1 /* 2 * pcie.c 3 * 4 * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp> 5 * VA Linux Systems Japan K.K. 6 * 7 * This program is free software; you can redistribute it and/or modify 8 * it under the terms of the GNU General Public License as published by 9 * the Free Software Foundation; either version 2 of the License, or 10 * (at your option) any later version. 11 * 12 * This program is distributed in the hope that it will be useful, 13 * but WITHOUT ANY WARRANTY; without even the implied warranty of 14 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 * GNU General Public License for more details. 16 * 17 * You should have received a copy of the GNU General Public License along 18 * with this program; if not, see <http://www.gnu.org/licenses/>. 19 */ 20 21 #include "qemu/osdep.h" 22 #include "qemu-common.h" 23 #include "hw/pci/pci_bridge.h" 24 #include "hw/pci/pcie.h" 25 #include "hw/pci/msix.h" 26 #include "hw/pci/msi.h" 27 #include "hw/pci/pci_bus.h" 28 #include "hw/pci/pcie_regs.h" 29 #include "qemu/range.h" 30 31 //#define DEBUG_PCIE 32 #ifdef DEBUG_PCIE 33 # define PCIE_DPRINTF(fmt, ...) \ 34 fprintf(stderr, "%s:%d " fmt, __func__, __LINE__, ## __VA_ARGS__) 35 #else 36 # define PCIE_DPRINTF(fmt, ...) do {} while (0) 37 #endif 38 #define PCIE_DEV_PRINTF(dev, fmt, ...) \ 39 PCIE_DPRINTF("%s:%x "fmt, (dev)->name, (dev)->devfn, ## __VA_ARGS__) 40 41 42 /*************************************************************************** 43 * pci express capability helper functions 44 */ 45 int pcie_cap_init(PCIDevice *dev, uint8_t offset, uint8_t type, uint8_t port) 46 { 47 int pos; 48 uint8_t *exp_cap; 49 50 assert(pci_is_express(dev)); 51 52 pos = pci_add_capability(dev, PCI_CAP_ID_EXP, offset, 53 PCI_EXP_VER2_SIZEOF); 54 if (pos < 0) { 55 return pos; 56 } 57 dev->exp.exp_cap = pos; 58 exp_cap = dev->config + pos; 59 60 /* capability register 61 interrupt message number defaults to 0 */ 62 pci_set_word(exp_cap + PCI_EXP_FLAGS, 63 ((type << PCI_EXP_FLAGS_TYPE_SHIFT) & PCI_EXP_FLAGS_TYPE) | 64 PCI_EXP_FLAGS_VER2); 65 66 /* device capability register 67 * table 7-12: 68 * roll based error reporting bit must be set by all 69 * Functions conforming to the ECN, PCI Express Base 70 * Specification, Revision 1.1., or subsequent PCI Express Base 71 * Specification revisions. 72 */ 73 pci_set_long(exp_cap + PCI_EXP_DEVCAP, PCI_EXP_DEVCAP_RBER); 74 75 pci_set_long(exp_cap + PCI_EXP_LNKCAP, 76 (port << PCI_EXP_LNKCAP_PN_SHIFT) | 77 PCI_EXP_LNKCAP_ASPMS_0S | 78 PCI_EXP_LNK_MLW_1 | 79 PCI_EXP_LNK_LS_25); 80 81 pci_set_word(exp_cap + PCI_EXP_LNKSTA, 82 PCI_EXP_LNK_MLW_1 | PCI_EXP_LNK_LS_25 |PCI_EXP_LNKSTA_DLLLA); 83 84 pci_set_long(exp_cap + PCI_EXP_DEVCAP2, 85 PCI_EXP_DEVCAP2_EFF | PCI_EXP_DEVCAP2_EETLPP); 86 87 pci_set_word(dev->wmask + pos + PCI_EXP_DEVCTL2, PCI_EXP_DEVCTL2_EETLPPB); 88 return pos; 89 } 90 91 int pcie_endpoint_cap_init(PCIDevice *dev, uint8_t offset) 92 { 93 uint8_t type = PCI_EXP_TYPE_ENDPOINT; 94 95 /* 96 * Windows guests will report Code 10, device cannot start, if 97 * a regular Endpoint type is exposed on a root complex. These 98 * should instead be Root Complex Integrated Endpoints. 99 */ 100 if (pci_bus_is_express(dev->bus) && pci_bus_is_root(dev->bus)) { 101 type = PCI_EXP_TYPE_RC_END; 102 } 103 104 return pcie_cap_init(dev, offset, type, 0); 105 } 106 107 void pcie_cap_exit(PCIDevice *dev) 108 { 109 pci_del_capability(dev, PCI_CAP_ID_EXP, PCI_EXP_VER2_SIZEOF); 110 } 111 112 uint8_t pcie_cap_get_type(const PCIDevice *dev) 113 { 114 uint32_t pos = dev->exp.exp_cap; 115 assert(pos > 0); 116 return (pci_get_word(dev->config + pos + PCI_EXP_FLAGS) & 117 PCI_EXP_FLAGS_TYPE) >> PCI_EXP_FLAGS_TYPE_SHIFT; 118 } 119 120 /* MSI/MSI-X */ 121 /* pci express interrupt message number */ 122 /* 7.8.2 PCI Express Capabilities Register: Interrupt Message Number */ 123 void pcie_cap_flags_set_vector(PCIDevice *dev, uint8_t vector) 124 { 125 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 126 assert(vector < 32); 127 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_FLAGS, PCI_EXP_FLAGS_IRQ); 128 pci_word_test_and_set_mask(exp_cap + PCI_EXP_FLAGS, 129 vector << PCI_EXP_FLAGS_IRQ_SHIFT); 130 } 131 132 uint8_t pcie_cap_flags_get_vector(PCIDevice *dev) 133 { 134 return (pci_get_word(dev->config + dev->exp.exp_cap + PCI_EXP_FLAGS) & 135 PCI_EXP_FLAGS_IRQ) >> PCI_EXP_FLAGS_IRQ_SHIFT; 136 } 137 138 void pcie_cap_deverr_init(PCIDevice *dev) 139 { 140 uint32_t pos = dev->exp.exp_cap; 141 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP, 142 PCI_EXP_DEVCAP_RBER); 143 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL, 144 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 145 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 146 pci_long_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_DEVSTA, 147 PCI_EXP_DEVSTA_CED | PCI_EXP_DEVSTA_NFED | 148 PCI_EXP_DEVSTA_FED | PCI_EXP_DEVSTA_URD); 149 } 150 151 void pcie_cap_deverr_reset(PCIDevice *dev) 152 { 153 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 154 pci_long_test_and_clear_mask(devctl, 155 PCI_EXP_DEVCTL_CERE | PCI_EXP_DEVCTL_NFERE | 156 PCI_EXP_DEVCTL_FERE | PCI_EXP_DEVCTL_URRE); 157 } 158 159 static void hotplug_event_update_event_status(PCIDevice *dev) 160 { 161 uint32_t pos = dev->exp.exp_cap; 162 uint8_t *exp_cap = dev->config + pos; 163 uint16_t sltctl = pci_get_word(exp_cap + PCI_EXP_SLTCTL); 164 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 165 166 dev->exp.hpev_notified = (sltctl & PCI_EXP_SLTCTL_HPIE) && 167 (sltsta & sltctl & PCI_EXP_HP_EV_SUPPORTED); 168 } 169 170 static void hotplug_event_notify(PCIDevice *dev) 171 { 172 bool prev = dev->exp.hpev_notified; 173 174 hotplug_event_update_event_status(dev); 175 176 if (prev == dev->exp.hpev_notified) { 177 return; 178 } 179 180 /* Note: the logic above does not take into account whether interrupts 181 * are masked. The result is that interrupt will be sent when it is 182 * subsequently unmasked. This appears to be legal: Section 6.7.3.4: 183 * The Port may optionally send an MSI when there are hot-plug events that 184 * occur while interrupt generation is disabled, and interrupt generation is 185 * subsequently enabled. */ 186 if (msix_enabled(dev)) { 187 msix_notify(dev, pcie_cap_flags_get_vector(dev)); 188 } else if (msi_enabled(dev)) { 189 msi_notify(dev, pcie_cap_flags_get_vector(dev)); 190 } else { 191 pci_set_irq(dev, dev->exp.hpev_notified); 192 } 193 } 194 195 static void hotplug_event_clear(PCIDevice *dev) 196 { 197 hotplug_event_update_event_status(dev); 198 if (!msix_enabled(dev) && !msi_enabled(dev) && !dev->exp.hpev_notified) { 199 pci_irq_deassert(dev); 200 } 201 } 202 203 /* 204 * A PCI Express Hot-Plug Event has occurred, so update slot status register 205 * and notify OS of the event if necessary. 206 * 207 * 6.7.3 PCI Express Hot-Plug Events 208 * 6.7.3.4 Software Notification of Hot-Plug Events 209 */ 210 static void pcie_cap_slot_event(PCIDevice *dev, PCIExpressHotPlugEvent event) 211 { 212 /* Minor optimization: if nothing changed - no event is needed. */ 213 if (pci_word_test_and_set_mask(dev->config + dev->exp.exp_cap + 214 PCI_EXP_SLTSTA, event)) { 215 return; 216 } 217 hotplug_event_notify(dev); 218 } 219 220 static void pcie_cap_slot_hotplug_common(PCIDevice *hotplug_dev, 221 DeviceState *dev, 222 uint8_t **exp_cap, Error **errp) 223 { 224 *exp_cap = hotplug_dev->config + hotplug_dev->exp.exp_cap; 225 uint16_t sltsta = pci_get_word(*exp_cap + PCI_EXP_SLTSTA); 226 227 PCIE_DEV_PRINTF(PCI_DEVICE(dev), "hotplug state: 0x%x\n", sltsta); 228 if (sltsta & PCI_EXP_SLTSTA_EIS) { 229 /* the slot is electromechanically locked. 230 * This error is propagated up to qdev and then to HMP/QMP. 231 */ 232 error_setg_errno(errp, EBUSY, "slot is electromechanically locked"); 233 } 234 } 235 236 void pcie_cap_slot_hotplug_cb(HotplugHandler *hotplug_dev, DeviceState *dev, 237 Error **errp) 238 { 239 uint8_t *exp_cap; 240 PCIDevice *pci_dev = PCI_DEVICE(dev); 241 242 pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); 243 244 /* Don't send event when device is enabled during qemu machine creation: 245 * it is present on boot, no hotplug event is necessary. We do send an 246 * event when the device is disabled later. */ 247 if (!dev->hotplugged) { 248 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 249 PCI_EXP_SLTSTA_PDS); 250 return; 251 } 252 253 /* To enable multifunction hot-plug, we just ensure the function 254 * 0 added last. When function 0 is added, we set the sltsta and 255 * inform OS via event notification. 256 */ 257 if (pci_get_function_0(pci_dev)) { 258 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 259 PCI_EXP_SLTSTA_PDS); 260 pcie_cap_slot_event(PCI_DEVICE(hotplug_dev), 261 PCI_EXP_HP_EV_PDC | PCI_EXP_HP_EV_ABP); 262 } 263 } 264 265 static void pcie_unplug_device(PCIBus *bus, PCIDevice *dev, void *opaque) 266 { 267 object_unparent(OBJECT(dev)); 268 } 269 270 void pcie_cap_slot_hot_unplug_request_cb(HotplugHandler *hotplug_dev, 271 DeviceState *dev, Error **errp) 272 { 273 uint8_t *exp_cap; 274 PCIDevice *pci_dev = PCI_DEVICE(dev); 275 PCIBus *bus = pci_dev->bus; 276 277 pcie_cap_slot_hotplug_common(PCI_DEVICE(hotplug_dev), dev, &exp_cap, errp); 278 279 /* In case user cancel the operation of multi-function hot-add, 280 * remove the function that is unexposed to guest individually, 281 * without interaction with guest. 282 */ 283 if (pci_dev->devfn && 284 !bus->devices[0]) { 285 pcie_unplug_device(bus, pci_dev, NULL); 286 287 return; 288 } 289 290 pcie_cap_slot_push_attention_button(PCI_DEVICE(hotplug_dev)); 291 } 292 293 /* pci express slot for pci express root/downstream port 294 PCI express capability slot registers */ 295 void pcie_cap_slot_init(PCIDevice *dev, uint16_t slot) 296 { 297 uint32_t pos = dev->exp.exp_cap; 298 299 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_FLAGS, 300 PCI_EXP_FLAGS_SLOT); 301 302 pci_long_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCAP, 303 ~PCI_EXP_SLTCAP_PSN); 304 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 305 (slot << PCI_EXP_SLTCAP_PSN_SHIFT) | 306 PCI_EXP_SLTCAP_EIP | 307 PCI_EXP_SLTCAP_HPS | 308 PCI_EXP_SLTCAP_HPC | 309 PCI_EXP_SLTCAP_PIP | 310 PCI_EXP_SLTCAP_AIP | 311 PCI_EXP_SLTCAP_ABP); 312 313 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 314 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCAP, 315 PCI_EXP_SLTCAP_PCP); 316 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 317 PCI_EXP_SLTCTL_PCC); 318 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 319 PCI_EXP_SLTCTL_PCC); 320 } 321 322 pci_word_test_and_clear_mask(dev->config + pos + PCI_EXP_SLTCTL, 323 PCI_EXP_SLTCTL_PIC | 324 PCI_EXP_SLTCTL_AIC); 325 pci_word_test_and_set_mask(dev->config + pos + PCI_EXP_SLTCTL, 326 PCI_EXP_SLTCTL_PIC_OFF | 327 PCI_EXP_SLTCTL_AIC_OFF); 328 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 329 PCI_EXP_SLTCTL_PIC | 330 PCI_EXP_SLTCTL_AIC | 331 PCI_EXP_SLTCTL_HPIE | 332 PCI_EXP_SLTCTL_CCIE | 333 PCI_EXP_SLTCTL_PDCE | 334 PCI_EXP_SLTCTL_ABPE); 335 /* Although reading PCI_EXP_SLTCTL_EIC returns always 0, 336 * make the bit writable here in order to detect 1b is written. 337 * pcie_cap_slot_write_config() test-and-clear the bit, so 338 * this bit always returns 0 to the guest. 339 */ 340 pci_word_test_and_set_mask(dev->wmask + pos + PCI_EXP_SLTCTL, 341 PCI_EXP_SLTCTL_EIC); 342 343 pci_word_test_and_set_mask(dev->w1cmask + pos + PCI_EXP_SLTSTA, 344 PCI_EXP_HP_EV_SUPPORTED); 345 346 dev->exp.hpev_notified = false; 347 348 qbus_set_hotplug_handler(BUS(pci_bridge_get_sec_bus(PCI_BRIDGE(dev))), 349 DEVICE(dev), NULL); 350 } 351 352 void pcie_cap_slot_reset(PCIDevice *dev) 353 { 354 uint8_t *exp_cap = dev->config + dev->exp.exp_cap; 355 uint8_t port_type = pcie_cap_get_type(dev); 356 357 assert(port_type == PCI_EXP_TYPE_DOWNSTREAM || 358 port_type == PCI_EXP_TYPE_ROOT_PORT); 359 360 PCIE_DEV_PRINTF(dev, "reset\n"); 361 362 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 363 PCI_EXP_SLTCTL_EIC | 364 PCI_EXP_SLTCTL_PIC | 365 PCI_EXP_SLTCTL_AIC | 366 PCI_EXP_SLTCTL_HPIE | 367 PCI_EXP_SLTCTL_CCIE | 368 PCI_EXP_SLTCTL_PDCE | 369 PCI_EXP_SLTCTL_ABPE); 370 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 371 PCI_EXP_SLTCTL_AIC_OFF); 372 373 if (dev->cap_present & QEMU_PCIE_SLTCAP_PCP) { 374 /* Downstream ports enforce device number 0. */ 375 bool populated = pci_bridge_get_sec_bus(PCI_BRIDGE(dev))->devices[0]; 376 uint16_t pic; 377 378 if (populated) { 379 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 380 PCI_EXP_SLTCTL_PCC); 381 } else { 382 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, 383 PCI_EXP_SLTCTL_PCC); 384 } 385 386 pic = populated ? PCI_EXP_SLTCTL_PIC_ON : PCI_EXP_SLTCTL_PIC_OFF; 387 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTCTL, pic); 388 } 389 390 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 391 PCI_EXP_SLTSTA_EIS |/* on reset, 392 the lock is released */ 393 PCI_EXP_SLTSTA_CC | 394 PCI_EXP_SLTSTA_PDC | 395 PCI_EXP_SLTSTA_ABP); 396 397 hotplug_event_update_event_status(dev); 398 } 399 400 void pcie_cap_slot_write_config(PCIDevice *dev, 401 uint32_t addr, uint32_t val, int len) 402 { 403 uint32_t pos = dev->exp.exp_cap; 404 uint8_t *exp_cap = dev->config + pos; 405 uint16_t sltsta = pci_get_word(exp_cap + PCI_EXP_SLTSTA); 406 407 if (ranges_overlap(addr, len, pos + PCI_EXP_SLTSTA, 2)) { 408 hotplug_event_clear(dev); 409 } 410 411 if (!ranges_overlap(addr, len, pos + PCI_EXP_SLTCTL, 2)) { 412 return; 413 } 414 415 if (pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTCTL, 416 PCI_EXP_SLTCTL_EIC)) { 417 sltsta ^= PCI_EXP_SLTSTA_EIS; /* toggle PCI_EXP_SLTSTA_EIS bit */ 418 pci_set_word(exp_cap + PCI_EXP_SLTSTA, sltsta); 419 PCIE_DEV_PRINTF(dev, "PCI_EXP_SLTCTL_EIC: " 420 "sltsta -> 0x%02"PRIx16"\n", 421 sltsta); 422 } 423 424 /* 425 * If the slot is polulated, power indicator is off and power 426 * controller is off, it is safe to detach the devices. 427 */ 428 if ((sltsta & PCI_EXP_SLTSTA_PDS) && (val & PCI_EXP_SLTCTL_PCC) && 429 ((val & PCI_EXP_SLTCTL_PIC_OFF) == PCI_EXP_SLTCTL_PIC_OFF)) { 430 PCIBus *sec_bus = pci_bridge_get_sec_bus(PCI_BRIDGE(dev)); 431 pci_for_each_device(sec_bus, pci_bus_num(sec_bus), 432 pcie_unplug_device, NULL); 433 434 pci_word_test_and_clear_mask(exp_cap + PCI_EXP_SLTSTA, 435 PCI_EXP_SLTSTA_PDS); 436 pci_word_test_and_set_mask(exp_cap + PCI_EXP_SLTSTA, 437 PCI_EXP_SLTSTA_PDC); 438 } 439 440 hotplug_event_notify(dev); 441 442 /* 443 * 6.7.3.2 Command Completed Events 444 * 445 * Software issues a command to a hot-plug capable Downstream Port by 446 * issuing a write transaction that targets any portion of the Port’s Slot 447 * Control register. A single write to the Slot Control register is 448 * considered to be a single command, even if the write affects more than 449 * one field in the Slot Control register. In response to this transaction, 450 * the Port must carry out the requested actions and then set the 451 * associated status field for the command completed event. */ 452 453 /* Real hardware might take a while to complete requested command because 454 * physical movement would be involved like locking the electromechanical 455 * lock. However in our case, command is completed instantaneously above, 456 * so send a command completion event right now. 457 */ 458 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_CCI); 459 } 460 461 int pcie_cap_slot_post_load(void *opaque, int version_id) 462 { 463 PCIDevice *dev = opaque; 464 hotplug_event_update_event_status(dev); 465 return 0; 466 } 467 468 void pcie_cap_slot_push_attention_button(PCIDevice *dev) 469 { 470 pcie_cap_slot_event(dev, PCI_EXP_HP_EV_ABP); 471 } 472 473 /* root control/capabilities/status. PME isn't emulated for now */ 474 void pcie_cap_root_init(PCIDevice *dev) 475 { 476 pci_set_word(dev->wmask + dev->exp.exp_cap + PCI_EXP_RTCTL, 477 PCI_EXP_RTCTL_SECEE | PCI_EXP_RTCTL_SENFEE | 478 PCI_EXP_RTCTL_SEFEE); 479 } 480 481 void pcie_cap_root_reset(PCIDevice *dev) 482 { 483 pci_set_word(dev->config + dev->exp.exp_cap + PCI_EXP_RTCTL, 0); 484 } 485 486 /* function level reset(FLR) */ 487 void pcie_cap_flr_init(PCIDevice *dev) 488 { 489 pci_long_test_and_set_mask(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCAP, 490 PCI_EXP_DEVCAP_FLR); 491 492 /* Although reading BCR_FLR returns always 0, 493 * the bit is made writable here in order to detect the 1b is written 494 * pcie_cap_flr_write_config() test-and-clear the bit, so 495 * this bit always returns 0 to the guest. 496 */ 497 pci_word_test_and_set_mask(dev->wmask + dev->exp.exp_cap + PCI_EXP_DEVCTL, 498 PCI_EXP_DEVCTL_BCR_FLR); 499 } 500 501 void pcie_cap_flr_write_config(PCIDevice *dev, 502 uint32_t addr, uint32_t val, int len) 503 { 504 uint8_t *devctl = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL; 505 if (pci_get_word(devctl) & PCI_EXP_DEVCTL_BCR_FLR) { 506 /* Clear PCI_EXP_DEVCTL_BCR_FLR after invoking the reset handler 507 so the handler can detect FLR by looking at this bit. */ 508 pci_device_reset(dev); 509 pci_word_test_and_clear_mask(devctl, PCI_EXP_DEVCTL_BCR_FLR); 510 } 511 } 512 513 /* Alternative Routing-ID Interpretation (ARI) 514 * forwarding support for root and downstream ports 515 */ 516 void pcie_cap_arifwd_init(PCIDevice *dev) 517 { 518 uint32_t pos = dev->exp.exp_cap; 519 pci_long_test_and_set_mask(dev->config + pos + PCI_EXP_DEVCAP2, 520 PCI_EXP_DEVCAP2_ARI); 521 pci_long_test_and_set_mask(dev->wmask + pos + PCI_EXP_DEVCTL2, 522 PCI_EXP_DEVCTL2_ARI); 523 } 524 525 void pcie_cap_arifwd_reset(PCIDevice *dev) 526 { 527 uint8_t *devctl2 = dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2; 528 pci_long_test_and_clear_mask(devctl2, PCI_EXP_DEVCTL2_ARI); 529 } 530 531 bool pcie_cap_is_arifwd_enabled(const PCIDevice *dev) 532 { 533 if (!pci_is_express(dev)) { 534 return false; 535 } 536 if (!dev->exp.exp_cap) { 537 return false; 538 } 539 540 return pci_get_long(dev->config + dev->exp.exp_cap + PCI_EXP_DEVCTL2) & 541 PCI_EXP_DEVCTL2_ARI; 542 } 543 544 /************************************************************************** 545 * pci express extended capability list management functions 546 * uint16_t ext_cap_id (16 bit) 547 * uint8_t cap_ver (4 bit) 548 * uint16_t cap_offset (12 bit) 549 * uint16_t ext_cap_size 550 */ 551 552 static uint16_t pcie_find_capability_list(PCIDevice *dev, uint16_t cap_id, 553 uint16_t *prev_p) 554 { 555 uint16_t prev = 0; 556 uint16_t next; 557 uint32_t header = pci_get_long(dev->config + PCI_CONFIG_SPACE_SIZE); 558 559 if (!header) { 560 /* no extended capability */ 561 next = 0; 562 goto out; 563 } 564 for (next = PCI_CONFIG_SPACE_SIZE; next; 565 prev = next, next = PCI_EXT_CAP_NEXT(header)) { 566 567 assert(next >= PCI_CONFIG_SPACE_SIZE); 568 assert(next <= PCIE_CONFIG_SPACE_SIZE - 8); 569 570 header = pci_get_long(dev->config + next); 571 if (PCI_EXT_CAP_ID(header) == cap_id) { 572 break; 573 } 574 } 575 576 out: 577 if (prev_p) { 578 *prev_p = prev; 579 } 580 return next; 581 } 582 583 uint16_t pcie_find_capability(PCIDevice *dev, uint16_t cap_id) 584 { 585 return pcie_find_capability_list(dev, cap_id, NULL); 586 } 587 588 static void pcie_ext_cap_set_next(PCIDevice *dev, uint16_t pos, uint16_t next) 589 { 590 uint32_t header = pci_get_long(dev->config + pos); 591 assert(!(next & (PCI_EXT_CAP_ALIGN - 1))); 592 header = (header & ~PCI_EXT_CAP_NEXT_MASK) | 593 ((next << PCI_EXT_CAP_NEXT_SHIFT) & PCI_EXT_CAP_NEXT_MASK); 594 pci_set_long(dev->config + pos, header); 595 } 596 597 /* 598 * caller must supply valid (offset, size) * such that the range shouldn't 599 * overlap with other capability or other registers. 600 * This function doesn't check it. 601 */ 602 void pcie_add_capability(PCIDevice *dev, 603 uint16_t cap_id, uint8_t cap_ver, 604 uint16_t offset, uint16_t size) 605 { 606 uint32_t header; 607 uint16_t next; 608 609 assert(offset >= PCI_CONFIG_SPACE_SIZE); 610 assert(offset < offset + size); 611 assert(offset + size <= PCIE_CONFIG_SPACE_SIZE); 612 assert(size >= 8); 613 assert(pci_is_express(dev)); 614 615 if (offset == PCI_CONFIG_SPACE_SIZE) { 616 header = pci_get_long(dev->config + offset); 617 next = PCI_EXT_CAP_NEXT(header); 618 } else { 619 uint16_t prev; 620 621 /* 0 is reserved cap id. use internally to find the last capability 622 in the linked list */ 623 next = pcie_find_capability_list(dev, 0, &prev); 624 625 assert(prev >= PCI_CONFIG_SPACE_SIZE); 626 assert(next == 0); 627 pcie_ext_cap_set_next(dev, prev, offset); 628 } 629 pci_set_long(dev->config + offset, PCI_EXT_CAP(cap_id, cap_ver, next)); 630 631 /* Make capability read-only by default */ 632 memset(dev->wmask + offset, 0, size); 633 memset(dev->w1cmask + offset, 0, size); 634 /* Check capability by default */ 635 memset(dev->cmask + offset, 0xFF, size); 636 } 637 638 /************************************************************************** 639 * pci express extended capability helper functions 640 */ 641 642 /* ARI */ 643 void pcie_ari_init(PCIDevice *dev, uint16_t offset, uint16_t nextfn) 644 { 645 pcie_add_capability(dev, PCI_EXT_CAP_ID_ARI, PCI_ARI_VER, 646 offset, PCI_ARI_SIZEOF); 647 pci_set_long(dev->config + offset + PCI_ARI_CAP, (nextfn & 0xff) << 8); 648 } 649