLS(QEMU_PCI_EXP_LNK_2_5GT)); 77 78 /* We changed link status bits over time, and changing them across 79 * migrations is generally fine as hardware changes them too. 80 * Let's not bother checking. 81 */ 82 pci_set_word(cmask + PCI_EXP_LNKSTA, 0); 83 } 84 85 static void pcie_cap_fill_slot_lnk(PCIDevice *dev) 86 { 87 PCIESlot *s = (PCIESlot *)object_dynamic_cast(OBJECT(dev), TYPE_PCIE_SLOT); 88 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 89 90 /* Skip anything that isn't a PCIESlot */ 91 if (!s) { 92 return; 93 } 94 95 /* Clear and fill LNKCAP from what was configured above */ 96 pci_long_test_and_clear_mask(exp_cap + PCI_EXP_LNKCAP, 97 PCI_EXP_LNKCAP_MLW | PCI_EXP_LNKCAP_SLS); 98 pci_long_test_and_set_mask(exp_cap + PCI_EXP_LNKCAP, 99 QEMU_PCI_EXP_LNKCAP_MLW(s->width) | 100 QEMU_PCI_EXP_LNKCAP_MLS(s->speed)); 101 102 /* 103 * Link bandwidth notification is required for all root ports and 104 * downstream ports supporting links wider than x1 or multiple link 105 * speeds. 106 */ 107 if (s->width > QEMU_PCI_EXP_LNK_X1 || 108 s->speed > QEMU_PCI_EXP_LNK_2_5GT) { 109 pci_long_test_and_set_mask(exp_cap + PCI_EXP_LNKCAP, 110 PCI_EXP_LNKCAP_LBNC); 111 } 112 113 if (s->speed > QEMU_PCI_EXP_LNK_2_5GT) { 114 /* 115 * Hot-plug capable downstream ports and downstream ports supporting 116 * link speeds greater than 5GT/s must hardwire PCI_EXP_LNKCAP_DLLLARC 117 * to 1b. PCI_EXP_LNKCAP_DLLLARC implies PCI_EXP_LNKSTA_DLLLA, which 118 * we also hardwire to 1b here. 2.5GT/s hot-plug slots should also 119 * technically implement this, but it's not done here for compatibility. 120 */ 121 pci_long_test_and_set_mask(exp_cap + PCI_EXP_LNKCAP, 122 PCI_EXP_LNKCAP_DLLLARC); 123 /* the PCI_EXP_LNKSTA_DLLLA will be set in the hotplug function */ 124 125 /* 126 * Target Link Speed defaults to the highest link speed supported by 127 * the component. 2.5GT/s devices are permitted to hardwire to zero. 128 */ 129 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_LNKCTL2, 130 PCI_EXP_LNKCTL2_TLS); 131 pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKCTL2, 132 QEMU_PCI_EXP_LNKCAP_MLS(s->speed) & 133 PCI_EXP_LNKCTL2_TLS); 134 } 135 136 /* 137 * 2.5 & 5.0GT/s can be fully described by LNKCAP, but 8.0GT/s is 138 * actually a reference to the highest bit supported in this register. 139 * We assume the device supports all link speeds. 140 */ 141 if (s->speed > QEMU_PCI_EXP_LNK_5GT) { 142 pci_long_test_and_clear_mask(exp_cap + PCI_EXP_LNKCAP2, ~0U); 143 pci_long_test_and_set_mask(exp_cap + PCI_EXP_LNKCAP2, 144 PCI_EXP_LNKCAP2_SLS_2_5GB | 145 PCI_EXP_LNKCAP2_SLS_5_0GB | 146 PCI_EXP_LNKCAP2_SLS_8_0GB); 147 if (s->speed > QEMU_PCI_EXP_LNK_8GT) { 148 pci_long_test_and_set_mask(exp_cap + PCI_EXP_LNKCAP2, 149 PCI_EXP_LNKCAP2_SLS_16_0GB); 150 } 151 } 152 } 153 154 int pcie_cap_init(PCIDevice *dev, uint8_t offset, 155 uint8_t type, uint8_t port, 156 Error **errp) 157 { 158 /* PCIe cap v2 init */ 159 int pos; 160 uint8_t *exp_cap; 161 162 assert(pci_is_express(dev)); 163 164 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset, 165 PCI_EXP_VER2_SIZEOF, errp); 166 if (pos < 0) { 167 return pos; 168 } 169 dev->exp.exp_cap = pos; 170 exp_cap = dev->config + pos; 171 172 /* Filling values common with v1 */ 173 pcie_cap_v1_fill(dev, port, type, PCI_EXP_FLAGS_VER2); 174 175 /* Fill link speed and width options */ 176 pcie_cap_fill_slot_lnk(dev); 177 178 /* Filling v2 specific values */ 179 pci_set_long(exp_cap + PCI_EXP_DEVCAP2, 180 PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP); 181 182 pci_set_word(dev->wmask + pos + PCI_EXP_DEVCTL2, PCI_EXP_DEVCTL2_EETLPPB); 183 184 if (dev->cap_present & QEMU_PCIE_EXTCAP_INIT) { 185 /* read-only to behave like a 'NULL' Extended Capability Header */ 186 pci_set_long(dev->wmask + PCI_CONFIG_SPACE_SIZE, 0); 187 } 188 189 return pos; 190 } 191 192 int pcie_cap_v1_init(PCIDevice *dev, uint8_t offset, uint8_t type, 193 uint8_t port) 194 { 195 /* PCIe cap v1 init */ 196 int pos; 197 Error *local_err = NULL; 198 199 assert(pci_is_express(dev)); 200 201 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset, 202 PCI_EXP_VER1_SIZEOF, &local_err); 203 if (pos < 0) { 204 error_report_err(local_err); 205 return pos; 206 } 207 dev->exp.exp_cap = pos; 208 209 pcie_cap_v1_fill(dev, port, type, PCI_EXP_FLAGS_VER1); 210 211 return pos; 212 } 213 214 static int 215 pcie_endpoint_cap_common_init(PCIDevice *dev, uint8_t offset, uint8_t cap_size) 216 { 217 uint8_t type = PCI_EXP_TYPE_ENDPOINT; 218 Error *local_err = NULL; 219 int ret; 220 221 /* 222 * Windows guests will report Code 10, device cannot start, if 223 * a regular Endpoint type is exposed on a root complex. These 224 * should instead be Root Complex Integrated Endpoints. 225 */ 226 if (pci_bus_is_express(pci_get_bus(dev)) 227 && pci_bus_is_root(pci_get_bus(dev))) { 228 type = PCI_EXP_TYPE_RC_END; 229 } 230 231 if (cap_size == PCI_EXP_VER1_SIZEOF) { 232 return pcie_cap_v1_init(dev, offset, type, 0); 233 } else { 234 ret = pcie_cap_init(dev, offset, type, 0, &local_err); 235 236 if (ret < 0) { 237 error_report_err(local_err); 238 } 239 240 return ret; 241 } 242 } 243 244 int pcie_endpoint_cap_init(PCIDevice *dev, uint8_t offset) 245 { 246 return pcie_endpoint_cap_common_init(dev, offset, PCI_EXP_VER2_SIZEOF); 247 } 248 249 int pcie_endpoint_cap_v1_init(PCIDevice *dev, uint8_t offset) 250 { 251 return pcie_endpoint_cap_common_init(dev, offset, PCI_EXP_VER1_SIZEOF); 252 } 253 254 void pcie_cap_exit(PCIDevice *dev) 255 { 256 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER2_SIZEOF); 257 } 258 259 void pcie_cap_v1_exit(PCIDevice *dev) 260 { 261 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER1_SIZEOF); 262 } 263 264 uint8_t pcie_cap_get_type(const PCIDevice *dev) 265 { 266 uint32_t pos = dev->exp.exp_cap; 267 assert(pos > 0); 268 return (pci_get_word(dev->config + pos + PCI_EXP_FLAGS) & 269 PCI_EXP_FLAGS_TYPE) >> PCI_EXP_FLAGS_TYPE_SHIFT; 270 } 271 272 /* MSI/MSI-X */ 273 /* pci express interrupt message number */ 274 /* 7.8.2 PCI Express Capabilities Register: Interrupt Message Number */ 275 void pcie_cap_flags_set_vector(PCIDevice *dev, uint8_t vector) 276 { 277 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 278 assert(vector < 32); 279 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_FLAGS, PCI_EXP_FLAGS_IRQ); 280 pci_word_test_and_set_mask(exp_cap + PCI_EXP_FLAGS, 281 vector << PCI_EXP_FLAGS_IRQ_SHIFT); 282 } 283 284 uint8_t pcie_cap_flags_get_vector(PCIDevice *dev) 285 { 286 return (pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_FLAGS) & 287 PCI_EXP_FLAGS_IRQ) >> PCI_EXP_FLAGS_IRQ_SHIFT; 288 } 289 290 void pcie_cap_deverr_init(PCIDevice *dev) 291 { 292 uint32_t pos = dev->exp.exp_cap; 293 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP, 294 PCI_EXP_DEVCAP_RBER); 295 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL, 296 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 297 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 298 pci_long_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_DEVSTA, 299 PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED | 300 PCI_EXP_DEVSTA_FED | PCI_EXP_DEVSTA_URD); 301 } 302 303 void pcie_cap_deverr_reset(PCIDevice *dev) 304 { 305 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 306 pci_long_test_and_clear_mask(devctl, 307 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 308 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 309 } 310 311 void pcie_cap_lnkctl_init(PCIDevice *dev) 312 { 313 uint32_t pos = dev->exp.exp_cap; 314 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_LNKCTL, 315 PCI_EXP_LNKCTL_CCC | PCI_EXP_LNKCTL_ES); 316 } 317 318 void pcie_cap_lnkctl_reset(PCIDevice *dev) 319 { 320 uint8_t *lnkctl = dev->config + dev->exp.exp_cap + PCI_EXP_LNKCTL; 321 pci_long_test_and_clear_mask(lnkctl, 322 PCI_EXP_LNKCTL_CCC | PCI_EXP_LNKCTL_ES); 323 } 324 325 static void hotplug_event_update_event_status(PCIDevice *dev) 326 { 327 uint32_t pos = dev->exp.exp_cap; 328 uint8_t *exp_cap = dev->config + pos; 329 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 330 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 331 332 dev->exp.hpev_notified = (sltctl & PCI_EXP_SLTCTL_HPIE) && 333 (sltsta & sltctl & PCI_EXP_HP_EV_SUPPORTED); 334 } 335 336 static void hotplug_event_notify(PCIDevice *dev) 337 { 338 bool prev = dev->exp.hpev_notified; 339 340 hotplug_event_update_event_status(dev); 341 342 if (prev == dev->exp.hpev_notified) { 343 return; 344 } 345 346 /* Note: the logic above does not take into account whether interrupts 347 * are masked. The result is that interrupt will be sent when it is 348 * subsequently unmasked. This appears to be legal: Section 6.7.3.4: 349 * The Port may optionally send an MSI when there are hot-plug events that 350 * occur while interrupt generation is disabled, and interrupt generation is 351 * subsequently enabled. */ 352 if (msix_enabled(dev)) { 353 msix_notify(dev, pcie_cap_flags_get_vector(dev)); 354 } else if (msi_enabled(dev)) { 355 msi_notify(dev, pcie_cap_flags_get_vector(dev)); 356 } else if (pci_intx(dev) != -1) { 357 pci_set_irq(dev, dev->exp.hpev_notified); 358 } 359 } 360 361 static void hotplug_event_clear(PCIDevice *dev) 362 { 363 hotplug_event_update_event_status(dev); 364 if (!msix_enabled(dev) && !msi_enabled(dev) && pci_intx(dev) != -1 && 365 !dev->exp.hpev_notified) { 366 pci_irq_deassert(dev); 367 } 368 } 369 370 void pcie_cap_slot_enable_power(PCIDevice *dev) 371 { 372 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 373 uint32_t sltcap = pci_get_long(exp_cap + PCI_EXP_SLTCAP); 374 375 if (sltcap & PCI_EXP_SLTCAP_PCP) { 376 pci_set_word_by_mask(exp_cap + PCI_EXP_SLTCTL, 377 PCI_EXP_SLTCTL_PCC, PCI_EXP_SLTCTL_PWR_ON); 378 } 379 } 380 381 static void pcie_set_power_device(PCIBus *bus, PCIDevice *dev, void *opaque) 382 { 383 bool *power = opaque; 384 385 pci_set_power(dev, *power); 386 } 387 388 static void pcie_cap_update_power(PCIDevice *hotplug_dev) 389 { 390 uint8_t *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; 391 PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(hotplug_dev)); 392 uint32_t sltcap = pci_get_long(exp_cap + PCI_EXP_SLTCAP); 393 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 394 bool power = true; 395 396 if (sltcap & PCI_EXP_SLTCAP_PCP) { 397 power = (sltctl & PCI_EXP_SLTCTL_PCC) == PCI_EXP_SLTCTL_PWR_ON; 398 } 399 400 pci_for_each_device(sec_bus, pci_bus_num(sec_bus), 401 pcie_set_power_device, &power); 402 } 403 404 /* 405 * A PCI Express Hot-Plug Event has occurred, so update slot status register 406 * and notify OS of the event if necessary. 407 * 408 * 6.7.3 PCI Express Hot-Plug Events 409 * 6.7.3.4 Software Notification of Hot-Plug Events 410 */ 411 static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event) 412 { 413 /* Minor optimization: if nothing changed - no event is needed. */ 414 if (pci_word_test_and_set_mask(dev->config + dev->exp.exp_cap + 415 PCI_EXP_SLTSTA, event) == event) { 416 return; 417 } 418 hotplug_event_notify(dev); 419 } 420 421 static void pcie_cap_slot_plug_common(PCIDevice *hotplug_dev, DeviceState *dev, 422 Error **errp) 423 { 424 uint8_t *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; 425 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 426 427 PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: 0x%x\n", sltsta); 428 if (sltsta & PCI_EXP_SLTSTA_EIS) { 429 /* the slot is electromechanically locked. 430 * This error is propagated up to qdev and then to HMP/QMP. 431 */ 432 error_setg_errno(errp, EBUSY, "slot is electromechanically locked"); 433 } 434 } 435 436 void pcie_cap_slot_pre_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, 437 Error **errp) 438 { 439 PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev); 440 uint8_t *exp_cap = hotplug_pdev->config + hotplug_pdev->exp.exp_cap; 441 uint32_t sltcap = pci_get_word(exp_cap + PCI_EXP_SLTCAP); 442 443 /* Check if hot-plug is disabled on the slot */ 444 if (dev->hotplugged && (sltcap & PCI_EXP_SLTCAP_HPC) == 0) { 445 error_setg(errp, "Hot-plug failed: unsupported by the port device '%s'", 446 DEVICE(hotplug_pdev)->id); 447 return; 448 } 449 450 pcie_cap_slot_plug_common(PCI_DEVICE(hotplug_dev), dev, errp); 451 } 452 453 void pcie_cap_slot_plug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, 454 Error **errp) 455 { 456 PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev); 457 uint8_t *exp_cap = hotplug_pdev->config + hotplug_pdev->exp.exp_cap; 458 PCIDevice *pci_dev = PCI_DEVICE(dev); 459 uint32_t lnkcap = pci_get_long(exp_cap + PCI_EXP_LNKCAP); 460 461 if (pci_is_vf(pci_dev)) { 462 /* Virtual function cannot be physically disconnected */ 463 return; 464 } 465 466 /* Don't send event when device is enabled during qemu machine creation: 467 * it is present on boot, no hotplug event is necessary. We do send an 468 * event when the device is disabled later. */ 469 if (!dev->hotplugged) { 470 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 471 PCI_EXP_SLTSTA_PDS); 472 if (pci_dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA || 473 (lnkcap & PCI_EXP_LNKCAP_DLLLARC)) { 474 pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA, 475 PCI_EXP_LNKSTA_DLLLA); 476 } 477 pcie_cap_update_power(hotplug_pdev); 478 return; 479 } 480 481 /* To enable multifunction hot-plug, we just ensure the function 482 * 0 added last. When function 0 is added, we set the sltsta and 483 * inform OS via event notification. 484 */ 485 if (pci_get_function_0(pci_dev)) { 486 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 487 PCI_EXP_SLTSTA_PDS); 488 if (pci_dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA || 489 (lnkcap & PCI_EXP_LNKCAP_DLLLARC)) { 490 pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA, 491 PCI_EXP_LNKSTA_DLLLA); 492 } 493 pcie_cap_slot_event(hotplug_pdev, 494 PCI_EXP_HP_EV_PDC | PCI_EXP_HP_EV_ABP); 495 pcie_cap_update_power(hotplug_pdev); 496 } 497 } 498 499 void pcie_cap_slot_unplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, 500 Error **errp) 501 { 502 qdev_unrealize(dev); 503 } 504 505 static void pcie_unplug_device(PCIBus *bus, PCIDevice *dev, void *opaque) 506 { 507 HotplugHandler *hotplug_ctrl = qdev_get_hotplug_handler(DEVICE(dev)); 508 509 if (dev->partially_hotplugged) { 510 dev->qdev.pending_deleted_event = false; 511 return; 512 } 513 hotplug_handler_unplug(hotplug_ctrl, DEVICE(dev), &error_abort); 514 object_unparent(OBJECT(dev)); 515 } 516 517 static void pcie_cap_slot_do_unplug(PCIDevice *dev) 518 { 519 PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev)); 520 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 521 uint32_t lnkcap = pci_get_long(exp_cap + PCI_EXP_LNKCAP); 522 523 pci_for_each_device_under_bus(sec_bus, pcie_unplug_device, NULL); 524 525 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 526 PCI_EXP_SLTSTA_PDS); 527 if (dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA || 528 (lnkcap & PCI_EXP_LNKCAP_DLLLARC)) { 529 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_LNKSTA, 530 PCI_EXP_LNKSTA_DLLLA); 531 } 532 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 533 PCI_EXP_SLTSTA_PDC); 534 } 535 536 void pcie_cap_slot_unplug_request_cb(HotplugHandler *hotplug_dev, 537 DeviceState *dev, Error **errp) 538 { 539 Error *local_err = NULL; 540 PCIDevice *pci_dev = PCI_DEVICE(dev); 541 PCIBus *bus = pci_get_bus(pci_dev); 542 PCIDevice *hotplug_pdev = PCI_DEVICE(hotplug_dev); 543 uint8_t *exp_cap = hotplug_pdev->config + hotplug_pdev->exp.exp_cap; 544 uint32_t sltcap = pci_get_word(exp_cap + PCI_EXP_SLTCAP); 545 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 546 547 /* Check if hot-unplug is disabled on the slot */ 548 if ((sltcap & PCI_EXP_SLTCAP_HPC) == 0) { 549 error_setg(errp, "Hot-unplug failed: " 550 "unsupported by the port device '%s'", 551 DEVICE(hotplug_pdev)->id); 552 return; 553 } 554 555 pcie_cap_slot_plug_common(hotplug_pdev, dev, &local_err); 556 if (local_err) { 557 error_propagate(errp, local_err); 558 return; 559 } 560 561 if ((sltctl & PCI_EXP_SLTCTL_PIC) == PCI_EXP_SLTCTL_PWR_IND_BLINK) { 562 error_setg(errp, "Hot-unplug failed: " 563 "guest is busy (power indicator blinking)"); 564 return; 565 } 566 567 dev->pending_deleted_event = true; 568 dev->pending_deleted_expires_ms = 569 qemu_clock_get_ms(QEMU_CLOCK_VIRTUAL) + 5000; /* 5 secs */ 570 571 /* In case user cancel the operation of multi-function hot-add, 572 * remove the function that is unexposed to guest individually, 573 * without interaction with guest. 574 */ 575 if (pci_dev->devfn && 576 !bus->devices[0]) { 577 pcie_unplug_device(bus, pci_dev, NULL); 578 579 return; 580 } 581 582 if (((sltctl & PCI_EXP_SLTCTL_PIC) == PCI_EXP_SLTCTL_PWR_IND_OFF) && 583 ((sltctl & PCI_EXP_SLTCTL_PCC) == PCI_EXP_SLTCTL_PWR_OFF)) { 584 /* slot is powered off -> unplug without round-trip to the guest */ 585 pcie_cap_slot_do_unplug(hotplug_pdev); 586 hotplug_event_notify(hotplug_pdev); 587 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 588 PCI_EXP_SLTSTA_ABP); 589 return; 590 } 591 592 pcie_cap_slot_push_attention_button(hotplug_pdev); 593 } 594 595 /* pci express slot for pci express root/downstream port 596 PCI express capability slot registers */ 597 void pcie_cap_slot_init(PCIDevice *dev, PCIESlot *s) 598 { 599 uint32_t pos = dev->exp.exp_cap; 600 601 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_FLAGS, 602 PCI_EXP_FLAGS_SLOT); 603 604 pci_long_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCAP, 605 ~PCI_EXP_SLTCAP_PSN); 606 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 607 (s->slot << PCI_EXP_SLTCAP_PSN_SHIFT) | 608 PCI_EXP_SLTCAP_EIP | 609 PCI_EXP_SLTCAP_PIP | 610 PCI_EXP_SLTCAP_AIP | 611 PCI_EXP_SLTCAP_ABP); 612 613 /* 614 * Expose native hot-plug on all bridges if hot-plug is enabled on the slot. 615 * (unless broken 6.1 ABI is enforced for compat reasons) 616 */ 617 if (s->hotplug && 618 (!s->hide_native_hotplug_cap || DEVICE(dev)->hotplugged)) { 619 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 620 PCI_EXP_SLTCAP_HPS | 621 PCI_EXP_SLTCAP_HPC); 622 } 623 624 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 625 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 626 PCI_EXP_SLTCAP_PCP); 627 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 628 PCI_EXP_SLTCTL_PCC); 629 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 630 PCI_EXP_SLTCTL_PCC); 631 } 632 633 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 634 PCI_EXP_SLTCTL_PIC | 635 PCI_EXP_SLTCTL_AIC); 636 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCTL, 637 PCI_EXP_SLTCTL_PIC_OFF | 638 PCI_EXP_SLTCTL_AIC_OFF); 639 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 640 PCI_EXP_SLTCTL_PIC | 641 PCI_EXP_SLTCTL_AIC | 642 PCI_EXP_SLTCTL_HPIE | 643 PCI_EXP_SLTCTL_CCIE | 644 PCI_EXP_SLTCTL_PDCE | 645 PCI_EXP_SLTCTL_ABPE); 646 /* Although reading PCI_EXP_SLTCTL_EIC returns always 0, 647 * make the bit writable here in order to detect 1b is written. 648 * pcie_cap_slot_write_config() test-and-clear the bit, so 649 * this bit always returns 0 to the guest. 650 */ 651 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 652 PCI_EXP_SLTCTL_EIC); 653 654 pci_word_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_SLTSTA, 655 PCI_EXP_HP_EV_SUPPORTED); 656 657 dev->exp.hpev_notified = false; 658 659 qbus_set_hotplug_handler(BUS(pci_bridge_get_sec_bus(PCI_BRIDGE(dev))), 660 OBJECT(dev)); 661 } 662 663 void pcie_cap_slot_reset(PCIDevice *dev) 664 { 665 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 666 uint8_t port_type = pcie_cap_get_type(dev); 667 668 assert(port_type == PCI_EXP_TYPE_DOWNSTREAM || 669 port_type == PCI_EXP_TYPE_ROOT_PORT); 670 671 PCIE_DEV_PRINTF(dev, "reset\n"); 672 673 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 674 PCI_EXP_SLTCTL_EIC | 675 PCI_EXP_SLTCTL_PIC | 676 PCI_EXP_SLTCTL_AIC | 677 PCI_EXP_SLTCTL_HPIE | 678 PCI_EXP_SLTCTL_CCIE | 679 PCI_EXP_SLTCTL_PDCE | 680 PCI_EXP_SLTCTL_ABPE); 681 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 682 PCI_EXP_SLTCTL_AIC_OFF); 683 684 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 685 /* Downstream ports enforce device number 0. */ 686 bool populated = pci_bridge_get_sec_bus(PCI_BRIDGE(dev))->devices[0]; 687 uint16_t pic; 688 689 if (populated) { 690 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 691 PCI_EXP_SLTCTL_PCC); 692 } else { 693 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 694 PCI_EXP_SLTCTL_PCC); 695 } 696 697 pic = populated ? PCI_EXP_SLTCTL_PIC_ON : PCI_EXP_SLTCTL_PIC_OFF; 698 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, pic); 699 } 700 701 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 702 PCI_EXP_SLTSTA_EIS |/* on reset, 703 the lock is released */ 704 PCI_EXP_SLTSTA_CC | 705 PCI_EXP_SLTSTA_PDC | 706 PCI_EXP_SLTSTA_ABP); 707 708 pcie_cap_update_power(dev); 709 hotplug_event_update_event_status(dev); 710 } 711 712 void pcie_cap_slot_get(PCIDevice *dev, uint16_t *slt_ctl, uint16_t *slt_sta) 713 { 714 uint32_t pos = dev->exp.exp_cap; 715 uint8_t *exp_cap = dev->config + pos; 716 *slt_ctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 717 *slt_sta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 718 } 719 720 void pcie_cap_slot_write_config(PCIDevice *dev, 721 uint16_t old_slt_ctl, uint16_t old_slt_sta, 722 uint32_t addr, uint32_t val, int len) 723 { 724 uint32_t pos = dev->exp.exp_cap; 725 uint8_t *exp_cap = dev->config + pos; 726 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 727 728 if (ranges_overlap(addr, len, pos + PCI_EXP_SLTSTA, 2)) { 729 /* 730 * Guests tend to clears all bits during init. 731 * If they clear bits that weren't set this is racy and will lose events: 732 * not a big problem for manual button presses, but a problem for us. 733 * As a work-around, detect this and revert status to what it was 734 * before the write. 735 * 736 * Note: in theory this can be detected as a duplicate button press 737 * which cancels the previous press. Does not seem to happen in 738 * practice as guests seem to only have this bug during init. 739 */ 740 #define PCIE_SLOT_EVENTS (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD | \ 741 PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC | \ 742 PCI_EXP_SLTSTA_CC) 743 744 if (val & ~old_slt_sta & PCIE_SLOT_EVENTS) { 745 sltsta = (sltsta & ~PCIE_SLOT_EVENTS) | (old_slt_sta & PCIE_SLOT_EVENTS); 746 pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta); 747 } 748 hotplug_event_clear(dev); 749 } 750 751 if (!ranges_overlap(addr, len, pos + PCI_EXP_SLTCTL, 2)) { 752 return; 753 } 754 755 if (pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 756 PCI_EXP_SLTCTL_EIC)) { 757 sltsta ^= PCI_EXP_SLTSTA_EIS; /* toggle PCI_EXP_SLTSTA_EIS bit */ 758 pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta); 759 PCIE_DEV_PRINTF(dev, "PCI_EXP_SLTCTL_EIC: " 760 "sltsta -> 0x%02"PRIx16"\n", 761 sltsta); 762 } 763 764 /* 765 * If the slot is populated, power indicator is off and power 766 * controller is off, it is safe to detach the devices. 767 * 768 * Note: don't detach if condition was already true: 769 * this is a work around for guests that overwrite 770 * control of powered off slots before powering them on. 771 */ 772 if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) && 773 (val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF && 774 (!(old_slt_ctl & PCI_EXP_SLTCTL_PCC) || 775 (old_slt_ctl & PCI_EXP_SLTCTL_PIC_OFF) != PCI_EXP_SLTCTL_PIC_OFF)) { 776 pcie_cap_slot_do_unplug(dev); 777 } 778 pcie_cap_update_power(dev); 779 780 hotplug_event_notify(dev); 781 782 /* 783 * 6.7.3.2 Command Completed Events 784 * 785 * Software issues a command to a hot-plug capable Downstream Port by 786 * issuing a write transaction that targets any portion of the Port’s Slot 787 * Control register. A single write to the Slot Control register is 788 * considered to be a single command, even if the write affects more than 789 * one field in the Slot Control register. In response to this transaction, 790 * the Port must carry out the requested actions and then set the 791 * associated status field for the command completed event. */ 792 793 /* Real hardware might take a while to complete requested command because 794 * physical movement would be involved like locking the electromechanical 795 * lock. However in our case, command is completed instantaneously above, 796 * so send a command completion event right now. 797 */ 798 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_CCI); 799 } 800 801 int pcie_cap_slot_post_load(void *opaque, int version_id) 802 { 803 PCIDevice *dev = opaque; 804 hotplug_event_update_event_status(dev); 805 pcie_cap_update_power(dev); 806 return 0; 807 } 808 809 void pcie_cap_slot_push_attention_button(PCIDevice *dev) 810 { 811 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_ABP); 812 } 813 814 /* root control/capabilities/status. PME isn't emulated for now */ 815 void pcie_cap_root_init(PCIDevice *dev) 816 { 817 pci_set_word(dev->wmask + dev->exp.exp_cap + PCI_EXP_RTCTL, 818 PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | 819 PCI_EXP_RTCTL_SEFEE); 820 } 821 822 void pcie_cap_root_reset(PCIDevice *dev) 823 { 824 pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0); 825 } 826 827 /* function level reset(FLR) */ 828 void pcie_cap_flr_init(PCIDevice *dev) 829 { 830 pci_long_test_and_set_mask(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP, 831 PCI_EXP_DEVCAP_FLR); 832 833 /* Although reading BCR_FLR returns always 0, 834 * the bit is made writable here in order to detect the 1b is written 835 * pcie_cap_flr_write_config() test-and-clear the bit, so 836 * this bit always returns 0 to the guest. 837 */ 838 pci_word_test_and_set_mask(dev->wmask + dev->exp.exp_cap + PCI_EXP_DEVCTL, 839 PCI_EXP_DEVCTL_BCR_FLR); 840 } 841 842 void pcie_cap_flr_write_config(PCIDevice *dev, 843 uint32_t addr, uint32_t val, int len) 844 { 845 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 846 if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) { 847 /* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler 848 so the handler can detect FLR by looking at this bit. */ 849 pci_device_reset(dev); 850 pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR); 851 } 852 } 853 854 /* Alternative Routing-ID Interpretation (ARI) 855 * forwarding support for root and downstream ports 856 */ 857 void pcie_cap_arifwd_init(PCIDevice *dev) 858 { 859 uint32_t pos = dev->exp.exp_cap; 860 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP2, 861 PCI_EXP_DEVCAP2_ARI); 862 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL2, 863 PCI_EXP_DEVCTL2_ARI); 864 } 865 866 void pcie_cap_arifwd_reset(PCIDevice *dev) 867 { 868 uint8_t *devctl2 = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2; 869 pci_long_test_and_clear_mask(devctl2, PCI_EXP_DEVCTL2_ARI); 870 } 871 872 bool pcie_cap_is_arifwd_enabled(const PCIDevice *dev) 873 { 874 if (!pci_is_express(dev)) { 875 return false; 876 } 877 if (!dev->exp.exp_cap) { 878 return false; 879 } 880 881 return pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2) & 882 PCI_EXP_DEVCTL2_ARI; 883 } 884 885 /************************************************************************** 886 * pci express extended capability list management functions 887 * uint16_t ext_cap_id (16 bit) 888 * uint8_t cap_ver (4 bit) 889 * uint16_t cap_offset (12 bit) 890 * uint16_t ext_cap_size 891 */ 892 893 /* Passing a cap_id value > 0xffff will return 0 and put end of list in prev */ 894 static uint16_t pcie_find_capability_list(PCIDevice *dev, uint32_t cap_id, 895 uint16_t *prev_p) 896 { 897 uint16_t prev = 0; 898 uint16_t next; 899 uint32_t header = pci_get_long(dev->config + PCI_CONFIG_SPACE_SIZE); 900 901 if (!header) { 902 /* no extended capability */ 903 next = 0; 904 goto out; 905 } 906 for (next = PCI_CONFIG_SPACE_SIZE; next; 907 prev = next, next = PCI_EXT_CAP_NEXT(header)) { 908 909 assert(next >= PCI_CONFIG_SPACE_SIZE); 910 assert(next <= PCIE_CONFIG_SPACE_SIZE - 8); 911 912 header = pci_get_long(dev->config + next); 913 if (PCI_EXT_CAP_ID(header) == cap_id) { 914 break; 915 } 916 } 917 918 out: 919 if (prev_p) { 920 *prev_p = prev; 921 } 922 return next; 923 } 924 925 uint16_t pcie_find_capability(PCIDevice *dev, uint16_t cap_id) 926 { 927 return pcie_find_capability_list(dev, cap_id, NULL); 928 } 929 930 static void pcie_ext_cap_set_next(PCIDevice *dev, uint16_t pos, uint16_t next) 931 { 932 uint32_t header = pci_get_long(dev->config + pos); 933 assert(!(next & (PCI_EXT_CAP_ALIGN - 1))); 934 header = (header & ~PCI_EXT_CAP_NEXT_MASK) | 935 ((next << PCI_EXT_CAP_NEXT_SHIFT) & PCI_EXT_CAP_NEXT_MASK); 936 pci_set_long(dev->config + pos, header); 937 } 938 939 /* 940 * Caller must supply valid (offset, size) such that the range wouldn't 941 * overlap with other capability or other registers. 942 * This function doesn't check it. 943 */ 944 void pcie_add_capability(PCIDevice *dev, 945 uint16_t cap_id, uint8_t cap_ver, 946 uint16_t offset, uint16_t size) 947 { 948 assert(offset >= PCI_CONFIG_SPACE_SIZE); 949 assert(offset < (uint16_t)(offset + size)); 950 assert((uint16_t)(offset + size) <= PCIE_CONFIG_SPACE_SIZE); 951 assert(size >= 8); 952 assert(pci_is_express(dev)); 953 954 if (offset != PCI_CONFIG_SPACE_SIZE) { 955 uint16_t prev; 956 957 /* 958 * 0xffffffff is not a valid cap id (it's a 16 bit field). use 959 * internally to find the last capability in the linked list. 960 */ 961 pcie_find_capability_list(dev, 0xffffffff, &prev); 962 assert(prev >= PCI_CONFIG_SPACE_SIZE); 963 pcie_ext_cap_set_next(dev, prev, offset); 964 } 965 pci_set_long(dev->config + offset, PCI_EXT_CAP(cap_id, cap_ver, 0)); 966 967 /* Make capability read-only by default */ 968 memset(dev->wmask + offset, 0, size); 969 memset(dev->w1cmask + offset, 0, size); 970 /* Check capability by default */ 971 memset(dev->cmask + offset, 0xFF, size); 972 } 973 974 /* 975 * Sync the PCIe Link Status negotiated speed and width of a bridge with the 976 * downstream device. If downstream device is not present, re-write with the 977 * Link Capability fields. If downstream device reports invalid width or 978 * speed, replace with minimum values (LnkSta fields are RsvdZ on VFs but such 979 * values interfere with PCIe native hotplug detecting new devices). Limit 980 * width and speed to bridge capabilities for compatibility. Use config_read 981 * to access the downstream device since it could be an assigned device with 982 * volatile link information. 983 */ 984 void pcie_sync_bridge_lnk(PCIDevice *bridge_dev) 985 { 986 PCIBridge *br = PCI_BRIDGE(bridge_dev); 987 PCIBus *bus = pci_bridge_get_sec_bus(br); 988 PCIDevice *target = bus->devices[0]; 989 uint8_t *exp_cap = bridge_dev->config + bridge_dev->exp.exp_cap; 990 uint16_t lnksta, lnkcap = pci_get_word(exp_cap + PCI_EXP_LNKCAP); 991 992 if (!target || !target->exp.exp_cap) { 993 lnksta = lnkcap; 994 } else { 995 lnksta = target->config_read(target, 996 target->exp.exp_cap + PCI_EXP_LNKSTA, 997 sizeof(lnksta)); 998 999 if ((lnksta & PCI_EXP_LNKSTA_NLW) > (lnkcap & PCI_EXP_LNKCAP_MLW)) { 1000 lnksta &= ~PCI_EXP_LNKSTA_NLW; 1001 lnksta |= lnkcap & PCI_EXP_LNKCAP_MLW; 1002 } else if (!(lnksta & PCI_EXP_LNKSTA_NLW)) { 1003 lnksta |= QEMU_PCI_EXP_LNKSTA_NLW(QEMU_PCI_EXP_LNK_X1); 1004 } 1005 1006 if ((lnksta & PCI_EXP_LNKSTA_CLS) > (lnkcap & PCI_EXP_LNKCAP_SLS)) { 1007 lnksta &= ~PCI_EXP_LNKSTA_CLS; 1008 lnksta |= lnkcap & PCI_EXP_LNKCAP_SLS; 1009 } else if (!(lnksta & PCI_EXP_LNKSTA_CLS)) { 1010 lnksta |= QEMU_PCI_EXP_LNKSTA_CLS(QEMU_PCI_EXP_LNK_2_5GT); 1011 } 1012 } 1013 1014 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_LNKSTA, 1015 PCI_EXP_LNKSTA_CLS | PCI_EXP_LNKSTA_NLW); 1016 pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA, lnksta & 1017 (PCI_EXP_LNKSTA_CLS | PCI_EXP_LNKSTA_NLW)); 1018 } 1019 1020 /************************************************************************** 1021 * pci express extended capability helper functions 1022 */ 1023 1024 /* ARI */ 1025 void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn) 1026 { 1027 pcie_add_capability(dev, PCI_EXT_CAP_ID_ARI, PCI_ARI_VER, 1028 offset, PCI_ARI_SIZEOF); 1029 pci_set_long(dev->config + offset + PCI_ARI_CAP, (nextfn & 0xff) << 8); 1030 } 1031 1032 void pcie_dev_ser_num_init(PCIDevice *dev, uint16_t offset, uint64_t ser_num) 1033 { 1034 static const int pci_dsn_ver = 1; 1035 static const int pci_dsn_cap = 4; 1036 1037 pcie_add_capability(dev, PCI_EXT_CAP_ID_DSN, pci_dsn_ver, offset, 1038 PCI_EXT_CAP_DSN_SIZEOF); 1039 pci_set_quad(dev->config + offset + pci_dsn_cap, ser_num); 1040 } 1041 1042 void pcie_ats_init(PCIDevice *dev, uint16_t offset, bool aligned) 1043 { 1044 pcie_add_capability(dev, PCI_EXT_CAP_ID_ATS, 0x1, 1045 offset, PCI_EXT_CAP_ATS_SIZEOF); 1046 1047 dev->exp.ats_cap = offset; 1048 1049 /* Invalidate Queue Depth 0 */ 1050 if (aligned) { 1051 pci_set_word(dev->config + offset + PCI_ATS_CAP, 1052 PCI_ATS_CAP_PAGE_ALIGNED); 1053 } 1054 /* STU 0, Disabled by default */ 1055 pci_set_word(dev->config + offset + PCI_ATS_CTRL, 0); 1056 1057 pci_set_word(dev->wmask + dev->exp.ats_cap + PCI_ATS_CTRL, 0x800f); 1058 } 1059 1060 /* ACS (Access Control Services) */ 1061 void pcie_acs_init(PCIDevice *dev, uint16_t offset) 1062 { 1063 bool is_downstream = pci_is_express_downstream_port(dev); 1064 uint16_t cap_bits = 0; 1065 1066 /* For endpoints, only multifunction devs may have an ACS capability: */ 1067 assert(is_downstream || 1068 (dev->cap_present & QEMU_PCI_CAP_MULTIFUNCTION) || 1069 PCI_FUNC(dev->devfn)); 1070 1071 pcie_add_capability(dev, PCI_EXT_CAP_ID_ACS, PCI_ACS_VER, offset, 1072 PCI_ACS_SIZEOF); 1073 dev->exp.acs_cap = offset; 1074 1075 if (is_downstream) { 1076 /* 1077 * Downstream ports must implement SV, TB, RR, CR, UF, and DT (with 1078 * caveats on the latter four that we ignore for simplicity). 1079 * Endpoints may also implement a subset of ACS capabilities, 1080 * but these are optional if the endpoint does not support 1081 * peer-to-peer between functions and thus omitted here. 1082 */ 1083 cap_bits = PCI_ACS_SV | PCI_ACS_TB | PCI_ACS_RR | 1084 PCI_ACS_CR | PCI_ACS_UF | PCI_ACS_DT; 1085 } 1086 1087 pci_set_word(dev->config + offset + PCI_ACS_CAP, cap_bits); 1088 pci_set_word(dev->wmask + offset + PCI_ACS_CTRL, cap_bits); 1089 } 1090 1091 void pcie_acs_reset(PCIDevice *dev) 1092 { 1093 if (dev->exp.acs_cap) { 1094 pci_set_word(dev->config + dev->exp.acs_cap + PCI_ACS_CTRL, 0); 1095 } 1096 } 1097