1 /* 2 * QEMU Ultrasparc Sabre PCI host (PBM) 3 * 4 * Copyright (c) 2006 Fabrice Bellard 5 * Copyright (c) 2012,2013 Artyom Tarasenko 6 * Copyright (c) 2018 Mark Cave-Ayland 7 * 8 * Permission is hereby granted, free of charge, to any person obtaining a copy 9 * of this software and associated documentation files (the "Software"), to deal 10 * in the Software without restriction, including without limitation the rights 11 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell 12 * copies of the Software, and to permit persons to whom the Software is 13 * furnished to do so, subject to the following conditions: 14 * 15 * The above copyright notice and this permission notice shall be included in 16 * all copies or substantial portions of the Software. 17 * 18 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR 19 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, 20 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL 21 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER 22 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, 23 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN 24 * THE SOFTWARE. 25 */ 26 27 #include "qemu/osdep.h" 28 #include "hw/sysbus.h" 29 #include "hw/pci/pci.h" 30 #include "hw/pci/pci_host.h" 31 #include "hw/qdev-properties.h" 32 #include "hw/pci/pci_bridge.h" 33 #include "hw/pci/pci_bus.h" 34 #include "hw/irq.h" 35 #include "hw/pci-bridge/simba.h" 36 #include "hw/pci-host/sabre.h" 37 #include "sysemu/sysemu.h" 38 #include "exec/address-spaces.h" 39 #include "qemu/log.h" 40 #include "qemu/module.h" 41 #include "trace.h" 42 43 /* 44 * Chipset docs: 45 * PBM: "UltraSPARC IIi User's Manual", 46 * http://www.sun.com/processors/manuals/805-0087.pdf 47 */ 48 49 #define PBM_PCI_IMR_MASK 0x7fffffff 50 #define PBM_PCI_IMR_ENABLED 0x80000000 51 52 #define POR (1U << 31) 53 #define SOFT_POR (1U << 30) 54 #define SOFT_XIR (1U << 29) 55 #define BTN_POR (1U << 28) 56 #define BTN_XIR (1U << 27) 57 #define RESET_MASK 0xf8000000 58 #define RESET_WCMASK 0x98000000 59 #define RESET_WMASK 0x60000000 60 61 #define NO_IRQ_REQUEST (MAX_IVEC + 1) 62 63 static inline void sabre_set_request(SabreState *s, unsigned int irq_num) 64 { 65 trace_sabre_set_request(irq_num); 66 s->irq_request = irq_num; 67 qemu_set_irq(s->ivec_irqs[irq_num], 1); 68 } 69 70 static inline void sabre_check_irqs(SabreState *s) 71 { 72 unsigned int i; 73 74 /* Previous request is not acknowledged, resubmit */ 75 if (s->irq_request != NO_IRQ_REQUEST) { 76 sabre_set_request(s, s->irq_request); 77 return; 78 } 79 /* no request pending */ 80 if (s->pci_irq_in == 0ULL) { 81 return; 82 } 83 for (i = 0; i < 32; i++) { 84 if (s->pci_irq_in & (1ULL << i)) { 85 if (s->pci_irq_map[i >> 2] & PBM_PCI_IMR_ENABLED) { 86 sabre_set_request(s, i); 87 return; 88 } 89 } 90 } 91 for (i = 32; i < 64; i++) { 92 if (s->pci_irq_in & (1ULL << i)) { 93 if (s->obio_irq_map[i - 32] & PBM_PCI_IMR_ENABLED) { 94 sabre_set_request(s, i); 95 break; 96 } 97 } 98 } 99 } 100 101 static inline void sabre_clear_request(SabreState *s, unsigned int irq_num) 102 { 103 trace_sabre_clear_request(irq_num); 104 qemu_set_irq(s->ivec_irqs[irq_num], 0); 105 s->irq_request = NO_IRQ_REQUEST; 106 } 107 108 static AddressSpace *sabre_pci_dma_iommu(PCIBus *bus, void *opaque, int devfn) 109 { 110 IOMMUState *is = opaque; 111 112 return &is->iommu_as; 113 } 114 115 static void sabre_config_write(void *opaque, hwaddr addr, 116 uint64_t val, unsigned size) 117 { 118 SabreState *s = opaque; 119 120 trace_sabre_config_write(addr, val); 121 122 switch (addr & 0xffff) { 123 case 0x30 ... 0x4f: /* DMA error registers */ 124 /* XXX: not implemented yet */ 125 break; 126 case 0xc00 ... 0xc3f: /* PCI interrupt control */ 127 if (addr & 4) { 128 unsigned int ino = (addr & 0x3f) >> 3; 129 s->pci_irq_map[ino] &= PBM_PCI_IMR_MASK; 130 s->pci_irq_map[ino] |= val & ~PBM_PCI_IMR_MASK; 131 if ((s->irq_request == ino) && !(val & ~PBM_PCI_IMR_MASK)) { 132 sabre_clear_request(s, ino); 133 } 134 sabre_check_irqs(s); 135 } 136 break; 137 case 0x1000 ... 0x107f: /* OBIO interrupt control */ 138 if (addr & 4) { 139 unsigned int ino = ((addr & 0xff) >> 3); 140 s->obio_irq_map[ino] &= PBM_PCI_IMR_MASK; 141 s->obio_irq_map[ino] |= val & ~PBM_PCI_IMR_MASK; 142 if ((s->irq_request == (ino | 0x20)) 143 && !(val & ~PBM_PCI_IMR_MASK)) { 144 sabre_clear_request(s, ino | 0x20); 145 } 146 sabre_check_irqs(s); 147 } 148 break; 149 case 0x1400 ... 0x14ff: /* PCI interrupt clear */ 150 if (addr & 4) { 151 unsigned int ino = (addr & 0xff) >> 5; 152 if ((s->irq_request / 4) == ino) { 153 sabre_clear_request(s, s->irq_request); 154 sabre_check_irqs(s); 155 } 156 } 157 break; 158 case 0x1800 ... 0x1860: /* OBIO interrupt clear */ 159 if (addr & 4) { 160 unsigned int ino = ((addr & 0xff) >> 3) | 0x20; 161 if (s->irq_request == ino) { 162 sabre_clear_request(s, ino); 163 sabre_check_irqs(s); 164 } 165 } 166 break; 167 case 0x2000 ... 0x202f: /* PCI control */ 168 s->pci_control[(addr & 0x3f) >> 2] = val; 169 break; 170 case 0xf020 ... 0xf027: /* Reset control */ 171 if (addr & 4) { 172 val &= RESET_MASK; 173 s->reset_control &= ~(val & RESET_WCMASK); 174 s->reset_control |= val & RESET_WMASK; 175 if (val & SOFT_POR) { 176 s->nr_resets = 0; 177 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 178 } else if (val & SOFT_XIR) { 179 qemu_system_reset_request(SHUTDOWN_CAUSE_GUEST_RESET); 180 } 181 } 182 break; 183 case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ 184 case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ 185 case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ 186 case 0xf000 ... 0xf01f: /* FFB config, memory control */ 187 /* we don't care */ 188 default: 189 break; 190 } 191 } 192 193 static uint64_t sabre_config_read(void *opaque, 194 hwaddr addr, unsigned size) 195 { 196 SabreState *s = opaque; 197 uint32_t val; 198 199 switch (addr & 0xffff) { 200 case 0x30 ... 0x4f: /* DMA error registers */ 201 val = 0; 202 /* XXX: not implemented yet */ 203 break; 204 case 0xc00 ... 0xc3f: /* PCI interrupt control */ 205 if (addr & 4) { 206 val = s->pci_irq_map[(addr & 0x3f) >> 3]; 207 } else { 208 val = 0; 209 } 210 break; 211 case 0x1000 ... 0x107f: /* OBIO interrupt control */ 212 if (addr & 4) { 213 val = s->obio_irq_map[(addr & 0xff) >> 3]; 214 } else { 215 val = 0; 216 } 217 break; 218 case 0x1080 ... 0x108f: /* PCI bus error */ 219 if (addr & 4) { 220 val = s->pci_err_irq_map[(addr & 0xf) >> 3]; 221 } else { 222 val = 0; 223 } 224 break; 225 case 0x2000 ... 0x202f: /* PCI control */ 226 val = s->pci_control[(addr & 0x3f) >> 2]; 227 break; 228 case 0xf020 ... 0xf027: /* Reset control */ 229 if (addr & 4) { 230 val = s->reset_control; 231 } else { 232 val = 0; 233 } 234 break; 235 case 0x5000 ... 0x51cf: /* PIO/DMA diagnostics */ 236 case 0xa400 ... 0xa67f: /* IOMMU diagnostics */ 237 case 0xa800 ... 0xa80f: /* Interrupt diagnostics */ 238 case 0xf000 ... 0xf01f: /* FFB config, memory control */ 239 /* we don't care */ 240 default: 241 val = 0; 242 break; 243 } 244 trace_sabre_config_read(addr, val); 245 246 return val; 247 } 248 249 static const MemoryRegionOps sabre_config_ops = { 250 .read = sabre_config_read, 251 .write = sabre_config_write, 252 .endianness = DEVICE_BIG_ENDIAN, 253 }; 254 255 static void sabre_pci_config_write(void *opaque, hwaddr addr, 256 uint64_t val, unsigned size) 257 { 258 SabreState *s = opaque; 259 PCIHostState *phb = PCI_HOST_BRIDGE(s); 260 261 trace_sabre_pci_config_write(addr, val); 262 pci_data_write(phb->bus, addr, val, size); 263 } 264 265 static uint64_t sabre_pci_config_read(void *opaque, hwaddr addr, 266 unsigned size) 267 { 268 uint32_t ret; 269 SabreState *s = opaque; 270 PCIHostState *phb = PCI_HOST_BRIDGE(s); 271 272 ret = pci_data_read(phb->bus, addr, size); 273 trace_sabre_pci_config_read(addr, ret); 274 return ret; 275 } 276 277 /* The sabre host has an IRQ line for each IRQ line of each slot. */ 278 static int pci_sabre_map_irq(PCIDevice *pci_dev, int irq_num) 279 { 280 /* Return the irq as swizzled by the PBM */ 281 return irq_num; 282 } 283 284 static int pci_simbaA_map_irq(PCIDevice *pci_dev, int irq_num) 285 { 286 /* The on-board devices have fixed (legacy) OBIO intnos */ 287 switch (PCI_SLOT(pci_dev->devfn)) { 288 case 1: 289 /* Onboard NIC */ 290 return OBIO_NIC_IRQ; 291 case 3: 292 /* Onboard IDE */ 293 return OBIO_HDD_IRQ; 294 default: 295 /* Normal intno, fall through */ 296 break; 297 } 298 299 return ((PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f; 300 } 301 302 static int pci_simbaB_map_irq(PCIDevice *pci_dev, int irq_num) 303 { 304 return (0x10 + (PCI_SLOT(pci_dev->devfn) << 2) + irq_num) & 0x1f; 305 } 306 307 static void pci_sabre_set_irq(void *opaque, int irq_num, int level) 308 { 309 SabreState *s = opaque; 310 311 trace_sabre_pci_set_irq(irq_num, level); 312 313 /* PCI IRQ map onto the first 32 INO. */ 314 if (irq_num < 32) { 315 if (level) { 316 s->pci_irq_in |= 1ULL << irq_num; 317 if (s->pci_irq_map[irq_num >> 2] & PBM_PCI_IMR_ENABLED) { 318 sabre_set_request(s, irq_num); 319 } 320 } else { 321 s->pci_irq_in &= ~(1ULL << irq_num); 322 } 323 } else { 324 /* OBIO IRQ map onto the next 32 INO. */ 325 if (level) { 326 trace_sabre_pci_set_obio_irq(irq_num, level); 327 s->pci_irq_in |= 1ULL << irq_num; 328 if ((s->irq_request == NO_IRQ_REQUEST) 329 && (s->obio_irq_map[irq_num - 32] & PBM_PCI_IMR_ENABLED)) { 330 sabre_set_request(s, irq_num); 331 } 332 } else { 333 s->pci_irq_in &= ~(1ULL << irq_num); 334 } 335 } 336 } 337 338 static void sabre_reset(DeviceState *d) 339 { 340 SabreState *s = SABRE_DEVICE(d); 341 PCIDevice *pci_dev; 342 unsigned int i; 343 uint16_t cmd; 344 345 for (i = 0; i < 8; i++) { 346 s->pci_irq_map[i] &= PBM_PCI_IMR_MASK; 347 } 348 for (i = 0; i < 32; i++) { 349 s->obio_irq_map[i] &= PBM_PCI_IMR_MASK; 350 } 351 352 s->irq_request = NO_IRQ_REQUEST; 353 s->pci_irq_in = 0ULL; 354 355 if (s->nr_resets++ == 0) { 356 /* Power on reset */ 357 s->reset_control = POR; 358 } 359 360 /* As this is the busA PCI bridge which contains the on-board devices 361 * attached to the ebus, ensure that we initially allow IO transactions 362 * so that we get the early serial console until OpenBIOS can properly 363 * configure the PCI bridge itself */ 364 pci_dev = PCI_DEVICE(s->bridgeA); 365 cmd = pci_get_word(pci_dev->config + PCI_COMMAND); 366 pci_set_word(pci_dev->config + PCI_COMMAND, cmd | PCI_COMMAND_IO); 367 pci_bridge_update_mappings(PCI_BRIDGE(pci_dev)); 368 } 369 370 static const MemoryRegionOps pci_config_ops = { 371 .read = sabre_pci_config_read, 372 .write = sabre_pci_config_write, 373 .endianness = DEVICE_LITTLE_ENDIAN, 374 }; 375 376 static void sabre_realize(DeviceState *dev, Error **errp) 377 { 378 SabreState *s = SABRE_DEVICE(dev); 379 PCIHostState *phb = PCI_HOST_BRIDGE(dev); 380 SysBusDevice *sbd = SYS_BUS_DEVICE(s); 381 PCIDevice *pci_dev; 382 383 /* sabre_config */ 384 sysbus_mmio_map(sbd, 0, s->special_base); 385 /* PCI configuration space */ 386 sysbus_mmio_map(sbd, 1, s->special_base + 0x1000000ULL); 387 /* pci_ioport */ 388 sysbus_mmio_map(sbd, 2, s->special_base + 0x2000000ULL); 389 390 memory_region_init(&s->pci_mmio, OBJECT(s), "pci-mmio", 0x100000000ULL); 391 memory_region_add_subregion(get_system_memory(), s->mem_base, 392 &s->pci_mmio); 393 394 phb->bus = pci_register_root_bus(dev, "pci", 395 pci_sabre_set_irq, pci_sabre_map_irq, s, 396 &s->pci_mmio, 397 &s->pci_ioport, 398 0, 32, TYPE_PCI_BUS); 399 400 pci_create_simple(phb->bus, 0, TYPE_SABRE_PCI_DEVICE); 401 402 /* IOMMU */ 403 memory_region_add_subregion_overlap(&s->sabre_config, 0x200, 404 sysbus_mmio_get_region(SYS_BUS_DEVICE(s->iommu), 0), 1); 405 pci_setup_iommu(phb->bus, sabre_pci_dma_iommu, s->iommu); 406 407 /* APB secondary busses */ 408 pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 0), true, 409 TYPE_SIMBA_PCI_BRIDGE); 410 s->bridgeB = PCI_BRIDGE(pci_dev); 411 pci_bridge_map_irq(s->bridgeB, "pciB", pci_simbaB_map_irq); 412 qdev_init_nofail(&pci_dev->qdev); 413 414 pci_dev = pci_create_multifunction(phb->bus, PCI_DEVFN(1, 1), true, 415 TYPE_SIMBA_PCI_BRIDGE); 416 s->bridgeA = PCI_BRIDGE(pci_dev); 417 pci_bridge_map_irq(s->bridgeA, "pciA", pci_simbaA_map_irq); 418 qdev_init_nofail(&pci_dev->qdev); 419 } 420 421 static void sabre_init(Object *obj) 422 { 423 SabreState *s = SABRE_DEVICE(obj); 424 SysBusDevice *sbd = SYS_BUS_DEVICE(obj); 425 unsigned int i; 426 427 for (i = 0; i < 8; i++) { 428 s->pci_irq_map[i] = (0x1f << 6) | (i << 2); 429 } 430 for (i = 0; i < 2; i++) { 431 s->pci_err_irq_map[i] = (0x1f << 6) | 0x30; 432 } 433 for (i = 0; i < 32; i++) { 434 s->obio_irq_map[i] = ((0x1f << 6) | 0x20) + i; 435 } 436 qdev_init_gpio_in_named(DEVICE(s), pci_sabre_set_irq, "pbm-irq", MAX_IVEC); 437 qdev_init_gpio_out_named(DEVICE(s), s->ivec_irqs, "ivec-irq", MAX_IVEC); 438 s->irq_request = NO_IRQ_REQUEST; 439 s->pci_irq_in = 0ULL; 440 441 /* IOMMU */ 442 object_property_add_link(obj, "iommu", TYPE_SUN4U_IOMMU, 443 (Object **) &s->iommu, 444 qdev_prop_allow_set_link_before_realize, 445 0, NULL); 446 447 /* sabre_config */ 448 memory_region_init_io(&s->sabre_config, OBJECT(s), &sabre_config_ops, s, 449 "sabre-config", 0x10000); 450 /* at region 0 */ 451 sysbus_init_mmio(sbd, &s->sabre_config); 452 453 memory_region_init_io(&s->pci_config, OBJECT(s), &pci_config_ops, s, 454 "sabre-pci-config", 0x1000000); 455 /* at region 1 */ 456 sysbus_init_mmio(sbd, &s->pci_config); 457 458 /* pci_ioport */ 459 memory_region_init(&s->pci_ioport, OBJECT(s), "sabre-pci-ioport", 460 0x1000000); 461 462 /* at region 2 */ 463 sysbus_init_mmio(sbd, &s->pci_ioport); 464 } 465 466 static void sabre_pci_realize(PCIDevice *d, Error **errp) 467 { 468 pci_set_word(d->config + PCI_COMMAND, 469 PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); 470 pci_set_word(d->config + PCI_STATUS, 471 PCI_STATUS_FAST_BACK | PCI_STATUS_66MHZ | 472 PCI_STATUS_DEVSEL_MEDIUM); 473 } 474 475 static void sabre_pci_class_init(ObjectClass *klass, void *data) 476 { 477 PCIDeviceClass *k = PCI_DEVICE_CLASS(klass); 478 DeviceClass *dc = DEVICE_CLASS(klass); 479 480 k->realize = sabre_pci_realize; 481 k->vendor_id = PCI_VENDOR_ID_SUN; 482 k->device_id = PCI_DEVICE_ID_SUN_SABRE; 483 k->class_id = PCI_CLASS_BRIDGE_HOST; 484 /* 485 * PCI-facing part of the host bridge, not usable without the 486 * host-facing part, which can't be device_add'ed, yet. 487 */ 488 dc->user_creatable = false; 489 } 490 491 static const TypeInfo sabre_pci_info = { 492 .name = TYPE_SABRE_PCI_DEVICE, 493 .parent = TYPE_PCI_DEVICE, 494 .instance_size = sizeof(SabrePCIState), 495 .class_init = sabre_pci_class_init, 496 .interfaces = (InterfaceInfo[]) { 497 { INTERFACE_CONVENTIONAL_PCI_DEVICE }, 498 { }, 499 }, 500 }; 501 502 static char *sabre_ofw_unit_address(const SysBusDevice *dev) 503 { 504 SabreState *s = SABRE_DEVICE(dev); 505 506 return g_strdup_printf("%x,%x", 507 (uint32_t)((s->special_base >> 32) & 0xffffffff), 508 (uint32_t)(s->special_base & 0xffffffff)); 509 } 510 511 static Property sabre_properties[] = { 512 DEFINE_PROP_UINT64("special-base", SabreState, special_base, 0), 513 DEFINE_PROP_UINT64("mem-base", SabreState, mem_base, 0), 514 DEFINE_PROP_END_OF_LIST(), 515 }; 516 517 static void sabre_class_init(ObjectClass *klass, void *data) 518 { 519 DeviceClass *dc = DEVICE_CLASS(klass); 520 SysBusDeviceClass *sbc = SYS_BUS_DEVICE_CLASS(klass); 521 522 dc->realize = sabre_realize; 523 dc->reset = sabre_reset; 524 dc->props = sabre_properties; 525 set_bit(DEVICE_CATEGORY_BRIDGE, dc->categories); 526 dc->fw_name = "pci"; 527 sbc->explicit_ofw_unit_address = sabre_ofw_unit_address; 528 } 529 530 static const TypeInfo sabre_info = { 531 .name = TYPE_SABRE, 532 .parent = TYPE_PCI_HOST_BRIDGE, 533 .instance_size = sizeof(SabreState), 534 .instance_init = sabre_init, 535 .class_init = sabre_class_init, 536 }; 537 538 static void sabre_register_types(void) 539 { 540 type_register_static(&sabre_info); 541 type_register_static(&sabre_pci_info); 542 } 543 544 type_init(sabre_register_types) 545