1 /* 2 * QEMU Ultrasparc Sabre PCI host (PBM) 3 * 4 * Copyright (c) 2006 Fabrice Bellard 5 * Copyright (c) 2012,2013 Artyom Tarasenko 6 * Copyright (c) 2018 Mark Cave-Ayland 7 * 8 * Permission is hereby granted, free of charge, to any person obtaining a copy 9 * of this software and associated documentation files (the "Software"), to deal 10 * in the Software without restriction, including without limitation the rights 11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 12 * copies of the Software, and to permit persons to whom the Software is 13 * furnished to do so, subject to the following conditions: 14 * 15 * The above copyright notice and this permission notice shall be included in 16 * all copies or substantial portions of the Software. 17 * 18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 24 * THE SOFTWARE. 25 */ 26 27 #include "qemu/osdep.h" 28 #include "hw/sysbus.h" 29 #include "hw/pci/pci.h" 30 #include "hw/pci/pci_host.h" 31 #include "hw/pci/pci_bridge.h" 32 #include "hw/pci/pci_bus.h" 33 #include "hw/pci-bridge/simba.h" 34 #include "hw/pci-host/sabre.h" 35 #include "sysemu/sysemu.h" 36 #include "exec/address-spaces.h" 37 #include "qapi/error.h" 38 #include "qemu/log.h" 39 #include "trace.h" 40 41 /* 42 * Chipset docs: 43 * PBM: "UltraSPARC IIi User's Manual", 44 * http://www.sun.com/processors/manuals/805-0087.pdf 45 */ 46 47 #define PBM_PCI_IMR_MASK 0x7fffffff 48 #define PBM_PCI_IMR_ENABLED 0x80000000 49 50 #define POR (1U << 31) 51 #define SOFT_POR (1U << 30) 52 #define SOFT_XIR (1U << 29) 53 #define BTN_POR (1U << 28) 54 #define BTN_XIR (1U << 27) 55 #define RESET_MASK 0xf8000000 56 #define RESET_WCMASK 0x98000000 57 #define RESET_WMASK 0x60000000 58 59 #define NO_IRQ_REQUEST (MAX_IVEC + 1) 60 61 static inline void sabre_set_request(SabreState *s, unsigned int irq_num) 62 { 63 trace_sabre_set_request(irq_num); 64 s->irq_request = irq_num; 65 qemu_set_irq(s->ivec_irqs[irq_num], 1); 66 } 67 68 static inline void sabre_check_irqs(SabreState *s) 69 { 70 unsigned int i; 71 72 /* Previous request is not acknowledged, resubmit */ 73 if (s->irq_request != NO_IRQ_REQUEST) { 74 sabre_set_request(s, s->irq_request); 75 return; 76 } 77 /* no request pending */ 78 if (s->pci_irq_in == 0ULL) { 79 return; 80 } 81 for (i = 0; i < 32; i++) { 82 if (s->pci_irq_in & (1ULL << i)) { 83 if (s->pci_irq_map[i >> 2] & PBM_PCI_IMR_ENABLED) { 84 sabre_set_request(s, i); 85 return; 86 } 87 } 88 } 89 for (i = 32; i < 64; i++) { 90 if (s->pci_irq_in & (1ULL << i)) { 91 if (s->obio_irq_map[i - 32] & PBM_PCI_IMR_ENABLED) { 92 sabre_set_request(s, i); 93 break; 94 } 95 } 96 } 97 } 98 99 static inline void sabre_clear_request(SabreState *s, unsigned int irq_num) 100 { 101 trace_sabre_clear_request(irq_num); 102 qemu_set_irq(s->ivec_irqs[irq_num], 0); 103 s->irq_request = NO_IRQ_REQUEST; 104 } 105 106 static AddressSpace *sabre_pci_dma_iommu(PCIBus *bus, void *opaque, int devfn) 107 { 108 IOMMUState *is = opaque; 109 110 return &is->iommu_as; 111 } 112 113 static void sabre_config_write(void *opaque, hwaddr addr, 114 uint64_t val, unsigned size) 115 { 116 SabreState *s = opaque; 117 118 trace_sabre_config_write(addr, val); 119 120 switch (addr & 0xffff) { 121 case 0x30 ... 0x4f: /* DMA error registers */ 122 /* XXX: not implemented yet */ 123 break; 124 case 0xc00 ... 0xc3f: /* PCI interrupt control */ 125 if (addr & 4) { 126 unsigned int ino = (addr & 0x3f) >> 3; 127 s->pci_irq_map[ino] &= PBM_PCI_IMR_MASK; 128 s->pci_irq_map[ino] |= val & ~PBM_PCI_IMR_MASK; 129 if ((s->irq_request == ino) && !(val & ~PBM_PCI_IMR_MASK)) { 130 sabre_clear_request(s, ino); 131 } 132 sabre_check_irqs(s); 133 } 134 break; 135 case 0x1000 ... 0x107f: /* OBIO interrupt control */ 136 if (addr & 4) { 137 unsigned int ino = ((addr & 0xff) >> 3); 138 s->obio_irq_map[ino] &= PBM_PCI_IMR_MASK; 139 s->obio_irq_map[ino] |= val & ~PBM_PCI_IMR_MASK; 140 if ((s->irq_request == (ino | 0x20)) 141 && !(val & ~PBM_PCI_IMR_MASK)) { 142 sabre_clear_request(s, ino | 0x20); 143 } 144 sabre_check_irqs(s); 145 } 146 break; 147 case 0x1400 ... 0x14ff: /* PCI interrupt clear */ 148 if (addr & 4) { 149 unsigned int ino = (addr & 0xff) >> 5; 150 if ((s->irq_request / 4) == ino) { 151 sabre_clear_request(s, s->irq_request); 152 sabre_check_irqs(s); 153 } 154 } 155 break; 156 case 0x1800 ... 0x1860: /* OBIO interrupt clear */ 157 if (addr & 4) { 158 unsigned int ino = ((addr & 0xff) >> 3) | 0x20; 159 if (s->irq_request == ino) { 160 sabre_clear_request(s, ino); 161 sabre_check_irqs(s); 162 } 163 } 164 break; 165 case 0x2000 ... 0x202f: /* PCI control */ 166 s->pci_control[(addr & 0x3f) >> 2] = val; 167 break; 168 case 0xf020 ... 0xf027: /* Reset control */ 169 if (addr & 4) { 170 val &= RESET_MASK; 171 s->reset_control &= ~(val & RESET_WCMASK); 172 s->reset_control |= val & RESET_WMASK; 173 if (val & SOFT_POR) { 174 s->nr_resets = 0; 175 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 176 } else if (val & SOFT_XIR) { 177 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 178 } 179 } 180 break; 181 case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ 182 case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ 183 case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ 184 case 0xf000 ... 0xf01f: /* FFB config, memory control */ 185 /* we don't care */ 186 default: 187 break; 188 } 189 } 190 191 static uint64_t sabre_config_read(void *opaque, 192 hwaddr addr, unsigned size) 193 { 194 SabreState *s = opaque; 195 uint32_t val; 196 197 switch (addr & 0xffff) { 198 case 0x30 ... 0x4f: /* DMA error registers */ 199 val = 0; 200 /* XXX: not implemented yet */ 201 break; 202 case 0xc00 ... 0xc3f: /* PCI interrupt control */ 203 if (addr & 4) { 204 val = s->pci_irq_map[(addr & 0x3f) >> 3]; 205 } else { 206 val = 0; 207 } 208 break; 209 case 0x1000 ... 0x107f: /* OBIO interrupt control */ 210 if (addr & 4) { 211 val = s->obio_irq_map[(addr & 0xff) >> 3]; 212 } else { 213 val = 0; 214 } 215 break; 216 case 0x1080 ... 0x108f: /* PCI bus error */ 217 if (addr & 4) { 218 val = s->pci_err_irq_map[(addr & 0xf) >> 3]; 219 } else { 220 val = 0; 221 } 222 break; 223 case 0x2000 ... 0x202f: /* PCI control */ 224 val = s->pci_control[(addr & 0x3f) >> 2]; 225 break; 226 case 0xf020 ... 0xf027: /* Reset control */ 227 if (addr & 4) { 228 val = s->reset_control; 229 } else { 230 val = 0; 231 } 232 break; 233 case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ 234 case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ 235 case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ 236 case 0xf000 ... 0xf01f: /* FFB config, memory control */ 237 /* we don't care */ 238 default: 239 val = 0; 240 break; 241 } 242 trace_sabre_config_read(addr, val); 243 244 return val; 245 } 246 247 static const MemoryRegionOps sabre_config_ops = { 248 .read = sabre_config_read, 249 .write = sabre_config_write, 250 .endianness = DEVICE_BIG_ENDIAN, 251 }; 252 253 static void sabre_pci_config_write(void *opaque, hwaddr addr, 254 uint64_t val, unsigned size) 255 { 256 SabreState *s = opaque; 257 PCIHostState *phb = PCI_HOST_BRIDGE(s); 258 259 trace_sabre_pci_config_write(addr, val); 260 pci_data_write(phb->bus, addr, val, size); 261 } 262 263 static uint64_t sabre_pci_config_read(void *opaque, hwaddr addr, 264 unsigned size) 265 { 266 uint32_t ret; 267 SabreState *s = opaque; 268 PCIHostState *phb = PCI_HOST_BRIDGE(s); 269 270 ret = pci_data_read(phb->bus, addr, size); 271 trace_sabre_pci_config_read(addr, ret); 272 return ret; 273 } 274 275 /* The sabre host has an IRQ line for each IRQ line of each slot. */ 276 static int pci_sabre_map_irq(PCIDevice *pci_dev, int irq_num) 277 { 278 /* Return the irq as swizzled by the PBM */ 279 return irq_num; 280 } 281 282 static int pci_simbaA_map_irq(PCIDevice *pci_dev, int irq_num) 283 { 284 /* The on-board devices have fixed (legacy) OBIO intnos */ 285 switch (PCI_SLOT(pci_dev->devfn)) { 286 case 1: 287 /* Onboard NIC */ 288 return OBIO_NIC_IRQ; 289 case 3: 290 /* Onboard IDE */ 291 return OBIO_HDD_IRQ; 292 default: 293 /* Normal intno, fall through */ 294 break; 295 } 296 297 return ((PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f; 298 } 299 300 static int pci_simbaB_map_irq(PCIDevice *pci_dev, int irq_num) 301 { 302 return (0x10 + (PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f; 303 } 304 305 static void pci_sabre_set_irq(void *opaque, int irq_num, int level) 306 { 307 SabreState *s = opaque; 308 309 trace_sabre_pci_set_irq(irq_num, level); 310 311 /* PCI IRQ map onto the first 32 INO. */ 312 if (irq_num < 32) { 313 if (level) { 314 s->pci_irq_in |= 1ULL << irq_num; 315 if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) { 316 sabre_set_request(s, irq_num); 317 } 318 } else { 319 s->pci_irq_in &= ~(1ULL << irq_num); 320 } 321 } else { 322 /* OBIO IRQ map onto the next 32 INO. */ 323 if (level) { 324 trace_sabre_pci_set_obio_irq(irq_num, level); 325 s->pci_irq_in |= 1ULL << irq_num; 326 if ((s->irq_request == NO_IRQ_REQUEST) 327 && (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED)) { 328 sabre_set_request(s, irq_num); 329 } 330 } else { 331 s->pci_irq_in &= ~(1ULL << irq_num); 332 } 333 } 334 } 335 336 static void sabre_reset(DeviceState *d) 337 { 338 SabreState *s = SABRE_DEVICE(d); 339 PCIDevice *pci_dev; 340 unsigned int i; 341 uint16_t cmd; 342 343 for (i = 0; i < 8; i++) { 344 s->pci_irq_map[i] &= PBM_PCI_IMR_MASK; 345 } 346 for (i = 0; i < 32; i++) { 347 s->obio_irq_map[i] &= PBM_PCI_IMR_MASK; 348 } 349 350 s->irq_request = NO_IRQ_REQUEST; 351 s->pci_irq_in = 0ULL; 352 353 if (s->nr_resets++ == 0) { 354 /* Power on reset */ 355 s->reset_control = POR; 356 } 357 358 /* As this is the busA PCI bridge which contains the on-board devices 359 * attached to the ebus, ensure that we initially allow IO transactions 360 * so that we get the early serial console until OpenBIOS can properly 361 * configure the PCI bridge itself */ 362 pci_dev = PCI_DEVICE(s->bridgeA); 363 cmd = pci_get_word(pci_dev->config + PCI_COMMAND); 364 pci_set_word(pci_dev->config + PCI_COMMAND, cmd | PCI_COMMAND_IO); 365 pci_bridge_update_mappings(PCI_BRIDGE(pci_dev)); 366 } 367 368 static const MemoryRegionOps pci_config_ops = { 369 .read = sabre_pci_config_read, 370 .write = sabre_pci_config_write, 371 .endianness = DEVICE_LITTLE_ENDIAN, 372 }; 373 374 static void sabre_realize(DeviceState *dev, Error **errp) 375 { 376 SabreState *s = SABRE_DEVICE(dev); 377 PCIHostState *phb = PCI_HOST_BRIDGE(dev); 378 SysBusDevice *sbd = SYS_BUS_DEVICE(s); 379 PCIDevice *pci_dev; 380 381 /* sabre_config */ 382 sysbus_mmio_map(sbd, 0, s->special_base); 383 /* PCI configuration space */ 384 sysbus_mmio_map(sbd, 1, s->special_base + 0x1000000ULL); 385 /* pci_ioport */ 386 sysbus_mmio_map(sbd, 2, s->special_base + 0x2000000ULL); 387 388 memory_region_init(&s->pci_mmio, OBJECT(s), "pci-mmio", 0x100000000ULL); 389 memory_region_add_subregion(get_system_memory(), s->mem_base, 390 &s->pci_mmio); 391 392 phb->bus = pci_register_root_bus(dev, "pci", 393 pci_sabre_set_irq, pci_sabre_map_irq, s, 394 &s->pci_mmio, 395 &s->pci_ioport, 396 0, 32, TYPE_PCI_BUS); 397 398 pci_create_simple(phb->bus, 0, TYPE_SABRE_PCI_DEVICE); 399 400 /* IOMMU */ 401 memory_region_add_subregion_overlap(&s->sabre_config, 0x200, 402 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->iommu), 0), 1); 403 pci_setup_iommu(phb->bus, sabre_pci_dma_iommu, s->iommu); 404 405 /* APB secondary busses */ 406 pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 0), true, 407 TYPE_SIMBA_PCI_BRIDGE); 408 s->bridgeB = PCI_BRIDGE(pci_dev); 409 pci_bridge_map_irq(s->bridgeB, "pciB", pci_simbaB_map_irq); 410 qdev_init_nofail(&pci_dev->qdev); 411 412 pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 1), true, 413 TYPE_SIMBA_PCI_BRIDGE); 414 s->bridgeA = PCI_BRIDGE(pci_dev); 415 pci_bridge_map_irq(s->bridgeA, "pciA", pci_simbaA_map_irq); 416 qdev_init_nofail(&pci_dev->qdev); 417 } 418 419 static void sabre_init(Object *obj) 420 { 421 SabreState *s = SABRE_DEVICE(obj); 422 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 423 unsigned int i; 424 425 for (i = 0; i < 8; i++) { 426 s->pci_irq_map[i] = (0x1f << 6) | (i << 2); 427 } 428 for (i = 0; i < 2; i++) { 429 s->pci_err_irq_map[i] = (0x1f << 6) | 0x30; 430 } 431 for (i = 0; i < 32; i++) { 432 s->obio_irq_map[i] = ((0x1f << 6) | 0x20) + i; 433 } 434 qdev_init_gpio_in_named(DEVICE(s), pci_sabre_set_irq, "pbm-irq", MAX_IVEC); 435 qdev_init_gpio_out_named(DEVICE(s), s->ivec_irqs, "ivec-irq", MAX_IVEC); 436 s->irq_request = NO_IRQ_REQUEST; 437 s->pci_irq_in = 0ULL; 438 439 /* IOMMU */ 440 object_property_add_link(obj, "iommu", TYPE_SUN4U_IOMMU, 441 (Object **) &s->iommu, 442 qdev_prop_allow_set_link_before_realize, 443 0, NULL); 444 445 /* sabre_config */ 446 memory_region_init_io(&s->sabre_config, OBJECT(s), &sabre_config_ops, s, 447 "sabre-config", 0x10000); 448 /* at region 0 */ 449 sysbus_init_mmio(sbd, &s->sabre_config); 450 451 memory_region_init_io(&s->pci_config, OBJECT(s), &pci_config_ops, s, 452 "sabre-pci-config", 0x1000000); 453 /* at region 1 */ 454 sysbus_init_mmio(sbd, &s->pci_config); 455 456 /* pci_ioport */ 457 memory_region_init(&s->pci_ioport, OBJECT(s), "sabre-pci-ioport", 458 0x1000000); 459 460 /* at region 2 */ 461 sysbus_init_mmio(sbd, &s->pci_ioport); 462 } 463 464 static void sabre_pci_realize(PCIDevice *d, Error **errp) 465 { 466 pci_set_word(d->config + PCI_COMMAND, 467 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 468 pci_set_word(d->config + PCI_STATUS, 469 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | 470 PCI_STATUS_DEVSEL_MEDIUM); 471 } 472 473 static void sabre_pci_class_init(ObjectClass *klass, void *data) 474 { 475 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 476 DeviceClass *dc = DEVICE_CLASS(klass); 477 478 k->realize = sabre_pci_realize; 479 k->vendor_id = PCI_VENDOR_ID_SUN; 480 k->device_id = PCI_DEVICE_ID_SUN_SABRE; 481 k->class_id = PCI_CLASS_BRIDGE_HOST; 482 /* 483 * PCI-facing part of the host bridge, not usable without the 484 * host-facing part, which can't be device_add'ed, yet. 485 */ 486 dc->user_creatable = false; 487 } 488 489 static const TypeInfo sabre_pci_info = { 490 .name = TYPE_SABRE_PCI_DEVICE, 491 .parent = TYPE_PCI_DEVICE, 492 .instance_size = sizeof(SabrePCIState), 493 .class_init = sabre_pci_class_init, 494 .interfaces = (InterfaceInfo[]) { 495 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 496 { }, 497 }, 498 }; 499 500 static Property sabre_properties[] = { 501 DEFINE_PROP_UINT64("special-base", SabreState, special_base, 0), 502 DEFINE_PROP_UINT64("mem-base", SabreState, mem_base, 0), 503 DEFINE_PROP_END_OF_LIST(), 504 }; 505 506 static void sabre_class_init(ObjectClass *klass, void *data) 507 { 508 DeviceClass *dc = DEVICE_CLASS(klass); 509 510 dc->realize = sabre_realize; 511 dc->reset = sabre_reset; 512 dc->props = sabre_properties; 513 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 514 } 515 516 static const TypeInfo sabre_info = { 517 .name = TYPE_SABRE, 518 .parent = TYPE_PCI_HOST_BRIDGE, 519 .instance_size = sizeof(SabreState), 520 .instance_init = sabre_init, 521 .class_init = sabre_class_init, 522 }; 523 524 static void sabre_register_types(void) 525 { 526 type_register_static(&sabre_info); 527 type_register_static(&sabre_pci_info); 528 } 529 530 type_init(sabre_register_types) 531