1 /* 2 * pcie.c 3 * 4 * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp> 5 * VA Linux Systems Japan K.K. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qapi/error.h" 23 #include "qemu-common.h" 24 #include "hw/pci/pci_bridge.h" 25 #include "hw/pci/pcie.h" 26 #include "hw/pci/msix.h" 27 #include "hw/pci/msi.h" 28 #include "hw/pci/pci_bus.h" 29 #include "hw/pci/pcie_regs.h" 30 #include "qemu/range.h" 31 32 //#define DEBUG_PCIE 33 #ifdef DEBUG_PCIE 34 # define PCIE_DPRINTF(fmt, ...) \ 35 fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__) 36 #else 37 # define PCIE_DPRINTF(fmt, ...) do {} while (0) 38 #endif 39 #define PCIE_DEV_PRINTF(dev, fmt, ...) \ 40 PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__) 41 42 43 /*************************************************************************** 44 * pci express capability helper functions 45 */ 46 47 static void 48 pcie_cap_v1_fill(PCIDevice *dev, uint8_t port, uint8_t type, uint8_t version) 49 { 50 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 51 uint8_t *cmask = dev->cmask + dev->exp.exp_cap; 52 53 /* capability register 54 interrupt message number defaults to 0 */ 55 pci_set_word(exp_cap + PCI_EXP_FLAGS, 56 ((type << PCI_EXP_FLAGS_TYPE_SHIFT) & PCI_EXP_FLAGS_TYPE) | 57 version); 58 59 /* device capability register 60 * table 7-12: 61 * roll based error reporting bit must be set by all 62 * Functions conforming to the ECN, PCI Express Base 63 * Specification, Revision 1.1., or subsequent PCI Express Base 64 * Specification revisions. 65 */ 66 pci_set_long(exp_cap + PCI_EXP_DEVCAP, PCI_EXP_DEVCAP_RBER); 67 68 pci_set_long(exp_cap + PCI_EXP_LNKCAP, 69 (port << PCI_EXP_LNKCAP_PN_SHIFT) | 70 PCI_EXP_LNKCAP_ASPMS_0S | 71 PCI_EXP_LNK_MLW_1 | 72 PCI_EXP_LNK_LS_25); 73 74 pci_set_word(exp_cap + PCI_EXP_LNKSTA, 75 PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25); 76 77 if (dev->cap_present & QEMU_PCIE_LNKSTA_DLLLA) { 78 pci_word_test_and_set_mask(exp_cap + PCI_EXP_LNKSTA, 79 PCI_EXP_LNKSTA_DLLLA); 80 } 81 82 /* We changed link status bits over time, and changing them across 83 * migrations is generally fine as hardware changes them too. 84 * Let's not bother checking. 85 */ 86 pci_set_word(cmask + PCI_EXP_LNKSTA, 0); 87 } 88 89 int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port) 90 { 91 /* PCIe cap v2 init */ 92 int pos; 93 uint8_t *exp_cap; 94 95 assert(pci_is_express(dev)); 96 97 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset, PCI_EXP_VER2_SIZEOF); 98 if (pos < 0) { 99 return pos; 100 } 101 dev->exp.exp_cap = pos; 102 exp_cap = dev->config + pos; 103 104 /* Filling values common with v1 */ 105 pcie_cap_v1_fill(dev, port, type, PCI_EXP_FLAGS_VER2); 106 107 /* Filling v2 specific values */ 108 pci_set_long(exp_cap + PCI_EXP_DEVCAP2, 109 PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP); 110 111 pci_set_word(dev->wmask + pos + PCI_EXP_DEVCTL2, PCI_EXP_DEVCTL2_EETLPPB); 112 return pos; 113 } 114 115 int pcie_cap_v1_init(PCIDevice *dev, uint8_t offset, uint8_t type, 116 uint8_t port) 117 { 118 /* PCIe cap v1 init */ 119 int pos; 120 121 assert(pci_is_express(dev)); 122 123 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset, PCI_EXP_VER1_SIZEOF); 124 if (pos < 0) { 125 return pos; 126 } 127 dev->exp.exp_cap = pos; 128 129 pcie_cap_v1_fill(dev, port, type, PCI_EXP_FLAGS_VER1); 130 131 return pos; 132 } 133 134 static int 135 pcie_endpoint_cap_common_init(PCIDevice *dev, uint8_t offset, uint8_t cap_size) 136 { 137 uint8_t type = PCI_EXP_TYPE_ENDPOINT; 138 139 /* 140 * Windows guests will report Code 10, device cannot start, if 141 * a regular Endpoint type is exposed on a root complex. These 142 * should instead be Root Complex Integrated Endpoints. 143 */ 144 if (pci_bus_is_express(dev->bus) && pci_bus_is_root(dev->bus)) { 145 type = PCI_EXP_TYPE_RC_END; 146 } 147 148 return (cap_size == PCI_EXP_VER1_SIZEOF) 149 ? pcie_cap_v1_init(dev, offset, type, 0) 150 : pcie_cap_init(dev, offset, type, 0); 151 } 152 153 int pcie_endpoint_cap_init(PCIDevice *dev, uint8_t offset) 154 { 155 return pcie_endpoint_cap_common_init(dev, offset, PCI_EXP_VER2_SIZEOF); 156 } 157 158 int pcie_endpoint_cap_v1_init(PCIDevice *dev, uint8_t offset) 159 { 160 return pcie_endpoint_cap_common_init(dev, offset, PCI_EXP_VER1_SIZEOF); 161 } 162 163 void pcie_cap_exit(PCIDevice *dev) 164 { 165 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER2_SIZEOF); 166 } 167 168 void pcie_cap_v1_exit(PCIDevice *dev) 169 { 170 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER1_SIZEOF); 171 } 172 173 uint8_t pcie_cap_get_type(const PCIDevice *dev) 174 { 175 uint32_t pos = dev->exp.exp_cap; 176 assert(pos > 0); 177 return (pci_get_word(dev->config + pos + PCI_EXP_FLAGS) & 178 PCI_EXP_FLAGS_TYPE) >> PCI_EXP_FLAGS_TYPE_SHIFT; 179 } 180 181 /* MSI/MSI-X */ 182 /* pci express interrupt message number */ 183 /* 7.8.2 PCI Express Capabilities Register: Interrupt Message Number */ 184 void pcie_cap_flags_set_vector(PCIDevice *dev, uint8_t vector) 185 { 186 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 187 assert(vector < 32); 188 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_FLAGS, PCI_EXP_FLAGS_IRQ); 189 pci_word_test_and_set_mask(exp_cap + PCI_EXP_FLAGS, 190 vector << PCI_EXP_FLAGS_IRQ_SHIFT); 191 } 192 193 uint8_t pcie_cap_flags_get_vector(PCIDevice *dev) 194 { 195 return (pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_FLAGS) & 196 PCI_EXP_FLAGS_IRQ) >> PCI_EXP_FLAGS_IRQ_SHIFT; 197 } 198 199 void pcie_cap_deverr_init(PCIDevice *dev) 200 { 201 uint32_t pos = dev->exp.exp_cap; 202 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP, 203 PCI_EXP_DEVCAP_RBER); 204 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL, 205 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 206 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 207 pci_long_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_DEVSTA, 208 PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED | 209 PCI_EXP_DEVSTA_FED | PCI_EXP_DEVSTA_URD); 210 } 211 212 void pcie_cap_deverr_reset(PCIDevice *dev) 213 { 214 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 215 pci_long_test_and_clear_mask(devctl, 216 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 217 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 218 } 219 220 static void hotplug_event_update_event_status(PCIDevice *dev) 221 { 222 uint32_t pos = dev->exp.exp_cap; 223 uint8_t *exp_cap = dev->config + pos; 224 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 225 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 226 227 dev->exp.hpev_notified = (sltctl & PCI_EXP_SLTCTL_HPIE) && 228 (sltsta & sltctl & PCI_EXP_HP_EV_SUPPORTED); 229 } 230 231 static void hotplug_event_notify(PCIDevice *dev) 232 { 233 bool prev = dev->exp.hpev_notified; 234 235 hotplug_event_update_event_status(dev); 236 237 if (prev == dev->exp.hpev_notified) { 238 return; 239 } 240 241 /* Note: the logic above does not take into account whether interrupts 242 * are masked. The result is that interrupt will be sent when it is 243 * subsequently unmasked. This appears to be legal: Section 6.7.3.4: 244 * The Port may optionally send an MSI when there are hot-plug events that 245 * occur while interrupt generation is disabled, and interrupt generation is 246 * subsequently enabled. */ 247 if (msix_enabled(dev)) { 248 msix_notify(dev, pcie_cap_flags_get_vector(dev)); 249 } else if (msi_enabled(dev)) { 250 msi_notify(dev, pcie_cap_flags_get_vector(dev)); 251 } else { 252 pci_set_irq(dev, dev->exp.hpev_notified); 253 } 254 } 255 256 static void hotplug_event_clear(PCIDevice *dev) 257 { 258 hotplug_event_update_event_status(dev); 259 if (!msix_enabled(dev) && !msi_enabled(dev) && !dev->exp.hpev_notified) { 260 pci_irq_deassert(dev); 261 } 262 } 263 264 /* 265 * A PCI Express Hot-Plug Event has occurred, so update slot status register 266 * and notify OS of the event if necessary. 267 * 268 * 6.7.3 PCI Express Hot-Plug Events 269 * 6.7.3.4 Software Notification of Hot-Plug Events 270 */ 271 static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event) 272 { 273 /* Minor optimization: if nothing changed - no event is needed. */ 274 if (pci_word_test_and_set_mask(dev->config + dev->exp.exp_cap + 275 PCI_EXP_SLTSTA, event)) { 276 return; 277 } 278 hotplug_event_notify(dev); 279 } 280 281 static void pcie_cap_slot_hotplug_common(PCIDevice *hotplug_dev, 282 DeviceState *dev, 283 uint8_t **exp_cap, Error **errp) 284 { 285 *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; 286 uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA); 287 288 PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: 0x%x\n", sltsta); 289 if (sltsta & PCI_EXP_SLTSTA_EIS) { 290 /* the slot is electromechanically locked. 291 * This error is propagated up to qdev and then to HMP/QMP. 292 */ 293 error_setg_errno(errp, EBUSY, "slot is electromechanically locked"); 294 } 295 } 296 297 void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, 298 Error **errp) 299 { 300 uint8_t *exp_cap; 301 PCIDevice *pci_dev = PCI_DEVICE(dev); 302 303 pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); 304 305 /* Don't send event when device is enabled during qemu machine creation: 306 * it is present on boot, no hotplug event is necessary. We do send an 307 * event when the device is disabled later. */ 308 if (!dev->hotplugged) { 309 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 310 PCI_EXP_SLTSTA_PDS); 311 return; 312 } 313 314 /* To enable multifunction hot-plug, we just ensure the function 315 * 0 added last. When function 0 is added, we set the sltsta and 316 * inform OS via event notification. 317 */ 318 if (pci_get_function_0(pci_dev)) { 319 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 320 PCI_EXP_SLTSTA_PDS); 321 pcie_cap_slot_event(PCI_DEVICE(hotplug_dev), 322 PCI_EXP_HP_EV_PDC | PCI_EXP_HP_EV_ABP); 323 } 324 } 325 326 static void pcie_unplug_device(PCIBus *bus, PCIDevice *dev, void *opaque) 327 { 328 object_unparent(OBJECT(dev)); 329 } 330 331 void pcie_cap_slot_hot_unplug_request_cb(HotplugHandler *hotplug_dev, 332 DeviceState *dev, Error **errp) 333 { 334 uint8_t *exp_cap; 335 PCIDevice *pci_dev = PCI_DEVICE(dev); 336 PCIBus *bus = pci_dev->bus; 337 338 pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); 339 340 /* In case user cancel the operation of multi-function hot-add, 341 * remove the function that is unexposed to guest individually, 342 * without interaction with guest. 343 */ 344 if (pci_dev->devfn && 345 !bus->devices[0]) { 346 pcie_unplug_device(bus, pci_dev, NULL); 347 348 return; 349 } 350 351 pcie_cap_slot_push_attention_button(PCI_DEVICE(hotplug_dev)); 352 } 353 354 /* pci express slot for pci express root/downstream port 355 PCI express capability slot registers */ 356 void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot) 357 { 358 uint32_t pos = dev->exp.exp_cap; 359 360 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_FLAGS, 361 PCI_EXP_FLAGS_SLOT); 362 363 pci_long_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCAP, 364 ~PCI_EXP_SLTCAP_PSN); 365 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 366 (slot << PCI_EXP_SLTCAP_PSN_SHIFT) | 367 PCI_EXP_SLTCAP_EIP | 368 PCI_EXP_SLTCAP_HPS | 369 PCI_EXP_SLTCAP_HPC | 370 PCI_EXP_SLTCAP_PIP | 371 PCI_EXP_SLTCAP_AIP | 372 PCI_EXP_SLTCAP_ABP); 373 374 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 375 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 376 PCI_EXP_SLTCAP_PCP); 377 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 378 PCI_EXP_SLTCTL_PCC); 379 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 380 PCI_EXP_SLTCTL_PCC); 381 } 382 383 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 384 PCI_EXP_SLTCTL_PIC | 385 PCI_EXP_SLTCTL_AIC); 386 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCTL, 387 PCI_EXP_SLTCTL_PIC_OFF | 388 PCI_EXP_SLTCTL_AIC_OFF); 389 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 390 PCI_EXP_SLTCTL_PIC | 391 PCI_EXP_SLTCTL_AIC | 392 PCI_EXP_SLTCTL_HPIE | 393 PCI_EXP_SLTCTL_CCIE | 394 PCI_EXP_SLTCTL_PDCE | 395 PCI_EXP_SLTCTL_ABPE); 396 /* Although reading PCI_EXP_SLTCTL_EIC returns always 0, 397 * make the bit writable here in order to detect 1b is written. 398 * pcie_cap_slot_write_config() test-and-clear the bit, so 399 * this bit always returns 0 to the guest. 400 */ 401 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 402 PCI_EXP_SLTCTL_EIC); 403 404 pci_word_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_SLTSTA, 405 PCI_EXP_HP_EV_SUPPORTED); 406 407 dev->exp.hpev_notified = false; 408 409 qbus_set_hotplug_handler(BUS(pci_bridge_get_sec_bus(PCI_BRIDGE(dev))), 410 DEVICE(dev), NULL); 411 } 412 413 void pcie_cap_slot_reset(PCIDevice *dev) 414 { 415 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 416 uint8_t port_type = pcie_cap_get_type(dev); 417 418 assert(port_type == PCI_EXP_TYPE_DOWNSTREAM || 419 port_type == PCI_EXP_TYPE_ROOT_PORT); 420 421 PCIE_DEV_PRINTF(dev, "reset\n"); 422 423 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 424 PCI_EXP_SLTCTL_EIC | 425 PCI_EXP_SLTCTL_PIC | 426 PCI_EXP_SLTCTL_AIC | 427 PCI_EXP_SLTCTL_HPIE | 428 PCI_EXP_SLTCTL_CCIE | 429 PCI_EXP_SLTCTL_PDCE | 430 PCI_EXP_SLTCTL_ABPE); 431 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 432 PCI_EXP_SLTCTL_AIC_OFF); 433 434 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 435 /* Downstream ports enforce device number 0. */ 436 bool populated = pci_bridge_get_sec_bus(PCI_BRIDGE(dev))->devices[0]; 437 uint16_t pic; 438 439 if (populated) { 440 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 441 PCI_EXP_SLTCTL_PCC); 442 } else { 443 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 444 PCI_EXP_SLTCTL_PCC); 445 } 446 447 pic = populated ? PCI_EXP_SLTCTL_PIC_ON : PCI_EXP_SLTCTL_PIC_OFF; 448 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, pic); 449 } 450 451 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 452 PCI_EXP_SLTSTA_EIS |/* on reset, 453 the lock is released */ 454 PCI_EXP_SLTSTA_CC | 455 PCI_EXP_SLTSTA_PDC | 456 PCI_EXP_SLTSTA_ABP); 457 458 hotplug_event_update_event_status(dev); 459 } 460 461 void pcie_cap_slot_write_config(PCIDevice *dev, 462 uint32_t addr, uint32_t val, int len) 463 { 464 uint32_t pos = dev->exp.exp_cap; 465 uint8_t *exp_cap = dev->config + pos; 466 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 467 468 if (ranges_overlap(addr, len, pos + PCI_EXP_SLTSTA, 2)) { 469 hotplug_event_clear(dev); 470 } 471 472 if (!ranges_overlap(addr, len, pos + PCI_EXP_SLTCTL, 2)) { 473 return; 474 } 475 476 if (pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 477 PCI_EXP_SLTCTL_EIC)) { 478 sltsta ^= PCI_EXP_SLTSTA_EIS; /* toggle PCI_EXP_SLTSTA_EIS bit */ 479 pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta); 480 PCIE_DEV_PRINTF(dev, "PCI_EXP_SLTCTL_EIC: " 481 "sltsta -> 0x%02"PRIx16"\n", 482 sltsta); 483 } 484 485 /* 486 * If the slot is polulated, power indicator is off and power 487 * controller is off, it is safe to detach the devices. 488 */ 489 if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) && 490 ((val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF)) { 491 PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev)); 492 pci_for_each_device(sec_bus, pci_bus_num(sec_bus), 493 pcie_unplug_device, NULL); 494 495 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 496 PCI_EXP_SLTSTA_PDS); 497 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 498 PCI_EXP_SLTSTA_PDC); 499 } 500 501 hotplug_event_notify(dev); 502 503 /* 504 * 6.7.3.2 Command Completed Events 505 * 506 * Software issues a command to a hot-plug capable Downstream Port by 507 * issuing a write transaction that targets any portion of the Port’s Slot 508 * Control register. A single write to the Slot Control register is 509 * considered to be a single command, even if the write affects more than 510 * one field in the Slot Control register. In response to this transaction, 511 * the Port must carry out the requested actions and then set the 512 * associated status field for the command completed event. */ 513 514 /* Real hardware might take a while to complete requested command because 515 * physical movement would be involved like locking the electromechanical 516 * lock. However in our case, command is completed instantaneously above, 517 * so send a command completion event right now. 518 */ 519 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_CCI); 520 } 521 522 int pcie_cap_slot_post_load(void *opaque, int version_id) 523 { 524 PCIDevice *dev = opaque; 525 hotplug_event_update_event_status(dev); 526 return 0; 527 } 528 529 void pcie_cap_slot_push_attention_button(PCIDevice *dev) 530 { 531 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_ABP); 532 } 533 534 /* root control/capabilities/status. PME isn't emulated for now */ 535 void pcie_cap_root_init(PCIDevice *dev) 536 { 537 pci_set_word(dev->wmask + dev->exp.exp_cap + PCI_EXP_RTCTL, 538 PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | 539 PCI_EXP_RTCTL_SEFEE); 540 } 541 542 void pcie_cap_root_reset(PCIDevice *dev) 543 { 544 pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0); 545 } 546 547 /* function level reset(FLR) */ 548 void pcie_cap_flr_init(PCIDevice *dev) 549 { 550 pci_long_test_and_set_mask(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP, 551 PCI_EXP_DEVCAP_FLR); 552 553 /* Although reading BCR_FLR returns always 0, 554 * the bit is made writable here in order to detect the 1b is written 555 * pcie_cap_flr_write_config() test-and-clear the bit, so 556 * this bit always returns 0 to the guest. 557 */ 558 pci_word_test_and_set_mask(dev->wmask + dev->exp.exp_cap + PCI_EXP_DEVCTL, 559 PCI_EXP_DEVCTL_BCR_FLR); 560 } 561 562 void pcie_cap_flr_write_config(PCIDevice *dev, 563 uint32_t addr, uint32_t val, int len) 564 { 565 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 566 if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) { 567 /* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler 568 so the handler can detect FLR by looking at this bit. */ 569 pci_device_reset(dev); 570 pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR); 571 } 572 } 573 574 /* Alternative Routing-ID Interpretation (ARI) 575 * forwarding support for root and downstream ports 576 */ 577 void pcie_cap_arifwd_init(PCIDevice *dev) 578 { 579 uint32_t pos = dev->exp.exp_cap; 580 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP2, 581 PCI_EXP_DEVCAP2_ARI); 582 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL2, 583 PCI_EXP_DEVCTL2_ARI); 584 } 585 586 void pcie_cap_arifwd_reset(PCIDevice *dev) 587 { 588 uint8_t *devctl2 = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2; 589 pci_long_test_and_clear_mask(devctl2, PCI_EXP_DEVCTL2_ARI); 590 } 591 592 bool pcie_cap_is_arifwd_enabled(const PCIDevice *dev) 593 { 594 if (!pci_is_express(dev)) { 595 return false; 596 } 597 if (!dev->exp.exp_cap) { 598 return false; 599 } 600 601 return pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2) & 602 PCI_EXP_DEVCTL2_ARI; 603 } 604 605 /************************************************************************** 606 * pci express extended capability list management functions 607 * uint16_t ext_cap_id (16 bit) 608 * uint8_t cap_ver (4 bit) 609 * uint16_t cap_offset (12 bit) 610 * uint16_t ext_cap_size 611 */ 612 613 /* Passing a cap_id value > 0xffff will return 0 and put end of list in prev */ 614 static uint16_t pcie_find_capability_list(PCIDevice *dev, uint32_t cap_id, 615 uint16_t *prev_p) 616 { 617 uint16_t prev = 0; 618 uint16_t next; 619 uint32_t header = pci_get_long(dev->config + PCI_CONFIG_SPACE_SIZE); 620 621 if (!header) { 622 /* no extended capability */ 623 next = 0; 624 goto out; 625 } 626 for (next = PCI_CONFIG_SPACE_SIZE; next; 627 prev = next, next = PCI_EXT_CAP_NEXT(header)) { 628 629 assert(next >= PCI_CONFIG_SPACE_SIZE); 630 assert(next <= PCIE_CONFIG_SPACE_SIZE - 8); 631 632 header = pci_get_long(dev->config + next); 633 if (PCI_EXT_CAP_ID(header) == cap_id) { 634 break; 635 } 636 } 637 638 out: 639 if (prev_p) { 640 *prev_p = prev; 641 } 642 return next; 643 } 644 645 uint16_t pcie_find_capability(PCIDevice *dev, uint16_t cap_id) 646 { 647 return pcie_find_capability_list(dev, cap_id, NULL); 648 } 649 650 static void pcie_ext_cap_set_next(PCIDevice *dev, uint16_t pos, uint16_t next) 651 { 652 uint32_t header = pci_get_long(dev->config + pos); 653 assert(!(next & (PCI_EXT_CAP_ALIGN - 1))); 654 header = (header & ~PCI_EXT_CAP_NEXT_MASK) | 655 ((next << PCI_EXT_CAP_NEXT_SHIFT) & PCI_EXT_CAP_NEXT_MASK); 656 pci_set_long(dev->config + pos, header); 657 } 658 659 /* 660 * Caller must supply valid (offset, size) such that the range wouldn't 661 * overlap with other capability or other registers. 662 * This function doesn't check it. 663 */ 664 void pcie_add_capability(PCIDevice *dev, 665 uint16_t cap_id, uint8_t cap_ver, 666 uint16_t offset, uint16_t size) 667 { 668 assert(offset >= PCI_CONFIG_SPACE_SIZE); 669 assert(offset < offset + size); 670 assert(offset + size <= PCIE_CONFIG_SPACE_SIZE); 671 assert(size >= 8); 672 assert(pci_is_express(dev)); 673 674 if (offset != PCI_CONFIG_SPACE_SIZE) { 675 uint16_t prev; 676 677 /* 678 * 0xffffffff is not a valid cap id (it's a 16 bit field). use 679 * internally to find the last capability in the linked list. 680 */ 681 pcie_find_capability_list(dev, 0xffffffff, &prev); 682 assert(prev >= PCI_CONFIG_SPACE_SIZE); 683 pcie_ext_cap_set_next(dev, prev, offset); 684 } 685 pci_set_long(dev->config + offset, PCI_EXT_CAP(cap_id, cap_ver, 0)); 686 687 /* Make capability read-only by default */ 688 memset(dev->wmask + offset, 0, size); 689 memset(dev->w1cmask + offset, 0, size); 690 /* Check capability by default */ 691 memset(dev->cmask + offset, 0xFF, size); 692 } 693 694 /************************************************************************** 695 * pci express extended capability helper functions 696 */ 697 698 /* ARI */ 699 void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn) 700 { 701 pcie_add_capability(dev, PCI_EXT_CAP_ID_ARI, PCI_ARI_VER, 702 offset, PCI_ARI_SIZEOF); 703 pci_set_long(dev->config + offset + PCI_ARI_CAP, (nextfn & 0xff) << 8); 704 } 705 706 void pcie_dev_ser_num_init(PCIDevice *dev, uint16_t offset, uint64_t ser_num) 707 { 708 static const int pci_dsn_ver = 1; 709 static const int pci_dsn_cap = 4; 710 711 pcie_add_capability(dev, PCI_EXT_CAP_ID_DSN, pci_dsn_ver, offset, 712 PCI_EXT_CAP_DSN_SIZEOF); 713 pci_set_quad(dev->config + offset + pci_dsn_cap, ser_num); 714 } 715 716 void pcie_ats_init(PCIDevice *dev, uint16_t offset) 717 { 718 pcie_add_capability(dev, PCI_EXT_CAP_ID_ATS, 0x1, 719 offset, PCI_EXT_CAP_ATS_SIZEOF); 720 721 dev->exp.ats_cap = offset; 722 723 /* Invalidate Queue Depth 0, Page Aligned Request 0 */ 724 pci_set_word(dev->config + offset + PCI_ATS_CAP, 0); 725 /* STU 0, Disabled by default */ 726 pci_set_word(dev->config + offset + PCI_ATS_CTRL, 0); 727 728 pci_set_word(dev->wmask + dev->exp.ats_cap + PCI_ATS_CTRL, 0x800f); 729 } 730